Is there a way to change the default wifi client ID that is transmitted to the wifi router when the phone is connected?
The default seems to be 'android_<somereallylongnumber>'
Is there a way to change this? It just helps sort out which devices are connected to which routers.....I've got something like 30+ wifi clients connected to numerous routers at home....it gets complicated sometimes.
I've noticed more and more devices are coming with an option to let you define the wifi Client ID that gets reported.
Related
Hi,
I'm experiencing a weird problem and please let me know if it's only my problem or there is some work around for it.
My phone is SX66 upgraded to 1.40 ROM + 1.13 Radio stack
I can connect Wifi fine whenever I have some phone signal (at work). Whenever I go home where the phone signal is weak then the WIFI couldn't get connected (I believe I set up my home network correctly as I've been using it for so long and configure it for several computer/laptop in house). The network could detect the AP with the SSID but I just couldn't connect to it even I'm sitting right next to the AP.
ROM 1.40
Radio: 1.13
MDD
Are you sure it isn't connecting? What has led you to this conclusion?
Is it possible that it is connecting, but that you just can't browse the internet, in which case check your connection proxy settings. If your work uses a proxy server and you've enabled the pass-through setting in ActiveSync, your network connection may be configured with your work proxy server.
If you're sure you're just not connecting however, things to check are;
WEP/WPA Encryption - If you're using it and have other wireless devices on your network, you no doubt know what to do. If not, say so & I can help you.
DHCP - Does your router/AP support Auto-IP Addressing? Is it enabled? If not, you'll have to configure the WiFi card with a static IP within the same subnet as your router. Ask if you need help.
MAC Filtering - Are you blocking unauthorised MAC Addresses (on your router/ap)?
Interference - Wireless A/V Senders and digital cordless phones are common culprits for RFI. 802.11x APs support multiple channels (most default to channel 11), and you can change these in case of interference. Once again, if you have other WiFi gear already connected with good, strong signals, you can probably discount this one.
Sorry if this is all elementary to you - I don't know how technical you are.
Thanks for your reply.
> Are you sure it isn't connecting? What has led you to this conclusion?
Yes, I've check wireless status on the phone. "Connected to the network", and the AP with DHCP on showed the status of an IP has been allocate to the SX66 mac address. However I dont' really believe it then I check the "Adater", it said network available, and the WIFI icon just didnot show any traffic.
> Is it possible that it is connecting, but that you just can't browse the internet, in which case check your connection proxy settings. If your work uses a proxy server and you've enabled the pass-through setting in ActiveSync, your network connection may be configured with your work proxy server.
I've experience once with the internet connection via Active Sync so I disable the passthrough. Both home and work doesn't have proxy server so I selected not to have any on the phone.
> WEP/WPA Encryption - If you're using it and have other wireless devices on your network, you no doubt know what to do. If not, say so & I can help you.
At work, I have 128 WEP and the connection works fine with the key. At home, I open my network but using MAC filtering to protect it. I have problem with the open network one at home. Perhaps, I will try to setup WEP at home and see if it can work.
The only thing I'm not really clear is the difference between setting "WPA" and "WPA-PSK" from the phone.
> DHCP - Does your router/AP support Auto-IP Addressing? Is it enabled? If not, you'll have to configure the WiFi card with a static IP within the same subnet as your router. Ask if you need help.
Yes, DHCP enable as I don't want to change it back and forth when traveling.
> MAC Filtering - Are you blocking unauthorised MAC Addresses (on your router/ap)?
I do it and I already opened the network and then captured the MAC address into the AP memory. (that's why I think it's connected but will check).
> Interference -
Not really, I'm 6' away from the AP and I don't have any cordless device in my computer room.
> Sorry if this is all elementary to you - I don't know how technical you
are.
No problem, I'd like to learn more about this PDA. The concept is about the same with PC, but the tools to debug is not there. I can't use tracert/traceroute, ifconfig or ping broadcast to really know if I'm the network.
Once again, thanks a lot.
Okay, well it sounds like you're on the right track & know what you're doing.
A useful troubleshooting tool, which gives you tracert, ping, whios, ipconfig and a host of other tools is "vxUtil", which is freeware. I'd give you a URL for downloading it, but I'm on my iMate now (sipping coffee by the Yarra in a Melbourne Cafe - oh what a techno-wanker am I!), but search these forums or Google it and you'll find it.
Now, regarding the proxy thing... These PPCs are a little tricky with their internet settings, and I had to create a different 'connect using...' connection profile, if that makes sense. The important setting within the profile, which is under the Proxy tab, from memory, is "This network connects to the internet".
