I need windows 6.5 for Canada Telus HTC Touch Pro 2. Have they released a version for Canada? If so, where could I find it?
I've been trying to upgrade my OS and when I attempt to download the update it gives me an error saying "this download is not suitable for this device" I believe it is because the download is for european phones.
In addition to this question, has anyone had any success unlocking the Touch Pro 2 from Telus to Rogers?
A quick response would be muchly appreciated.
Thank you!!!
ROMs are carrier specific, for the most part. If it isn't on the HTC website, only Telus would be releasing a new ROM. Most carriers have stopped development since the phone has been discontinued. Not likely you'll see a new OEM ROM if one hasn't come out already.
that sucks!! I don't understand why the rest of the world is compatible with this upgrade but canadian clients arn't? doesn't make much sense to me. but thank you for the reply
discreet250 said:
that sucks!! I don't understand why the rest of the world is compatible with this upgrade but canadian clients arn't? doesn't make much sense to me. but thank you for the reply
Click to expand...
Click to collapse
Complain to your carrier. The stock ROMs are locked to the carrier they are released to by design. If Telus doesn't have an update for it on their website, then there isn't one available. As far as unlocking it to use on another cellular network, you would have to obtain an unlock code from your carrier. This would SIM unlock your device, allowing you to use any GSM carrier with your phone.
Related
I apologize if this is the wrong forum for this, but this seem like the logical one.
I recently purchased a Motorola Q9h from Ebay and did not understand the different networks that are out there. So while the phone works on the Cingular network it only has Edge because to have 3G it has to be UTMS 1900 and the phone I have is set at UTMS 2100 which is a European network, so everytime I restart the phone it says that it cannot find a suitable network to connect to.
My question is, does anyone know if there is a possibility to do a ROM update to change the network portion. I am guessing no, because I am sure it is hardware based but I thought I would ask.
I should have just waited for the new phone to come out but I am like many others I am sure that we are impatient =P
If you can answer the question or have some suggestions please feel free to let me know =)
thanks,
Brad
I have Q9h too and I didn't lock my MOTO before, but I install a new ROM by AT&T from official Motrola Website and now my phone is lock. Could anybody help me? I need unlock my Q9h.
Thanks
dears
I have upgraded my MotoQ9h from AT&T to WM6.5, its locked and i need the unlocking code what should i do
thanks
Need to unlock my device
Dears developers
I still waitting for you answer about unlock my device its moto q9h and upgraded it o wm6.5, its now locked by AT&T
best regards
q9 unlock
i can help with unlock add me at [email protected]
may be it little hard to recognise the word of chinese...
will u need chinese rom? english is included..
when you upgraded you cellphone's firmware,
<regional setting >change the laugaue from chinese to us english..i can show you how to chage
here is website link... i have a set att q9h...
developer kitchen them
21854
20282
23004
28004
To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
sounds bad....
sent me a mail.. vonnycsl#gmail.com
if you want you phone upgrade to wm6.5 from wm5.0 or wm6.1,
and your phone was customsied by AT&T
first,upgrade this rom
Q9_01.09.28DR_ATT_UnLocked for flash or flash
Q9.01.09.28R_WM6.1_EN_For_USA-AG-USER
for refresh BP files
second,upgrade this rom,whick customsied by Vodafone
SHIP_NORMAN_AP_U_01.01.03R_Only_AP
for refresh AP files
then ,flash any rom you like....
if it doesn't work
go to buy a unlock code will be the best chioce...
cost you $5 ,to buy a unlock code
tartzcr said:
if it doesn't work
go to buy a unlock code will be the best chioce...
cost you $5 ,to buy a unlock code
Click to expand...
Click to collapse
If it doesn't work flash it again. It works for me 23090 and 28004. 23004 only once flash enough.
mbaydoun said:
Dears developers
I still waitting for you answer about unlock my device its moto q9h and upgraded it o wm6.5, its now locked by AT&T
best regards
Click to expand...
