Develop Bugs

[android] Problem with NAND :/

Hello!
Ive got a problem aftter flashing a *.nbh for NAND android :/ It just hanged on the splash screen. No any linux logs

If you can still get bootloader, try reflashing, sometimes it fails for no apparent reason, if that still does not work, try formatting the SD, recopy the nbh, reflash again.
If all else fails, you may be one of those who cannot flash to nand, I have 2 kais130's one flashes every time, the other, about 1 in 15 times is successful.

zenity said:
If you can still get bootloader, try reflashing, sometimes it fails for no apparent reason, if that still does not work, try formatting the SD, recopy the nbh, reflash again.
If all else fails, you may be one of those who cannot flash to nand, I have 2 kais130's one flashes every time, the other, about 1 in 15 times is successful.
Click to expand...
Click to collapse
I can still get bootloader, a reflashed, today i putted new SDHC card and i try to reflash nbh. Only 1 time after flash I can see linux logs, I can to install it too, but when ill reboot phone then hangs like early :/

Ok first which Android build are you trying?
When you say reboot, are you using the reset button or pulling the battery after flashing, ( using reset can cause problems, the correct method is flash, pull battery, wait, replace battery ).
Which nbh are you trying to flash? If you had android working then you may want to go back to the nbh you used before.

zenity said:
Ok first which Android build are you trying?
When you say reboot, are you using the reset button or pulling the battery after flashing, ( using reset can cause problems, the correct method is flash, pull battery, wait, replace battery ).
Which nbh are you trying to flash? If you had android working then you may want to go back to the nbh you used before.
Click to expand...
Click to collapse
Im using kaisimg-panel1-428-12-03-10, im using a reset button not battery trick. Im using warm donut biuld. As I said i can boot android from NAND just 1 time, not anymore

Well the best nbh's for the kaiser are still the sourceforge ones at least for stability, the 20/02/2010 ones, yes there are newer ones, but they may require some pretty advanced editing of some system files before they run properly, and may not be fully compatible with the donut build.
I think it may be better to use one of these : http://sourceforge.net/projects/androidhtc/files/2010-02-20/kaisereclair/

I have the same issue with dzos latest. I posted it in the bluetooth thread as to not open any unneeded topics. The fix he posted 11-03-10 for bluetooth booted fine, this one gives me the same issue. Remember this stuff is all relatively experimental so try not to panic when using the very latest since it might not work.

Apparently there is a problem with the latest nbh's, I'd just reflash an earlier NBH, this should fix the problem.

I'm having the exact same problem. Everything seems to get installed properly but once I take out the battery to reboot it just hangs on the splash screen. I've tried several builds and reformatted the card several times... always the same result. In one of the posts I cam across it was mentioned that you first have to go in to win mobile to turn off a pin # and that can cause the system to hang if not done. I can't find the post anymore and I'm not sure what they were talking about.

kcbronc said:
I'm having the exact same problem. Everything seems to get installed properly but once I take out the battery to reboot it just hangs on the splash screen. I've tried several builds and reformatted the card several times... always the same result. In one of the posts I cam across it was mentioned that you first have to go in to win mobile to turn off a pin # and that can cause the system to hang if not done. I can't find the post anymore and I'm not sure what they were talking about.
Click to expand...
Click to collapse
Yeah I read about disabling the pin thing in Win Mo as well, but unfortunately this was after I flashed Android to NAND. Mine hangs at the splash screen as well, but if you put the KAISDIAG.nbh file in the root of your SD card, from the Hard SPL threads, the phone will boot and get to the Android installer, but will then come up with errors when choosing to install to NAND. Unfortunately, I can't even go back to Win Mo because of this.

[Q] Problem with system

Hey guys i have android on my kaiser for 2 months and it happened to me twice that suddenly part of system fall, that means home button stop works and when somebody call me it just said i am busy. Reset didnt help so i had to reinstall the ROM. Can u tell me where is the problem?

sorry wrong post

I think we need more info, like what did you last do when it happen, did you install something new, did the battery die while in android, is this haret or nbh install?

Its NBH install on NAND. I have Cyanogen Rom and the latest kernel and i didnt do anything unusual just normaly used it.