Now for some reason, if you don't enter in a proxy server here, that check-box doesn't stay checked when you ok your way out. So what I've had to do is go into the advanced area & enter anything in the "wap" proxy, then ok out.
Strange, but it seems to work. Although I always leave my "Private network" on "My Work Network", I can now browse the 'Net through the WiFi AP/Router.
Download vxUtil & see if you can ping your AP, then go from there.
I've worked around the problem by using static IP address instead of depending on DHCP. Thanks to Hitchhiker software. I noticed that it was trying to obtain IP address from DHCP but failed. (The very same DHCP work wells for the rest of my network). Anyway, I will use Hitchhiker to switch IP back and forth if necessary.
Thanks a lot!
MDD
Great to hear you found the problem - well done.
My wife and I both have evo's. When at home on wifi my netgear wgr614v7 router seems to have issues connecting both properly. It seems to be a device name problem. Both phones have the same name, different mac addresses but the router us giving them both the same ip address. I have setup static routes to each phone, which helps get different ip's, but I'm still having connection problems with one phone when both are being used.
Is there a way to change the name that my evo broadcasts to my router?
Hers is stock and I am using Fresh's rom.
travlincablguy said:
I have setup static routes to each phone, which helps get different ip's
Click to expand...
Click to collapse
They will anyway get different IP's (I'm talking about private IP 192.168.*.*), for device id maybe someone can edit that in .wireless tether .apk for you because as far I can see that part is kind of integrated and hidden inside.
I am not using the tether function. The static route I setup ensures that every time my evo with it's mac address ending in :d2 always gets 192.168.0.6, Heather's phone is always .3.
Thanks for your input, but I don't think you understood what I was asking.
travlincablguy said:
My wife and I both have evo's. When at home on wifi my netgear wgr614v7 router seems to have issues connecting both properly. It seems to be a device name problem. Both phones have the same name, different mac addresses but the router us giving them both the same ip address. I have setup static routes to each phone, which helps get different ip's, but I'm still having connection problems with one phone when both are being used.
Is there a way to change the name that my evo broadcasts to my router?
Hers is stock and I am using Fresh's rom.
Click to expand...
Click to collapse
I'm thinking you could change the device name in the build.prop in the system folder.
Ahhah, thank you sir, I will look into that.
Edit: after looking threw build.prop I could not find the device id. Which is a bummer. I finally talked my wife out of her iphone and she is now a bit pissy about not being able to use the internet at the same time. No 3 or 4g service at the house either. We have to use an airrave to talk on the phone.
What's the device name in your router?
Also, FWIW, your router shouldn't have any problems with two different MAC addresses connecting. DHCP ID is irrelevant. It sounds more like your problem is a bad router, you're on the edge of its range, or there's something deeper wrong (ie, some other piece of network hardware). As far as I know, you can't change the DHCP Client ID on the phone. It's always been android_(sting of letters/numbers) for me, and it correlates with the Exchange device ID (if you use an Exchange account).
That is the id that shows up. I am thinking the router needs to go. I cannot live without any of the devices that I have connected to it. I do appreciate your insight.
Heh, you good sir are in luck:
http://review.cyanogenmod.com/#change,2164
http://review.cyanogenmod.com/#change,2165
CyanogenMod 7 ('unno about 6) just got a feature to let you change the DHCP client ID.
At some points in your life, one of your Android devices connect to a wifi router, but can't connect to the internet. However, your computer, laptop or iPad will connect to that same wifi and use the internet just fine. I've looked everywhere on the internet for solutions, some of them are:
+ Turn off and on both modem and wifi router
+ Factory reset wifi router
+ Battery pull your phone, wait 30s and put it back
+ Reflash stock or custom ROM
+ Change DHCP IP setting to Static
+ Disable security (WEP, WPA) on wifi router
+ Check DNS server, gateway IP address for correctness
Fortunately, I stumbled upon this old thread last night -> http://forum.xda-developers.com/showthread.php?t=1371794
It helped fix the internet connection temporarily, turning off and on wifi on phone caused the issue to repeat.
In summary, he found out the correct MAC address for gateway was mismatched with the one on his phone. Even though the gateway IP address is correct (example: default gateway IP 192.168.1.1)
Upon further investigations, I found out my Wifi ROUTER has the same IP address with my MODEM (192.168.1.1) This IP conflict causes the phone to recognized the WIFI ROUTER's MAC address as the gateway's MAC address. This problem mostly occurs on Android phone, not computer (I'm no tech savvy so I have no idea why)
Simple fix: Go to wifi router setting page, change the IP address on wifi router to different number (other than default 192.168.1.1), and the problem should be fixed.