Click to collapse
buy a unlock code,it cost u 5$
and flash the norman_ap files first， vodafone offical rom may lock u again,but don;t worry, u have bought a unlock code anyway
first step flash this
http://data.mofan.mobi/Motorola/Q9H/SHIP_NORMAN_AP_U_01.01.03R_Only_AP_WwW.MoFan.MoBi.rar
second a BP files which u like(and it really unlock) such as
ALL BP
http://data.mofan.mobi/Motorola/Q9H/MODEM4_U_40.02.5AP_1R_WwW.MoFan.Mobi.rar
http://data.mofan.mobi/Motorola/Q9H/MODEM4_U_40.02.B0R_WwW.MoFan.Mobi.rar
http://data.mofan.mobi/Motorola/Q9H/MODEM4_U_40.03.05R_WwW.MoFan.Mobi.rar
http://data.mofan.mobi/Motorola/Q9H/MODEM4_U_40.03.07R_01_WwW.MoFan.Mobi.rar
ALL BP WITH GPS
http://data.mofan.mobi/Motorola/Q9H/MODEM4_U_40.11.25R_WwW.MoFan.MoBi_GPS_Unlocked.rar
http://data.mofan.mobi/Motorola/Q9H/MODEM4_U_40.11.40R_04_WwW.MoFan.MoBi_GPS_Unlocked.rar
http://data.mofan.mobi/Motorola/Q9H/MODEM4_U_40.11.0FR_WwW.MoFan.MoBi_GPS_Unlocked.rar
third: flash any rom u like
bradclampitt said:
I apologize if this is the wrong forum for this, but this seem like the logical one.
I recently purchased a Motorola Q9h from Ebay and did not understand the different networks that are out there. So while the phone works on the Cingular network it only has Edge because to have 3G it has to be UTMS 1900 and the phone I have is set at UTMS 2100 which is a European network, so everytime I restart the phone it says that it cannot find a suitable network to connect to.
My question is, does anyone know if there is a possibility to do a ROM update to change the network portion. I am guessing no, because I am sure it is hardware based but I thought I would ask.
I should have just waited for the new phone to come out but I am like many others I am sure that we are impatient =P
If you can answer the question or have some suggestions please feel free to let me know =)
thanks,
Brad
Click to expand...
Click to collapse
answer one
Q9h_OnlyBP_MODEM4_U_40.11.40R_12
flash this BP（radio） file to you handset may help u
because most of q9h work in 1900(for ex att’s q9h
Europe network basic is in 2100
if it doesn't work
there is a selection in setting menu,which can change the handset's wave band from 1900 to 2100
How did you upgrade the Q 9h to WM 6.5, I am on AT&T. Is there anyway to get 6.5 for my phone?
Hello,
I have recently got a ATT Q9H Global and have flashed it to the ROM here
SHIP_NORMAN_AP_U_01_10_05R_MODEM4_U_40_11_40R_12_U SNORMAN25RTDER2W611A002_1FF-Enterprise-German_3801569218
Everything is working we'll, except the keyboard fix (Z/Y Interchanged). I'd like advise on two things;
1. How do I get 3G working. I am in Tanzania where the GSM signals are 900/1800.
2. Also - What do I need to do to get 6.5 - just flash, or downgrade to stock, then flash. If I flash with a 6.5 ROM - can you direct me to an APP unlocked, SIM/Network unlocked, Unbranded 6.5 that has GPS/3G?
tartzcr said:
if it doesn't work
go to buy a unlock code will be the best chioce...
cost you $5 ,to buy a unlock code
Click to expand...
Click to collapse
Where could I buy an unlock code of $5? I have been looking online and they appear to be >$35
I'm curious
From what I've read only people with Hard SPL unlocked TP2s can upgrade to the official WM 6.5.
What will happen for CDMA users who cannot yet unlock their TP2's?
Will HTC provide an update tool which will work regardless or will we still be waiting for the Hard SPL unlocker in order to update.
I'm thinking the ROM update will include a tool as it wouldn't make sense to offer a ROM update without a way to actually update.
Am I wrong?
pistol44 said:
I'm curious
From what I've read only people with Hard SPL unlocked TP2s can upgrade to the official WM 6.5.
