Related
i'm not sure if this is the right section to ask this but my tilt 2 is not recognized by my computer anymore. I thought maybe it is the phone but it's recognized on other computers so I was wondering is there a way to reinstall the driver on my computer or some other fix someone know of?
I think I saw some threads with similar problems but I didn't see any definitive answer in any.
HELP PLEASE!!!!!!!!!!!!
stevenmc8602 said:
i'm not sure if this is the right section to ask this but my tilt 2 is not recognized by my computer anymore. I thought maybe it is the phone but it's recognized on other computers so I was wondering is there a way to reinstall the driver on my computer or some other fix someone know of?
I think I saw some threads with similar problems but I didn't see any definitive answer in any.
HELP PLEASE!!!!!!!!!!!!
Click to expand...
Click to collapse
Do you have XP or Vista/7? The first step you should try is uninstalling/reinstalling whichevery type of sync software you have on the PC...for XP it's ActiveSync, for Vista/7, it's Mobile Device Center. A fresh reinstall of those sometimes clears this problem up, and it's the easiest solution to try first
I have xp and I have uninstalled and reinstalled but that doesn't do anything my phone still isn't recognize that's why I was wondering if after u uninstall does the driver remains on the hard drive and if so how would u remove the driver so u can reinstall it.
Do you use the same cable when you are connecting it to the other computers? If you do then... well I dont know.. I would still try a new cable and wiggle it a bit
When you uninstall the Active Sync I believe it does take the driver off as well...
When you connect your phone to the computer does it still come up asking if you want to connect via Active Sync, Disk Drive, Internet Sharing?
I'll give you one method that helped me at least when I was having connection issues, have no idea if it is related to yours (and it might not even be applicable to the older XP version of ActiveSync).
While your phone is connected, go into Device Manager and under the Network adapters node, look for "Microsoft Windows Mobile Remote Adapter". If it is there, uninstall it.
After that, disconnect then reconnect your phone.
As a long shot, you would not happen to be running any VPN software would you? A connected VPN always makes syncing the phone impossible.
Is your phone charging while connected?
I had/have a USB connection issue with my Tilt2. It wasn't recognized by the computer, but it was charging. When I connect through bluetooth, it is detected just fine. I am assuming that my issue are the pins in the USB connector on the phone, since I have the same issue with different cables.
Aaron McCarthy said:
When you connect your phone to the computer does it still come up asking if you want to connect via Active Sync, Disk Drive, Internet Sharing?
Click to expand...
Click to collapse
No the only thing it does now is charge.
MooGoo said:
I'll give you one method that helped me at least when I was having connection issues, have no idea if it is related to yours (and it might not even be applicable to the older XP version of ActiveSync).
While your phone is connected, go into Device Manager and under the Network adapters node, look for "Microsoft Windows Mobile Remote Adapter". If it is there, uninstall it.
After that, disconnect then reconnect your phone.
As a long shot, you would not happen to be running any VPN software would you? A connected VPN always makes syncing the phone impossible.
Click to expand...
Click to collapse
I will try what u suggested. no i don't have any vpn software installed on my computer anymore.
jcterry said:
Is your phone charging while connected?
I had/have a USB connection issue with my Tilt2. It wasn't recognized by the computer, but it was charging. When I connect through bluetooth, it is detected just fine. I am assuming that my issue are the pins in the USB connector on the phone, since I have the same issue with different cables.
Click to expand...
Click to collapse
yeah it's still charging but that is it... nothing else happens
Every so often when I connect my phone to my pc all it does is charge.. All I do to fix it is soft reset the phone AND restart the computer. Usually after that it works fine. If not just take it off and put it back on the dock or cable.. if you try a different cable that might work for you too. Or try plugging your cable into a different usb port on the computer
Hi,
my pc isn't detecting my desire any more. I have tried uninstalling HTC sync a few times with different version with no luck.
anyone else have this issue and a hopefully a fix?
djmickyg said:
Hi,
my pc isn't detecting my desire any more. I have tried uninstalling HTC sync a few times with different version with no luck.
anyone else have this issue and a hopefully a fix?
Click to expand...
