cedesmith's (L)ittle (K)ernel bootloader v1.3.3
Disclaimer
This comes with no warranties, if you use it you do it on your own risk.
Please read carefully the flowing information and make sure you know what you are doing.
I don't have time or patience for questions and support. If you use it you are on your own (well and this community).
Recovery
- CWM 3.0.1.4
Q&A
Q: What it is ?
A: A bootloader for android like magldr.
Q: Is it better then magldr ?
A1: NO, it is missing tetris .
A2: NO, magldr has some nice features like partitioning and rmnet.
Q: Can i use last 24MB of nand with this?
A: NO, SPL will erase them. When i have some time i may try to fix it.
Q: Does battery charge with this ?
A: YES, from version 1.3
Q: Does it boot WP7?
A: NO. I am only interested in android but in can load and execute any program.
Q: Should i install it ?
A: If you had to ask probably not. If has no functional benefits over magldr.
How To
Flash cLK
- make sure you have hspl
- enter SPL by holding VOL DOWN key while powering/resting the phone.
- flash with customruu like you would a windows rom and/or magldr
Flash a ROM
- download android sdk, you will need drivers and fastboot command from there
- fastboot flash recovery recovery.img
- after recovery you can reboot and use CWM or you can flash with fastboot (fastboot flash boot boot.img, fastboot flash system system.img, fastboot flash userdata userdata.img)
Start recovery / fastboot / text console
- holding down any key ( except power ) will show text console
- home key will enter recovery ( if flashed )
- back key will enter fastboot mode
Known issues
RMNET does not work.
Downloads
NBH
- RUU 1.3.3
- 1.3.3 and 1.4 are are exactly the same function wise, only tools used to build them is different (1.4 includes nbgen written by me to replace osnbtool and nbmerge)
- recovery.img
ROM
- see post #3
Source code
git link
compile on a linux machine with wine and codesourcery toolchain in path by executing "sh compile" in root of source
Credits
- codeaurrora for making LK and for making it open
- Martin Johnson for his tinboot witch was a great inspiration
- Martijn Stolk for his kernel segfault solving code and and cotulla for pointing it and his contribution to android on HD2
- all how worked on making linux kernel possible on hd2
kernel and recovery patches
17.03.2011
- small fix on get_boot_reason
- cwm off charge fully implemented, inspired by dan1j3l's code (http://gitorious.org/htc-hd2-android-libraries/cmon/blobs/master/cmon.c)
15.03.2011
- kernel patch to save reboot reason so is available on bootloader
- old patched in zip as pushed in most branches
25.02.2011
- CWM patch for charging, unpached CWM code is not properly reading kernel cmdline because /proc/cmdline file size is always 0 resulting in a always empty cmd line. I also changed the code to wait for key press then reboot phone to normal android.
20.02.2011
- cLK_power_clllapse patch adds detection of cLK to kernel and puts the reset vector at 0x11800000 where cLK will jump (+4) at power_collapse_exit
- off_mode_charging just prevents the kernel from BUG() if off mode charging and panel is off ( and not detectable )
- both of this patches are compatibile with current SD and magldr builds, please push them to your git trees
ROMS
HyperDroid-CM7 by pongster
cLK for Dummies by stirkac
Froyo Sense revolution 2.5 by arif-ali
CWM 3.0.1.4 with yes/no menu by seadersn
UD 3.1 by crawlingcity
Revolution HD v2.6 & SL v1.4 by arif-ali
TyphoonN 2.6.3 CM7 for cLK
- download cLK
- download recovery
- if you don't have it download fastboot,adb and drivers from here
- download TyphooN 2.6.3 Standard Edition rom from original thread
- download typhoon kernel(tytung_r7) and initrd for clk update
- put rom zip and clk update zip on sdcard
- unzip clk and recovery
- flash clk ruu
- fastboot flash recovery recovery.3.0.1.4_clk_1.3.3.img
- fastboot reboot
- hold HOME key down to boot recovery
- wipe data/factory reset (if not updating from my previous version)
- install zip from sdcard -> choose zip from sdcard -> TyphooN_CM7_v2.6.3.zip
- install zip from sdcard -> choose zip from sdcard -> typhoon2.6.3_tyung_r7_clk_update.zip
- wipe chache
Other?
- drop me a PM to include it on this post
clk changelog
1.4
nbgen for making .nb file
1.3.3
small fix on get_boot_reason
cwm off charge fully implemented, inspired by dan1j3l's code (http://gitorious.org/htc-hd2-android-libraries/cmon/blobs/master/cmon.c)
1.3.2
ROMHDR base addr is spl virtual 0x80000000 = 11800000 physical, LK will relocate to correct address (MEMBASE)
save reboot reason at 0x2FFB0000 (ramconsole - 0x1000 (PAGE_SIZE)) and @0x2FFB0004 XOR 0x004b4c63 (cLK signature)
added oem cmd to fastboot and oemcmd.bat for PC. supported commands are:
dmesg - kernel debug messages
smesg - spl messages
pwf addr len - dump memory
set[c,w,s] addr value - set char(1byte), word(4 byes), or string
Oh, I can't wait to try it.
Felicitari !!
Congratulation well done!
Regards,
Me
good stuff il second trying that
How do you flash those roms on that one ?
Sent from my HTC bravo using XDA App
can this be used as replacement for magldr?
if yes.. can i finally charge my battery while turned off?
Nice!!!!!!! downloading..............
good job
cant wait to try it
interesting
this is interesting, specially it is from cedesmith, seriously this man work is amazing, i was waiting for him to release his Desire HD2 as a nand build, but he surprised us with this, keep the good work man
cheers
hellfire666 said:
Nice!!!!!!! downloading..............
Click to expand...
Click to collapse
L0L downloading what
he just posted only the video
anyway nice to hear another bootloader for our Leos
faster bootloader? for replace magldr 1.11??
no offense, but I see "senior members" complaning on how people don't use search in these forums before posting the question, but let's look at this thread...
1. There is absolutely no info on why this software was written and what problems it's solving? I am sorry but most people are not mind readers.
2. Software gets "shown off" and bunch of "senior members" post replies of "thanks...." instead of using "Thanks" button. These posts are not adding any value.
hellfire666 said:
Nice!!!!!!! downloading..............
Click to expand...
Click to collapse
Errr no your not! There is no download yet wingnut!
-------------------------------------
I'm all for the HD2 dev growing and its second wind but what does this really do that magldr doesnt, Is there any advantages of using this rather then magldr because as far as I can tell it does the same (boot from nand) but without the extra functionality that we have option for on magldr?
