Develop Bugs

Incredible + A2DP on Kenwood kiv bt-900?

Just had the new kenwood deck installed... Should do almost anything. I have my incredible paired up and calls are clear. Problem is A2DP audio streaming. Does not work. No A2DP device is found. Yes, the manual gives directions to play streamed audio once bt is synced. Well, its synced, got my phone book on there, and calls are being made.
Any thoughts or ideas to get streaming audio?

I don't have any help to offer, but I am experiencing the same problem with my Pioneer FH-P8000BT. Pairs for phone calls with no issue and everything is clear, but the radio does not even "see" the device as being available for A2DP.
I previously paired a few different HTC phones (all running Windows Mobile) with this radio with no issues. I'm hoping it's a simple fix, but I can't find a single thing in the settings that I haven't played with to try and get it to work.

I have an Alpine HU with an Alpine KCE-400BT bluetooth add on. My streaming audio is working, although I don't get any song/artist info on screen. I do have an issue where the phone doesn't sync up all the time. It syncs up great in the morning. If I stop for gas or something (turn off the car briefly) and get back in, then the radio won't see the phone until a call comes in or is started from the phone (or I toggle BT on/off).
You might check with Pioneer on any firmware udpates.

My incredible works great with my Ford sync system. It always connects, calls are loud and crisp, and streaming bt audio works great. I use it to listen to Pandora all the time.
-------------------------------------
Sent via the XDA Tapatalk App

seanmcd72 said:
I have an Alpine HU with an Alpine KCE-400BT bluetooth add on. My streaming audio is working, although I don't get any song/artist info on screen. I do have an issue where the phone doesn't sync up all the time. It syncs up great in the morning. If I stop for gas or something (turn off the car briefly) and get back in, then the radio won't see the phone until a call comes in or is started from the phone (or I toggle BT on/off).
You might check with Pioneer on any firmware udpates.
Click to expand...
Click to collapse
I have seen other people post issues with having bluetooth on the phone enabled before the car is on. If you turn the car on first and then the phone's bluetooth they said it worked fine.

I have Kenwood HU and my phone won't pair with it. my Blackberry Paired with it fine, and even did A2DP, and worked awesome...now......nothing.
Been looking for some answers as to why, but after calling Kenwood they said it's a software update that is missing.
however, seeing as some people are getting it working fine....I am suspecious.

Kenwood 4160 working, actually better
My 4160 and serveral WM units worked, but the A2DP always had to be turned on by going into the menu every single time I wanted to listen to anything from the phone, but the Incredible does it by itself every time perfectly.

I have a Pioneer AVIC N4 and the audio for both calls and music works just fine out of the box.

I have the kiv-bt900 also, and it is my understanding that it does not have A2DP. I believe the A2Dp in the manual is referring to the KIV-700 with the add on bt module.
From page 67 (of the downloaded manual from Kenwood)
KIV-BT900
Supported Bluetooth Profiles:
Version: Bluetooth Standard Ver. 2.0
Profile: HFP (Hands Free Profile)
OPP: (Object Push Profile)
PCAP (Phone Book Access Profile
SYNC (Synchronization Profile)
I thought it had it too when i bought it. Maybe a future update will enable it though??

What does A2DP mean please?

it stands for Advanced Audio Distribution Profile. In simple terms, it's stereo audio transferred from one device to another via bluetooth. Example: Music from a phone/mp3 player to stereo bluetooth headphones, head units etc..

Thank you.

Boozie2 said:
I have the kiv-bt900 also, and it is my understanding that it does not have A2DP. I believe the A2Dp in the manual is referring to the KIV-700 with the add on bt module.
From page 67 (of the downloaded manual from Kenwood)
KIV-BT900
Supported Bluetooth Profiles:
Version: Bluetooth Standard Ver. 2.0
Profile: HFP (Hands Free Profile)
OPP: (Object Push Profile)
PCAP (Phone Book Access Profile
SYNC (Synchronization Profile)
I thought it had it too when i bought it. Maybe a future update will enable it though??
Click to expand...
Click to collapse
Well damn. The deck was sold to me from car toys (local vendor) under the pretense that it would do zune (works great) and A2DP...
Usb works great too... I was thinking of formatting a laptop drive to the mac file system (hfs) and hooking it up to the usb port to get a200GB drive of mp3 and video since it supports ipods. (works on xbx360, why not here?)

OK so a small fix, but not the end result.
with my Kenwood head unit I can make it work as long as I don't let it download the phonebook. and that is no problem since the phone sits on my dash in the car dock. but the problem is that EVERY time I start up my truck, or after I end a call it asks to re-download the phonebook.
it kinda irks me, but I cannot get it to stop asking, no setitngs on the stereo work.

