Related
I have no idea where to put the new ra-evo recovery file so that fastboot sees it. I have looked sorry for the stupid question
your fast boot should be installed in ur android sdk tools folders so if thats where ur fast boot is then put the file in the tools folder
Fastboot flashes files from your computer not on the sdcard or anything.
Ex. Fastboot flash recovery /User/downloads/recovery.img
Sent from my PC36100 using XDA App
i am so confused
so if I am rooted and unlocked and I already have the original amon recovery i just put the new amon recovery in the tools folder. then how do I get it on my phone
if you already rooted you should have android sdk installed
easyest way
go to start
my computer
c drive or your main drive
android sdk or sdk (wat ever you named it)
tools folder
put recovery in tools forder
open a command prompt and
cd \android-sdk
cd tools
now your in the tools folder
fastboot flash recovery /recovery.img
it is easyer and faster no searching for the files if you put the recovery in the tools folder its already there no going to filesfoldersdownloads you dont need them commands its faster and easy look through the adb and sdk guides it has all commands and most recover forums tell you all this
so i need to change the name of the amon recovery image to recovery.img
No he was just using recovery.img as a example.
Sent from my PC36100 using XDA App
Here's how i did it this morning, downloaded file to pc, connect phone as disk drive, opened disk drive, placed the amon file into the sdcard, changed phone back to charge only, went to astro to verify that the amon file was on the home list of files, then wen to market and downloaded terminal emulator free, and just follow Amon's instructions to apply using terminal or adb, it was reall easy that way, i kept trying to load the fastboot way and just couldn't figure it out, so i tried this was and perfect, new recovery, and hopefully i can wipe dalvik now.
You don't need fastboot to flash a new recovery image. Like tomh said in the post above this one, put the new recovery on the root of your sdcard, open a terminal emulator on your phone and type the following:
flash_image recovery /sdcard/name_of_recovery.img
I haven't used my computer to update a recovery image since I first got my Hero.
with a terminal app you'll want to use this exact cmd's
su(press enter)
flash_image recovery /sdcard/recovery-RA-evo-v1.8.0.img(press enter)
reboot recovery(press enter)
that's just as amon_ra has it, same as what i used as well.
thanks for the help
shawnten said:
thanks for the help
Click to expand...
Click to collapse
Somewhere on your PC. You just have to give the path to the fastboot command.
Sent from my HummerPhone using the XDA App
i just downloaded the terminal emulator onto my evo but when i type the first cmd "su" it says permission denied. please tell me how do i get passed that.
ro2themax said:
i just downloaded the terminal emulator onto my evo but when i type the first cmd "su" it says permission denied. please tell me how do i get passed that.
Click to expand...
Click to collapse
Root your phone..
i jsut use rom manager. I am to lazy to do everything else currently rom manager has the latest amon ra you can tell it to flash as an "alternative" recovery. takes 2 seconds and no typing out "long" commands in terminal.
i was under the impression i was rooted...i did the OTA update to 2.2 then used the method to root that came out a week ago using unrevoked3 and unrevoked forever. but instead of going back to a rooted 2.2 i stayed on a rooted 2.1.
ro2themax said:
i was under the impression i was rooted...i did the OTA update to 2.2 then used the method to root that came out a week ago using unrevoked3 and unrevoked forever. but instead of going back to a rooted 2.2 i stayed on a rooted 2.1.
Click to expand...
Click to collapse
Huh, that's weird. What rom are you using?
If you're using a rooted rom then you should be getting a # when you type "su" into the terminal..
Do you have the SU app installed? Did you get an SU Permission request when you opened the terminal for the first time? If so, did you grant the terminal emulator SU permission?
im using a stock 2.1 rom and i do have superuser permissions installed. i also have setcpu for root users installed and "su" grants "setcpu" permission.
i also forgot to mention that i also put a "netarchy kernal" on their also which appears to me, works as it said. right now if i want to go into recovery it goes through clockwork, but i want to get amon ra's recovery on there instead.
ro2themax said:
im using a stock 2.1 rom and i do have superuser permissions installed. i also have setcpu for root users installed and "su" grants "setcpu" permission.
Click to expand...
Click to collapse
hmm.. which 2.1 stock? Was it a rooted stock (with busybox and su already in there) or did you install the su app?
