How do you enable Multi touch on a rom? Aosp/sense is it just the kernal. Or do you need something else? I currently have a amoled screen using latest hboot s-off 11/19 radio
sent from my Ever Changing incredible
lahegry said:
How do you enable Multi touch on a rom? Aosp/sense is it just the kernal. Or do you need something else? I currently have a amoled screen using latest hboot s-off 11/19 radio
sent from my Ever Changing incredible
Click to expand...
Click to collapse
It's a code change that is being put into the kernal that enables this i believe.
g00s3y said:
It's a code change that is being put into the kernal that enables this i believe.
Click to expand...
Click to collapse
That's what I thought but no matter what kernel I try I only get 2 points maybe it's just me
sent from my ever changing Incredible
believe it or not, it has something to do with the recovery version you have installed. read this post:
http://forum.xda-developers.com/showpost.php?p=10100653&postcount=996
follow chad0989's directions, install his 12-23-2010 incredikernel and it should work. I was in the same boat and this fixed it for me.
edit:I just noticed you may have a desire z rom, from what I've gathered, the multitouch will not work on desire z based roms. The above worked for me on skyraider 3.5, not sure if anyone has it working on a desire z rom yet.
Just curious, what would you need more than three points for? Can't think of a single thing I've needed that required 3 touch points.
Sent from my HTC Incredible using XDA app.
Related
How do i get flash 10.1 with the new roms?
I cant find it on market for some reason :S
suggestions guys?
l1nuxfre4k said:
How do i get flash 10.1 with the new roms?
I cant find it on market for some reason :S
suggestions guys?
Click to expand...
Click to collapse
I think most of them have it "built in" already.
edit: As Lee said, it's default feature in 2.2.
Its built into all 2.2 roms
Sent from my HTC Desire using XDA App
Hi, i rooted one piece hd and flashed ROM (TRHRHD_v05) on it but strangely after the whole procedure the phone didnt show any languages that this ROM has. I factory set before and after the flashing procedure but still same problem. I have used this ROM previously on other HD phones and never had this problem. I forgot to check the version of the phone before flashing. Any ideas?
someone please help me out..
What is this rom and is it built for the DHD?
Blinkydamo said:
What is this rom and is it built for the DHD?
Click to expand...
Click to collapse
Yes it built for DHD, i have personally flashed it on many HD phones and it gives me the languages i require, but having problems with this one phone i got.
Do you have a link to the thread?
Sent from my Desire HD using Tapatalk
Post deleted. I will no longer be contributing to XDA due to their lack of adequate tools and support.
Could I flash this using cwr 3?
GunToYoMouth123 said:
Could I flash this using cwr 3?
Click to expand...
Click to collapse
Yes, either version works.
rmk40 said:
Yes, either version works.
Click to expand...
Click to collapse
Ah, alright thank you !
Sent from my HTC Vision using XDA App
The battery life on this rom is actually kinda good.
Better than other sense roms. Thanks for this one,im looking forward to a rom based on this one or atleast the new gingerbread sense from you sir. Your work is good.
Sent from my HTC Vision using XDA App
So this is just a stock vision Sense? I'm confused on what's added on Virtuous and not on stock Sense?
are there any screenshots?
thanks
Pretty sure its just vision sense.
Sent from my Rooted God-Like Htc Vision.
so... i can flash this on my Desire Z??
It's just almost Pure stock except:
Rooted with my customized version of Superuser (required until ChainsDD releases a version with my patches).
Deodexed with moderate compression throughout.
Busybox installed in /system/xbin.
Added large APNS list to /system/etc.
Yes,that`s all!
Otherwise its totally stock ROM.
Hi Guys! I have a short question concerning this ROM and Superuser
I used the 1.34 OTA Stock Sense ROM (right out of the box) and rooted my device with the HTC Vision Wiki tutorial. Everything worked fine.
Then "updated" to this ROM here and now my Superuser app keeps quitting as soon as I start the app.
