I have no idea where to put the new ra-evo recovery file so that fastboot sees it. I have looked sorry for the stupid question
your fast boot should be installed in ur android sdk tools folders so if thats where ur fast boot is then put the file in the tools folder
Fastboot flashes files from your computer not on the sdcard or anything.
Ex. Fastboot flash recovery /User/downloads/recovery.img
Sent from my PC36100 using XDA App
i am so confused
so if I am rooted and unlocked and I already have the original amon recovery i just put the new amon recovery in the tools folder. then how do I get it on my phone
if you already rooted you should have android sdk installed
easyest way
go to start
my computer
c drive or your main drive
android sdk or sdk (wat ever you named it)
tools folder
put recovery in tools forder
open a command prompt and
cd \android-sdk
cd tools
now your in the tools folder
fastboot flash recovery /recovery.img
it is easyer and faster no searching for the files if you put the recovery in the tools folder its already there no going to filesfoldersdownloads you dont need them commands its faster and easy look through the adb and sdk guides it has all commands and most recover forums tell you all this
so i need to change the name of the amon recovery image to recovery.img
No he was just using recovery.img as a example.
Sent from my PC36100 using XDA App
Here's how i did it this morning, downloaded file to pc, connect phone as disk drive, opened disk drive, placed the amon file into the sdcard, changed phone back to charge only, went to astro to verify that the amon file was on the home list of files, then wen to market and downloaded terminal emulator free, and just follow Amon's instructions to apply using terminal or adb, it was reall easy that way, i kept trying to load the fastboot way and just couldn't figure it out, so i tried this was and perfect, new recovery, and hopefully i can wipe dalvik now.
You don't need fastboot to flash a new recovery image. Like tomh said in the post above this one, put the new recovery on the root of your sdcard, open a terminal emulator on your phone and type the following:
flash_image recovery /sdcard/name_of_recovery.img
I haven't used my computer to update a recovery image since I first got my Hero.
with a terminal app you'll want to use this exact cmd's
su(press enter)
flash_image recovery /sdcard/recovery-RA-evo-v1.8.0.img(press enter)
reboot recovery(press enter)
that's just as amon_ra has it, same as what i used as well.
thanks for the help
shawnten said:
thanks for the help
Click to expand...
Click to collapse
Somewhere on your PC. You just have to give the path to the fastboot command.
Sent from my HummerPhone using the XDA App
i just downloaded the terminal emulator onto my evo but when i type the first cmd "su" it says permission denied. please tell me how do i get passed that.
ro2themax said:
i just downloaded the terminal emulator onto my evo but when i type the first cmd "su" it says permission denied. please tell me how do i get passed that.
Click to expand...
Click to collapse
Root your phone..
i jsut use rom manager. I am to lazy to do everything else currently rom manager has the latest amon ra you can tell it to flash as an "alternative" recovery. takes 2 seconds and no typing out "long" commands in terminal.
i was under the impression i was rooted...i did the OTA update to 2.2 then used the method to root that came out a week ago using unrevoked3 and unrevoked forever. but instead of going back to a rooted 2.2 i stayed on a rooted 2.1.
ro2themax said:
i was under the impression i was rooted...i did the OTA update to 2.2 then used the method to root that came out a week ago using unrevoked3 and unrevoked forever. but instead of going back to a rooted 2.2 i stayed on a rooted 2.1.
Click to expand...
Click to collapse
Huh, that's weird. What rom are you using?
If you're using a rooted rom then you should be getting a # when you type "su" into the terminal..
Do you have the SU app installed? Did you get an SU Permission request when you opened the terminal for the first time? If so, did you grant the terminal emulator SU permission?
im using a stock 2.1 rom and i do have superuser permissions installed. i also have setcpu for root users installed and "su" grants "setcpu" permission.
i also forgot to mention that i also put a "netarchy kernal" on their also which appears to me, works as it said. right now if i want to go into recovery it goes through clockwork, but i want to get amon ra's recovery on there instead.
ro2themax said:
im using a stock 2.1 rom and i do have superuser permissions installed. i also have setcpu for root users installed and "su" grants "setcpu" permission.
Click to expand...
