How many hinges? - G2 and Desire Z Q&A, Help & Troubleshooting

I just got my Desire Z (and I'm loving it)
The hinges are lose, like what seems to be almost everyone elses. It doesn't bother me too much at the moment as I don't hold my phone in stupid positions (although a bit worried about what will happen over time), but anyway...
I've noticed my phone only has 1 set of hinges (one on each side) and a little ribbon connector type thing, but on Youtube videos people seem to have 2 sets of hinges (2 on each side)
Is this a Desire Z/G2 type of thing, or is one a newer version or something?
Also, can I send it back to who I got it from (Dial-a-phone) and get a brand new replacement, or will I (or DAP) need to send it off to HTC to repair?
Anyone sent theirs back, and how long did it take to get it back?

LooieENG said:
I just got my Desire Z (and I'm loving it)
The hinges are lose, like what seems to be almost everyone elses. It doesn't bother me too much at the moment as I don't hold my phone in stupid positions (although a bit worried about what will happen over time), but anyway...
I've noticed my phone only has 1 set of hinges (one on each side) and a little ribbon connector type thing, but on Youtube videos people seem to have 2 sets of hinges (2 on each side)
Is this a Desire Z/G2 type of thing, or is one a newer version or something?
Also, can I send it back to who I got it from (Dial-a-phone) and get a brand new replacement, or will I (or DAP) need to send it off to HTC to repair?
Anyone sent theirs back, and how long did it take to get it back?
Click to expand...
Click to collapse
The top hinge on the ear piece side should have a single one-arm hinge and the bottom side near track pad side should have a single two-arm hinge with a display ribbon closer to the top arm in the middle. Thats how all the phones come.

joemm said:
The top hinge on the ear piece side should have a single one-arm hinge and the bottom side near track pad side should have a single two-arm hinge with a display ribbon closer to the top arm in the middle. Thats how all the phones come.
Click to expand...
Click to collapse
Oh right, lmao I didn't see that, I kept looking from the same end (didn't think it would be 2+1
My bad.
Any input on returning it though?

LooieENG said:
Oh right, lmao I didn't see that, I kept looking from the same end (didn't think it would be 2+1
My bad.
Any input on returning it though?
Click to expand...
Click to collapse
I bought mine from Radio Shack and returned it thru Tmobile for a warranty replacement, so if its for warranty try who you bought if from. If they wont do a warranty replacement im sure Tmobile will do any warranty replacement for you. But if your returning it because you dont want it anymore you probably need to go thru who you bought it from.

Related

what's the gap2 the left of optical for?

anyone else noticed this?
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk
the gaps between the optical pad and the menu button (left) and the back button (right) are equal on my device.
Not sure I know what you mean
There seems to be a little gap between actual trackpad button and the edge of the hole it sits in. If I am thinking the same way you are, look at the pictures -
http://www.phonearena.com/htmls/image.php?m=Articles.Images&f=name&id=28531&caption=&title=Image+from+%22MWC+2010%3A+Live+Report%22&kw=&popup=1
http://www.gsmarena.com/showpic.php3?sImg=reviewsimg/htc-desire/review/phone/gsmarena_002.jpg
http://www.phonearena.com/htmls/image.php?m=Articles.Images&f=name&id=28526&caption=&title=Image+from+%22MWC+2010%3A+Live+Report%22&kw=&popup=1
Now I don't think it is a factory defect because mine doesn't sit "right in the middle".
Yeah, one of the first things I noticed. *shrugs*
eViL D: said:
Yeah, one of the first things I noticed. *shrugs*
Click to expand...
Click to collapse
Thank goodness I am not the only one
Also...now that I am thinking about it, couldn't people living in the U.S. now get some sort of warranty help through HTC U.S.A.? Since U.S. Cellular is going to be carrying the Desire, it would only make sense that the United States division of HTC could possibly offer some sort of warranty help
(I remember reading through the white warranty booklet that came with my Desire, and it said that HTC offers a 2 year warranty)
No gap on my Desire.... :/
Obviously this is down to manufacturing tolerances, if you make sure you always push it slightly to the left when ever you "click" It'll probably be central after a couple of weeks
Mine is in the middle too. Tolerances....
my one got a gap too.
but I hardly ever use the optical trackpad other than taking picture so don't bother me much.
I think its bcoz of the chin design the button is a bit misaligned.
Got no gap here, i'd think its manufacturing tolerance to.
Mines got a slight gap on the left as well, seen two other Desires which have the same, no biggie really, it still works fine and is only ever really noticeable when in a dark place and the backlight is on.
my optical has now malfunctioned see my other post

[Q] xperia play disassembly guide?

