Just had the new kenwood deck installed... Should do almost anything. I have my incredible paired up and calls are clear. Problem is A2DP audio streaming. Does not work. No A2DP device is found. Yes, the manual gives directions to play streamed audio once bt is synced. Well, its synced, got my phone book on there, and calls are being made.
Any thoughts or ideas to get streaming audio?
I don't have any help to offer, but I am experiencing the same problem with my Pioneer FH-P8000BT. Pairs for phone calls with no issue and everything is clear, but the radio does not even "see" the device as being available for A2DP.
I previously paired a few different HTC phones (all running Windows Mobile) with this radio with no issues. I'm hoping it's a simple fix, but I can't find a single thing in the settings that I haven't played with to try and get it to work.
I have an Alpine HU with an Alpine KCE-400BT bluetooth add on. My streaming audio is working, although I don't get any song/artist info on screen. I do have an issue where the phone doesn't sync up all the time. It syncs up great in the morning. If I stop for gas or something (turn off the car briefly) and get back in, then the radio won't see the phone until a call comes in or is started from the phone (or I toggle BT on/off).
You might check with Pioneer on any firmware udpates.
My incredible works great with my Ford sync system. It always connects, calls are loud and crisp, and streaming bt audio works great. I use it to listen to Pandora all the time.
-------------------------------------
Sent via the XDA Tapatalk App
seanmcd72 said:
I have an Alpine HU with an Alpine KCE-400BT bluetooth add on. My streaming audio is working, although I don't get any song/artist info on screen. I do have an issue where the phone doesn't sync up all the time. It syncs up great in the morning. If I stop for gas or something (turn off the car briefly) and get back in, then the radio won't see the phone until a call comes in or is started from the phone (or I toggle BT on/off).
You might check with Pioneer on any firmware udpates.
Click to expand...
Click to collapse
I have seen other people post issues with having bluetooth on the phone enabled before the car is on. If you turn the car on first and then the phone's bluetooth they said it worked fine.
I have Kenwood HU and my phone won't pair with it. my Blackberry Paired with it fine, and even did A2DP, and worked awesome...now......nothing.
Been looking for some answers as to why, but after calling Kenwood they said it's a software update that is missing.
however, seeing as some people are getting it working fine....I am suspecious.
Kenwood 4160 working, actually better
My 4160 and serveral WM units worked, but the A2DP always had to be turned on by going into the menu every single time I wanted to listen to anything from the phone, but the Incredible does it by itself every time perfectly.
I have a Pioneer AVIC N4 and the audio for both calls and music works just fine out of the box.
I have the kiv-bt900 also, and it is my understanding that it does not have A2DP. I believe the A2Dp in the manual is referring to the KIV-700 with the add on bt module.
From page 67 (of the downloaded manual from Kenwood)
KIV-BT900
Supported Bluetooth Profiles:
Version: Bluetooth Standard Ver. 2.0
Profile: HFP (Hands Free Profile)
OPP: (Object Push Profile)
PCAP (Phone Book Access Profile
SYNC (Synchronization Profile)
I thought it had it too when i bought it. Maybe a future update will enable it though??
What does A2DP mean please?
it stands for Advanced Audio Distribution Profile. In simple terms, it's stereo audio transferred from one device to another via bluetooth. Example: Music from a phone/mp3 player to stereo bluetooth headphones, head units etc..
Thank you.
Boozie2 said:
I have the kiv-bt900 also, and it is my understanding that it does not have A2DP. I believe the A2Dp in the manual is referring to the KIV-700 with the add on bt module.
From page 67 (of the downloaded manual from Kenwood)
KIV-BT900
Supported Bluetooth Profiles:
Version: Bluetooth Standard Ver. 2.0
Profile: HFP (Hands Free Profile)
OPP: (Object Push Profile)
PCAP (Phone Book Access Profile
SYNC (Synchronization Profile)
I thought it had it too when i bought it. Maybe a future update will enable it though??
Click to expand...
Click to collapse
Well damn. The deck was sold to me from car toys (local vendor) under the pretense that it would do zune (works great) and A2DP...
Usb works great too... I was thinking of formatting a laptop drive to the mac file system (hfs) and hooking it up to the usb port to get a200GB drive of mp3 and video since it supports ipods. (works on xbx360, why not here?)