John2y said:
Its NBH install on NAND. I have Cyanogen Rom and the latest kernel and i didnt do anything unusual just normaly used it.
Click to expand...
Click to collapse
which cy rom? I had issues with one crashing all the time (cy stuff was freezing the system up) so maybe a diff distro like fresh froyo or I am using Incubus26Jc's Super FroYo.

Also something that helps is clearing the download folder on your sd card. I know in froyo those files have been my bane. The stupid market has download resuming now, but it looks like it doesn't do well restarting the write of the file on the system (which is why you usually don't to this unless you are a master).

CM7 problems?

I'm making this thread to try and solve issues and problems with cm7 for problems that you can probably solve instead of posting 10 times and making a repeated question in the official thread of cm7 development thread
If you have any issues we can help each other, to start with I got the blue then green light on my first restart, but after wiping data and cache AGAIN (I already did it before installing from zip) it worked!
I had problems with the notification widgets, but after a few restarts it didn't dissapeared. So that problem solved by itself
I currently have the flash notification widget not working (and it works on camera but not on video recording) I don't know if it is a common problem from the beta 3 version (If someone knows I would be thankfull***) but meanwhile you can get the flash to work with this widget https://market.android.com/details?id=com.advback.ledflashlight&feature=search_result
The Wifi is working OK but it seems like the refreshing time of signal is too low (I get close to the wifi router and maybe there are 1min. until the small widget at the top fills up) and viceversa I get away from signal and it is remained full until 1 min or so.
edit:
For Gps small fix you can find in the page 123 this from AkkiandDefy:
1.Search FasterFix in the market and install!
2.Open it and choose your region the
3.Now theprogramm will install the right Config
4.And then install GpsFix and let him search
Don't be afraid..let him search longer(till he tell the right adress). Once fixed he will find it always faster.
Admin or mods if there is any problem with my thread let me know, I'm just trying to help

good Idea

just trying to help hehe my idea is to get the important information in the first post just done the flashing of the test2 for gps going to try right now

I was installing this, and it was all going fine, used the recovery thing here, it booted up fine. I then rebooted again to put on the googleapps as an update.zip, updated and now it gets stuck at the Motorola boot screen?
EDIT: OK, so I tried another data/cache wipe and installing CM7 again as update.zip, but have to use the default bootloader now and it says "signature verification failed". :S

did you instal the nordic version? 3.4.3 11 (the last one) flash this, then install superuser (with superoneclick) afterwards instal the clockwork (I used the same one as you) then wipe data, cache install beta 3, gapps and gps test 2 and reboot it should work

Viridis said:
I was installing this, and it was all going fine, used the recovery thing here, it booted up fine. I then rebooted again to put on the googleapps as an update.zip, updated and now it gets stuck at the Motorola boot screen?
I had the same error - i reflashed the 3.4.3.11 sbf with rsd lite
after that, rooted , instaled clockworkrecovery and booted into recovery mode to instal CM7
After installing CM7, i allowed to boot itself (2init is set on automatic) then just reboot and enter into custom recovery via pressing vol down right after blue notification light appears - frome here you can acces custom recovery and install addons like gapps and gps fix.
Warning - entering from Clockwork recovery after CM7 installed will get you in bootloop and need to reflash the main sbf again.
Click to expand...
Click to collapse

really? I think I did it and it didn't happen that, but anyway my recomendation for those we don't know so much is to install from clockwork the beta, gapps and any fixes (gps etc) at the same time without rebooting so we don't have to use it anymore (in this logical order, 'cause maybe it doesn't mind but maybe it can prevent us from getting any error)

Thanks for the replies everyone.
Right now I've flashed 3.4.3.11 on with RSD Lite, that went fine. I've rooted with Superoneclick and installed the custom recovery app from before, and I can get into Clockwork recovery with that.
Now though when I try to do a wipe it says "can't mount /dev/block/mmcblk0p2 (File exists)" and "error mounting /sd-ext/!". I took out my SD card and formatted and partitioned it with 500mb ext, 50mb linux swap and around 1.5GB FAT to see if that would help, but it hasn't. I did this with my PC, however I did use the one on the recovery before that, which was probably a bad idea. I didn't think to much of it since it should have only affected the SD card.
I think now I need to use ADB or something to fix this, I've also unrooted and rooted again. I also tried installing cyanogenmod before the mount errors when only an "app2sd" error was coming up on the wipe, but it didn't actually do anything, it just started up with the stock 2.2 froyo again.
EDIT: I tried just wiping and installing cyanogenmod.zip and gapps.zip anyway, but it just comes reboots with stock blur/froyo. I don't have any "update.zip"s or anything.