Hello!
Has anyone seen a disassembly guide / dismantlling guide for an xperia play? I have had a quick look and havent seen one. A video one would be really good and one that looks at the digitizer / glass would be best for me as I seem to have broken mine already, oops!
Cheers
That sucks.
If you have Rogers they have a replacement policy. I would try that before you take it apart. Good luck. I haven't seen any guides yet. It is a pretty new phone.
You have a teardown here, it may be useful: http://www.ubmtechinsights.com/teardowns/sony-xperia-play-teardown/
I have found this, but would still like to see a video if one exists?
http://www.repairyourmobile.net/sony-ericsson-disassembly/sony-ericsson-xperia-play-disassembly/
Cheers
You can get a brand new OEM Sony Ericsson Touch Digitizer Screen on eBay from here: http://cgi.ebay.ca/OEM-Touch-Digiti...ultDomain_0&hash=item27bb11025c#ht_4868wt_905
I just ordered an OEM Xperia PLAY Black Housing Set from them and it's on its way. Funny how those "takedown" photos don't show you how they disconnected the sliding screen from the gamepad base. I got stuck at that part and have no idea how they were able to remove it. LOL
Rogers replacement policy doesn't give you the same model.... They have designated refurbished models available at no cost per person per life... You can only use it once... Unless the customer support was lying to me, that is what she told me.
Sent from my R800i using XDA App
Have you dealt with rogers before? The have no issue flatout lying to your face. I cant tell you how many times I got screwed over by those ****ers. So I get the feeling you'd be SOL
Sent from my R800i using XDA App
The only reason I switched over to Rogers was to get the Xperia PLAY for $99.99 on a 3 year agreement. I've been with Fido eversince and even though they're owned by Rogers now, I can say that Fido deals with their customers way better than Rogers does. When my 3 year agreement is done I'm going back with Fido. I already network unlocked my Xperia PLAY so if I still have it by then all I have to do is get a Fido SIM card.
Xperia Play disassembly pictures
Hey,
I am in the middle of taking apart my Xperia Play to replace the screen. Now, I got everything separated and taken apart except the screen half. I am having problem removing these silver rivets, which look like screws with a covering but the covering doesn't peel/come off. I have attached pictures of these in hopes that someone knows how to remove them.
Additionally, if anyone has experience replacing an Xperia Play screen, I'd love the advice.
Thanks in advance.
McD
Screen
Hi
Dont take the rivets OFF! If you just slide the control pad part off the metal casing you can get to the 2 screws you need to get to.
I have just finished replacing my screen and it is the scariest screen i have ever replaced as you need to go from back to front lol
I have attached a pic of my finished product, sorry i should of taken photos during it but i was shaking lol
Flava0ne said:
The only reason I switched over to Rogers was to get the Xperia PLAY for $99.99 on a 3 year agreement. I've been with Fido eversince and even though they're owned by Rogers now, I can say that Fido deals with their customers way better than Rogers does. When my 3 year agreement is done I'm going back with Fido. I already network unlocked my Xperia PLAY so if I still have it by then all I have to do is get a Fido SIM card.
Click to expand...
Click to collapse
I desperately hope that you did not get locked down to a 3 year agreement to just get this phone. As fun as this phone is (and likely to be used long past when I get another phone, just for Emulators and random games), it is not worth a 3 year contract. 2, I can understand. 1 would be more proper. 3 years is nuts in this industry. They have made back their offset of cost within 1.5 years usually.
Video!!
Hi
For anyone else who might benifit from this, here you go:
http://www.youtube.com/watch?v=-3n5ZfkqhzE
Edd
eddieo said:
Hi
For anyone else who might benifit from this, here you go:
http://www.youtube.com/watch?v=-3n5ZfkqhzE
Edd
Click to expand...
Click to collapse
Thanks for that video link, I think it'll really help other people who might need to do some repairs on their own to their Xperia PLAY. I just wish that I came across that video earlier when I had to disassemble mines, I was so nervous when I was doing it cause all I had to go by where those pictures posted earlier and it left out a whole lot that I had to figure out myself.
Replacing Digitizer
Hello, Flava0ne
Do I have to take entire phone apart to replace digitizer? Is there simpler way to do it? Screen is fine - only digitizer is broken. Can it be removed from the top or bottom top access only?
Thank you
WOW sorry, too many tabs open. Wrong topic!!!
(Disregard this post)
Two questions: How far can you go without breaking a warranty seal and how many internal water damage indicators / liquid sensors are there? I just need to check since they are threatening $300 if they find anything and I work in the cold and frequently see condensation. I do avoid condensation actively and don't even allow it in the bathroom when showering.
---------- Post added at 03:01 PM ---------- Previous post was at 02:03 PM ----------
