These rom's is not any releases but only Christmas presents for all the flashjunkies on XDA.
My little contribution to the hero community
NR1. CM-6.2.0-RC0-Hero, Built this evening,well all know what it is,apps2sd etc.. + all google apps, everything included.
Wipe of all + ext partion
Flash rom
Well you know yourselves what you should do.
Here > http://www.elelinux.se/extra/CM-6.2.0-RC0-Hero-signed.zip
NR2. Gingerbread_2.3.1_r1_alpha1 This is a pure alpha, borrowed some from Lox_Dev particular solution on how to boot up
How to install then
1: Wipe of all in recovery
2: In recovery, adb shell run command
Code:
mount /system && rm -rf /system/* && umount /system
then flash the rom
3: Reboot boot and then when everything is ready
4: Reboot to recovery and flash gapps and reboot again
5: Enjoy
Rom here > http://www.elelinux.se/extra/Gingerbread_2.3.1_r1_alpha1.zip
Gapps http://www.elelinux.se/extra/gapps-mdpi-2010-10-20-signed.zip
What works in cm rom everything I tried in all cases,and in gingerbread well it's a surprise, at least it is booting up
Credits to erasmux for the kernelsource and to Lox_Dev for the gingerbread rom
Merry Christmas, I wish all
I'm the first one who will say thanx man for youuuuu good work
downloading now and i will leave my feedback soon
thanks and theres me just setting up my new rom lol , merry xmas and a biggg thank you
it gave me an error that i can't remove system/lost+found for CM7
elelinux were do i put the comand mount /system && rm -rf /system/* && umount /system ,, sorry mate a bit new to all this
and fastboot doesn't do anything just say Failed
or adb shell show me an erorr about dev/block/mtdblock3
yadabwoy said:
elelinux were do i put the comand mount /system && rm -rf /system/* && umount /system ,, sorry mate a bit new to all this
Click to expand...
Click to collapse
boot to recovery mod by power and menu and connect ur device by the usb and write in CMD in windows {7 or vista press WINDOWS Button AND R } and write cmd and press enter then write the directory to the sdk in cmd like this
cd C:\AndroidSDK\tools
Click to expand...
Click to collapse
then write adb shell and u will see this # write the command after it directly
required :
SDK
HTC SYNC
sameh_elhakim said:
it gave me an error that i can't remove system/lost+found for CM7
Click to expand...
Click to collapse
I got that. I flashed anyway and it still boots
+1 ..........
sameh_elhakim said:
it gave me an error that i can't remove system/lost+found for CM7
Click to expand...
Click to collapse
You don't need to only flash
elelinux said:
You don't need to only flash
Click to expand...
Click to collapse
sry i didn't understood what u meant
if u mean that i have to write the adb shell command so i did that and all errors above
and i tried to only flash without any command with adb shell but it's failed too
Hmm, the only problem I have is that WiFi gets stuck on obtaining an IP address.
Other than that, it's actually not too bad
sameh_elhakim said:
sry i didn't understood what u meant
if u mean that i have to write the adb shell command so i did that and all errors above
and i tried to only flash without any command with adb shell but it's failed too
Click to expand...
Click to collapse
What I mean is wipe of all(factory reset and dalvik cache), then the command don't care about the errors,then flash and reboot should work for all.
Xtiro said:
Hmm, the only problem I have is that WiFi gets stuck on obtaining an IP address.
Other than that, it's actually not too bad
Click to expand...
Click to collapse
Well as I say, pure alpha but the direction is correct in all cases. the graphics are ok,so for those who have the strength, this is a good rom to build on.
thanks for the reply , i get an error saying mount is not recognized as an internal or external comand ??
This gingerbread actually works pretty well and smooth! I also get the "obtaining address", but it scans okay.
Btw, why ADW and not stock launcher?
Keep it up, Ele
Like i said gooood work :
for who want to know whats working and whats not.:
Working
1-calls
2-SMS
3-High Speed
4-Sounds (ringtons and media )
5-u can install any application on it
6-APP2SD Working Perfectly !!!
7-Gallery 3D
Not Working :
1-WIFI
2-USB doesn't detected
3- Something is worng with Battery use in option i thing the top toolbar have some errors or something in colors
4-Camera
5-No arabic the dev. deleted it and this the worst thing in this release (only for Arabian )
6- Sensor doesn't work at all (Rotation ... etc)
i will update the post if there is anything else....Enjoy and thanx for the dev (LOX & elelinux)
i just hope to see kernel .34 for our htc hero gingerbread soon this will fix alot and gave us alot of speed i think
is it necessary to update from your 2.2.1_update1? Thanks!