So what would be (if any) the advantage of using this rather then magldr?
That isnt a dig or anything im just curious.
hi guys,
sorry for that question but, where is the benefit in this loader?
CLK vs. magldr???
thanks for what what does this do no info no download link nothing come come on lol this is useless
stony007_de said:
hi guys,
sorry for that question but, where is the benefit in this loader?
CLK vs. magldr???
Click to expand...
Click to collapse
is nor an replacement for magldr is an updated cmr, or an bootloader + cmr inside .i think that after watching video
cedesmith said:
Proud to present cedesmith's (L)ittle (K) v1.1
video
release and source code soon
Click to expand...
Click to collapse
OMG are you serious?
What about 24mb erasing HSPL issue?
Related
Disclaimer: For devs only. Updating to it will wipe your device. I am not responsible of any damage of any sort or data loss or anything. Alway do a nandroid backup before updating
Kernel android-msm-2.6.27-hero-community
The purpose of that community project is to have an optimized hero kernel based on HTC kernel sources.
Current release: 1.4 [download]
Features:
- compcache with ramzswap enabled
- /system/etc/init.d init scripts support
- some init script (firstboot, userinit)
- CIFS support
- Ext4 full support
- Removed DEBUG options
- All bluetooth options (don't know if needed ??)
- Droidwall support
- Pptp support (need testing)
- IP Gre tunnel module
- SquashFS 3.4
Links:
Git
Wiki
Issues tracker
Note: devs, as a community project, you patches or configuration corrections are welcomed. Feel free to submit.
Note: if anyone needs it, in the downloads section of the git there is the patch to apply to android-msm-2.6.27 sources so they compile for Hero.
Note: this kernel does not support modaco roms, the reason is that modaco rom is dependant of scripts called from kernel ramdisk, witch is not good. If you use Modaco rom, use teknologist kernel (http://ow.ly/yCxu) witch have similar tweaks
Changelog
Version 1.4 - Nov 3rd 2009
- added ext4 full support
- some init.d scripts (firstboot, userinit)
- squashfs 3.4
Version 1.3 - Nov 3rd 2009 (test build)
Version 1.2 - Nov 3rd 2009
- added ext4dev support (ext4 support in git, update.zip coming soon)
- added pptp support
- removed kernel debuging options
- added ramzswap init.d script
Version 1.1 - Oct 29th 2009
- added support for /data/init.sh script
- added support for /system/etc/init.d/* scripts
Version 1.0.1 - Oct 29th 2009
- fixed wlan.ko
Version 1.0 - Oct 28th 2009
- compcache 0.5.4 patch
- optimized config by Teknologist
Thanks for the hard work and more importantly sharing!..... this will be very useful once Ive got my oven sorted
Lox could you also post the version number of compcache that is integrated ? (and version numbers for future addons) cant wait to test the next release
Edit: Do i need to wipe the data before i update to this kernel? because i cant turn on wifi
whats the diff between AOSF CUPCAKE thread and this? these two projects do diff jobs? which will give us a basic android rom withot sense thing?
dying4004 said:
whats the diff between AOSF CUPCAKE thread and this? these two projects do diff jobs? which will give us a basic android rom withot sense thing?
Click to expand...
Click to collapse
This is the an optimized kernel to run any rom.
Lox_Dev said:
This is the an optimized kernel to run any rom.
Click to expand...
Click to collapse
WHOA!!!
LOX u have got really close in getting those nice roms and fancy stuffs in hero. so this is the base of all roms and fancy things.
CONGRATS BRO
New version 1.1.
Now you can have init scripts in /system/etc/init.d. /data/init.sh supported too.
To run Compache and have a really faster kernel, follow this how to. Busybox is needed (here is an update.zip to install it)
Lox_Dev said:
New version 1.1.
Now you can have init scripts in /system/etc/init.d. /data/init.sh supported too.
To run Compache and have a really faster kernel, follow this how to. Busybox is needed (here is an update.zip to install it)
Click to expand...
Click to collapse
could you also add little adb how-to for adding @ moving 05ramzswap file to init.d ?
i read all the references printed in first post, but there is nowhere a description of what has been optimized.. can someone please inform ;-)
felikz said:
i read all the references printed in first post, but there is nowhere a description of what has been optimized.. can someone please inform ;-)
Click to expand...
Click to collapse
second post maybe?
jaapschaap said:
second post maybe?
Click to expand...
Click to collapse
thats just the CHANGE LOG?
@ Lox_Dev
Thanks
This 05ramzswap script is correct?
#!/system/bin/sh
insmod /system/lib/modules/lzo_decompress.ko
insmod /system/lib/modules/lzo_compress.ko
insmod /system/lib/modules/compcache/xvmalloc.ko
/system/xbin/insmod /system/lib/modules/compcache/ramzswap.ko memlimit_kb=64200 backing_swap=/dev/block/mmcblk0p3
swapon /dev/block/ramzswap0
fi;
For building the rom, is correct added this line in update-script?
show_progress 0.5 0
show_progress 0.2 0
write_raw_image PACKAGE:boot.img BOOT:
show_progress 0.2 10
Thank you and sorry my english.
MACH_SAPPHIRE=y
Click to expand...
Click to collapse
Does this option is really necessary ?
thx lox, thread sticky
I managed to use nandroid's restoring method and put new boot.img back without any data wipe. Here is how I did it: Make a nandroid backup first, and copy the latest backup files to your computer, replace original boot.img to the new one(community version). Then edit the value of boot.img in nandroid.md5 to the proper content and match your new boot.img. Finally just restore it in recovery mode.
If the wireless function isn't working after boot, you may also need to push it via adb:
adb push wlan.ko /system/lib/modules/wlan.ko
adb shell sync
(reboot again)
foxfair said:
I managed to use nandroid's restoring method and put new boot.img back without any data wipe. Here is how I did it: Make a nandroid backup first, and copy the latest backup files to your computer, replace original boot.img to the new one(community version). Then edit the value of boot.img in nandroid.md5 to the proper content and match your new boot.img. Finally just restore it in recovery mode.
Click to expand...
Click to collapse
# adb push ./boot.img /sdcard
# adb shell flash_image boot /sdcard/boot.img
I little bit more fast... (but you should make a backup before)
Poischack said:
# adb push ./boot.img /sdcard
# adb shell flash_image boot /sdcard/boot.img
I little bit more fast... (but you should make a backup before)
Click to expand...
