Does the Galaxy S Download Mode Dongle Mod work on Omnia 7??
---------------------------------------------------------------
Anyone tried this yet? As they are both Samsung devices it has got to be worth a shot!
Please, Please somebody try this and post the results.
Solved!
It has now been confirmed that the Resistor Jig used to bump the Galaxy S into download mode also works on the Omnia 7!
Thanks to Daleski75 for being brave enough to try this!
Click the link below to take you straight to the Galaxy S thread:
http://forum.xda-developers.com/showthread.php?t=819551
It works exactly the same way on our Omnia 7 as it does on the Galaxy S.
Now we can enter Download Mode without having to use the 3 Button Combo!
Once a new firmware is flashed the bootloader will also be overwritten which will also re-enable the 3 Button Combo.
lyriquidperfection said:
It has now been confirmed that the Resistor Jig used to bump the Galaxy S into download mode also works on the Omnia 7!
Thanks to Daleski75 for being brave enough to try this!
Click the link below to take you straight to the Galaxy S thread:
http://forum.xda-developers.com/showthread.php?t=819551
It works exactly the same way on our Omnia 7 as it does on the Galaxy S.
Now we can enter Download Mode without having to use the 3 Button Combo!
Once a new firmware is flashed the bootloader will also be overwritten which will also re-enable the 3 Button Combo.
Click to expand...
Click to collapse
If I understand what you're saying. We first plug the jtag, the omnia enters download mode, then ? unplug the jtag and plug in the normal usb cable and flash the rom with a new bootloader ? correct ?
(sorry for my poor technical english )
calarfe said:
If I understand what you're saying. We first plug the jtag, the omnia enters download mode, then ? unplug the jtag and plug in the normal usb cable and flash the rom with a new bootloader ? correct ?
(sorry for my poor technical english )
Click to expand...
Click to collapse
Yes that is correct! The phone must be switched OFF when you plug the jig in though.
I would like to offer up a free USB jig to someone with a Omnia 7 that is willing to send me a close up of the phone in download mode using my USB jig.
Here is my jig in a how to video. Please be willing to email me a clear picture once you receive the jig. http://www.youtube.com/watch?v=2KXBYyf2e28
PM me if you are interested.
Thanks.
Mark
cameronbailey said:
If anyone could lend me one to use so i can update my firmware that would be fantastic!!
Click to expand...
Click to collapse
It's quite easy to make one yourself. I wrote some instructions here (also link to a clear picture). If you can't make it yourself you'll probably know some friend or family who is able to solder this. Components cost only a few Euro's.
If you want to update with USB-JIG I created this simple guide.[/B]
USB-JIG for Samsung OMNIA 7 - Correct instructions! Quick and very SIMPLE guide !
KraFT_mk said:
Made this 300k serial resistor USB jig.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Resistors are isolated very good.)
(Goodbye - battery out - in )
Played for more than 3 hours and resistors will invoke:
1. Normal reboot or
2 This display msg.
IMG HERE
Anyone can explain?
Click to expand...
Click to collapse
how are you possibly ensuring that you only make contact with the #4 and #5 pin on the micro-usb port on your phone? Also, the instructions say you must use 301K resistor, or a series of resistors that "add" up to 301K, you rig is only 300K
300K is close enough for it to work (most resistors are already up to +/- 5% off anyway).
My Omnia 7 always got stuck when trying to enter download mode. Got 3 100K resistors at radioshack, sticked them together, and minutes later my phone was in download mode and I could oad 7392 on it. Everything has worked great ever since (it also stopped getting stuck on startup screen when battery was completely flat)
Related
I am sure there are a lot of you who have unknowingly updated to SPL 5.xxx only to get to Internet Sharing or by mistake and are stuck on SPL 5.xxx like me. After a lot of reading, researching and wanting to go to custom roms like Ansar’s or DFT’s Freedom Rom, I have managed to go back to SPL 1.22 from SPL 5.xx .I have come up with this step by step guide for the downgrade. So this is how it works.
First of all what I did was to find an old USB HUB
Find an old USB Extension Cable(I hope this is what it is called). i.e. It has a male port on one end and a female port on another end.
I de-soldered two female usb ports from the old usb hub
Soldered both the usb ports like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cut the old usb cable and only soldered the red (+positive) and black(-negative) wires to the ports.