Do you have plan to fix flash?
Related
Root from Paul didn't come with one, and seeing as we can't get full system access (from what i understand) im curious as to if we can actually get busybox?
The 'busybox on rooted desire' on MoDaCo didn't help at all.
I've installed bb via Titanium, yet Metamorph didn't recognise it anywhere.
Cheers in advance for help
It comes with A2SD - but you can push the busybox binary to /system while the phone is in recovery.
If you pushed bb yourself, use its absolute path (like /data/somewhere/busybox) or put its path in your $PATH to get it going. I personally, without root, put busybox in the free-to-write-to /sqlite* directory (I put * because I don't recall the full name) and it runs fine from there.
do you have a link to apps2sd & does it come with a guide as to how to install it so noobs can understand?
A2SD was taken down "temporarily".
http://android.modaco.com/content/h...ide-now-with-new-improved-easier-root-method/
Sorry
Although this still seems to work:
http://android.modaco.com/content/htc-desire-desire-modaco-com/307398/apps2sd-miniguide/
LeszekSwirski said:
Although this still seems to work:
http://android.modaco.com/content/htc-desire-desire-modaco-com/307398/apps2sd-miniguide/
Click to expand...
Click to collapse
Bare in mind I think it was taken down as (for some) it 'removed root' and also got some phones stuck in a reboot loop. Bad times.
GANJDROID said:
Root from Paul didn't come with one, and seeing as we can't get full system access (from what i understand) im curious as to if we can actually get busybox?
The 'busybox on rooted desire' on MoDaCo didn't help at all.
I've installed bb via Titanium, yet Metamorph didn't recognise it anywhere.
Cheers in advance for help
Click to expand...
Click to collapse
You didn't read to the end of that thread
* install Titanium
* run Titanium
* click the "problems" button and install Busybox
* boot into recovery
* adb shell from my Mac
* mount /system
* cp /data/data/com.keramidas.TitaniumBackup/files/busybox /system/bin
* cd /system/bin
* ./busybox --install -s .
Click to expand...
Click to collapse
By what I've read, though, Metamorph dies on its arse because of the lack of system rw access.
Loccy said:
You didn't read to the end of that thread
Click to expand...
Click to collapse
Aye, I read that, but no Mac, and I can't get to the folder where Titanium saved bb to (assuming that because it's not on the sd card in any data or the titanium folders) the phone system(?)
jayshah said:
Bare in mind I think it was taken down as (for some) it 'removed root' and also got some phones stuck in a reboot loop. Bad times.
Click to expand...
Click to collapse
Had heard about that, but I think he may be working for a solution?
From what I can remember from the rooting guide he said it was 'currently unavailable'
GANJDROID said:
Had heard about that, but I think he may be working for a solution?
From what I can remember from the rooting guide he said it was 'currently unavailable'
Click to expand...
Click to collapse
Yeah, hence it's hopefully only temporary.
GANJDROID said:
Aye, I read that, but no Mac, and I can't get to the folder where Titanium saved bb to (assuming that because it's not on the sd card in any data or the titanium folders) the phone system(?)
Click to expand...
Click to collapse
Install Titanium. Then get your phone into recovery using Paul's Linux ISO. In the Linux console (i.e. where you'll have typed ./step2.sh to get the recovery up), you should be able to do adb shell from there. Then follow my instructions from mount /system onwards.
I didn't follow Pauls guide as I only have access to Windows, so I used the lanarchy guide, which I think might have been taken from The Unlockr.
Maybe fill me in w/ bb according to that?
i am a bit ashamed to ask this but:
....
* boot into recovery
* adb shell from my Mac
* mount /system
....
boot into recovery -> ok
adb shell from mac.. ok? hm, i have macos as a seperate installation and i used it for rooting, so there is a pushfiles folder with recovery-mac.sh.. sudo ./recovery-mac.sh?
How do i mount /system then? Don't know where to navigate to find access to the sdcard . @volumes there are only my harddrive partitions, can't see the sdcard?
No idea, sorry, first time (ok, second time after root) i get in touch with adb, mac, sudo wtf?
Ok, all you need is some kind of environment where adb actually works.
Get your phone into recovery (the green menu screen) using whatever means or method you have.
