Related
The 9.10 build will not continued. Please chang to the 9.04 Build
http://forum.xda-developers.com/showthread.php?t=640785
The 9.10 build have a lot of problems with the repository.
The 9.04 build is a clean build.
If you like the 9.10 build you can sent me a PM and i sent you the link for the last stable build.
The Rhobuntu team brings you, Ubuntu 9.10 on your Rhodium:
NEW BUILD 08042010. UPLOAD later!
Users with CDMA Phone send me a PM, please
change log:
change log:
* fix WIFI and UMTS
* new keymap (from old 8.04 build)
* add xvkbd
* add x11vnc
* synaptic (Package Manager)
* fix mouse bug
* REPOSITORY SET to Jaunty (Fix Illegal Operation problem)
* lxterminal autostart
--------------------------------------------------------------------------------------------
OLD BUILD
Rhobuntu 06.04.2010
DOWNLOAD: Rhobuntu 9.10 http://www.megaupload.com/?f=MVSBV469
Broken packages
After running apt-get update followed by apt-get upgrade to get the latest package updates from the repositories you'll find that some packages bail out with an 'illegal instruction' error. This is due to a bug in libstdc++6. For now, hold your horses and wait before upgrading. Problem: via apt-get install packet for armv6 will be installed. Htc Rhodium could only handle armv5.
Could anybody help??? --> same problem on Zubuntu 2.0
changelog:
*wifi works, same like rhobuntu 8.04 (lxterminal: iwlist eth0 scan essid `YOUR AP`--> wicd --> refresh
* link for lxterminal placed to /root
Login: root with no password
Screencalibration: after login: type --> ts_calibrate
For GUI: run startx
FIX for mouse bug!
Thanks @ Bombenbach
run lxterminal
leafpad /lib/udev/rules.d/50-udev-default.rules
change
Code:
KERNEL=="mouse*|mice|event*", MODE="0640"
to
Code:
[COLOR="Red"]#[/COLOR]KERNEL=="mouse*|mice|event*", MODE="0640"
old Build:
Rhobuntu 23/03/10
latest build: Rhobunto 9.10 0630PM 23032010 (@walter79)
Download: http://rhobuntu.4shared.com
Mirror:
Rhobuntu 8.04 http://www.megaupload.com/?f=GNO6R1X3
Rhobuntu 9.10 http://www.megaupload.com/?f=MVSBV469
To install via .zip
* Download latest .zip/.tar/.gz/.7z
* Extract to sd card
* Naviagte to sd/Ubuntu
* Load haret.exe
* Enjoy!
changelog: 22032010
* changed to armel !
* based on Zubuntu (http://www.omegamoon.com/blog/index.php?entry=entry090829-014821)
* keyboard mapping now works (Ctrl is FN, FN is E-Mail)
* login: root (no password)
* disabled GDM -> default boot into console
* start Xorg by issuing startx
* for screen calibration run: ts_calibration (in console)
* added nano, libpcap, ppp (UMTS should work)
* sdcard automount to /mnt
Need fix
- wifi (driver have to implemented)
- wicd (same probleme like rhobuntu 8.04, could find network, somebody have to make the same hack like in 8.04)
- double mouse
- remove some apps (like Fennec)
Project News
We decided to organize our project a bit better, which means that we now have a project page on Google Code
https://code.google.com/p/rhobuntu/
and a Wiki
http://wiki.xda-developers.com/index...=RhodiumUbuntu
Get involved. We need your help!
One more Topic of Interest . .
This is getting interesting Rhobuntu will Rock.
I wish I knew how to create linux distro, so I could help.
So my only option is wait and watch for the Progress in these thread.
Compatibility for topaz, blackstone, and others
you can please remove the login screen? make this automatic, because i, with my topaz, have to enable the onscreen keyboard(and not is working, can be the touch screen not working) of haret only for this, the ubuntu arm have any virtual keyboard? the ubuntu have the orca and the Gnome On-screen Keyboard (GOK).
you can try this?
Maikeu Locatelli said:
you can please remove the login screen? make this automatic, because i, with my topaz, have to enable the onscreen keyboard(and not is working, can be the touch screen not working) of haret only for this, the ubuntu arm have any virtual keyboard? the ubuntu have the orca and the Gnome On-screen Keyboard (GOK).
you can try this?
Click to expand...
Click to collapse
Ok, next build comes with autologin and calibration.
new build: 23032010
Hey can u Upload it to any other File sharing host .. I don have a 4shared account .. i have RS .. and when i try to download the file from 4shared.com , d file downloads ..(Obviously slowly) .. and they disconnect very much due to limitation.. RS or hotfile or ne other would be good
Just interested to know - what graphics driver does this build use? Is it possible in theory to the graphics driver from the android builds to allow hw3d and xv acceleration - maybe even compiz?
