Develop Bugs

[ROM] Hybrid Stock XWJS3 pda + OLBJPA csc + DXJPB modem

Many people have been asking me how to get the combination of the stock Android 2.2.1 ROM, XWJS3 with the CSC and modem from the Asian DXJPE rom.
I decided to put up this procedure and downloads for those who want to try it.
I assume that you already know how to use Odin.
1. Download the XWJS3 PDA file, this file includes the SpeedMod K12P kernel already.
>>> DOWNLOAD LINK.
2. Download the DXJPB modem file below, and extract the .tar file inside the .7z file (DXJPB modem is from the DXJPE rom).
3. Flash the XWJS3 PDA tar as PDA using Odin, and DXJPB modem tar as MODEM.
No re-partition, no PIT.
4. Now you should get XWJS3 PDA and DXJPB modem, but no CSC.
5. Download the file below - it is a 7zip file that contains update-csc-olbjpa-xsp.zip. Extract the file update-csc-olbjpa-xsp.zip and put that in your internal SD card.
6. Reboot into the CWM Recovery and choose "Install ZIP, choose zip", then choose the update-csc-olbjpa-xsp.zip file above.
7. Now reboot your phone again and you should have the OLBJPA CSC with the XSP sales code selected.
----- About the CSC -----
The attached update-csc zip file contains a modified XSP sales code which has the APNs and MMS settings for all operators in the OLBJPA CSC - so that's all operators in Southeast Asia. I made this for my own convenience as I swap SIM cards from several countries a lot, but I figured it will be useful for most people living in SEA.

Reserved for future use.

Any possibility to have the native locale as SEA instead of Euro based?

just what i was looking for. nice one hardcore!

I got Force Close after lagfix, it seems only happen to I9000XWJS3 - "the process com.android.phone has stopped unexpectedly. please try again" any idea?
P.S: It works fine if only "Root", happen like this after lagfix has been done, I had tried to wipe all, reflash rom etc, it still happen same. has flash back to I9000DXJPE...

haha.. this is what im asking! thanks!

Thank u very much, Hardcore.
I've posted sometime ago in your Speedmode thread to ask u if u mind to share your rom, modem and csc. Finally... Happy to see this.

Hi Hardcore ,
would you add JPJPG modem to XWJS3 ? I think this is the way that lead us to have persian/arabic support on this rom...
Thanks a lot.

maybe u should format your internal memory card
darychia said:
I got Force Close after lagfix, it seems only happen to I9000XWJS3 - "the process com.android.phone has stopped unexpectedly. please try again" any idea?
P.S: It works fine if only "Root", happen like this after lagfix has been done, I had tried to wipe all, reflash rom etc, it still happen same. has flash back to I9000DXJPE...
Click to expand...
Click to collapse

darychia said:
I got Force Close after lagfix, it seems only happen to I9000XWJS3 - "the process com.android.phone has stopped unexpectedly. please try again" any idea?
P.S: It works fine if only "Root", happen like this after lagfix has been done, I had tried to wipe all, reflash rom etc, it still happen same. has flash back to I9000DXJPE...
Click to expand...
Click to collapse
i got that too when i tried doc's 9.1 dxjpe and hardcore's modified csc. doc said it was an issue but will address later.

amir_rafie said:
Hi Hardcore ,
would you add JPJPG modem to XWJS3 ? I think this is the way that lead us to have persian/arabic support on this rom...
Thanks a lot.
Click to expand...
Click to collapse
The modem has nothing to do with persian/arabic support.
Anyway, I believe webstar1 has done something. Go check out his thread.
Sent from my GT-I9000 using XDA App

Will it display chinese?

Will this work for AT&T Captivate

In fact I had did that each time when I flash new rom, it still same...

Yeah... This answer the mistery behind hardcore's mixed ROM status... Really what I'm looking for... Thanks hardcore...

@hardcore
Thanks for the rom - works great.
I seem to have a problem now with text messages not being correct.
Ex: Should say Power Off on menu, but says Sound is On.
My csc version says unknown.
Any ideas?

Seifer1975 said:
Will it display chinese?
Click to expand...
Click to collapse
Yes but no chinese input. Mighty be worth having a patch for that.

gcrutchr said:
@hardcore
Thanks for the rom - works great.
I seem to have a problem now with text messages not being correct.
Ex: Should say Power Off on menu, but says Sound is On.
My csc version says unknown.
Any ideas?
Click to expand...
Click to collapse
U might have used a modified resource apk like a battery icon mod. U have to make a new one matching this rom.

Thanks. I did use a JPY framework-res.apk. Will make a new one.

hardcore said:
Yes but no chinese input. Mighty be worth having a patch for that.
Click to expand...
Click to collapse
I am using the swype that has chinese input. So if I copy that over, I assume there should be chinese input right?

[ROM 2.2.1] - I9000RSJS2 Official Italian firmware by kies

Hi,
here is the kies-firmware released today by Samsung for Italian Galaxy S.
http://www.multiupload.com/LEJYFW42NM
PDA : I9000RSJS2
PHONE : I9000XXJPY
CSC : I9000ITVJS1
Build Info : 2011.01
Use Odin with no PIT and no Re-Partition option and put file in PDA field.

