Since I had a problem yesterday when trying to backup from ROM Manager, with the ongoing recovery Amon-Ra, I was the Desi who had no access to SD.
Following the tutorial to repair the brick USB, I got to read it again and from there I wanted to connect the PC and gave me a driver error, when it was installed with no problems so far, and I have root and s- off.
The fact is that I get an error installing the blututu driver "? and finally not just install the drivers so I have no access usb from windows.
Now the problem: I can not enable blututu from the configuration of Desi, I say start, I think a few seconds and then disconnect.
I tried to flash the radio, thinking that since it is the same chip that controls the wifi, 3g, blututuh, etc ... be solved and has not worked.
I do not know if you have something to do, but I notice that in settings has lost blututu device name. Do you know how I can fix this?
Moved to Q&A
Please do not post question threads in Development.
Post What Where:
General - general technical discussion items, news, anything else that does not fit into the other fora categories.
Q&A (Questions and Answers) - all questions, irrespective of type, get posted in here whether they be theme related, accessory related, technical, etc.
Accessories - any items to do with components and/or accessories relating to your device.
Rom Development - only meant for very advanced technical discussion directly related to ROM development activity and the delivery of actual ROMs and ROM components ONLY. Nothing else goes in here.
Themes & Apps - anything to do directly with the development of themes and/or applications. Nothing else goes in here.
Related
Gpio switch could damage your device...
I just got this message after updating my oneplus 3 to open beta 22. Does anybody know, what this is and what it does? I didn't install it and couldn't find any information about it.
Cheers
Had you followed the rules you would not be worried. This has already been talked about and one plus has already stated that it is a utility for switching antenna in development mode. They are not sure why Google flagged it but it can be removed or kept without any issues.
I'm having weird problems with the PC to USB connection on a oneplus 3. Im trying to get it to recognise so that I can flash it back to stock, but my PC always gives the "the last device malfunctioned" error and it always shows up as "unknown usb device (device descriptor request failed)"...
This happens in MSM bulk mode, fastboot mode and even in recovery mode. Tried it on a windows 7 and 10 pc, no dice, can't even install the driver. Tried a different cable too. It works completely fine on another op3...
Replacing the USB c port didn't work either. Has anyone had a similar issue? Charging works fine...
I'm hoping it's somehow a software issue because otherwise it's looking like a mainboard issue and these seem quite expensive to replace... so any tips or advice are very welcome
Thanks already
THREAD CLOSED! If you're interested in this subject continue to follow in this already existing thread, where the OP has also posted in the exact same time: https://forum.xda-developers.com/oneplus-3/help/usb-device-recognized-t3722279/page2. The post has been copied to that thread.
@dafonehacker
XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse
Looking for some help. I have a ZTE MF833V that works great w/my Mint (tmobile) SIM when plugged into a Win10 PC. I'm having trouble getting it recognized on my IB80A4AL (octa core 64GB android 10). I've tried a few things, and where I am at presently is I have tried to root the head unit. SuperSU reports its not rooted, but after following these instructions here:
PX5 MTCD/E Head Unit Discussion Thread [Rockchip PX5 A53 | Android 8.0 | 2/4GB RAM]
This thread is intended on collect the information about Android 8 (Oreo) over the Android units that features: PX5 Platform Core Board MTCD/MTCE MCU Type The information below is a copy of the same thread for Android 6 by aarick Post 2...
forum.xda-developers.com
I was able to get connected via ADB over wifi, copy the files, and change ownership of the directories listed. PPP widget 3 pops up and says it sees the ZTE modem and asks if I want to use it, and no longer says I need root access, but it errors out with "could not determine system device path for modem" in the logs. I'm outdated in regards to rooting procedures, what is/isn't possible/working in the current android arena, so I apologize for the spotty post. Just hoping someone might guide me to a link, or have some suggestions on the right direction to go to get this USB modem to be detected as a 4g connection device. I also tried kingoroot with no luck. I thought if I could get TWRP loaded, maybe I could try SuperSU or Magisk, but figured I better ask for guidance at this point before I brick something.
Thanks for any help.
