Related
Mod Edit: Redirect Removed
Reserved in case it's needed at some point.
Thank you for your work! Its greatly appreciated !
Sent from my HTC Vision using XDA App
I have the pershoot v1.2 running on euro DZ with stock sense since yesterday.
I can confirm : no issues whatsoever.
WiFi, bluetooth, FM-radio, GPS, Overclocking to > 1.5GHz all working perfect.
Are these kernels compatible with the US T-mobile G2 Stock ROM? Sorry i just need to clear it out of my way. thank you
Which kernel is included with the Virtuous 0.8 by default?
sonofabit said:
Which kernel is included with the Virtuous 0.8 by default?
Click to expand...
Click to collapse
G2 / Vision Changlog
1. Version 0.8.0
4. Default kernel switched to Pershoot (based off latest sources from 12/13/2010). (Thanks: Pershoot, Cyanogen Project).
Click to expand...
Click to collapse
thanks for the hard work!
rmk40 said:
So if you like the kernels and are planning to donate, please make sure you donate to them and not us. The work we've done and continue to do to assure Sense/HTC compatibility is minuscule in comparison to the upstream work by the actual maintainers.
Click to expand...
Click to collapse
I don't use Sense myself, but I think it's important that the Virtuous team is recognized for all THEIR hardwork. As humble as you are in your post, you & your team deserve recognition for your efforts too.
Your contributions are definitely not without merit and appreciated by many, many people. You guys are important in your own way for making the community (G2/DZ & beyond) what it is, so thank YOU for your hard work.
BlueTooth won't turn on for G2 Stock ROM with both Pershoot and Cyanogen Kernels
Thanks for the work though.
androidtoy09 said:
Are these kernels compatible with the US T-mobile G2 Stock ROM? Sorry i just need to clear it out of my way. thank you
Click to expand...
Click to collapse
No. Just Htc sense-based roms.
Oh wow, thank you so much for this.
Gonna send a donation your way.
PanCubano said:
No. Just Htc sense-based roms.
Click to expand...
Click to collapse
oooh man, that's too bad. So, no love for Stock G2 Rom than. Oh wel,, I might as well wait for Bingerbread.
androidtoy09 said:
oooh man, that's too bad. So, no love for Stock G2 Rom than. Oh wel,, I might as well wait for Bingerbread.
Click to expand...
Click to collapse
Deleting my post. I believe the ramdisk needs to be different.
Hi.
Excuse my ignorance, but trying to find out how to update stock kernel to this.
Tried searching, but rather new to Android and there seems to be a lot of varuois advise.
Am I to understand that all I need to do is download for example the pershot kernel, put it on my SD and make a fastboot update? Since it contains a "boot.img"
Or is ADB involved?
Simply put, how would I upgrade my "old" stock kernel?
And before upgrading, how would I go ahead and backup my old. Nandroid?
Thanks for your time.
If your sig is current, then your first step should be to S-Off. Check one of the stickies.
Then the easiest way to go about updating the Kernel/doing a backup would be to grab Rom Manager off the Market and flashing ClockworkMod.
Thanks alot for the kernals everything works on desire z fine fm radio etc..
the only problem i am having is the phone freezes if i set the max fre over 1094 mhz on set cpu it allows over clocking to over 1400 mhz right? well i am a proper noob though so maybe i am doing something wrong? i need to change a setting perhaps? or maybe this kernal is not for overclocking ?
thanks
or maybe i am just unlucky and 1094 mhz is the max my phones cpu can handle since every cpu is unique?
Random black-screen on wake-up
Tried both 1.2 and 1.3, same problem.
The issue is: When I wake up my phone from sleeping( either using Power Button or D-Pad), I have random chance to get a black screen. It's special, unlike those "freeze black-screen", the "home,MENU,Back,Search" buttons below the screen light up normally,open the keyboard and the backlight will turn on too ,but not the screen, it just remain black.