Took a USB Drive and formatted it to FAT 32
Copied the RUU_Signed.nbh from the rom RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3a_22.36.50.15U_by_ansar and renamed it to GOLDIMG.NBH
*** I am not sure if this step is necessary but I had done this step so may not work without it. Opened the goldcard tool v0.05(an old version I had) and patched a goldcard.img which I had from my old HTC Wildfire and patched the USB Drive. Note I did not get the CID of the USB drive or used a memory card and card reader
Connected the male port of the USB cable made earlier to the PC, Inserted the USB Drive to one port
Put the Phone (HTC 7 Pro) to the USB host mode by holding the Volume – and Camera button together.
Connected the phones USB Cable to the other USB Port.
I suddenly got the screen on the phone and it started updating the phone from the USB Drive, the Phone booted once and it updated once again
Then the Phone’s screen showed the update was a success. I had to hold the power for about 10 secs and the phone powered off. I switched on the phone and hold the volume – to get to the boot loader and what I saw was SPL 1.22. Will be uploading the pictures soon as I don’t have my camera with me now.
I am off to Flashing custom roms now………..Good luck everyone and hope this tutorial helps you all to go back to custom roms and unlocked WP7 phones. Cheers………….
I you have any questions feel free to PM me.
Note: Please try this at your own risk. I will not be responsible for bricked devices.
A big thanks to Martin7Pro for his research and contribution.
Please hit thanks if my post helped you.
Nice but, can you give any scheme ? THX I don't understand that:
I de-soldered two female usb ports from the old usb hub
Soldered both the usb ports like this.
Click to expand...
Click to collapse
UPD
3 Dec
Working good. I made video-tutorial with that:
Refered to this link: http://forum.xda-developers.com/showthread.php?t=893152
Thanks to ceesheim
Thanks, can you please share your "goldcard.img"
Steel said:
Thanks, can you please share your "goldcard.img"
Click to expand...
Click to collapse
Here you go...
Thanks a lot, i will try.
is the goldcard for all wp7 phones or specific phone only.
I tried this to my updated HTC HD7 7740 but it keeps rebooting. After the "Loading.." reboot, "Loading.." reboot and so on.
My usb cable has green, red, white, yellow.
So which colour is for data , power
Steel said:
My usb cable has green, red, white, yellow.
So which colour is for data , power
Click to expand...
Click to collapse
Cheers!
Thanks zyxer, but i don not have black wire. Do you mean my yellow wire is power (-)
Thanks Zyxer, but i do not have black wire. Do you mean my yellow wire is power (-)
Ok working good. I made video-tutorial with that:
Not work for me.
HD7 T-mous, 7720.68 SPL5.10
Hmm I don't know why ? I did it on HTC 7 Pro and that's work.
Steel said:
Not work for me.
HD7 T-mous, 7720.68 SPL5.10
Click to expand...
Click to collapse
Make sure that you have the original ROM with the lower SPL.
Kr3i0s said:
Make sure that you have the original ROM with the lower SPL.
Click to expand...
Click to collapse
I used this rom : RUU_Schubert_TMOUS_3.01.531.02_Radio_5.65.09.25a_22.45.50.21_Signed_SCHUBERT_RELEASE.7392
bootloader from 5.10 to 4.6 with "Goldcard"
Hi, I'm just on my HTC Mozart (including all updates, IS, bootloader 5.10 / 7.10.7740.16)
successfully with the "Goldcard" way downgraded the bootloader from 5.10 to 4.6.
See pictures.
Is really simple, if now how.
I've done everything as described in the first tread.
I've only after the bootloader downgrade the USB cable on Mozart moved in order not to downgrade also radio update.
I thank the treadmaker and all other ones to able and manage this.
All this ones without to loose any SMS, mail or contact. Even the unlock (Chevron or Interop) is again working.
Till now I have no problems with the Mozart.
Steel said:
I used this rom : RUU_Schubert_TMOUS_3.01.531.02_Radio_5.65.09.25a_22.45.50.21_Signed_SCHUBERT_RELEASE.7392
Click to expand...
Click to collapse
Thanks all brothers, finally I came back NoDo.
My problem was Y-cable. I made a new Y-cable then it worked.
I stucked at "Loading..." after the text of "Enter USB Host Mode.."
I tried 8GB microSD, 4GB and 512MB but no lucks at all.
I tried the ROMs:
-1.54.728.01 (Asia SEA) = NO LUCK
-1.23.707.01 (Asia WWE) = NO LUCK
-1.57.707.02 (Asia WWE) = NO LUCK and
-4.05.728.01 (Asia SEA) = NO LUCK.