OK so a small fix, but not the end result.
with my Kenwood head unit I can make it work as long as I don't let it download the phonebook. and that is no problem since the phone sits on my dash in the car dock. but the problem is that EVERY time I start up my truck, or after I end a call it asks to re-download the phonebook.
it kinda irks me, but I cannot get it to stop asking, no setitngs on the stereo work.
I emailed Kenwood about possibly releasing a firmware update to include A2DP to the kiv bt900. They responder saying that there isn't enough demand for the feature for them to create a firmware update. So if we get enough people contacting them and requesting that feature, they will release and update. So you guys should all contact them to increase the demand for this feature. Hope this helps.
Here is exactly what they responded:
"I understand that you're inquiring about the KIV-BT900's Bluetooth features. We do apologize for any difficulties that you've experienced with this item. Unfortunatley, we cannot assist you with any firmware updates at this point since this model was just recently released to the market. Our company has not received enough demand for this feature which prevents us from developing or releasing an update for the KIV-BT900 unit. We may release an Bluetooth update in the future, however it's hard to determine at this time."
I'm willing to start complaining and sending some emails out to them. What email address did you send it too? I just got the player and that is def the only thing missing to make it complete for me.
I tried emailing the regular support channels and got the below message.
Thank you for contacting Kenwood USA Corporation. We value you as a Kenwood customer and appreciate the opportunity to be of assistance.
I Understand you are inquiring about any updates to allow the A2DP profile.
There is currently no available updates and there hasn't been information on upcoming updates for the A2DP profile. We ask that you check back at a later date to verify if one is posted through the www.kenwoodusa.com website.
We apologize for any inconvenience.
Please feel free to contact us again with any additional questions.
I spoke with a rep and they mentioned that A2DP missing from the unit is the most often called in issue about the unit.
I have a KDC-BT948 with the same issue. They removed A2DP and put in Pandora instead..and it only works through iPhone, which then uses up wireless data on a cell phone plan. So Android, MS phones, and any other bluetooth device can no longer be used with a Kenwood Car Stereo. Someone at Pandora really made an impression at someone in Kenwood. It is too bad that they are limiting consumers with their choice which ultimately limits their sales and increases complaints.
Should have everyone go do this and request a fix.
Go to the Kenwood Contact page and send an email
This is what I sent
I have purchased the KDC-BT948HD radio.
Where I am overall happy with many of the features, looks, variable colors, and excellent sound quality of the unit, there are several things that I am extremely dissapointed in and would like to see an update released to resolve them.
1. SMS Received message on the unit: Might be useful to some, but to me it is a dangerous distraction while driving, especially at night. It has me take my eyes off the road to look at the unit and makes me want to look at my phone to read/send texts. Texting and driving is illegal in many states and there should be a way on the unit to allow a selection to turn this feature off.
2. BT Audio (A2DP) is missing. I have an Android phone with my music on it. Alone there are more Android phones than iPhones in use today. I wanted to have Bluetooth streaming audio so I can play my music from my phone to the unit. For such a high technology unit, it should be part of the firmware and flexibility to the consumer to use their device with more options. The previous year units had this enabled and seems to be disabled now replaced by a focus on a wired Apple connection and Pandora. Forcing use of Pandora also forces consumers to use up data rates on their wireless plans. If A2DP were enabled, more consumers could enjoy the product integration with standard BT devices offered by Apple, Android, Microsoft and many others. All could enjoy the music and audio applications on their devices including Pandora. I would like to request that A2DP be added to the firmware and source selection on this device. I should yield increase product ratings and sales as web searches show many complaints about this issue.
I would value your feedback on these points and potential solutions.
Best regards
drtretj said:
My incredible works great with my Ford sync system. It always connects, calls are loud and crisp, and streaming bt audio works great. I use it to listen to Pandora all the time.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Plus 1 for Sync
Sent from my HTC Droid Incredible using XDA App
Related
I was wondering if Desire works OK with bluetooth hand-free devices. Someone who can tell us about it? I use it a lot on my car and it's a basic point for a mobile phone. I would really appreciate any feedback about this.
Thanks.
xmfreak said:
I was wondering if Desire works OK with bluetooth hand-free devices. Someone who can tell us about it? I use it a lot on my car and it's a basic point for a mobile phone. I would really appreciate any feedback about this.