I emailed Kenwood about possibly releasing a firmware update to include A2DP to the kiv bt900. They responder saying that there isn't enough demand for the feature for them to create a firmware update. So if we get enough people contacting them and requesting that feature, they will release and update. So you guys should all contact them to increase the demand for this feature. Hope this helps.
Here is exactly what they responded:
"I understand that you're inquiring about the KIV-BT900's Bluetooth features. We do apologize for any difficulties that you've experienced with this item. Unfortunatley, we cannot assist you with any firmware updates at this point since this model was just recently released to the market. Our company has not received enough demand for this feature which prevents us from developing or releasing an update for the KIV-BT900 unit. We may release an Bluetooth update in the future, however it's hard to determine at this time."

I'm willing to start complaining and sending some emails out to them. What email address did you send it too? I just got the player and that is def the only thing missing to make it complete for me.

I tried emailing the regular support channels and got the below message.
Thank you for contacting Kenwood USA Corporation. We value you as a Kenwood customer and appreciate the opportunity to be of assistance.
I Understand you are inquiring about any updates to allow the A2DP profile.
There is currently no available updates and there hasn't been information on upcoming updates for the A2DP profile. We ask that you check back at a later date to verify if one is posted through the www.kenwoodusa.com website.
We apologize for any inconvenience.
Please feel free to contact us again with any additional questions.

I spoke with a rep and they mentioned that A2DP missing from the unit is the most often called in issue about the unit.
I have a KDC-BT948 with the same issue. They removed A2DP and put in Pandora instead..and it only works through iPhone, which then uses up wireless data on a cell phone plan. So Android, MS phones, and any other bluetooth device can no longer be used with a Kenwood Car Stereo. Someone at Pandora really made an impression at someone in Kenwood. It is too bad that they are limiting consumers with their choice which ultimately limits their sales and increases complaints.
Should have everyone go do this and request a fix.
Go to the Kenwood Contact page and send an email
This is what I sent
I have purchased the KDC-BT948HD radio.
Where I am overall happy with many of the features, looks, variable colors, and excellent sound quality of the unit, there are several things that I am extremely dissapointed in and would like to see an update released to resolve them.
1. SMS Received message on the unit: Might be useful to some, but to me it is a dangerous distraction while driving, especially at night. It has me take my eyes off the road to look at the unit and makes me want to look at my phone to read/send texts. Texting and driving is illegal in many states and there should be a way on the unit to allow a selection to turn this feature off.
2. BT Audio (A2DP) is missing. I have an Android phone with my music on it. Alone there are more Android phones than iPhones in use today. I wanted to have Bluetooth streaming audio so I can play my music from my phone to the unit. For such a high technology unit, it should be part of the firmware and flexibility to the consumer to use their device with more options. The previous year units had this enabled and seems to be disabled now replaced by a focus on a wired Apple connection and Pandora. Forcing use of Pandora also forces consumers to use up data rates on their wireless plans. If A2DP were enabled, more consumers could enjoy the product integration with standard BT devices offered by Apple, Android, Microsoft and many others. All could enjoy the music and audio applications on their devices including Pandora. I would like to request that A2DP be added to the firmware and source selection on this device. I should yield increase product ratings and sales as web searches show many complaints about this issue.
I would value your feedback on these points and potential solutions.
Best regards

drtretj said:
My incredible works great with my Ford sync system. It always connects, calls are loud and crisp, and streaming bt audio works great. I use it to listen to Pandora all the time.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Plus 1 for Sync
Sent from my HTC Droid Incredible using XDA App

[Q]A2DP on CM 10.

I'm curious as to how to set up bluetooth audio. My car supports it (Jetta TDI 2010). When I connect with bluetooth I can't seem to figure out how to use it. This is my first android phone and I've never used bluetooth audio before.
Just looking to be pointed in the right direction. Google hasn't been too helpful.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

No one?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I believe cm10 has ad2p, I know AOKP does.

Must be the diesel, lol.
Sent from my SAMSUNG-SGH-I747 using xda premium

patmann03 said:
I'm curious as to how to set up bluetooth audio. My car supports it (Jetta TDI 2010). When I connect with bluetooth I can't seem to figure out how to use it. This is my first android phone and I've never used bluetooth audio before.
Just looking to be pointed in the right direction. Google hasn't been too helpful.
Click to expand...
Click to collapse
I'm not sure I understand what your problem is?
You can't figure out how to use bluetooth in what way, exactly?