Click to collapse
i'm on RUU 2.73.x version, for some reason fastboot and adb push won't work... anyway I just provide an alternative way.
Lox did you try to upgrade to 2.6.29?
foxfair said:
Lox did you try to upgrade to 2.6.29?
Click to expand...
Click to collapse
Clone this git if you want to play:
git://android.git.kernel.org/kernel/msm.git branch android-msm-2.6.29
You WILL need to port over some of the drivers from the Hero kernel HTC released a while back (which was 2.6.27 btw).
Hi, folks
ClockworkMod Recovery (<- source).
"Changelog of ClockworkMod Recovery"
changes are here for some of the work we have done for support in RM
https://github.com/arif-ali/cLK
https://github.com/CyanogenMod/android_device_htc_leo
changes for the yes/no patch, and anything provided in this thread are here
https://github.com/arif-ali/android_bootable_recovery
https://github.com/arif-ali/android_device_htc_leo
If you cannot wait for new builds, then Arifs nightly builds are available here.
Features:
Based on 5.0.2.6 sources
Re-coded recovery and leo gits in few places to have the same CWR working for both MAGLDR and cLK
Fixed cLK with versioning in cLK to add clk=1.4.0.1 to /proc/cmdline
Now require cLK 1.4.0.1, rather than the 1.4 from cedesmith
Compiled using official Offmode-Charging Fix by Koush
Edited confirmation menu to show one "no" only
Re-arranged YES / NO: YES now is on first place
ReiserFS and NILFS Support
Offmode-Charging with cLK ONLY
SD-EXT backup / restore (no matter if Reiser, NILFS, ext 2/3/4)
You can flash this image easily from within Android; simply copy the file onto your sdcard and run following commands:
Code:
$ su
# flash_image recovery /sdcard/name_of_recovery_file.img
Maybe the flash_image command is not available on your build; you can find it attached. Copy it into /system/bin folder and run following in terminal emulator:
Code:
$ su
# chmod 777 /system/bin/flash_image
For cLK:
You need android sdk installed and path variable set in windoze to "*androidsdk*/platform-tools" and "*androidsdk*/tools" (alternatively you can copy the .img into the tools folder of android sdk and operate from there)
Flash appropiate cLK 1.4.0.1 layout from second post
Download the file attached
Boot your phone into fastboot mode (hold back key (left arrow) whilst powering on)
Open a command line by pressing "windoze key+r" and typing "cmd", followed by enter
Navigate to folder, which contains the recovery image
Type "fastboot erase recovery" (<- not really necessary; just to make sure), followed by enter
Type "fastboot flash recovery name_of_recovery_file.img", followed by enter
Type "fastboot reboot" for rebooting your phone
Access recovery as described in cedesmiths thread (hold home key whilst powering on)
You're done
Click to expand...
Click to collapse
For MAGLDR 1.13, booting from NAND:
Download the file attached
Download a partition layout incl. recovery from this thread which fits your ROM you want to use best and unzip it into "C:\recovery" for example
Copy over the recovery image file from inside the zip archive into this folder "C:\recovery", delete existing "recovery-raw.img" and rename copied image file to "recovery-raw.img"
Flash the recovery and partition layout using "DAF.exe" as usual and described in the thread of raiderx or the ROM provider
Boot Recovery with menu point "8. AD Recovery"
You're done
Note: For future updates of CWR it's best to set up a fixed boot partition size of 5M and not use the filesize flag in flash.cfg.
[/list]
Click to expand...
Click to collapse
For MAGLDR up to 1.13, booting from SDCard (SD-files version):
Download the file attached
Extract the files to the root directory of your sdcard
Start recovery within MAGLDR with menu point "AD SD"
Recovery should start
You're done
Click to expand...
Click to collapse
For both via CWR:
Download the *_CWR.zip file onto sdcard
Go into recovery by either holding home key in cLK or using the 8. AD to recovery in MAGLDR
Note: recovery-partition size of minimum 5MB needed
Select Install zip from sdcard
Select Choose zip from sdcard
Navigate/Select the recovery from the sdcard
Select yes to install the recovery
reboot into recovery, and hooray, you are in the new recovery
Click to expand...
Click to collapse
August 7, 2011
Newest sources 4.0.1.4
June 10, 2011
4.0.0.0 sources
Changelog of recovery:
- added the efs partition to the do not format list
- also fix up the /sdcard symlink on startup
- tar nandroid and /data/media support
June 8, 2011
3.2.0.1 sources
Changelog of recovery:
- Rename format_ignore_partitions to a forbid_format
- Fix 6 extentedcommands declaration warnings
June 3, 2011
3.2.0.0 sources
Added changes necessary for compiling "one recovery for all"
ClockworkmodRecovery now works for MAGLDR and cLK, no extra recovery for each loader
Added new cLK 1.4.0.1 partition layouts as attachment
Arif is continuing this for unknown time: thank you very much, Arif
April 18, 2011
3.0.2.4 sources; renamed to 3.0.2.5
Compiled with Koush's Offmode Charging fix
Attention: Filesize is ~ 1MB bigger than previous version due to new Offmode Charge Fix (i believe); it still fits into 5MB Recovery Partition Size
SD Version is only working if power or USB is plugged in -.- Working 3.0.2.4 Version here
April 13, 2011
Updated to newer 3.0.2.4 sources; see "changelog" link in first post
Full support for REISERFS & NILFS filesystems
cLK and MAGLDR will follow
Added zip file containing cedesmith's offmodecharging and my edits as "patch" (diff) file
Added another flash-method and attached the binary which is necessary
March 29, 2011
Added some cLK_1.4_partition layouts; attached on this post
Normal Cache-size Version (usable for most cases):
boot 5M
cache 44MB
recovery 5MB
misc 1MB
system 80-160MB in 10MB steps, 180-400 in 20MB steps
userdata = rest of available NAND
Small Cache-size Version (requires initrd.gz which links /cache to userdata partition):
boot 5M
cache 5MB
recovery 5MB
misc 1MB
system 80-160MB in 10MB steps, 180-400 in 20MB steps
userdata = rest of available NAND
stirkac made an exe installer with these layouts; it installs cLK and the desired layout automatically. You can find it here. Thank him
March 25, 2011
Updated to 3.0.2.4 sources
March 17, 2011
Updated to 3.0.1.9 sources
cLK was updated to latest patches from cedesmith incl. complete offmode charging support (LED color changing, button press behaviour etc)
March 15, 2011
Backup'n Restore does what it is intended to
cLK is running well and was updated to latest patches from cedesmith
MAGLDR is running well if restored backups are from same version
March 14, 2011
Second run, needs testing by MAGLDR users regarding full restore (mainly: Boot partition!)
cLK is running well
March 10, 2011
Initial release, 3.0.1.4, English only
Bug with MAGLDR; removed
Notes:
- Backups from a previous version can't be restored with this one. However, backups from this version are fully working.