OK, I went as far as I dared by completely taking apart the bottom piece (gamepad, camera, microSD slot, SIM slot, headset/remote jack, primary and secondary microphone, antennas, speakers, microUSB, etc) and, so far, I have found three. It was pretty easy up to this point and I didn't notice any kind of warranty seal.
I just removed all T6 screws from the back and lifted the catches along the bottom (headset/microUSB) side using my fingernail. One corner should be loose and you can start there and slide with no marring (didn't need my plastic pry tool). I don't know why, exactly, but the internal L & R switches are stuck to black adhesive films covering openings in this black piece but I was able to lift and unstick them without touching the films. Anyway, when you remove and flip this piece over, you should see a white square just below the mSD and SIM card slot. It's actually visible through a pinhole on the other side. If it's pink/red, you've got a problem, even if it's caused by condensation (they will still void your warranty for "water damage"). When I touched it, a plastic film on the back slipped off but stuck back on. The whole thing seems like it peels off quite easily.
Anyway, I would wiggle the power button loose before moving on. Next, there are now two tiny cross-head screws that I used a PH00x50 driver on. Yes, one of them was clearly accessible as soon as you removed the battery, but why remove it until you are ready to remove both? Once those are out, let the headphone jack dangle off its ribbon cable and lift the PCB enough to disconnect the display connector from the PCB... just stick something wide and flat in there and twist. Be careful not to damage the tiny ribbon cable that connects the touchpad area from the gamepad because it still needs to be disconnected. Now, this is OPPOSITE of how many larger but similar connectors work, so pay attention: To disconnect it, locate the tiny darker-colored flap of plastic on the opposite side of the connector from where the cable goes in. Lift it from the opposite side toward the side where the cable inserts. It will stand straight up and then you can slide the cable out. If you have to remove it, the headphone/remote jack appears to work the same way.
Anyway, this should completely free the PCB and leave the gamepad shell attached to the display. The gamepad shell should be free from the front half of the phone now as well, leaving only the sliding metal mounting bracket.
Now, a couple of interesting things here: I can clearly tell that one of the T6 screws by the volume button was protruding too far and caused a visible sliding scratch on the underside of my top shell. It may make sense to loosen these a bit on a new phone before this happens. You can also see if imperfections in the white Teflon sliding bumps are causing scratches on the front (my first phone did not, my second did in no time).
Now, let's go back to the gamepad faceplate. The buttons should easily fall out if you want them too, but I was only interested in finding the water sensors and here are two more: one is right by the microphone hole and the other in diagonally opposite under the Playstation Certified logo. They look identical to the one on the back piece.
I'm sure that there is at least one in the LCD assembly as well, but mine is well sealed and I didn't want to lift any of those silvery-gray stickers covering the screws when I have a warranty replacement on the way. I've gone far enough to satisfy my curiosity.
---------- Post added at 03:51 PM ---------- Previous post was at 03:01 PM ----------
A couple notes on re-assembly:
As expected, it's a bit more difficult, especially because you don't have leverage to reconnect the display when it is in place. The last fold of the cable it supposed to fit UNDER the metal bracket and the slide mechanism doesn't really work if it isn't (a certain panel will not slide back if it is not folded under). I'm not sure how it affects it but it does. You will need a thin, long, flat utensil like a plastic butter knife or something to either A) provide leverage to connect the connector or B) tuck the cable back under the bracket after connecting it. You need to have already connected the touchpads and oriented the gamepad faceplate around/under the bracket, though it will not be secured. The phone also needs to be in the open position. When you tuck the cable under, slide it to the closed position and back. If the cable seated properly, the PCB and gamepad faceplate should sit pretty flat and should no longer be falling off of the bracket even though it isn't really secured.
The D-pad needs to be arranged properly as well. One side is cut. If you look closely, there are three holes in the four inner corners that align with three plus-shaped pegs, so you can't get it wrong if you pay attention.
The power/lock button isn't going to stay in place until you secure the bottom housing, so leave it off until just before you are ready to do that to avoid losing it.
Be careful not to seal dust in the camera lens. Don't forget to put the cross-head screws back before you do the back housing because you can't easily access one. Remember to keep the four black screws by the L, R, and volume buttons a little loose if you had a problem with them scratching the other half of the phone.
