Ok so the usb port on my HD2 is broken, so I thought I'd be slick and pop my sd card in the gf's slide to transfer a bunch of files to my card. All went well, til I put her card back in the slide and when i booted it back up, all her apps were gone. I put the chka2sd command in terminal emu, and it said apps were running from phone memory. So I tried the command a2sd reinstall, and it wouldn't go, it said ...to preserve boot integrity, yada yada, the ext is not mounted.
so my question is:
What command do I enter to re-mount the ext2 partition?
Sorry for being such a noob, and tia for help
Let me see if I got it... your gf's slide sdcard was just removed from the phone and then placed back in but the apps are gone? That's really weird o_o
All I can think of as a possible solution is to go into recovery and flash the apps2ext add-on package, that's the one that mounts the ext partition.
Sent from my T-Mobile myTouch 3G Slide using XDA App
It happens when you remove the sd card/sd card is removed while the phone is on.
Sent from my T-Mobile myTouch 3G Slide using XDA App
agentg1001 said:
It happens when you remove the sd card/sd card is removed while the phone is on.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
I did the same thing though, removed my sd card with ext mounted to load files from my computer onto it, since I don't have a usb cable, and when I put it back in, my apps wouldn't load. I just rebooted and it fixed it.
I think that putting YOUR sd card in screwed it up though. You might try typing a2sd cachesd in terminal emulator. That's what enables a2sd. But i'm not sure if that will clear the ext partition before it enables, although I don't see why it would. It only wipes when you partition the card.
Thanks guys, I'm gonna try n re-flash the activator, and try [email protected] reinstall again. I got Android to mount the ext2, but when I try the reinstall command in terminal emu, it says it can't because the ext2 is mounted r/o. I'll get it, just gonna be a pain. Worst comes to worst, total fat32 partition and format, and start all over.
huggs said:
Thanks guys, I'm gonna try n re-flash the activator, and try [email protected] reinstall again. I got Android to mount the ext2, but when I try the reinstall command in terminal emu, it says it can't because the ext2 is mounted r/o. I'll get it, just gonna be a pain. Worst comes to worst, total fat32 partition and format, and start all over.
Click to expand...
Click to collapse
If she was using titanium to back up her apps you could reformat the ext2, redo the whole a2sd cachesd in terminal and then restore her apps, but if there were backups you probably would've already thought of that.
It wouldn't be able to reformat or restore the apps to the ext2, because it's mounted as read only.
I think I borked the sd card, as far as being able to use it for a2sd
due to being mounted r/o, gparted won't recognize the ext2, a2sd won't reinstall because the ext2 is r/o, and the phone acts crazy if i flash the a2sd enabler zip, probly cause it can read the ext2, but cant write to it
looks like time for a new sd card, unless somebody can tell me how to change the r/w permission for ext2
huggs said:
It wouldn't be able to reformat or restore the apps to the ext2, because it's mounted as read only.
I think I borked the sd card, as far as being able to use it for a2sd
due to being mounted r/o, gparted won't recognize the ext2, a2sd won't reinstall because the ext2 is r/o, and the phone acts crazy if i flash the a2sd enabler zip, probly cause it can read the ext2, but cant write to it
looks like time for a new sd card, unless somebody can tell me how to change the r/w permission for ext2
Click to expand...
Click to collapse
Why don't you just delete the partition with gparted? You may not be able to modify it but you can certainly blow it out of the water. Just reformat the entire card to fat32 then repartition it. I even think you can do that with windows. Windows won't recognize it as ext2, but it will recognize it as an unknown partition and allow you to delete it.
MusicMan374 said:
Why don't you just delete the partition with gparted? You may not be able to modify it but you can certainly blow it out of the water. Just reformat the entire card to fat32 then repartition it. I even think you can do that with windows. Windows won't recognize it as ext2, but it will recognize it as an unknown partition and allow you to delete it.
Click to expand...
Click to collapse
GPartEd doesn't even see the partition, and I don't know how to do it with Windows, I've always used Linux for all my partitioning.
IDK, maybe all this has corrupted the card somehow?
She's using my HD2 at the moment, so it's definitely not killing her, but I don't know what to do at this point.
Wouldn't the partition be untouchable though, since it's read-only now?
huggs said:
GPartEd doesn't even see the partition, and I don't know how to do it with Windows, I've always used Linux for all my partitioning.
IDK, maybe all this has corrupted the card somehow?