- Offmode charging is only possible with cLK; MAGLDR up to 1.13 isn't capable about that at this time, maybe in future releases.
- MAGLDR Versions are untested by me, here i'll need your feedback, especially regarding restorings from earlier versions (e.g 3.0.1.4 backup restored in 3.0.1.9 = working or not).
CWM "ChangeLog", but w/o Version No.
Awesome. Only thing we really need now is a change log between different CWM versions as they come out.
PS>> Gave you an extra post in case you need it later.
hmm, i'll look around if an official changelog already exists, otherwise i have to figure this out and write for myself, yes.
and thx for extra post
Hard to find an actual version history... All I found was ROM Manager's version history:
http://gh-pages.clockworkmod.com/ROMManagerManifest/CHANGELOG.txt
Nice Work ..
Cool.. Will Save On The Poor Vol Down Key!
Nice Work ..
Cool nice job well done...
seadersn said:
hi, folks
after testing this out i've decided to make it public: my compiled and edited version of ClockworkMod Recovery.
download from multiupload.com
features:
based on newest 3.0.1.4
edited confirmation menu to show one "no" only
edited title to show "S.ClockworkMod Recovery 3.0.1.4" (for determination)
SD-EXT backup / restore incl.
this one is usable for both cLK & MAGLDR.
instructions:
this thread / recovery will be updated every 2-4 weeks, if new recovery is available.
have fun!
Click to expand...
Click to collapse
wooow~try it right now ! thank you!!
@ karendar: thx for looking too. but it seems, there isn't one available, not even in the sources... maybe @ forum, but haven't found sth until now.
EDIT
It works! : D
No more "No's": D
And the function "PowerOff" is rly nice
@seadersn,
kommt das auch auf Handy-FAQ?
Thnx
Greetings.
xD hab ich's mir doch gedacht jap, wird's voraussichtlich in den nächsten drei stunden.
jep, it will
Freu mich schon
Könntest du die ganze Recovery übersetzen [E-D]?
Oder ist das unmöglich?
Could you translate the whole recovery?
Or is that impossible?
nope, this isn't impossible; but this is really too much for me atm maybe in about a week, german only.
We can wait
You have so much time
Thnx.
Greetings.
seadersn said:
hi, folks
after testing this out i've decided to make it public: my compiled and edited version of ClockworkMod Recovery (<- source).
download from multiupload.com
features:
based on newest 3.0.1.4
edited confirmation menu to show one "no" only
edited title to show "S.ClockworkMod Recovery 3.0.1.4" (for determination)
SD-EXT backup / restore incl.
this one is usable for both cLK & MAGLDR.
Click to expand...
Click to collapse
BEAUTIFUL!
Can this be used with MAGLDR 1.11!?!?
If yes can you please provide me with the kernel and initrd to replace the existing ones on SDcard!?
Thx
seadersn said:
hi, folks
after testing this out i've decided to make it public: my compiled and edited version of ClockworkMod Recovery (<- source).
download from multiupload.com
features:
based on newest 3.0.1.4
edited confirmation menu to show one "no" only
edited title to show "S.ClockworkMod Recovery 3.0.1.4" (for determination)
SD-EXT backup / restore incl.
this one is usable for both cLK & MAGLDR.
instructions:
this thread / recovery will be updated every 2-4 weeks, if new recovery is available.
have fun!
Click to expand...
Click to collapse
Any chance you can add reiserfs and btrfs support when making a Nandroid Backup and Restore?
https://github.com/CyanogenMod/android_bootable_recovery#
Here's the original Github for the Gingerbread Clockwork recovery... I haven't programmed in so long I don't think I'm of any help with this.
Pongster, I'm digging through gits to see if anyone had this implemented already in a modded version.
hi,
thx for the github link; anyway i've already added it to the first post unfortunately a changelog or sth similar isn't arising from the sources but thx, again.
regarding reiser+btr: i don't know this much of programming, what i did was an (easy) change of existing code, but if it's already present in the source code and one only needs the mount points, this is no problem, i believe
i can have a further, deeper look into that, but it would take a while if it's not present and i have to change the code and i will definitively need help. no assurance about that
regarding magldr 1.11: life engineer, i will pm you a version for testing. maybe tomorrow morning, GMT+1?
@ spyros, from where do you know that i have plenty of time, he?
seadersn said:
hi,
thx for the github link; anyway i've already added it to the first post unfortunately a changelog or sth similar isn't arising from the sources but thx, again.
regarding reiser+btr: i don't know this much of programming, what i did was an (easy) change of existing code, but if it's already present in the source code and one only needs the mount points, this is no problem, i believe
i can have a further, deeper look into that, but it would take a while if it's not present and i have to change the code and i will definitively need help. no assurance about that
regarding magldr 1.11: life engineer, i will pm you a version for testing. maybe tomorrow morning, GMT+1?
@ spyros, from where do you know that i have plenty of time, he?
Click to expand...
Click to collapse
hey seadersn,
I have been looking at the compilation of recovery as well, and a thought about drivers came about. Which kernel are you using are using the same one in device/htc/leo, or the one compiled by cedesmith. I think in order to get the reiserfs or btrfs, then all we need to do is compile our own kernel with the mods, and put it in the right place and it should work.
I will give it a test with my kernel this evening
with respect to the initrd and zImage, that's easy to get, You need the following 2 files
out/target/product/leo/kernel
out/target/product/leo/ramdisk-recovery.img
but again this needs testing, unless someone else can confirm this
seadersn said:
hi,
thx for the github link; anyway i've already added it to the first post unfortunately a changelog or sth similar isn't arising from the sources but thx, again.
regarding reiser+btr: i don't know this much of programming, what i did was an (easy) change of existing code, but if it's already present in the source code and one only needs the mount points, this is no problem, i believe
i can have a further, deeper look into that, but it would take a while if it's not present and i have to change the code and i will definitively need help. no assurance about that
Click to expand...