Be sure to download the Xperia Play test program from the Google Market and verify that all buttons and touch inputs function properly.
I'll be sure to wear my Looxcie next time.
I feel sorry for you blokes taking apart the xperia
it's going to be a royal pain in the ass. especially when you reach that "point"
the point where you have **** all over the table and you are like god how did i get this deep into disassembly
then the part when you are shaking / nervous about breaking a part, or worse yet. you end up breaking it. i would be real scared lol.
all i can say is go real slow. REAL slow
and if anything wont move. dont force it lol
Hogwarts said:
I feel sorry for you blokes taking apart the xperia
it's going to be a royal pain in the ass. especially when you reach that "point"
the point where you have **** all over the table and you are like god how did i get this deep into disassembly
then the part when you are shaking / nervous about breaking a part, or worse yet. you end up breaking it. i would be real scared lol.
all i can say is go real slow. REAL slow
and if anything wont move. dont force it lol
Click to expand...
Click to collapse
Maybe I've just taken apart too many laptops and gadgets before but I never felt that way when I got the back piece completely apart... or maybe "that point" is only after you get into the front assembly. I did the rear in bed with the screws laying on the covers beside me and didn't even lose the arrangement of a single one.
Anyway, moments after getting my RMA replacement shipped email notification this morning, I dropped my R800at that is supposed to be getting sent back and now the touch digitizer is shattered. I've ordered a replacement but I'm hoping that I'll be sending it back with the original from the RMA replacement. Does anyone know if the R800a or R800at will fit a R800 Z1i chassis? These are all over eBay. Also, is there any tamper seal? I understand that there are screws under the silver/gray stickers on the front piece but those look easy enough to reapply.
Did I mention that they wanted to turn my RMA down for the flaking paint on the front buttons alone? The night before I called to RMA for an alarm issue (two days ago), the battery door cracked right at the pry point. I remove it more often than most because I carry a second official battery and a Sony Ericsson EP900 charger, so it failed under normal wear-and-tear, but they wanted to say that I couldn't RMA for my main issue (alarm dismisses itself) because of that EVEN THOUGH THE RMA UNITS DON'T INCLUDE A BATTERY COVER!
Damn. Sony Ericsson can be picky. I babied the thing and only just now dropped it. Perhaps AT&T is a little too cautious with the terms of Sony's warranty (it is processed through them but the rules come from Sony).
CZroe said:
Maybe I've just taken apart too many laptops and gadgets before but I never felt that way when I got the back piece completely apart... or maybe "that point" is only after you get into the front assembly. I did the rear in bed with the screws laying on the covers beside me and didn't even lose the arrangement of a single one.
Anyway, moments after getting my RMA replacement shipped email notification this morning, I dropped my R800at that is supposed to be getting sent back and now the touch digitizer is shattered. I've ordered a replacement but I'm hoping that I'll be sending it back with the original from the RMA replacement. Does anyone know if the R800a or R800at will fit a R800 Z1i chassis? These are all over eBay. Also, is there any tamper seal? I understand that there are screws under the silver/gray stickers on the front piece but those look easy enough to reapply.
Did I mention that they wanted to turn my RMA down for the flaking paint on the front buttons alone? The night before I called to RMA for an alarm issue (two days ago), the battery door cracked right at the pry point. I remove it more often than most because I carry a second official battery and a Sony Ericsson EP900 charger, so it failed under normal wear-and-tear, but they wanted to say that I couldn't RMA for my main issue (alarm dismisses itself) because of that EVEN THOUGH THE RMA UNITS DON'T INCLUDE A BATTERY COVER!
Damn. Sony Ericsson can be picky. I babied the thing and only just now dropped it. Perhaps AT&T is a little too cautious with the terms of Sony's warranty (it is processed through them but the rules come from Sony).
Click to expand...
Click to collapse
I've always said this phone is cheaply made and now i have more proof
mine came brand new out of the box with a blemish on the screen
I'm not picky so i just kept it.
Its a blemish in the LCD screen not the digitizer or glass
and yeah the cheap ass plastic assembly is not helping either.
they should have used aluminum or something. more durable
OK, so I finished the job. I did not see any more water indicators in the top shell and I did not find a single tamper-resistant label in the entire device. I left the slider assembly intact (I think it's riveted) and I didn't peel the flex PCB out of the top shell or off of the touchoads, but it was what anyone would consider "fully disassembled." I seem to have misplaced my camera but video will be coming when I find and edit it.