She's using my HD2 at the moment, so it's definitely not killing her, but I don't know what to do at this point.
Wouldn't the partition be untouchable though, since it's read-only now?
Click to expand...
Click to collapse
Read only only means that you can't write to the partition, you can still delete it and stuff, it doesn't lock it completely.
In windows, go to start, right click on computer, click manage, and double click on disk management. When it loads it should show all of your drives and their partitions. Look for the memory card you are trying to modify, and there should be a partition of unknown type or something listed. It MIGHT be green outlined, but I don't remember for sure. Right click on it and click delete, it should warn you that the partition might be in use by other OSes but just ignore it, click okay, and then you should be able to right click on the fat32 partition, click extend, and extend it into the unallocated space that was left by the deletion of the ext partition.
Was able to delete the ext2 using gparted. Thanks guys, I really appreciate all your help and suggestions.
huggs said:
Was able to delete the ext2 using gparted. Thanks guys, I really appreciate all your help and suggestions.
Click to expand...
Click to collapse
No problem, happy to help!
Sent from my T-Mobile myTouch 3G Slide
MusicMan374 said:
Read only only means that you can't write to the partition, you can still delete it and stuff, it doesn't lock it completely.
In windows, go to start, right click on computer, click manage, and double click on disk management. When it loads it should show all of your drives and their partitions. Look for the memory card you are trying to modify, and there should be a partition of unknown type or something listed. It MIGHT be green outlined, but I don't remember for sure. Right click on it and click delete, it should warn you that the partition might be in use by other OSes but just ignore it, click okay, and then you should be able to right click on the fat32 partition, click extend, and extend it into the unallocated space that was left by the deletion of the ext partition.
Click to expand...
Click to collapse
hey i have partition my sd card using rom manager... i completed my process but my 2nd partition is unmounted i cant find it anywhere... not even the way u told... can i mount it if not can i at least delete it... pls help me
Related
Hi guys,
I couldn't find anything about this (I did try searching before posting this thread, so I hope I am not repeating a common question!).... I wish to unpartition my sd card and just go back to a normal fat32 partition....
So far I have tired windows disk management and Rom Manager, which just allows you to ADD a ext partition with no luck!
Can anyone else guide me how to achieve this?
Regards!
Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night
cargobr151 said:
Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night
Click to expand...
Click to collapse
:O Thanks, which recovery should I be using? :s
System recover? clockworkmod using the fake flash method? because I don't see the Partition SD Card menu anywhere else and i've tried both!
I know its right in front of me somewhere, I just can't see it, D'oh!
use the one from rooting folder
Bah,
I ended up using GPart live cd to undo it!!
Thanks for the responses guys, hopefully this will help someone else who needs it!
cargobr151 said:
Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night
Click to expand...
Click to collapse
Sorry for using your thread, however I don't have that Partition SD Card option on my Desire, when I go into recovery?
jacobtc said:
Sorry for using your thread, however I don't have that Partition SD Card option on my Desire, when I go into recovery?
Click to expand...
Click to collapse
That's fine, it's why I created the thread!
If you just want to partition you can use ROM Manager (but this requires root)
you need the recovery file (entitled 'pushfiles' or something) from the risk-free root package to partition/un-partition the card.
Else, you can use a GPart live CD, which makes it really easy!
Hope that helps buddy...
r5ingh said:
That's fine, it's why I created the thread!
If you just want to partition you can use ROM Manager (but this requires root)
you need the recovery file (entitled 'pushfiles' or something) from the risk-free root package to partition/un-partition the card.
Else, you can use a GPart live CD, which makes it really easy!
Hope that helps buddy...
Click to expand...
Click to collapse
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
However in recovery, when I try to mount sd-ext it fails to do so Don't know why...
jacobtc said:
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
However in recovery, when I try to mount sd-ext it fails to do so Don't know why...
Click to expand...
Click to collapse
If you're using a2sd+ then you need to change your ext2 partition to ext3, Also, I don't believe that you need a swap partition anymore...
Try that!
r5ingh said:
If you're using a2sd+ then you need to change your ext2 partition to ext3, Also, I don't believe that you need a swap partition anymore...
Try that!
Click to expand...
Click to collapse
Cool, now I can mount the ext partition in recovery! Thanks!
jacobtc said:
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
Click to expand...
Click to collapse
Was that a 16gb card or a 265gb?
Sent from my HTC Desire using XDA App
GANJDROID said:
Was that a 16gb card or a 265gb?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
lol, lets give the guy a break.... we all know it was a 256GB Flash card!