Click to collapse
hmm.. which 2.1 stock? Was it a rooted stock (with busybox and su already in there) or did you install the su app?
Although sounds like it already had busybox if setcpu is getting permission.
If you are near your computer see if you can get a # using the adb shell. I'm a little stumped here..
the 2.1 stock came with the "su" already. i just posted a quick update on the my previous post that i flashed a netarchy kernal on my evo also. i dont know if that helps but i just forgot to mention it...
please bare with me, im by my computer and to go into adb shell do i need to plug my evo in as charge only and open a cmd from android tools to see if i get # ???
Related
I've tried reading through the thread many times already.... Renaming the file, moving it to different locations, going through the terminal. Yet I'm still not able to install the 1.8 recovery. I have no idea how to use the abd shell or what ever it is, I don't even think I have it. Could someone upload a flashable zip with it? Or maybe give me some step by step for it cause I'm lost here and want to flash Vael's rom.
1) Put the recovery image on the root of your sdcard
2) Open a terminal emulator on your phone
3) Type "su" and hit enter
4) Type flash_image recovery /sdcard/<name_of_the_recovery_image>.img and hit enter
Voila! You just updated your recovery image
even easier..
download rom manager from the market, you must be rooted to use, hit flash recovery, then it will flash clockwork recovery, once thats done, scroll to the bottom on the main page of rom manager, then select flash alternate recovery, and it will flash amon 1.8.0. This is the easiest way to do it
It says I don't have permission everytime I try the terminal.
On the plus side the Rom Manager solution was simple and effective. Though I would still like to know why I don't have permission through the terminal and a little more about the problem I was having. It would be nice know what exactly is going on and how to fix these little problems.
crimeslunk said:
It says I don't have permission everytime I try the terminal.
Click to expand...
Click to collapse
Try re-installing the SU app from the market. I've had trouble with it being bundled in roms before, reinstalling it has always fixed my su permission issues.
Reboot your phone after you get the SU app reinstalled.
Maybe this could help for you:
http://forum.xda-developers.com/showthread.php?t=764062&highlight=amon_RA
Okay, I am getting ready to root my phone tonight...
As far as all that - I think I got all that covered.
As far as flashing a recovery - I want to use amon-ra's - RA-evo-v1.8.0 found here - http://forum.xda-developers.com/showthread.php?t=705026
In that post it gives two differant ways to flash the recovery:
via fastboot
Code:
Copy recovery-RA-evo-v1.8.0.img to a location where fastboot can find it.
Boot your phone into fastboot mode
fastboot devices(press enter) (to make sure that fastboot "sees" your phone)
fastboot flash recovery recovery-RA-evo-v1.8.0.img(press enter)
via terminal app or adb => Make sure your rom contains flash_image!!
Code:
Copy recovery-RA-evo-v1.8.0.img to the root of your sdcard
start the terminal app or launch adb
su(press enter)
flash_image recovery /sdcard/recovery-RA-evo-v1.8.0.img(press enter)
reboot recovery(press enter)
My questions are:
first of all - what is "Fastboot"?? I mean is it an application that I can download and install it this way?
second of all - what is a "terminal app"
&
third - what is "adb"?
I keep hearing the term "shell", is a "shell" the same as windows command prompt? Or is that "adb"?
I know these are probably stupid questions for most, but I like to have every thing ready to go before I tackle projects...
Any guidance would be greatly appriciated!!
J
Another option is to install ROM manager and install AmonRa that way. (think you have to pay) Open it and click on Flash Alternate Recovery.
Terminal app is just an application providing terminal-like access to the system. Imagine the command prompt on a Windows system, but understand your phone is running Linux underneath the hood so the commands are different.
adb likely is an acronym for something along the lines of debugger or something. It essentially allows you to communicate with your phone from your computer. So, go to a command prompt and you can enter commands to execute on your phone via adb. (shell = command prompt, adb runs within the shell/command prompt)
You're right in trying to find out as much as possible before tackling something like this.
terrel_b said:
Another option is to install ROM manager and install AmonRa that way. (think you have to pay) Open it and click on Flash Alternate Recovery.