try wipe from stock. do: vol down + power and then when the ! appears with the android guy press vol down + vol up
afterwards you will get stuck in the moto logo. get out the battery, put it again and flash the nordic version 3.4.3 11 then enable adb and with superoneclick install root
IMPORTANT: NOW GET OUT ADB AND REBOOT
after reboot install clockwork and get the beta 4 and gapps into the sdcard,
then wipe data and wipe cache
install from zip first beta then gapps (if an error of line X appears and says installation aborted just try again it will work, happened to me several times) and reboot!

Hey, thanks for the thread.
I have a problem with FasterFix. Mine asks for root permission but it just won't load. Remains in black screen and does nothing. GPSFix opens, but don't sync.
Any ideas?
@Quarx
Thank you for the CM7 mod, I'm loving it.
Will post it to the original forum post once I'm able to.
And will buy you a beer

you made a really good point, fasterfix worked in beta 2 and 3 (installed it several times with some wipes) now that I've read your post and tried installing it it installed granted permissions but it doesn't run so it seems to be a beta 4 problem that wasn't present before!

mariosanoguera said:
you made a really good point, fasterfix worked in beta 2 and 3 (installed it several times with some wipes) now that I've read your post and tried installing it it installed granted permissions but it doesn't run so it seems to be a beta 4 problem that wasn't present before!
Click to expand...
Click to collapse
I hope someone post this on the main thread.

I just applied the *.zip(s) and the am loading in for setup, it seems to be working so far. The boot screen is AWESOME as always... setup seems a bit twitchy but hopefully I'll get it to work here soon. *crossed fingers*

I think Im starting to have the earphone piece problem

Quarx posted another version to the main thread. Downloading now. Seems like it doesn't need to wipe. Lets see...
It seems a little buggy for those who have green lens. I'm waiting with 4.0.

Can I delete this post?

Problems to edit the contacts
Hello.
I've had problems to edit the contacts, in my phone book.
I syncronized my contacs with the Facebook contacts. Have all of then in my contact list, but when i need to add a phone number to the contact, it says that i can't edit Facebook contacts in that device. I need to create a new contact and put the phone number in that new one, and that pisses me cause i will need to have 2 contact from 1 person, duplicating my entire contact list. And all my contat that are in my SIM card don't show in the MOD. I have downgraded and all the contacts now have reapered.
Please, if someone knows how to help, since i was using the Blur, and had all my contacts from Facebook before, editing and merging then when they are duplicated.

It seems like the camera is not THAT working. When I zoom in too much it crashes and I lose access to the camera.
Is Quarx even knowing about this thread?
Edit: I was listening to a song in PowerAmp, opened an YouTube video and all sounds gone, some process forced close and no sound was played until restarted.
Edit2: it seems like that DSPmanager forced close when YouTube opened. Disabled for now.

I've updated to beta4 and the only issue I have is with GPS. Just tested camera, video and flash and all working.
Edit: also issue with video playback... it jumps.
Sent from my MB525 using XDA App

I can't play any videos at all. Guess I'll be back to froyo till this is fixed.
Sent from my MB525 using XDA App

[Q] hensemod problem

Hello,
I've installed Hensemod a few times now, without any problems the first time I boot the phone.
Only after that, when restarting or turning the phone on again, it takes very long to start, like it's installing again and then the internal memory is suddenly full, even though I had about 100mb when turning the phone off. Also, all apps I installed are gone. In the applications list (in settings) they seem to still be there, but they're all 0kb and there's no shortcuts to them in the programs overview... Like I said, I've installed the Hensemod a few times now, and every time this happens.
Anyone knows how to solve this? I really like this rom, I can finally install and update all apps I want without the phone becoming unusable because of full internal memory! Thanks!
Carolien

I used HenseModv3 is a nice ROM, u must have to wipe all the data, cache and dalvick cache in the CWM recovery section, then install the HenseMod ROM.
If any other problem, plz share.