I dont know if I missed something but I should be able to open the primary applications menu, shouldn't I? I've clicked on it time and time again, I see it change color on me as though I have clicked it but nothing actually opens? Is my screen not calibrated correctly or did I miss something entirely?
walter79 said:
changelog: 23032010
- kernel 2.6.28 armel
Click to expand...
Click to collapse
????
You ported rhodium's code to 2.6.28 ??
Based on which tree ?
And where is the source code ?
- wifi (driver have to implemented)
Click to expand...
Click to collapse
Lol The driver has been included in "my" tree for more than a month now.
And it has been existing for several years now I guess.
phhusson said:
????
You ported rhodium's code to 2.6.28 ??
Based on which tree ?
And where is the source code ?
Lol The driver has been included in "my" tree for more than a month now.
And it has been existing for several years now I guess.
Click to expand...
Click to collapse
Have a look to /etc/modules/kernel..
walter79 said:
Have a look to /etc/modules/kernel..
Click to expand...
Click to collapse
1.That's no sources.
2.I was talking about kernel, not modules. You can make modules for whatever without even having the kernel working.
Hah I wonder if there would be any way you could be able to use aircrack-ng on this??
Either way I love it. All there needs to be is a fixed wifi and a real sleep mode.
buru898 said:
Hah I wonder if there would be any way you could be able to use aircrack-ng on this??
Either way I love it. All there needs to be is a fixed wifi and a real sleep mode.
Click to expand...
Click to collapse
Real ?
Doesn't echo mem > /sys/power/state work ?
I'm not savvy with Linux... ... I know the basic basics. Lol I'll play around with it more but does it really go to sleep?
buru898 said:
I'm not savvy with Linux... ... I know the basic basics. Lol I'll play around with it more but does it really go to sleep?
Click to expand...
Click to collapse
With this command it should.
Maybe backlight isn't turned off though
walter79 said:
Have a look to /etc/modules/kernel..
Click to expand...
Click to collapse
hi walter, your kernel is build 2.6.27 like the other kernel around us (thanks to: phhusson and team).
your modules isn't same version with your kernel. so you need to build modules base on your own kernel version.
could be something like this :
make modules ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-
on your root kernel source. and then do something like :
make modules_install ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-
and then check your modules linux directory for the result.
for getting wifi working, you may need android modules (you can check from phhusson modules build). and then run insmod on your rc.local.
i already reply your message for details.
cheers,
fatsal
fatsal said:
hi walter, your kernel is build 2.6.27 like the other kernel around us (thanks to: phhusson and team).
your modules isn't same version with your kernel. so you need to build modules base on your own kernel version.
could be something like this :
make modules ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-
on your root kernel source. and then do something like :
make modules_install ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-
and then check your modules linux directory for the result.
for getting wifi working, you may need android modules (you can check from phhusson modules build). and then run insmod on your rc.local.
i already reply your message for details.
cheers,
fatsal
Click to expand...
Click to collapse
Wifi works!!
I copied modules from old 8.04 build and wifi-nvram.txt, rtecdc1.bin to /etc
and use the zimage 22032010 build.
And now it works.
Scan works. But same problem with wicd like in 8.04. Can`t find wireless network
In order to make it work I brutally hacked the poor wicd. What I did was to edit /usr/share/wicd/wicd/wnettools.py and replace "cmd = 'iwlist ' + self.iface + ' scan'" with "cmd = 'iwlist ' + self.iface + ' scan last'" After that I deleted wnettools.pyc and wnettools.pyo to make sure that python will generate these files from the hacked wnettools.py. It is indeed a very ugly and nasty hack but at the moment there is probably no better way to make WiFi working. We REALLY should better find out what is the problem with that broadcom module and try to fix it.
Its asking for username & password. I type root for username. i cant get into ubuntu what do i type?
Viper Matrix Wireless said:
Its asking for username & password. I type root for username. i cant get into ubuntu what do i type?
Click to expand...
Click to collapse
user: root
password: no
new build will release in a few day. with working wifi auto login and screencalibration
OK I am running 9.10 & it wants me to type a username & I type root n its ok theres no password to enter now im stuck on [email protected]:~# i am stuck in command what do I enter to start ubuntu?
I have ported CM9 (P930) to LG-lu6200, Telephone basic function work fine.Most of the function work fine.