Terminal app is just an application providing terminal-like access to the system. Imagine the command prompt on a Windows system, but understand your phone is running Linux underneath the hood so the commands are different.
adb likely is an acronym for something along the lines of debugger or something. It essentially allows you to communicate with your phone from your computer. So, go to a command prompt and you can enter commands to execute on your phone via adb. (shell = command prompt, adb runs within the shell/command prompt)
You're right in trying to find out as much as possible before tackling something like this.
Click to expand...
Click to collapse
Great, thanks for the response! That helps alot - I searched around a little while waiting for a reply and still didnt clear any thing up. I have already DL'd ROM Manager and I will just use that... I just like to have as much info as I can...
Thank you!
J
How are you going to root? if you are going to use unrevoked (doesn't work with hboot2.02) just open unrevoked without the phone connected and then point it to the amon-ra recovery.img you downloaded, up at the top its under file dropdown or somewhere up there then unrevoked will flash ra for you automatically
fastboot is an option under HBOOT(power of your phone power on pressing power and volume down it is the first option)
terminal app is an app that is like the command prompt in windows on your phone a good one is terminal emulator
adb is is Android debug bridge like stated above. it is for people that like to use the cmd(command prompt) on your computer to do things with your phone like pulling apps off your phone, pushing them on your phone, and other like this most of this can be done using root explorer to place the flies or making a flashable zip. another thing adb is used for is getting your phone out of boot loops that you cant any other way. never had to do this so dont know how. i think adb and adb shell are basically the same thing not 100 on that one. here are some likes about adb for you
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
http://www.gadgetsdna.com/android-terminal-adb-shell-command-list/1168/
as for using terrel_b's suggestion this is a good suggestion. using rom manager you can flash your recovery this way it is very easy way to do this it is free there is a paid version of rom manager it is for using extra things on clockwork recovery, so basically the only thing you will use rom manager for, if you decide to use it, is flashinf your recovery unless you use clockwork. the reason clockwork is not used more is that there are questions if it wipes everything properly and if something is not wiped right it can cause lots of problems. of and just in case you are wonndering rom manager is an app you can get off the market.
hope this helps and if you need anything else ask
ifly4vamerica said:
How are you going to root? if you are going to use unrevoked (doesn't work with hboot2.02) just open unrevoked without the phone connected and then point it to the amon-ra recovery.img you downloaded, up at the top its under file dropdown or somewhere up there then unrevoked will flash ra for you automatically
Click to expand...
Click to collapse
Im using unrevoked... I am still running hboot 0.97.0000... thanks for the input, I appriciate it!!
J
roscoenr said:
fastboot is an option under HBOOT(power of your phone power on pressing power and volume down it is the first option)
terminal app is an app that is like the command prompt in windows on your phone a good one is terminal emulator
adb is is Android debug bridge like stated above. it is for people that like to use the cmd(command prompt) on your computer to do things with your phone like pulling apps off your phone, pushing them on your phone, and other like this most of this can be done using root explorer to place the flies or making a flashable zip. another thing adb is used for is getting your phone out of boot loops that you cant any other way. never had to do this so dont know how. i think adb and adb shell are basically the same thing not 100 on that one. here are some likes about adb for you
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
http://www.gadgetsdna.com/android-terminal-adb-shell-command-list/1168/
as for using terrel_b's suggestion this is a good suggestion. using rom manager you can flash your recovery this way it is very easy way to do this it is free there is a paid version of rom manager it is for using extra things on clockwork recovery, so basically the only thing you will use rom manager for, if you decide to use it, is flashinf your recovery unless you use clockwork. the reason clockwork is not used more is that there are questions if it wipes everything properly and if something is not wiped right it can cause lots of problems. of and just in case you are wonndering rom manager is an app you can get off the market.
hope this helps and if you need anything else ask
Click to expand...
Click to collapse
Very helpful info - thanks!! I have already DL'd ROM Manger Pro...
Okay - another question, can i place the amon-ra recovery on the SD card BEFORE i root the phone or should I do that AFTER I root the phone? Just curious, I dont even know if it matters one way or the other... Just want to be sure before I do it...