CZ Eddie said:
I'm not sure I understand what your problem is?
You can't figure out how to use bluetooth in what way, exactly?
Click to expand...
Click to collapse
When my phone is connected to my car via bluetooth, I cannot get the phone to stream audio, nor can I get the car to recognize that the phone has A2DP capabilities (I know my car works, I have the bluetooh audio connection and my friend used it with his droid)
I'm just not sure if I'm missing some small important piece to get the audio streaming.

patmann03 said:
When my phone is connected to my car via bluetooth, I cannot get the phone to stream audio, nor can I get the car to recognize that the phone has A2DP capabilities (I know my car works, I have the bluetooh audio connection and my friend used it with his droid)
I'm just not sure if I'm missing some small important piece to get the audio streaming.
Click to expand...
Click to collapse
So the phone call bluetooth works but not the music bluetooth?
Go into the bluetooth settings for your phone. And make sure both checkmarks are checked, one for phone and one for audio. You'll do this by editing the bluetooth connection to your car.

[Q] Bluetooth Auto-Connect?

Quick question whether there is an app, mod, or even build.prop edit that would allow my Note II to automatically try to connect to my car's single din Kenwood KDC‑BT952HD. Only thing the head unit tries to do when connected is re-download contacts, but it turns on as soon as my car turns on and it'd be a lot faster if my Note automatically attempted to connect to the head unit instead of the bluetooth popup with listed devices, which I don't even have considering I'm running Whompasaurus V2.9. so if there's any way I could even get the pop up that'd be great too!

I use Tasker to turn on Bluetooth and connect to my earpiece. But I need a trigger and I need to turn on my earpiece. The trigger I use is activating my map app.
So without a trigger, I don't know how to do that.

I'm new to tasker and I'm not sure how to enable the auto-connect through tasker.

I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player

maybe I'm missing something here, so may suggestion by be complete off.
Maybe leaving BT tunred on your GN2 before you get in your car. Or turned it on before you get in the car. I'm assuming the ROM you're using has a BT toggle. The thinking is that your headunit will try to automatically connect to any paired BT devices. If so, the GN2 should automatically connect when the deck does it's search.
This works for me when I try connecting to Jawborn Big Jambox or Jawbone Era or other BT devices I have paired on my GN2. It may be worth nothing I'm on a deoxidized stock rom. But I this also worked when I ran AOSP roms on my Evo 4G such as CM.
If the headunit does not do a pair device search and connect when it turns on, then I would definitely try suggest above. I have no clue, and that's better than nothing.

no autoconnect on GN2
Once you had a BT connection with your car and leave it at the gas station e.g. it won't reconnect when you're back!
Sad, but since then I tried the mighty Tasker and similar apps, but was happy with the app called "Bluetooth Auto Connect".
You can define the simple trigger, when display on....
So whenever I get back into the car, I hit either the menu or start button, that's it. Without unlocking you are back connected.
The only other annoying thing that you might be able to fix with Tasker is, that right after the A2DP establishes the connection the player starts playing the last song, which I obviously don't want most of the time.
Also Play Pause Next etc over BT doesn't work too well on android.

I have a Alpine head unit and as long as my bt is on before I start the car everything syncs automatically.
Sent from my SPH-L900 using Tapatalk 2

Lord Sekhmet said:
I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player
Click to expand...
Click to collapse
That's interesting, I always wonder what exactly secure settings does, but this example helps.
Sent from my SPH-L900 using xda premium

1FstYOTA said:
I have a Alpine head unit and as long as my bt is on before I start the car everything syncs automatically.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I have a Kenwood Dnx6980, and my experience has been that once my phone has been setup to sync ... The Kenwood will talk to it automagically.
This is using AOSP or non stock roms. Ofc.
Sent from my SPH-L900 using Tapatalk 2

Tasker worked for me
Skripka said:
I have a Kenwood Dnx6980, and my experience has been that once my phone has been setup to sync ... The Kenwood will talk to it automagically.
This is using AOSP or non stock roms. Ofc.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Guys I have a Chinese brand double din...MobileVision...or something like that and using Tasker along with Bluetooth autoconnect worked for me. The posts above describe exactly how to set it up and it worked for me.

[email protected] said:
Guys I have a Chinese brand double din...MobileVision...or something like that and using Tasker along with Bluetooth autoconnect worked for me. The posts above describe exactly how to set it up and it worked for me.
Click to expand...
Click to collapse
Bluetooth autoconnect's main feature works for my xperia pro (turn on bluetooth, connect to your selected devices in automatic)
Bluetooth autoconnect's tasker plugin is not working for me. I can use it, sort off, but it does nothing. Like, "Press the button, but there was no reply!"

