Related
Hello guys,
I need some help here with my DHD. My serious problem is about its signal. I am in my home and i am talking on my DHD, but sometimes it loses the signal. In my house, the signal is very good, not always at 3G but at 2G it is always at full signal.. Although, it sometimes loses its signal and my call is closing.. By the way, to be more clear, when my call is closing i check the signal, and i see it to be full... At this step, when i am checking about the signal, sometimes i see the signal to drop down to zero, after 1-2sec.. But the other times it stays full.. But in both of these cases, my call is closing many times.. What can i do to solve this problem, anyone knows?
Thanks, and i hope to help me with this.
P.S. Sorry for my bad english guys And one more problem that i have is that my DHD few times, it lags, stucks, dont know how to say it, and in first case it unstucks afters 30-40 sec, or in second case it restarts..
AFAIK, the gsm antenna is located in the bottom cover that the sim and microsd is hidden behind. If the contacts inside dont make a good connection you will probably get lost reception from time to time. You could try another cover, or bend the two gold coated spring contacts near the simcard very slightly outwards to make the connection more reliable.
knegge said:
AFAIK, the gsm antenna is located in the bottom cover that the sim and microsd is hidden behind. If the contacts inside dont make a good connection you will probably get lost reception from time to time. You could try another cover, or bend the two gold coated spring contacts near the simcard very slightly outwards to make the connection more reliable.
Click to expand...
Click to collapse
I tryed it mate, and tnx for your reply. But today in the morning, when i was talking on the phone, my call closed 4-5 times in a 20min call.. Dont know what is happening, but maybe anyone of you guys knows another tip to help me? Maybe any change on the software? And by the way, my phone had in automatic the choice about 2G/3G, but i changed it some days ago only to 2G because in my house the 3G signal is not so good always, and if it loses the 3G signal and it needs to change to 2G, the call is closing for sure..
I have the same problem with my DHD, I live in an area where the 3G signal is crap. I found that when running CM7 you can switch off the 3G and just use the 2G which helps. If you using a sense ROM you don't get that option which is a pain, so I'm sticking with CM7 for the time being until someone produces a workaround for the other ROM's.
switch off the 3G and just use the 2G which helps.
^^^^^This
sgladman said:
I have the same problem with my DHD, I live in an area where the 3G signal is crap. I found that when running CM7 you can switch off the 3G and just use the 2G which helps. If you using a sense ROM you don't get that option which is a pain, so I'm sticking with CM7 for the time being until someone produces a workaround for the other ROM's.
Click to expand...
Click to collapse
You can swith off the 3g in Sense ROMs, press Menu > Settings > Wireless & Networks > Mobile Networks > Network Mode change to GSM Only not GSM/WDMA Auto (WCMDA is 3g)
sgladman said:
I have the same problem with my DHD, I live in an area where the 3G signal is crap. I found that when running CM7 you can switch off the 3G and just use the 2G which helps. If you using a sense ROM you don't get that option which is a pain, so I'm sticking with CM7 for the time being until someone produces a workaround for the other ROM's.
Click to expand...
Click to collapse
Sorry, but what u mean with CM7??
secret82 said:
You can swith off the 3g in Sense ROMs, press Menu > Settings > Wireless & Networks > Mobile Networks > Network Mode change to GSM Only not GSM/WDMA Auto (WCMDA is 3g)
Click to expand...
Click to collapse
I haven't got that option, only WDMA/GSM Auto or WDMA.
bluebirds said:
switch off the 3G and just use the 2G which helps.
^^^^^This
Click to expand...
Click to collapse
I am using only 2G, but i still have the same problems... pfff.. Dont know what to do..
sgladman said:
I haven't got that option, only WDMA/GSM Auto or WDMA.
Click to expand...
Click to collapse
Oh OK, that sounds like an old sense ROM. I used to have this problem when I first got my phone. Im using Android Revolution which is based on the latest Gingerbread.
dar309 said:
I am using only 2G, but i still have the same problems... pfff.. Dont know what to do..
Click to expand...
Click to collapse
Try your sim in another phone. If the signal is still bad you should try contacting your network operator and ask them if there are any faults or if they can do anything to improve your signal.
secret82 said:
You can swith off the 3g in Sense ROMs, press Menu > Settings > Wireless & Networks > Mobile Networks > Network Mode change to GSM Only not GSM/WDMA Auto (WCMDA is 3g)
Click to expand...