Click to collapse
Try a different USB port on the PC.
Did you try to root your phone or anything like that, before the usb stopped working?
I've tried 3 with no luck.
I not using the original HTC usb cable, I haven't got it with me ATM to try.
only certain USB cables allow data connection.
I found this out by getting a universal one from PC World and so had to buy a HTC or Blackberry one.
I've tried everything I can possibly think of. I have an Asus Laptop with Windows 7 64 bit and absolutely cannot get my Epic to be recognized. I've uninstalled and re-installed the driver more times than I care to mention. I've tried mounting the device to no avail either. I've tried plugging in the phone into each of the USB ports on the laptop to no avail. I need to get the computer to recognize the device so I can get odin to recognize the phone so I can flash back to stock. Right now it doesn't do so. Does anyone have any ideas of what I can do to get this up an running?
Try installing the 32-bit drivers even if you're on a 64-bit computer....
The same issue comes up. It says that the drivers are not successfully installed (even though the installer goes through) and it says "Unknown Device" over and over.
Are you removing previous drivers?
then rebooting before installing new drivers...
also are you using stock cable?
if so buy a new cable you can get cheap ones online for like a dollar just search micro usb cables
Yes, yes, yes. Does the cable really make that much of a difference? I saw that people have had issues but I mean it charges properly all the time so I figured it was ok to use.
Absolutely!!!!!!!!!!!!!!!!!!!!!!!!!!!1
That cable is worthless get a Blackberry cable they are very durable and dependable.
i was having problems also..... all because of the cable.
I'll probably go buy a cable from Walmart, order a cheaper one online from Monoprice and return the other just so I can odin my phone...I really hope that's the issue though.
sporkisfaster said:
The same issue comes up. It says that the drivers are not successfully installed (even though the installer goes through) and it says "Unknown Device" over and over.
Click to expand...
Click to collapse
does it keep looping "unknown device" in the corner, almost like you unplugging and plugging back in repeatedly?
ifso try cleaning the contacts of the usb port on phone and on the small end of the cable.
if not then try totally uninstalling the drivers you installed and if possible when its saying "unknown device" open the device manager, r-click then unistall in there.
USBDview has always been able to dig me out of the home when ive had usb related driver issues... just run it and delete/uninstall anything samsung/android/adb etc related, reboot pc and phone then try again...maybe even redownload the drivers
http://www.nirsoft.net/utils/usbdeview-x64.zip
http://firon.net/xda/usb_drivers_GalaxyS_x64.zip
update (you replied as i was typing): one bandaid for the cable you could try for now is to take a needlenose pliers or something and slightly squish the micro end to try getting a tighter fit.... i had to do that to the cable i keep at work.
You can always just download kies. That's what I did. When I was trying the standalone drivers I had trouble. Installed kies on both of my laptops and coding works beautifully everytime. And I seriously think you guys are ill. Its a cable... its digital. It either works or.it doesn't. I use my samsung wire exclusively. Its thin and I like contour on the plug. Both cables have worked flawlessly on both of my epics.
Sent from my SPH-D700 using XDA App
RushAOZ said:
And I seriously think you guys are ill. Its a cable... its digital. It either works or.it doesn't.
Click to expand...
Click to collapse
You are wrong.
Cables can have breaks in them which give them intermittent connectivity. Also, since this cable has several (5 I think?) single strands of wire in them, a single wire could be screwed up causing this (or the pin for a single wire on either end) That would still allow it to charge, and partially be recognized by Windows, but not allow it to fully communicate causing this problem.
I have a cable that I only use for charging because it has this EXACT problem. Another cable works perfect, but this particular cable gives me the unknown device.
sporkisfaster said:
I've tried everything I can possibly think of. I have an Asus Laptop with Windows 7 64 bit and absolutely cannot get my Epic to be recognized. I've uninstalled and re-installed the driver more times than I care to mention. I've tried mounting the device to no avail either. I've tried plugging in the phone into each of the USB ports on the laptop to no avail. I need to get the computer to recognize the device so I can get odin to recognize the phone so I can flash back to stock. Right now it doesn't do so. Does anyone have any ideas of what I can do to get this up an running?