Although sounds like it already had busybox if setcpu is getting permission.
If you are near your computer see if you can get a # using the adb shell. I'm a little stumped here..
the 2.1 stock came with the "su" already. i just posted a quick update on the my previous post that i flashed a netarchy kernal on my evo also. i dont know if that helps but i just forgot to mention it...
please bare with me, im by my computer and to go into adb shell do i need to plug my evo in as charge only and open a cmd from android tools to see if i get # ???
[Update 12/23] For those of you unable to install the new system update, I've found a solution -- scroll down to the update! I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY OCCUR!
So I figured I'd at least get things started - Credit goes to whomever first tried z4root on their Droid Pro - and to mahst687 for the deodexing.
Lets Begin!
Resources:
Motorola ADB Driver
Android SDK
xUltimate V2.2.2
(Can't post links apparently, sorry -- googles your friend!)
#1 Root:
As seen on numerous android sites already, root is obtainable via z4root in the market. It may not work the first, second, or even third time -- just keep trying, it works I promise.
#2 Bootstrap and Clockwork Recovery
Download and install 'Rom Manager' from the Market. Once installed flash the Droid2 Clockwork Recovery. After flashing, obtain the Droid2 Bootstrapper and install it. Confirm Clockwork Recovery works by booting to recovery via Bootstrap.
#2 Deodex:
Download Android SDK for ADB, as well as the Motorola ADB Drivers posted above. Second, download xUltimate - also posted above. Once everything is downloaded and installed we're ready to begin.
1. Run Main in the xUltimate package - if the ADB drivers installed successfully you should be greeted with a menu containing several options - great!
2. Next run option 1.
3. Run option 2.
3. Run option 3 - sit back and relax for a bit
4. Once option 3 is done doing its thing, navigate to the xUltimate folder, more specifically the "origi_frame", and delete guava.odex
5. Run option 4 - it'll be a short wait
6. Exit the xUltimate
7. Enable USB Mass Storage on the phone and transfer both "done_app", and "done_frame" to the ROOT of the SD card.
8. Once both folders have transferred disable USB Storage, but keep the phone plugged in via USB.
9. Open up a command prompt and browse to the android SDK Tools folder (or where ever your ADB executable is located).
10. Enter the following commands:
Code:
adb shell
su
stop
mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
cp /sdcard/done_app/* /system/app/
cp /sdcard/done_frame/* /system/framework/
rm /system/app/*.odex
rm /system/framework/*.odex
mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
reboot
11. If all went well your phone should reboot - which may take a few minutes. Enjoy!
[Update]12/23/2010
For those of you unable to get the new Droid Pro OTA working I have found a solution! You will need:
1)Root
2)Clockwork Recovery
3)System.img from update
4)Current Nandroid backup of your phone
5)ADB drivers and ASDK
So lets begin.
1)Boot into Clockwork recovery and create a backup of your phone.
2)Once complete, mount the phone as USB storage and pull the system.img file from the nandroid backup folder, as well as the nandroid.md5 (KEEP THESE FILES SAFE!!!!!)
3)Obtain the system.img file from here (Compliments of whoopsiedaisy).
4)Replace the system.img file in the Nandroid backup folder on your PHONE.
5)ADB into your phone (preferably still in recovery) and do the following:
Code:
adb shell
# cd /sdcard/clockworkmod/backup/2010-xx-xx.xx.xx.xx
# rm nandroid.md5
# md5sum *img > nandroid.md5
6)If all goes will it should create a new MD5 checksum file utilizing the new system.img
7)Go to the 'backup and restore' menu in Clockwork, and select 'Advanced Restore'
8)Select the correct nandroid backup folder where the new system.img file is located, and then select 'Restore System'
9)Assuming all goes well, go to Settings, About and check your new system version!
Nice, can't wait to try this on my wifes phone after work.
Sent from my ADR6300 using XDA App
Is the second step necessary if you just want root access so you can install Wireless tether, etc?
jayhammy said:
Is the second step necessary if you just want root access so you can install Wireless tether, etc?
Click to expand...
Click to collapse
Not at all. Simply run z4 if all you require is root access (and a host of apps like Wireless Tether, DroCap, Titanium Backup ...)
Can you please post the quickoffice apk from the Dpro so I can put on an DX? Same would go for the software that allows me to Invite attendees to meetings using GAL. It be copasetic if you can.
