Develop Bugs

XV6875 (Verizon) Digitizer

Anyone know how I can purchase this? I got a tiny scratch on the screen.. well, its more like a crater. Its almost like someone took a needle and dug a chunk out of my screen.. Like a crotch-located steering wheel, its driving me nuts.. Big time..
What are the differences between the GSM and the CDMA screens? Would a Verizon store be able to order this part? I don't want to send it anywhere simply because I don't wan to relock and reflash and wait xyz amount of time to get it back.
To access the digitizer, do we have to go from the battery on up or can it be removed from the top or sides somehow? Thats an important question too.. as removing it from the bottom-up would require a complete dissassembly of the phone.. and I do mean complete.. speaker, radio, motherboard, keyboard, hinges.. ugh..
Or perhaps from the middle? I am pretty sure there are screws on the back. I just wonder what the result would be.. I don't care if it requires purchasing the bezel either.. I just want to make it clear, that the screen works fine and the digitizer senses input on the spot where its 'injured'.. I'd say its no more than.. 3 pixels height.. 1 pixel width..
yeah, I'm nuts. But you'll benefit from that if I end up detailing the digitizer replacement process. Once I have my new screen on I'll try to see what methods I can use to get the old one looking brand new.. I'm ready to wet sand this bastard. jk

Was looking at the ghost armor CDMA page when I (finally) decided that the ebay digitizers were the same damn thing as my Verizon CDMA.. Only difference is the cut out for the front vid cam.. Now, electronically.. is this true? This looks like it would physically work.
http://cgi.ebay.com/For-HTC-Touch-P...AU_MobilePhoneAccessories?hash=item27adf15e64
This digitizer would mate up with the 'slider flex cable w/ earspeaker' as seen on this page..
http://cnn.cn/shop/t7373-touch-pro2-rhodium-c-277_815.html
I'm not saying anything for certain.. its mostly educated speculation.

Adhesive/glue for a digitzer/touch screen replacement

Long story short, phone falls out of my pocket about 1ft onto a laminate floor and the whole digitizer decided to crack (so much for really strong screens). I've ordered a replacement digitizer but i cant seem to find anywhere on this ever so vast internet, what adhesive I need to attach the new digitizer.
the phone is running cm7 so i really don't want to go through the hassle of re-flashing it with a stock ROM in the hopes of getting it repaired under warranty.
very stressfull week, and now this think im gna go sit in a corner and cry
Any help is really appreciated

Any retail strong glue would do the job as what I see here. Just the case of how details is your work would come. If you do it slow and details without any rush or interuption, I think it will turn out like new you wouldn't notice it has changed the screen.
I've seen a video clip, a guy changing the Defy crack screen and it turned out very dirty. The glue just spread out all over the side of the screen.
You could just do a few practice of using the glue on a different object that required sharp and details hands/fingers and then only come back to work with your delicate DEFY.

Thanks for the quick reply
if the video is the 3 part one where fixes the screen and forgets he hasn't charged it then i watched that a few Min b4 my first post.
Google'd the names on the adhesive he used and got no results besides music cd's lol.
Would using the wrong kind of glue affect the touch screen? I don't really care about the waterproofing as it will be inside my wrist strap all of the time whilst im on my bike, but i just want to ensure that using the wrong glue wont render my new screen absolutely useless.
My town is riddled with phone repair shops. I got quotes from 4 of them, for just simply glueing the digitizer to the faceplate. Lowest quote i got for 5 min work was £20......... daylight robbery!!!
And my fingers are very accurate for some reason (apart from when trying to hit a link on the defy browser without zooming in grrrrrrrr), glued the trim on my les paul guitar easily, still give it a few practises tho
again, thanks for the quick reply

Good...
A good practise is to pour the glue like a water drop on a paper and use a sharp holder like twiser or a pin and take it a little and spreading it along the side of the Defy screen frame evenly.

Bubbles under digitizer? No screen protector

Hi all. Quick searching leads me nowhere as there are thousands of problems concerning issues I'm NOT having. Sorry for the crappy 3ds camera pic, it's the only thing I have at my disposal right now besides the phone. As I said in the title, I'm not using a screen protector - this is a stock phone right out of the factory with no accessories, albeit aged a bit.
If you'll take a look, you'll see two screen bubbles. The huge funky-looking one at the top started out looking like the one at the bottom, and grew over a period of a few weeks. The bottom one started out really small and doubled in size to what it is now, but has since stopped.
It's really annoying and starting to bother me, but I was wondering if anyone had experienced similar issues, or has any input whether or not I can maybe fix this thing without having to get a whole new screen/digitizer/whatever. No replacement plans on this phone so gotta figure something else out. Any idea what's going on?