Click to collapse
Which is the difference between sense ROMs and no-sense one??
dar309 said:
Which is the difference between sense ROMs and no-sense one??
Click to expand...
Click to collapse
No sense is like CM7 (Cyanogen Mod 7). They are as close to standard google android with added features. Standrard android is found on googles own devices like Nexus and Nexus S. Although CM7 is based on AOSP (google it). Sense has a different (rosie) launcher and added extras included such as widgets, Icons, and other extra HTC only features. Look in the Desire HD andorid development thread for different ROMS with sense no sense.
secret82 said:
Try your sim in another phone. If the signal is still bad you should try contacting your network operator and ask them if there are any faults or if they can do anything to improve your signal.
Click to expand...
Click to collapse
I was using some times another phone but i didnt have this problem same as i have it on my DHD. Yeah, maybe i had it few times on my other phone but occasionally, and not so many times like these on my DHD.
I had the same problem. I had to order a new sim because my sim card was old and apparently wasnt very compatible with my DHD. I'd suggest getting a new sim from your service provider
Hmm leaked from my thumbs through my mobile device....
K Dotty said:
I had the same problem. I had to order a new sim because my sim card was old and apparently wasnt very compatible with my DHD. I'd suggest getting a new sim from your service provider
Hmm leaked from my thumbs through my mobile device....
Click to expand...
Click to collapse
When u are saying that your sim card was old, how many years do u mean?
Cause i think that i have bought it about 4years ago... You think i have to ask for a new sim card with the same number or what??
I flashed 2.3.4 onto my 2.3.3 R800i and now I can no longer get 3g to work for anything other than messaging and phone calls. I've tried everything i could think of in the settings, any clue how I could fix this?
Did you put your apn settings in?
Sent from my R800a using XDA App
I had a problem with 3G long time ago after being abroad and using Airplane mode and/or data settings. Could not reactivate 3G for some reason and rebooting did not help but I had some on/off widget thing installed at the time and tried one of the 3G or data switches on it and it started working. Hope it helps
thatsupnow said:
Did you put your apn settings in?
Click to expand...
Click to collapse
perhaps not, how do i go about doing this for rogers?
thatsupnow said:
Did you put your apn settings in?
Click to expand...
Click to collapse
I spoke to a rogers agent to get the apn, thanks, wouldn't of know to do it otherwise
Right on man glad you got it worked out I went thru the same stuff when I first got my x10 it was a little frustrating but lesson learned
Sent from my R800a using XDA App
mine has a glitch where it switches the network it's assigned to by itself. Rogers shows up as two networks, one edge and one 3g/hspa, and I noticed if my reception is bad at a certain location it will sometimes switch to edge only, and not turn back. It's only been doing this after the update to 2.3.4
Edit/update: I figured out you can force the phone to never use edge, if you change it from wcdma preferred/gsm to only wcdma
Sent from the best phone ever
Ok so I have an unlocked LG Nitro HD with custom ROM (CM10) and it has a very weird problem. I've tried two different AT&T MVNO SIM cards (AirVoice and Consumer Cellular) both have the same issue. My data signal keeps changing from H to H+ and occasionally to 3G like every few seconds regardless of where I am using the phone even outside. I don't understand what the problem is. What could be the issue?
screwregi said:
Ok so I have an unlocked LG Nitro HD with custom ROM (CM10) and it has a very weird problem. I've tried two different AT&T MVNO SIM cards (AirVoice and Consumer Cellular) both have the same issue. My data signal keeps changing from H to H+ and occasionally to 3G like every few seconds regardless of where I am using the phone even outside. I don't understand what the problem is. What could be the issue?
Click to expand...
Click to collapse
Are you able to use mobile data or are you just wondering why the icons go back and forth?
lordcheeto03 said:
Are you able to use mobile data or are you just wondering why the icons go back and forth?
Click to expand...
Click to collapse
Data does work but it seems to drain the battery with the networks constantly switching and on occasion I get a "No Connection" screen on certain apps, I guess because if I open an app while its swapping networks the app cant connect. It's strange.
screwregi said:
Data does work but it seems to drain the battery with the networks constantly switching and on occasion I get a "No Connection" screen on certain apps, I guess because if I open an app while its swapping networks the app cant connect. It's strange.
Click to expand...