Rom Low Level Format for Odin
PDA JS2 + Modem JPY
CSC ITV JS1
Pass: esticbo
I add in the PDA the boot.bin and the sbl.bin from the JS5 so we can use this rom to come back from the JV1
No mirror Grazie
ro.build.display.id=FROYO
ro.build.version.incremental=RSJS2
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=2011. 01. 24. (월) 13:26:32 KST

And what about this update? Did you notice any change?
Fatece sapè

build date of this official release please?

i thought this was supose to be gb instead its the old 2.2.1 update

Can someone post Swype languages please, thx!

ro.build.display.id=FROYO
ro.build.version.incremental=RSJS2
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=2011. 01. 24. (월) 13:26:32 KST

Yeah, but I prefer keep XWJS5 with JPU modem and speedmod-kernel-13c, which work like a charm and surely is "newer" and better than RSJS2 IMHO
However, thanks man!
Sent from my GT-I9000 using Tapatalk

very good firmware.... just upgdare, i find it very smooth 1248 on quadrant no lagfix.
how to root? i can use z4root or oneclicketcetc (i don't remember the name)

cyberz said:
Yeah, but I prefer keep XWJS5 with JPU modem and speedmod-kernel-13c, which work like a charm and surely is "newer" and better than RSJS2 IMHO
However, thanks man!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Why did you say the XWJS5 is newer?
Let's me explain..please

catfis said:
Why did you say the XWJS5 is newer?
Let's me explain..please
Click to expand...
Click to collapse
Built date. XWJS5 has a newer build date. I means that RSJS2 was built much earlier than XWJS5 but the latter was released first.

thelastsperance said:
very good firmware.... just upgdare, i find it very smooth 1248 on quadrant no lagfix.
how to root? i can use z4root or oneclicketcetc (i don't remember the name)
Click to expand...
Click to collapse
superoneclick should do the thing

Feedback on this rom?

esticbo said:
Rom Low Level Format for Odin
PDA JS2 + Modem JPY
CSC ITV JS1
Pass: esticbo
I add in the PDA the boot.bin and the sbl.bin from the JS5 so we can use this rom to come back from the JV1
No mirror Grazie
ro.build.display.id=FROYO
ro.build.version.incremental=RSJS2
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=2011. 01. 24. (월) 13:26:32 KST
Click to expand...
Click to collapse
It's not a good idea to mess with bootloaders, especially boot.bin
If boot.bin is corrupter/flash fails you have a completely bricked phone, not even a jig will save it.
sbl.bin is less risky, since if you have an intact primary bootloader (boot.bin) you can jig your way out. I think you should remove boot.bin from your package, since only the sbl.bin from JV1 is needed for to work anyway

Mothatt said:
It's not a good idea to mess with bootloaders, especially boot.bin
If boot.bin is corrupter/flash fails you have a completely bricked phone, not even a jig will save it.
sbl.bin is less risky, since if you have an intact primary bootloader (boot.bin) you can jig your way out. I think you should remove boot.bin from your package, since only the sbl.bin from JV1 is needed for to work anyway
Click to expand...
Click to collapse
+1
Sent from my GT-I9000 using XDA Premium App

kapollo said:
superoneclick should do the thing
Click to expand...
Click to collapse
yes i try it (1.7) but it says the phone is root and install superuser too, but when i issue the su command on terminal emulator the command fail, also roor explorer won't work.
start the program
plug the phone and when ask for the connection type i press back.
press the root button
and a list of "OK" appear on screen but when i press the test button no permission question came out... and the process says "test ok" !!!!
what i miss?

thelastsperance said:
yes i try it (1.7) but it says the phone is root and install superuser too, but when i issue the su command on terminal emulator the command fail, also roor explorer won't work.
start the program
plug the phone and when ask for the connection type i press back.
press the root button
and a list of "OK" appear on screen but when i press the test button no permission question came out... and the process says "test ok" !!!!
what i miss?
Click to expand...
Click to collapse
ok ok i have resolved. after a reboot the root begin to work

home switcher
home switcher don't work with this new firmware

Hi, I've already installed this rom but i can't find the AOSP lockscreen for this official I9000RSJS2 firmware, can you help me?
I've searched this in the forum but there's nothing..
Thanks!

Mothatt said:
It's not a good idea to mess with bootloaders, especially boot.bin
If boot.bin is corrupter/flash fails you have a completely bricked phone, not even a jig will save it.
sbl.bin is less risky, since if you have an intact primary bootloader (boot.bin) you can jig your way out. I think you should remove boot.bin from your package, since only the sbl.bin from JV1 is needed for to work anyway
Click to expand...
Click to collapse
+2
... moreover mangling with a different GSM_NATION_CODE (XW vs. RS)
If you actually want flash with PIT (512) and Re-partition, it would much better to build a 4-file CODE.tar only (ok for your empty dbdata.rfs), without boot & sbl binaries.