D-Lew said:
Hi all. Quick searching leads me nowhere as there are thousands of problems concerning issues I'm NOT having. Sorry for the crappy 3ds camera pic, it's the only thing I have at my disposal right now besides the phone. As I said in the title, I'm not using a screen protector - this is a stock phone right out of the factory with no accessories, albeit aged a bit.
If you'll take a look, you'll see two screen bubbles. The huge funky-looking one at the top started out looking like the one at the bottom, and grew over a period of a few weeks. The bottom one started out really small and doubled in size to what it is now, but has since stopped.
It's really annoying and starting to bother me, but I was wondering if anyone had experienced similar issues, or has any input whether or not I can maybe fix this thing without having to get a whole new screen/digitizer/whatever. No replacement plans on this phone so gotta figure something else out. Any idea what's going on?
Click to expand...
Click to collapse
Is the plastic actually raised up? Can you see it when the screen is off? To me it looks like the digatizer may be going out, but its hard to tell from a pic.

It appears to be sealed and working fine... just has bubbles. I don't really know much about the insides of this phone, but it almost looks as if whatever is behind the digitizer is slightly warped and might be causing some contact with the glass or something like that. Reflections (off what is behind the screen - lcd? Not the reflections off the glass) tend to bend near the bubbles, whereas everywhere else behind the glass is pretty straight.
Essentially it just looks like water droplets or air bubbles forming on the inside surface of the glass, but it's never seen water before. I don't think the digitizer is failing.

Same problem, can I fix this myself?
Hi guys, I have the exact same problem on my HTC Desire. Touch is working fine, the pixels underneath are ok... yet this thing is expanding. What used to be 3 little bubbles near the very corner moved and turned into this amoeba looking thing after a few months.
Here are a few other shots.
Hope someone can let me know the possible verdict? Is it gone? Can it only be repaired by a professional or can I expect to be able to "clean up" the inside of the screen if I dismantle my phone as it is done here?:
http://forum.xda-developers.com/showthread.php?t=1566313

Maybe the liquids from the lcd are boiling from the heat? Sounds dumb but is a possibility
Sent from my ADR6300 using xda app-developers app

Yikes. Mine is still having the same issues. I'm thinking about just tearing it down soon and figuring it out myself. A little nervous working on something with such small components. Any tips for a first teardown? I need to get a T6 torx and I've already looked at a couple disassembly guides, was a while ago though.
As far as I can tell, I will have to replace either the digitizer/glass or the LCD. If it's the latter I'll probably just upgrade the phone cause they seem pretty pricey.

Ok, I did what I said and investigated myself. Unfortunately, I broke my phone doing it.
The problem is the front glass/digitizer. I couldn't get the LCD off, but I pried it back enough to see bubbles through the glass looking from the inside.
I broke my LCD prying on it, now I have an ugly black spot. Guess I'll be buying an LCD and a digitizer now. Anybody have some spare ones, or know the cheapest place to get them?

D-Lew said:
Ok, I did what I said and investigated myself. Unfortunately, I broke my phone doing it.
The problem is the front glass/digitizer. I couldn't get the LCD off, but I pried it back enough to see bubbles through the glass looking from the inside.
I broke my LCD prying on it, now I have an ugly black spot. Guess I'll be buying an LCD and a digitizer now. Anybody have some spare ones, or know the cheapest place to get them?
Click to expand...
Click to collapse
There are some digitizers on ebay for about $20 USD. i dont know about LCDs cause i never needed to replace mine but i would assume that they would be a little more expensive. Also, make sure you get the digitizer WITH the bezel because it will make your life a ton easier.

I'd better not touch it then
Sorry to hear about your LCD, D-Lew
Guess I wont be touching mine on my own. I'll definitely break it trying to do the same thing as you. I wonder if it's gonna break my phone if I just leave it as is. I mean, apart from the fact that it is there, it is not affecting the performance at all.

The bubble might get bigger. That's all you have to worry about.
Sent from my GT-P3113 using xda app-developers app

Broken Screen - Which part should i buy?

My GF broke the screen on her Droid Incredible, Verizon insurance wants $100 to replace it, so not sure it is worth it for this phone, and she has a few months left before her upgrade is ready. If i am going to try to fix it for her, can anyone with experience tell me what parts specifically I would need? The LCD seems fine, so i would think i can replace just the digitizer, which i can get on Amazon for $16
http://www.amazon.com/Incredible-Sc...ement-Adhesives/dp/B005TGX6X8/ref=pd_cp_cps_0
They also sell with front housing
http://www.amazon.com/Touch-Screen-Glass-Digitizer-Incredible/dp/B005L0XRRM/ref=pd_cp_cps_1
any tips which to buy or what to do etc?
Why would one/How does one know if they need to replace the LCD as well?
All touch aspects of phone working fine and seems like it's just the glass cracked.

Dillsnik said:
My GF broke the screen on her Droid Incredible, Verizon insurance wants $100 to replace it, so not sure it is worth it for this phone, and she has a few months left before her upgrade is ready. If i am going to try to fix it for her, can anyone with experience tell me what parts specifically I would need? The LCD seems fine, so i would think i can replace just the digitizer, which i can get on Amazon for $16
http://www.amazon.com/Incredible-Sc...ement-Adhesives/dp/B005TGX6X8/ref=pd_cp_cps_0
They also sell with front housing
http://www.amazon.com/Touch-Screen-Glass-Digitizer-Incredible/dp/B005L0XRRM/ref=pd_cp_cps_1
any tips which to buy or what to do etc?
Why would one/How does one know if they need to replace the LCD as well?
All touch aspects of phone working fine and seems like it's just the glass cracked.
Click to expand...
Click to collapse
I am no expert, but it would seem that if anything under the glass was broken, you would need to replace the lcd (that is, if you could see the lcd "leaking" or being distorted)
Sent from my ARCHOS 80G9 using Tapatalk 2

Nothing under the screen seems broken.
Anyone done this?
Sent from my SAMSUNG-SGH-I717 using Tapatalk

Dillsnik said:
Nothing under the screen seems broken.
Anyone done this?
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Click to expand...
Click to collapse
Unfortunately I have had the pleasure of replacing my digitizer twice. You definitely wanna buy it WITH the frame or housing. The adhesive is like industrial strength and you will end up breaking the original anyways when trying to remove the digitizer from it. I have to warn you that doing this repair yourself will void your warranty. Make sure the digitizer you get comes with the tools required to get the phone apart. You can get this as a package on eBay fairly cheap too. There are about 3-4 circuit strips that will have to be removed from their clips, don't be intimidated by them, but be gentle. Your first time is gonna take you a while, just be patient. If you need to do it a second time, its gonna be a breeze. PM me if you have any concerns during your repair.

yea get a digitizer also,
I had the same thing happen to me, it was a pain but there are a few videos on youtube
that should help you through it, though it doesn't sound like its that bad

Definitely go with the digitizer and housing replacement together. Bottom line, it will make your life so much less of a headache while replacing it.
Sent from my ADR6300 using XDA

I just replaced mine this weekend. I attached some before, during, and after pictures...
These were the guides that I followed:
Part 1: http://www.youtube.com/watch?v=TfpPS7oO4Q8
Part 2: http://www.youtube.com/watch?v=GJMAmKpk20c
Personally, I went with just the glass/digitizer (your first link) and it went fine. The glass is difficult to get out of the housing, but it's not that bad. It probably took me 20 minutes to get the old glass out, maybe 5 minutes of cleaning goo from the old adhesive, and probably another 5 minutes to put the new glass back on.
Some Tips:
The pry tool that comes with it is very cheap. I would suggest using it sparingly until you get to the LCD panel extraction and glass removal. You want it to be as in good of condition as can be when you get to those later steps.
Use a blow-drier to heat up the adhesive, and get it to the point where you almost cant touch it. I used some yellow kitchen gloves so I could get it a little hotter and still be able to hold it. I used a combination of my hands and the pry tool and worked mostly along the sides and top first, then separated the bottom last.
The guy in the youtube videos uses glue, but you shouldn't need that. It comes with pre-cut adhesive strips, which work great. One word of caution though... The sheet that they come on is scored for you, but I suggest using an x-acto to cut them out. This is especially important for the thin rectangle that goes around the outside of the glass. You really don't want to pull on that... you don't want it to get stretched or twisted. Summary: the strips work great, just be careful extracting them from the sheet they come on, and placing them on the phone.
Don't forget to get the red earpiece grill off of the old glass before throwing it away. You'll need to super glue that back onto the housing, but it's really easy to see where it goes. This should be the only thing you need glue for.
When removing the glass, cleaning up gunk from the old adhesive, and applying new adhesive, be careful of the electronics at the bottom for your capacitive buttons... you definitely don't want to harm or obstruct those.
This should probably go without saying, but make sure not to touch the inside of the new glass, or the LCD panel. You don't want fingerprints or dust inside the phone. Even if you don't touch it, I would still give it a shot of compressed air right before putting it in, just to make sure there's no dust.
I would say that it's probably worth the extra $10-12 bucks to get it with the housing already included, but it's definitely not necessary if you want to save a little money. As I said above, it only took me about a half hour to get the old glass out and the new glass in, and from what it sounds like, there is still some effort involved even if you get it with the housing (moving the circuitry from the old one). I wouldn't worry about breaking the frame... it's pretty strong. If you break it, you're doing it wrong. Although, if your frame has some scrapes and other assorted road rash on it like mine does (see first picture), then maybe you might want a new one anyway. Another consideration... the reviews on Amazon for the one without the housing are much better, but that could just be because of people who don't know what they're doing... who knows.
If you have any questions, I'd certainly be willing to help... PM me if you want. And if I'm going to be around when you go to actually do the replacement, I can give you my gchat address in case you have any questions during the process.

[Resolved] Digitizer Dead-zone...?

So I got this nice (albeit beat-up, but 100% functional) G2 from a friend, and for about 3 weeks it had no problems. I rooted it, put CyanogenMod 7.2 on it, worked fine.
About 3 days ago, it started behaving really weird while I was using it. Interfaces not responding, at times opening things when I didn't have my finger on the screen, usual possessed phone behavior) I did some investigating with the Developer Tools' Pointer Location display, and there's this massive dead-zone on my digitizer! The dead-zone (while holding the phone in landscape) goes from X=255.1 to X=401.1, and covers all the Y-values in that range. if I move my finger slowly enough through the deadzone from one fo the sides of it, it will register as being directly in the center of it. Other times it will show a very light touch on the right side of the zone, activating interface elements and the like.
What happened? Do I have to replace the digitizer? I don't have a warranty on it, seeing as I got it second-hand. Possible fixes, if it's not a serious hardware issue?
I don't have money to spare, so buying things to fix it might take a lot of saving.
EDIT: Got it in the mail finally, replaced it in 45 minutes. I had to use the dorm's heated-air hand-dryer to get it off, and I kinda messed up the glue a bit, but it's working just fine.

If you have to replace the digitizer, I would not worry. I just got done replacing the lcd on my G2, and it works. I bought the lcd (in your case it would be a digitizer) off ebay and my purchased also included the screw drivers and plastic tip thingy to open the phone. For the digitizer you might need to also get double sided tape.
There is a youtube video showing how to take a part and put back the phone. I think the video was like 30min, but when I did it, the time was 1.5hrs totally.
good luck if you go that route.

Previous post is spot on, for most people I would assume this won't be a hard task, I have opened and repaired dozens of g2s (and many other phones) and although sliders tend to be the most complicated its really straight forward
Find a YouTube video or other instructions online and look at it ahead of time to see if its something you feel comfortable with. Then if so, order the digitizer (90% this is the cause 10% the main flex) for around 15-20$ and all you need is a #0 Philips and a t5 torx and a hairdryer/heat gun
You won't need tape as there is more than enough sticky left after prying of the digitizer. Expect about that hour in half if your new to this, but can be done in less than 20 if you do it a lot Here is a link to info on your phone including repair guides
http://forum.xda-developers.com/showthread.php?p=43195539
Best of luck!
Sent from my Nexus 4 using Tapatalk 2

Aw. Was hoping this wouldn't be the solution.
That sucks. Just went and ordered one, it came with screwdrivers and the prying tool, but I don't have any double-sided tape. Let's hope it's still sticky. Well, it supposedly gets here on the 9th, so I'll read up on replacing from these links. Thanks for the support. Hope I don't break the thing. :/