Screen glass coming off?

I recently realized that the glass on the screen is coming off slightly from the top left corner. I never drooped the phone it never got a hit no nothing.
Any one noticed something similar ?
Sent from my Galaxy Nexus
b1ck132 said:
I recently realized that the glass on the screen is coming off slightly from the top left corner. I never drooped the phone it never got a hit no nothing.
Any one noticed something similar ?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Can you get a picture?
Well I tried but its quite hard.
The glass is supposed to be onside the chassis and well it is for the 70% of the phone.
But half of the right side and especially the right top corner, you can feel it is off by a bit, and when you press slightly it goes in where its supposed to but doesnt stay there.
It is as if the adhesive of the glass isnt holding on the corner any more.
Sent from my Galaxy Nexus
b1ck132 said:
Well I tried but its quite hard.
The glass is supposed to be onside the chassis and well it is for the 70% of the phone.
But half of the right side and especially the right top corner, you can feel it is off by a bit, and when you press slightly it goes in where its supposed to but doesnt stay there.
It is as if the adhesive of the glass isnt holding on the corner any more.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I would bring that back to where you bought it, fire it across the counter and request a new one! It's obviously a faulty built one.
jd1001 said:
I would bring that back to where you bought it, fire it across the counter and request a new one! It's obviously a faulty built one.
Click to expand...
Click to collapse
This^^^
Take it back and get new phone.
jd1001 said:
I would bring that back to where you bought it, fire it across the counter and request a new one! It's obviously a faulty built one.
Click to expand...
Click to collapse
Here's your sign
TNS201 said:
This^^^
Take it back and get new phone.
Click to expand...
Click to collapse
This.
Who started THIS vile trend of replying with "This." Is it cool or something? I dunno, just figured I'd try it out. Will report back on my findings.
Been more than a month that i bought it.
And can't demand an exchange, got a friend buy it in UK and bring it over here. No way to take it back to UK for a while.
Was just wondering if it happened to someone else, or if someone had any recommendations about what ppssibly could cause this or how i could possibly fix it.
It's been perfectly normal for weeks ;(
Sent from my Galaxy Nexus
b1ck132 said:
Been more than a month that i bought it.
And can't demand an exchange, got a friend buy it in UK and bring it over here. No way to take it back to UK for a while.
Was just wondering if it happened to someone else, or if someone had any recommendations about what ppssibly could cause this or how i could possibly fix it.
It's been perfectly normal for weeks ;(
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Are you positive it didn't get exposure to excessive pressure? That is the only logical way the glass would start to "pop" out! It's a strange one, never heard anything on these forums that is similar.
Yeah I am pretty positive, I baby my phones, my nexus one is still without a scratch.
That is why I felt the need to create a topic, since I never heard of something similar on any of the phones I owned/followed.
Sent from my Galaxy Nexus
the bottom left of my phone started making a weird clicking noise every time I squeezed it, then I looked at it and the glass was coming off just a tad, I went back to the store and 5 of them that came out were doing the same thing, try your self, squeeze the bottom left of your phone.
b1ck132 said:
I recently realized that the glass on the screen is coming off slightly from the top left corner. I never drooped the phone it never got a hit no nothing.
Any one noticed something similar ?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
was your GN made it china by any chance?
