Hi fellow xdaers,
have been a while since i last flash / rooted an android device.
i have a T805Y running KitKat when I bought it from Telstra (Australia). i have then flash the generic Lollipop ROM (T805YDOU1BOG1_T805YXSA1BOG1_T805YDOU1BOG1_HOME) using Odin.
since then, i am having random lose of 4G connection and no way of getting back my mobile connection until a reboot.
does anyone knows if I can load a Telstra modem (perhaps a modem from KitKat using Odin (not rooted). my suspicion is that the gneric Lollipop ROM is not liking Telstra 4G sim card. i have to restart my T805Y every 2 days. disabling mobile network/enable flight mode still does not work for me.
my access point is telstra.wap.
when the 4G connection goes offline, i am not able to make any changes to APN/network mode. when i select network operators, it says 'can't connect'
restart is the only choice for me.
Thank you.
If you find out let me know please. I have the same model and would like to install custom roms but I think our model has the extra 700mhz LTE band needed for Telstra 4GX.
Hello,
I followed this guide to restore my sprint LG G2 to stock Kitkat 4.4.2. Everything went fine, the phone is working, the only problem I have is that I can't connect to any network. The phone is not recognizing any of the local network providers. I bought this phone on ebay and it came with a custom rooted rom installed on it, so I decided to "clean up the mess" and restored stock kitkat. As I mentioned before everything went fine, but the network is not working (it was working with the android version before i restored stock 4.4.2). Maybe its because I'm not living in the USA (I'm from Bosnia/Europe). Should I flash a different radio on it? The phone is updating atm with OTA and I'm pretty sure that the updates wont help. Did anyone else had these issues? Any help would be highly appreciated.
Update: My phone just got upgraded to Lollipop, but the network issue is still present
Update 2: I just reinstalled "cm-12.1-20151031-NIGHTLY-ls980" Lollipop 5.1.1. and it had no problems to find all the networks in my area, so this clearly has to do with stock LG android 4.4.2.
When you say you can't connect to network, are you referring to your mobile carrier network, or like WiFi?
If it's your mobile carrier that you can't connect to, you might need to switch your radio. Take a look at this guide and the section about using radio switcher: http://forum.xda-developers.com/sprint-g2/help/how-sprint-lg-g2-ls980-to-t-mobile-t3230685
Fuzz1303 said:
When you say you can't connect to network, are you referring to your mobile carrier network, or like WiFi?
If it's your mobile carrier that you can't connect to, you might need to switch your radio. Take a look at this guide and the section about using radio switcher: http://forum.xda-developers.com/sprint-g2/help/how-sprint-lg-g2-ls980-to-t-mobile-t3230685
Click to expand...
Click to collapse
Hey there. Sorry for the late response. I kinda gave up on making the stock LG ROM work, which is why I kept on using CM12.1 . What I was referring to was my mobile carrier. The phone has no problems connecting to any WiFi signal.
I didn't try to flash any radios at all after restoring the LG G2 stock ROM. Maybe I should have tried one of the radios from this CM12.1 for LG G2 tutorial. Here is a direct LINK to the full list of LG G2 radios, where I downloaded the radio for my phone. I'm not sure if the other LS980 Radios would work on my device. There are 4 different radios available for the LG G2 LS980.
Do you think flashing one of these radios would help solving this problem after restoring the LG stock ROM?
Just wondering if anyone on here has the knowledge (and the time!) to see if they can get wifi calling for EE in the UK. The Official EE M9 ROM has working wifi, but a zip file that can me modded to other ROMs would be most useful and gratefully received.
Progress, managed to get wifi calling on a non EE HTC m9 using the following RUU:
http://androidruu.com/getdownload.php?file=M9/0PJAIMG_HIMA_UHL_L50_SENSE70_Orange_UK_1.32.61.6_R1_Radio_01.01_U11440261_56.01.50303G_3_F_release_425089_signed.zip
I got it installed using the sd card card method (0PJAIMG.zip) but every time it got to the setup wizard it would reset after about 5 to 10 secs of loading. I couldn't work out why it was bootloop and thought the rom was bad. Turns out that the ROM checks the CID. I was supercid (11111111) however it needs to be ORANG001. Once I'd done that it works great. Than I got the OTA to get to the latest 2.10.61.6 and wifi calling is working great. Need to make sure it's turned on with EE too by speaking with customer services.
Looking for someone who knows about ROMs and how they are built so we can try and get the required bits out to allow custom ROMs to be modded. Anyone out there who can help? I'm out of my depth, but looking to get better at all of this!
Hi there, new to the forum but seen this message a week or so ago and also want to activate WiFi calling on my non-EE One M9. I downloaded the above RUU but can't extract it for some reason, is it the size that's causing an issue?
Hi guys,
I got my HTC 10 last week - phone is a big improvement from the m8.
I am running Telstra's latest firmware - Have s-off already...
Telstra's latest firmware is 1.53.841.6 with Leedroid ROM - have been trying to get VOLTE.
I never got VOLTE with stock because I rooted so fast and S-OFF and installed custom ROMs.
So I had to install stock system image 1.53.841.6, reinstall stock recovery and factory reset and VOLTE icon shows up instantly. Install TWRP and VOLTE remains. But if you install a custom rom and do a full wipe seem to lose VOLTE. Also have to have the telstra firmware to VOLTE to work, I tried with WWE and no go. Also had to ring up telstra as it wasn't activated. So if you are having trouble getting it - might be best to double check. Even though my provisioned flag was on. *#*#4636#*#* to check - tap phone info.
@xlrate reported not wiping data and installing VIPER was able to keep VOLTE. (Updated the customize folder in the rom with my Telstra back up, also the build prop to do this) Also TELST001 cid has to be on.
Has anyone got VOLTE working on a custom ROM on WWE Firmware?
So Aussies... Who's got their new HTC 10?
Update - 15/10/16
Thanks to @brantp for providing TWRP backups & OTAs
https://drive.google.com/drive/folders/0B6MWrHVBWC-xZlBQN1BqYUNPRW8
TWRP Backup (untouched System Image + Boot)
- 1.21.841.8 (+ Recovery)
- 1.53.841.6
- 1.80.841.1
- 1.95.841.3
Stock Recovery
- 1.53.841.6
- 1.80.841.1
- 1.95.841.3
OTA
1.21.841.8 --> 1.53.841.6
1.53.841.6 --> 1.80.841.1
1.80.841.1 --> 1.95.841.3
Firmwares- Refer to http://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520 for more info
https://docs.google.com/spreadsheets/d/1EdAHLDDxqf9jH65me_8bY9oXdaYusI0eedpwO6yUY2s/pubhtml
Thanks to @Sneakyghost
Roms- Leedroid, ICE and Viper now support Telstra with carrier support.
If anyone has any of the other australian carriers firmware please post and I will add them to OP.
15/08/16
https://www.androidfilehost.com/?w=files&flid=60869
Telstra RUU provided by @Sneakyghost - Will restore OTA's if anyone has broken them
12/03/18
Telstra OREO update
http://fotadl-az.htc.com/secure/OTA....48.841.31_release_519847tp9bagwfkglchg5u.zip
@Sneakyghost isn't doing the firmware updates anymore.
If you need to use the firmware.zip out of the OREO zip and need to a custom recovery either replace the recovery.img with twrp.img (rename it of course) in the firmware.zip - or flash one after installation.
I got mine about a month ago.. All I've done so far is root it.. (even after all these years, it still sounds wrong)
I normally run ARHD, but, Mike hasn't mentioned developing for the 10, so, I'm stuck atm, not really interested in running a massively modded ROM. But, last night the OTA notification popped up for 1.53.841.6.. So, I'm going to have to do something - the notification is annoying me. So, I guess I have to work out how to update it.
I hadn't even considered the VoLTE requirements.. I just assumed it would all work, even on a custom ROM. 4G did, I didn't think this would be any different.
Is VoLTE worth hanging on to? I don't really get it.. Is it like VOIP for mobiles?
Vampyric said:
I got mine about a month ago.. All I've done so far is root it.. (even after all these years, it still sounds wrong)
I normally run ARHD, but, Mike hasn't mentioned developing for the 10, so, I'm stuck atm, not really interested in running a massively modded ROM. But, last night the OTA notification popped up for 1.53.841.6.. So, I'm going to have to do something - the notification is annoying me. So, I guess I have to work out how to update it.
I hadn't even considered the VoLTE requirements.. I just assumed it would all work, even on a custom ROM. 4G did, I didn't think this would be any different.
Is VoLTE worth hanging on to? I don't really get it.. Is it like VOIP for mobiles?
Click to expand...
Click to collapse
I have had VoLTE working with Leedroid after I used the telstra 1.53 system/customize & parts of the build.prop on the 1.30 base... Haven't been able to get it working on 1.80 base.
Have had to use the telstra firmware for it work, doesn't work on WWE. So it is kinda a pain to get working.
VoLTE is better call quality and if you are on a call you can use LTE/4g to use the internet... Without VoLTE when on calls your phone 3g
EDIT - don't think OTA will work since you are rooted unless you went systemless root
I guess I don't 'appreciate' VoLTE as much as I should, because I rarely make phone calls..
Sadly, not Systemless root. So, I think I need to go back to stock, update and re-root. It's not something I've had to worry about before. So, it's kinda frustrating, and a little too complicated for me to totally understand.
I was going to de-brand it, and just run the WWE RUU.. But, maybe I'll wait for the 1.80 Telstra update and worry about it then.
I got rid of the notification
**Sent from a uranium powered typewriter**
Anyone experiencing an issue with NFC? While on stock 1.21.841.8 (and locked), worked without issue. Since updating to 1.53.841.6 (and unlocked), can't read my Opal card now ie no vibration, no sound, no anything. Haven't tested my tap & pay banking app yet (which did work without issue prior to updating).
Yes I also had and issue with NFC. Would not read opal card and was an absolute pain to try and read my Amex and Visa card.
Ended up getting another issue with it and returned the phone under warranty for NFC and the other issue.
Still waiting to get a phone back ?
Sent from my HTC One_M8 using Tapatalk
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
pablo11 said:
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
Click to expand...
Click to collapse
Thats if we get 1.8
I have a feeling we will miss that and get the one after that.
xlrate said:
Thats if we get 1.8
I have a feeling we will miss that and get the one after that.
Click to expand...
Click to collapse
Aparently they have stoped rolling the 1.80 update. Im on vodafone and there website has no update for the htc 10 so i agree that we wont get it
yldlj said:
Aparently they have stoped rolling the 1.80 update. Im on vodafone and there website has no update for the htc 10 so i agree that we wont get it
Click to expand...
Click to collapse
Tried reflashing the 1.53 firmware again (twice) to see if it fixes it, but it's still not working ie Can switch it on and off, but it does not respond to my opal card.
It's only taken Telstra until this month to push out 1.53, so who knows when (or if) 1.80 will happen. Now I'm trying to decide whether it's worth sending back for another handset or waiting to see if the next OTA will fix it. My biggest concern is that the replacement could be on 1.21 and I could possibly end up with the same issue all over again!
pablo11 said:
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
Click to expand...
Click to collapse
I just tried to NFC on 1.53 and it isn't working very well, hardly at all. I got it to work 3 times in about 15 mins...
Previously I think when I was on 1.30 firmware it was working well before but just had to hold it near the head phone jack.
Any Telstra users want to test out the Telstra firmwares
http://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520
Make sure you back-up the rom & back up internal storage refer to later posts in that thread.
https://crowdsupport.telstra.com.au/t5/Device-Updates/Software-Updates-01-07-2016/td-p/585953 Telstra 1.80.841.8 firmware is coming 25-Jul
Leedroid is the best rom for Telstra users. Running it myself and working perfectly, now supports Telstra with carrier support & VoLTE working - thanks @LeeDroid
*Only works on Telstra firmware.
Install Ice yesterday (only got my phone Friday ), really like it over the stock rom.
Some people complained about the LED but I like it. My only complaint about my M8 was how bright the LED was specially in the dark when you're trying to get to sleep.
Another problem I'm having is file transfers freeze when using a USB 2 port on Windows 10.
I like my new M10 but not sure if I like it over the M8 as of yet. I preferred the speaker arrangement on the M8 and having the home, back buttons etc on the screen rather then down the bottom.
I have to admit I'm not a fan of the "Samsung" look at all which is why I bought HTC in the past to begin with. I didn't want to be a part of the flock.
Hey guys,
I'm looking to get the 10 but imported, could someone (especially looking for someone with Optus) check their box to see what specific model it is (e.g. 10h or 10u)?
Thanks guys
The Telstra model is a HTC 10h
ICE (InsertCoin) v2.0.6 supports Telstra also now too. Thanks @baadnewz
morgy59 said:
The Telstra model is a HTC 10h
Click to expand...
Click to collapse
Awesome, thanks morgy59
Found out that Telstra's policy for DOA/ELF replacements are within 30 days of purchase. Since a return will result in a repair, I'll wait to see if the OTA will fix the NFC issue first before sending back.
Has anyone experienced an NFC issue on Telstra stock, only to have it disappear after switching to a cusom ROM?
brantp said:
Found out that Telstra's policy for DOA/ELF replacements are within 30 days of purchase. Since a return will result in a repair, I'll wait to see if the OTA will fix the NFC issue first before sending back.
Has anyone experienced an NFC issue on Telstra stock, only to have it disappear after switching to a cusom ROM?
Click to expand...
Click to collapse
I found it worked perfectly fine on wwe 1.30 firmware using Leedroid. Now I'm on 1.53, hardly works at all
Sent from my SM-P605 using Tapatalk
It's doesn't read card on 1.53 on Optus build 710
Hello. I hope you can help me resolve some issues...
I have the samsung sgh-i747m version. I originally had it rooted on stock 4.4.2 and working with a knowroaming sim. The knowroaming sim would either connect to Rogers, Telus or Bell depending on the signal strength. Mainly Bell in my case. Anyways, I use the sim for whatsapp and it was giving me issues. Namely, notifications would stop working after the phone sits for a while. I read that it might be a problem with 4.4.2 so I decided to update it to 6.0.1. Reason I chose 6.0.1 is because the guide uses the same recovery as I do (CWM) and I'm guessing that since most development has moved on to 7.1, 6.0.1 should be stable?
Anyway, I flashed the ROM and everything seems to work fine except my knowroaming sim no longer works. In other words, it doesn't connect to any network Rogers, Telus, or Bell. For some reason, when I go search for networks, it always says no networks found. So I popped in my Telus sim from my other phone and it connected to the network fine but again, searching for networks shows no networks. I think knowroaming doesn't connect because it can't find any networks either. So I spent some hours looking to see what the problem is and some of the jargon is starting to confuse me and making me hate Samsung for the things they do.
I managed to download an app called Phone Info *Samsung* and I will list the information here and maybe you can tell me what is going on:
If you have any suggestions on what I should do to get the network providers showing up, then I'm all ears. If updating to a 7.1.2 rom will fix this issue, I'll gladly do it.
Thanks.
Nobody?
Replace Cwm with twrp and try a different custom ROM?
I tried the octa-m rom 7.1.2 and still the same thing. I'm going to go back to stock and try again.