What will happen for CDMA users who cannot yet unlock their TP2's?
Will HTC provide an update tool which will work regardless or will we still be waiting for the Hard SPL unlocker in order to update.
I'm thinking the ROM update will include a tool as it wouldn't make sense to offer a ROM update without a way to actually update.
Am I wrong?
Click to expand...
Click to collapse
The only way of doing it is using the GoldCard way...
wow. no only cooked roms need to have your phone to be unlocked. stock roms from the carriers do not need for your phone to be unlocked.
Blad3 said:
wow. no only cooked roms need to have your phone to be unlocked. stock roms from the carriers do not need for your phone to be unlocked.
Click to expand...
Click to collapse
Which is what I thought but I read a few places that T-Mobile users had to have theirs unlocked to update it to one on HTC's website.. ok well nevermind then!
The T-Mobile TP2 and the Unbranded TP2 are different devices. The official ROM on HTC's website is intended for Unbranded devices. T-Mobile users (such as myself) have to wait for T-Mobile to release a ROM for their own devices
Ok I just got a really sweet deal
150$ brand new in box unlocked Lumia 900 Black... I LOVE IT!!!!!!!!!!!!
now the only thing is...its branded to TelCel mexico
Are the roms in the dev sectoin interchangeable?
Will flashing another rom re-lock my device?
Also any idea why LTE would not show up on my device...its marked 4G
I got the right sim from my provider, and I am in an LTE area
THank you all in advance if you can provide me any insight regarding these questions
rob243 said:
Ok I just got a really sweet deal
150$ brand new in box unlocked Lumia 900 Black... I LOVE IT!!!!!!!!!!!!
now the only thing is...its branded to TelCel mexico
Are the roms in the dev sectoin interchangeable?
Will flashing another rom re-lock my device?
Also any idea why LTE would not show up on my device...its marked 4G
I got the right sim from my provider, and I am in an LTE area
THank you all in advance if you can provide me any insight regarding these questions
Click to expand...
Click to collapse
Not sure about the interchangeable ROMs. But as far as I know Telcel don't sell Lumia 900s that supports LTE.
Heck, not even the iPhone 5 is LTE at the moment. However iPhone 5 can be upgraded to LTE with a software update.
Cheers,
Rayan
Sent from my GT-N7000 using Tapatalk
Ok I just got a really sweet deal
150$ brand new in box unlocked Lumia 900 Black... I LOVE IT!!!!!!!!!!!!
now the only thing is...its branded to TelCel mexico
Are the roms in the dev sectoin interchangeable?
Will flashing another rom re-lock my device?
Also any idea why LTE would not show up on my device...its marked 4G
I got the right sim from my provider, and I am in an LTE area
THank you all in advance if you can provide me any insight regarding these questions
Click to expand...
Click to collapse
If you have 4G on your screen it is LTE, if you see H is HSPA,
I have a Rogers Lumia 900 LTE from Canada, and I had a lot of connectivity issues, I loaded it with Telcel MX firmware and I can tell you its the best ROM available.
1.- Fixed all Connectivity issues
2.- APN settings, including MMS are automatically detected
3.- Removed all Rogers Branding (Rogers Lumia 900 doesn't have any branding on the exteriors, so after flashing with Telcel ROM its like a new factory unlocked device with no branding at all)
4.- Telcel ROM doesn't have any operator custom preloaded apps
5.- The only thing I was nervous was the disappearance on the LTE logo, but apparently they only replaced LTE and HSPA+II by 4G.
6.- Internet Sharing started working (Didn't work with Rogers Firmware with my current carrier CLARO)
There si another post that mention this:
http://forum.xda-developers.com/showthread.php?t=1905734&page=2
Bottom line, stay with it, it works great!!
thanks alot
Thanks alot for this, I did notice that the telcel rom has no carrier branding, and after reading all your points concerning rogers rom I am definately staying with this one "if its not broke - don't fix it" very helpful post mods feel free to close this thread.