Click to expand...
Click to collapse
look up and install pdanet. Pick samsung and let it do it's thing.
you're good after that.
Milkman00 said:
You are wrong.
Cables can have breaks in them which give them intermittent connectivity. Also, since this cable has several (5 I think?) single strands of wire in them, a single wire could be screwed up causing this (or the pin for a single wire on either end) That would still allow it to charge, and partially be recognized by Windows, but not allow it to fully communicate causing this problem.
I have a cable that I only use for charging because it has this EXACT problem. Another cable works perfect, but this particular cable gives me the unknown device.
Click to expand...
Click to collapse
Right.. so it either works or it doesn't lol if both cables are in perfect working condition then there would be no issue. Its all preference. I personally use a blackberry micro usb cable. It locks in to the usb port on the phone better. Just so im not paranoid about the wire coming off while flashing... cuz thats bad lol
Sent from my SPH-D700 using XDA App
RushAOZ said:
Right.. so it either works or it doesn't lol if both cables are in perfect working condition then there would be no issue. Its all preference. I personally use a blackberry micro usb cable. It locks in to the usb port on the phone better. Just so im not paranoid about the wire coming off while flashing... cuz thats bad lol
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I didn't articulate myself clearly, but that is my fault.
If a single wire inside the cable is broken (for the sake of simplicity let's just say it is the RECEIVE cable - from the device to the PC). The PC can recognize that there is a device there, but because the device can't talk to the PC, Windows can tell there is something there, but has no idea what it is since the device can't talk back to the PC. Also, in this scenario the cable would charge just fine since those individual lines are intact.
RushAOZ said:
You can always just download kies. That's what I did. When I was trying the standalone drivers I had trouble. Installed kies on both of my laptops and coding works beautifully everytime. And I seriously think you guys are ill. Its a cable... its digital. It either works or.it doesn't
Click to expand...
Click to collapse
1st off u sir, ARE WRONG.... Maybe when it comes to HDMI Cables but not for these phones.
sporkisfaster said:
Does the cable really make that much of a difference? I saw that people have had issues but I mean it charges properly all the time so I figured it was ok to use.
Click to expand...
Click to collapse
To quote u "Yes yes yes" it does make ALL THE DIFFERENCE... I had the same problem and made serveral posts about it when the phone 1st came out, I tried everything... Uninstalled/Reinstalled/Rebooted many times, Manually deleted the folders where the drivers are held then Re-installed, Installed Kies (which is a P.O.S. and was a BIG WASTE OF TIME imo.) I tried everything and just about gave up until 1 day i looked @ my roomate and asked him 2 let me borrow his cable to his cheap cricket phone 2 see if it would make a difference.
Well it worked... Get a new cable, if you've done what ive done and it still doesnt work, its the cable and not the drivers
I've done just about all I freaking can on this as well.
I've installed, un-installed, and re-installed the drivers. I'm running Windows 7 64 bit on Bootcamp.
I've used USBDView, I've uninstalled all of the connected drivers. They get re-installed, but the phone keeps keeps coming up as an Unknown Device. I try and locate the Samsung USB drivers directory, but it keeps coming up as Unknown.
Does anyone know specifically what directory I should use choose when trying to manually link the driver in Device Manager? I'm having a ***** of a time here.
Anybody have any ideas for me? Thanks.
I had the same problem. Buy a new cable from monoprice. The second I bought a new cable for my 64 bit Asus laptop it worked.
Trust me, buy a new cable.
Sent from my SPH-D700 using XDA Premium App
my solution for odin
sporkisfaster said:
I've tried everything I can possibly think of. I have an Asus Laptop with Windows 7 64 bit and absolutely cannot get my Epic to be recognized. I've uninstalled and re-installed the driver more times than I care to mention. I've tried mounting the device to no avail either. I've tried plugging in the phone into each of the USB ports on the laptop to no avail. I need to get the computer to recognize the device so I can get odin to recognize the phone so I can flash back to stock. Right now it doesn't do so. Does anyone have any ideas of what I can do to get this up an running?
Click to expand...