Thanks.
Click to expand...
Click to collapse
It has full A2DP which means you can control the device using the stereo itself, something the iphone cannot do
Audio/Video Remote Control Profile (AVRCP) is what works properly on the Desire, the iphone does not have this support
The Desire supports the following Bluetooth Profiles
A2DP,AVRCP, GAP, GOEP, HFP, HSP, PBAP, SPP, Service Discovery Application Profile
This is a full list of all the bluetooth layers
Advanced Audio Distribution Profile (A2DP)
Audio/Video Remote Control Profile (AVRCP)
Basic Imaging Profile (BIP)
Basic Printing Profile (BPP)
Cordless Telephony Profile (CTP)
Device ID Profile (DID)
Dial-up Networking Profile (DUN)
Fax Profile (FAX)
File Transfer Profile (FTP)
General Audio/Video Distribution Profile (GAVDP)
Generic Access Profile (GAP)
Generic Object Exchange Profile (GOEP)
Human Interface Device Profile (HID)
Intercom Profile (ICP)
Object Push Profile (OPP)
Personal Area Networking Profile (PAN)
Phone Book Access Profile (PBAP)
Serial Port Profile (SPP)
Service Discovery Application Profile (SDAP)
SIM Access Profile (SAP,SIM)
Synchronisation Profile (synch)
Video Distribution Profile (vdp)
Wireless Application Protocol Bearer (WAPB)
Works well with my BT Parrot CK3300 kit.
Ive got a Pioneer 7100BT winging its way to me, that has A2DP, im hoping it will work well with my Desire. Will post results when i get it and install it tomorrow.
Seems to work ok with my Standard Motorola headset.
Hoping to be able to est it with a bluetooth stereo soon.
ronnyuk said:
It has full A2DP which means you can control the device using the stereo itself, something the iphone cannot do
Audio/Video Remote Control Profile (AVRCP) is what works properly on the Desire, the iphone does not have this support
The Desire supports the following Bluetooth Profiles
A2DP,AVRCP, GAP, GOEP, HFP, HSP, PBAP, SPP, Service Discovery Application Profile
This is a full list of all the bluetooth layers
Advanced Audio Distribution Profile (A2DP)
Audio/Video Remote Control Profile (AVRCP)
Basic Imaging Profile (BIP)
Basic Printing Profile (BPP)
Cordless Telephony Profile (CTP)
Device ID Profile (DID)
Dial-up Networking Profile (DUN)
Fax Profile (FAX)
File Transfer Profile (FTP)
General Audio/Video Distribution Profile (GAVDP)
Generic Access Profile (GAP)
Generic Object Exchange Profile (GOEP)
Human Interface Device Profile (HID)
Intercom Profile (ICP)
Object Push Profile (OPP)
Personal Area Networking Profile (PAN)
Phone Book Access Profile (PBAP)
Serial Port Profile (SPP)
Service Discovery Application Profile (SDAP)
SIM Access Profile (SAP,SIM)
Synchronisation Profile (synch)
Video Distribution Profile (vdp)
Wireless Application Protocol Bearer (WAPB)
Click to expand...
Click to collapse
Hope someone can figure this out:
I've had experience with 3 mobiles connecting to the built-in bluetooth in my car (HTC Tytn II, HTC Hero and Nokia e71) my concern is the following:
With the Nokia, when I get a call, I hear the phone ringtone through the car speakers. But with both HTCs I couldn't, I hear the default car ringtone, which is REALLY annoying.
The nokia e71 has the following bluetooth specs:
Bluetooth version 2.0 with Enhanced Data Rate
- Bluetooth profiles: DUN, OPP, FTP, HFP, GOEP, HSP, BIP, RSAP, GAVDP, AVRCP, A2DP
does anyone know if one of the these profiles is responsible for this? which one? I hope it would work with the Desire.
by the way, does making the phone visible before connecting make any difference? (just wondering)
Yet another HTC handset I can't get to work with my factory fit blue-tooth in my Skoda Superb (delete / install any VW Audi group car)
sh500 said:
Works well with my BT Parrot CK3300 kit.
Click to expand...