Please help spread the words to fellow Android lovers, I'm sure a lot of us have struggled with this problem :laugh:
I'm one guy who is desperately looking for a solution to this.
Unfortunately the solution you gave didn't work.
Hi
i have a problem with wifi. it remains connected but loses internet access randomly. i found this solution:
"In the wifi networks, select the network you want and select ‘Forget network’
Turn off the wifi
kill all the apps with your task manager
Turn on the wifi again
Connect to the network
Check the internet connectivity
If still the problem exist, switch off the phone and redo the above steps"
it solves the problem, but it happens again after some minutes. actually, i also installed an app named "wifi fixer" which does the above process automatically. when the program is active, it turns the wifi off and on every 2-3 minutes. and the phone has internet access when the program tuns the wifi on.
any idea?
Turn off wifi optimization on some android phones help.
Sent from my Nexus 7 using Tapatalk 4
(bump) By any chance, are you all using Aztech's router? I have the same problem with my Aztech router.
solution?
---
Had the same problem for several months. Changed my router and everything became prefect.
Sent from my Galaxy Nexus using Tapatalk
---
---
2 years after the last reply I am having the same problem. My wife and kids all have internet access on their phones, tablets, desktop and laptops all from the same modem router yet I am unable to use the internet on my Galaxy S2 mobile phone even though my phone says connected to Wi-Fi Network Netgear 06.
The Mac address solution provided isn't applicable to my situation as my Mac address on my mobile is different to my modem router Mac address.
Any other solution?
So, weird thing started to happen last night. Both my Samsung devices ( my 2014 10.1 and my S4) started failing to get an IP from my wifi network. It would see the wifi network and report a strong signal, but would fail at the obtaining IP address. The IP assignment is handled by a Windows DHCP service running on a domain controller. I work in IT so I have a fairly extensive lab at home with routers, switches, servers, domain controllers, etc. The wireless access point in my home is a WNDR3700 with no WAN port config as my firewall/routing is done by a Cisco ASA 5505. All the 3700 does is provide wireless access to the network, essentially it acts solely as a wifi AP. Every other wireless device on the network is functioning fine including 3 laptops, a Blackberry and two other Android tablets ( Asus Transformers). So I know nothing is wrong with the dhcp or the AP in general. It's not a security issue as it is not failing on authentication, just on obtaining IP. So as a workaround I configured each one with a static IP and, of course, everything works fine.
One thing I noticed that seemed odd was that when I went to change the IP addr the address that was already in there, but greyed out sort of, was the wrong network for my home wifi. The phone and tablet both looked like they had a 192.168.1.0/24 address whereas my home wifi segment is 192.168.0.0/24. So maybe that had something to do with it. At the office now and both my phone and tablet have no issue connecting to our Cisco APs and getting a dhcp config from a Windows DHCP server. So pretty weird situation. I'm fine with leaving them on static config while on my home wifi network. Was just wondering if anyone else has seen this before?
Thanks
For any that might be interested. I used inSSIDer to find a less crowded channel for my 2.4 ghz band at home and both my Samsung devices are connecting and receiving ip addrs now.
Background
I live in the stix and my only source of internet is my 'unlimited' data plan via phone carrier which also 'allows' me to tether.
This gives me about 15meg download on 58-65 ping which is really nice especially as there is no extra charge for the data I use.
Issue
Recently I started getting random 'limited' connectivity.... which of course means no net connection and to fix I discover the 'Default gateway is not available' and the adapter needs resetting. This solves the network connection.... but a complete nightmare if I'm downloading a big file that can't be torrented and I have to start again. I've tried changing from 'Obtain IP address automatically' to manually setting the IP address,subnet mask and default gateway but this random dropout to 'limited' persists.
I installed Vistumbler to check traffic and discover I'm broadcasting on channel 6 which is populated with lots of other traffic (5 other networks near by using channel 6) and figure this may be a potential cause. (someone else disconnecting from channel 6 at shutdown maybe...?... but that's a wild guess) So only way to discover how to stop this happening is by a process of elimination.
Question:
Does anyone know which 3rd party Wi-Fi tethering app will work on Lollipop and can change the broadcast channel number of my wifi hotspot from my Z1c running CM12...?