When I press the PowerButton again, the screen light up for about 0.1s (I can see the lock screen) then back to sleep.
Sometimes I have to press the Powerbutton several times get the screen on. but sometimes it works just fine.
I have no problem with the "Unmodified kernel" from ROM Manager, but when using these two kernels, it happens again.
Is there any solution or similar case?
Just installed the CM kernel on my DZ with stock sense rom. Everything seems to work perfectly. Setcpu works great with it. I can OC to 1.5ghz with small steps.
What are the difference in between the kernels??
Using 1.3 atm and no problems at all whatsoever. However I would like to know the differences in between kernels. Does anyone know?
Thanks in advance
Sent from my HTC Vision using XDA App
I can confirm this black screen on wake up as reported by jzhyok while I am test running right now the CM 1.3 kernel on my german DZ with unmodified Sense ROM, perm root, s-off.
I used setcpu with 1.5ghz and 1.2ghz with same results, just in case this could make a difference.
One more thing. My DZ instantly froze when I changed the governor from on demand to smartass in setcpu while I was at 1.5ghz with this CM 1.3 kernel, so I removed battery and now stay with the on demand governor.
Any fix for this anoying black screen wake up problem and any hint for the smartass governor? Which governor would be better, on demand or smartass?
Sent from my HTC Vision using XDA App
Hey I wanted to ask the regular flashoholics that which sense hd Rom is the moat stable for daily use ....
The emphasis is on stability . That is running day to day smoothly without glitches and without requiring resets and the basics of phone being rock solid . That is phone call , sms and alarms....I can live with issues like no 720p recording .....
Thank you in advance
Sent from my HTC Desire using XDA App
Hi
RCmixHD V0.14of is absolutely superb. Its fast, stable, silky smooth, good battery. However, I did change the kernel from the one that comes with the ROM. The ROM comes with ziggies kernel, but I flashed Richard Trips very excellent V5e_1113mhz no audiomod svs kernel. It is a great kernel and integrates well with this HD ROM. I use setCPU also but without profiles. I just set it to minimum 245mhz and 1113mhz max using the smartass governor. All this fits together very well and my phone has no problems at all. Current widget shows between 2 and 6 milliamps when on standby.
I also have an app that alows to turn the screen off immediately with the touch of an icon. This saves a lot of battery time waiting for the screen to timeout.
Sorry, I have rambled on a bit!
btw. there are 2 versions of this ROM. The apps to SD version (my version) and the data to SD version which is version 0.14b (mine is v0.14of). Make sure you use the of version as even the developer Robocik says this is the most stable and fast version. Read throught the ROM's thread on XDA before taking the plunge. Good luck.
carlos67 said:
Hi
RCmixHD V0.14of is absolutely superb. Its fast, stable, silky smooth, good battery. However, I did change the kernel from the one that comes with the ROM. The ROM comes with ziggies kernel, but I flashed Richard Trips very excellent V5e_1113mhz no audiomod svs kernel. It is a great kernel and integrates well with this HD ROM. I use setCPU also but without profiles. I just set it to minimum 245mhz and 1113mhz max using the smartass governor. All this fits together very well and my phone has no problems at all. Current widget shows between 2 and 6 milliamps when on standby.
I also have an app that alows to turn the screen off immediately with the touch of an icon. This saves a lot of battery time waiting for the screen to timeout.
Sorry, I have rambled on a bit!
btw. there are 2 versions of this ROM. The apps to SD version (my version) and the data to SD version which is version 0.14b (mine is v0.14of). Make sure you use the of version as even the developer Robocik says this is the most stable and fast version. Read throught the ROM's thread on XDA before taking the plunge. Good luck.
Click to expand...
Click to collapse
Thanks a lot for the generous lengthy reply I was actually looking for a complete breakdown of the Rom with analysis rather than just a short answer .... so thank you very much . I'm on leeDroid 2.3b a2sd version and I am gonna nandroid backup it now and try the Rom which you mentioned
Cheers mate ....