Thanks a ton! Freaking worked flawlessly on my Droid X.
Nate
Cool. Cant wait to try this on my wife's phone.
I downloaded everything you said and i started my deodex but when i select option 3 in main it tells me "error no odex file" have i done something wrong please advise
Is it really that simple?
I feel like I must be missing something. I just download an app from the market and reboot and I'm rooted?
Also, what is the deodex for? I want to root my phone to install the apps I want and I want wifi tether. Do I need it?
Also, I really want to understand what is going on under the hood, but I don't know where to start. Is there a 'for dummies' tutorial somewhere that I can go to to start understanding what all of this stuff is, so I can make informed decisions for myself about what I want instead of begging for help on internet forums? Thanks in advance for any suggestions.
Is there a way to unroot? I am not rooted but just curious.
rllong1 said:
Is there a way to unroot? I am not rooted but just curious.
Click to expand...
Click to collapse
Yes, Z4Root app allows you to root, re-root, and UNroot.
I see no uproot button on the screen. Only a root button
Sent from my DROID PRO using XDA App
I had version 1.1 of z4. I now have the. 3 version and it has the unroot button
Sent from my DROID PRO using XDA App
rllong1 said:
I see no uproot button on the screen. Only a root button
Sent from my DROID PRO using XDA App
Click to expand...
Click to collapse
You'll only see the unroot button once you've rooted. Otherwise, it will first show only the "root" option.
jayhammy said:
You'll only see the unroot button once you've rooted. Otherwise, it will first show only the "root" option.
Click to expand...
Click to collapse
I was rooted. I had titanium installed and superuser. Z4 ran fine but I had an old version of it. I dont know if that matters but thats all I did. I downloaded the 1.3 version and I now have the unroot button. On the old version there was no option for temp root either. Just root. On the version I have now there is a temp root and perm root button.
Would just like to let people know that your method for "updating" via nandroid backup would not work for me. Followed all the instructions to the letter and during the advanced restore I continually received md5sum mismatch errors.
So I took the chance and updated through the OTA update, it installed fine but lost root. Ran z4root (twice) and gained root access again .
Looking forward to some real custom daily driver roms for this guy.
darkninja157 said:
Would just like to let people know that your method for "updating" via nandroid backup would not work for me. Followed all the instructions to the letter and during the advanced restore I continually received md5sum mismatch errors.
So I took the chance and updated through the OTA update, it installed fine but lost root. Ran z4root (twice) and gained root access again .
Looking forward to some real custom daily driver roms for this guy.
Click to expand...
Click to collapse
Is there a way to uninstall the CWM recovery?
darkninja157 said:
Would just like to let people know that your method for "updating" via nandroid backup would not work for me. Followed all the instructions to the letter and during the advanced restore I continually received md5sum mismatch errors.
So I took the chance and updated through the OTA update, it installed fine but lost root. Ran z4root (twice) and gained root access again .
Looking forward to some real custom daily driver roms for this guy.
Click to expand...
Click to collapse
Kinda new to the whole rooting thing, just got a new Pro and rooted successfully with z4root, got rid of bloatware and installed titanium backup, wifi tether, etc. Am I correct in reading your post that I can unroot, OTA update, and re-root again? If so, will I have to uninstall bloatware again, or reinstall root apps? Or any other repeats? Any danger in doing this?
mynameismolotov said:
Kinda new to the whole rooting thing, just got a new Pro and rooted successfully with z4root, got rid of bloatware and installed titanium backup, wifi tether, etc. Am I correct in reading your post that I can unroot, OTA update, and re-root again? If so, will I have to uninstall bloatware again, or reinstall root apps? Or any other repeats? Any danger in doing this?
Click to expand...
Click to collapse
No need to un-root. This update is for the system portion only and does not touch the userdata. I simply went ahead on the rooted phone, let the OTA update download and install. In doing so lost root, but had no trouble gaining root access again via z4root. Did not have to re-remove any of the bloatware, at least if I remember correctly. Root apps will not need to be reinstalled but you may need to re-give them permission for root access. No danger that I have noticed or can think of.
For anyone doing the update the android method....
For it to work
You must do the adb "new" md5 creation portion with your phone in clockwork recovery for it to work and to not receive the mismatch error...