Click to collapse
Hi, I have the CK3200 LS-COLOR and I can't get the contacts to load on the parrot, did you have any teething troubles?
Pumpkin Lantern said:
Hi, I have the CK3200 LS-COLOR and I can't get the contacts to load on the parrot, did you have any teething troubles?
Click to expand...
Click to collapse
No problems at all. Just a standard pairing; it took less than a minute to auto sync the address book and I was ready to go.
I've never had problems with this kit; have sync'd numerous WinMo devices, Blackberrys (is that the plural?!) (still active for work) and now the Android device.
beaker656 said:
Yet another HTC handset I can't get to work with my factory fit blue-tooth in my Skoda Superb (delete / install any VW Audi group car)
Click to expand...
Click to collapse
VAG cars need phones that use the RSAP Bluetooth profile, it's a bit of a wierd profile and stands for Remote Sim Access Profile, now looking this up for you I can only see some blackberry and Nokia phones that have this profile.
Bluetooth phone prep is a bit of a waste of time at the moment as the company who writes the software are not fully integrating there systems with everyone else, they are also not following standard A2DP procedures, I would imagine this is due to a partnership thing with people like Nokia and company cars etc.
Next time save the 600 quid or so you pay to have bluetooth prep and get a decent stereo like I have in my Audi, unless you got satnav too then you are stuffed
I have enclosed a link on VAG group phone prep and HTC phones, make sure your SIM card is of the new Variety
http://audiforum.us/multimedia/11189-audi-bluetooth-rsap-adapter-htc-touch-pro.html
I've had mixed results.
In my car the Desire works perfectly with the Parrot CK3300. I get full bluetooth contact sync, voice dialling works fine (the CK3300 does the voice recognition as the Desire doesn't do it over bluetooth) and calls come through loud and clear.
The wife has the lower CK3000 Evo. This doesn't have a display, so you send contacts to the kit over bluetooth and then record voice tags against them so that the kit can do voice dialling. Unfortunately the Desire refuses to send contacts to it and claims that the kit doesn't support sending contacts over bluetooth. This unfortunately means the wife can use the kit for incoming calls, but has no voice dialling for outgoing calls when she also upgrades to the Desire on Saturday when her contract's up.
Dae.
But what about voice dialling over Bluetooth with any of those?
The Android OS doesn't support voice dialling over bluetooth yet.
That's why I use the Parrot CK3300 - it does it on behalf of the phone. It basically syncs the phonebook to the kit. You then record the voice tags into the kit and associate them with a contact. You can then voice dial, which the kit will match up to the contact and dial using the phone.
Even when I've had phones that do support voice dialling I've always found the Parrot more effective.
Dae
ronnyuk said:
VAG cars need phones that use the RSAP Bluetooth profile, it's a bit of a wierd profile and stands for Remote Sim Access Profile, now looking this up for you I can only see some blackberry and Nokia phones that have this profile.
Bluetooth phone prep is a bit of a waste of time at the moment as the company who writes the software are not fully integrating there systems with everyone else, they are also not following standard A2DP procedures, I would imagine this is due to a partnership thing with people like Nokia and company cars etc.
Next time save the 600 quid or so you pay to have bluetooth prep and get a decent stereo like I have in my Audi, unless you got satnav too then you are stuffed
I have enclosed a link on VAG group phone prep and HTC phones, make sure your SIM card is of the new Variety
http://audiforum.us/multimedia/11189-audi-bluetooth-rsap-adapter-htc-touch-pro.html
Click to expand...
Click to collapse
Thanks for the explanation. I happen to own a VAG car, A4 B8 with concert radio.
So SAP profile is different than RSAP profile? Could this be responsible for the phone ringtone not going through the car speakers? Because everything else works perfectly, it pairs and connects automatically, syncs contacts and make/receive calls, except for the ringtone issue! Which sounds like an ambulance siren.
What stereo system did you install?
daesimps said:
I've had mixed results.
In my car the Desire works perfectly with the Parrot CK3300. I get full bluetooth contact sync, voice dialling works fine (the CK3300 does the voice recognition as the Desire doesn't do it over bluetooth) and calls come through loud and clear.