Click to collapse
seadersn, check this out: Post from the desire forums... Looks like ReiserFS might be supported in Clockwork directly. Just need to edit .config:
http://forum.xda-developers.com/showpost.php?p=10488102&postcount=432
Alot of the kernels already have ReiserFS and btrfs, I believe...
Use at your own risk, overclock at your own risk - I'm not responsible for damage to your device
The kernel used in this ROM is based on MDJ S9.2, and have ported it, and have patched to the latest upstream with the relevant fixes
The git is available here, check logs and diffs for the changes made. There is a neat build script to get it compiled for yourself if you want as well in Linux or cygwin. I am using the test branch at the moment.
Howto cLK (kernel_aa_X.X.zip)
Click to expand...
Click to collapse
Download kernel
Unzip archive
run script.sh (linux) or script.bat (windows) to copy over the kernel modules to your phone (make sure adb is in your path)
grab the initrd.gz from your current rom
then, either
reboot phone into fastboot by holding the back key
run "fastboot -c "" -b 0x11800000 flash:raw boot zImage initrd.gz"
or
make boot.img by using "mkbootimg --kernel zImage --ramdisk initrd.gz --cmdline "console=null" --base 0x11800000 -o boot.img"
adb push boot.img /sdcard/
adb shell flash_image boot /sdcard/boot.img
reboot your phone
Howto MAGLDR CWM (kernel_aa_X.X.zip) & Howto cLK (kernel_aa_X.X_clk_ppp.zip)
Click to expand...
Click to collapse
Download kernel
copy archive onto the FAT partition of your SD card
reboot phone into CWM
Select Install zip from sdcard
Select choose zip from sdcard
Select the kernel from the SD
Select Yes to install the zip
reboot your phone
Differences between kernel_aa_X.X.zip and kernel_aa_X.X_clk_ppp.zip
Click to expand...
Click to collapse
my initrd (so has boot.img which will only work with cLK)
Added ppp specific stuff
Added 02recov, which allows to get ROM Manager working (works for me)
NOTE: The initrd may or may not work for everyone please report your problems with dmesg and logcat files
Thanks/credits
Click to expand...
Click to collapse
m-deejay
Cotulla (MAGLDR)
RaiderX303 (ClockworkMod)
cedesmith (cLK)
#htc-linux and #htc-linux-chat
All ROM users
Changelog
v0.6 (24/04/2011)
Add reiserfs support
Add NILFS support
Add btrfs support
v0.5 (21/03/2011)
Removed SMARTASS
Merged with master git
v0.4 (18/03/2011)
kernel patch to save reboot reason so is available on bootloader (credits to cedesmith)
v0.3 (01/03/2011)
Add back PPP support (to work with cLK)
Add cLK patches (credits to cedesmith)
more MDJ stuff config
v0.2 (14/02/2011)
re-cloned MDJ S9.2
Created branch test
Removed squashfs
Removed unnecessary PPP
Merged with master git
v0.1 (12/02/2011)
cloned MDJ S9.2
merged with master git
Previous Changelog from MDJ
Code:
S9.2:
- fixed wifi mac addresses ( http://www.gitorious.com/linux-on-wince-htc/linux_on_wince_htc/commit/4c31f2fb265ae68b82ed5e8ea4bec91208837011 )
S9.1:
- Initial Release
reserved another
Trying now
Sent from my HTC HD2 using XDA Premium App
Nice, thanks.....if i'm not wrong Mdj's kernel wasnt UV, right?
is it UV? afaik no
af974 said:
Nice, thanks.....if i'm not wrong Mdj's kernel wasnt UV, right?
Click to expand...
Click to collapse
afaik, it is not UV, I cannot see it in his changelogs
updated kernel see OP, changelog and git logs for details
Thanks so much. It's said that MDJ's kernel is extraordinary power-saving and low battery drainage. We have not seen Mr MDJ on the forum for quite a long time. We just hope you great guys to carry on the goodness of MDJ's kernel.
about time someone made a proper kernel for cLk ..thanks arif-ali
arif-ali said:
Use at your own risk, overclock at your own risk - I'm not responsible for damage to your device
The kernel used in this ROM is based on MDJ S9.2, and have ported it, and have patched to the latest upstream with the relevant fixes
The git is available here, check logs and diffs for the changes made. There is a neat build script to get it compiled for yourself if you want as well in Linux or cygwin. I am using the test branch at the moment.
Download kernel
Unzip archive
run script.sh (linux) or script.bat (windows) to copy over the kernel modules to your phone (make sure adb is in your path)
grab the initrd.gz from your current rom
then, either
reboot phone into fastboot by holding the back key
run "fastboot -c "" -b 0x11800000 flash:raw boot zImage initrd.gz"
or
make boot.img by using "mkbootimg --kernel zImage --ramdisk initrd.gz --cmdline "console=null" --base 0x11800000 -o boot.img"
adb push boot.img /sdcard/
adb shell flash_image boot /sdcard/boot.img
reboot your phone
Download kernel
copy archive onto the FAT partition of your SD card
reboot phone into CWM
Select Install zip from sdcard
Select choose zip from sdcard
Select the kernel from the SD
Select Yes to install the zip
reboot your phone
my initrd (so has boot.img which will only work with cLK)
Added ppp specific stuff
Added 02recov, which allows to get ROM Manager working (works for me)
NOTE: The initrd may or may not work for everyone please report your problems with dmesg and logcat files
m-deejay
Cotulla (MAGLDR)
RaiderX303 (ClockworkMod)
cedesmith (cLK)
#htc-linux and #htc-linux-chat
All ROM users
Click to expand...
Click to collapse
Can you please make a cLK CWM Kernel of your to use with Typhoons build...
I have tried it this way and is not working and I think that the file structure for Typhoon builds is different that common build.
I would like to try this kernel. Is it possible plz?
zach.antre said:
Can you please make a cLK CWM Kernel of your to use with Typhoons build...
I have tried it this way and is not working and I think that the file structure for Typhoon builds is different that common build.
I would like to try this kernel. Is it possible plz?
Click to expand...
Click to collapse
what problems are you getting, any logcats or dmesg output
arif-ali said:
what problems are you getting, any logcats or dmesg output
Click to expand...
Click to collapse
it was stuck in bootscreen, i will try to send later.
Till then you can check the GL_Core kernel thread that had same issue
he made a Kernel for Typhoon builds and a kernel for all others.
you can see the differencies
arif-ali said:
what problems are you getting, any logcats or dmesg output
Click to expand...