I followed all the steps stated in the development forum post, it works fine, just cant restart the phone because it will stop working...

My phone just continuesly restart...

Plug off ur battery, then go to CWM recovery, try to intall any other/different ROM.
I install each ROM by above method,i didn't use fastboot uncheck option.

Never mind I was just being stupid... I wiped the cache partition and not the dalvik cache. Sorry about that! Let's see if it will work now. Installing rom at the moment.

And again... first boot worked fine, after that I'm stuck in a bootloop now... Just like couldzxz. Too bad! I'll have to try yet another mod. Hope the next update of hensemod will solve this!

yes, u can try different custom ROM if any problems with a particular ROM
wait for next updates from Henry_01

I got stuck in bootloop too. I reqlly like the rom but well.. :/
Sent from my HTC Wildfire S A510e using xda premium

Okay, i've seen your problems.
I've tested latest build, but didnt rebooted it.
I suggest you all use a previous version (3).
Problem can be also kernel related.
I don't have time now (exams), I will make a proper working build after some weeks.
Don't hesitate to post here further, I want to know if it is ROM or phone related.
BIG EDIT: i will include link for version 3.
Thanks to djpc for a new hack which will solve reboot/kernel/overclock problems.
Expect a build and a proper test on friday or saterday.
I will change links now so that you will get a good version lol.

Somehow, the fifth time in installed the latest Hensemod rom, it worked like a charm. I can reboot, have installed and updated all apps I wanted and still got like 90mb remaining. Fantastic! Finally after 6 months I have the phone I wanted.
First and second install I couldn't reboot
Third install I got stuck in a bootloop
Fourth install gapps crashed every 2 seconds (due to calendar and contacts synchronization)
Fifth install = perfect!
I don't know how it happened, I just kept on installing this one so I could copy another rom on the sd card since I don't have an adapter or card reader for it.
Thanks!

[Q] CM10 A7 ongoing boot issue

I have an ongoing issue with Galaxy W phone and CM.
The problem is that the phone spontaneously decides to not boot.
I had run CM10 from first Alpha, and on a couple of occasions it would, after several days or weeks use, stay on the CM spinning logo, and refuse to go to interface.
I got around this by keeping a couple of Nandroids handy and just restored them when the boot issue occurred.
On subsequent fresh install, I ran for a couple of weeks with virtually no app installations, to see if something I was running was causing the issue. Turns out no relationship.
I have just flashed Alpha 7 of CM 10 and now its doing it again. This is a fresh install.
I re-downloaded the ROM from the second mirror, and tried flashing with that, but get the same result.
Is it possible the flash memory in my phone is faulty? On a PC if you install an OS - fresh install - and it wont boot, generally its either RAM or HDD. Given this is a recurring issue, I wonder if its the phone, rather than the OS thats causing the problem - as I have tried with several of the Alphas and both download locations of the most recent Alpha and its still happening.
Can anyone suggest?
Is there a chkdsk option for phone flash memory?
thanks
Jim
[edit] just installed CM9 (last beta) and its doing the same thing - stuck at boot animation and will not get to desktop.
Anyone? Any ideas how to fix this?

Sv: [Q] CM10 A7 ongoing boot issue
Flash stock rom and see if the problem still exists. If not, flash cm again. If it does, get a new phone.
Sent through time and space from my s3mini.

16kzx81 said:
I have an ongoing issue with Galaxy W phone and CM.
The problem is that the phone spontaneously decides to not boot.
I had run CM10 from first Alpha, and on a couple of occasions it would, after several days or weeks use, stay on the CM spinning logo, and refuse to go to interface.
I got around this by keeping a couple of Nandroids handy and just restored them when the boot issue occurred.
On subsequent fresh install, I ran for a couple of weeks with virtually no app installations, to see if something I was running was causing the issue. Turns out no relationship.
I have just flashed Alpha 7 of CM 10 and now its doing it again. This is a fresh install.
I re-downloaded the ROM from the second mirror, and tried flashing with that, but get the same result.
Is it possible the flash memory in my phone is faulty? On a PC if you install an OS - fresh install - and it wont boot, generally its either RAM or HDD. Given this is a recurring issue, I wonder if its the phone, rather than the OS thats causing the problem - as I have tried with several of the Alphas and both download locations of the most recent Alpha and its still happening.
Can anyone suggest?
Is there a chkdsk option for phone flash memory?
thanks
Jim
[edit] just installed CM9 (last beta) and its doing the same thing - stuck at boot animation and will not get to desktop.
Anyone? Any ideas how to fix this?
Click to expand...
Click to collapse
What do you mean by clean install?
wipe data and cache?
Try to format /system /data /cache and /sdcard (backup your internal storage first)

