Related
Hi Guys,
After alot of searching on here I was still unable to find my answer.
Im currently using XBMOD's ROM (thanks man its tops) I dont want to change from it. But the problem I am having is here in Australia im with Telstra and it uses 850mhz for its 3.5 NextG network.
I have noticed that with majority of the roms on here this is enabled or even supported. I know my phone has it because when i load it up with Telstras ROM everything works like Foxtel and and what not.
Is there someone out there that can help me get this up and running.
Then we could start mixing it in with the roms here.
thanks
is your phone the European Version?
yeah im pretty sure it is.
I'm using a Telstra diamond, and im running the official Asia 2.03 rom, and it works fine...the network drop down box doesn't show UMTS 850MHz, but it is picked up as far as i know...(i've travelled to a nextG only town and had signal - even without the patch attached installed)...also all the quad band radios support 850MHz, you can enable it in the drop down list using this patch if you want:
i installed it, but where do you enable it? which drop down list?
It's not software that allows us with Telstra Diamonds to connect to the other frequencies but hardware.
Our Telstra Diamond's are DIAM130's. They have extra hardware to enable the use of our 3G frequencies.
well i know i have the hardware cause when i am using the telstra stock rom i can do what i want to do.. so its more of a software side where i have to activate that piece of hardware
luckyluke1137 said:
well i know i have the hardware cause when i am using the telstra stock rom i can do what i want to do.. so its more of a software side where i have to activate that piece of hardware
Click to expand...
Click to collapse
Just because you can access the Telstra features doesn't necessarily mean you're on the 850Mhz band (trust me, I learned the hard way)... you could be connecting through their 2100 Mhz network (I think it's 2100). Even if you have the option of selecting 850 Mhz in the phone settings it doesn't mean you have the hardware for it.
Want a definitive check? Try restricting the phone to the 850 Mhz setting and seeing if you can still connect. Otherwise, pull the back cover off, pull the battery away from body and read the model number below the bluetooth icon (assuming they all have this)... if it's a DIAM100 then definitely no go. If it's a DIAM130 then you're laughing and I'm not to sure on any other model no's though.
I've flashed a myriad of ROM's from here on the DIAM130 and have never had an issue with connecting to the NextG network... they have all connected straight after reboot. The only thing you have to do for internet access is ensure you set the HTTP proxy to 10.1.1.181:80 although it has worked fine for me without this.
luckyluke1137 said:
i installed it, but where do you enable it? which drop down list?
Click to expand...
Click to collapse
Click phone, go to Menu, then go Options, go Band... the settings are in there...
Windza said:
Just because you can access the Telstra features doesn't necessarily mean you're on the 850Mhz band (trust me, I learned the hard way)... you could be connecting through their 2100 Mhz network (I think it's 2100). Even if you have the option of selecting 850 Mhz in the phone settings it doesn't mean you have the hardware for it....
Click to expand...
Click to collapse
I live in rural NSW, there is only the nextG 850MHz network here, or GSM...where i checked the signal was a nextG only region...no GSM coverage at all...so i think that's proof enough don't you?
lasterato said:
I live in rural NSW, there is only the nextG 850MHz network here, or GSM...where i checked the signal was a nextG only region...no GSM coverage at all...so i think that's proof enough don't you?
Click to expand...
Click to collapse
Certainly is - but you have a Telstra Diamond and my comment was directed at luckyluke... or did I miss something ?
radio .08
works perfect for me.
Windza said:
Just because you can access the Telstra features doesn't necessarily mean you're on the 850Mhz band (trust me, I learned the hard way)... you could be connecting through their 2100 Mhz network (I think it's 2100). Even if you have the option of selecting 850 Mhz in the phone settings it doesn't mean you have the hardware for it.
Want a definitive check? Try restricting the phone to the 850 Mhz setting and seeing if you can still connect. Otherwise, pull the back cover off, pull the battery away from body and read the model number below the bluetooth icon (assuming they all have this)... if it's a DIAM100 then definitely no go. If it's a DIAM130 then you're laughing and I'm not to sure on any other model no's though.
