Hi,
This thread will be devoted for presenting known info on WP7.
Please do not post here, but post your [Q] here:
http://forum.xda-developers.com/showthread.php?t=876463
Regards. ansar.
No 1
How to identify your inital ROM version:
Suppose you see in the about screen this:
******************************************
Firmware revision number: 2250.09.10906.162
Hardware revision number: 0003
Radio software version: 5.50.09.15_22.23.50.09U
Radio hardware version: A.102.0.D4
Bootloader version: 1.9.2250.6(111329)
Chip SOC version: 2.2.5.0
******************************************
Then your initial ROM version is something like this:
RUU_DeviceName_Operator_1.09.162.06_DeviceName1_5.50.09.15_22.23.50.09U_RELEASE.exe
Where:
DeviceName is: Schubert,Mozart,Spark,Surround etc.,
DeviceName1 is: missing or as above.
Operator is: Europe, TMO_DE, TMO_AT, HTC_Generic, Telsta_WWE etc
The radio is straigthforward.
The firmware version must be rearranged as follows:
these last digits .10906.162 to 1.09.162.06
End of No 1
Post #2
Post #2 is for future use
Post #3
Post #3 is for future use.
Post #4
Post #4 is for future use.
Post #5
Post #5 is for future use.
ansar, why do you make these useless threads?
indiekiduk said:
ansar, why do you make these useless threads?
Click to expand...
Click to collapse
instead of demoralizing those who contribute, its better to be quiet, yes?
itje said:
instead of demoralizing those who contribute, its better to be quiet, yes?
Click to expand...
Click to collapse
normally yes, but this particular user is confusing everybody but saying something is possible when it isn't.
Its more for future usage then right now. But all this will come in handy...u'll see (perhaps )
What rom to use?
Phone information
name: HTC 7 Trophy T8686
Model: HTC 7 Trophy T8686
Firmware revision: 2250.09.10908.401
Hardware revision: 0003
Radio: 5.54.09.21_22.33b.50.10U
Radio hardware: A.102.0.D4
Bootloader: 1.20.2250.0(117833)
chip soc: 2.2.5.0
I'd like to flash it so i can unlock with chevron WP7 and then update with 7390 again.
my phone is not operator locked but i am using it in sweden
Related
Hi
I’m developing an app called Marathon (XDA thread including free version: http://forum.xda-developers.com/showthread.php?t=750709). Lately I’ve got reports that the API which lowers the background music volume during voice announcements stopped working after applying the NoDo update. My problem is that the dev device I’ve got is still stuck at 7.0.7003.0, so I can’t test this myself.
I’ve created a small test app and it would be very helpful if a few people could help me out by trying it and answer my questions below .
Before starting the tests:
1. Download and deploy the XAP attached to this post.
Test #1:
1. Go to the Zune player and start some music
2. Start the application
3. Press on the button “Test #1”
4. Exit the app
5. Answer the following questions:
a. Does the volume decrease of the background music?
b. Can you hear the message: “This is a sample message” clearly?
Test #2:
1. Go to the Zune player and start some music
2. Start the application
3. Press on the button “Test #2”
4. Exit the app
5. Answer the following questions:
a. Is there any difference from Test #1?
Test #3:
1. Go to the Zune player and start some music
2. Start the application
3. Press on the button “Test #3”
4. Exit the app
5. Answer the following questions:
a. Does the music pause while a sample message is read (and then resumes properly)?
b. Can you hear the message: “This is a sample message” clearly?
Test #4:
6. Start the FM Radio, pick any channel with music
7. Start the application
8. Select the radio button “FM Player” under “Test API for:”
9. If the text at the bottom says “According to the API the radio is currently Off”, please press on “Set radio to ON”.
10. Press on the button “Test #3”
11. Exit the app
12. Answer the following questions:
a. Does the music pause while a sample message is read (and then resumes properly)?
b. Can you hear the message: “This is a sample message” clearly?
c. Did you have to press on the “Set radio to ON” button (as stated in step 9)?