When you changed ROMs, did you run into a signature error? How did you overcome that? It seems some handsets are tied to their specific carrier -- short of upgrading with a same carrier ROM, the update fails with message 'problem with file signature'. or something along those lines.
Cheers
aquanaut88 said:
When you changed ROMs, did you run into a signature error? How did you overcome that? It seems some handsets are tied to their specific carrier -- short of upgrading with a same carrier ROM, the update fails with message 'problem with file signature'. or something along those lines.
Cheers
Click to expand...
Click to collapse
I have a Rogers phone that is unlocked and being used on Bell and it is flashed with this rom as well. I used Nokia Care Suite and got the rom through the data package manager. It flashed without any problems. There haven't been any updates through Zune yet so I don't know what will happen when 7.8 is released. If it doesn't do the update automatically I'll just update it again through Nokia Care Suite.
aquanaut88 said:
When you changed ROMs, did you run into a signature error? How did you overcome that? It seems some handsets are tied to their specific carrier -- short of upgrading with a same carrier ROM, the update fails with message 'problem with file signature'. or something along those lines.
Cheers
Click to expand...
Click to collapse
Didn't happened anything like that to me, just looked for my RM in Data Package Manager downloaded the latest one and loaded it using Nokia Care Suite
Thanks... glad it at least works for the Rogers devices. I'm guessing there's something added to the AT&T versions which prevent swapping carrier ROMs, even within the same RM group.
I've tried modifying the product code both in the file names and within the files. Still fails with file signature error.
aquanaut88 said:
Thanks... glad it at least works for the Rogers devices. I'm guessing there's something added to the AT&T versions which prevent swapping carrier ROMs, even within the same RM group.
I've tried modifying the product code both in the file names and within the files. Still fails with file signature error.
Click to expand...
Click to collapse
I have the same issue, maybe try flashing it to an earlier ROM from AT&T that doesn't have that limitation?
Doing a field exercise with my unit so it may be awhile before I get to try it myself.
I actually tried that a week ago... rolled AT&T rom back to 8112 (nothing earlier available on NaviFirm list). Same complaint.
Hi Guys I'm working on a Project for a Client. He has some galaxy G960F/G965F and they are branded with a carrier Telstra Air and we would like a STOCK Rom to flash on phones to remove all traces of that Carrier info. Not looking for custom Rooted Rom, because he would like to be able to update the phones when a new software update comes out.
I have tried everything with NO Luck, and I'm sure one of your developers know how to do this. Please contact me private message if you already have this or would like to create it for me PLEASE, I will compensate$$$ you for your time. contact me so we can talk on skype or whatsapp. This is a Urgent Matter your Appreciation is More Than Welcome thank you!!!
PS Admin please advice me if its ok to post this thread thank you
noelb2 said:
Hi Guys I'm working on a Project for a Client. He has some galaxy G960F/G965F and they are branded with a carrier Telstra Air and we would like a STOCK Rom to flash on phones to remove all traces of that Carrier info. Not looking for custom Rooted Rom, because he would like to be able to update the phones when a new software update comes out.
I have tried everything with NO Luck, and I'm sure one of your developers know how to do this. Please contact me private message if you already have this or would like to create it for me PLEASE, I will compensate$$$ you for your time. contact me so we can talk on skype or whatsapp. This is a Urgent Matter your Appreciation is More Than Welcome thank you!!!
PS Admin please advice me if its ok to post this thread thank you
Click to expand...
Click to collapse
What firmware are you on as far as I know tesltra air is just an app to automatically connect to free wi-fi on Telstra networks.
Are the phones network locked ie: can you put in another Sim from a different carrier like Optus or Vodafone.
What have you actually tried to do
what about this ?
G960FXXU2CSC8
(search on google and download it via sammobile , there is no bloatware and you can get the updates without a problem (with that one most of the time y get the security patch faster but you may loose some features)
or that G960FXXS3CSD2 it may take a few days more to get the update (based on my usage)
spawnlives said:
What firmware are you on as far as I know tesltra air is just an app to automatically connect to free wi-fi on Telstra networks.