Click to collapse
Yeah, constantly swapping networks will drain the battery.. what about your APN settings?
lordcheeto03 said:
Yeah, constantly swapping networks will drain the battery.. what about your APN settings?
Click to expand...
Click to collapse
They are set up properly.
I had another odd problem, just a few minutes ago was texting someone and all of a sudden phone froze while vibrating then restarted! Don't know if that's a bug in CM10 or what, maybe the network swapping is as well.
screwregi said:
They are set up properly.
I had another odd problem, just a few minutes ago was texting someone and all of a sudden phone froze while vibrating then restarted! Don't know if that's a bug in CM10 or what, maybe the network swapping is as well.
Click to expand...
Click to collapse
Maybe make a backup of your CM10 and try flashing a different ROM not based on CM10.
screwregi said:
They are set up properly.
I had another odd problem, just a few minutes ago was texting someone and all of a sudden phone froze while vibrating then restarted! Don't know if that's a bug in CM10 or what, maybe the network swapping is as well.
Click to expand...
Click to collapse
I think this is the same issue that I recently fixed in quattrimus. I will try to get the fix included in the cm kernel soon. You might try my Rom to see if the fix works.
lordcheeto03 said:
Maybe make a backup of your CM10 and try flashing a different ROM not based on CM10.
Click to expand...
Click to collapse
I tried installing CM9 and it appears to have fixed the problem, the phone doesn't try to connect to the H+ network anymore, only the H network and seems to stay on it so far. I did see it quickly go over to the 3G network but it doesn't appear to be causing any issues, it went right back to the H network. However, I really wish the CM10 ROM worked right, as CM9 is so old...
screwregi said:
I tried installing CM9 and it appears to have fixed the problem, the phone doesn't try to connect to the H+ network anymore, only the H network and seems to stay on it so far. I did see it quickly go over to the 3G network but it doesn't appear to be causing any issues, it went right back to the H network. However, I really wish the CM10 ROM worked right, as CM9 is so old...
Click to expand...
Click to collapse
CM10 is snappy and oh so buttery smooth, I give you that. On another note, did you try any other CM10 variants? I'd give tdmcode's AOKP a spin. He says he might have fixed that problem you were talking about in his build.
lordcheeto03 said:
CM10 is snappy and oh so buttery smooth, I give you that. On another note, did you try any other CM10 variants? I'd give tdmcode's AOKP a spin. He says he might have fixed that problem you were talking about in his build.
Click to expand...
Click to collapse
I downloaded the CM10 ROM. It seems to behave slightly differently. It stays on H normally, but when I start to do something with data, it will go to H+ until the data loads, then go back to H. So far no disconnects, I'll keep you posted. Right now I have very limited data, I'm switching to T-Mobile as soon as UPS decides to deliver my SIM card (just found out they have a 1900MHz HSPA+ network in my area!) I'll be able to test it better then, but for now I'm trying to stick to wifi, especially since I wasted so much data tonight playing around with this stuff, lol.
screwregi said:
It stays on H normally, but when I start to do something with data, it will go to H+ until the data loads, then go back to H.
Click to expand...
Click to collapse
This is how it's supposed to work.
drumist said:
This is how it's supposed to work.
Click to expand...
Click to collapse
Ditto... H and 3g are subsets of each other. Namely they can handle simultaneous voice and data 4G (h+) and lte can only handle data. So it switches back to H so you can receive and make calls plus it uses less battery. If you are on either 4G techs and receive a phone call while downloading it will automatically switch to H from h+ or lte, this is why. The only way you will never see this is on an AT&T rom where it only has 4G and lte icons.
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Ditto... H and 3g are subsets of each other. Namely they can handle simultaneous voice and data 4G (h+) and lte can only handle data. So it switches back to H so you can receive and make calls plus it uses less battery. If you are on either 4G techs and receive a phone call while downloading it will automatically switch to H from h+ or lte, this is why. The only way you will never see this is on an AT&T rom where it only has 4G and lte icons.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I have LTE disabled, I'm not using the phone on AT&T.
Swetnes said:
Ditto... H and 3g are subsets of each other. Namely they can handle simultaneous voice and data 4G (h+) and lte can only handle data. So it switches back to H so you can receive and make calls plus it uses less battery. If you are on either 4G techs and receive a phone call while downloading it will automatically switch to H from h+ or lte, this is why. The only way you will never see this is on an AT&T rom where it only has 4G and lte icons.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
H+ isn't a subset of 4G is it? I know that the CM's have separate icons for 3G/H, H+, 4G, and LTE.
lordcheeto03 said:
H+ isn't a subset of 4G is it? I know that the CM's have separate icons for 3G/H, H+, 4G, and LTE.