But since use the lu6200 baseband and firmware,GPRS and 3G network can't work, maybe there is some error occurs when CM9 RIL layer calling 6200's baseband，some compatibility error. Have any opinions?
Thanks!!!
http://bbs.fengbao.com/thread-997843-1-1.html
I will take a look, if i can help you i will.
Thank you very much for your reply.
This is the download link：
http://115.com/file/be13g5qz#
lu6200-cm9-20120624-NIGHTLY.zip
Only gps and data network are missing?
What is the change in kernel have you done so far.
Sent from my LG-P930 using xda premium
Hi HO!NO!,
i think he means GPRS isn't working. I just tried the latest version and it works fine (no camera issues now), except there is no way to establish a data connection via GPRS or 3G.
Also i cant connect via USB as mass storage now, in fact if i connect USB cable there is no dialog asking me which connection i want. That issue i didn't have on the 19.06.2012 version.
I made a thread in the LU6200 section for this CM9 version, maybe we can share infos there:
http://forum.xda-developers.com/showthread.php?goto=newpost&t=1721930
@jxxhwy: Good work so far! Keep it up... :fingers-crossed:
@HO!NO!: Thanks for looking into it! You keep it up too...
device:https://github.com/CyanogenMod/android_device_lge_p930
930 kernel:https://github.com/CyanogenMod/lge-kernel-iproj
based on the above compiled, modify some scripts files and kernel source file(fix sensor dirver)。
i use cat proc/cmdline, found out ro. Baseband = svlte2a.
so i added in init.iprj.rc content:
on property:ro.baseband=svlte2a
wait /dev/ttyHSL1
mkdir /data/qcks 0770 system system
exec /system/bin/sh /system/etc/init.qcom.mdm_links.sh
start kickstart
lu6200 can flash in p930 cm9 kernel,just changed to correct partitions ,etc/scripts ,baseband version invoking.
Bootloader versions also important, because 6200 have engineer version bootloader.I guess, maybe is the version same as p930.
lu6200 device github:https://github.com/jxxhwy/lg-lu6200-device
Please place to device/lge/lu6200 directory.
lu6200 kernel https://github.com/CyanogenMod/lge-kernel-iproj
Just replace attachment files：board_i_atnt.c
Please place to kernle/lge/lu6200 directory.
run script:
. build/envsetup.sh
lunch
make bootimage -j4
HO!NO!,DEV cm9 for lu6200 please! In order to world peace!
Code:
This is still alpha version you are flashing this on your own responsibility
Dont blame me if your phone turns into a termonuclear bomb and explode
into a big mushroomcloud that destroys the whole town
Dont blame me if you turn into hulk by using this ROM.
Dont blame me if your alarm app fails and you get fired or you miss
your wedding
You chose to make these modifications, nobody made you do it.
I will update this ROM every 4 to 7 days from Shelnutt2's nightlys. If there is a major fix in a nightly then i will not wait 4 days i'll update emediatly. If you find a bug that you know how to fix then feel free to write here or if you have time make a patch, this is a big project to be maintained by 2 guys. If there is a dev here on Hero GSM forums that is willing to help then help
Features:
---JELLYBEAN
---Google Now
---Ported from Shelnutt2's HeroC nightly's
---Using Las Venturas 1.2 kernel by riemer
Problems:
---Slow
---Camera
---Audio besides speaker, very close to full fix.
---Bluetooth (almost fixed)
---Hardware Acceleration (not likely)
How to install:
---Download the rom and put it on your SD card
---Reboot to clockworkmod
---Wipe data
---Go to advanced tab/Wipe dalvik cache
---Flash the ROM
---Reboot and say hello to your new ROM
---Be patient, first boot takes about 10-15 minutes
Tips:
1. ROM is default OC'd to 633 MHz to increase speed, if you have any issues with that speed (graphical glitches or something) reduce it.
2. Go to developer options and enable force GPU rendering
3. If you are a developer go to developer options, root access and enable root to ADB and apps
4. Go to performance settings > memory managment > zRam > 18 or 26%
5. Go to performance settings > Processor > CPU governor > ONDEMAND or PERFORMANCE
6. Go to performance settings > memory managment > allow purging of assets
7. To bypass welcome screen tap all the corners in a clockwise motion, starting with the top-left
8. Install LauncherPro it will give you a bit more speed but it will be ugiler. You pick will you install it or no
Credits:
---Shelnutt2 (A LOT, he builds us nightly's fixes a lot of bugs, awsome guy http://forum.xda-developers.com/showthread.php?t=1736404 go here and hit thanks for him)
---Whoshotjr2006
---jordfaz (Helped and still helping me a lot)
---Eris CM10 crew
---All guys on HeroC jellybean dev thread
---You for testing it
Download links:
26.10.2012
http://tinyw.in/8Ifz
Gapps basic (Play, Talk)
http://www.mediafire.com/?1649hddvr6zn5ur
Screenshots:
For cyanogenmod changelog go to http://review.cyanogenmod.com/ since changelog is a bit big on every new nightly this is the best place to check. Some of these changes are implemented, some will be, some are going to be discarded.. Changelog below this ROM will be for build specific bugs.