Okay - I ROOTed using unrEVOked3.... Success! I do have a question though - I clicked on the superuser icon and nothing comes up?!? Is that right? I thought it was an app that gave you all kinds of stuff?? I guess I could have misunderstood the purpose of "superuser" - Also, After ROOT, I have not installed a new ROM yet - does the 4G still work with the stock ROM? I clicked the 4G button and it still says 3G... anyway Im gonna flash the Amon-Ra recovery now...
JayStation3 said:
Okay - I ROOTed using unrEVOked3.... Success! I do have a question though - I clicked on the superuser icon and nothing comes up?!? Is that right? I thought it was an app that gave you all kinds of stuff?? I guess I could have misunderstood the purpose of "superuser" - Also, After ROOT, I have not installed a new ROM yet - does the 4G still work with the stock ROM? I clicked the 4G button and it still says 3G... anyway Im gonna flash the Amon-Ra recovery now...
Click to expand...
Click to collapse
Well superuser gives root permissions to new applications loaded on a rooted android 2.2 platform phone.
To load a new ROM, flash via first on recovery.
Hope that helps, sorry I was being in a bit of short there eariler but I edited my post right I hope, others can check too.
alekosy said:
Well superuser gives root permissions to new applications loaded on a rooted android 2.2 platform phone.
To load a new ROM, flash via first on recovery.
Hope that helps, sorry I was being in a bit of short there eariler but I edited my post right I hope, others can check too.
Click to expand...
Click to collapse
No - you were very helpful... I got it ROOTed, now I just want to change my recovery to amon-ra so I can use my 4G...
4G is not working now - so im assuming I need to flash a new recovery... I heard amon-ra does the trick...
JayStation3 said:
No - you were very helpful... I got it ROOTed, now I just want to change my recovery to amon-ra so I can use my 4G...
4G is not working now - so im assuming I need to flash a new recovery... I heard amon-ra does the trick...
Click to expand...
Click to collapse
Edited: http://forum.xda-developers.com/showthread.php?t=715525
see if that helps.
OR
Read this http://forum.xda-developers.com/showthread.php?t=705026
alekosy said:
Edited: http://forum.xda-developers.com/showthread.php?t=715525
see if that helps.
OR
Read this http://forum.xda-developers.com/showthread.php?t=705026
Click to expand...
Click to collapse
Everything is there, pretty much solid on the information. I hope it works out for you, if not don't RUSH and take your sweet old time browsing the forums for help. GL
Strange the wimax should still work did you reboot and try 4g again? Unrevoked isn't known to break wimax
sent from my EVO at the edge of hell
alekosy said:
Edited: http://forum.xda-developers.com/showthread.php?t=715525
see if that helps.
OR
Read this http://forum.xda-developers.com/showthread.php?t=705026
Click to expand...
Click to collapse
cool, I will read them and figure it all out... thanks for the info... i flashed amon ra last night, did a back up w/ TB... did a NAND back up through the recovery of the phone... Im just a little confused on the differant recoveries...
Jbcarrera said:
Strange the wimax should still work did you reboot and try 4g again? Unrevoked isn't known to break wimax
sent from my EVO at the edge of hell
Click to expand...
Click to collapse
I thought I did reboot at least once, when I was preforming the NAND back up - but Im rebooting now and I will test it out again...
I do not have great 4G signal here at my house, so that may be it as well... I will mess with it and see whats up through out the day and let you know tonight...
I have noticed that my touch screen doesnt seem as responsive as it was and the phone in general is kind of glichy...
Ok, my 4G is still working... I must not have had a strong enuf signal at my house for it to kick in... No I'm having problems getting tether to work... I started a new thread on that one though...
Sent from the MATRIX... while plugged into my EVO... using the XDA app... from a galaxy far-far away.......
I followed all the steps from the Wiki: (http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD).
Now the problem is when I go to verify the root. On the Wiki, where it says run "su' in computer ADB shell, I get access denied. When I run "./gfree_verify" in computer ADB shell, I get
Error: Could not open modem device; /dev/****
Error: Verify could not initialize device
But in my apps on the G2 I see an icon for superuser permissions. So did the root take or not?
Thanks for any help, new to Android.