The wife has the lower CK3000 Evo. This doesn't have a display, so you send contacts to the kit over bluetooth and then record voice tags against them so that the kit can do voice dialling. Unfortunately the Desire refuses to send contacts to it and claims that the kit doesn't support sending contacts over bluetooth. This unfortunately means the wife can use the kit for incoming calls, but has no voice dialling for outgoing calls when she also upgrades to the Desire on Saturday when her contract's up.
Dae.
Click to expand...
Click to collapse
That's not good to read at all if I remember correctly I think I have on my car the same parrot model as your wife. My parrot is working perfect with Omnia and Xperia but I was afraid it wouldn't work with Desire and it seems I was right to be afraid. That's a huge problem for me.
Works perfectly with my Motorola H500 Bluetooth Headset.
xmfreak said:
That's not good to read at all if I remember correctly I think I have on my car the same parrot model as your wife. My parrot is working perfect with Omnia and Xperia but I was afraid it wouldn't work with Desire and it seems I was right to be afraid. That's a huge problem for me.
Click to expand...
Click to collapse
It's a big deal for her too. I'm hoping that it'll be fixed in a future update. I'm glad we thought to check it before she upgraded to the Desire. She's going to hold off upgrading until this issue is resolved as she spends a lot of time in the car and it's not cheap to upgrade the handsfree kit. It's a deal breaker for her.
salahag said:
Thanks for the explanation. I happen to own a VAG car, A4 B8 with concert radio.
So SAP profile is different than RSAP profile? Could this be responsible for the phone ringtone not going through the car speakers? Because everything else works perfectly, it pairs and connects automatically, syncs contacts and make/receive calls, except for the ringtone issue! Which sounds like an ambulance siren.
What stereo system did you install?
Click to expand...
Click to collapse
I installed a Blaupunkt MP68 but would not recommend it as it's pretty old now, the good thing was in the day it matched the Audi Red dials perfect and was German so I stuck with it.
All the Pioneer new series of BT headunits have Parrot BT built in so I would recommend one of those.
hmmm ... where does one go to get at slightly more advanced settings for BT? The Settings>Wireless & Networks options are very basic. I'm hoping to be able to tweak something to make it start working with my Audi A5. I suppose I'm asking is there anything like Sim Access Profile or Jetware out there?
Anyone any ideas? I searched Marketplace but nothing relevant came up.
I have found that my motorola headset keeps connecting and disconnecting like it is going out of range.
Thing is, it can be in my pocket about a foot from my headset and still disconnect and reconnect several times a minute.
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
e-thug said:
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
Click to expand...
Click to collapse
Hmmmm .... I don't believe you ever stated what type of headset you are trying to get working here? I find your problem to be very strange, even though WinMo does seem to be lacking in a lot of different areas, audio streaming via bluetooth stereo headset is definitely not a problem I have encountered. It even streams flawlessly through my 5.1 hooked to my pc via a crappy 8 buck bt dongle and still sounds excellent. Have you considered that the problem may lie with your bt headset itself?
Also, when you say that you installed latest "release" from AT&T (from a thread on this site), what exactly do you mean? I am running the "unofficial" leaked rom from AT&T on mine and I just paired my Motorola S9 stereo headset and it is playing great for me. You also may want to try using some different software, give S2P (Slide 2 Play) a try and see if you have different results. That's what I am using right now, but I have used TCPMP to play a few xVids through my headset and have had no problems.
The problem is not in the head unit. 25 other phones can't all be wrong. I have no problem using my bluetooth headset. That is probably why you don't see the problem. Anything more complex than a headset will not work with this release. The problem lies within the phone as soon as it displays a notification (which, of course I cannot disable) which reads, "The connected Bluetooth headset does not support volume adjustment from the device. Adjust volume on the headset itself."
That message is the kiss of death. So basically any Bluetooth head unit will not work with this phone? Sounds like shoddy programming to me. Yes, I am using the "leaked" release. I really don't think this release will ever see the light of day. Its horrible! You cannot disable notifications (I don't need to know when my text messages were sent successfully), and it looks like whenever I get a system notification, any program I am using crashes immediately. Like I said before, as soon as I get a notification, I lose the Bluetooth connection (which is like a split second before the notification comes up). I highly doubt this "leaked" copy will ever see the light of day, officially (unless AT&T and HTC do absolutely zero testing on it).