Nightly 26.10.2012
->Updated using latest shelnutt2's nightly
->Added GooManager to recieve OTA's on this ROM (To check for OTA's enter GooManager and click check for OTA's)
Nightly 1.9.2012
->Fixed Wi-Fi
->Fixed headset
->Fixed bluetooth, pairing is still a no-go
Nightly 28.8.2012
->Initial Release
Glad you finally released this, will be testing tonight and looking for fixes
Camera will be fixed in next build, 30 min to 1 hour max
kemoba said:
Camera will be fixed in next build, 30 min to 1 hour max
Click to expand...
Click to collapse
Good good, ill redo my CM10 thread when I have time and do Paranoid android CM10
Be carefull : CPU natively OC'd @710 MHz won't boot on any device. You should reduce it @633 to make it bootable by anyone...
No problem, i placed that in kernel because it booted for me, new build is ETA 5-6 hours from now. Camera should work
kemoba said:
No problem, i placed that in kernel because it booted for me, new build is ETA 5-6 hours from now. Camera should work
Click to expand...
Click to collapse
By the way, its not the kernel you edit, its the ramdisk, just so people don't get confused
jordfaz said:
By the way, its not the kernel you edit, its the ramdisk, just so people don't get confused
Click to expand...
Click to collapse
Yup i know, but for me boot.img everything in it is kernel . BTW. Wi-Fi is not working on newest build, i think i have an idea what is wrong
Nice work, I'm surely gonna try .
Thank you, i recommend you wait till i release a new build tonight, it will probably have working camera, headset and wifi
kemoba said:
Yup i know, but for me boot.img everything in it is kernel . BTW. Wi-Fi is not working on newest build, i think i have an idea what is wrong
Click to expand...
Click to collapse
Forgot the symlinks in the updater-script?
No, bad wifi module in /system/lib/modules, get the one from CM9, do adb shell insmod /system/lib/modules/wifi.ko, reboot and viola wifi works No need to symlink modules here
kemoba said:
No, bad wifi module in /system/lib/modules, get the one from CM9, do adb shell insmod /system/lib/modules/wifi.ko, reboot and viola wifi works No need to symlink modules here
Click to expand...
Click to collapse
Thank you for porting this. You're not only helping The Hero community, but also the entire Htc Magic Section.
If you have time, could you send me a PM with the files you have to change when you port from CDMA to GSM. I tried but it didn't worked when I just changed kernels.
Thanks in advance
Keep up the good work!
Installed and booted. But Wifi doesn't seem to work?
You have to fill in your gmail-credentials (at first boot) but it can't verify since wifi isn't working. Does this mean you can only boot CM10 when you have got 3G?
Wi-Fi is a small bug in this ROM, fixed in new version, uploading now ... ETA 10 minutes
Wijnand85 said:
Installed and booted. But Wifi doesn't seem to work?
You have to fill in your gmail-credentials (at first boot) but it can't verify since wifi isn't working. Does this mean you can only boot CM10 when you have got 3G?
Click to expand...
Click to collapse
Flash the las venturas 1.2 kernel, wifi should then work.
But that will probably break usb mass storage and a couple of other kernel related fixes
kemoba said:
But that will probably break usb mass storage and a couple of other kernel related fixes
Click to expand...
Click to collapse
It wont, I told you before, it changes the kernel, the ramdisk is totally different
New build is up
Hello guys
as you know ım working on 3.10 kernel for ancora and(for the other samsung msm7x30s too)
Kernel status:
-all ther device drivers and specific changes applied,updated to 3.10
-kernel is compilable atm
-offmode charging seems to working
but
-kernel isnt booting
ı cant see second bootlogo(ı mean "samsung galaxy w" title)
ı can see first bootlogo(only the "samsung" title) but as ı said no second logo
ı uploaded my work and kernel to my git (so everyone with needed skills can colloborate into this project)
we need DEBUGGİNG
ı need to look into kernel boot logs but unfortunatly adb isnt woreking because in my mind kernel hangs before starting to load init.rc files because of this adb isnt working
ı tried to connect UART for two days but ı dont have good soldering skills plus ı dont have any equipment(like resistors for UART) so ı couldnt connect to it
Kernel sources:https://github.com/sirmordred/android_kernel_qcom_msm7x30
The SElinux status is acting in permissive or in enforcing mode?