To do this, reboot recovery... then plug in usb from your computer... during the phone boot into recovery you should hear the alert from your computer that something from usb was plugged in. Finally, use the mount option in recovery to mount sd card to be able to transfer the .img file over to the correct directory then unmount sd card and do the adb commands in terminal window...
I had the same mismatch errors using my windows 7 machine and creating the md5 with android booted
Hope this helps
A Work in progress.
DISCLAIMER!
This Document ONLY applies to Acer Iconia A100 devices. For info on upgrading from HC to ICS you can look HERE to see the method I used to upgrade from stock HC 3.2 GEN2 to ICS (Note: This was before the general ICS release. It works on OTA update also) Then follow these directions to get to CWM with Custom ROM.
I'm writing this because we STILL don't seem to have a single clear set of instructions. So here is my attempt at getting one started. Please feel free to point out errors, or help us build a set of directions. I'm not trying replace anyones documentation or take credit for anything. All the info in these directions can already be found here in various posts.
Thanks to Vache, Civato, ZeroNull, Euclid's Brother, Ptesmoke, abliss, aznmode, eew245, crossix, Icewyng, toyface, PG101, Smokku and Everyone else for all the Work an Insight.
ROOT
To root ICS Leaks you need to use mempodroid(info & file here). Eew245 wrote up instructions (on applying mempodroid on A100 to obtain a root shell). ZeroNull also has made a basic script found here that will root the device for you if you prefer.
I use the method outlined by Eew245. You can use your own "su" and "busybox" binaries if you saved them. This method provides full permanent root.
I suggest you install superuser.apk and busybox installer after rooting. Superuser.apk will provide access control for superuser and busybox installer will allow you to update busybox. I also recomend installing terminal emulator(don't forget to configure it to use /system/xbin/sh after you install busybox).
UNLOCK
ZeroNull has made an easy to use package with instructions here If you don't have the Android SDK installed ZeroNulls method works fine. However if you want to use your own platform-tools you will need to modify the scripts first.(Just change the path for adb. Otherwise it will try to look for adb in the scripts working directory instead of platform-tools).
Pic of Bootloader warning about unlocking from Acer
PIC HERE
Lock Unlock Icons from same bootloader screen.
PIC HERE
Note: If you miss the window of oportunity running the script or unlock commands the first time. You DON'T need to rerun the whole script. The a200 bootloader is already installed. You just need to fastboot reboot bootloader again from your console, THEN you can use the vol keys and home to unlock the bootloader. BUT do what ever you feel safest doing and just pay attention and be careful. (Here I'm referring to the waiting too long after the script boots recovery into unlock mode. If you wait too long it times out and you can't choose unlock until you fastboot reboot bootloader again.)
RECOVERY
(make sure you have installed the a200/unlocked bootloader first. You will see a message at the top of the screen that says (UNLOCK MODE) when bootloader is showing it's message at boot.)
Here is the message I'm referring to PIC HERE
NOTE: When installing a Custom Recovery at some point you have to rename /etc/install-recovery.sh or remove it. I would recomend you rename it to install-recovery.sh.bak. You should do this before doing "adb reboot bootloader" otherwise when you try to reboot into recovery from ROM manager you will get a dead android because cwm will be overwriten with the old recovery(and you don't want that). If you DO get a dead android carefully read the directions again. Q. Why didn't I put this in a step? A. Because I dont want people to brick a device so I want to make sure they are paying attention before I tell them to rename a file that will keep the system from fixing recovery if they mess up.
Using Acer Recovery Installer 2.99 Beta(NOT MARKET VERSION)
=======================================
Download .apk enable non-market installers. Run installer, enjoy.
The Acer Recovery Installer 2.99 Beta is found HERE
Using ADB/Fastboot to flash CWM
============================
Use the steps found HERE(obviously don't re-root, unlock, just follow the other parts.
Or you can also use A100 TWRP recovery v2.1.0+ I have not tried it yet. It looks nice, has touch screen functionality, I think it uses a different backup format or something though. I'm not sure and have not had time to read up on it yet.
NOTE: Read my note above about /etc/install-recovery.sh
FLASH FROM CWM
==============
If you used ADB/Fastboot method you will need a way to reboot into CWM. ROM manager or bootloader reboot thingie will work for this.