Sent from my HTC Desire using XDA App
Make sure you wipe everything first including the dalvik cache. To install this ROM you first need to create an ext partition on your SD card. I used a 1GB Ext2 partition created with partition wizard home (free) edition. After you have done this make sure you set both (fat32 and ext2) to primary partition types, not logical. Otherwise you will get an error when trying to flash the ROM. To do this simply right click on the partition in P/magic and select "make primary"
Also, make sure you have debugging enabled on the phone and connect it to the PC with usb lead in charge only mode. This way there's no risk of power failure whilst flashing.
After flashing, it will take a while to boot-up. Just be patient and let it do its thing. Like I said read through Robociks thread first. I did and had no probs.
One other thing, Robocik is about to release an updated version v0.15 in next day or 2 so you may want to wait for this. However v0.14OF is awesome.
Hello all, I installed rmk and Flemmard, Diamondback, Cappychimp, eViL D:, siulimagic, rafyvitto, and 911Sniper Rom of Virtuous Fusion. Well I could not post anything on that thread because they consider me a noob. So i decided to help those who would like to overclock their G2, and possibly Desire Z, but as i do not have one and did not test it, i cannot confirm it.
So anyways i downloaded: boot-2.6.32.39-amazinglarry-042611.zip ,from another thread which allows the G2 to be overclocked to 1.708 MHz. Since then the Sense 3.0 exp. rom has been blazing fast. it was great before, but amazing now! only issue is its broken the camera and camcorder. So if you cant live without those, then dont try this!
Also just as a precaution, i am not responsible if your device blows up, attacks you or gets bricked =) Just thought i could help those who keep asking for an OC kernel.
Oh and btw, read the article http://forum.xda-developers.com/showthread.php?t=1052647 to set the profiles right, you need to have your screenoff setting at 245 min and 806 max, the reason is because the device can freeze when jumping from 245 min to 1708 max.
My Install method
1)Download OC Kernal from above
2)Flash with ROM Manager and ClockworkMod Recovery 3.0.2.4
3)Dont wipe dalvik cache or anything!
4)Device resets and you now have an Overclocked G2
5)Be sure to set your profiles correctly with SetCPU or whatever else you use
6)Enjoy Blazing fast Rosie =)
If anyone can help fix the cam and camcorder after applying this OC, Please let me and everyone else know! I will keep working on it myself and will report back with what I come up with.
So good luck to everyone, hope this helps! =)
Donations accepted never required =D
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=Z7AK4QW2PSH3E
Amero07 said:
Hello all, I installed rmk and Flemmard, Diamondback, Cappychimp, eViL D:, siulimagic, rafyvitto, and 911Sniper Rom of Virtuous Fusion. Well I could not post anything on that thread because they consider me a noob. So i decided to help those who would like to overclock their G2, and possibly Desire Z, but as i do not have one and did not test it, i cannot confirm it.
So anyways i downloaded: boot-2.6.32.39-amazinglarry-042611.zip ,from another thread which allows the G2 to be overclocked to 1.708 MHz. Since then the Sense 3.0 exp. rom has been blazing fast. it was great before, but amazing now! only issue is its broken the camera and camcorder. So if you cant live without those, then dont try this!
Also just as a precaution, i am not responsible if your device blows up, attacks you or gets bricked =) Just thought i could help those who keep asking for an OC kernel.
Oh and btw, read the article http://forum.xda-developers.com/showthread.php?t=1052647 to set the profiles right, you need to have your screenoff setting at 245 min and 806 max, the reason is because the device can freeze when jumping from 245 min to 1708 max.
My Install method
1)Download OC Kernal from above
2)Flash with ROM Manager and ClockworkMod Recovery 3.0.2.4
3)Dont wipe dalvik cache or anything!
4)Device resets and you now have an Overclocked G2
5)Be sure to set your profiles correctly with SetCPU or whatever else you use
6)Enjoy Blazing fast Rosie =)
If anyone can help fix the cam and camcorder after applying this OC, Please let me and everyone else know! I will keep working on it myself and will report back with what I come up with.