Cause either i cannot access adb from PC with enforcing status with a ROM recently released and it didn't pass the boot either
So i switched to permissive
Btw awesome job man
@Mordred : thanks you . you great . This is work hard . May @Christopher83 and @arco68 will help us to fix .
my experience told me you have to move all drivers and edit all kconfig and makefiles + you need to setting up configurations close to stock kernel to get boot, i try that on my s2+ and take about entire week just to add the arch of the kernel, well if patches are compatibile, why not..
Hmmm, looking for some experience on porting kernel 3.10. I stucked with my current device.
bangprovn said:
Hmmm, looking for some experience on porting kernel 3.10. I stucked with my current device.
Click to expand...
Click to collapse
which device do you have bangprovn?
Hi !
This kernel is only for BTV (Beethoven) devices that use LineageOS Oreo 15.1 !
This kernel is quite stable for everyday use but still has many shortcomings - which will be fixed/added in time .
Whenever you have trouble with LineageOS 15.1 ( means random reboots, crashing applications or something like that ) it is worth trying this kernel to bring your device into a stable operating state.
This kernel is based to Android Kernel Linux 4.3.0 .
Downloads:
For All LTE/4G devices : boot_lte_4.3.0.img
For All Only Wi-Fi devices : boot_wifi_4.3.0.img
Installations:
- via fastboot/bootloader mode : [ fastboot flash boot boot_lte_4.3.0.img ]
- via TWRP, by choosing to install image into Boot partition
Source code :
kernel_huawei_btv
surdu_petru said:
Hi !
This kernel is only for BTV (Beethoven) devices that use LineageOS Oreo 15.1 !
This kernel is quite stable for everyday use but still has many shortcomings - which will be fixed/added in time .
Whenever you have trouble with LineageOS 15.1 ( means random reboots, crashing applications or something like that ) it is worth trying this kernel to bring your device into a stable operating state.
This kernel is based to Android Kernel Linux 4.3.0 .
Downloads:
For All LTE/4G devices : boot_lte_4.3.0.img
For All Only Wi-Fi devices : boot_wifi_4.3.0.img
Installations:
- via fastboot/bootloader mode : [ fastboot flash boot boot_lte_4.3.0.img ]
- via TWRP, by choosing to install image into Boot partition
Source code :
kernel_huawei_btv
Click to expand...
Click to collapse
Flashed wifi version with TWRP; errors out a few seconds after starting Linage, then errors out and boots to EMUI screen.
friedsonjm said:
Flashed wifi version with TWRP; errors out a few seconds after starting Linage, then errors out and boots to EMUI screen.
Click to expand...
Click to collapse
I already tested on DL09 ( LTE device ) and I guess it's working as well on Wi-Fi devices .... please try to reinstall the last update of LOS 15.1, and flash this kernel before to exit from TWRP . Thanks !
EDIT: I guess you need to do a full wipe on TWRP if you have some error on boot with this new boot.img ... that's why it's better to flash LOS 15.1 on clean, install gapps and also this new boot.img before to exit from TWRP !
Thanks. It's working well on my BTV-W09
sergio_sant said:
Thanks. It's working well on my BTV-W09
Click to expand...
Click to collapse
Ok, at the moment it is a step back, but I hope that in a few days I'll come back with a new kernel update to 4.4.11 ... I have only one major problem here to fix before it is published ( something to do with charging the battery )
anyone tested plex with this?
orangpelupa said:
anyone tested plex with this?
Click to expand...
Click to collapse
Installed this kernel a few days ago and have no issues with Plex. The tablet has been completely stable with the latest LOS 15.1 build (2020-08-22).
Thanks again serdu_petru
orangpelupa said:
anyone tested plex with this?
Click to expand...
Click to collapse
thunderz1 said:
Installed this kernel a few days ago and have no issues with Plex. The tablet has been completely stable with the latest LOS 15.1 build (2020-08-22).
Thanks again serdu_petru
Click to expand...
Click to collapse
Yes, Plex and all app will working well with this kernel !
Unfortunately it is a step back in updating the kernel, but this problem has already been fixed and the new LOS 15.1 update will come with a new kernel, this time more stable and based on Android Linux Kernel 4.4.11 or 4.4.12