Then, if you have Windows, you'll need the Android SDK. Ditto on a Mac. Anything with adb so that you can plug your device into your computer, do adb shell, and get a shell window up. Then
mount /system
onwards.
The key is that your phone needs to be in recovery before you do adb shell, otherwise you have no r/w access to /system.
ah! ok, perfect. The android sdk is on my windows computer, the push-files on my mac, that's the problem
thanks for your help!
the recovery is not the problem, but mount /system did nothing because there is no android sdk on my mac.. got it now i think.
mount system -> ok
copy busybok -> ok
when i try to install i get dozens of lines with "no such file or directory".
reboot -> phone not booting, hangs when displaying the HTC Logo omg
flash rom again?
same problem as watercool. Loads of "No such file or directory" messages.
But, I rebooted and it went through as normal, booted the OS fine.
hm, dont want to wipe again, pff..
flashed AhmgskMod mod again without wiping, everything ok now
watercool said:
mount system -> ok
copy busybok -> ok
when i try to install i get dozens of lines with "no such file or directory".
reboot -> phone not booting, hangs when displaying the HTC Logo omg
flash rom again?
Click to expand...
Click to collapse
Sounds like you missed the . off of the end of the
./busybox --install -s .
command.
You need that . if you're following my instructions.
ok, i did it with and without the "."
With the dot there was no response (so probably it installed correctly?).
Anyway it didn't boot afterwards. i will try it again
edit: ok, tried again and my phone stucks @ htc screen
i think busybox is installed but for some reason it doesn't boot (using the ahmgsk mod)
anyway, thanks for your kind help!
Ok so the ubuntu install now works on slide credit goes to eratosthene he updated all the files to make it work all other credit goes to the dev’s listed on the links provided. FYI this was tested on eugenes latest froyo rom.
1. Go to http://nexusonehacks.net/nexus-one-hacks/how-to-install-ubuntu-on-your-nexus-oneandroid/ download the ubuntu.zip file .
2. Unzip to a location on your pc to a folder named ubuntu.
3. Download the ubuntu-slide-v2 from here.
4. Unzip the ubuntu-slide-v2 to the same folder you used in step 2.
5. Create a ubuntu folder on the root of your sdcard .
6. Connect your Slide to the pc verify debugging enabled and storage disabled.
7. Adb push the files in the ubuntu folder to the /sdcard/ubuntu.
8. Then adb shell.
9. cd /sdcard then sh ubuntu.sh
Note: At this point, the scripts are now located in /data/local/bin and the mount point is /data/local/mnt
10. sh /data/local/bin/bootubuntu
11. you should now see [email protected]:/#
Note : install completed only do the following if you want to access ubuntu from android vnc app.
12. apt-get update
13. apt-get install tightvncserver
14. export USER=root
15. vncserver -geometry 480x320
16. • Run the android-vnc-viewer app and specify localhost port 5901 .
UPDATE: This is not working on CM 6 , I'm not sure why please help if you know .
That would be sooooo coool
Sent From My HTC Espresso Running Froyo Thanks to eugene373
Tried it but the install fails , may be the script or may be rights to edit the files im not that good with linux yet so im not sure .
Ok thanks, any help would be apriciated . If we can get a procedure that works ill write up a step by step for everyone and maybe make a video how to also.
Just guessing but it's probably because we don't have rw access to /system.
Until we get an unlocked bootloader it ain't happenin...
I could be completely way off though
I think you are right , if i rember most the errors where do to access issue's with files in the system folder. If it is the bootloader what would need to be done to " unlock " it ?
bled82 said:
I think you are right , if i rember most the errors where do to access issue's with files in the system folder. If it is the bootloader what would need to be done to " unlock " it ?
Click to expand...
Click to collapse
An OTA update would unlock it.
So once we get the froyo ota we should be able to follow the same process as the nexus one then ?
i would say "unlikely," i dont see how an ota would unlock the bootloader in any fashion. but i guess he might have been referencing the possibility of someone using the new ota to create an unlocked bootloader. the whole "how could the bootloader be unlocked," question bothers me, i never seem to get a straight answer
aceraider4 said:
i would say "unlikely," i dont see how an ota would unlock the bootloader in any fashion. but i guess he might have been referencing the possibility of someone using the new ota to create an unlocked bootloader. the whole "how could the bootloader be unlocked," question bothers me, i never seem to get a straight answer
Click to expand...