So good luck to everyone, hope this helps! =)
Donations accepted never required =D
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=Z7AK4QW2PSH3E
Click to expand...
Click to collapse
LOL...why did you post a donation link. You have no contribution to the kernel or rom.
Sorry, But everyone here knows that aosp (maybe modded) gb-kernels work with sense but break functions like camera and so on. So wth should someone donate , Also we don´t have the source code of the official test gb sense kernel to extract functions or mod it...
Sorry for my bad english. I´m from Germany.
b1oh4zard said:
Sorry, But everyone here knows that aosp (maybe modded) gb-kernels work with sense but break functions like camera and so on. So wth should someone donate , Also we don´t have the source code of the official test gb sense kernel to extract functions or mod it...
Sorry for my bad english. I´m from Germany.
Click to expand...
Click to collapse
You people are annoying...who cares if there is a donation link...its that wrong to make money? If someone wants to donate for nothing..LET EM!!!! How is it hurting you?
Retarded
Sent from my T-Mobile G2 using XDA Premium App
Enjoy having no camera/wi-fi/anything else btw - just sayin'
qzfive said:
Enjoy having no camera/wi-fi/anything else btw - just sayin'
Click to expand...
Click to collapse
I stated that it will break the cam, camcorder, etc.. but so many people were complaining and asking about the overclock. So I just posted how they can get it. If you dont want it, don't get it. Simple as that. Remember Simple is as Simple does. =P Have a great Day! And Thank You Spastic909, Freedom of Anything and Everything, After all we live in America! Happy Mothers Day as well =)
Most if not all the people know that you can apply gingerbread kernels to gingerbread sense roms. Most people know that it breaks most core functions (as previously stated).
Seeing as this is not a fully functioning overclock, nor a question as to how to make a functioning overclock, why is this thread here, in the Q&A section? It is not an answer to the request for an overclock kernel for Gingerbread sense, so I am stumped as to the point of this topic.
Can anyone confirm this works for desire Z as well just like g2. No mind if camera is not working. As long as wifi works im happy, i use wifi may not have internet abbo.
where is my face palm icon?
that will have to do I guess.
pmcqueen said:
where is my face palm icon?
that will have to do I guess.
Click to expand...
Click to collapse
Instead of a facepalm reaction an answer would be more appriacted.
Definitly when there is mentioned "not sure if desire Z gives same result",
Or atleast something in that direction. So could you do answer the question or leave your comments away. Thank you.
This thread should be closed, all of the devs can confirm that older kernels will not work with virtuous fusion, xboaders or rmk stock roms. You can try them but things will break definetly wifi and camera and probably lots ot other things. Hope fully it won't be long until we have the source code for the newer kernels, the DHD has all ready got there's so hopefully we won't be far behind.
Sent from an ice cream sandwhich
Hey soulbody, it will break the wifi on desire z, it did on my friends phone anyways. But you can try it. If it does break, all you have to do is hold power and volume down to boot into recovery and reflash your rom from zip off your sd card. Making a backup of your current rom would be wise. I hope that helps. Take care
Sent from my T-Mobile G2 using XDA App
Hmmm ... If someone will read a half of any custom kernel for G2 thread he will find out about everything you've just written. So no doubt you post here only for donations but as someone above written do what you wanna do and make suckers pay you for it
rmk has pulled the form DHD final leak and has built a kernel allowing overclocking and trackpad wake.
PatrickHuey said:
rmk has pulled the form DHD final leak and has built a kernel allowing overclocking and trackpad wake.
Click to expand...
Click to collapse
no TP wakeup yet but it has OC
hi all
I finally decided to give some new life to my HTC Desire, rooted it, S-OFFed it as well and after long search for most suitable ROM for me, flashed Cool Droid v3 Bravo on it.