I can't remove or update it (although there seems to be an update via Applanet).
Does anyone know how to fix it?
Thx in advance
Rawn said:
Hi Guys! I have a short question concerning this ROM and Superuser
I used the 1.34 OTA Stock Sense ROM (right out of the box) and rooted my device with the HTC Vision Wiki tutorial. Everything worked fine.
Then "updated" to this ROM here and now my Superuser app keeps quitting as soon as I start the app.
I can't remove or update it (although there seems to be an update via Applanet).
Does anyone know how to fix it?
Thx in advance
Click to expand...
Click to collapse
Can you capture and post a logcat of the failure occurring?
If I tried to use logcat on my device with Terminal Emulator and I get this error message:
"Unable to open log device /dev/log/main : Permission denied"
Does it mean I'm no longer on S-Off and due to that Superuser is quitting all the time?
does any1 have a release note for this HTC rom?
Does this make you lose all your data?
Just curious as its official if its possible to flash without losing everything (again)...
can I flash this to my Rooted G2 with Engineering SPL and Clock work?
Or does the kernel need changing and stuff?
death1246 said:
can I flash this to my Rooted G2 with Engineering SPL and Clock work?
Or does the kernel need changing and stuff?
Click to expand...
Click to collapse
long as you are rooted/s-off you can flash this rom, you can also use any of the kernels from here: http://files.virtuousrom.com/vision/kernels/virtuous/2.x/ standard is the recommended =)
I want to try some sense apps, but not a full sense rom. Can I take these and push them to my CM7?
I will try in a bit
In short, no. Sense apps need the sense framework.
@Mnemoch Yes. If you're coming from another Sense ROM you can flash this without wiping - I flashed this over the official 1.72 last night and then added the standard OC kernel for Virtuous. It's smooth as butter
benjamminzIS said:
long as you are rooted/s-off you can flash this rom, you can also use any of the kernels from here: http://files.virtuousrom.com/vision/kernels/virtuous/2.x/ standard is the recommended =)
Click to expand...
Click to collapse
thankyou flashing now.
I have a T-Mobile G2 ver. 2.3.4. How easy is it and what are the steps to install HTC Sense on my phone? Are there bugs or glitches? Please let me know. Thank you very much!
You just need to find and flash a Sense based ROM via CWM. Virtuous ROMs work very well. I switch between CM7 and Unity on a regular basis and both are stable enough for day to day use.
I assume you have already set the phone up for flashing different ROMs?
Flashing different ROMs? How is it done? I haven't done anything to it except updating it to 2.3.4 using XDA's method. T-Mobile's OTA was taking a long time so I researched and found XDA. Thanks XDA!
It sounds like you have a lot of reading ahead of you.
Flashing ROMs is essentially installing new firmware on the device via a program called ClockWork.
I recommend starting off by reading through guides and information on the link below. The devices typically has safeguards against allowing you to just flash new ROMs, so a process is involved to unlock the phone and allow you to do it.
Once you become familiar with what it is, then learn how to do it, and what it does. I followed the gfree method on XDA wiki and had no issues, but if I recall, being on 2.3.4 you cannot follow the same method and must downgrade first.
Read, read, read. Then read some more. Search is very helpful.
http://forum.xda-developers.com/showthread.php?t=916431
I Think you need to switch to the Desire Z hoot in order to handle the sense rom
evilcuber said:
I Think you need to switch to the Desire Z hoot in order to handle the sense rom
Click to expand...
Click to collapse
You do, but I didn't want to throw that out there if he didn't even know what ROMs were. He'll pick it up in his research.
biohazrd51 said:
You do, but I didn't want to throw that out there if he didn't even know what ROMs were. He'll pick it up in his research.
Click to expand...
Click to collapse
The Desire Z HBoot is required for Unity and Doubleshot, but not for Virtuous Sense v2.0.0, I believe.
redpoint73 said:
The Desire Z HBoot is required for Unity and Doubleshot, but not for Virtuous Sense v2.0.0, I believe.