Here’s a sample answer based on my phone (please include the phone model, os version, etc. This is available in Settings->About->More Info):
Name/Model: LG GW910
Carrier: AT&T
OS Version: 7.0.7003.0
Firmware revision number: 0.8.2.3
Hardware revision number: 1.1.0.0
Radio software version: 0.8.2.3
Radio hardware version: 0.3.5.0
Bootloader version: 1.5.0.0
Chip SOC version: 0.30.2.0
#1
a: Yes
b: Yes
#2
a: No
#3:
a. Yes
b. Yes
#4
a. Yes
b. Yes
c. Yes
Thanks in advance!
Johan
Name/Model: HTC Mozart T8698
Carrier: O2 Germany
OS Version: 7.0.7392.0
Firmware revision number: 2250.09.13001.401
Hardware revision number: 0004
Radio software version: 5.54.09.21_22.33b.50.10U
Radio hardware version: A.102.0.D4
Bootloader version: 1.30.2250.1(117833)
Chip SOC version: 2.2.5.0
#1
a: No
b: Yes
#2
a: No
#3:
a. Yes
b. Yes
#4
a. Yes
b. Yes
c. Yes
Name/Model: HTC Arrive
Carrier: Sprint
OS Version: 7.0.7389.0
Firmware revision number: 2305.06.12501.651
Hardware revision number: 0002
Radio software version: 1.51.00.0127RC_23.12w.05.06U
Radio hardware version: 2.0.3.0
Bootloader version: 1.25.230506.1(118490)
Chip SOC version: 2.3.0.5.6
#1
a: No
b: Yes ( depends on song )
#2
a: No
#3:
a. Yes
b. Yes
#4
a. Yes
b. Yes
c. Yes
Sorry, not allowed to post question to EFS Thread, not enough postings. Hope somebody here can help.
Rooted Samsung Captivate Glide running original ATT Gingerbread with instructions from original XDA thread. Terminal-app, nandroid and wifi-tether work well (rooted).
Wanted to use EFS Pro for backup before upgrading to ICS.
Installed EFS Pro 2.0.33.Release from above thread on Windows XP SP3. Installed Samsung USB Drivers. Installed .NET 4.0.
Installed BusyBox v1.20.2-Stericson on the Samsung Phone after EFS Pro complained about it missing.
EFS Pro seems to start OK (why the heck can't i copy&paste this text *sigh*):
Initializing ADB server... Okay.
Checking device, please wait...
Device is Perm Rooted!
BusyBox is installed on device!
Ready...
But then when i click on "Backup" in EFS Pro, it just shows an empty Device Partition table. No clicking around on Device Filter, endable/disable MD5 checksum/Refresh will help.
Device Info shows (stupid app not letting me copy&paste that output):
--- Hardware Information ---
Connected Device SN.: ....(seems ok)...
Device Manufacturer: SAMSUNG
Device Model: SAMSUNG-SGH-I927
Product Code: SGH-I927ZKAATT
Hardware Version: REV0.1
--- Firmware Information ---
PDA Version: I927UCKI3
Baseband Version: I927UCKI3
CSC Version: Unknown
--- Software Information ---
Kernel Release: 2.6.36.3-I927RUXKJ5-CL652095
Kernel Version: #3 SMP PREEMPT Fri Oct 14 15:47:29 KST 2011
ROM Build: SGH-I927-user 2.3.5 GINGERBREAD UCKI3 release-keys
Android Version: 2.3.6
BusyBox Version: 1.20.2-Stericson
SU Bindary Version: 3.0.3
The only thing that looks unlike other screenshots is the unknown CSC Version, and i have no clue what that is.
I couldn't find a description of how to create a partition file. PLayed around a bit but no clue what the entries there mean, and couldn't find a documentation in EFS Professional for it either.
So, what should i do now. Anything i did do wrong ?
Older 1.12.6 works
Found older EFS Pro 1.12.6 somewhere on the net, installed, and it work (backed up EFS). Status output was the same.
So i guess there is a problem with the newer 2.0.33. Oh well. Will send a PM as well to the author.
Well, hello and good day to all of you!
I'm a new guy here at the forums by the way, I need help or instructions on how to root this particular Spreadtrum smartphone I just recently bought two days ago.