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
My Tilt 2 works absolutely fine with all my BT devices, including 2 Motorola headphone sets and my Sony Xplod head unit in my truck.
e-thug said:
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
Click to expand...
Click to collapse
I was mis-understanding you about the head unit, I did think you were talking about a headset. Sorry bout that, my Mustang doesn't have built-in BT so I have to use a Motorokr t505 for those chores. It works well but it does give me the same message that you are getting about "volume can't be cotrolled etc" but I can dismiss it and carry on without any problems.
but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
Click to expand...
Click to collapse
Since you don't need your phone for calls, just get Sirius or XM. Ya know, considering you only stream music through the phone..
Did you try the BT headset or head unit with the original stock ROM before you flashed the "leaked official" ROM?
Seems like you might have a couple random issues, with the BT issues and the system notifications crashing programs. I haven't flashed the leaked ROM, but I do know that many random issues with cooked ROMs can often be cleared up by running Task29, which completely wipes the phone memory before you flash a new ROM. I think you will need to HardSPL before you run Task29. Might be worth a try, sometimes fragments of the old ROM interfere with the new one, and cause some bugs.
Bluetooth protocols can be implemented differently by different manufacturers.
I know of many people including myself who have NO PROBLEM with the tilt 2 and different Bluetooth products INCLUDING car radios.
I am using the "new" AT&T ROM and have no difficulties.
Clearly your pissed but your subject is wrong. I would suggest changing to "Worthless as $HIT to ME"
I think my problem is that I am getting notifications which seem to be killing my connection. Is there a way to turn all notifications OFF? The only ones I care about are missed calls, incoming SMS and maybe a birthday. I would like to try to kill the notifications first because I think this may solve my problem
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/06/24/enable-or-disable-the-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/06/24/tweak-and-configure-how-notifications-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
redpoint73 said:
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/...he-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/...cations-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
Click to expand...
Click to collapse
Thanks I will try these out and report back
For the record my head unit is a JVC KD-BT11 and I have never had any kind of problem pairing any other phone
Somebody else just posted a very similar issue, and found the app hAndyUtils to be helpful:
http://forum.xda-developers.com/showthread.php?t=741311
I think hAndyUtils might just be a app-based way to make the reg edits I posted earlier. But give it a try.
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack. (Just as an aside, on all my past phones, there were people bemoaning the the fact that it had MS, and trying to replace it with the Widcomm, so I am getting a real chuckle out of folks complaining about the Widcomm and wishing for MS )
In any case, the utilities (Blue music toggle etc...) that used to work for me to toggle between streaming in stereo and plain phone qulity no longer work. However, all my stereo headsets (I own three different brands/pairs) all work perfectly with the Tilt 2. And stay connected and streaming all day.
By the way, coming on a forum that is full of people helping each other and using profanity, anger and threats, is not the most conducive way to get your questions answered. The odds are that the problem you are having is already solved somewhere among the 6+ million posts in this forum. I do not know where or I would post it for you, but it is probably out there. Good luck. And if you find it, please post the link to the answer back here so that other serchers will find it too.
maybe it can come from the phone itself
i had a rhodium for almost a year and never got my motorola headset ht820 to work well enough for me to use it... (more skips than music...cant move my head without a skip)
i flashed to a NRG rom before trying my headset...i tried eveything as far as ref setting, different radios...even flashed my ht820...
no improvement...
then my phone fell in water not so long ago...got another rhodium same model (european)...and it worked perfect out the box on stock rom i can go in a different room than my device and still hear music with no skips...and it still does with nrg rom and latest radio...
so my guess is maybe some actual devices have bad bluetooth hardware ???
I have the Motorola S9 and the HT820 and both work absolutely fine on my Tilt 2.
yatrg said:
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack.
Click to expand...
Click to collapse
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
e-thug said:
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
Click to expand...
Click to collapse
Did you ever try the solution in this thread? It fixed a lot of issues people were having with bluetooth car kits. Maybe it will work for you: http://forum.xda-developers.com/showthread.php?t=591322
The solution source is here: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html
And here is the solution. You need a registry editor to do this:
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change (or add if not there) DisableReopenAudio to 0 (default is 1)
3. Reboot device
You may also want to do the A2DP quality registry edit: Add a DWORD value of LineSpeed to HKLM\Software\WIDCOMM\Plugin\AV\ with a value of 320.