Click to collapse
Once there is an official OTA devs will be able to extract the keys needed to properly sign files I believe.
I thought the engineering build had an unlocked boot loader on it and once we flashed it that was that ?
Here's an updated zip for you guys. The process is generally the same as on the above-linked nexus one version, I just changed the scripts to move a few files to different places. You'll need to download ubuntu.zip from that post as well. Summary:
unzip ubuntu.zip somewhere
unzip ubuntu-slide.zip in the same place, replace all the files
make a directory called 'ubuntu' on your sdcard
adb push all the files in the zip to that directory
adb shell
cd /sdcard/ubuntu
sh ubuntu.sh
At this point, the scripts are now located in /data/local/bin and the mount point is /data/local/mnt
sh /data/local/bin/bootubuntu
You're now chrooted into the ubuntu install. Have fun.
Thanks going to try it now !!!
Does not work get attached error.
bled82 said:
Does not work get attached error.
Click to expand...
Click to collapse
I haven't tried this but based on your error, try this from the shell:
mkdir /data/local/bin
then run the ubuntu.sh again
falken98 said:
I haven't tried this but based on your error, try this from the shell:
mkdir /data/local/bin
then run the ubuntu.sh again
Click to expand...
Click to collapse
I did cd /data/local then ls and bin is listed , ran mkdir /data/local/bin failed file exists . i cant cd /data/local/bin get error cant cd to /data/local/bin
bled82 said:
I did cd /data/local then ls and bin is listed , ran mkdir /data/local/bin failed file exists . i cant cd /data/local/bin get error cant cd to /data/local/bin
Click to expand...
Click to collapse
This is some other script messed up when bin wasn't there and ended up creating a file called bin instead of it being a directory.
rm /data/local/bin
mkdir /data/local/bin
falken98 said:
This is some other script messed up when bin wasn't there and ended up creating a file called bin instead of it being a directory.
rm /data/local/bin
mkdir /data/local/bin
Click to expand...
Click to collapse
Ok getting closer , Thank you very much . Now when i ran sh .data/local/bin/bootubuntu i get error attached .
bled82 said:
Ok getting closer , Thank you very much . Now when i ran sh .data/local/bin/bootubuntu i get error attached .
Click to expand...
Click to collapse
What rom are you using? It looks like you don't have the ext3 module built into your kernel. I set my scripts up to use ext3 (more reliable, I really don't care that it eats into the life of my sd card), but many roms only have ext2. You might try uncommenting the first line of bootubuntu, and changing the ext3 to ext2 on line 10.
eratosthene said:
What rom are you using? It looks like you don't have the ext3 module built into your kernel. I set my scripts up to use ext3 (more reliable, I really don't care that it eats into the life of my sd card), but many roms only have ext2. You might try uncommenting the first line of bootubuntu, and changing the ext3 to ext2 on line 10.
Click to expand...
Click to collapse
I am running froyo using Kanged CM6 newbuild.zip from eugene373 , http://forum.xda-developers.com/showthread.php?t=721515 .
my phone flash rom sense4a tsm 3.5,after retart boot loop,and my GSM no 3G
i used terminal emulator :
> adb shell : cannot create adb
please, help, thank all . sorry my bab ENG.
What ROM were you coming from?
I just flashed this afternoon & no issues.. Did you format /system, /data, & /cache
Sent from my vivow using XDA
sjpritch25 said:
What ROM were you coming from?
I just flashed this afternoon & no issues.. Did you format /system, /data, & /cache
Sent from my vivow using XDA
Click to expand...
Click to collapse
rom unity 2.39
hboot: 6.13...
i full wipe
i live in Viet Nam
can you help me?
sugar0312 said:
rom unity 2.39
hboot: 6.13...
i full wipe
i live in Viet Nam
can you help me?
Click to expand...
Click to collapse
for GSM you need to do this
http://forum.xda-developers.com/showpost.php?p=23763367&postcount=4
andybones said:
for GSM you need to do this
http://forum.xda-developers.com/showpost.php?p=23763367&postcount=4
Click to expand...
Click to collapse
i have problem with step 3:
>adb shell :not found
please, help me,my phone retart is boot loop
are you typing adb shell in terminal emulator????
If yes..dont do that!
Start by typing-
su
sqlite3 .......
reboot
khamsakamal48 said:
are you typing adb shell in terminal emulator????
If yes..dont do that!
Start by typing-
su
sqlite3 .......
reboot
Click to expand...