It should have a 1 year warranty against manufacturing defect. If there are no marks on it from a drop, they should replace that no questions asked. If the retailer wont take it, call Samsung.
Are you sure you don't mean the bottom right?
That corner actually is a tad higher than the other corners.
Nope my issue is on top left.
The international warranty doesnt include exchanges. If there is a manufacturing defect then the device should be sent to the country that it is bought in.
At least that is what the warranty card in tge box says.
Sent from my Galaxy Nexus
Hi,
I had similar issue but located in the bottom-right corner of the phone. What I did was a bit risky but I just pressed the glass into the chassis a few times and it went in place. After this it looked perfect. Of course I can't guarantee the result, this is how I made it, of course this is not a professional way to repair things like that .
This is another time I have to write that something wrong is happening with Samsung's quality control. Quantity over quality, definitely. This is not an isolated case, I have read other posts where people were complaining about this, out-of-center camera sensor placement, clicks from the speaker, bad screen etc, not to mention the famous volume rocker bug. When you buy a phone for $700 you at least demand no obvious, visible defects.
I'm also having this issue on my phone, except that the screen is coming off on the left bottom part of the phone.
This was a replacement phone for the first one that was exchanged as DOA because of screen discoloration.
Went to the shop today and the sales rep was giving me attitude ("are you sure it isn't supposed to be like that?") and told me to return on Monday when the manager was there. Have to say I'm not really feeling the charm of Nexus at this point anymore. The iPhone might be fragile and limited, but at least the production quality is top notch...
Cmmts said:
I'm also having this issue on my phone, except that the screen is coming off on the left bottom part of the phone.
This was a replacement phone for the first one that was exchanged as DOA because of screen discoloration.
Went to the shop today and the sales rep was giving me attitude ("are you sure it isn't supposed to be like that?") and told me to return on Monday when the manager was there. Have to say I'm not really feeling the charm of Nexus at this point anymore. The iPhone might be fragile and limited, but at least the production quality is top notch...
Click to expand...
Click to collapse
Have you ever gone to any iphone forums and read problems iphone users have with hardware or software? Stuff happens with anything electronic that is mass produced. Every now and then you will have something that is not like it should be.
Let's not turn this into an iPhone vs Android battle =p
Each phone is graeat, for the ones that love them, each have flaws each have great parts.
Anyways, it appears that this is not an uncommon problem, and I think it is unlikely it will be causing much of a problem in the long term.
I'm pretty positive that the problem is caused by the adhesive holding the glass, not powerful enough, or not put enough at certain areas to hold on to it after a while.
It's not like, it's making the phone unfunctional or anything. I was wondering if it was only me having the problem, and appears not.
This is the 3rd Nexus phone Google had a say in, and all 3 had huge flaws somehow, which is tragic. Maybe G, should be more careful with choosing it's partners =)
wonshikee said:
Are you sure you don't mean the bottom right?
That corner actually is a tad higher than the other corners.
Click to expand...
Click to collapse
Is that how its supposed to be ? My bottom right corner is higher than the benzel, all other corners are a hair below(if looking at in portrait). Being 4 days old planning on going to store to get replacement, seems this would affect a screen protector that i havent installed yet..