Click to expand...
Click to collapse
That certainly is debatable but the US's largest carrier considers it to be, it behaves like 4g, H+ may not be as fast but it is 90%+ as fast in most markets small enough to not make a noticeable difference as far as people's perception and the technology behaves like LTE in a lot of respects, CM is international so it just conforms to International norms so that's why you get H+ AND 4G (LTE) designators.
Sent from my LG-P930 using xda app-developers app
I have a S3 i747 and have tried several different roms and always lose my LTE. After install it jumps back and forth between H+ and 3g it never stays on one. I have tried installing LTE fix and it does not fix problem. I also tried manually entering correct ATT setting but still nothing. I tried speedtest after to see what my speeds where and H+ is around 3mb download and 3g is around 500kb download. please can anyone help
khoury1 said:
I have a S3 i747 and have tried several different roms and always lose my LTE. After install it jumps back and forth between H+ and 3g it never stays on one. I have tried installing LTE fix and it does not fix problem. I also tried manually entering correct ATT setting but still nothing. I tried speedtest after to see what my speeds where and H+ is around 3mb download and 3g is around 500kb download. please can anyone help
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1947376
khoury1 said:
I have a S3 i747 and have tried several different roms and always lose my LTE. After install it jumps back and forth between H+ and 3g it never stays on one. I have tried installing LTE fix and it does not fix problem. I also tried manually entering correct ATT setting but still nothing. I tried speedtest after to see what my speeds where and H+ is around 3mb download and 3g is around 500kb download. please can anyone help
Click to expand...
Click to collapse
Do you still have your imei? That's located under settings, about phone, and phone status.
Sent from my SGH-I747 using Tapatalk 4 Beta
Yes it's to still there. I entered the correct settings from above post. And it still jumps from H+ to 3G
Sent from my SGH-I747 using xda premium
If that didn't fix try this
http://forum.xda-developers.com/showthread.php?t=1947376&page=27 Post: 263
mrnovanova said:
Yeah that happens when going back to a tw rom from an aokp. What you have to do is backup your current rom, restore a backup of your stock rom once you're in there go to more settings you should find the option for lte in there choose it wait for it to connect and once you're connected just restore you're rom and you should have lte.
Sent from my SAMSUNG-SGH-I747 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
khoury1 said:
I have a S3 i747 and have tried several different roms and always lose my LTE. After install it jumps back and forth between H+ and 3g it never stays on one. I have tried installing LTE fix and it does not fix problem. I also tried manually entering correct ATT setting but still nothing. I tried speedtest after to see what my speeds where and H+ is around 3mb download and 3g is around 500kb download. please can anyone help
Click to expand...
Click to collapse
Ok I can help you fix this no problem. First things first, do you have nandroid backup of your stock rom? You know that's the first thing to do before you flash right?
Carried by a Raven
Yes I have back up. I just restore phone and reinstalled rom still the same issue. Now H+ download speed .22mb
Can anyone help with this. I really want to try new Roms but don't want to lose 4g or LTE
Sent from my SAMSUNG-SGH-I747 using xda premium
This is slightly different than the guide posted above and has worked for me every time.
Go into your phone dialer. Enter *#*#4636#*#*. Go to phone information, and find the drop down menu. Select "LTE only". This should force LTE. Then you can select LTE/... Whatever one you want, and it should start connecting to LTE by default. If it didn't work, then LTE is unavailable to your phone for whatever reason.
Sent from my SGH-I747 using xda app-developers app
So if i am not in a LTE area will i still have 4g cause right now it bounces between H+ and 3g. it does not hold H+ very long then goes to 3g for few minutes then back and forth and download speeds are crap. I was getting .22MB.
Lumixz said:
This is slightly different than the guide posted above and has worked for me every time.
Go into your phone dialer. Enter *#*#4636#*#*. Go to phone information, and find the drop down menu. Select "LTE only". This should force LTE. Then you can select LTE/... Whatever one you want, and it should start connecting to LTE by default. If it didn't work, then LTE is unavailable to your phone for whatever reason.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I tried to dail *#*#4636#*#* after rom install but nothing happens
khoury1 said:
So if i am not in a LTE area will i still have 4g cause right now it bounces between H+ and 3g. it does not hold H+ very long then goes to 3g for few minutes then back and forth and download speeds are crap. I was getting .22MB.