Click to collapse
i typing in Terminal emulator:
# su
# sqlite3 /data/data/com.android.providers.settings/databases/settings.db 'update secure set value="3" where name="preferred_network_mode"'
sqlite3 /data/data/com.android.providers.settings/databases/settings.db: not found
# reboot : not permited
please help me!
Did you typed it on Terminal or copied n paste??
because u may have probably wrongly typed it in terminal!
once u open terminal, you will see a $ icon on the extreme left n only after that u type su that it will change to #...try it again!!
This trick surely works!
khamsakamal48 said:
Did you typed it on Terminal or copied n paste??
because u may have probably wrongly typed it in terminal!
once u open terminal, you will see a $ icon on the extreme left n only after that u type su that it will change to #...try it again!!
This trick surely works!
Click to expand...
Click to collapse
i typed accurate.
please, you help concrete, thanks.
Well...I would advice you to copy and paste in Terminal!
Or try this in adb...
Dude..this trick certainly works...since u r entering it manually there must be an input error..probably an extra space while typing it or anything like that!!
Try copy n paste...that will do the trick!
sugar0312 said:
i typed accurate.
please, you help concrete, thanks.
Click to expand...
Click to collapse
khamsakamal48 said:
Well...I would advice you to copy and paste in Terminal!
Or try this in adb...
Dude..this trick certainly works...since u r entering it manually there must be an input error..probably an extra space while typing it or anything like that!!
Try copy n paste...that will do the trick!
Click to expand...
Click to collapse
ok my phone no boot loop but no 3G
can you help,thanks!
sugar0312 said:
ok my phone no boot loop but no 3G
can you help,thanks!
Click to expand...
Click to collapse
do you have edge at all? or no data whatsoever
nitsuj17 said:
do you have edge at all? or no data whatsoever
Click to expand...
Click to collapse
ok now, my phone have 3g,because i config apn in setting.
thanks everybody!
sugar0312 said:
ok my phone no boot loop but no 3G
can you help,thanks!
Click to expand...
Click to collapse
How'd you get it to stop boot looping? I can flash ROMS, but after I reboot once it'll boot loop at lockscreen. I am on the 5.10 hboot I had to flash that ruu tho then re downgrade and root. Idk how to get my phone to where it'll allow me to reboot it without it going into an endless boot loop.
Sent from my vivow using XDA
Jayydude_SGP said:
How'd you get it to stop boot looping? I can flash ROMS, but after I reboot once it'll boot loop at lockscreen. I am on the 5.10 hboot I had to flash that ruu tho then re downgrade and root. Idk how to get my phone to where it'll allow me to reboot it without it going into an endless boot loop.
Sent from my vivow using XDA
Click to expand...
Click to collapse
We can't help you unless you explain how you flash a ROM. What did you wipe? Are you checking MD5. Are you waiting at least 2-3 minutes after first boot before unlocking?
http://android.clients.google.com/p...ned-metallica-LWX48P-from-KNX01S.98cdf4ca.zip
to update:
Go into a shell on the watch with su and...
mount -o rw,remount /dev/block/mmcblk0p15 /cache
mv /sdcard/98cdf4ca90c4693edd379d67cdcf86e283058b81.signed-metallica-LWX48P-from-KNX01S.98cdf4ca.zip /cache/98cdf4ca90c4693edd379d67cdcf86e283058b81.signed-metallica-LWX48P-from-KNX01S.98cdf4ca.zip
echo 'boot-recovery ' > /cache/recovery/command
echo '--update_package=/cache/98cdf4ca90c4693edd379d67cdcf86e283058b81.signed-metallica-LWX48P-from-KNX01S.98cdf4ca.zip' >> /cache/recovery/command
echo '--wipe_cache' >> /cache/recovery/command
echo 'reboot' >> /cache/recovery/command
reboot recovery
Nice ty
See above
abuttino said:
See above
Click to expand...
Click to collapse
I was trying to do it thought ADB I'm just new to this and I ended up re posting in the wrong thread.
Im Not new to flashing via recover on phones but on adb through commands I always feel sketchy about it.
I keep getting permission denied
Ive ran root a few times I have the drivers install right for sure not sure what im doing wrong
NUGZZ420 said:
I keep getting permission denied
Ive ran root a few times I have the drivers install right for sure not sure what im doing wrong
Click to expand...
Click to collapse
Throw an "su" command in the shell before anything else. It will only work if you're rooted.