Anywhooo, I have another question, so I think i'll hijack my own thread!
Guys, whats the most efficient way to backup/restore and move apps between roms? I've ended up manually re-installing installed apps 2/3 times now, I was going between roms that did/didn't support a2sd. Also, should there be any consideration to any specific backup options available in the various tools?
Thanks in advance!
Hi, my phone got bricked using GPart live to turn my ext 2 into a 3 partition. Everything went fine using the program, turned off Usb storage, went into market and tried to download a program, when it started to install the screen when black.
Now I cant boot with sdcard in, I don't come past the white HTC screen
Without SDcard it starts loading the system but the loading is a never ending loop.
Tried to format SD with fakeflash, dosent help
Tried reflashing my rom with wipe and everything, dosent help
Any ideas?
prove said:
Hi, my phone got bricked using GPart live to turn my ext 2 into a 3 partition. Everything went fine using the program, turned off Usb storage, went into market and tried to download a program, when it started to install the screen when black.
Now I cant boot with sdcard in, I don't come past the white HTC screen
Without SDcard it starts loading the system but the loading is a never ending loop.
Tried to format SD with fakeflash, dosent help
Tried reflashing my rom with wipe and everything, dosent help
Any ideas?
Click to expand...
Click to collapse
I would say, firstly try to get your phone working by wiping it clean and re flashing the rom. Use a different memory card just to get up and running. Then you can concentrate on fixing you card..
Although that seems like a very strange issue, are you sure you formatted your card correctly with GPart? (eg, exactly 512 MB/1024MB?) I'm a n00b myself so I would also wait for some of the more experienced users to offer their input. lol
r5ingh said:
I would say, firstly try to get your phone working by wiping it clean and re flashing the rom. Use a different memory card just to get up and running. Then you can concentrate on fixing you card..
Although that seems like a very strange issue, are you sure you formatted your card correctly with GPart? (eg, exactly 512 MB/1024MB?) I'm a n00b myself so I would also wait for some of the more experienced users to offer their input. lol
Click to expand...
Click to collapse
Solved it by using AM recovery, repair + new partition solved the problem! Gonna reflash 2.0 again since i messed up the wiping somehow and then keep this until the rooted 2.2 is out!
Hi sorry if this has been answered but couldnt find it.
i recently purchased a a bigger size micro sd card for my htc desire. The phone will not turn on with the card in, nor can i format it in the recovery memory. Can someone tell me what i need to format it as on computer. GPT MBR, FAT 32. etc etc. Thank you
I used Gparted in Linux to set up the standard layout:
- 32MB SWAP
- 512MB EXT2
- Rest FAT32
You can download a livecd of Gparted, or use "Partition SD Card" within ROM Manager.
You can download GParted for Windows aswell. Google it.
Or you can flash amon ra recovery and use that to partition within the recovery.
Also rom manager allows you to partition the card as well. I personally use 0mb for swap and 768mb for ext3. Do note rom manager only allows you to use an ext partition no bigger then 512mb. I assume it only formats it in ext2. My opinion is amon ra recovery is the way to go. Use version r5 as the latest is quite buggy according to other users. Or you can use gparted as mentioned earlier.
Misunderstood your post, use gparted. I didnt read that you cant turn on the phone with the card in it.
swap is not needed
Have you got / can you borrow a card reader for your PC, you can partition it from there
(Whys this under android dev?)
Sent from my HTC Desire using XDA App
schiznik said:
Have you got / can you borrow a card reader for your PC, you can partition it from there
(Whys this under android dev?)
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Report the thread.
It's already been done.
Can't hurt, though.
I'm also having a little problem with the partitions...
I have a 32gb card, but when i remove it from the card reader after making the partitions (or after disconnecting the phone from the computer) the only partition remaining is the FAT32...ext and swap become unloccated space :s
how can i fix this?
feelmyanger said:
I'm also having a little problem with the partitions...
I have a 32gb card, but when i remove it from the card reader after making the partitions (or after disconnecting the phone from the computer) the only partition remaining is the FAT32...ext and swap become unloccated space :s
how can i fix this?
Click to expand...
Click to collapse
You do realize that you can't use the SWAP and EXT partitions as drive-space, right?
feelmyanger said:
I'm also having a little problem with the partitions...
I have a 32gb card, but when i remove it from the card reader after making the partitions (or after disconnecting the phone from the computer) the only partition remaining is the FAT32...ext and swap become unloccated space :s
how can i fix this?