Click to expand...
Click to collapse
If you are not in an LTE zone, you cannot connect to it. If your phone says "4G", it is referring to LTE. "H+" refers to HSPA+ which is more accurately 3.5G. If your phone is switching between H+ and 3G, it may just be corresponding with your data activity, where H+ is active and 3G is inactive. It may also be because of poor connection, which could too be why you're getting bad download speeds.
khoury1 said:
I tried to dail *#*#4636#*#* after rom install but nothing happens
Click to expand...
Click to collapse
That's strange. Try downloading this app.
https://play.google.com/store/apps/details?id=net.andirc.lteonfoff
I've been working on a fix since a long time now. If you are in SD community then you prolly know me. Anyway I was able to fix this on two of my phones and it's working fine. I tested for 12 hours now. I'll also tell you in the end what problems I'm seeing. I'm also working on a fix for that.
I noticed that a service is started when the fallback happens but if I kill that service the network also dies. But if you follow the below method it safely starts a new service which kills the one that's responsible for killing the 4G/LTE
1. Upgrade your phone to 13B firmware
2. Root 13B
3. Now download Shortcut Master lite app from play store.
4. Now add these shortcuts to your favorites in the "Shortcut Master lite app". You can search for "LTE" and click on search button
LTEBandSelection
LTETestMain
LTE System Selection
CDMAPreference
5. Now click on "LTEBandSelection" and enable all the bands
6. Save and reboot
7. You now need to enable your data and turn off your wifi. Make sure your phone is in Global mode (in settings >> Mobile networks >> System select)
8. After your phone is rebooted open "Shortcut Master lite" app.
9. Now tap on LTETestMain
10. Select Click on CDMA preference.
Now choose Band preference and select "any"
P_REV_Preference ---> "MOB_P_REV 3
This is important.. EVDO Revision --> Rev A
11. "LTE Connect w/o IMS PDN" must be checked
12. Now go back to your main menu in shortcut master lit app
13. This step is very important. Changing the timeout is important. Tap on LTE System Selection
Except "Scan duration" add a couple zeros to all the other timers. For eg: T_mpsr timer (Min) is 200
The fallback timer will reset itself after reboot. But don't worry the configuration is already updated with the new value. For some reasons the shortcut master lite app is not picking it up.
14. Now finally click on "CDMA preference" in the main menu and make sure it has the value you set in Step 10
At step 10 or 13 your network should go away and your phone should complain about "no network". That's fine. just ignore the message.
Now finally reboot your phone. That's it. You should now have 4G LTE and it won't fallback to 3G or H+
The only problem is when I'm on a call my 4G LTE is dropped to 3G/H+. But after I hang up it goes back to 4G LTE after 12 seconds. I don't know if it's an expected behavior. But I'm trying to see if there is a fix for that.
I tested this with Tmobile. Make sure your APN settings are correct.
Not working for me on Cricket (AT&T). Still will always go back to H+, 4G LTE only works when I select CDMA.
konradsa said:
Not working for me on Cricket (AT&T). Still will always go back to H+, 4G LTE only works when I select CDMA.
Click to expand...
Click to collapse
I tried it on my two phones (Both tmobile). My friend just tried it on his phone. It worked for him too.
motorhead_biker said:
I tried it on my two phones (Both tmobile). My friend just tried it on his phone. It worked for him too.
Click to expand...
Click to collapse
That's great! I hope we can figure out also what we need to do to get it to work for AT&T, I am sure it's probably just some small tweaks required.
konradsa said:
That's great! I hope we can figure out also what we need to do to get it to work for AT&T, I am sure it's probably just some small tweaks required.
Click to expand...
Click to collapse
I will try it with my roomies att sim tonight. He has a nano sim, I need to find a sim adapter.
Awesome, thank you! worked for me T-mobile.
it initially didn't work but I had to turn data off then on.
It also cycles me to 2g speed for a few seconds sometimes but that may be due to poor signal in building.
pwtzz said:
Awesome, thank you! worked for me T-mobile.
it initially didn't work but I had to turn data off then on.
It also cycles me to 2g speed for a few seconds sometimes but that may be due to poor signal in building.
Click to expand...