I don't really get it how to connect via shell to my watch. Is it the same as installing apk's over adb bluetooth debugging bridge?
Could you provide further instructions how to install the update manually?
Thanks!
Kamekazegoldi said:
I don't really get it how to connect via shell to my watch. Is it the same as installing apk's over adb bluetooth debugging bridge?
Could you provide further instructions how to install the update manually?
Thanks!
Click to expand...
Click to collapse
Is your watch rooted? If not, you can't do it
No further questions thanks!
abuttino said:
http://android.clients.google.com/p...ned-metallica-LWX48P-from-KNX01S.98cdf4ca.zip
to update:
Go into a shell on the watch with su and...
mount -o rw,remount /dev/block/mmcblk0p15 /cache
mv /sdcard/98cdf4ca90c4693edd379d67cdcf86e283058b81.signed-metallica-LWX48P-from-KNX01S.98cdf4ca.zip /cache/98cdf4ca90c4693edd379d67cdcf86e283058b81.signed-metallica-LWX48P-from-KNX01S.98cdf4ca.zip
echo 'boot-recovery ' > /cache/recovery/command
echo '--update_package=/cache/98cdf4ca90c4693edd379d67cdcf86e283058b81.signed-metallica-LWX48P-from-KNX01S.98cdf4ca.zip' >> /cache/recovery/command
echo '--wipe_cache' >> /cache/recovery/command
echo 'reboot' >> /cache/recovery/command
reboot recovery
Click to expand...
Click to collapse
Worked (almost) perfect! Except, the "mv" command caused it to error out with "Invalid Arguement:Cross-Device Link" (Due to the implementation of blocked cross device linking with the mv command, bypassable by just cp'ing) Just replaced it with "cp" and the problem was solved.
Though this has already been said, the 4.4w1 insecure boot.img no longer roots 5.0.1. Probably due to incompatibilliuies, I'll work up a new rooted boot.img this weekend. Sadly looks like its going to require flashing the boot.img, not just booting it.
How do you go on a shell on your watch?
You have to have the bootloader unlocked and rooted hooked up via Modded USB cable. Then use the super tool script iin the dev section to install drivers for fastboot. Then back out to that folder make sure you not clicked on anything right click anywhere I think but I right click on the fastboot file while holding the SHIFT key and open in command window the type adb devices to make sure you hooked up right and you have accepted it on your phone Witch you must click accept the adb on your phone to accept the computer access. Once you know your hooked up right type adb shell and boom there you go.
having some trouble.
I've got shell, and then su, i've got a prompt with #
Tried the mv command, and like that other guy, got a cross link error. So i tried cp instead of mv, and now get no such file or directory...
I should mention I'm doing this from adb on Windows. Am I missing something??
Prfndhatrdofman said:
having some trouble.
I've got shell, and then su, i've got a prompt with #
Tried the mv command, and like that other guy, got a cross link error. So i tried cp instead of mv, and now get no such file or directory...
I should mention I'm doing this from adb on Windows. Am I missing something??
Click to expand...
Click to collapse
Try this its what worked for me
coming from KNX01S, but I keep running into "Status 7" with the stock recovery and "Error executing updater script" with TWRP. Anybody have any better luck flashing this?
SOLVED!: I removed the get prop lines in the beginning of the update script and sideloaded in TWRP!
If anybody would like the modified package it can be found here: https://dl.dropboxusercontent.com/u/...360/update.zip
This was not my fix only copied and pasted
NUGZZ420 said:
Try this its what worked for me
coming from KNX01S, but I keep running into "Status 7" with the stock recovery and "Error executing updater script" with TWRP. Anybody have any better luck flashing this?
SOLVED!: I removed the get prop lines in the beginning of the update script and sideloaded in TWRP!
If anybody would like the modified package it can be found here: https://dl.dropboxusercontent.com/u/...360/update.zip
This was not my fix only copied and pasted
Click to expand...
Click to collapse
That Dropbox link seems to be down, do you still have that modified TWRP zip?
Found the original post, here's the original link: https://dl.dropboxusercontent.com/u/9407677/Moto 360/update.zip
Looks like the link text got shortened when copying/pasting, but it's all good now! Thanks for sharing!
Prfndhatrdofman said:
having some trouble.
I've got shell, and then su, i've got a prompt with #
Tried the mv command, and like that other guy, got a cross link error. So i tried cp instead of mv, and now get no such file or directory...