Go in to terminal on your phone and type SU
After pressing enter if it says permissions denied, you have no root, if a Su message pops up click allow... that means you have root
Edit: I think you have no root
MacaronyMax said:
Go in to terminal on your phone and type SU
After pressing enter if it says permissions denied, you have no root, if a Su message pops up click allow... that means you have root
Edit: I think you have no root
Click to expand...
Click to collapse
After typing Su in the terminal on the phone, I get a message pop that says either allow or deny. I click allow and it gives me root permission.
Then it`s OK!
After reboot/or try again,open terminal emulator on your phone and type "su".
If you get a superuser prompt, you have root!
After "su" you should see a line with "#".
Ganii said:
Then it`s OK!
After reboot/or try again,open terminal emulator on your phone and type "su".
If you get a superuser prompt, you have root!
After "su" you should see a line with "#".
Click to expand...
Click to collapse
After a reboot (two actually) after I enter su into terminal I dont get the popup anymore asking allow or deny. I get "#." I actually went through the whole rooting Wiki steps again, to root the phone (just cause I wasn't sure if I was rooted). Same results, the gfree-verfiy doesnt work and neither does the "older" method. But I get "#" after entering su in terminal on G2.
I also installed Rom Manager, I clicked Flash ClockworkMod Recovery and then chose Backup Current ROM. It asked for superuser permissions and I allowed it. It rebooted the phone and went to a ClockworkMod Recovery screen where I selected reboot device. Does this mean I backed up my current Tmobile ROM?
Another question, is it okay to delete the files I had to push to /data/local to root? How would I delete them?
I want to really thank you guys for all the help.
boost3d23 said:
After a reboot (two actually) after I enter su into terminal I dont get the popup anymore asking allow or deny. I get "#." I actually went through the whole rooting Wiki steps again, to root the phone (just cause I wasn't sure if I was rooted). Same results, the gfree-verfiy doesnt work and neither does the "older" method. But I get "#" after entering su in terminal on G2.
I also installed Rom Manager, I clicked Flash ClockworkMod Recovery and then chose Backup Current ROM. It asked for superuser permissions and I allowed it. It rebooted the phone and went to a ClockworkMod Recovery screen where I selected reboot device. Does this mean I backed up my current Tmobile ROM?
Another question, is it okay to delete the files I had to push to /data/local to root? How would I delete them?
I want to really thank you guys for all the help.
Click to expand...
Click to collapse
# sign means your rooted or have su access.
Go under manage and restore backups in rom manager, you should have a copy of the rom you just backed up. Unless you renamed the back up its probably a date.
Its ok to delete the files you pushed to data/local use a file manager like root explorer.
Sent from my HTC Vision using XDA App
After a reboot (two actually) after I enter su into terminal I dont get the popup anymore asking allow or deny. I get "#." I actually went through the whole rooting Wiki steps again. Same results, the gfree-verfiy doesnt work and neither does the "older" method. But I get "#" after entering su in terminal on G2.
Click to expand...
Click to collapse
You get "#" then it`s right,the app don`t ask you again about allow or deny!
About gfree-verify,I don`t know.Maybe something wrong with Script
or you have done something wrong with the commands!
I also installed Rom Manager, I clicked Flash ClockworkMod Recovery and then chose Backup Current ROM. It asked for superuser permissions and I allowed it. It rebooted the phone and went to a ClockworkMod Recovery screen where I selected reboot device. Does this mean I backed up my current Tmobile ROM?
Click to expand...
Click to collapse
If you choose "Backup ROM" you phone boot into Recovery,then you have
to choose "backup/restore option to backup you current ROM.
Otherwise you don`t have a backup
Again thanks guys.
Now i downloaded Astro and ES file Managers but I cant find the files. Do I need specifically need root manager? Im guessing the ones I downloaded cant access root files.
boost3d23 said:
Again thanks guys.
Now i downloaded Astro and ES file Managers but I cant find the files. Do I need specifically need root manager? Im guessing the ones I downloaded cant access root files.
Click to expand...
Click to collapse
I use Root Explorer or SUFBS (Super User File Manager and Terminal).
boost3d23 said:
Now i downloaded Astro and ES file Managers but I cant find the files. Do I need specifically need root manager? Im guessing the ones I downloaded cant access root files.