I've flashed a myriad of ROM's from here on the DIAM130 and have never had an issue with connecting to the NextG network... they have all connected straight after reboot. The only thing you have to do for internet access is ensure you set the HTTP proxy to 10.1.1.181:80 although it has worked fine for me without this.
Click to expand...
Click to collapse
Agree, rip the back off and do this check first, I've found no issues in using any rom's with my DIAM130. I've left band settings to Auto lately.
I use to go in and change the registry to show all bands, but got sick of doing it everytime a rom cooker "missed" our bands.
The cab from Dutty does work I think by my memory ?
I did have a DIAM100 proir, and yes it will show "Telstra" etc but you will NOT get NextG 850.
cheers
luckyluke1137 said:
Hi Guys,
After alot of searching on here I was still unable to find my answer.
Im currently using XBMOD's ROM (thanks man its tops) I dont want to change from it. But the problem I am having is here in Australia im with Telstra and it uses 850mhz for its 3.5 NextG network.
I have noticed that with majority of the roms on here this is enabled or even supported. I know my phone has it because when i load it up with Telstras ROM everything works like Foxtel and and what not.
Is there someone out there that can help me get this up and running.
Then we could start mixing it in with the roms here.
thanks
Click to expand...
Click to collapse
HI
try to change registry key
HKEY_LOCAL_MACHINE\Software\HTC\AdvancedNetwork\SupportHSUPA
from 0 to 1
My device is DIAM100 and upgrade to "hTC_Asia_WWE_2.03.707.2_Radio_Signed_D iamond_52.51.25.26_1.09.25.23". It also do not have 850Mhz. Is Radio 1.09.25.23 not Quad band support? But it appear when using original ROM.
Most radios support quad band UMTS.
DiAM100 devices do NOT though and this is a hardware limitation.
Hey man, from what you get diam100 have no quad band?
mine has!
Yuna said:
Hey man, from what you get diam100 have no quad band?
mine has!
Click to expand...
Click to collapse
The context of 'quad' band in this thread is in relation to the Aussie Telco 'NextG' network which requires 850MHz UMTS connectivity - something you DON'T have on a DIAM100.
You meant only UMTS 850mhz or simply 850mhz (GSM & UMTS)?
Yuna said:
You meant only UMTS 850mhz or simply 850mhz (GSM & UMTS)?
Click to expand...
Click to collapse
We're discussing 'NextG' which is 850MHz UMTS although Telstra do have 3G service via 2100 UMTS as well...
Hey guys,
thanks for the large amount off support. I check my phone. I have a DIAM130.
And I installed duttys cab and chose GSM(1900+850)+UMTS(1900+850)
and it still isnt doing what I want it to do.
Those that have nextg here know that you get access to bigpond, and foxtel mobile tv.
But this isnt working. I think there might be something in the registery I might have to change or something for it to know that its a telstra device.
Apologies if this is a stupid question;
Can I find out what frequency the Desire is using at any time? ie which 850/900/2100 band?
Just replaced an 850/2100 Desire with a UK-originated 900/2100 and the speedtest results have almost doubled.
Just want to see if it is still using the 2100mhz network or somehow it's using a 900mhz band with better results
Sidenote: in Australia we have 850mhz desires
Does anybody have any solution on finding out which frequency the Desire is using at a given time?
Thank you
ix9 said:
Apologies if this is a stupid question;
Can I find out what frequency the Desire is using at any time? ie which 850/900/2100 band?
Just replaced an 850/2100 Desire with a UK-originated 900/2100 and the speedtest results have almost doubled.
Just want to see if it is still using the 2100mhz network or somehow it's using a 900mhz band with better results
Sidenote: in Australia we have 850mhz desires
Click to expand...
Click to collapse
The 850Mhz is only for Telstra. If you with any other provider (3, Vodafone, Optus) you should get the EU version! If you use telstra one with let say 3 card in it, you will only get 3G when you have access to 2100Mhz network.