Click to collapse
I had the same problem. I didn't follow directions to solve my problem in Odin. I had to start Odin and plug my phone in and quickly put the phone into download mode. I did that a few times and finally got it to recognize. With Syndicate, it now recognizes every time. I say that now. LOL
This is how I fixed this problem. After doing all I could think of, uninstall, install, system restore, nandroid restor to when phone was being recognized... all these didn't work for me. I still got the same unknown device in device manager.
The fix: with samsung epic drivers already installed. Turn the phone on, plug into your computer. Let device manager find unknown device. Power off the phone. Boot into recovery. Pc will recognize your phone as samsung android device. Reboot your phone and you should be good to go. Hope this works for the rest of you. Good luck.
Sent from my SPH-D700 using XDA App
boy143878 said:
This is how I fixed this problem. After doing all I could think of, uninstall, install, system restore, nandroid restor to when phone was being recognized... all these didn't work for me. I still got the same unknown device in device manager.
The fix: with samsung epic drivers already installed. Turn the phone on, plug into your computer. Let device manager find unknown device. Power off the phone. Boot into recovery. Pc will recognize your phone as samsung android device. Reboot your phone and you should be good to go. Hope this works for the rest of you. Good luck.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Isn't the original issue that the driver install fails? not that the device isnt being readed?
Zune will not show my Samsung Focus as being connected to my computer. It shows up under device manager as Windows Phone USB and if I try to access pictures or music on the phone while connected, it says "connecting/syncing with computer" and will not let me access. So everything seems to think its connected except for Zune
It works fine on my netbook so I thought windows on this computer was messing up. So I reinstalled windows (after reinstalling zune multiple times), and the same problem. It opens up Zune as soon as I connect the phone, but it does not show my device as being connected.
Might be a computer hardware issue, but its a relatively recent build with a core i5 processor so im not sure. Any help/tips appreciated.
have you tried a different USB port and/or different cable?
The Gate Keeper said:
have you tried a different USB port and/or different cable?
Click to expand...
Click to collapse
Yes I have tried the front ports, the back ports, and a powered USB hub. All have the same result.
I only have 1 microusb cable (the one that came with the phone) and it works fine connected to my netbook and charger. So I don't think the cable is faulty. But I ordered another one off monoprice just to be certain. I will test that once its here.
Is there an alternate program which I can use to transfer media on/off my phone instead of Zune?
afraid not.
have you tried disabling your firewall and/or antivirus just before connecting and seeing if things run then? if so, i'm guessing one/both of them are stopping it from syncing.
I had an issue with this before as well. Make sure the cable you are using is the actual Samsung Cable...other cables don't seem to work.
If it still doesn't work, try de-associating the phone from the zune software/perform a hard reset.
Try doing a battery pull and then restarting the phone and trying... That's what I have to do. I am running 7008
Sent from my SGH-i917 using XDA Windows Phone 7 App
Hey guys, just wondering if anyone had this before:
I am able to charge the devices, but nothing related to USB transfer works...
I am stock, not rooted, with latest version available for the Telus' E973
I've tryed 3 PCs, 2 cables, hard resetted the thing but nothing...
So far, I'm thinking I'd RMA the thing...
Does phone ask about mode when you plug it in?
Also, does the computer make any sound or showing that it's plugged in under computer or device manager?
Sounds like USB cable problem, but if you tried 2 cables the odd it's the problem are really low.
Sent from my Galaxy Nexus using xda premium
Nothing on either the computer nor the device, no changes in the device manager...
Was having same problem.
Redownload/install the ADB drivers or whatever they are, and all other drivers. Worked for me. Mainly the ADB ones.
You mean on a computer or on the device?
I've tried on multiple computer which were working before, and nothing is being "added" when pluging in the device, so it's most likely not a driver issu on the computers.
Maybe you broke the connector? What os does the pc have
Tried with Windows 7 x64 and x86 and Windows XP, same thing on 3 PC's
No reaction either on the PC's or the device.
Definitely broken connector
I'll keep you posted, I'm going to check out with my reseller tonight or mid-day.
So far, I understand that no one had this issue?
Thanks for all the input!
Got there during lunch, it's send out...
Now I'm stuck with a crappy Desire HD...