Hi all,
My XDA IIs works well before. But few days ago the Power button doesnt work properly, it can turn on the phone, hold to turn off the back light, but I can't use it to turn my phone screen off like before. Anyone has same problem ?
Can you see any part of the screen? It might just be that the backlight adjustments are set too low when the unit isn't cradled. You might be able to see the screen in daylight.. or maybe it was inside your home. I forgot where I was at when it happened to me. In anycase, if you can see a bit of images on your screen, go into the Backlight properties and change the setting to your liking.
Good luck..
The problem is i can just press the power button to turn off my phone BEFORE (the screen is completly off), and NOW it doesnt work at all ! When my phone was off, I can press the Power button to turn it on, or when I hold it for few seconds the back light will be turned off, but press once to turn off. I dont know why, if somthing wrong with the Power button it should be doesnt work at all, that's mean i cannot turn on my phone as well. But other functions of the Power button are still work well, except the 'Turn off' :roll:
power off doesn't work anymore
I have the same problem here. I can't use the power button to power off my qtek 9090!!
i can use the power button to turn my pda on and to switch the background light on and off - so the "hardware side" of the power button is working.
however, i can't use the power button to turn off the device. it's very annoying, because i can't put it in my pocket after finishing a call :-(
this should be some sort of a software problem - so i hard resetted my device (a couple of times) - but that didn't help!
can anyone help?
thanks,
lorenz
the ba doesn't turn off it is always on staand by mode. ->settings -> system -> button lock
this will stop any missed call because when the ba is in standby the power button is the only one to work
power on is no problem. i can't put my BA into standby mode. if i press the power button while the BA is turned on, nothing will happen. the screen will stay on, the background light stays on.
i have no way to put it into stand-by with the power button!
try this and see if it works. it's a software app that wil rest, shut down, and turn the screen off. just copy it to your BA temp directory and install it.
power button problem
nemchua
Is your problem solved ?
Because I have the same problem.
Power of switch doesn't work !!!
Any help would be welcome.
power button problem
Does anyone solve the problem???
Had the same problem...
I had the same problem going on for about two weeks or so...never changed anything and it went away all by itself.
The problem has not come back now in over 4 months.
Sure would love to know what the problem was tho...
Greetings,
Noddy
Power Off does not work
Add my name to people with this problem.
The only event I can link it to is this: I deleted my Motorola Bluetooth headset and installed a Logitech headset. I noticed the problem (can't turn OFF with POWER BUTTON) soon after that.
same problem for me ..... someone must know !!!!
I think it is a hardware problem. The contact is not making cleanly. Disassemble and spray time, perhaps.
It's a standard push switch, easy enough to replace, I occasionally list themon ebay but any phone repairier should have them in stock.
Richard
i had same problem yesterday afternoon, but it is ok now. recovered by himself
Write again in two weeks and let us know if it is still healthy. In my case, anintermittent problem became continuous.
Can't turn the screen on after pressing power button
I have a problem with my Bell Atrix. After pressing power button to lock the screen, i can't wake up the screen up by pressing that button again. Could anyone tell me how to fix it pls.
When I'm carrying around my BA, the buttons get accidentally pressed almost constantly.....which causes it to turn on, and it drains my battery alot.
Is there anything I can do or any program I can download that will lock all the keys when it's turned off, so that only the power button works? The power button getting accidently pressed isn't a problem becuase it's on the top of the BA.
it's already possible
look under settings->system-> buttons (or sth. like that, don't know the english entry)
Thanks......I can't believe that I didn't see it before.
Hi, i have just got a new xda orbit and noticed that when the backlight goes off after a set period (30 secs), it seems to be still lit but only very slighty, so at night you still see the today screen etc. But if i press the power button then the display goes off. Is this correct ?
The reason im asking as i have been using an xda mini s for over a year and when the backlight times out the display is not visible at all in the dark. You have to press the power button to see the screen again.
Hope this makes sense
Yes, that is fine. The dim backlight will go out in time too.
MaskedMarauder is 100% right. It will go out eventually.
Ok thanks guys for the quick reply, just obsevered it last night and noticed it was different.
Thanks again...
I've tried posting about this before, but it never gets answered - i've got a mda III, and that dims to brightness 1 (from within the registry), but will never go out - regardless of what rom i've tried.
I've also noticed that i can force set it to 0 in the registry, but thats the overall screen brightness. None of the other reg keys (putting bkl1:, etc in the various power keys) seem to work.
Any one got any ideas or utils to sort this? I'd try to code this as there are some code samples which allow you to force this, but i've not got VS
Like you i've tried all the registry edits i can think off to no avail. I too have a wizard and find this irritating - plus backllight stays on when media player on etc.. No difference with wm6 so i guess it maybe a hardware issue. I use a small app to turn off display when apps are running and i want the display off.
I use backlight time of 30 secs and power of 1 minute - so overall similar to my wizards backlight time of 1 minute.
why not..
why not just pres the I/O button on the side to turn off the backlight when u don't want it on? obviosuly a bit of a hassle, but if u get into the habit of doing it, no problems
Because that puts the device into standby and turns everything else off too (except the phone etc.) So if your listening to music your plunged into silence.
I had an XDA2i (Alpine) previous to my Orbit and I actually prefer the dimmed screen.
A brief press on the 1/0 power button WILL make the device go into standby.... BUT...
press and HOLD the power button for LONGER than 2-3 seconds and it toggles the backlight on and off, whilst STILL keeping the device on!
hope this helps
Joe
Seems that if I close the phone app, or slide the keyboard shut and then while the buttons are still lit I turn the phone off (standby), they'll stay lit indefinitely. If I turn the phone back on after the normal timeout period they'll go out immediately. But unless I do so they'll stay on.
Anyone else notice this on their phone? Is there a way to prevent it?
I'm on EnergyROM Leo build 21877 and I couldn't replicate this. I'd say it's definitely a bug, but unfortunately I don't know how you'd prevent this other than waiting for the buttons to turn off.
So if your front buttons are lit and you turn your phone off the button lights immediately go out?
Something else I found sort of odd is that the phone and end buttons are not colored green and red respectively. That's purely an aesthetics things, but uncommon at least in the phones I've owned.
The light thing is somewhat inconvenient. When taking a call I have to wait four or five seconds after hanging up before the lights go out and I can turn the phone off. If nothing else a registry edit that would allow the lights to extinguish quicker than that would be a handy workaround.
U have a stock Galaxy Tab S T800, and among weird battery issues I posted about here, my touch key lights won't turn on at all. I've tried setting the duration to 1.5 seconds, 6 seconds, and Always On, and they never come on. Has anyone else had this issue? Is there a setting somewhere else that could be disabling the touch key lights?
Never mind, I found the setting in Power Save Mode to disable the Touch Key Lights.