I have been using both the CM Internet Sharing program and the WMWifiRouter with no issues for over a year now on my AT&T Tilt 2.
One day a couple weeks ago I had been using CM to connect my laptop to the internet. everything was just fine as usual.
At some point, I had disconnected and tried to reconnect, and since then I can no longer use either of these programs.
What happens is this...I turn them on and the phone will no longer hold a connection to the ad-hoc network that is created. Up in the status bar I see the icon showing WiFi trying to connect but it will not stick anymore.
I can connect to my office and/or home wifi router still. It just will not connect to the ad-hoc network any longer.
This makes no sense to me at all, since it has always worked and was even working earlier in the day when it stopped working.
I use the tethering frequently and really need to get this solved. Any help would be greatly appreciated.
NOTE: I am able to connect using WMWifiRouter using the USB connection option.
Any help? Please?
Hmm...
I had this problem on a stock WinMo 6.1 ROM, I fixed the problem by hitting Advanced in Comm Manager [or go into the WiFi setting in Settings-System] and then connect to an infrastructure point. Comm Manager doesn't like Ad-Hoc points for some reason. Did you try resetting WMWiFiRouter? There's a setting in it for that.
Not that I'm sure any of that will work, I at least got it to connect to normal access points now and make the Ad-Hoc connection, but there's no throughput in the connection and I really don't feel like reinstalling my custom ROM, so I just popped my SIM into my MyTouch. But that doesn't really help you... sorry...
Thanks, but none of that is gonna help.
I have no problem connecting to any normal wi-fi network.
It had no problem connecting to Ad-Hoc for the last year until the other day and NOTHING has changed.
I was using CM Internet Sharing and not WMWifiRouter. I switched back to WM because at least with that I can set it to use USB. But neither program is working with Ad-Hoc now.
I don't even see the setting for infrastructure point. I am not on a stock ROM. I also just realized my signature was old. I'm on a Tilt 2 with a custom Manila ROM.
It's just so weird cause it always worked and suddenly stopped!
Arg!!!!!!
Related
Hi,
I'm using WiFi at home, hosted by a Linksys WRT54GL router running OpenWrt and secured with WPA2/WPA-PSK. Once in a while, the WiFi connection to my Rhodium gets disconnect (phone issue, wifi on my notebook is stable). After this disconnect, I go to the notification list, and theres a notification telling my that theres a new network found, but to connect to the network, I need to enter the WPA password everytime. Only way avoiding to reenter the password is rebooting the device; then it automaticly connects to my network again.
Anyone having similar problems or even know a fix?
Thanks in advance,
Christoph
same...
I got the same problem, and i got the same router as you with WPA2... It's really anoying. Is it a settings issue on the phone or what?
Wifi Issues with Smartphones / PDA WEP and WPA
I've been a windows mobile / smartphone user for about 4 years now. I started off with a xw6700 from verizon, then a Tilt from ATT, and now testing a Touch Pro 2 from t-mobile not sure if I'm keeping it. With each device I've had the same issues. I will explain below what I've found and what I've done to make it as painless as possible with WIFI and my PDA devices.
I currently run 2 WIFI networks due to this issue. I use roadrunner so I was able to about 10 years ago get a multiple IP package, which they no longer offer. I have 4 IP addresses 3 of which I use for my computers/1 wifi network and another I use for a wifi network just for PDAs/phones.
If i use a PDA with WIFI enabled on the network my computers are on using WEP after a few times of connecting/disconnecting PDAs and trying to reconnect I get a problem where the device wont take my WEP key over and over again. I have to reboot the WIFI router, and then the device will connect successfully. This is very annoying since any device I try to add to the wireless will not connect as well. This problem is due to the PDA, now I've tried mulitple routers DLINK, NETGEAR, LINKSYS, AIRLINK, they all do the same.
Now with my 2nd network I use WPA. WPA seems to be more friendly when it comes to disconnecting and reconnecting PDAs. I can use my PDA's on this network connecting and reconnecting for a few weeks before the WIFI router requires a reboot because it will no longer take the WPA password. Again I am not sure why this happens, and I am not sure why it affects WM5, WM6, WM6.1. Not sure if its the hardware of the device or the software, but it seems to happen no matter what WM device I have.
My iphone will disconnect and reconnect to either of my networks without any problem. Unless the PDA screws up the wifi on either network, then the iphone will never authenticate and connect to the network. Seems these WM devices no matter what hardware are really good at screwing up WIFI networks.