Give it a try, it may work for you.
I will give this a try and report back. Thank you very much for the response!
No luck. And my bdaddr keeps resetting to a binary value when I reset the phone
Just wondering what bluetooth services people are seeing on there WP7 phones.
I have a HD7 on T-Mobile USA and it's only advertising the following to my Windows 7 computer:
A2DP
Headset Audio Gateway
Remotely Controllable Device
Thanks
a2dp as a service for the phone? not sure, but my friend bought the hd7 on my recommendation and he can't get audio for video files through a2dp and its killing him
hopefully wp7 has some cool tricks up its sleeve based on what you got there
I'm interested in four bluetooth profiles, if and how they are compatible and work.
- A2DP
- AVRCP
- Handsfree
- Bluetooth HID for Keyboard
any news mostly about the BT HID Keyboard?
I found this on Microsoft Support site:
Windows Phone 7 supports the following Bluetooth user profiles:
Advanced Audio Distribution Profile (A2DP 1.2)
Audio/Video Remote Control Profile (AVRCP 1.0)
Hands Free Profile (HFP 1.5)
Headset Profile (HSP 1.1)
Phone Book Access Profile (PBAP 1.0)
http://support.microsoft.com/kb/2449475
This is the first device I have seen that supports SMS over bluetooth. If you have a Ford product with SYNC, you can use SMS over bluetooth. It also works with my Kenwood head unit. Basically, you can see incoming messages and, in the case of SYNC, send canned replies from the head unit. On my Kenwood, there is actually an on-screen keyboard to send any message you like. Cool stuff really!
bravo261 said:
a2dp as a service for the phone? not sure, but my friend bought the hd7 on my recommendation and he can't get audio for video files through a2dp and its killing him
Click to expand...
Click to collapse
same problem with my htc trophy. audio for video files only plays through the loud speaker and not through the bluetooth headset. I tried the blueant q1, jabra stone and jabra extreme with the same results
i have a Samsung Focus and i am having the same issue with no BT audio from videos. i tested the HTC Surround and LG Quantum at the ATT store with the same results. i am using a Jabra BT3030 which worked perfectly on my Microsoft KIN, audio streamed and play controls (Play/Pause/FF/RW) worked.
A2DP
Does anybody know if an A2DP video fix is coming up in the NoDo update? I'd say it's way more important than copy-paste, but regardless of importance, it is an important feature.
Any news?
noone knows outside of MS as far as i'm aware. we only know about copy/paste and app performance improvements because they told us. only time will tell if they actually fixed the issue.
hands free car kit and voice activation
When my LG is linked to the Bluetooth hands free car kit (Landrover) the voice activation doesn't work.
It opens but it doesn't "hear" anything
Since this is about the only time i actually need voice activation it's a bit annoying
Anyone have any ideas?
I totally agree about this bug. Who the F cares about copy and paste? How about turn-by-turn navigation for Bing Maps like was released last year for WM6.5 ?
Hi everyone,
Got my black Z1c yesterday, love it so far!
However, when I try to use it in my car (Audi A6 2008), I cannot place a call if it was initiated from the car's interface.
The phone connects to BT no probs and shows my car in the devices list as a headset. Incoming calls are reflected on the car's display, and connected to the speaker's/mic of the car. When I place a call from the phone itself - same deal, all works as expected. But when I use the car's controls to dial a number, the car's display shows "connecting", and nothing happens...
Tried to pair/unpair many times, no success. Tried other phones, like iPhone 5, Samsung Ativ S (WP8), Samsung Galaxy S4 Active, HTC One - all work seamlessly. My old Xperia Z was working fine, until I sold it to get the Z1c... I would never expect Z1c to behave like this...
Anyone has similar issues?
Yes mine is the same (ford sync)
Sent from my D5503 using XDA Premium 4 mobile app
Hoagi said:
Bluetooth is a wireless protocol for exchanging data over short distances from fixed and mobile devices, creating personal area networks.
There are two important parameters of Bluetooth devices - class and supported profiles.
"Class" signifies the distance at which a Bluetooth connection is possible. Most mobile devices are Class 2, which means they have a range of up to 10 m. Class 1 devices are rare and have a range of up to 100 feet.