Click to collapse
Yeah It's due to the poor signal. I got that too. You can check your signal strength using LTE discover app.
But overall it's working fine for Tmobile. I'm gonna try and fix ATT tonight.
Is 13B the main thing in the solution? I've changed these settings before on 11A and wasn't fixed. I tried these numbers on 11A and still don't work.
Also, unless a phone supports VOLTE, it'll fall back to 3G/H for calls.
eigen said:
Is 13B the main thing in the solution? I've changed these settings before on 11A and wasn't fixed. I tried these numbers on 11A and still don't work.
Also, unless a phone supports VOLTE, it'll fall back to 3G/H for calls.
Click to expand...
Click to collapse
I tried in 11A and it didn't work for me. So I guess it needs 13B.
So I tried various combinations last night for AT&T/Cricket, but I was not able to get it to work. No matter what I tried, when I had 4G LTE, voice wouldn't work and whenever voice worked, I was back to H+.
If others are reporting that T-Mobile works reliably on 4G and nobody can figure out how to make this work for AT&T, I guess it's time to switch to T-Mobile.
konradsa said:
So I tried various combinations last night for AT&T/Cricket, but I was not able to get it to work. No matter what I tried, when I had 4G LTE, voice wouldn't work and whenever voice worked, I was back to H+.
If others are reporting that T-Mobile works reliably on 4G and nobody can figure out how to make this work for AT&T, I guess it's time to switch to T-Mobile.
Click to expand...
Click to collapse
No. Hold on. I have a solution for ATT too. I tried something last night. Actually while I was working on a solution for ATT I found that we don't even have to go through the steps I mentioned in my OP to solve the problem. It boils down to invoking a service and killing a native VZW service.
The ATT solution I have works but in low signal area 4G fades and it doesn't fallback to 3G or H+. I had to recycle data to get 3G or H+.
It's Working!!!!!!!!! Thank you!!!!!!!
You just made my life much better now!
I finally have a phone which is great and also finally have good reception!
I Love U!
motorhead_biker said:
No. Hold on. I have a solution for ATT too. I tried something last night. Actually while I was working on a solution for ATT I found that we don't even have to go through the steps I mentioned in my OP to solve the problem. It boils down to invoking a service and killing a native VZW service.
The ATT solution I have works but in low signal area 4G fades and it doesn't fallback to 3G or H+. I had to recycle data to get 3G or H+.
Click to expand...
Click to collapse
Yes, that same thing happens when you switch to CDMA mode with AT&T. Voice doesn't work then (obviously), but it also doesn't fall back to H+ automatically, when you lose 4G coverage you pretty much lose signal all together.
konradsa said:
Yes, that same thing happens when you switch to CDMA mode with AT&T. Voice doesn't work then (obviously), but it also doesn't fall back to H+ automatically, when you lose 4G coverage you pretty much lose signal all together.
Click to expand...
Click to collapse
Yeah I know. I also know why that is happening. Actually I think it's a bug in the baseband firmware. But we can fix that issue by just overriding the command that was sent by baseband firmware.
ron.r said:
It's Working!!!!!!!!! Thank you!!!!!!!
You just made my life much better now!
I finally have a phone which is great and also finally have good reception!
I Love U!
Click to expand...
Click to collapse
Lol.. rep me in SD :laugh:
konradsa said:
Yes, that same thing happens when you switch to CDMA mode with AT&T. Voice doesn't work then (obviously), but it also doesn't fall back to H+ automatically, when you lose 4G coverage you pretty much lose signal all together.
Click to expand...
Click to collapse
Do you have a working fix for AT&T/Cricket? Is it different than the T-Mobile?
motorhead_biker said:
Lol.. rep me in SD :laugh:
Click to expand...
Click to collapse
Ha! You are repped!
What root did you use? and steps?
easyroot?
did you split the file and merge it back?
I must have really bad luck or something. It doesn't work for me. The Tbsr_cdma timer resets back to 2 at reboot.
Edit: Appears to be working. Nice job!
renoob said:
Ha! You are repped!
What root did you use? and steps?
easyroot?
did you split the file and merge it back?
Click to expand...
Click to collapse
Root? I just flashed the rooted sys image. That's it. instead of copying it in the FAT32 memory card just copy it to your phone's internal and you don't have to deal with split and merge stuff
If it drops out of 4G on a call then you're talking on 1X. So no video chat, no HD voice and no voice + data?