Now my findings are every time you put the phone to sleep/off the wifi turns off, it could possibly be the cause for the above, this pisses me off. There was one forum a while back I found someone saying WPA is more stable. I know the iphone does the same (turns off wifi when in standby/sleep), but doesn't affect the router the same as WM devices. If anyone would like to say otherwise then they are wrong/lying to you. I guarantee if they turn off and on their WM device to say check an IM or a TXT and turn it back on a few times they will experience the same problems above, which it seems everyone experiences but no one has answers.
I wish there would be a professional from HTC or HP or anyother PDA maker who will just come out and say they screwed up and didn't want to fix it.
I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Has anyone else had this problem? I had to finally do a hard reset/wipe to get things working again.
There's another similar report here, maybe in the cdma area.
I'm not clear on your issue. Is this wmwifi not working after a reboot or Activesync not recognizing after the reboot?
And are you using the latest wmwifi?
edit: I'm adding that I downloaded the latest wmwifirouter last friday 18sep09, and I thought it was a vpn/wifi issue on my laptop. My TP2 did not recognize under activesync after I did a few things, but WM did work the one time I tested it.
I am not using wmwifi. I am using HTC CM Internet Sharing:
http://forum.xda-developers.com/showthread.php?p=4170499#post4170499
I figured it was put out by HTC (and free) so it should work right?
It created the wifi access point fine, and I was able to surf with my laptop at good speeds. I left and came back and the internet would no longer connect (laptop or phone).
I tried everything from soft rebooting, to removing the application, to calling *228 (reset the phone), and even manually setting up the verizon data settings. Nothing worked. I just could not establish a data connection.
Finally I gave up and did a hard reboot and restore and it finally worked.
I really need a reliable way of setting up a wifi access point but dont want to risk this fiasco again.
Yeah, I mis-read your first post, sorry!
For me it was as simple as starting the wifi router program and then cleanly stopping it. If forced to quit, you will have no network access. It's happened a couple times for me.
jbass350z said:
I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Click to expand...
Click to collapse
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
billu said:
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
Click to expand...
Click to collapse
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
jbass350z said:
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
Click to expand...
Click to collapse
Ah, that's probably for some other reason, no issues with 3G connection for me.
Same problem for me. I connect to the mobile through wifi (Adhoc connection) and the mobile is connected in 3G but I can't surf internet from my laptop.
Enable DHCP
Hi all
Sometimes after using this software you need to renable DHCP in the connections settings. This can be done via:
Start>Settings>Connections>WiFi>Wireless Networks>Network Adaptors>NE2000 Compatible Ethernet Adaptor and then select Use server-assigned IP address.
Cheers
andrew-in-woking
hi i installed e htc wifirouter but it is using my mms setting instead of my phone internet setting. any1 can help?
Hi friends,
I have a terrible problem with my fine TouchPro2.
It constantly loses the wifi-connection. My old TouchPro1 never had these issues.
I have the actual HTC stockROM installed. Tried WiFiMonster - but again. After a few seconds it loses the connection.
Sometimes I'm able to download three, four mails, but then it breaks again :-(
Any idea?
re
To be more specific: WiFi goes off after 30 sec. or so. :-(
does wifi turn off? or simply disconnect? if it's disconnecting, first thing i'd do is reboot my router with wifi enabled on the phone and see if the connection improves. if wifi is physically turning off i'd guess it's an issue in the rom. maybe try another rom? and make sure wifi is set to "best performance" on phone.
Is this everywhere or on a specific router?
Does your connection drop after a certain activity (e.g. screen going into standby, opening a specific program, etc.)? Also, have you tried to backup your device and perform a hard reset?
Similar Problems
I've been having similar problems for about two weeks now.
I have tried several things like hard reset, soft reset, changing the rom, playing with the wireless connection and just about everything in the connection folder but no.
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection. However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
If anyone have any suggestion(s), I would greatly appreciated it.
solved...
Thx guys,
I performed a Hardreset and testet one by one the installed software... and found it: I installed a CommManager and it caused the WiFi-Problem :-(
thx
biddle said:
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection.
Click to expand...
Click to collapse
What do you mean "slows down the phone"?
biddle said:
However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
Click to expand...
Click to collapse
If your wifi connects but you cant get out, check to make sure you don't have the proxy box checked in connection settings. I have seen this box mysteriously become checked in the past.
Just a little comment
I will be getting TP2 very soon, but speaking of WiFi problems in general..