I tried searching the forum and found some similar or related threads, but I'm not quite taking the risk in following those threads without asking someone with the knowledge about this phone... I was even shocked to know that some Spreadtrum powered phones are not really an ICS device. XD
So anyway, here are the specs:
Model Number: SKK A6 (re-branded company/device name)
Android Version: 4.0.4 (?)
Baseband Version: DM_BASE_12A_W12.32
Kernel Version: 2.6.35.7 [email protected] #5
Software Version: MocorDroid 2.3.5.W12.20_P0_20130506.11023
Hardware Version: 1.1.0
Any help would be appreciated, thanks!
Just to bump this thread, added info, I accessed the factory test mode and did a full phone test:
Can't really make up what's the rest written, the screen is too small to display it:
sprdroid_base-user 2.3.5 MocorDroid 2.3.5.W12.20_P0_20130506.11023
3PlatformVersion: MOCOR_880X (screen is to small too display the rest of this info)
W12.43_P1_Debug Project Version
20_modem$BASE Version: DM_B (again too small to display the rest of the information)
W12.43 HW Version: SC682 (?? and again, to small too display the rest)
(I'm assuming the next following lines is the modified firmware of the rebrander company
11-02-2012 17:53:08CUSTOM Version
RWF-SKK.20120506.B02V10
SN1:
SN2
Hello, everyone!
I hope this is the proper place to place this requirement. I would like to have some help as to the procedure needed to update a stereo car head unit with the following specs:
Model number: 1215016
MCU Version: MTCB-YZ-V2.67 (Jul 09, 2015 18:57:26)
Android version: 4.4.4_09072015
Kernel version: 3.0.36+ [email protected] #642 Thu Jul 9 20:25:57 CST 2015
Build number: rk3066-eng4.4.4 090072015 20:47:31
CPU: armv7 1.6 GHz (x2)
Memory: 1024 MB
Brand: Myron & Müller
It crashed recently so I took it to the car dealer's and they reset the unit but it does not allow me to synchronise the phone book and calendar and the default music app is simply useless.
I do thank you for any help you can provide me with.
Yes, its the right place, I would put a newer ROM on it.
typos1 said:
Yes, its the right place, I would put a newer ROM on it.
Click to expand...
Click to collapse
Hello!
I had not been able to get on with this issue before but now I can devote some time into it. Could you please tell me what the procedure to install a new ROM is? Besides, can I install any MCU which begins with MTCB or is there anything I need to be careful about.
Thanks in advance for your help!
velugov said:
Hello!
I had not been able to get on with this issue before but now I can devote some time into it. Could you please tell me what the procedure to install a new ROM is? Besides, can I install any MCU which begins with MTCB or is there anything I need to be careful about.
Thanks in advance for your help!
Click to expand...
Click to collapse
All the answers are in the wiki in my signature - you can only use YZ MCUs and you can use any MTCB/C ROM that matches your screen res and processor type.
Hi all,
Please forgive any noob errors!
So, i've enjoyed my HTC One m8 for a few years.
I admit i got it eBay (fleaBay!!) from what turns out to be a tester. Hence the "test phone/device" status.
Unbeknown to me, this would appear to have meant that my Android OS has not been updating at all over my ownership.
Not a huge problem until i developed exactly this problem:
https://forum.xda-developers.com/htc-one-m8/general/white-dot-mouse-pointer-m8-t3524318
and set about looking into fixing things,
Software information:
Android Version
Protected
HTC Sense version
Protected
Software Number
3.24.999.1
Kernel version
3.4.0-g9b1faea
[email protected]#1
SMP PREEMPT
Baseband version
1.21.21331147A1.04G_20.60.4196.01L_F(SM)
Build number
3.24.99.1 CL384550 release-keys
Boot Menu
*** Software status: Official***
***Locked*** guessing this could be an issue?!
M8_UL PVT SHIP S-OFF
CID 11111111
HBOOT-3.19.0.000
RADIO-1.21.21331147A1.04G
OpenDSP-v46.2.2-00564_M8974_FO.0811
OS-3.24.999.1
eMMC-boot 2048MB
Sep 5 2014,15:37;51.11783
I dont know if being able to update Android would help with above problem, but im sure it'd be a good start.