Click to expand...
Click to collapse
You should really have posted up in the existing thread about gfree on this, or otherwise in the Q&A forum
But anyway, yes, those file managers don't handle root. Well, ES does have an option to do so, but it doesn't work on the Vision. So you'll need a root-capable file manager, as joemm said.
On the backup, that sounds a bit odd, but you'll know that it's doing a backup because it'll take a while. You'll get a different screen where it shows you it's backup up the main phone partitions, and even which file is being backed up. When it's done, make sure you copy this backup somewhere else, like your PC (i.e. so you don't just have a single copy, in case something happens to it - e.g. corrupt SD card).
Thanks to everyone who provided insight. I had the same problem and was worried about bricking my phone, but this worked and I'm happily rooted!
Ok so I started the method previously posted before it was linked back to nbecthers method because it supposedly works but I flashed the clockwork it wouldn't flash my custom rom (CM Mod 6.1.1) and returned me to the stock then I tried the correct method and it won't let me adb push flash_img/data/local or mtg0.img to data/local either so I can't cd, chmod the commands to then boot into the stock recovery and flash esprimg.zip followed by clockwork(update.zip cause its already applied but NAND protection stops it from working I guess) because I no longer have a stock recovery to exploit or whatever I have clockwork I have since used androot and root explorer for root used to copy flash_image and mtg0.img to data/local and exploid is in the sqlite_stmt_journals as it should be... So can I run the commands to run flash image and mtg0.img and exploid again from and android shell off my phone with su permissions from androot temp root and then flash a custom image or am a screwed? Or should I run the exploid command toggle wifi and then the flash/mtg commands from android shell or what cause I'm away from a pc and I need to do this to my phone plus it goes to the triangle screen and nothing works I gotta pull the battery...
Honestly, start from ground zero of the updated for 12/30 root method and you will be just fine. Just messing around earlier today I unrooted and rerooted my phone a few times. Stick with eugene373's method from step one on and things should work fine.
Sent from my T-Mobile myTouch 3G Slide using XDA App
I recommend using the one involving the exploid file, it's very simple.
NVM!!! I Stumbled Upon My Own NO PC QUICK ROOT Method!
aaldiar said:
Honestly, start from ground zero of the updated for 12/30 root method and you will be just fine. Just messing around earlier today I unrooted and rerooted my phone a few times. Stick with eugene373's method from step one on and things should work fine.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
Ok so in my never ending struggle against the Evil Eclair/T-Mo/HTC NAND Protection and the Futility of Trying to flash a ROM With the "Supposed AndRoot QuIck Root Method" As well as a fine point from Nbetcher that the Engineering build must be flashed because Android has NAND protection while running. I have devised my own "No PC ROOT Method!!!"
Required Files (Tested For MT3G SLIDE Latest OTA Unrooted Stock)
1.Download Androot From Location of Choosing (I'm Using Version 1.6.2)
2.Download ESPRIMG.zip (ENG build)
3.Download SlideEng-Package.zip
4.Download Custom Rom Of Your Choosing(Mine Is CM 6.1.1 Stable)
5.Download Android Terminal Emulator(From Market)
6.Download Root Explorer Android (Requires Root) (From Market Or Some Place Online)
7.Download File Explorer (Dev:Adao Team)(From Android Market)
8.Download Latest Clockwork Recovery(I Used 2.5.0.1)
Please Not I Am NOT The DEV Behind these Apps nor am I Resposible For Any Damages You May Incur To Your Device or Warranty by using this Method! Also Before anyone says I repped someone off remeber I accidentally discovered this using 2 failed methods because they essentially cancel each other out.(The Latter Nbetchers works just not after the AndRoot One)!!!
So...
1st Download/Install all needed files from market( File Manager Android Terminal Emulator)
2nd Download all zip images, Recoveries, Roms, apps from phone browser Directly To SD ROOT(Google em until I get links up on Dev Forum)
3rd. Unzip SlideEng-Package.zip To Root using File Manager or Other Zip Program for android(Andro-Zip Works Well)
4th Change Name of Clockwork to Update.zip(Case Sensative)
5th Install AndRoot And Run Root Me With Install Su & Temp Root/Unroot After Reboot Selected(Or Else You Will Boot Loop)
6th Install And Run Root Explorer then Copy and paste flash_img and mtd0.img to /data/local on android device by multi-select copy then RM R/W in program in upper left on data local folder.