Ok so i bought the 400k model and then really wanted the international version so bought that too to then sell my 400k.
My 400k was rooted so I wanted to load the new software on using flash tool. So last night for 4 hours I tried and it won't. But my problem now is that I cannot get rid of this screen below. I have tried:
-battery pull - doesn't work and just comes back to screen
-any combination of buttons e.g. long press power button plus volume disc or long press power button only. None of them work.
-Drain the battery completely. Doesn't work back to that screen.
What can i do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
poczynek said:
Ok so i bought the 400k model and then really wanted the international version so bought that too to then sell my 400k.
My 400k was rooted so I wanted to load the new software on using flash tool. So last night for 4 hours I tried and it won't. But my problem now is that I cannot get rid of this screen below. I have tried:
-battery pull - doesn't work and just comes back to screen
-any combination of buttons e.g. long press power button plus volume disc or long press power button only. None of them work.
-Drain the battery completely. Doesn't work back to that screen.
What can i do?
Click to expand...
Click to collapse
download the lg pc suite and use the repair option or try running flashtool again
whatever you do first install this to your computer
https://www.google.be/url?sa=t&rct=...ar9ozcfB_V4Xrxq3XGAVrbQ&bvm=bv.70138588,d.ZWU
Sent from my LG-D855 using XDA Free mobile app
suljo94 said:
download the lg pc suite and use the repair option or try running flashtool again
whatever you do first install this to your computer
https://www.google.be/url?sa=t&rct=...ar9ozcfB_V4Xrxq3XGAVrbQ&bvm=bv.70138588,d.ZWU
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Yes i tried downloading the LG Pc Suite last night but it wouldn't recognise my phone - it didn't come up as one i could choose. Is there a special version of it for the Korean model?
poczynek said:
Yes i tried downloading the LG Pc Suite last night but it wouldn't recognise my phone - it didn't come up as one i could choose. Is there a special version of it for the Korean model?
Click to expand...
Click to collapse
Did you try to follow this thread? When you plugged your USB cable in to your device did you change the Port to 41? Then follow all the instructions to restore your "K"?
KachowPow said:
Did you try to follow this thread? When you plugged your USB cable in to your device did you change the Port to 41? Then follow all the instructions to restore your "K"?
Click to expand...
Click to collapse
Yeah those are the instructions i followed last night. I must have tried it 20 times! Port was changed and it just hung on 6% for 20 minutes. Then each other time it would sometimes try for a percentage and sometimes not work at all. So then i thought i will just factory reset but now it just won't move from that screen no matter what i do.
poczynek said:
Yeah those are the instructions i followed last night. I must have tried it 20 times! Port was changed and it just hung on 6% for 20 minutes. Then each other time it would sometimes try for a percentage and sometimes not work at all. So then i thought i will just factory reset but now it just won't move from that screen no matter what i do.
Click to expand...
Click to collapse
Try a different TOT and DLL file, see if you can get your device restored on either an S/L. I had a similar situation a few days ago...
Hello
I own this device :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I recently tried to update this device with the latest MALAY MOD rom.
The problem was that I didn't had the option to remove all data while updating. Thus resulting in an corrupt install.
I need to get into recovery mode now to install the rom from there, however I do not know how to enter recovery. I've tried all the possible ways that I could find without result.
The touchscreen buttons don't seem to give input to the device, except the power(like) button, if I press this button the screen goes black bit the machine keeps running. Pushing again makes the screen go on again. (this does not restart the device)
The reset button immediately shuts off the device, while holding it the unit stays off. When released the device starts up and gets stuck on boot logo.
I tried contacting the supplier, now 5 days later and still no reaction..
Does anyone have an idea?
try:
press and hold in power button, press rst briefly, let go of power more than 3 seconds after pressing rst
Hi,
I have the same car unit. I have not upgraded, but it does not run. Just booting. I don't know how to restore the factory settings. I can't reset.
Somebody knows? Please help me!
Thanks!
lincoln_dj said:
try:
press and hold in power button, press rst briefly, let go of power more than 3 seconds after pressing rst
Click to expand...
Click to collapse
Thanks for the reply, I just tried this but had no success
The "power button" doesn't do anything if I keep my finger on it (touch buttons).
honvedz said:
Hi,
I have the same car unit. I have not upgraded, but it does not run. Just booting. I don't know how to restore the factory settings. I can't reset.