Click to expand...
Click to collapse
they are not accessable within windows
i know, i used gparted. but when i remove the sd card/disconnect the phone from usb mode the partitions are gone :|
zHk3R said:
You do realize that you can't use the SWAP and EXT partitions as drive-space, right?
Click to expand...
Click to collapse
yes, but i'm not talking about the space...the entire partition itself dissapears. for example, if i'm going to flash a rom that need an ext partition it won't flash...the ext partition is gone
one question,
should the ext partition be in the front or at the back of the FAT32 partition?
or it doesn't matter?
i got my last question solved but I read somewhere that usin darktremors script would allow me to run widgets from sd card because the system thinks they are still in the correct place.
running GV1.5 partitions fat32/ext3/linux-swap.
I installed the script after mounting /data and /system from the recovery. After that I rebooted and ran the script commands. Moved a widget to sd card and it vanished from screen just like froyo.
what am I doing wrong?
I know you need to move the dalvik-cache for this to work. but recovery can't find sd-ext.
Huh? From what i know widgets will not work if u put them in the micro sd.
Sent from my HTC Vision using XDA App
lainvalenajr said:
Huh? From what i know widgets will not work if u put them in the micro sd.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Using stock froyo a2sd (apps2fat) will not allow you to run widgets. If you partition your sdcard (ext partition) and use the old style a2sd (apps2ext) using darktremors a2sd package you can run widgets from the sdcard. Along with putting the entire app, not just 1/2 or 1/4 of it, on the sdcard plus all of it's data (optional).
If it's easy for you to understand it as the phone thinking the ext partition is part of the internal memory, that's good enough since it's basically what's going on.
Spastic909 said:
I installed the script after mounting /data and /system from the recovery. After that I rebooted and ran the script commands. Moved a widget to sd card and it vanished from screen just like froyo.
Click to expand...
Click to collapse
What you did wrong is moving the app to the sdcard. The commands you run in terminal move the apps to the sd ext partition. Specifically this one:
Code:
#su
#cd /system/bin
#a2sd cachesd
It will still show it as installed to the internal memory because it thinks it is. Even in a file explorer under data/app it shows the apps but that's part of the *trick*.
If you go into applications and move it to the sdcard it puts it on the fat32 partition which is where the froyo version puts them - don't do that. That's what you did wrong.
KCRic... huh i didnt know that. Ill try that. Spastic u should try that lol
Sent from my HTC Vision using XDA App
i installed the busybox 1.18.0.git
wiped everything in recovery and from recovery ran the script. After I rebooted I ran the commands in terminal.
then my phone rebooted...does that mean it worked?
Spastic909 said:
i installed the busybox 1.18.0.git
wiped everything in recovery and from recovery ran the script. After I rebooted I ran the commands in terminal.
then my phone rebooted...does that mean it worked?
Click to expand...
Click to collapse
Yeah. You can use titanium backup to make sure. Just open it and you should see a bar at the bottom showing sdext available/free. Also you can use a file explorer - got to /sdext and you should see an app, app-private, dalvikcache, data, and one or two other folders listed. If you do then it worked.
You can also use terminal to have a2sd check and make sure it's working but I don't want to load the thread with commands I'll post them if you want to learn a bit though
Sorry to resurrect this thread, I thought it better than making my own.
I'm running CM 6.1.3 and have an 8GB SD card inside.
1) How do I check how the SD card is formatted? And if it doesn't have an EXT3 partition, how do I partition it property?
and 2) Is there an easy, non-terminal way to send apps to the EXT3 partition, akin to hitting "move to SD card" in android settings. And since, as you said, it moves all the data to the EXT3 partition, not just some, is it best to keep most of my apps there, to free up internal memory as best as possible?
And PS, when I'm partitioning my SD card, will I need to create a SWAP partition? 1GB for an 8GB stick?
Thanks so much.
EDIT: I'm on an X10 if that helps..
I have been trying to clone my 4gb class 4 sd card to the new 8gb class 6, but failed.
I am using Cyanogenmod 7 nightly and app2sd with data moved to sd. My computer OS is linux and I have android tools installed.
1. I partitioned new card with newest clockworkmod, which unfortunately results in ext2, not ext4 so I reformated ext2 to 4 using some partitioning software.
2. Copied content of fat32 partition from the old card, including recent nandroid backup.
3. Booted to recovery and tried restoring sd-ext several times, but I either get 'MD5 sum mismatch', or it starts fine but at some point it stops with error.