If you installed Acer Recovery Image you can use it the app to boot into CWM.
CWM 5.5.0.4 uses the Volume Up/Down Toggle to navigate the menu and a short click of the power button to select things. Be careful about what you choose to do in CWM.
MAKE A BACKUP!!
===============
If you have just installed a custom recovery NOW would be a GOOD time to make a backup with CWM.
To Install a Custom ROM
===============
(BE CAREFUL. MAKE SURE The ROM you choose to install DOESN'T have a bootloader.blob and/or /recovery folder inside. Otherwise it could overwrite your CWM)
Just put the .zip file on an SD card and put it into the device. Use ROM Manager or Acer Recovery Installer
More to come, and I will add some pics showing what various screen look like when I'm able.
"I suggest you install superuser.apk and busybox installer after rooting. Superuser.apk will provide access control for superuser and busybox installer will allow you to update busybox. I also recomend installing terminal emulator(don't forget to configure it to use /system/xbin/sh after you install busybox)."
So ZeroNull says to not update busybox ...you say to update it...is there really a problem if you update it??
cheeb said:
"I suggest you install superuser.apk and busybox installer after rooting. Superuser.apk will provide access control for superuser and busybox installer will allow you to update busybox. I also recomend installing terminal emulator(don't forget to configure it to use /system/xbin/sh after you install busybox)."
So ZeroNull says to not update busybox ...you say to update it...is there really a problem if you update it??
Click to expand...
Click to collapse
i +1 the question what will break if i update busy box?
cheeb said:
"I suggest you install superuser.apk and busybox installer after rooting. Superuser.apk will provide access control for superuser and busybox installer will allow you to update busybox. I also recomend installing terminal emulator(don't forget to configure it to use /system/xbin/sh after you install busybox)."
So ZeroNull says to not update busybox ...you say to update it...is there really a problem if you update it??
Click to expand...
Click to collapse
I don't know if this helps or makes things worst, but I have updated busybox after using Zeronull's root script on pretty much every ICS leak, CM9, and Flexreaper without any issues at all. I always read that warning, but ignored it because I need a more complete busybox version for certain tasks I run on my tablet.
NoSudo said:
A Work in progress.
Using ADB/Fastboot to flash CWM
============================
Use the steps found HERE(obviously don't re-root, unlock, just follow the other parts.
Click to expand...
Click to collapse
Just a little tip. Actually same thread post#28 uses very simple method thanks to mapaz04 to flash the recovery.
Great job though!
I did almost the same in my native language.
cheeb said:
"I suggest you install superuser.apk and busybox installer after rooting. Superuser.apk will provide access control for superuser and busybox installer will allow you to update busybox. I also recomend installing terminal emulator(don't forget to configure it to use /system/xbin/sh after you install busybox)."
So ZeroNull says to not update busybox ...you say to update it...is there really a problem if you update it??
Click to expand...
Click to collapse
I have not used ZeroNulls root method. So I am not sure why he says that. I think his script MAY just use the su and busybox in place in /data/local/ or something(not sure havnt D/L the package to figure it out). You CAN setup su and busybox in the correct locations WITHOUT an issue in ICS.
I use the "hard" method which is very simple. I KNOW you can remove the /data/local/tools copy afterwords doing it by hand.
An Explanation:
The reason you have to push su, mempodroid, busybox, and a mount script to /data/local/ is because you can get write access to it WITHOUT su. Then you run mempodroid which does a little magic and tricks system into thinking a shell was started by root. This drops you into the # prompt(temp). Then you mount /system(still using the files from /data/local). Then you copy the files to the correct path inside /system. Once you chmod su and run it you get root becase su is a special kind of executable. It's what is called an SUID application. As long as the permissions are correct to allow you read/exec access to both su and busybox. You no longer need /data/local/tools. At this point you CAN update busybox and su if you like.
P.S. You can also use your OLD su and busybox for the whole thing. I saved my old su and busybox and always just reuse them then update.
If you want to understand more I would suggest reading up on what SUID is all about and also learn about Unix file permissions.
I can confirm that: rooting,bootloader unlock and change on the recovery can be made with OTA update.
Nice work!
gertjanad said:
Nice work!
Click to expand...
Click to collapse
Thanks, and a bump to keep the info around the first page.
Added to bump it back up so people can find it.