My Desire is telstra one and im with telstra, speed test results are better comparing to HTC Hero on 3. Im getting around 500-1000kbps better results.
Only problem is that Melbourne server is gone from speedtest.net, and now we testing connection to Canbera and Adelaide so results will be diffrent.
ix9 said:
Apologies if this is a stupid question;
Can I find out what frequency the Desire is using at any time? ie which 850/900/2100 band?
Just replaced an 850/2100 Desire with a UK-originated 900/2100 and the speedtest results have almost doubled.
Just want to see if it is still using the 2100mhz network or somehow it's using a 900mhz band with better results
Sidenote: in Australia we have 850mhz desires
Click to expand...
Click to collapse
I live in Mexico and have a European Desire and want to change to 850 since Telcel (cel provider) is what uses.
Any help on how I can achieve this?
wrong problem explained
What I meant was for the 3G 850 band
You have to buy a new phone! The A8181 Desire does not support that frequency - you need an A8183 Desire.
Regards,
Dave
foxmeister said:
You have to buy a new phone! The A8181 Desire does not support that frequency - you need an A8183 Desire.
Regards,
Dave
Click to expand...
Click to collapse
Thanks for the answer dave, I was hoping there were some software tweaks.
Regards
I know I'm dredging up an old thread, but I searched and have not found a way to display which of the 3G frequency bands is being used at any given moment by my Desire. Does anyone know of an app that does this? I would be surprised if there is not an android app that does this, since it seems there are such apps for other platforms.
Hi Guys,
Well, this is my first time posting here, so hello to you all!
Anyway, down to my problem. I have a Desire Z A7272 running on the Australian Telstra network. I just bought a new sim card today that is Next G activated.
I have a few problems which I am hoping to solve by asking you experts First of all note that the Telstra Next G network runs on the 850mHz bandwidth, which I believe my phone does not support. Seeming as I live in regional Australia, this is undesiarable because although 21000mHz is supported and available, Telstra only runs it in the metro area, where it doesn't reach me.
I was searching the net for a couple of days until I found a forum where it explained how to lock the GSM bands. I can't link it as I have lost the page. What I did was dial *#*#4643#*#* and change the network lock to "United States". This was because in the US they don't have the 900mHz band they use the 850mHz band and I was hoping to get my phone to use the 850mHz band.
Now to my 2 problems.
1. When I locked the phone to the 850mHz band, it seems that I can't access *#*#4643#*#* anymore. I type the number in, and nothing opens. I was wondering how to fix this so I could set it up to "Automatic" again.
2. I was wondering if there is anyway hardware or software wise to be able to access and use the 850mHz network. If you could link or quote some reliable/trusted sources that would be excellent. I will take unknown sources but will do with caution, I don't want to break my 2 week old phone.
Thanks guys, sorry for the essay.
Haash.
EDIT: Please note that my phone is running Android 2.3.3 with HTC Sense 2.1.
Your phone is only capable of accessing whatever bands your hardware is designed to. I don't know the specs for your Desire Z, but if the bands you want are not listed in the hardware specs, you will NEVER get them. You would need to investigate whether there is a desire z model built to run on the gsm spectrum you need.
For example, here in the US, Tmobile and AT&T phones can be unlocked to use on each other's EDGE network. But no magic code can ever give them the hardware needed to run each other's 3G network.
Sent from my T-mobile G2 using Tapatalk
Nospin said:
Your phone is only capable of accessing whatever bands your hardware is designed to. I don't know the specs for your Desire Z, but if the bands you want are not listed in the hardware specs, you will NEVER get them. You would need to investigate whether there is a desire z model built to run on the gsm spectrum you need.
For example, here in the US, Tmobile and AT&T phones can be unlocked to use on each other's EDGE network. But no magic code can ever give them the hardware needed to run each other's 3G network.
Sent from my T-mobile G2 using Tapatalk
Click to expand...