I then tried again but this time without reformatting ext2 to ext4 but the result was the same.
I also tried just copying sd-ext directly with 'sudo' but the phone acts just like the new installation then and even 'Fix Permissions' doesn't help.
Help!
I just recently did this myself two different ways, the first was to use acronis disk manager to clone the sd from a 8gb to 16gb. This worked fine but took an extremely long time.
I then upgraded from 4gib to 8 and created the partitions manually and copied over the data from one mount to another. Works fine here.
Did you try restarting your phone and double checking the partitions / types?
Plug both sdcards in the PC then use gparted to copy the two partitions across then grow the fat partition to fill the space if needed.
Sent from my HTC Desire using XDA App
mercianary said:
Plug both sdcards in the PC then use gparted to copy the two partitions across then grow the fat partition to fill the space if needed.
Click to expand...
Click to collapse
I have only one card reader in my laptop and connecting the card inside the phone makes the ext partition invisible for gparted. This makes copying partitions between two cards impossible.
impactor said:
I have only one card reader in my laptop and connecting the card inside the phone makes the ext partition invisible for gparted. This makes copying partitions between two cards impossible.
Click to expand...
Click to collapse
Put the phone in recovery, then mount USB, it works for me using amonra recovery.
Sent from my HTC Desire using XDA App
mercianary said:
Put the phone in recovery, then mount USB, it works for me using amonra recovery.
Click to expand...
Click to collapse
I am using newest ClockWork recovery and all I can see in gparted is the FAT partition. Not even empty space where EXT should be.
and thats definitely mounting USB mass storage not mount SD card?
Theres definitely FS issues on the new card if you're getting MD5 sum errors.
Firstly dont use anything other than gparted to partition (see signature).
Flatten the new card completely. Format any partitions that may be there out and start again, from scratch.
rootSU said:
and thats definitely mounting USB mass storage not mount SD card?
Click to expand...
Click to collapse
This is the only option in recovery menu. I think if I used something else, I wouldn't even see FAT partition. The ext is ext4, btw.
And we are talking the original card here, not the new one. The new one is in the reader.
impactor said:
This is the only option in recovery menu. I think if I used something else, I wouldn't even see FAT partition. The ext is ext4, btw.
And we are talking the original card here, not the new one. The new one is in the reader.
Click to expand...
Click to collapse
Which is the only option? What recovery?
If I boot into recovery and go to 'mount and storage', 'Mount USB storage' is the only option that actually makes the phone visible to the computer. There are pleny of mount/unmount (eg: mount /data) options above this one, but they're supposed to work internally.
Is it Amon-Ra / RMD? Does the size of the FAT partition tally with the total size of the card? did you say had a card reader? just use that if you have
ClockworkMod Recovery 5.0.2.0
If I switch cards, then the one in the phone will still be invisible and I need both at the same time to copy partitions.
Forget copying partitions. Your instinct with nandroid restore was right, however you need to get the fs on the new card sorted
Also I have noticed on ubuntu that the data copy remaining is inaccurate. I leave it for several minutes after it appears to have completed to ensure data is written before ummount
Sent from my HTC Desire using XDA App
rootSU said:
Forget copying partitions. Your instinct with nandroid restore was right, however you need to get the fs on the new card sorted
Click to expand...
Click to collapse
Except this doesn't get me anywhere. I tried with ext2, ext4, created in recovery or by gparted and every time got stuck on the same stage.
Then theres a serious issue that needs fixing. Best not to work around. The nandroid is the best option.
Have you a Windows machine? H2testw.exe is a great sd testing app
Sent from my HTC Desire using XDA App
Created partitions are not visible in Gparted if the card is in the phone, contrary to empty space. It took me many attempts in different configurations but I got it done, eventually, using gparted partition copying for EXT and regular copy for the FAT partition content
Hey everyone. I'm going nuts trying to figure out how to use Link2SD. I partitioned my 32G SD card using Mini Partition Tool. I made a 1 gig partition. I've tried FAT32 and EXT2. After partitioning, i rebooted and tried Link2SD. I keep getting the error "Mount script cannot be created. [1] Segmentation fault mount ..."
Is there any solution for the xperia play? I manually moved my apps but still ran out of space keeping system tools like Titanium Backup on the internal. Maybe I should make them System Apps?