7th IMPORTANT!!! Long Press and hold each copied file and set permissions to allow read and write on both user and the lowest option (I Think Dev or system)
8th Run Android Terminal Emulator and type the following commands verbatim spaces included Pressing enter after each line($ n # will be there provided you follwed all steps if not go back to androot and root again):
$ su
# cd /data/local
# chmod 04755 flash_image
# ./flash_image misc mtd0.img
Now power off and reboot using VOL-DOWN + POWER
It'll reboot into the HBoot Screen and ask if you want to Check ESPRIMG.zip after Verifying it will ask you to flash Select Yes (VOL-UP) And Wait DO NOT POWER DOWN OR TAKE OUT BATTERY!!!
Once its Completed it will ask you to Reboot select no Instead and Go To Recovery
Now Select APPLY Update.zip to flash CLOCKWORK RECOVERY YAY!!! :-D Now We Can Flash a Custom Rom With Root and Even Go As Far As S-OFF!!! But Please Be Sure Its Already On Your Micro SD...
Select Wipe Data Factory Reset by Scrolling with VOL- UP/DOWN or Track Pad and Use Power/Trackpad TO Select.
Now Use Install Zip from SD Card to Install Custom Rom(Flash GApps Second if downloaded and desired if using CM Mod 6.1.1) Now Reboot And Enjoy!!! If you Wanna Flash Anything Else Use Rom Manager From Market and Som Custom Roms to Boot into Clockwork!!! Thanks to all the Devs and their tools and immense knowledge for Making this Possible! Thanks To All The ROM Chefs Too!!!
Ok just follow step by step and even you can do this...
Download the .img file from here:
http://www.megaupload.com/?d=T4DAGUR8
Put that on file(Yes The One You Just Downloaded) on the root of your SD Card. open term emulator And type:
su
Then push enter then type:
flash_image recovery /sdcard/recovery.img
Then type Enter.
For adb
Make sure you android sdk folder is in you C: and its named
AndroidSDK
Next open cmd the type: ( AFTER cd\ MAKE SURE YOU PUSH ENTER AFTER EVERY LINE AND SPACE BEFOR YOU TYPE A NEW LINE)
cd\
cd AndroidSDK\tools\
adb reboot bootloader
fastboot flash recovery recovery.img...
NOW THAT WASN'T ROCKET SCIENCE WAS IT!
RECORCES:
http://gridlock.euroskank.com/glacier/recoveries/
Jaywan said:
Ok just follow step by step and even you can do this...
Download the .img file from here:
http://www.megaupload.com/?d=T4DAGUR8
Put that on file(Yes The One You Just Downloaded) on the root of your SD Card. open term emulator And type:
su
Then push enter then type:
flash_image recovery /sdcard/recovery.img
Then type Enter.
For adb
Make sure you android sdk folder is in you C: and its named
AndroidSDK
Next open cmd the type: ( AFTER cd\ MAKE SURE YOU PUSH ENTER AFTER EVERY LINE AND SPACE BEFOR YOU TYPE A NEW LINE)
cd\
cd AndroidSDK\tools\
adb reboot bootloader
fastboot flash recovery recovery.img...
NOW THAT WASN'T ROCKET SCIENCE WAS IT!
RECORCES:
http://gridlock.euroskank.com/glacier/recoveries/
Click to expand...
Click to collapse
That did not work. error recovery.img doesnt exist. when using adb. and flash_image not found when using emu.