Installed was
HTC SSD Test Tool App, Ver 5.2.14.6 - anything i can do with this?!
PVS Info App, Ver 2.3
RxD Test QMI App, Ver 1.12
Any advice as to how i can solve either or both of the issues of the white dot/cursor issue - tried all suggested int he other thread, and Android update unlocking would be gratefully received!
Cheers
Dave
davross81 said:
Hi all,
Please forgive any noob errors!
So, i've enjoyed my HTC One m8 for a few years.
I admit i got it eBay (fleaBay!!) from what turns out to be a tester. Hence the "test phone/device" status.
Unbeknown to me, this would appear to have meant that my Android OS has not been updating at all over my ownership.
Not a huge problem until i developed exactly this problem:
https://forum.xda-developers.com/htc-one-m8/general/white-dot-mouse-pointer-m8-t3524318
and set about looking into fixing things,
Software information:
Android Version
Protected
HTC Sense version
Protected
Software Number
3.24.999.1
Kernel version
3.4.0-g9b1faea
[email protected]#1
SMP PREEMPT
Baseband version
1.21.21331147A1.04G_20.60.4196.01L_F(SM)
Build number
3.24.99.1 CL384550 release-keys
Boot Menu
*** Software status: Official***
***Locked*** guessing this could be an issue?!
M8_UL PVT SHIP S-OFF
CID 11111111
HBOOT-3.19.0.000
RADIO-1.21.21331147A1.04G
OpenDSP-v46.2.2-00564_M8974_FO.0811
OS-3.24.999.1
eMMC-boot 2048MB
Sep 5 2014,15:37;51.11783
I dont know if being able to update Android would help with above problem, but im sure it'd be a good start.
Installed was
HTC SSD Test Tool App, Ver 5.2.14.6 - anything i can do with this?!
PVS Info App, Ver 2.3
RxD Test QMI App, Ver 1.12
Any advice as to how i can solve either or both of the issues of the white dot/cursor issue - tried all suggested int he other thread, and Android update unlocking would be gratefully received!
Cheers
Dave
Click to expand...
Click to collapse
The GPS issue and Google Maps problem seems to be a common issue with our device. I experienced it on lineage os and fixed it by flashing the rom linked below. Also, it appears that your bootloader is locked. That needs to be addressed first.
Link mentioned above - https://forum.xda-developers.com/htc-one-m8/development/rom-leedroid-one-m8-l-v1-0-5-t3019102/page1
Newbie unlocking thread - https://forum.xda-developers.com/showthread.php?t=2716150
Another unlocking thread - https://forum.xda-developers.com/showthread.php?t=2708571
Also, on googling "HTC test" you may want to investigate that further. There may be an XDA thread related to it as well. It is definitely nothing I am familiar with.
Aimless Rambler said:
The GPS issue and Google Maps problem seems to be a common issue with our device. I experienced it on lineage os and fixed it by flashing the rom linked below. Also, it appears that your bootloader is locked. That needs to be addressed first.
Link mentioned above - https://forum.xda-developers.com/htc-one-m8/development/rom-leedroid-one-m8-l-v1-0-5-t3019102/page1
Newbie unlocking thread - https://forum.xda-developers.com/showthread.php?t=2716150
Another unlocking thread - https://forum.xda-developers.com/showthread.php?t=2708571
Also, on googling "HTC test" you may want to investigate that further. There may be an XDA thread related to it as well. It is definitely nothing I am familiar with.
Click to expand...
Click to collapse
Thanks for the reply AR.
Its looking increasingly like the only way to get anywhere with this might be to unlock. Do you think this would enable updating, or would it then be a question of manually updating?
I'm just a little reluctant becuase i dont want to end up bricking my phone. But i guess it's getting to the point where its becoming increasingly frustrating it might be time to upgrade if nothing else can be done.
As far as the "HTC Test" thing goes there are a few other threads on here and elsewhere, but none with a resolution. Looks like mostly people have been in a position to hand them back and ask for a legit device. Dangers of eBay!