I should mention I'm doing this from adb on Windows. Am I missing something??
Click to expand...
Click to collapse
Make sure your using "/cache" instead of "/cache/"
nissanskylinebam said:
That Dropbox link seems to be down, do you still have that modified TWRP zip?
Found the original post, here's the original link: https://dl.dropboxusercontent.com/u/9407677/Moto 360/update.zip
Looks like the link text got shortened when copying/pasting, but it's all good now! Thanks for sharing!
Click to expand...
Click to collapse
Sorry I had been running all day and beat here my own just in case it helps same zip just my own link
5.0.1 update zip Mirror https://www.dropbox.com/s/naliirhnblh6ihg/update.zip?dl=0
npjohnson said:
Worked (almost) perfect! Except, the "mv" command caused it to error out with "Invalid Arguement:Cross-Device Link" (Due to the implementation of blocked cross device linking with the mv command, bypassable by just cp'ing) Just replaced it with "cp" and the problem was solved.
Though this has already been said, the 4.4w1 insecure boot.img no longer roots 5.0.1. Probably due to incompatibilliuies, I'll work up a new rooted boot.img this weekend. Sadly looks like its going to require flashing the boot.img, not just booting it.
Click to expand...
Click to collapse
Look forward to flashing the Rooted boot.img.
Thank you for doing it.
Update Today
In past day i have update to 5.0.1 LWX48P release. Today i have received automatic update on my watch to 5.0.1 LWX48T release. I don't know what is change but in past day I noticed a problem centering of my display; after update now the display is centered
http://shabbypenguin.com/?developer=Tools&folder=Superuser
flash that in TWRP to get root
latest update: https://mega.co.nz/#!dNBnyT7Q!qtPkmgOV-jrajJAAKDLE6cQWVHyDGi3OsEwmTq5jfOU LWX48T-from-LWX48P follow OP's instructions but change teh file names
Unmodified factory images extracted from the Robin - Updated for Android 6.0.1 build 00WW_1_450 (released on 07 Oct 2016)
This is flashable zip, and it requires TWRP. Note that while the zip includes the boot.img, it doesn't include the recovery - so you can continue using TWRP if you've flashed it. If you wish to return to 100% stock, flash the included recovery.img file as well.
Download:
https://www.androidfilehost.com/f/Robin-Factory-Images
Note: If your Robin is currently unencrypted and you want it to remain that way, don't forget to flash the modified boot.img immediately after flashing the ROM, or else your device will become encrypted again.
Note:The official fastboot images can be found here: https://community.nextbit.com/t5/Tools/Nextbit-Robin-Factory-Images/m-p/10649
Disclaimer: The files and instructions provided herein are meant for users who understand and accept the risks of flashing firmware files. I will not be held responsible for any loss or damages that could occur as a result of following these instructions, downloading or flashing these files.
Good job @[deXter]! We'll get the official ones posted soon.
Thanks for posting that!
D
Nextbit_Khang said:
Good job @[deXter]! We'll get the official ones posted soon.
Click to expand...
Click to collapse
Any news Khang? Not to push, but I remember you saying your original plan was to get these out by the end of the month.
Hey @Nickamina - Foxconn is working with us, but it's been slow going. We don't have an ETA just yet, but are hoping soon we'll have the factory images available since people have been having trouble with the OTA (if they have TWRP installed).
the update zip is corrupt, i believe it so. thts why ppl keep getting error in update.
Nextbit_Khang said:
Hey @Nickamina - Foxconn is working with us, but it's been slow going. We don't have an ETA just yet, but are hoping soon we'll have the factory images available since people have been having trouble with the OTA (if they have TWRP installed).
Click to expand...
Click to collapse
i second that. did the update today. went to stock recovery. little robot and everything. got about 1/4 of the way and went to stock recovery menu. wiped data and cache thinking that it had finished the update. now i have a robin that won't boot. i did not wipe system, but the phone will not boot. any thoughts on how to get it back up and running? adb twrp and then flash stock image from this thread? any help would be appreciated.
@lordlittlebrooks yes, enter twrp and push the system image and mentioned above
D
Hi all,
I've uploaded the factory images for the new build 00WW1_19F (released on 29th March).
Please see the updated OP for full instructions.
So being a flashable zip in TWRP, would it be possible to just sideload? Or push and move to /cache/ since my data is encrypted? If so, just flash and wipe cache and I'll be golden then? Thanks!