Click to collapse
here is the logcat
@zach.antre
I have added the 0.5 kernel with wpa in OP, This is the only difference I see between my kernel and the GL kernel.
I haven't tested it, so not sure if it will work.
If you do test it, let me know how it goes.
thanks
arif-ali said:
@zach.antre
I have added the 0.5 kernel with wpa in OP, This is the only difference I see between my kernel and the GL kernel.
I haven't tested it, so not sure if it will work.
If you do test it, let me know how it goes.
thanks
Click to expand...
Click to collapse
I'll test it know, give 5 minutes and i'll report back
------------------EDIT---------------------------
After testing your kernel again i get the same issues.
System will not start, it is stuck in bootscreen.
You will find attached the logcat
I should mention that TyphooNs build is nonSense, it is CM7
Not many use this, but hey, might as well release it
updated kernel to
* Add reiserfs support
* Add NILFS support
* Add btrfs support
arif-ali said:
Not many use this, but hey, might as well release it
updated kernel to
* Add reiserfs support
* Add NILFS support
* Add btrfs support
Click to expand...
Click to collapse
Hey Arif, what exactly is reiserfs, nilfs, btrfs?
mattfmartin said:
Hey Arif, what exactly is reiserfs, nilfs, btrfs?
Click to expand...
Click to collapse
they are all file systems, similar to ext2/3/4, but some people prefer these instead
plus this is the basis for the recovery kernel as well that is available on RM, so more I can support, the better
arif-ali said:
Not many use this, but hey, might as well release it
updated kernel to
* Add reiserfs support
* Add NILFS support
* Add btrfs support
Click to expand...
Click to collapse
Hi Arif, thanks for all the good work!
1) Does this kernel work for GB, or only Froyo?
2) Does cLK version incorporate any of the new ppp wrapper stuff discussed in cedesmith's thread?
Thanks!
lukedunk said:
Hi Arif, thanks for all the good work!
1) Does this kernel work for GB, or only Froyo?
2) Does cLK version incorporate any of the new ppp wrapper stuff discussed in cedesmith's thread?
Thanks!
Click to expand...
Click to collapse
1a) personally, haven't tested this in GB, so not sure. zach.antre tested it with one of the GB roms, and didn't quite work. I still need to do some testing, to see exactly what is different to make it work. (but you can still test if you want the challenge)
1b) This kernel is used as a basis for CWR that is on RM, so the fact it works there, and the basis there is GB, I would have thought that it would work with GB, but I could be wrong
2) No, as the wrapper is still beta at the moment (and several people are still having problems). Once we know that is working effectively with no problems, I will have no problems in adding it in.
HI everybody, I found my self a bit experienced in issues which can appear with GB ROMs for DHD (not so experienced to develop) so I can answer your questions in this thread or PM as you like.
For now I don't answer questions about CM* and MIUI* and not likely to answer questions about FroYo ROMS.
What's the wifi scan interval in ARHD 5.1.1?
It seems for me you know the answer?
EDIT: only now understand your question, as i remebmer it didn't change since FroYo, but I can test if you really need to know it..=)
45 Seconds, I honestly didn't know. Had to check myself.
I've got an easy question. how exactly(!) did you get MDJ's V8 kernel on your phone.
step by step, pls
greets and thanks
Thanks for info, honestly never thought about it because used wi-fi only in home/restraunts... so I used it when I need and then turn of..
Dave-Kay said:
I've got an easy question. how exactly(!) did you get MDJ's V8 kernel on your phone.
step by step, pls
greets and thanks
Click to expand...
Click to collapse
1) Download it from http://forum.xda-developers.com/showthread.php?t=1050106
2) copy it to your /sdcard
3a) Boot into recovery
4a) Select 'install zip from sdcard'
5a) Select 'choose zip from sdcard'
6a) Select your kenrel *zip
7a) w8 until flashed, go back and reboot
3b) Simply choose in ROM Manager 'Install zip from sdcard'
4b) Choose your kernel, and press ok in the appeared window (not necessary to change anything)
EDIT: Note that it will be shown in your kernel info as 'Unknown kernel' you can read about it in 'Issues' in the link i gave...
Thank you so much! I bet, it will be same procedure with everything around here, where everyone simply says "flash it with cwm"?
Greets
Yeap instead of cases when you have to wipe...
When you boot into recovery you'll find 'wipe' choose it and follow steps proposed is easy understandable
Va_Alexander said:
1) Download it from http://forum.xda-developers.com/showthread.php?t=1050106
2) copy it to your /sdcard
3a) Boot into recovery
4a) Select 'install zip from sdcard'
5a) Select 'choose zip from sdcard'
6a) Select your kenrel *zip
7a) w8 until flashed, go back and reboot
3b) Simply choose in ROM Manager 'Install zip from sdcard'
4b) Choose your kernel, and press ok in the appeared window (not necessary to change anything)
EDIT: Note that it will be shown in your kernel info as 'Unknown kernel' you can read about it in 'Issues' in the link i gave...
Click to expand...
Click to collapse
Would this be a similar process if I wanted to flash a MOD onto my ROM? So if I wanted to flash the Sense 3 lock screen or the CRT effect, would I do it in this way..? So boot phone into recovery and then select the *.zip file?
Cheers.
topgun06 said:
Would this be a similar process if I wanted to flash a MOD onto my ROM? So if I wanted to flash the Sense 3 lock screen or the CRT effect, would I do it in this way..? So boot phone into recovery and then select the *.zip file?
Cheers.
Click to expand...
Click to collapse
Yes it would. But not for radio. Note it please.
EDIT sorry gonna leave you now because my brother's breathing gonna make me drunk.... ))))
Va_Alexander said:
Yeap instead of cases when you have to wipe...
When you boot into recovery you'll find 'wipe' choose it and follow steps proposed is easy understandable
Click to expand...
Click to collapse
thx
i'm pretty new to this and everyone's speaking as speaking to the experts around here
i switched to arhd 5.x and was kind of wondering why i have to "flash" a mod for example
so your answer should be good enough fpr http://forum.xda-developers.com/showthread.php?t=1059283 ?
greets
Yes same procedure.
Edit see you tomorrow guys..
Va_Alexander said:
Yes it would. But not for radio. Note it please.
Click to expand...
Click to collapse
Dave-Kay said:
i switched to arhd 5.x and was kind of wondering why i have to "flash" a mod for example
so your answer should be good enough fpr http://forum.xda-developers.com/showthread.php?t=1059283 ?
Click to expand...