Been reading some more, appears maybe I have missed a step, and wound up down a rabbit hole:
Working REAL(!) 3g / 4g USB Modem-Sticks on PX5/PX3 Units
UPDATE 17th sep 2019: PROJECT CLOSED, see post #147 . Okay, we´ve got many threads about "3g/4g" USB-sticks für Car Androids powerd by PX3/PX5. BUT: most posts describe WiFi-Sticks and Sticks recognized as ethernet connection or ´WiFi-Hotspot...
forum.xda-developers.com
Going to play around with changing the connection mode in DC unlocker and see what happens.
Making progress. Plugging in the modem now, the head unit is recognized and I get the little "cell connectivity" icon. Only issue now is that it is staying solid blue, indicating its connected to the LTE network, but not transferring any data. Any idea what I might be missing at this point?
Thanks
I have one with WiFi on it, it only takes power through USB.. It worked fine for me, however I had the same issue as you - it wouldn't download anything.
There's a setting in Android somewhere which say that it won't download anything on WiFi or 3/4G etc. I just set it to "Always allow" or similar..
I can go look for the exact setting if you need, but that should keep you busy for a while, looking for it .
This might be what I did: https://helpdeskgeek.com/help-desk/how-to-resolve-the-play-store-download-pending-issue/
Hello, I seem to have bricked my OnePlus 9 Pro, I was trying to update my phone without losing root, and it got stuck in a Boot loop. I then tried to flash the original os onto the phone without losing data, so I forgot to hard wipe the phone. it's now not turning on at all, No Recovery Mode, no Fastboot, no nothing. I think there's still EDL mode on it, but when I try to fix it using MSM method, it's not showing up. I have installed the Qualcomm driver thing, so it's showing up as that, but No Device is found once trying to fix it with that Method, does anyone have a clue how to fix this.
MOD ACTION:
Thread closed as duplicate of https://forum.xda-developers.com/t/bricked-phone-looking-for-help.4476101/unread
@Aphriz
Please read Rule 5:
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Hello,
my Galaxy S4 Mini GT-i9195 died last weekend out of nothing. Battery was empty, I started it, it boots and switched off again. After I tried to charge it, nothing happens but when I longpress the power button it vibrates one time and the screen stays black.
The phone has TWRP and LineageOS on it and worked fine for some years.
What I've done and what I know:
1) Changed all but the main pcb, I have the same device again and switched all other parts. Same issue, so I'm sure the issue is on the motherboard.
2) Meassured battery current when off 0mA, when on 130-180mA
3) Meassured voltages, 1.8v and 3.0v are there when I switch the phone on
3) Meassured CMD pin on eMMC, the CPU is alive and tries to access the eMMC
What I don't know currently
1) Is the eMMC working correctly
2) Is any other hardware defect?
3) Is there some data corruption on any part of the eMMC?
Before I try to solder something on the phone I would like to test all other ways to recover my data.
The hardware itself is not important, but it would be nice to get the data. The SDcard that was used looks like the data is encrypted, so I suppose the userdata on the eMMC is encrypted as well. This means I hope to get the phone to boot to decrypt all this again.
I've seen that it could be possible to boot the phone from SDCard. Does anyone know how this oculd work?
I have a universal eMMC reader that supports the eMMC used, but don't know if it will work as long as the CPU is powered on.
Has anyone a idea what could be defect or how I can do a further diagnose of the phone to resuce my data?
Hope someone can help. Thanks!
@krater42 Welcome to XDA. When you joined, you agreed to follow the Forum Rules. Please take a moment to review them now, with special attention paid to Rule 5:
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Click to expand...
Click to collapse
The duplicate post you created will be removed.
Sorry for that, read the 5. rule too late. What do you think, were is the best place for this topic? Which one should I delete?
krater42 said:
Sorry for that, read the 5. rule too late. What do you think, were is the best place for this topic? Which one should I delete?
Click to expand...
Click to collapse
Your question is on a Galaxy S4 Mini. This is the right place. We have already removed the duplicate.
Okay, new information. I ****ed up the key combination and now as I do it right, I can boot into ODIN mode.
I tried to read out the pid with heimdall and this doesn't works. On the other phone I tried the same and it works. So I suppose it's not a issue of my setup.