Pressing the screen

When I press my HOX screen at some pressure at the bottom it gives some color inside. Whether this is a problem?
Sent from my HTC One X using Tapatalk 2
Put some pressure on your monitor (Providing it's an LCD or similar). What do you see?
Why are you pressing a capacitive screen in the first place??
This is a problem, the glas should never touch the lcd.
And why press capacitive touchscreen? While playing games and caught up in the action? Since it is a tegra3 phone, chances are big
Just did a test . Whether the phone can withhold pressure inside the tight jeans and under the pillow while sleeping.
Sent from my HTC One X using Tapatalk 2
Get yourself a hot chick if u are that much into pressing..but please don't take it out on our lovely One X
Thread closed...
Sent from my Stunning White HTC One X
Techimplant said:
Get yourself a hot chick if u are that much into pressing..but please don't take it out on our lovely One X
Thread closed...
Sent from my Stunning White HTC One X
Click to expand...
Click to collapse
just noticed that mine now as well has that creak on the left hand side..basically when i press the left hand side i can feel it not being in the right place and it makes a noise when i push it down..right side is fine. spoken with my carrier and they said they can not replace it they need to send it to get worked on...and then once i send it they get a quotation of £20 and if i accept then they will try and fix it..i declned that and said you must be joking. spoke to HTC and they said they can not replace it but send it in for repairs..i do not mind that as long as they do not charge me..but they said the carrier should replace it if i am getting dust under the screen...here is hoping..dissappointed..as i really like this phone and already spend like few bucks getting cases for this phone S3 looks more and more appealing now...
Goku80 said:
S3 looks more and more appealing now...
Click to expand...
Click to collapse
And if you don't think it too is going to have its own set of anomalies and QC issues you're a tad naive. Go check out the GN forum, it's the last phone Samsung released. It's a great phone but far from perfect. As is the One X. And as will be the SGS3.
BarryH_GEG said:
And if you don't think it too is going to have its own set of anomalies and QC issues you're a tad naive. Go check out the GN forum, it's the last phone Samsung released. It's a great phone but far from perfect. As is the One X. And as will be the SGS3.
Click to expand...
Click to collapse
s2 came out never had any issues with that Barry mate. Look i do not want to turn this into a flame war..We both know how it was last week. Nah after clearing my head now i have two options.
One i am waiting an answer from HTC till tomorrow afternoon they said whether they will replace it for me or send it for repairs. If they say they will replace it i have a winner. If they say they will send it for repairs then i will go with my network provider. At least if they fix it i know i shall not have the issues as it will come back brand new.
And the good thing i am covered by warranty as it is the stupid flex issue that everyone is facing..Damn thing creaks like hell when you press on it
fallenwout said:
This is a problem, the glas should never touch the lcd.
And why press capacitive touchscreen? While playing games and caught up in the action? Since it is a tegra3 phone, chances are big
Click to expand...
Click to collapse
I thought there was meant to be no air gap between the glass and the One X screen!?!?
Goku80 said:
s2 came out never had any issues with that Barry mate.
Click to expand...
Click to collapse
I had one of the first SGS2's sold in the UK. It was a train wreck. Here's a list of issues I can remember:
1) Devices overheating to the point they shut down
2) Huge color temperature variations in the displays
3) Wireless (both Wi-Fi and 3G) that was so screwed up Samsung was pushing out updates weekly
4) Fingerprints on the inside of the display
5) USB ports that released and got pushed up in to the phone
6) Flashing covering the camera lens from inside
7) Light showing through from the edges of the bezel
8) Bad headphone jacks
If you had one at launch you have either short or selective memory. After about two months all the QC issues went away and we all know how great a phone the SGS2 ended up being. I kept mine for eleven months; the longest I've ever kept a phone. The point being, no phone is immune from issues especially when they first come out.
BarryH_GEG said:
I had one of the first SGS2's sold in the UK. It was a train wreck. Here's a list of issues I can remember:
1) Devices overheating to the point they shut down
2) Huge color temperature variations in the displays
3) Wireless (both Wi-Fi and 3G) that was so screwed up Samsung was pushing out updates weekly
4) Fingerprints on the inside of the display
5) USB ports that released and got pushed up in to the phone
6) Flashing covering the camera lens from inside
7) Light showing through from the edges of the bezel
8) Bad headphone jacks
If you had one at launch you have either short or selective memory. After about two months all the QC issues went away and we all know how great a phone the SGS2 ended up being. I kept mine for eleven months; the longest I've ever kept a phone. The point being, no phone is immune from issues especially when they first come out.
Click to expand...
Click to collapse
i must of been one of the lucky ones then well whatever happens if the phone does not get replaced or if i send it in and they can not fix the issue i will just stick a case on it and not flex the damn thing..but knowing it is there will bug me
Goku80 said:
i must of been one of the lucky ones then well whatever happens if the phone does not get replaced or if i send it in and they can not fix the issue i will just stick a case on it and not flex the damn thing..but knowing it is there will bug me
Click to expand...
Click to collapse
If you think about it, the devices we're buying today are about 1000% more complicated than just two years ago. A lot more advanced crap is being pushed in to a smaller space. At the same time, what we're willing to pay at the high-end is kind of fixed so the manufacturers have to juggle all of that while putting out phones at twice the frequency. My biggest ***** with all of them is the obvious lack of testing that takes place. I can forgive some of the QC issues (provided they go away eventually) but the flickering thing is kind of hard to overlook. As was the GN 2G radio problem. Alas, I think it's going to get worse before it gets better. It'll be interesting to see how Samsung fares with the SGS3. People's expectations are so high I think it'll be hard to meet them.
BarryH_GEG said:
Alas, I think it's going to get worse before it gets better. It'll be interesting to see how Samsung fares with the SGS3. People's expectations are so high I think it'll be hard to meet them.
Click to expand...
Click to collapse
Spot on mate spot on. What would you advise to do mate? I mean phone is fully functional and nothing wrong with it. It is just that gap on the left hand side which is not really visible unless you really look at it and then when you press hard on the left you can feel the phone creaking and trying to adjust the shell to get in place.