Click to expand...
Click to collapse
I dono im not really sure
Sent from my HTC Vision using XDA App
if you are rooted, it should be somewhat simple. are you rooted?
Thanks for all the info and help guys but I'll stick to what I have for now. I read somewhere that there's still some glitches on the install like landscape is not working. And I'll do more research first so I won't brick my phone. Again, thanks guys! Peace!
Landscape rosie (homescreen) doesn't work for Unity. Its not an install glitch or bug, per se. The ROM based on HTC Sensation ROM, which does not have a keyboard, and therefore does not have landscape. Landscape rosie simply does not exist on that ROM, and the dev was fully aware that would be the case, all along. There is no Sense 3.0 with landscape rosie until HTC makes one.
Doubleshot has landscape rosie. Virtuous Sense is based on the official ROM for the Desire Z, so I assume landscape rosie works on that, as well.
There are also other Sense ROMs besides the Virtuous ones, like Insert Coin. But I don't know a whole lot about them.
evilcuber said:
I dono im not really sure
Click to expand...
Click to collapse
Searching the Virtuous Sense thread, somebody says that the DZ HBoot is not needed. But I can't personally confirm.
Is you are getting virtuous sense then landscape does work but if you get virtuous unity, landscape does not work
Sent from my HTC Vision using XDA App
Does anyone have a link for a stock kernel which would be compatible with my set up (in sig)?
I want to try a stock rom to see if I can get sky go to work on my desire as it can't be used on a rooted device, others have had success by changing their kernel.
Thanks in advance.
As far as I know you are stuck with thalamus' kernel if you are running Oxygen rom.
stankyou said:
As far as I know you are stuck with thalamus' kernel if you are running Oxygen rom.
Click to expand...
Click to collapse
So it is. But imho that's not really a disadvantage: _thalamus' kernel is a good one.
MatDrOiD said:
So it is. But imho that's not really a disadvantage: _thalamus' kernel is a good one.
Click to expand...
Click to collapse
I agree. He does come to me as somewhat arrogant but I got to admit the dude haz teh skillz.
Could I try a stock rom and kernel and then go back to my current set up or would I then be unrooted?
Well you can "try" and flash the kernel I am using I suppose... but as far as I know it will break your camera and probably some other stuff I don't know. Do a nandbackup just in case you want to be adventurous. You only wanna find out if Sky would work if you change kernels first right?
stankyou said:
Well you can "try" and flash the kernel I am using I suppose... but as far as I know it will break your camera and probably some other stuff I don't know. Do a nandbackup just in case you want to be adventurous. You only wanna find out if Sky would work if you change kernels first right?
Click to expand...
Click to collapse
Yes that's right, it has to be a stock kernel as sky do a check on the kernel before the stream loads apparently.
Well if it's stock kernel that it requires, then you have to use the official Sense based rom and kernel. All sense roms here uses a custom kernel so you are out of luck. You can't use Sense kernel on AOSP roms anyway.
OK cheers
I will have to wait for techy people to hack the sky go app then.
Depending on how Sky works, you can try and flash one those sense based roms. Who knows, the custom kernel they have might work. I have the impression that they are all based on the original sense kernel anyway. Or just wait for someone to hack the app.
longster10 said:
Does anyone have a link for a stock kernel which would be compatible with my set up (in sig)?
I want to try a stock rom to see if I can get sky go to work on my desire as it can't be used on a rooted device, others have had success by changing their kernel.
Thanks in advance.
Click to expand...
Click to collapse
Can't see sigs in tapatalk...
Sent from my HTC Desire using Tapatalk
rootSU said:
Can't see sigs in tapatalk...
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
HTC Desire PVT3 S-OFF
Radio -5.17.05.23
Rom - Oxygen-2.3.2-Bravo style Mildwild V-2.2
Kernel -2.6.35.14_r3-stable [email protected]#1