Click to collapse
Thanks, now all I need to do is get my *#*#4643#*#* working again so I can change it back to the 21000mHz network that I can use.
For anyone wondering:
Europe:
HSPA/WCDMA: 900/2100 MHz
GSM: 850/900/1800/1900 MHz
Asia Pacific:
HSPA/WCDMA: 900/2100 MHz
GSM: 850/900/1800/1900 MHz
BUT, for the Tmobile G2 (American version)
GSM:
850, 900, 1800, 1900
UMTS:
1700/2100, 2100
Thanks, does anyone know how to unlock *#*#4643#*#*?
Sent from my HTC Desire Z
It could possibly be that the code you're using isn't correct. I believe it is *#*#4636#*#*
Sent from my HTC Vision using XDA App
hellorufino said:
It could possibly be that the code you're using isn't correct. I believe it is *#*#4636#*#*
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Oh wow thank you so much. I feel like a complete idiot now. Thanks a ton.
Sent from my HTC Desire Z
i wish the new roms can make this possible, i want to force 3g sometimes..
Hello every1!
A friend just got his hands on his HTC HD7S from AT&T but, he is trying to use in another carrier here in Brazil but it can only make calls and use Edge network.
My HTC HD7(not the S one) is from TMobile and everything works fine here in brazil with same SIM card/Carrier.
I heard that Those HD7S from AT&T has a diff frequency and our carrier is not working with 3G at that frequency.
So, my question is:
Is there any way to help this friend and his HD7S to get 3G working on his device? Like for sample, flash a ROM(which one? Links?) that enable full range of frequencies like my HD7?
Thanks! I really appreciate the help. My friend is so sad that he cant use his phone well that I decided to help him.
Thanks a lot!
Best regards...
Gutemberg
Well, HD7 3g bands are different than hd7 3g bands, so I suppose the network you are trying to use is something like 900/1700 MHz on 3g. If so then it will not have 3g except if you use it in another carrier (a 850/1900MHz one)
I purchased the newly released UMI X2 Android phone. I am unable to use the TMobile 3G network. I am only able to use 2G/EDGE.
Voice and data quality are very bad, almost the phone is unusable. I spoke with T-Mobile and was informed that my modem does not support 1700 MHz and there are effort to re-farm TMobile network to support 3G on 1900Mhz but not set date yet. When I scan for available network I get three networks were available
T-Mobile 2G
AT&T 3G
AT&T 2G
Operating System: Android 4.2.1 OS
Processor: 1.2GHz MTK MT6589 quad-core processor
Connectivity Technology: GSM network & WCDMA - Standard SIM card
Network Band: GSM 850/900/1800/1900 MHz & WCDMA 850/2100MHz
Data Technology: GPRS, EDGE, HSPA
Baseband version
MOlY.WR8.W1248.MD.WG.MP.V2.P1
I would appreciate any help to get my phone to work on 3G.
YAF said:
I purchased the newly released UMI X2 Android phone. I am unable to use the TMobile 3G network. I am only able to use 2G/EDGE.
Click to expand...
Click to collapse
Did you make any progress with this? I recently purchased UMI X2, for use with T-Mobile UK. But have the same problem of not being able to connect to 3G networks - it works okay on 2G/EDGE.
I know the phone supports 3G on 2100MHz, and there's been some debate whether it supports 850/900MHz as well, but I've not found a definitive answer to that.
There's an operator in the UK (Hutchinson 3G UK Ltd) that only have a license for 2100MHz. So I was expecting the phone to work fine on their network- but no go... phone won't register on network at all - even though it shows in the available networks list.
I'm now searching to see if anyone else has been having problems - as it's beginning to look like faulty phone hardware - rather than trying to use unsupported frequencies...
acid meaand
I am still in the same situation, I am unable to use the 3G network for T-Mobile.
I am looking into getting 4G Wireless Hotspot modem $50 from the same carrier, use my SIM card on the modem, and use my UMI X2 as pure IP phone. There are many issues, but it looks promising.
Please keep me updated with any progress you make.