ROM looks great and works fine, but it has only one big issue (so far) - I cannot turn on data roaming, it is turned off by default and tweaked to stay that way. As a noob, obviously I cannot post this question in specific thread about that ROM: http://forum.xda-developers.com/showthread.php?t=1279016 so I have to ask here:
is there any fix for it, an advice or procedure how to change the script (I figured out that it's just a line in build.prop file but it doesn't allows me to change it). I'm not scared to tinker with it as long as it's not too complicated and makes sense.
I need it because I live in Europe, travel a lot and I use national roaming very often.
Please if anyone can help me, because this issue is a dealbreaker for me with this ROM and I'd hate that.
Thanks in advance
PS: the screenshot shows how the setting stays no matter what option I choose
Install a rom that hasnt got a lot of Verizon stuff in it.
I would, if I can find fast, stable and reliable ROM, based on GB and preferably with Sense on it.
I'm not into flashing new ROM every few days and trying out every custom ROM out there, I just need my phone to work well within its capabilities as I travel a lot and use it for work.
I guess that this data roaming issue shouldn't be too complicated to solve, it's a piece of cake for every developer...
NoobVulgaris said:
I would, if I can find fast, stable and reliable ROM, based on GB and preferably with Sense on it.
I'm not into flashing new ROM every few days and trying out every custom ROM out there, I just need my phone to work well within its capabilities as I travel a lot and use it for work.
I guess that this data roaming issue shouldn't be too complicated to solve, it's a piece of cake for every developer...
Click to expand...
Click to collapse
Runnymede AIO v6.0.4.3 stable is probably as close as u will come.
hmm.. I'll check it out, thanks
colin_404 said:
Runnymede AIO v6.0.4.3 stable is probably as close as u will come.
Click to expand...
Click to collapse
well, I flashed this rom and been testing it last few days. It has pretty much all that I need but I find it quite heavy on my device. Too many times it slows down, lags and freezes, especially when running games and apps that need syncing. Also, quite a lot FCs. Battery drain is also significant.
I'm not sure where exactly the problem is, it just gets stuck with black screen and only notification bar is visible.
Any advice where to look at? Might it be kernel, radio or CPU issue?
thanks
A tip for ya when flashing that rom. When u first install it from recovery and reboot, when it boots past bootanimation and gets to the lockring.... Leave it settle for 15-20 mins, dont unlock. Then after 15-20 mins unlock then reboot. Then no force close, sounds mad but its true. U could try a different kernal, Droidzone has a few good 1s for sense 3.5 roms and also in settings/RCMix tweaks, u can fix permissions there, try that, it sometimes fixes force close. Im using Aurora v6 special edition, its android 2.3.5 and sense 3 and not 1 problem so far, great rom infact. Saying that, Runnymede aio s.e is my personal favourite sense 3.5 and never had any problems with it, but letting it settle for 15-20 mins is a must.
About the radio.... What do u have? Lastest is recommended.
Sent from my non - JB HTC Desire
Runnymede AIO V6.0.4.3 SE is freezing
jmcclue said:
A tip for ya when flashing that rom. When u first install it from recovery and reboot, when it boots past bootanimation and gets to the lockring.... Leave it settle for 15-20 mins, dont unlock. Then after 15-20 mins unlock then reboot. Then no force close, sounds mad but its true. U could try a different kernal, Droidzone has a few good 1s for sense 3.5 roms and also in settings/RCMix tweaks, u can fix permissions there, try that, it sometimes fixes force close. Im using Aurora v6 special edition, its android 2.3.5 and sense 3 and not 1 problem so far, great rom infact. Saying that, Runnymede aio s.e is my personal favourite sense 3.5 and never had any problems with it, but letting it settle for 15-20 mins is a must.
About the radio.... What do u have? Lastest is recommended.
Sent from my non - JB HTC Desire
Click to expand...