Somebody knows? Please help me!
Thanks!
Click to expand...
Click to collapse
Did you try to contact your supplier?? He should be able to help.
Hi,
My sellers reply to me!
I can't insert download url.
If you are interested in the solution, send an email!
Thanks to @honvedz for this way to get into recovery mode !
honvedz said:
Hi,
My supplier reply to me.
http://speedy.sh/Akda7/AndroidCarHea...date-steps.doc
password: detidovepefi
Good luck!
Click to expand...
Click to collapse
i tested this and i actually get into recovery mode
This for Apple or android
أرسلت بواسطة iPad بإستخدام Tapatalk
Criticalpain26 said:
Thanks to @honvedz for this way to get into recovery mode !
i tested this and i actually get into recovery mode
Click to expand...
Click to collapse
Hello,
Same problem here but your link doesn't work anymore ...
Slts.
Steve-Austin said:
Hello,
Same problem here but your link doesn't work anymore ...
Slts.
Click to expand...
Click to collapse
Well luckily I saved a copy on my drive
I attached it and here is a link for online viewing :
http://www.docspal.com/viewer?id=dbaemqbp-12570265
Cheers!:good:
Criticalpain26 said:
Well luckily I saved a copy on my drive
I attached it and here is a link for online viewing :
http://www.docspal.com/viewer?id=dbaemqbp-12570265
Cheers!:good:
Click to expand...
Click to collapse
Thank-you for the link. Sadly, the trick doesn't work with my unit.
Steve-Austin said:
Thank-you for the link. Sadly, the trick doesn't work with my unit.
Click to expand...
Click to collapse
You need to unbrick the device with SD firmware tool :
https://forum.xda-developers.com/showpost.php?p=68717214&postcount=877
typos1 said:
You need to unbrick the device with SD firmware tool :
https://forum.xda-developers.com/showpost.php?p=68717214&postcount=877
Click to expand...
Click to collapse
Thanks but I already tried with sd, but it didn't work
Steve-Austin said:
Thanks but I already tried with sd, but it didn't work
Click to expand...
Click to collapse
Oh, not sure about that them have you tried to connect with adb ?
typos1 said:
Oh, not sure about that them have you tried to connect with adb ?
Click to expand...
Click to collapse
There is no usb port in front
Steve-Austin said:
There is no usb port in front
Click to expand...
Click to collapse
You can use ADB wifi or solder a usb port, there are instructions somewhere in the original thread.
You could ask in this thread :
https://forum.xda-developers.com/an...k-bootloop-t3635412/post73459256#post73459256
its for MTCD units but they are related, maybe some one could help you there ?
Hello
I'm new in this forum and I'm not advanced user in this kind of things at all so please, treat me like a non-geek user.
I want to tell you my story.
I bought my Samsung Galaxy Watch SM-R810 few months ago and I've been trying to install my Samsung Pay a lot of times. I've been reading a lot about this and I suppose that my device is from another country that is not allow to use it (?).
So Reading a lot in this forum (and more) I decided to change the region to another that allows me to use my damnit NFC to pay my things.
I've been trying it by the easiest way using adb commands wireless like in the post bellow:
https://forum.xda-developers.com/sm...nging-region-samsung-gear-sport-r600-t3771324
But everytime I tried it fails and I deduce that my current version is too higher and mine is locked to change the region to another so..
I decide to downgrade my current version to another bellow 4.0.0.4 that allows to do this...
Using NetOdin3 I've intalled this version but by error I charged R800XX instead R8100XX that I need so I'm stucked in the following screen (I supose that is bricked) And I pray to any of you can help me with this because I'm overwhelmed at this point and my last joker is to use the internal pins of my device to try to connect it to my computer...
ODIN MODE
PRODUCT NAME: SM-R810
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: ON
Secure Download : Enabled
CARRIER_ID:
WARRANTY VOID: 0 (0X0000)
AP SWREV: B:0 K:0 S:0
Secure JTAG Disabled!!!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry, no other way:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
You need USB cable.
Then please only flash correct Firmware SM-R810
Best Regards
adfree said:
Sorry, no other way:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
You need USB cable.
Then please only flash correct Firmware SM-R810
Best Regards
Click to expand...
Click to collapse
HEEEY, I did it! It works perfect now!
I used this tutorial to unbrick it (I had to buy 2 chargers because first one came without 5 pins, but S3 Gears works perfectly, If you are reading this please buy one because I'm seeing that it's becoming difficult to get it now)
And once I unbrick it (I had to try a lot of time because pins didn't connect at all, also I had to cut some plastic of the 5 pins charger motherboard to fit it better) I decide to try again and install the propper version to change my region (that was my very first problem).
So I used this version R600XXU1AQI8_OXA That is Tizen 4.0.0.4 Using NetOdin (Once is totally unbricked and allows Download (Wifi))
And Finaly I used this tutorial to change my region, I used before but with newers version of tizen it's not possible.
https://forum.xda-developers.com/sm...nging-region-samsung-gear-sport-r600-t3771324
Finally I have my Samsung Galaxy Watch SM-R810 with Samsung Pay, It can be very risky only for getting this app but I think Is stupid expend this bunch of money in this watch and cannot use one of the most important uses that is NFC to pay (more when the only reason is the freacking region)
So If you are reading this in the future and Have the same problem than me you can ask here in this post how to fix it.
I'm very pleased with XDA-Developers forum because you saved my life, Thanks!
Hello, i had the same problem when i was trying to downgrade to change the region so i can download samsung pay.
Im trying to do exactly what he tells to do on the video, but my computer is not recognizing the watch as in the video. So the Netodin is not connecting to the watch. I thought perhaps it whas not fit firmly, but i can hear the noise on pc that an usb device was connected. I dont know more i can do. Can someone help me ? (Sorry about my english, im from Brazil)
One more thing, where i can find the original and correct room for sm-R810 ? Thanks a lot!!!
Hi. I am Carlos from the philippines. I am a Xiaomi Mi 10T 5G user, and I have some issues with my unit regarding the usb debugging and my external USB suddenly it is not functioning on my phone anymore, and, even the tethering on my phone cannot also be selected for it to work. But, I can still charge my phone using my pc or charging brick, and even use the usb port for my headset. (with headset adaptor for usb type-c)
There is no problem with my pc or even my external usb, cause I have tried them on my wife's phone and the external usb and my pc can detect her phone. What could be the problem? Can anybody help me with this? Tia
I am also facing the same problem. Xiaomi Mi 10T Pro user here. OTG and USB options stopped working all of a sudden. I have created a thread here regarding the same. Some users in xiaomi europe forum have also reported the same issue. Looks like this is a hardware issue triggered by some specific setting. So far no solution.
Actually, I ordered a cheap priced charging port for Mi 10T from Shopee. It is not a original Xiaomi product but an OEM I suppose. It has not arrived yet, but, as soon as I receive it, I will go to a technician and have my stock charging port replaced. Maybe around less than month from now I will get back here and post the result. Cause, this is the last resort in finding solution to this issue...
4 days ago I had the same problem as you, I found a way to solve this error.
First you go to Settings, select All parameters, select Android version, if it is android 11, then you push the volume of android 11 up and down 3 times until it shows number 11, then plug the phone into the computer to see if it shows usb for file transfer.
KentPC said:
4 days ago I had the same problem as you, I found a way to solve this error.
First you go to Settings, select All parameters, select Android version, if it is android 11, then you push the volume of android 11 up and down 3 times until it shows number 11, now you try to connect the phone to calculator and see the results.
Click to expand...
Click to collapse
Sorry, I can't understand much about the last part, "try to connect the phone to calculator?" How should I do this?
carlospbcastro said:
Sorry, I can't understand much about the last part, "try to connect the phone to calculator?" How should I do this?
Click to expand...
Click to collapse
sorry i mistyped
You have done all the above steps, then plug the phone into the computer to see if it shows usb for file transfer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before
After
KentPC said:
sorry i mistyped
You have done all the above steps, then plug the phone into the computer to see if it shows usb for file transfer.
Click to expand...
Click to collapse
Tnx for the reply.. I will try this out first.
KentPC said:
sorry i mistyped
You have done all the above steps, then plug the phone into the computer to see if it shows usb for file transfer.
Click to expand...
Click to collapse
Tried it. Unfortunately, nothing happened.
carlospbcastro said:
Sorry, I can't understand much about the last part, "try to connect the phone to calculator?" How should I do this?
Click to expand...
Click to collapse
I already did try this many times, but, it is just creating a bug report..
same prob sakin. was it fixed nung pinalitan charging board??
Up! I'm having same issue and I don't know why. If someone find anything please let me know