Both sideloading and flashing from /cache should be possible, in theory. I'm currently running unencrypted so I can't confirm, so I would be interested to see what your results are.
[deXter] said:
Both sideloading and flashing from /cache should be possible, in theory. I'm currently running unencrypted so I can't confirm, so I would be interested to see what your results are.
Click to expand...
Click to collapse
Alright, well I'll do this when I get home then, seems like a more reliable way than unrooting and going back to stock to update!
The only thing that gets me is not being able to wipe dalvik through recovery though. Is it possible to wipe beforehand on terminal emulator, and then continue on through recovery by any chance?
PhlexPlexico said:
Is it possible to wipe beforehand on terminal emulator, and then continue on through recovery by any chance?
Click to expand...
Click to collapse
su
cd /data
rm -rf dalvik-cache
mkdir dalvik-cache
chmod 0771 dalvik-cache
Don't forget to reboot immediately, or else apps may start to crash and weird things will happen.
[deXter] said:
su
cd /data
rm -rf dalvik-cache
mkdir dalvik-cache
chmod 0771 dalvik-cache
Don't forget to reboot immediately, or else apps may start to crash and weird things will happen.
Click to expand...
Click to collapse
Would it be possible just to:
cd /data/dalvik-cache
rm -f *
Reboot
Could I do that since I won't have to mess with chmod as well? I mean, it's obviously no big deal but would this work too?
PhlexPlexico said:
Would it be possible just to:
cd /data/dalvik-cache
rm -f *
Reboot
Could I do that since I won't have to mess with chmod as well? I mean, it's obviously no big deal but would this work too?
Click to expand...
Click to collapse
No, because the dalvik-cache contains sub-folders.
You could rm -rf the sub-folders if you wanted to though, but that's just extra commands.
PhlexPlexico said:
Would it be possible just to:
cd /data/dalvik-cache
rm -f *
Reboot
Could I do that since I won't have to mess with chmod as well? I mean, it's obviously no big deal but would this work too?
Click to expand...
Click to collapse
I just tested this out in the terminal - you could cd to the dalvik-cache folder and run "rm -rf *". This will get rid of all the files and subfolders in the dalvik-cache folder, and you don't have to mess with the permissions.
[deXter] said:
I just tested this out in the terminal - you could cd to the dalvik-cache folder and run "rm -rf *". This will get rid of all the files and subfolders in the dalvik-cache folder, and you don't have to mess with the permissions.
Click to expand...
Click to collapse
Oh perfect! Thanks!
[deXter] said:
I just tested this out in the terminal - you could cd to the dalvik-cache folder and run "rm -rf *". This will get rid of all the files and subfolders in the dalvik-cache folder, and you don't have to mess with the permissions.
Click to expand...
Click to collapse
Sorry about the double post, but here's an update so far. Gonna try sideloading next but when I tried to move it to cache adb spat out an error stating: failed to copy 'update.zip' to '/cache//update.zip': No space left on device
So yeah, will try sideloading in a little bit here!
Alright! Went through sideload and so far success! Here's the steps that I did:
1) Get Terminal Emulator
1.a) su
1.b) cd /data/dalvik-cache/
1.c) rm -rf *
1.d) reboot recovery
2) Navigate to sideload feature (Advanced -> ADB Sideload)
3) On PC (got superSU back because I like my root)
Code:
G:\Users\XXXX\Downloads>adb sideload update.zip
Total xfer: 1.00x
G:\Users\XXXX\Downloads>adb sideload BETA-SuperSU-v2.68-20160228150503.zip
Total xfer: 1.56x
G:\Users\XXXX\Downloads>
Afterwards, wiped cache from recovery, and rebooted! Now just optimizing apps! May install xposed here after all is said and done, but seems to be golden! Thanks Dexter! You may have to teach me how to create some of these update zips!
Sorry, dumb question that everyone hates. I'm currently rooted, unencrypted with TWRP installed: is it possible to just dirty flash over the top of my current ROM and not lose my system data without losing everything and then flash the no-encryption zip?
Thanks a lot.
mnp said:
Sorry, dumb question that everyone hates. I'm currently rooted, unencrypted with TWRP installed: is it possible to just dirty flash over the top of my current ROM and not lose my system data without losing everything and then flash the no-encryption zip?
Thanks a lot.
Click to expand...
Click to collapse
Yep you can dirty flash. Just make sure you flash the no-encryption mod, followed by supersu immediately after (in that order).