Develop Bugs

delivering an application

Hi,
I want to deliver application on SD/MMC-Cards.
I have build a well-working cab-file with cabwiz.
The problem is, that the cab-file is deleted after executing.
Question:
Knows anyone how to achieve, that the cab-file is N O T deleted?
Question:
How can I execute the cab-file from a simple setup-program (which then saves the cab-file)?
Franz

Just make the file read-only and it won't be deleted after installation.

Sounds very nice,
but my MDA-Pocket PC has only a SoftInputPanel.
I can't find the ALT-Key and don't know how to get a property-panel.
Perhaps you can help?

If you use another file explorer like resco explorer, you can get to the properties by holding down the stylus on the file then choosing properties.

Set the File to Read Only on your PC before copying it to the SD/MMC-Card

Wow this is an old and unanswered thread.
The registry entry
HKCR\cabfile\Shell\open\command = 'wceload.exe "%1" /nodelete
On the device controls what is the default command to execute a .cab file so the above will leave it be.
Or you could try to add
HKLM\Software\apps\Microsoft Application Installer\nDynamicDelete = 0 (DWORD decimal)
To the cab and hope that this registry entry gets picked up immediately after installation.
Setting read only is the best user friendly way though, as you don't change default behaviour in the device.

Easy Install Andromniapro on B7610

Follow these steps to install Android (Froyo 2.2) on Samsung Omnia Pro, MicroSD.
What you’ll need next to (the qwerty B7610 )
* MicroSD (min. 2GB, formatted FAT32 and no hidden partitions)
* Install files from here
* Extract all files and folders from the downloaded AndrOmniaPro archive to a folder on your computer (one you can easily find again)
I- Copy install files:
* Connect your Omnia to USB. In WM settings > General > USB-connection choose ‘Mass storage’ and select ‘My storage’.
* On your computer, go to the folder you extracted AndrOmniaPro and copy everything from the folder called ‘Froyo_beta1_1024′ to ‘My storage’ on the Omnia.
* Go to the folder you extracted AndrOmniaPro and copy the file called ‘o2b3update.tar.gz’ to ‘My Storage’ on the Omnia.
* then unplug your Omnia from USB.
II-Install Android:
* On your Omnia, open file manager and go to > ‘My Storage’ > ‘o2beta’.
* Launch haret.exe and click ‘YES’ to boot Linux and install Android on your MicroSD card.
III- First launch
* On your Omnia, open file manager > ‘My Storage’ and launch ‘haret.exe’ directly from that folder, so not the one you launched at step 2. Click ‘YES’ again.
* Linux will boot again and after a couple of minutes you should see Android start. DON’T TOUCH IT! Press and hold the Omnia’s shutdown (end call) button and press ‘reboot’. Wait for WM to start again.
IV- Install B7610 updates
* Connect your Omnia to the computer in ‘My storage’ mode again. Go to the folder you extracted AndrOmniaPro, open the folder called ‘ Kernel-B7610-froyo-REV51′ and select the following files:
- ‘o2b3update.tar.gz’
- ‘zImage’
* Copy both files to ‘My storage’ on your Omnia and overwrite ‘zImage’.
V- Final touch:
Unplug your Omnia from the computer again. You can now use Android by running ‘haret.exe’ directly from ‘My storage’ like you did in step III
Note: On the first few boot attempts Froyo may report a few errors and it may freeze (when it freezes, use soft reset button and reboot), but that will get better and disappear as you just keep using it.
Powered by VDWWW.

Installing Froyo on the Samsung GTB7610
hello,
The following error occured on my phone when installing Andromnia Pro.
After succesfully formatting the Micro SD card the error " can''t find ext4.tar.gz on My Storage, rebooting in 10seconds"" . I''ve looked on my SD card and the ext4.tar.gz is on it. Can someone explane to my what go's wrong?

not able to mount root device
ruroba said:
hello,
The following error occured on my phone when installing Andromnia Pro.
After successful booting in 10 sec mobile gets switch off & when we do again HARAT.EXE, it again reboot but after that it unable to mount the root devices & it shows"cannot open root device mmcblk1p2" error; so guys plz let me knw how to resolve this matter.
Thanks & regards,
Abhijeet
Click to expand...
Click to collapse

Amazing
Its amaizing !!! It actually works , but i don't have wifi , camera and more other apps , how can i have them to? Thank you very much!
:good:

abhi1234567890 said:
ruroba said:
hello,
The following error occured on my phone when installing Andromnia Pro.
After successful booting in 10 sec mobile gets switch off & when we do again HARAT.EXE, it again reboot but after that it unable to mount the root devices & it shows"cannot open root device mmcblk1p2" error; so guys plz let me knw how to resolve this matter.
Thanks & regards,
Abhijeet
Click to expand...
Click to collapse
Only use sd cart from 2 to 4 g never bigger.
Click to expand...
Click to collapse