Is there a kernel that allows overclocking yet
Sent from my A100 using XDA
I have not played with OCing, I honestly don't see a need.
I know cwm 5.5.0.x has an Overclock menu so I'm guessing yes you can. But I am not familiar enough with the device/cpu to know how the multipliers etc are to be configured, nor do I experience lag or performance issues that would cause me to desire lowering battery efficiency and increase heat for faster performance.
Though I am familiar with the process on PCs both jumpered and jumperless.
Up!
Hi guys, this is my second tutorial and in this one I will show you every thing you need to do to flash a custom ROM on the LG-P350. So let's get started.
DISCLAIMER: This is tampering with the system itself and if done incorrectly a simple factory reset will not fix it. It is YOU who is doing this on your phone and I am in no way responsible if any damage happens to your device. (tough it shouldn't if you follow these steps carefully) You have been warned!
WHAT WE NEED :
1.An LG-P350 running stock Froyo
2.LG mobile united drivers, get them from here https://docs.google.com/file/d/0B7Faau7Enf-Bc1hhbWRtTkczNEE/edit?usp=sharing
3.A PC running Windows (can be done on linux too but this guide is based on Windows)
4.A microUSB data cable.
5.The official Android SDK obtained from http://developer.android.com/sdk/index.html Make sure you select the version for your OS (32-bit or 64-bit)
6.USB debugging to be on. Go to Settings>Apps>Development>Turn on USB debugging
7.ADB to be properly set up.
8.Patience to read this thread carefully
1. Root
Ok so what is root? Well simply said rooting gives us the permission to modify parts of the Android system itself. Normally when you try to tamper with it it would simply say that either you don't have the privilege to do so or it would fail. When we have root permissions then you can change anything you want.
Note: Be careful tough, removing or modifying some parts of the system can damage the system and prevent it from working/booting. Always make a nandroid backup (will talk about this later) before editing anything in the system.
Now for the rooting itself.
Most versions of the software for the P-350 can be rooted using gingerbreak, which can be found here http://forum.xda-developers.com/showthread.php?t=1044765 Get the newest version, copy it and install it on your phone and follow the instructions on screen.
For those who prefer some other root method you can also use z4root which can be found here http://forum.xda-developers.com/showthread.php?t=833953 or superoneclick which can be obtained here http://forum.xda-developers.com/showthread.php?t=803682 (For superoneclick you need the USB cable and drivers installed)
2.ADB
Ok so what is ADB? ADB is a short term for Android Debug Bridge. It is one the most essential tools in the Android world and is used for a number of things such as sending commands (which can do anything you imagine with the device), getting various log data etc.
To set it up you will have to get the latest version of the official Android SDK (look for the link in the Introduction). Once you've downloaded the sdk you will get a .zip file you need to extract. I extracted mine to C:\Program Files (x86)\Android\ (so this guide is based on that) but it can really be anywhere. If you decide to put a different directory then adapt the guide to it. Once extracted you will get two folders. Here we only use the sdk one, the other one is for the Eclipse plugin used for application development. Open up the cmd from the start menu and then input these codes.
Code:
cd C:\Program Files (x86)\Android\sdk\platform-tools\ (you adapt this to your case if you didn't extract it there)
adb shell
Do this with your device connected otherwise it's pointless.
NOTE1: In order for adb to recognize your device you must have the drivers installed.
NOTE2: If you are too lazy to type all this every time you can make a .bat script. Open up notepad and copy/paste these codes
Code:
cd C:\Program Files (x86)\Android\sdk\platform-tools\ (adapt to your location)
adb shell
pause
After that just click on File and click Save as. In the window that opened, under file type select all files and on the file name save it as adb.bat
Now whenever you want to use adb you can just double click on the script you made and it will open up adb instantly leaving out the hassle of typing in commands every time.
3.Recovery
Now that we have root it's time for the recovery module.
The recovery allows us to modify parts (or even the entire) system by "flashing" (installing) .zip files prepared by our developer. They can be tweaks,fixes, additional features or even a completely new version of Android. There are a couple of ways to do this and the choice is yours.