Well that is odd. I have a Pioneer unit and my phone connects to it as soon as it detects it in range. Even if I turn off BT and then power it on, the phone automatically connects to the head unit without any intervention on my part. Sounds like an issue with your stereo.

No stereo issue. On some of the touch wiz based roms bluetooth DOES NOT auto connect. On most (if not all) aosp roms bluetooth DOES auto connect. Currently on ma7 stock with root and it auto connects. When I was on whomp, jellybombed, and labrats
Sent from my SPH-L900 using Tapatalk 4 Beta

Bluetooth Connection
Hi Guys,
Im glad i found this thread, im wondering if anyone could help me out.
My scenario is, my bluetooth is connected to my car radio playing files. When a call comes in, i need it to disconnect from the car radio and connect to my bluetooth headset, all without turning off bluetooth ( preferable )
My possible solutions are:
1 ) By using automagic, ive managed to get alot done with this app, but this seems beyond it.
2 ) Getting automagic to start an application when a call comes in which will force bluetooth connection to a specific bluetooth device and disconnected from other devices.
Anyone got any suggestions?

devilshady said:
Hi Guys,
Im glad i found this thread, im wondering if anyone could help me out.
My scenario is, my bluetooth is connected to my car radio playing files. When a call comes in, i need it to disconnect from the car radio and connect to my bluetooth headset, all without turning off bluetooth ( preferable )
My possible solutions are:
1 ) By using automagic, ive managed to get alot done with this app, but this seems beyond it.
2 ) Getting automagic to start an application when a call comes in which will force bluetooth connection to a specific bluetooth device and disconnected from other devices.
Anyone got any suggestions?
Click to expand...
Click to collapse
not sure of your rom, but both TW and CM allow you to set whether each connection is Media or Phone. put your headset to phone and your car to media only. when you answer the phone the headset should take over.

Lord Sekhmet said:
I use Tasker to turn on Bluetooth and connect to my earpiece. But I need a trigger and I need to turn on my earpiece. The trigger I use is activating my map app.
So without a trigger, I don't know how to do that.
Click to expand...
Click to collapse
Could you share how you did this? I am completely confused by the interface.
I am wanting the same setup but also for music player and Pandora
I haven't found an example to follow that even comes close.
---------- Post added at 09:54 AM ---------- Previous post was at 09:43 AM ----------
Lord Sekhmet said:
I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player
Click to expand...
Click to collapse
That helps,
I was going task / setting / Bluetooth
Still not sure how to set the trigger however.
[EDIT]
The first few minutes of that video answered my questions.
Sorry, I partied late last night and still kinda loopy.
Sent from my Jedi MasterX Note 2

[Q] Bluetooth issues in a vehicle

Hi everyone,
Got my black Z1c yesterday, love it so far!
However, when I try to use it in my car (Audi A6 2008), I cannot place a call if it was initiated from the car's interface.
The phone connects to BT no probs and shows my car in the devices list as a headset. Incoming calls are reflected on the car's display, and connected to the speaker's/mic of the car. When I place a call from the phone itself - same deal, all works as expected. But when I use the car's controls to dial a number, the car's display shows "connecting", and nothing happens...
Tried to pair/unpair many times, no success. Tried other phones, like iPhone 5, Samsung Ativ S (WP8), Samsung Galaxy S4 Active, HTC One - all work seamlessly. My old Xperia Z was working fine, until I sold it to get the Z1c... I would never expect Z1c to behave like this...
Anyone has similar issues?

Yes mine is the same (ford sync)
Sent from my D5503 using XDA Premium 4 mobile app

Hoagi said:
Bluetooth is a wireless protocol for exchanging data over short distances from fixed and mobile devices, creating personal area networks.
There are two important parameters of Bluetooth devices - class and supported profiles.
"Class" signifies the distance at which a Bluetooth connection is possible. Most mobile devices are Class 2, which means they have a range of up to 10 m. Class 1 devices are rare and have a range of up to 100 feet.
A "profile" is a type of Bluetooth connection. The most common are the Headset (HSP) and Handsfree (HFP) profiles that enable the device to connect to a wireless headset or handsfree.
Some other profiles are OBEX (OBject EXchange) which allows transfer of files, contacts and events; A2DP, which adds support for streaming of stereo sound and AVRC, which allows remote control of playback.
Click to expand...
Click to collapse
... and the reason you have posted this is...?