I had 3 phone: TyTN II, Samsung Omnia & iPhone 3g. only the TyTN could connect to WiFi at home while the other two can connect but will not get any data... however, they worked flawlessly in numerous other locations...
the problem was with my linksys router
apparently some older routers not compatible with the newer devices...
just wanted to share
Ok. As of today, it seems to be working, thanks for the help. However, I think it might have been my router. I think it had something to do with overheating because I put my modem on top of it. But the funny part was, everything, with the exception of my phone, was connecting. However, the connection was never really strong or reliable.
Anywho, thanks for the suggestion, even though it didnt really help me, I appreciate the gesture.
So I've been using the Tom coding package that installs the mobile Wi-Fi router with no problems until last night... now it keeps trying to connect to ISP.Cingular and then stops... it basically doesn't work now. I've tried to uninstall and reinstalled it dozens of times with no luck.
And yet... the 3G connection works because I can browse through Opera. So...?
OhI might add that I can turn on the Wi-Fi and connect to my in-house router just fine and do what on the internet through the phone. SO... it is definitely something specific with wireless internet sharing.
???
Someone please he me I use internet sharing DAILY
You need to make sure that it is connecting to the correct address. At the bottom of the App, it should have a few different choices of connections to use. Try another one and see if it works. You may have to set up a new connections for this to work properly. Keep in mind that tethering/mobile hotspot is not covered by AT&T's wireless data plan. It is a separate monthly charge. You should be careful when using it too much at a time, so they don't block or throttle your connection.
The device I am trying to connect with to my Tilt 2 is a Samsung Galaxy Tab, and apparently it doesn't like ad-hoc, whatever that is exactly. I was told on the Galaxy Tab section of this forum that this is the case, and that I need some kind of "mobile ap", although again I do not understand what that exactly means. ???
Ah, see that's much better information. So, no, you probably won't be able to connect without another app doing so. Ad-hoc is, simply put, a connection to another device other than a router which is allowing you access to its Internet connection. If the device you're trying to connect with doesn't allow ad-hoc connections, then the Wifi Router app won't do you any good, as that is the type of connection it uses. Most mobile devices do not natively support this, however. The problem, therefore, is with the Galaxy Tab you have, not with the TP2. Find an app or mod that allows for ad-hoc connections and you'll be all set.
Well is there an apparently for the WM phone side of things that will do non ad-hoc??
No. Ad-hoc is a connection between two devices. Unless you use a router, that's how it's going to be no matter if you are using WM, a laptop, iOS, Android, et cetera. The connection type is determined by the device sending the signal. If it comes from a device, then it is ad-hoc. It is not a problem with the software. That is how wifi was designed to work in the first place. The problem, again, is with the Tab, not the WM application.
Well apparently there is a solution for the Tab that allows it to see ad-hoc networks, so I will try that and let you guys know how it went.
Can no longer connect to Ad-Hoc with Tilt 2
I have been using both the CM Internet Sharing program and the WMWifiRouter with no issues for over a year now on my AT&T Tilt 2.
One day a couple weeks ago I had been using CM to connect my laptop to the internet. everything was just fine as usual.
At some point, I had disconnected and tried to reconnect, and since then I can no longer use either of these programs.
What happens is this...I turn them on and the phone will no longer hold a connection to the ad-hoc network that is created. Up in the status bar I see the icon showing WiFi trying to connect but it will not stick anymore.
I can connect to my office and/or home wifi router still. It just will not connect to the ad-hoc network any longer.
This makes no sense to me at all, since it has always worked and was even working earlier in the day when it stopped working.
I use the tethering frequently and really need to get this solved. Any help would be greatly appreciated.
Hi All,
I am trying to share my laptops internet connection with my Defy via a virtual miniport adapter(using a program called connectify)...my phone gets connected perfectly and I am able to surf the net on my phone..but only for a short time. After a while if I just let the phone be on standby for a while, it loses the internet connectivity. It remains connected to the hotspot(on my pc) but somehow there is no internet on the phone anymore. However if I turn off the wifi on my Defy and put it back again, the internet is back. I have tried almost everything but nothing seems to work. Initially i thought the problem might be with the connectify software on my system so tried using other softwares such as virtual router intel mywifi technology etc. I even tried to create a virtual wifi miniport manually from the command line but same problem everytime. I tried to change the wifi sleeo policy in my phone to never and that did not help too. I am running stock Froyo on my Defy. Sometimes when I turn off wifi and turn it back on it wont even connect to the access point, keeps showing scanning...connecting...scanning...connecting...then finally disconnected. I just cant understand what is wrong. If someone can throw some light on this...it would be really helpful, its almost 20 days since I am breaking my head over this.
Thanks
this might help
Install connectify and select wifi security mode as Ad-Hoc,WEP,this worked for me the defy sometimes seems to have a problem with WPA2.