Before you do this you need to get a recovery image. We have a couple of them for our device:
1. AmonRa-The very first recovery for our phone. It is outdated and generally not recommended for use. If anyone wants it you can get it here http://forum.xda-developers.com/showthread.php?t=1080911
2. CWM (clockwork mod recovery)- One of the most popular recoveries around. It is a well made piece of software which will make flashing simple and fast. We have a couple of versions for our phone and the links are here:
http://forum.xda-developers.com/showthread.php?t=2075797&highlight=recovery ClockWorkMod 6.0.2.7
http://forum.xda-developers.com/showthread.php?t=1768895&highlight=recovery ClockWorkMod 6.0.1.4
You will also need a flash_image file gotten from https://docs.google.com/file/d/0B7Faau7Enf-BTURDQmp1OWIzVGM/edit?usp=sharing
Method 1: cmd
Ok so this tutorial is from a developer who has retired and who made the original recovery our phone. All credits for that go to him.
Also note that it is recommended to reboot the device prior to flashing to increase the RAM.
1.Copy the .img file and copy the flash_image file to the rood directory of your sd card NOT in some folder. If you got your recovery in a .zip then extract the .img file from it and copy it and the flash_image file to the root of the sd card.
2.Using ADB shell copy these commands into the cmd :
Code:
$ su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cat /sdcard/flash_image > /system/bin/flash_image
# chmod 755 /system/bin/flash_image
# sync
3.Now flash it:
Code:
$ su
# flash_image recovery /sdcard/*insert image name here*.img Here you should put the name of your .img file without the starts ofc :)
# sync
4.After that if no error occurred you can type this in
Code:
reboot recovery
WARNING: If some sort of error showed up DO NOT type in reboot recovery. This could brick your device. Instead restart the phone and start over.
Method 2: Venkat's toolkit RECOMMENDED
This toolkit does the same from above but it does it automatically without the user having to do anything. You can get it from here http://forum.xda-developers.com/showthread.php?t=1948326 It can also be used for rooting.
It is also recommended to make a nandroid backup of your current system in case you want to go back. Nandroid backup is a complete copy of your system as it is when the backup was made. It backs up EVERYTING not just apps and data, so it is a perfect thing to have if a ROM or a tweak you are trying render the phone unbootable since you can just restore the backup you made and no harm done.
That is recovery. Now you can use it to flash whichever ROM for our device you choose. You can boot to it either by typing in adb/terminal reboot recovery or by pressing the following buttons when the device is turned off: Power + Call + Volume Down. Also don't worry if the touchscreen doesn't work in the recovery. That is normal use the volume up and down buttons to navigate menus and either the menu button(for amon ra) or the call (CWM) to confirm your choice.Use the back/power button to cancel/go back.
4.Flashing
Flashing is a process where we install the entire system or its parts contained in .zip files from the recovery module.
NOTE When you get a flashable .zip package DON'T extract it to the sd card. Copy it as you got it to the root of the sd and then continue.
Now that you've gotten the ROM you desired the process is pretty straight forward. Copy the .zip file you got to the root directory of your sd. Once you've done that, reboot to recovery and make a nandroid backup (if you haven't done so already) and go to the option install zip from sd card. Then choose the .zip you copied and confirm. After it says install complete you can reboot your device.
NOTE 1: Flash only things that are either universal or made for this device. Flashing stuff not made to work on this device could damage it.
NOTE 2: When flashing new ROMs you MUST wipe Dalvik cache,cache and data partitions. It is also recommended to wipe Dalvik cache when flashing kernels.
Those are pretty much all the basics you need to get into the flashing stuff You can find loads of ROMs and other tweaks on the official P-350 forums here on xda http://forum.xda-developers.com/forumdisplay.php?f=1769
You can also find info and development support on our Facebook page https://www.facebook.com/groups/p350development/
Revision 1: Added tutorial for setting up adb, explaining what adb is, as well as an adb script code.
i think this thread need to stick, try to contact mods
A comment on the 'adb' way. Before executing the commands, you might want to cd to where adb.exe is because you will have an error executing the command and the terminal will show 'adb is not a valid command'
Sent from my X8 using xda premium
---------- Post added at 07:09 AM ---------- Previous post was at 07:07 AM ----------
And installing android sdk is optional because there are standalone adb available for download.
Sent from my X8 using xda premium
Ya sticky this thread mods, cuz' i read, Many people stuck at LG Logo or fastboot mode even hard reset when flashing ROM without recovery before..