Regards;
I have the same problem...
I have this same problem with a operator here in Brazil. Every 3G operator in Brazil, using 2.1GHz band, works fine except one: VIVO.
I can see the network when I click on "manual search", but the phone can't connect. My baseband is:
moly.wr8.w1248.md.wg.mp.v7.p1 2013/04/10 00:39
How can change this baseband to another? I tried to update firmware but unfortunately the newest firmware has the same baseband version.
firmware update will not solve the problem
Firmware update will not solve the problem. Until the manufacture identifies the problem and provides a solution, the problem is outstanding.
Beside the hardware has to be compatible and can support more frequencies which no one can confirm for the UMI or any other chines unlocked phones.
But, this is just my humble opinion.
I Found a solution (at least for me)
I think I found a solution for my problem. I flashed this very new (2013/07/17) rom, with a new baseband MOLY.WR8.W1248.MD.WG.MP.V7.F2.P1, 2013/07/10 23:14 that corrects 3G dropouts and disconnects. Now my 3g works find, with H and sometimes H+. Fast and reliable like it should be. The link for this new ROM is:
http://www.needrom.com/mobile/umi-x2-based-official-for-europeus/
Thanks for the update.
I have two questions.
1- There are two files in the link you provided UMI-X2-basedon_Official_250613.zip and UPDATE_UMI-X2-THB-ROM-based_on_Official_170713.zip. Which do use?
2- You mentioned the updated corrected 3G dropouts and disconnects, but do you know if the update have these frequencies to get 3G?
3G (850, 900, 1700, 1900, 2100 MHz)
HSPA+ 42
P.S
GSM/EDGE/GPRS (850, 900, 1800, 1900 MHz) original specs
YAF said:
Thanks for the update.
I have two questions.
1- There are two files in the link you provided UMI-X2-basedon_Official_250613.zip and UPDATE_UMI-X2-THB-ROM-based_on_Official_170713.zip. Which do use?
2- You mentioned the updated corrected 3G dropouts and disconnects, but do you know if the update have these frequencies to get 3G?
3G (850, 900, 1700, 1900, 2100 MHz)
HSPA+ 42
P.S
GSM/EDGE/GPRS (850, 900, 1800, 1900 MHz) original specs
Click to expand...
Click to collapse
I used the file UPDATE_UMI-X2-THB-ROM-based_on_Official_170713.zip. It was based on the Official ROM from 07/17/2013, but I was unable to find the official stock version. This version has a very new bandbase that, supposedly, fixed the problem with 3G on some operators.
3G on Brazil is on 2100 MHz, sometimes on 850MHz but in my case the problem was on 2.1GHz band. Three WCDMA operators in Brazil, all in the same 2.1GHz frequency, work fine, but VIVO doesn't. Now, with the new rom, it works with no drop outs for over a day now.
no changes or additional frequencies
I successfully applied the update but no changes or additional frequencies
I have serious issues with HSDPA, t-mobile uk works but only on GPRS and it keeps dropping out. GiffGaff seems to work without dropping out. It has worked for a minute on HSDPA today but only once. Other than that t-mobile has been dropping out badly. GPRS works for a bit then it drops out. I have took an MTK modem log with MobileUncle Tools to see what it says but haven't looked at it yet. Trying to work out if it is a hardware issue or Baseband.
I get this from my X2 Radio Logcat:
https://www.friendpaste.com/2ltEW0wuHjzkDZiRQb9m7g
hi everyone, i have UMI X2 and i repair the bad gsm signal, i put to gsm connector Cu wire and signal now working very good!!!!!! sorry for my english i am from slovakia
:victory:
00alkskodi00 said:
hi everyone, i have UMI X2 and i repair the bad gsm signal, i put to gsm connector Cu wire and signal now working very good!!!!!! sorry for my english i am from slovakia
:victory:
Click to expand...
Click to collapse
Hi,
do you have a description and a photo of how you did it?
How long the Cu wire has to be? And where to connect it?
Many thanks in advance.