I use the following on mine setup:
64gb Card (Fat32 - Primary)
5GB for EXT4 partition (Make sure when you partition it to set it as primary.)
300mb Swap Partition
I had an issue with Link2SD too ad it was because I was not setting the EXT partition as primary, oncei formatted it again as primary Link2SD had not issue with it. Try that.
ozzmanj1 said:
I use the following on mine setup:
64gb Card (Fat32 - Primary)
5GB for EXT4 partition (Make sure when you partition it to set it as primary.)
300mb Swap Partition
I had an issue with Link2SD too ad it was because I was not setting the EXT partition as primary, oncei formatted it again as primary Link2SD had not issue with it. Try that.
Click to expand...
Click to collapse
Hey thanks for the reply. Just tried what you said. My FAT32, ext4, and Swap are all Primary and sill no go. I get the same error (segmentation fault mount -t ext4...). When Link2SD opens I've tried selecting all the options for the parition type too and none of them work.
Anything else I can try? Does the order of the partitions make any difference? Right now I am Primary, ext4, Swap.
echardcore said:
Hey thanks for the reply. Just tried what you said. My FAT32, ext4, and Swap are all Primary and sill no go. I get the same error. When Link2SD opens I've tried selecting all the options for the parition type too and none of them work.
Anything else I can try? Does the order of the partitions make any difference? Right now I am Primary, ext4, Swap.
Click to expand...
Click to collapse
Ah.... okay, I should have clarified this, only the fat32 and EXT partition are set to Primary. Swap Partition is set to logical, setting all three to primary causes issues.
Reformat only the swap and format to logical. Then in Link2SD force it to reinstall the scripting and see if that fixes it.
ozzmanj1 said:
Ah.... okay, I should have clarified this, only the fat32 and EXT partition are set to Primary. Swap Partition is set to logical, setting all three to primary causes issues.
Reformat only the swap and format to logical. Then in Link2SD force it to reinstall the scripting and see if that fixes it.
Click to expand...
Click to collapse
Okay then. New problem. Now Link2SD says "No SD card present" and android doesn't mount it either.
This is killing me slowly.
I'll try to reformat the whole card via a reader...
Didnt work. SD card still not recognized.
echardcore said:
Okay then. New problem. Now Link2SD says "No SD card present" and android doesn't mount it either.
This is killing me slowly.
I'll try to reformat the whole card via a reader...
Didnt work. SD card still not recognized.
Click to expand...
Click to collapse
OK. If your willing, lets start fresh. I am guessing you have your SDcard files backed up. Using Minitool partition delete all partitions and format as FAT32. Then create another partition of your size and format it as EXT (I prefer 4, EXT4) and set it to EXT(2,3,4,etc) and Primary. Then just for kicks, do not make a swap partition. I read that its not necessary, however I always do it..... well necessary only if you use a swap manager. So after the fat32 and ext partitions are made and minitool has created them. Take out the card, put it back into your pc and see if windows sees the fat32 partition. If good place it back into your phone and see if it upon bootup sees your sdcard.
Just in case as a reference here is the tutorial from the developer of Link2SD on how to set it up.
http://www.link2sd.info/description
ozzmanj1 said:
OK. If your willing, lets start fresh. I am guessing you have your SDcard files backed up. Using Minitool partition delete all partitions and format as FAT32. Then create another partition of your size and format it as EXT (I prefer 4, EXT4) and set it to EXT(2,3,4,etc) and Primary. Then just for kicks, do not make a swap partition. I read that its not necessary, however I always do it..... well necessary only if you use a swap manager. So after the fat32 and ext partitions are made and minitool has created them. Take out the card, put it back into your pc and see if windows sees the fat32 partition. If good place it back into your phone and see if it upon bootup sees your sdcard.
Just in case as a reference here is the tutorial from the developer of Link2SD on how to set it up.
http://www.link2sd.info/description
Click to expand...
Click to collapse
PC sees the FAT32. Phone sees the card now. Link2SD shows the partition but cant mount it and create the script for it. Also tried as ext2. Thanks for your help. I am going to try to update the ROM.
After updating the ROM to 2.4.0 and waiting 10 mins and rebooting as usual. was able to successfully link the partition! Thanks for your help!
No problem. Glad you got it working.
Sent from my R800at using xda premium
Got all my apps installed! Woot! Also, something must have been messed up with my previous flash.. I wasn't able to restore apps the newer way from titanium backup. I had to do it the old way one by one.
phone is going to make a great gaming alternative to my SGSII.