Aung Thiha said:
try clear caches. All kinds of caches. When I say all kinds, I mean all caches that you can clean. Retry what you want to do. If it does not help, try factory reset and retry your bluetooth connection. if it still does not help, try flash firmware. I guess this is the solution you can count on.
Click to expand...
Click to collapse
Thanks, will try. The phone was just outta box when I was trying it in my car... The car was the first BT device it has ever been paired wtih...

Phone calls work fine on mine.
BUT while we're on the topic of vehicle BT, has anyone got working song info via bluetooth? I thought it was supposed to support avrcp 1.3, but in my car (2013 Ford SYNC) I still get no info about songs I'm listening to and also the voice commands for playing artists or albums don't work.
/Daniel

I use it with my new Golf and the phone functions works as expected but the song info does not show. But they never do with Android phones. My 5s works of course
Sent from my iPhone 5s using Tapatalk

easycure1974 said:
I use it with my new Golf and the phone functions works as expected but the song info does not show. But they never do with Android phones. My 5s works of course
Click to expand...
Click to collapse
In my Toyota Auris 2013 model song info always worked with Walkman app assuming you have tags filled out correctly.
I know there were some issues with tag info in Poweramp I prefer to use but they got that fixed recently. Advanced options to display song info on external BT device is just buried deep in app's settings though.

Everything works fantastic on my BMW F10 (2012) with Navigation Professional, Bluetooth Music with Song Info, Phone with contact pictures (! Didn't even know that was possible until I got the Z10c) and full Message Access Profile with historic E-Mail and SMS access.
The In-Car integration is the main reason why I am torn between iPhone 5s and Xperia Z1c.
The iPhone has the Advantage of "BMW Apps", which allow using Webradio, Facebook, RSS Feeds etc. through the Navigation, as well as iPod Control and Coverart Display.
The Z10 can't do those things, but it can do Bluetooth MAP which is rather important to me also. Webradio can of course be streamed via BT (and controlled on the phone).

Anyway to force bluetooth metadata to send to my car?

I have a brand new 2015 Hyundai Sonata, and my girlfriends Galaxy S5 can send metadata and track info to my stereo no problem (using google play music). My new Galaxy Note 4. refuses to send the track info... I've tried using the AutoAudio app which will allegedly fix the problem, but that didn't help. I also tried using Poweramp and the stock music player as well, hoping that something would work, and nothing does. However, my dash unit and steering wheel can CONTROL the phone, just not display what it's doing.. So it appear AVRCP is working but not bluetooth metadata.
It's such a minor thing, but it's driving me nuts. Any ideas?

Bump -- I also noticed the sound quality over bluetooth (for the same files) is way worse with my Note 4.

I get the same problem on my 2012 Mazda 3. My understanding is it's a problem with Bluetooth 4.1 compatibility. It makes no sense as it is supposed to be backwards compatible, but it's pretty regularly reported that many car stereos aren't fully compatible with the latest Bluetooth spec and this is the result. Bothers me too. If anyone is able to get it working, please share. I'm certainly interested in a solution.
Sent from my SM-N910V using XDA Premium HD app

cgalyon said:
I get the same problem on my 2012 Mazda 3. My understanding is it's a problem with Bluetooth 4.1 compatibility. It makes no sense as it is supposed to be backwards compatible, but it's pretty regularly reported that many car stereos aren't fully compatible with the latest Bluetooth spec and this is the result. Bothers me too. If anyone is able to get it working, please share. I'm certainly interested in a solution.
Sent from my SM-N910V using XDA Premium HD app
Click to expand...
Click to collapse
So Hyundai themselves actually called me and said that my headunit is running some really old Bluetooth stack... So old that the new version of bluetooth isn't that far backwards compatible.. It will play audio, but at a lower quality and without metadata.. They said the headunit software manufacturer (MNSoft) might have a firmware update, but they generally only do those for nav systems.

bandit614 said:
So Hyundai themselves actually called me and said that my headunit is running some really old Bluetooth stack... So old that the new version of bluetooth isn't that far backwards compatible.. It will play audio, but at a lower quality and without metadata.. They said the headunit software manufacturer (MNSoft) might have a firmware update, but they generally only do those for nav systems.
Click to expand...
Click to collapse
I googled MNSoft and what showed up for me was the mapping software that Hyundai uses. Would that really have to do with Bluetooth and metadata? I have a 2013 elantra with nav. I get no metadata on my screen either. Sound quality is great though since mine does come with the upgraded sound system.
Sent from my Nexus 9 using XDA Free mobile app

2011 mazdaspeed with nav here. Same results. Haven't called for update

Last I heard from Mazda, they can't (or won't) update the software. They consider it done. I find that aggravating as cars should last longer than phones and the radio isn't easy to change out
Sent from my SM-N910V using XDA Premium HD app