Click to collapse
Nice one! Id flashed to 5.1.1 and then the additional MODs caught my eye and I was just unsure how to flash them.
me too
I'm still on 5.1.0 and checking the possibilities. by now, I'm not keen on flashing the mods, 'cause mike just announced 5.1.2 and i wonder, how long it will take him to make it final. the way he works, it shouldn't be long, so i will be prepared, when he reaches this point and untill that, there's no need for me, to do nothing but flashing my device
Va_Alexander said:
HI everybody, I found my self a bit experienced in issues which can appear with GB ROMs for DHD (not so experienced to develop) so I can answer your questions in this thread or PM as you like.
For now I don't answer questions about CM* and MIUI* and not likely to answer questions about FroYo ROMS.
Click to expand...
Click to collapse
FOR TO KNOW WHERE ARE YOU IT IS NECESSARY TO KNOW WHEREFROM YOU COME
i I say this for it of not knowing of froyo and yes of gingerbread your "personalized Q&A " is incomplete LOL
Dave-Kay said:
me too
I'm still on 5.1.0 and checking the possibilities. by now, I'm not keen on flashing the mods, 'cause mike just announced 5.1.2 and i wonder, how long it will take him to make it final. the way he works, it shouldn't be long, so i will be prepared, when he reaches this point and untill that, there's no need for me, to do nothing but flashing my device
Click to expand...
Click to collapse
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?
Same here.
Hi topgun06
topgun06 said:
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?
Click to expand...
Click to collapse
mike1986. Wrote it in RED:-
Code:
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.2[/B] [02.05.2011][/COLOR] - [B]COMING SOON !!![/B]
- Added Wi-Fi fix
- Fixed Adobe Flash Player
- Removed Voice Commander for Telus / Inspire 4G users due to FC's
- Google Talk updated to latest 1.3
- Some more fixes to locations
- Other minor changes
[COLOR="Red"]- No need to full wipe if you have 5.1.x already![/COLOR]
[SIZE="1"]
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.1[/B][/COLOR]
- Fixed some missing locations
- Fixed microphone issue for Telus / Inspire 4G users
- Added checking signatures hack ([I]Thanks to capychimp[/I])
- Restored original Google Maps 5.3.1
- Rosie Notes Widget should be installed correctly
- Fully working Arabic Patch in the second post
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.0[/B][/COLOR]
- Re-based on new [B]official[/B] HTC Android 2.3.3 RUU 2.36.405.8
- Fully de-odexed, zipaligned, optimized etc.
- Added script that sets InstallLocation to 1 post boot ([I]Thanks to seo[/I])
- Google Maps 5.3.1 Premium mod included
- Adobe Flash Player updated to latest 10.2.157.51
- Notes widget updated for Android 2.3.3
- Fixed missing apps in Android Market
- Compatibility changes for branded devices
- Protips removed from system
- Some minor changes
[COLOR="Blue"][B]Android Revolution HD / 4G 5.0 RC1[/B][/COLOR]
- [B]New base 2.36.405.5[/B]
- Fully optimized
- Latest Superuser
- Latest Busybox
- Zipaligned
- Zipalign on boot
- init.d support
- sysrw/sysro
- Cleaned from obsolete files
- All other tweaks / mods incorporated from my 3.x ROMs
- No custom kernel yet but it will come soon!
[COLOR="Blue"][B]Android Revolution HD / 4G 3.7[/B][/COLOR]
- Twitter updated to latest 2.0.2
- Google Maps updated to latest 5.3.1
- Facebook updated to latest 1.5.4
- Adobe Flash Player updated to latest 10.2.157.51
- QuickOffice updated to latest 3.2.178
- Fixed high CPU usage
- Added script that sets InstallLocation to 1 post boot ([I]Thanks to seo[/I])
[COLOR="Blue"][B]Android Revolution HD / 4G 3.6[/B][/COLOR]
- New kernel 1.3.8.4 from Apache14
* Stripped down debug info
* Patched up to 32.39
- Lots of new speed tweaks taken from Pyramid ROM
- Improved memory management
- Google Market updated to latest 2.3.6
- Facebook updated to latest 1.5.3
- Fixed mic low volume
- hosts file updated to latest
- HTC bootanimation from newest HTC Sense 3.0
- Added signatures check hack ([I]Thanks to seo[/I])
- Weather finally fixed
- Please do full wipe if you still got weather issues after flashing 3.6
- [B]Please send me mirrors via private message before posting them here[/B]
[COLOR="Blue"][B]Android Revolution HD / 4G 3.5[/B][/COLOR]
- Re-based on official 1.84.661.1 base
- This build seems to be a bit faster
- Sound quality finally fixed and it's much lauder on headphones now
- Added SD Card Speed tweak
- Google Maps updated to latest 5.3.0
- Busybox updated to latest 1.19.0
- Hindi fonts updated
- Superuser updated to 2.3.6.1 FULLY WORKING VERSION
- Weather fix updated. Please flash it only if you have weather sync issues
- Other minor changes and fixes
[COLOR="Blue"][B]Android Revolution HD / 4G older versions changelog - [/B][/COLOR][URL=http://tinyurl.com/6zmktfs]download[/URL]
[/SIZE]
Take Care
TheQuest
topgun06 said:
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?
Click to expand...
Click to collapse
YES, you only must to flash the new rom _(5.1.2) over the 5.1.1 without wipes.
note: the fullwipe.zip is better for people than flash a lot of times, also you can do full wipe from CWM recovery manually.
Advanced Stock ICS Kernel for Xperia SHere is a kernel based on the Stock ICS kernel with some features which come from DoomLord's GB kernel.
Features
autorooting
CWM recovery (with reboot recovery support)
init.d support (thanks DoomLord)
TUN/TAP driver
Download links
Build 17 (Fastboot)
Build 17 (CWM)
Build 16 (Fastboot)
Build 16 (CWM)
Prerequisites
An unlocked bootloader: Tuto here.
A stock ICS ROM (6.1.A.0.452 to 6.1.A.2.55). Don't expect this kernel to work with CM9/10.