MiguelPT said:
What do you mean by clean install?
wipe data and cache?
Try to format /system /data /cache and /sdcard (backup your internal storage first)
Click to expand...
Click to collapse
Thanks guys, very much for your replies
By "clean install" I have gone to wipe menu of CWM and wiped everything, then CM with wipes, then Gapps.
Ok so I need to try to flash with stock ROM. I had considered that but could not find an Australian ROM in the I8150 section of the Forum. Can anyone tell me where I can get one from?
- or -
-- maybe its ok to flash with any English ROM - will achieve the same thing? - sorry if this is a dumb question - I just dont want to make the situation any worse

Try Removing all SD Card,SIM and battery. Then reinsert battery after 15 minutes and reflash the CM10/Stock ROM. It will boot up

miki2o said:
Try Removing all SD Card,SIM and battery. Then reinsert battery after 15 minutes and reflash the CM10/Stock ROM. It will boot up
Click to expand...
Click to collapse
Ok. Thanks for the suggestion. I did that and its stuck on the Logo still. No change.

You can get stock ROM for Australian (Vodafone) from here http://www.hotfile.com/dl/187592956/3abb3c5/I8150TDULM1_I8150TVAULG1_VAU.zip.html

arya_ruby said:
You can get stock ROM for Australian (Vodafone) from here http://www.hotfile.com/dl/187592956/3abb3c5/I8150TDULM1_I8150TVAULG1_VAU.zip.html
Click to expand...
Click to collapse
Thanks very much for the link I have downloaded it
So I noticed something else thats kinda weird.
When I go to /sdcard, its not showing the content of the sd card
So if I swap out the card, it still loads the same folder, not the stuff from the sd card I have inserted.
I have a few of these. All read fine in the PC, but the phone does not seem to recognise the files, as they dont change if I reboot with a different card/different content in.
/sdcard
Code:
../
.android_secure/
Android/
LOST.DIR/
RZR/
Video/
cm-10-2013~ancora-alpha7.zip
gapps-jb-~signed.zip
SD card contents when read from PC
Code:
I8150TDULM1_I8150TVAULG1_VAU.zip
Its as though it has a partition called /sdcard, and can't mount the content of the physical card itself. Anyone seen this before? Is there a way to re-partition internal memory?

16kzx81 said:
Thanks guys, very much for your replies
By "clean install" I have gone to wipe menu of CWM and wiped everything, then CM with wipes, then Gapps.
Ok so I need to try to flash with stock ROM. I had considered that but could not find an Australian ROM in the I8150 section of the Forum. Can anyone tell me where I can get one from?
- or -
-- maybe its ok to flash with any English ROM - will achieve the same thing? - sorry if this is a dumb question - I just dont want to make the situation any worse
Click to expand...
Click to collapse
Just do full wipe you'll not wipe cwm!

My suggestion: Go the Pristine™ Way.
(thread in the General forum)
Sent from my GT-I8150 using xda app-developers app

arya_ruby said:
You can get stock ROM for Australian (Vodafone) from here http://www.hotfile.com/dl/187592956/3abb3c5/I8150TDULM1_I8150TVAULG1_VAU.zip.html
Click to expand...
Click to collapse
I tried that zip, but it started to install and the phone shut down/restarted at beginning of install (just after wipes)
Can anyone else confirms this file actually works?
Is there a Tread source I can refer to?

pepoluan said:
My suggestion: Go the Pristine™ Way.
(thread in the General forum)
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the suggestion. I tried but the problem persists.