Sent from my LG-P350 using xda app-developers app
rho57 said:
A comment on the 'adb' way. Before executing the commands, you might want to cd to where adb.exe is because you will have an error executing the command and the terminal will show 'adb is not a valid command'
Sent from my X8 using xda premium
---------- Post added at 07:09 AM ---------- Previous post was at 07:07 AM ----------
And installing android sdk is optional because there are standalone adb available for download.
Sent from my X8 using xda premium
Click to expand...
Click to collapse
It already is set to the adb.exe path that's needed in order for adb to be activated on Windows. That's why we use the cd C:\Program Files (x86)\Android\sdk\platform-tools
And I know but there are a lot of other useful tools as well. And it is most reliable too.
Good job dude
Why complicated more then needed. Just make tut with andking toolkit.
boyan81 said:
Why complicated more then needed. Just make tut with andking toolkit.
Click to expand...
Click to collapse
Not complicated, this is a basic tutorial for those who don't want/can't use his toolkit. It also has some explanations about basic Android terms which you won't find there.
It would be nice if you update the wiki too, as there is an old but yet usable guide which pretty much has the same information written here...
Sent from my GT-S5830M using Tapatalk 2
I had previously rooted my phone and everything was fine... The OTA 4.2.2 update came automatically and took away root (but kept the bootloader unlocked). A few months passed and I decided to reroot using the same approach as before .... it fails. It looks like it works, but once the phone reboots I don't have root access.
Note I am using the following commands:
> adb push su.zip /sdcard/
> fastboot flash recovery recovery-clockwork-5.5.0.4-toro.img
> adb reboot bootloader
Then I select install from sdcard and selecting the su.zip file and back out / reboot.
Only odd thing I see is that I have two superuser apps installed (must have used different zip files). But neither app works...
ChrisG12 said:
I had previously rooted my phone and everything was fine... The OTA 4.2.2 update came automatically and took away root (but kept the bootloader unlocked). A few months passed and I decided to reroot using the same approach as before .... it fails. It looks like it works, but once the phone reboots I don't have root access.
Note I am using the following commands:
> adb push su.zip /sdcard/
> fastboot flash recovery recovery-clockwork-5.5.0.4-toro.img
> adb reboot bootloader
Then I select install from sdcard and selecting the su.zip file and back out / reboot.
Only odd thing I see is that I have two superuser apps installed (must have used different zip files). But neither app works...
Click to expand...
Click to collapse
adb reboot bootloader ?? or fastboot reboot-bootloader?? you are supposed to be in fastboot mode.
i dont know if this will make sense: flash latest CWM http://www.clockworkmod.com/rommanager and install latest supersu http://download.chainfire.eu/324/SuperSU/UPDATE-SuperSU-v1.30.zip
open supersu and update su binary
install busybox
2 in a row: OP, read the stickies on general and q&a by efrant before asking questions.
a maguro wrote this.
Actually - I did read the stickies before posting - thanks though. I know how to root - done it on a few devices in the past. Done it successfully on my Nexus in the past too...
For the record, those commands I listed are valid (they are from instructions on Droidlife.com and XDA) - I prefer not to use a "one-click" tool. So I use the Android SDK and run commands from a DOS window one at a time. Also - this way I don't have the custom ROM permanently installed on my phone...
That exact procedure worked in the past - but now it doesn't. I've tried the latest roms, etc. nothing - all the commands seem to run fine but after the phone reboots - I don't have root.
I did at one point try one of the one click tools ("Nexus Root Toolkit") - but it didn't seem to work either.
Has anyone seen this problem? I seem to have two copies of supeuser installed on my phone (one from the previous successful rooting and one from my current attempts) - is that a problem? I can't seem to get rid of them (chicken and egg - need root to remove APK)...
Huh? Superuser? Use SuperSU. Here, check this thread. http://forum.xda-developers.com/showthread.php?t=1538053 - the flashable zip is on the first post. Now, what you should do is, while on a custom recovery, 'adb shell', mount /system rw, delete traces of previous su zips, and then flash SuperSU zip.
a maguro wrote this.
Thanks man - that did it!
ChrisG12 said:
Thanks man - that did it!
Click to expand...
Click to collapse
Please edit thread title to include [SOLVED] after [Q]; reported to mod team for closing.
a manta wrote this.