Click to collapse
I followed that flashing procedure pretty much, I was gentle and easy going right after flashing it, not rushing anything, left it to settle (maybe not 20 mins) and rebooted it again. Actually, FCs are not such a big issue like freezing. Usually 1fc comes on 5 freezes. My radio is 5.11.05.27, I haven't touched it since rooting the phone with Revolutionary. I kinda hesitate to flash it, I don't want to brick my device because I'm not sure about the right procedure.
As my name says, I'm just an ordinary noob, not too experienced with all this.
thanks
Did u do a full wipe before flashing.
Runnymede AIO V6.0.4.3 SE is freezing
colin_404 said:
Did u do a full wipe before flashing.
Click to expand...
Click to collapse
I did a full wipe, formatting and partitioning SD card from the scratch (fat32 partition included), 4ext is 1GB... I did all following developer's recommended procedure step by step. SD card is brand new SanDisk 8 GB, class 6.
It works well after reboot, but after a while, as soon as several apps are opened, it lags and hangs heavily, making the phone unusable.
I'm not sure does it matter, but I moved all movable apps to "phone storage", except those that have widgets that I use. Yet, the phone still freezes even when using non-movable apps.
I'd flash it again right now but I get messed up contacts list every time because not all my contacts are on google and I have 1000+ in total, so after every restore I get many duplicates and triplicates, so I'd really like a solution that doesn't include another flashing.
Here is a better tip. Don't use sense 3+ if you want reliability. I recommend cool bravo s, but change the kernel.
cronus101 said:
Here is a better tip. Don't use sense 3+ if you want reliability. I recommend cool bravo s, but change the kernel.
Click to expand...
Click to collapse
Iv no problems at all, using sense 3.0 right now, 1 of the best roms iv ever used.
Sent from my non - JB HTC Desire
jmcclue said:
Iv no problems at all, using sense 3.0 right now, 1 of the best roms iv ever used.
Sent from my non - JB HTC Desire
Click to expand...
Click to collapse
So your telling me that you have no fcs, no lags, especially when receiving a call, no battery drains? Do you use your phone? I'm not trying to be rude or anything, I really want to know, because every sense 3+ rom I had wasn't 100%. Which rom are you using right now?
Runnymede AIO V6.0.4.3 SE is freezing
cronus101 said:
So your telling me that you have no fcs, no lags, especially when receiving a call, no battery drains? Do you use your phone? I'm not trying to be rude or anything, I really want to know, because every sense 3+ rom I had wasn't 100%. Which rom are you using right now?
Click to expand...
Click to collapse
I'd like to stick with this rom.. I do have lags but not when receiving a call, that's why I suppose that I just have to do some detailed tweaking and that's where I need help as I'm not experienced with it. FCs are actually not so bad, pretty much the same as I had them on my stock froyo so I can live with that. Battery drain is there though, but I've been using the phone intensively since flashing RM AIO, trying to set it up.
Can maybe someone post here proper radio/kernel/CPU settings please?
My device is amoled version, with 5.11.05.27 radio and 2.6.35.10 [email protected] #11 kernel
CPU settings are untouched after flashing the rom, so they are "default".
thanks
cronus101 said:
So your telling me that you have no fcs, no lags, especially when receiving a call, no battery drains? Do you use your phone? I'm not trying to be rude or anything, I really want to know, because every sense 3+ rom I had wasn't 100%. Which rom are you using right now?
Click to expand...
Click to collapse
Aurora v6 special edition. No lag, no fc, battery is great, obviously its not as good as AOSP. And yes i use my phone, im using it now writing this
Sent from my non - JB HTC Desire
jmcclue said:
Aurora v6 special edition. No lag, no fc, battery is great, obviously its not as good as AOSP. And yes i use my phone, im using it now writing this
Sent from my non - JB HTC Desire
Click to expand...
Click to collapse
How long have you been using it?
Sent from my HTC ONE X
cronus101 said:
How long have you been using it?
Sent from my HTC ONE X
Click to expand...