Stuck
Hi,
I am not really an expert at this, but mine freezes the whole time at r5:00000000 r4:00000000
I Have tried what the note says but doesnt work.
tried at least 15 times.:crying:

my samsungb7330 omnia pro dnt show me 02b3update whn i exctract
my samsungb7330 omnia pro when i extract the files to the folder on de computer i dnt get 02b3upadte . and aftr coping files to my storage card whn i run de installing process 2second its error says dnt hav somthng to handle help me plz n let me knw if my samsung dnt run andromnia

Guys, Please Help! My Omnia Pro 7610 stucked on installing andromniapro
My phone "freezed"with 15.3097661] r5:00000000 r4: 00000000

installing androminopro on b7610
Hi,
in installing androminopro on b7610
I am not really an expert at this, but mine freezes the whole time at r5:00000000 r4:00000000
I Have tried what the note says but doesnt work.
tried at least 15 times.

tools for wave723

hello, nobody has any idea of tools for the Wave 723 ReMaker and trix do not work either the stune.

What exactly NOT work?
Alternate Tool instead sTune is TkFileExplorer_2.4.exe
But as I remember maybe correct, only some settings need to change in menu... for proper work.
Best Regards

Thank you very much mate Adfree
I have entered it the internal menu:
1. * # 7092463 * #
2. 3 Device test
3. 6 Common
4. 3 USB Configuration
5. 1-On TkFilexplorer
and we agree with the button then hang Ajutes, Connectivity, select USB Utilities Debugging USB 1.06 and ready stune recognizes internal files, patience takes a few seconds to load all the files.

[Guide]how to get downloaded files to PC from Windows phone using UC browser

You need
1. WIndows mobile device center
2. Zune
3. Fully unlocked (not tested on other unlocks)
4. UC browser (may be possible with other browsers)
0. Initially download a test file in UC browser and note the size and file name (this is to find download location)
1 .Connect your phone, open zune, and finish syncing.
2 .After complete sync, open WMDC in PC and phone (check WMDC thread for more info)
3. When your phone is detected and connected in WMDC (in PC), open my computer and your phone's storage devices will be shown there .
4. Now open storage / application / data and search the file name and you will get the download folder . Eg:- {Computer\HTC HD2\\\Applications\Data\6CDA5651-56B9-48B0-8771-91DBC188F873\Data\IsolatedStore\Download}
copy this location into some text file for easy access .
5. enjoy.
some screen shot

Can you go to everything? because so can you catch the Qcom file from the Lumia 800?

bartjuhhbartyow said:
Can you go to everything? because so can you catch the Qcom file from the Lumia 800?
Click to expand...
Click to collapse
if you phone is fully unlocked, may be you can take almost all file from phone(not sure) . if its bootloader you are talking about you might need to contact cotulla .

thread moved and cleaned.

background downloads
background downloads can be find in:
{Computer\HTC HD2\\\Applications\Data\6CDA5651-56B9-48B0-8771-91DBC188F873\Data\IsolatedStore\Shared\Transfers}
I wouln't find it without sathara, so big Thanks to You