[Q] wave s8500 BADA 2.0.1 problem

my fw version is S8500XXKF3 * ##
when I instal bada 2.0.1 and click download button on the multiloader it says:
Can not open : CSC !
what can I do ? what is the problem
I have ticked boot change - full download - using version 5.65 - updated the new
driver - I think I do everything right , but theres sth wrong.
any help please.....

pedramtt said:
my fw version is S8500XXKF3 * ##
when I instal bada 2.0.1 and click download button on the multiloader it says:
Can not open : CSC !
what can I do ? what is the problem
I have ticked boot change - full download - using version 5.65 - updated the new
driver - I think I do everything right , but theres sth wrong.
any help please.....
Click to expand...
Click to collapse
Seems like zipped file you have downloaded is corrupted. Try to download S8500XPKG5 from samfirmware, there is zipped FW with multiloader v5.65. It could be corrupted csc file or multiloader problem.
Best regards

[ROM][RTL] New 2.3.6 JW4 Deodexed + Root + RTL Fix [Mediafire Links = FAST]

The stock JW4 released recently with 364MB RAM.
This is Deodexed and rooted.
Please follow the steps for root and RTL fix.
1. Flash Deodexed JW4 (link below) using Odin (link below).
2. Power off the phone and go into download mode and flash the kernel (link below) using ODIN for root and to install RTL.
3. Transfer the RTL fix (link below) file to internal SD and reboot to recovery.
4. Flash RTL fix file from recovery and reboot the phone to have RTL fix working flawlessly.
If you get Force Close on your applications then Wipe Data and Cache to make it fix.
NOTE: You need to install a different keyboard like Swiftkey X to type RTL languages.
Links:
1. 2.3.6 Deodexed JW4 7z EXE 147MB OR 2.3.6 Deodexed JW4 RAR 157MB = Both are same, just different compression methods.
2. ODIN with 512 pit
3. JW4 Root Kernel
4. RTL fix
========
CREDITS
========
Kernel is CWM
RTL Fix tutorial and support for Madmack
Found the Deodexed rom from a Russian website, don't know the website now
================
Please comment if it works or any problems you encounter.

Mediafire link is an .exe file.. What is the actual file extention??

Its a self extracting rar file. I have it and the tar file is within. Its safe so do not worry.
Sent from my GT-I9000 using Tapatalk

Could contain a Virus
doughy2002 said:
Its a self extracting rar file. I have it and the tar file is within. Its safe so do not worry.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
No offense, but it's hightly suspicioous to post an EXE file (i.e. Can be a VIRUS, or something that could do whatever to your computer) from a user that has only 8 posts in this forum, and been confirmed by someone with 17 posts...
Please change the file format to RAR, ZIP, like everybody else.

It is a self extracting compressed file containing the tar file compressed with 7z.
RAR uploaded.

thanks man

Your welcome hassan.

Trying
Hi Rivalbro,
This is the first time i will upgrade from froyo to GB. I will try this anyway, so wish me luck...tx a lot
Edit:
this is for my other gadget ... the i9000, not the Leo...

is it a one file flashing rom? i suppose it goes in PDA field, right (havent used odin for a long time)? is the extension .tar.md5 good? i remember that all files i have flashed had only .tar ... sorry for this noobish questions , i am a bit "rusty"

is this ROM with the value pack?

help
Hi,
I just flashed my i9000 according your instruction. I put rom on bootloader field (right?), turn off, enter downloading, put kernel in bootloader field again, enter CMW and install fix RTL. But i hav galaxy looping right now. please help...
thanks

Hi, sorry for answering so late, had no internet...
You need to select the tar.md5 in PDA, not bootloader. The kernel as well.
It is the value pack version with Touchwiz 4 like the Galaxy S2.

Noob queation wht RTL means ? and how it works? thanks more power
Sent from my GT-I9000 using XDA

Also can i use this to jw5?
Sent from my GT-I9000 using XDA

g3n3ral said:
Noob queation wht RTL means ? and how it works? thanks more power
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
RTL is a fix for "Right To Left" reading languages like arabic, urdu. No need to worry if you don't use RTL type languages.
---------- Post added at 02:46 AM ---------- Previous post was at 02:46 AM ----------
g3n3ral said:
Also can i use this to jw5?
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
No

Thank you for the RTL fix!

You're welcome

flash question

Samsung Galaxy W:
1 - To flash a new ROM with ODIN the phone must be rooted? Yes, no, or "no need but advisable"?
2 - Inside CSC file i8150OXXKL4 (or even OXXKL2), that I think is a multiCSC file, wich languages are included, exactly? Anybody knows? Or at least anybody knows if Portuguese language is included?
Thanks.

FR8148 said:
Samsung Galaxy W:
1 - To flash a new ROM with ODIN the phone must be rooted? Yes, no, or "no need but advisable"?
2 - Inside CSC file i8150OXXKL4 (or even OXXKL2), that I think is a multiCSC file, wich languages are included, exactly? Anybody knows? Or at least anybody knows if Portuguese language is included?
Thanks.
Click to expand...
Click to collapse
1. No, when you flash a stock rom to your phone using ODIN your phone will no longer have root access. so you have to root it again.
2. Try XXLM8. it has Portuguese in it.