Click to collapse
Lol not long but plan on sticking with it. Im using a Droidzone kernal, OC set to min 245 and max 998 Smartassv2 and cpu set to the same with ondemand. Like i dont play games on my phone, i just use it for phone calls msgs and internet (usuall stuff) i charged it to 100% yesterday and iv now still 53% which is pretty good going.
Sent from my non - JB HTC Desire
Hey Mates,
After rooting my phone and installing SetCPU to underclock it so as to save some battery time..I created Screen OFF profile and a Battery level profile..
It works fine for some time(like a few hrs) but after that my phone goes down...I cant even power on it by simply holding the power button!
It doesnt show up anything while I do that..
I have to hold the Power button for 10-15 seconds so it makes a hard power on by blinking the Capacitive buttons On and Off!!
SetCPU worked very fine on my HTC Wildfire S...but donno why is it troubling me in HOX!
Has anyone else faced this problem? or what do u think is the problem and what would be an ideal solution?
Help would be greatly appreciated!!
Dont face this with setcpu, and there is not much info about your phone rom. But pls try trickster or no-frill softs to see if problem's gone or not. Then, we'll have more info for solution.
In case of customs rom, go searching in the rom thread if any similar problem?
Alternatively, reflashing rom might clear the issue.
Sent from my HTC One X using xda app-developers app
oops sorry about that!
Im using a Stock Rom JellyBean with recent Sense 5 update..
Yeah...as u suggested been using No Frills for the whole day..no sign of Shutdown of Restart so far...and its working fine..
So..I guess SetCpu is the culprit...but I really like the profile feature in it..I dont think even the latest version of No Frills has such..
Would you suggest any app with that feature?? Or a solution for SetCpu with my current provided information?
Help would be great
iPriDvI said:
oops sorry about that!
Im using a Stock Rom JellyBean with recent Sense 5 update..
Yeah...as u suggested been using No Frills for the whole day..no sign of Shutdown of Restart so far...and its working fine..
So..I guess SetCpu is the culprit...but I really like the profile feature in it..I dont think even the latest version of No Frills has such..
Would you suggest any app with that feature?? Or a solution for SetCpu with my current provided information?
Help would be great
Click to expand...
Click to collapse
- No-frills cpu has no profile function, but i'd prefer the soft as it's very light (small size) and battery friendly (not running on background). I can simply open nofrill to change when needed. Also, profiles are not really in frequent usage (the stock rom can manage battery effectively enough, and profiles even consume battery during monitoring the "if" conditions to be matched for activation).
- If you like profiles, go with setcpu. Try to uninstall and reinstall to see if it works. If not, try previous setcpu versions. Worst case, try reflash stock rom if no luck. My phone is also on stock 4.2.2 and no problem with setcpu so far.
- Trickster is more powerful with lots of settings to play with, but requires you more knowlegde to make the best out of it.
Sent from my HTC One X using xda app-developers app
Screen off profile saves me a lot of battery rather than it consumes it!!
Tried with a stable previous version of SetCpu which used to work fine on Wildfire S..but that too didnt help..Same problem
How to reflash a Stock ROM? Custom Rom flashing is the thing I know ..but this is new..
And would changing kernel helps? If I should try whats a stable for HOX?
(sorry for the num of questions!)
iPriDvI said:
Screen off profile saves me a lot of battery rather than it consumes it!!
Tried with a stable previous version of SetCpu which used to work fine on Wildfire S..but that too didnt help..Same problem
How to reflash a Stock ROM? Custom Rom flashing is the thing I know ..but this is new..
And would changing kernel helps? If I should try whats a stable for HOX?
(sorry for the num of questions!)
Click to expand...
Click to collapse
Flashing stock roms are similar to stock: download rom and flash with custom recovery. But flashing stock rom is just one of some other ways to return phone to stock (restore nandroid backup, running ruu, flashing ota update zip..)
You can find more details on Sticky post -general info of htc one x, including kernels and many interesting stuffs (mod, scripts...) if you want to go deeper.
Sent from my HTC One X using xda app-developers app