How to flash
For elf files :
Read DoomLord's guide
You just have to replace kernel.elf by the name of the downloaded kernel in the flash command (eg : ics4.elf)
For zip files:
Flash the zip file from the recovery
Changelogs
Build 17 (08/12/12) :
Merge 6.1.A.2.55 kernel sources
Autodetect rom version in default.prop based on build.prop
Updated recovery, adbd and busybox (JB version)
Build 16 (01/11/12) :
Random reboot issue probably fixed (patch from CM10 kernel, thanks Kali)
Rom version increased to 6.1.A.2.50
Updated recovery, adbd and busybox (JB version)
SD card mounted by default in recovery
Vibration at boot removed, only led and backlight now
Build 15 (05/09/12) : Increase ROM version in default.prop from 6.1.A.0.452 to 6.1.A.2.45
Build 14 :
New MMC driver (from codeaurora) : it fixes issue while formatting partitions in CWM
Wifi module built from source (in the ramdisk)
Updated recovery
Disable again hardware clock
Build 13 :
Backup / Restore fixed with dedupe
Backlight enabled in CWM
Better "reboot recovery" handling in adbd / busybox and recovery
Build 12 :
Updated recovery
Hardware clock correctly saved (from CM9 kernel)
Build 11 : Go back to GCC 4.4 (fix artifacts with camera preview)
Build 10 :
Kernel built with GCC 4.6
Several autoroot fixes (Superuser app pushed just once and correctly removed in /data)
Working reboot recovery command (with adb too)
Updated su (3.1.1) and Superuser (3.1.3)
A bunch of new command included in the new busybox (ifconfig, wget, vi, and many more !)
Build 9 :
Kernel built from sources
TUN/TAP driver included (for VPN)
Build 8 : Fix mass storage in CWM
Build 7 : Fix MTP
Build 6 : Key mapping in CWM fixed
Build 5 :
New recovery built from latest CM9 sources
Fixed generation of md5sum with nandroid
Increased font size in CWM
Boot partition backup and restore
New adbd built from CM9 sources (fixed an issue with hardcoded sh path in /system)
Build 4 :
Correct su binary
Don't wait 3 sec if /cache/recovery/boot exists
Build 3 :
Leds and vibrator at startup fixed
Sources
Ramdisk sources
Kernel sources
Credits
DoomLord : many thanks to him for its kernel and all his scripts.
championswimmer and sminki for their help
FreeXperia team for their work on CM
makes it perfectly start does not make any errors
greetings and thanks
yes it boots!
(maybe you can help with my Question here )
Hey, I also have tested several times to include recovery, but withut succes, didn't get any further then a booting kernel without recovery or vibration and LED on to enter recovery but no entering recovery and kernel that doesn't boot.
Please pm me if you want to work together, I saw your kernel is from ICX team? I know nick very well so I'd would be a pleasure to work with you too
sminki said:
yes it boots!
(maybe you can help with my Question here )
Click to expand...
Click to collapse
for this question and any other other question similar to this
head here
http://forum.xda-developers.com/showthread.php?t=1659584
it has menu driven process to extract and repack kernel.elf (ramdisk also can be extracted and packed )
Welcome Champ, good to see you mate.
I will leave the thread here as knowing you, you will have a kernel ready for us in a few hours.:fingers-crossed:
thanks for the test guys... so now i'm diving into including recovery....
good to know i could pull off kernel.elf editing in my first attempt lol
@colossus if not in hours, then definitely within 1 or 2 days
EDIT :
can someone send me the kernel.elf from FXP122 cm9 ??
will save me the time to download the whole ROM
This is sweet, good job!!
john9 said:
This is sweet, good job!!
Click to expand...
Click to collapse
Only a few files to edit now
We'll keep you updated
Sent from my LT26i using XDA
championswimmer said:
btw if anyone wishes to do this before me,
this diffstats should help you
https://github.com/championswimmer/xps-ramdisk/commit/a61969aefca00ce3a6e4e112e97403fb6f0c79e9
it shows how doomlord added recovery to gb kernel..
Click to expand...
Click to collapse
cool.. well that's a hell of a lot easier than the manual route I was taking. This was my goal, but for personal rather than pseudo "xda glory" as I'm working with DooM's stuff I didn't feel right posting it without his permission, but he's probably too busy to care
go for it championswimmer :victory:
Excuse my noob-ish question, but... what's the difference between a 'stock' kernel with recovery and a completely custom kernel like DoomLord's? Is it to do with core frequencies/governors?
fNOOB said:
Excuse my noob-ish question, but... what's the difference between a 'stock' kernel with recovery and a completely custom kernel like DoomLord's? Is it to do with core frequencies/governors?
Click to expand...
Click to collapse
Frequencies and governors are one possible customicing for kernels, for the most users the most important thing. also Kernel modifing can allows you init.d support, undervoltscripts and also allows (or denies) MSC support... and, for shure, clean out some tings, make things more efficiently and and and... a dev is nearly totaly free to create a very customiced kernel with or without special Driver support or so
noob.fl said:
Frequencies and governors are one possible customicing for kernels, for the most users the most important thing. also Kernel modifing can allows you init.d support, undervoltscripts and also allows (or denies) MSC support... and, for shure, clean out some tings, make things more efficiently and and and... a dev is nearly totaly free to create a very customiced kernel with or without special Driver support or so
Click to expand...
Click to collapse
Cheers mate
sminki said:
cool.. well that's a hell of a lot easier than the manual route I was taking. This was my goal, but for personal rather than pseudo "xda glory" as I'm working with DooM's stuff I didn't feel right posting it without his permission, but he's probably too busy to care
go for it championswimmer :victory:
Click to expand...
Click to collapse
using someone's work just because 'he's too busy to care' is not the aim which we at xda strive for ...
i've already talked with Doomlord regarding using his recovery... and as long as I clearly mention it's his work and provide links back to his thread, he has no issues with anyone else using it...
(and i'll surely do that ^^ when i release a kernel containing his recovery, if i ever do that)
championswimmer said:
using someone's work just because 'he's too busy to care' is not the aim which we at xda strive for ...
i've already talked with Doomlord regarding using his recovery... and as long as I clearly mention it's his work and provide links back to his thread, he has no issues with anyone else using it...
(and i'll surely do that ^^ when i release a kernel containing his recovery, if i ever do that)
Click to expand...
Click to collapse
cool, i was only making a bad joke, we all know DooM cares
sminki said:
cool, i was only making a bad joke, we all know DooM cares
Click to expand...
Click to collapse
lol.. ok
and i'll bring you some unicorns soon
championswimmer said:
lol.. ok
and i'll bring you some unicorns soon
Click to expand...
Click to collapse
I can't wait! :victory:
so this kernel has the ro.secure property in default.prop set to 0??
Tnaks mate for your job!
tested right now the test version and the sony logo fades and reboots
can you plug it into a pc and run a logcat from command prompt and give me the output of any comes??