Screen gap

I read about screem gap but i was unsure what exactly was meant. I just took a closer look and found out that there is a tiny gap between my screen and phone on top in which dirt fills in and it pisses me off. I havent dropped my screen once and if i push the top left part of my phone i can hear a sort of "click".does that make my phone faulty? Im really annoyed vy the dirt that fills in... Apart from rhat phone has no problems.
shadehh said:
I read about screem gap but i was unsure what exactly was meant. I just took a closer look and found out that there is a tiny gap between my screen and phone on top in which dirt fills in and it pisses me off. I havent dropped my screen once and if i push the top left part of my phone i can hear a sort of "click".does that make my phone faulty? Im really annoyed vy the dirt that fills in... Apart from rhat phone has no problems.
Click to expand...
Click to collapse
send it back. that is what i am doing. left hand side of the phone between the screen and the plastic you can see dust getting inside there to. plus if you press the left hand side tad hard you can hear it creaking as well. i called HTC to see if they could replace it for me straight away without sending it for repairs..waiting for an outcome tomorrow...if they say no i will just send it for repairs and hope they find the problem and either fix it or replace it then...i know it will drag for a week but at least that way you know one way or the other it will get fixed...
i was going to say if it does not bug you then leave it..but you sound just like me that even though the phone works fine it will bug you cause you know it is there
should i go to my provider or directly cpntact htc? And just to understand it better. Gaps are not supposed to be there, am i right?
shadehh said:
should i go to my provider or directly cpntact htc? And just to understand it better. Gaps are not supposed to be there, am i right?
Click to expand...
Click to collapse
Dont replace it as you have no other problems. Go to HTC repair center and just fix it. If you replace there may be a chance of getting more faultier one.
Sent from my HTC One X using Tapatalk 2
Living in austria, where to check for such a repair center?
forumhookersdotcom said:
Dont replace it as you have no other problems. Go to HTC repair center and just fix it. If you replace there may be a chance of getting more faultier one.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
have to agree with that as well. but at the same time new batch of phones get send out so you never know. just go to HTC site and do a locator for your country my friend
shadehh said:
Living in austria, where to check for such a repair center?
Click to expand...
Click to collapse
Have a look at this . May be useful
http://www.htc-floorsystems.com/en/HTCGlobal/HTCOffices/HTCGermany/Contacts.aspx
Sent from my HTC One X using Tapatalk 2
Thank you all and especially goku80 for fast replies. Gotta love xda community
shadehh said:
Thank you all and especially goku80 for fast replies. Gotta love xda community
Click to expand...
Click to collapse
no problem my friend. i feel your pain and know what you are going through. i will keep you updated with my one and what happens..keep me updated with yours as well
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Eddzz!! said:
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Click to expand...
Click to collapse
oh really..seriously i wonder if you had a gap how would you feel about your perfect phone? everyone to their opinion. i can live with it no problem..but the fact knowing that it is there will bug the **** out of me hence why i am going through what i am right now
I had a creaky SGS for 2 years. I still have it now and it works and looks as good as it did on day one.
Eddzz!! said:
I had a creaky SGS for 2 years. I still have it now and it works and looks as good as it did on day one.
Click to expand...
Click to collapse
well i will see what they say tomorrow..if they replace it for me all is good..but if they do not and want to fix it ehh i kinda have to think twice being without my phone for a week
Ive heard that the one x was made in 2 different countrys taiwan and china... china being the worst built ones buttt I must have a really faulty dhd. I've had it for 10 months now and my screen moves, doesn't fit right on the phone as there should be a lip round it but isn't my speaker isn't straight so is sloping. Looks like the cnc machine hasn't cut it right. Power button is really recessed too far in..... I think a little sqweek is nothing to really worry about if the screen falls out then ya I'd send it back.
Sent from my Desire HD using XDA
htcmodteam said:
Ive heard that the one x was made in 2 different countrys taiwan and china... china being the worst built ones buttt I must have a really faulty dhd. I've had it for 10 months now and my screen moves, doesn't fit right on the phone as there should be a lip round it but isn't my speaker isn't straight so is sloping. Looks like the cnc machine hasn't cut it right. Power button is really recessed too far in..... I think a little sqweek is nothing to really worry about if the screen falls out then ya I'd send it back.
Sent from my Desire HD using XDA
Click to expand...
Click to collapse
well that is what worries me about the whole damn thing..if it gets to hot to soon and in two months down the line the screen actually does fall out
TBH ive just checked mine and it does have a slight gap with lint building up already (bare in mind ive had this phone 2 days) Also have the yellow blotch on the screen AND a dead pixel. This is by far the best phone ive ever owned...But my word these little niggles are grating on my moobs! Ive never had to send a phone off to a repair centre before but im not really willing to put up with the problems the phone has (however ridiculously small they seem to some ) You expect some software issues in an early batch, but dead pixels, discoloured screens, gaps occuring out of nowhere between the screen, its a bit much really! Im gunna have to get it sent off soon i think, gutted!
how do you clean the dust build up?
abuds87 said:
how do you clean the dust build up?
Click to expand...
Click to collapse
Use a screwdriver.
P.S. http://forum.xda-developers.com/showthread.php?p=27066789
abuds87 said:
how do you clean the dust build up?
Click to expand...
Click to collapse
Vacuum cleaner with a soft piece of cloth on the vacuum tube to avoid scratches.
Just another option
To the OP: May I ask what serial your phone has?
Cheers.
Eddzz!! said:
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Click to expand...
Click to collapse
Do you even realize how big 1mm is?!!!! Get a ruler and see please....
I doubt even a blind person could enjoy a phone with a gap big as that. You would not just see this, but also feel.
I have a gap that's about 0,1-2 mm big (measuring with paper, which is about that in average I think 0,1 till 0,3 I think but also not sure) and its around the whole screen on both sides of the ring.
Ugh...1mm...
But seriously guys, how big are the gaps it makes you return it?
I mean should I return it with 0,1 mm ? (maybe less) seen a bigger gap on SGS 2.

Categories

Resources