Are the phones network locked ie: can you put in another Sim from a different carrier like Optus or Vodafone.
What have you actually tried to do
Click to expand...
Click to collapse
No the network is open I tried another sim from the USA: Tmobile, ATT, Verizon and Metropcs. Im on G960FXXU2CSC8 firmware version and I just upgrade to G960FOXM3CSD1.
Ok fellas I figured it out I follow the instructions from this thread:
https://forum.xda-developers.com/ga...de-how-to-change-s9-s9-csc-model-csc-t3870836
and I was able to change the CSC to OXM then I flash a rom from United Arab Emirates and all carrier info was gone and phone works perfect. Special thanks to those guys from the thread it really works!! Thank you Thank you guys and for all who replied and where willing to help. If anyone need help with this same situation contact me I can help
I think this has been asked before in a different way in this section but no real response yet. I did some research in the other Samsung device forums and see that often it is possible to remove branding or switch carriers adjusting device ID and bootloader etc. But no idea how to do it for the Tab S4.
I'm sick of waiting for slow updates through T-Mobile (or any carrier) and would like to fully unlock it's potential with Android 10 rather sooner than later. I bought this device second hand network unlocked.
Any short or long answer to these questions? Can it be done? If so where to start?
Am looking to do so, with the t835 you will have full calling functionality,,,
Cidious said:
I think this has been asked before in a different way in this section but no real response yet. I did some research in the other Samsung device forums and see that often it is possible to remove branding or switch carriers adjusting device ID and bootloader etc. But no idea how to do it for the Tab S4.
I'm sick of waiting for slow updates through T-Mobile (or any carrier) and would like to fully unlock it's potential with Android 10 rather sooner than later. I bought this device second hand network unlocked.
Any short or long answer to these questions? Can it be done? If so where to start?
Click to expand...
Click to collapse
Ramiyounan said:
Am looking to do so, with the t835 you will have full calling functionality,,,
Click to expand...
Click to collapse
not needing the calling function on a tablet. but steady updates are welcome... tired of waiting twice.. first for Samsung with slow update policies then another time for carriers that already got their money and cant care much a anymore...
i'd be looking for T835C since I'm in China now.
Cidious said:
Any short or long answer to these questions?
Click to expand...
Click to collapse
The short answer is no.
I've tried that after I found my T837V can be successfully loaded with T837R4/T837T/... firmware. I thought maybe I could flash stock firmware of other versions. But if you do that with any firmware other than T837*, you will get "secure check fail pit" error. So sadly no.
ivesun said:
The short answer is no.
I've tried that after I found my T837V can be successfully loaded with T837R4/T837T/... firmware. I thought maybe I could flash stock firmware of other versions. But if you do that with any firmware other than T837*, you will get "secure check fail pit" error. So sadly no.
Click to expand...
Click to collapse
Thanks for the response! So it does mean you can freely flash T837 versions which could mean I can just wait for the first version that comes out with android 10. Any first release should work. Right?
Turkey version has it:
https://www.sammobile.com/samsung/galaxy-tab-s4/firmware/#SM-T837
Cidious said:
freely flash T837 versions [/url]
Click to expand...
Click to collapse
T837 is Turkey version and I've tried it. It can't be loaded, maybe it need to be T837x which are all US variants.
As for Android 10 update, I think this will work. I'm waiting for the first one who gives the OneUI 2.1 update. So far the Verizon version(T837V) seems to have the most active firmware updates.
In the USA, SM-T837 ARE carrier tablets.
There are the SM-T837A, V, and T; ATT, Verizon, T-Mobile. TheSe are locked to the Carrier. If you have them unlock it, OTA upgrades are over. If you know how to hack the firmware, you can write over the carrier version. The best way to go is probably custom ROM AND ROOTING. But in other nations, it will probably work to write a different Samsung ROM. The SM-T835 HAS no US version, so you can probably write any tab s4 Factory ROM to it.
The USA HAS so many cellular devices, the rules are strict. And, the carriers sell the devices pretty cheap. So, they want them to stay with their service.
T-mobile update for android 10 finally out just got it