A "profile" is a type of Bluetooth connection. The most common are the Headset (HSP) and Handsfree (HFP) profiles that enable the device to connect to a wireless headset or handsfree.
Some other profiles are OBEX (OBject EXchange) which allows transfer of files, contacts and events; A2DP, which adds support for streaming of stereo sound and AVRC, which allows remote control of playback.
Click to expand...
Click to collapse
... and the reason you have posted this is...?
Aung Thiha said:
try clear caches. All kinds of caches. When I say all kinds, I mean all caches that you can clean. Retry what you want to do. If it does not help, try factory reset and retry your bluetooth connection. if it still does not help, try flash firmware. I guess this is the solution you can count on.
Click to expand...
Click to collapse
Thanks, will try. The phone was just outta box when I was trying it in my car... The car was the first BT device it has ever been paired wtih...
Phone calls work fine on mine.
BUT while we're on the topic of vehicle BT, has anyone got working song info via bluetooth? I thought it was supposed to support avrcp 1.3, but in my car (2013 Ford SYNC) I still get no info about songs I'm listening to and also the voice commands for playing artists or albums don't work.
/Daniel
I use it with my new Golf and the phone functions works as expected but the song info does not show. But they never do with Android phones. My 5s works of course
Sent from my iPhone 5s using Tapatalk
easycure1974 said:
I use it with my new Golf and the phone functions works as expected but the song info does not show. But they never do with Android phones. My 5s works of course
Click to expand...
Click to collapse
In my Toyota Auris 2013 model song info always worked with Walkman app assuming you have tags filled out correctly.
I know there were some issues with tag info in Poweramp I prefer to use but they got that fixed recently. Advanced options to display song info on external BT device is just buried deep in app's settings though.
Everything works fantastic on my BMW F10 (2012) with Navigation Professional, Bluetooth Music with Song Info, Phone with contact pictures (! Didn't even know that was possible until I got the Z10c) and full Message Access Profile with historic E-Mail and SMS access.
The In-Car integration is the main reason why I am torn between iPhone 5s and Xperia Z1c.
The iPhone has the Advantage of "BMW Apps", which allow using Webradio, Facebook, RSS Feeds etc. through the Navigation, as well as iPod Control and Coverart Display.
The Z10 can't do those things, but it can do Bluetooth MAP which is rather important to me also. Webradio can of course be streamed via BT (and controlled on the phone).
I've just got a new (to me) car & BT isn't playing fair... It seems to be a known issue, but I'm keen to get it working...
The phone functions are working fine, but the music/audio function isn't. BT audio isn't showing up in the cars interface, nor on my HTC 10 when connected.
Is there a way to add more profiles or make the phone more visible to other BT devices. The issue is 100% with the car & it probably doesn't support enough protocols, but I'm hoping there's a useful app to help...
bluefoam said:
I've just got a new (to me) car & BT isn't playing fair... It seems to be a known issue, but I'm keen to get it working...
The phone functions are working fine, but the music/audio function isn't. BT audio isn't showing up in the cars interface, nor on my HTC 10 when connected.
Is there a way to add more profiles or make the phone more visible to other BT devices. The issue is 100% with the car & it probably doesn't support enough protocols, but I'm hoping there's a useful app to help...
Click to expand...
Click to collapse
Make and model of car?
I had a similar issue with a BMW and my wife's PRIV.
Had to update the BMW software. They had it on their website for download and install.
Sent from my HTC 10 using XDA-Developers mobile app
The car's a Porsche Cayman. I'm not sure there's a firmware update available... Feckin cheap German engineering!
My last car was a 2009 Nissan Altima and it had a horrible BT stack. I had to do some workarounds to even get a call to work properly. Newer cars seem to do much better these days.
Like Anandlal suggested, I'd take a look and see if there are any firmware updates for your car. Some makers have them available for download and make it easy to do yourself (Ford comes to mind here). Others may require an update to be applied at the dealer, and that might incur a charge. If they have to do it, you may want to have it done with an oil change or other service to minimize cost and inconvenience.
I feel for you. Cars can be picky and if you get a lazy manufacturer that doesn't update their stuff, you're SOL. I'd hope that for they'd take good care of you considering what you paid for that Porsche.
Good luck!