[GUIDE] Run Free Hyper-V Server in Desktop Mode

Hi All,
This is my first guide on XDA and this might not be the right topic but it's related. (This is for Advanced users)
I want to start this thread to show how you can use Microsoft's Free Hyper-V Server for more than just "Hyper-V".
I have done tests with Hardware and VMWare Player (V5) with both Hyper-V 2008 R2 & Hyper-V 2012.
System Requirements;
http://en.wikipedia.org/wiki/Hyper-V#System_requirements_and_specifications
And more specifically;
http://en.wikipedia.org/wiki/Hyper-V#Microsoft_Hyper-V_Server
Download a Free copy of Hyper V Server; (It’s free, so no Install key required!)
http://www.microsoft.com/en-us/server-cloud/hyper-v-server/default.aspx (You might need to register)
I have successfully used VMWare Player 5, Version 4 works for Hyper-V 2008 R2 but not 2012.
If you are trying this on hardware directly, you’ll also need to download your system’s drivers (at a minimum the Network Card) and a web browser
. i.e. Chrome downloader from: https://www.google.com/intl/en/chrome/browser/ (Tested to work correctly in Hyper-V Environment) Save these to a USB stick.
Anything else can be downloaded once Hyper-V Server is up and running.
Follow the Hyper-V installation as usual (all defaults)
As a guide; Select Custom Installation, you'll need more than 10GB hard drive size after we add extras, so pick 20GB as a minimum. wait for the re-boot
At this point you'll be asked to set a password and you'll get a command prompt for a user interface.
That's right, Desktop, control panel, Start menu, Metro, Task Bar, System Tray, Internet Explorer are all User interface elements that are removed from this copy of windows.
This is where this [GUIDE] starts to provide non-standard information;
Let's start by Installing your Drivers. (I'm assuming you know how to use the command prompt to change drive letter of your USB drive and launch the driver installer program.)
OR in VMWare case, on the menu select Install VMWare tools. This will not launch automatically, hence you'll need to use the command prompt to change to your CD/DVD Drive and launch the "Setup.exe" for VMware tools.
Now start the installation for Chrome, similar to above.
Now Chrome is running, Close the prompt to select default browser (it's your only browser...)
Sometimes I have found Chrome to crash with a dinput8.dll error (no all websites), Chrome works with this prompt up, but it's nicer to avoid it prompting.
http://www.driverskit.com/dll/dinput8.dll/585.html * We'll get back to this later...
You'll need to be uncompressed the above file, so lets download 7Zip also
http://www.7-zip.org/download.html
Now we need a file manager, since there is no Windows Explorer (or now called explorer) Explorer2 (x2) fits the bill nicely.
http://www.zabkat.com/x2lite.htm * Free Light Version (There are issues with not displaying some files, That because it’s a 32bit application that is not 100% compatible with a 64bit environment), The Pro Version is US$29.95 and is available in 64bit. When you install this, select the option to replace Explorer (note: there is no explorer, so this option allows explorer2 to handle some calls to explorer)
Now download a Start menu, Taskbar “desktop” replacement http://www.emergedesktop.org/* Free and customizable.
- Lets customize the Emerge desktop,
- If not started run “C:\Program Files\Emerge Desktop\emergeCore.exe”
- Lets start by removing menu Items that are broken due to not having a full copy of windows.
-- Settings, Configure Core, Click on emergeLauncher.exe, the press the Cog.
--- Delete “Homepage”
--- Delete “Executable %AppletDIR%\documentation\...”
--- Delete “ Tutorial”
--- Add Type “Live Folder”, Folder “C:\Users\Public\Desktop” (Click Save)
-- Settings, Configure Core, Click on emergeTasks.exe, the press the Cog.
--- Change Icon Size to 16x16 (Click OK)
- Start menu (or right click any where on the desktop) select Desktop Display, right click, Delete.
Now any new program that puts a shortcut in this folder “C:\Users\Public\Desktop” will appear on the launch Task Bar.
For some "Control Panel" replacement options download a GUI for managing some windows features (These projects help to speed up initial configuration;
http://corefig.codeplex.com/ Corefig for Windows Server 2012 Core and Hyper-V Server 2012
https://coreconfig.codeplex.com/ for Windows Server 2008 R2 x64 Core edition
This together with Sconfig can do quite a bit of windows configurations without resorting to the command line.
Ok the dinput8.dll.zip you downloaded earlier, you can un-compress this and put the dll (not the zip) in to the C:\windows\system32 folder.
If you want to make re-starting faster and don't plan on using Hyper-V, lets remove it. (coreconfig I think has this option but the following will always work) In a command prompt window type the following;
start /w ocsetup microsoft-hyper-v /uninstall
(Windows will need to restart a couple of times to do this)
(Optional) Enable a network share (You can use this like a Network file Server now, I don't know if there is a limitation to the number of connections like in desktop versions of windows)
net share /Grant:Administrator,FULL system=c:\
Remote Desktop Concurrent Users limit: 2 (one console, one remote OR two remote) (1 UP on a windows workstation copy)
Enable with from the Sconfig utility..
If you want to run SQL Server (Tested with 2008 R2) you'll need DotNet3.5
In a command prompt window type the following;
DISM /Online /Enable-Feature /FeatureName:NetFx3 /All
I did this as a test a while ago and I think that is all I needed to do and it worked. (I have gotten it to work, so it would be interesting on how much it can be pushed on this platform)
Need Java? Download Java http://java.com/en/download/
Need to use Office Documents?; http://www.libreoffice.org/download
Need FTP Server?; https://filezilla-project.org/download.php?type=server
Need Web Server?; http://mirror.mel.bkb.net.au/pub/apache//httpd/binaries/win32/
Need QEMU support? http://qemu.weilnetz.de/w64/
I used the built in Windows Updates (option 6 on the Sconfig utility) but I also prefer to use: WSUS Offline http://wsusoffline.net/
WSUS will also quickly get you copies of Silver light & C++ run times (or you can find the URL's manually), I find it's best to use both, WSUS Offline for quick offline copies and windows updates for the latest Microsoft has to offer... (I did not say latest & greatest...)
Work in Progress (probably not going to happen without 3rd party work).
Need Sound? (Don’t know of a solution yet…) I saw someone working on this with Server 2012 Core but I did not find the solution or if it would work with hyper-V copy.
Need Direct X? (Don’t know of a solution yet…) I've tried downloading -redist copies, etc but Direct X has been integrated into windows for years and this is the copy it's removed from.
I'd also want to get VMWare Player working or similar for the USB Pass through feature and 3D client support but I'd probably have to use an alternative. (I heard of a USB Driver for windows to share over Ethernet to another copy of windows)
Okay, this is all I have got for now, your thoughts?