I have been flashing recoveries since the G1 and im to stubborn to ask for help, but i cannot get CW3 to flash. Maybe im getting old lol. And i have tried both these methods.
ive tried multiple times..
for terminal emulator after i put in the commands it doesnt do anything. (is that what its supposed to do?) it shows like this
su
flash_image recovery /sdcard/recovery.img (ive renamed file to recovery.img)
then when i goto check Rom manager at the top it says rom manger premium v3.0.0.2
Flash clockwork mod recovery
current recovery:2.5.1.2
latest recovery:2.5.1.2
by the way im currently on the rom
CyanogenMod for Glacier (myTouch 4G) :: V6.1.2-RC2 (12/21/2010, #2)
This is what I got
$ su
# flash_image recovery/sdcard/recovery.img
usage: flash_image partition file.img
#
nyctrini3 said:
This is what I got
$ su
# flash_image recovery/sdcard/recovery.img
usage: flash_image partition file.img
#
Click to expand...
Click to collapse
You're missing a space between the "recovery" and "/sdcard...."
Psyclism said:
You're missing a space between the "recovery" and "/sdcard...."
Click to expand...
Click to collapse
When I include the space there is no action so what is my next step I rebooted into recovery n I'm still on 2512
mightywonton said:
ive tried multiple times..
for terminal emulator after i put in the commands it doesnt do anything. (is that what its supposed to do?) it shows like this
su
flash_image recovery /sdcard/recovery.img (ive renamed file to recovery.img)
then when i goto check Rom manager at the top it says rom manger premium v3.0.0.2
Flash clockwork mod recovery
current recovery:2.5.1.2
latest recovery:2.5.1.2
Click to expand...
Click to collapse
Same thing here man where is Amon_RA recovery lol
That is a CW 3 Recovery for Gingerbread. ROM Manager hasn't been updated so even if you have the correct recovery, ROM manager will still say 2.5.x.x
Reboot into recovery to see if it actually worked. The text will be yellow in 3.x.x.x or blue in 2.5.x.x
If you use terminal emulator it will give you a blank line after you flash_image.
Sent from my HTC Glacier using XDA App
joeyklatzko said:
That is a CW 3 Recovery for Gingerbread. ROM Manager hasn't been updated so even if you have the correct recovery, ROM manager will still say 2.5.x.x
Reboot into recovery to see if it actually worked. The text will be yellow in 3.x.x.x or blue in 2.5.x.x
If you use terminal emulator it will give you a blank line after you flash_image.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
In terminal after I typed the command the next line is blank rebooted into recovery n it said recovery 2512 so what should I do next actually its blue in 2512 so do that mean it worked?
Has anyone here having trouble update their SDK yet? You need to update to GB 2.3
I finally got it working thanks everyone for the help
does flashing cw3 through terminal emulator work?
flash_image not found???
I'm getting this message when attempting to flash the new clockwork recovery image.
Flash_image: not found
Can any of you guys tell me what's going wrong here. I'm using terminal commands and not getting anywhere.
Thanks.
JPongco said:
I'm getting this message when attempting to flash the new clockwork recovery image.
Flash_image: not found
Can any of you guys tell me what's going wrong here. I'm using terminal commands and not getting anywhere.
Thanks.
Click to expand...
Click to collapse
nulights said:
does flashing cw3 through terminal emulator work?
Click to expand...
Click to collapse
Flashing through terminal works
Dwnld file from op it should already say recovery.img
move it to the root of your SD I use Linda file. Next open emulator
type :su then hit enter
type : flash_image recovery /sdcard/recovery.img
Type: enter
you will see absolutely nothing
that's ok just type
reboot recovery if you see cwm in yellow or gold honeycomb color
you're done if not keep trying
That's what I did
JPongco said:
I'm getting this message when attempting to flash the new clockwork recovery image.
Flash_image: not found
Can any of you guys tell me what's going wrong here. I'm using terminal commands and not getting anywhere.
Thanks.
Click to expand...
Click to collapse
Sounds like the file isn't where you're telling it. Make sure the recovery you downloaded is named exactly recovery.img if you are writing:
flash_image recovery /sdcard/recovery.img
Sent from my HTC Glacier using XDA App
flash_image not found.
what is wrong??
flash_image: not found
I'm really not sure what's going on with the emulator but it seems like this command is not part of the script for some reason...
I tried the same commands through adb shell and got the same response "flash_image: not found"
the adb method isn't exactly working out for me although I am persistent. I'm typing the command line EXACTLY and getting this response in the emulator, that's for sure.
finlly flashed cwm3 but everytime try to flash a rom says intallation aborted?
please help: