Develop Bugs

[Kernel] .29 Alpha for Cyanogenmod 5 Based ROMs 【aHero】 - For the Impatient

[Kernel] .29 Alpha for Cyanogenmod 5 Based ROMs 【aHero】 - For the Impatient
Here's a quick and dirty kernel compile with bluetooth and SetCPU OC both working for this ROM (and any Cyanogenmod based Hero ROM really). Should not be overclocking on boot.
Uses koush anykernel format to make it compatible for any CM based ROM.
I don't plan to update this. I had no intentions of making a Hero kernel so I probably wont be updating this. It was kind of an accident. I don't even have a GSM Hero. Anyways flash and enjoy! Devs can take what I did on my .config and make it good. There's some weird stuff in it.
If this eats your phone please do not hunt me down.
jaymac407 said:
Boots, testing more now..
Update: Wifi works, bluetooth works, OC seems to work (I THINK)
Good work.
Click to expand...
Click to collapse
I copied the netfilter options too. If someone can try to see if Wifi-tether works that would be awesome.
So apparently my kernel boots this aHero and fixes bluetooth. It's a .29 kernel based on the new source code.
Mind you that I might be missing some things. I took around 20 minutes comparing the existing .config and making one that is more similar to the Cyanogenmod .config by eyeballing differences and copying pasting code (yes really). I got really lazy toward the end because the .config was so damn long.
I at least enabled squashfs so the .sqf files decompress for sure now. Set localversion to cyanogenmod. You can see what I did to it in the download link as well, where I have a pastebin of what I did before I disabled perflock.
I also disabled a crap load of debug options that were enabled for some reason.
credits:
cyanogen for CM5. Based .config off his ROM
toastcfh for the kernel source code and being the father of all MSM7K overclocks
koush anykernel
.config here:
http://forum.xda-developers.com/showpost.php?p=6548814&postcount=53

how do i use this on ahero ? just flash it over the rom ?

Is this applicable to VanillaEclair?

Just flash this zip over my aHero?

Re: [Kernel] .29 Beta for Cyanogenmod 5 Based ROMs 【aHero】 - For the Impatient
Dont work for me om cyanogen mod, runs so slow it freezes. Cant get in set cpu and look
Sent from my HTC Hero using Tapatalk

going to test this now. I will update.

it sseems to freeze at boot (aHero 1.0 with JIT)

mine freeze at hero screen

Does it need a wipe and reflash first, or should it be ok to try over current CM ROM ( Vanillain 3.0 test version) ?

furrypotato said:
Does it need a wipe and reflash first, or should it be ok to try over current CM ROM ( Vanillain 3.0 test version) ?
Click to expand...
Click to collapse
There specific patches for the villain roms, theres one for Vanillain 3. There is a thread with them on xda
I tired it on Vanillian but cant seem to get past the lockscreen

I downloaded toastcfh's kernel source, but I didn't have time to compile..
anyway thanks for compiling, and I'll test it and report back soon..

Demologic said:
There specific patches for the villain roms, theres one for Vanillain 3. There is a thread with them on xda
I tired it on Vanillian but cant seem to get past the lockscreen
Click to expand...
Click to collapse
And me. Best wait I guess for a fix later.

Heh, awesome.
Be advised that this sometimes freezes randomly, that's the only bug I can see so far. Especially during going from and to sleep. That's the only issue that needs to be resolved. Apart from that, everything seems to work.

jaymac407 said:
Heh, awesome.
Be advised that this sometimes freezes randomly, that's the only bug I can see so far. Especially during going from and to sleep. That's the only issue that needs to be resolved. Apart from that, everything seems to work.
Click to expand...
Click to collapse
Try in setcpu to make the governor performance, if not msm7k
the ondemand governor code was broked in HTC source in .27

can i download the zip and flash it on ahero 1.0????

xaueious said:
Try in setcpu to make the governor performance, if not msm7k
the ondemand governor code was broked in HTC source in .27
Click to expand...
Click to collapse
Only options are performance and ondemand. Neither option seems to help with the crashes.

i have downloaded the zip on first page and flash over ahero 1.0 without JIT my phone boots and come to lockscreen and then i cant anything

[17 DEC][ROM] DHD Dungphp 1.6 - Tweakers by Vis [Tweaks+ZRAM+Swap+Data2SD] DMKern2.8

ROM Base by Dungphp RUU Desire HD 3.06.405.1, 3.12.405.1 - With sense 3.0 - Android 2.3.5 Tweakers Edition by Visentinel With STABLE DATA2SD by Sibere
****Pay attention to the install procedure****
Reason for ROM
All tweaked out, and virtually unlimited space thanks to siberes DATA2SD made for Desire roms. ZRAM by Dorimanx and Kernel 2.8 by Dorimanx. Dungphp's sense 3 rom is the best sense rom in town and then i came along and made it even better
Tweaks Feature List
Tweaked IO
- NOOP IO Scheduler set to defualt
- 512 IO Cache
-You can change the above with system tuner set at boot with init.d
Tweaked Ram Management
- Latest Legendary Dorimanx's ZRAM Script
- Automatically mounts mmcblk0p3 for sd-based swap
Stripped Sense 3, just the awesome Sense UI
- Sense 3 Stripped of all useless HTC stock apps + libs (Basically Everything)
- Stripped all downloadable GAPPS
- Launcher Pro is Default, There is no Rosie (Doesn't work after stripping HTC Apps) Install any launcher you prefer
All of Dungphp's rom features...
Working:
- Phone, Sound, Camera, Camcorder, GPS, Data, Wifi, bluetooth ...
- Mount, USB Disk, Gallery, 720p videos, Flash with video, sound streaming ...
Bugs:
- Graphical Glitches - Dont try to fix it, aint as bad as anyone thinks... you can live with it ! - or try and flash a .35 kernel, but performance goes down... is it worth it ?
- Sense Customization settings closes without launching the customization app
INSTALL PROCEDURE
MAGLDR partition sizes - Use Last 24mb NAND - 5/330/10
Install the rom as normal with CWM
Reboot and wait for the rom to finish first boot and complete the HTC wizard, wait a couple of minutes at the launcherpro desktop, you may config wifi and some settings but DO NOT add any accounts to accounts and sync.
Reboot
Flash the Data2SD in CWM
Reboot
Install Superuser from the market
I had to strip "everything" I could to get this rom to boot with enough NAND data space to function before rebooting again to install data2sd. I had 22mb data space left on my first boot.
Enjoy
Download - You Need Both
Download the Rom
Download the Data2SD
Screenshots
Attached to thread.

Introducing the...
FutureLog
17 - dec
Fix the "Customize" in settings. One of the HTC Apps was responsible for that
Maybe a Sense 3.5 release but there isn't much difference between 3 and 3.5 for the purposes of this ROM, also I could not shrink a sense 3.5 rom enough for first boot so..
A. I need time to experiment with more stripping ideas
B. Learn how to integrate Siberes Data2SD
C. Figure out why removing the A2SD+ from the sense 3.5 runny roms released here completely breaks them.
ChangleLog
Future 1.2 - Released as CWM update to 1.1
Better Zram Settings - Attached to this post is an updated 02zram. Flash in CWM.
New 2.9 kernel by dorimanx attached - fixes a bluetooth bug.
1.1
First released version
update kernel to dorimanxs 2.8
update zram to new version
1.0
First Version - tested for 48 hours

Benchmark
Avg NAND Speed = 27200.392 KB/s<=> 26.563 MB/s
Test file in /data/data wich is on sdext by data2sd.
I/O Schedulers and devices Tester by iamcxa

seems a great rom be cooked!
kill the rosie.apk and take out the htc screen is a good idea to make the speed up for performance , i did that for my test build ... it's fast and faster.

iamcxa said:
seems a great rom be cooked!
kill the rosie.apk and take out the htc screen is a good idea to make the speed up for performance , i did that for my test build ... it's fast and faster.
Click to expand...
Click to collapse
Thanks Mate i was nervous about what the first person was going to say you give me a smile.

Visentinel said:
Thanks Mate i was nervous about what the first person was going to say you give me a smile.
Click to expand...
Click to collapse
when i opened the thread i also nervous and especially
that is my first thread.
but be relaxed, i think this will be a stable and cool rom!

tank's bro,downloading now

Cool, you would be the first person other than me to use this rom
let me know how it goes asap, i want to be sure 330m system works, 315 worked for me but as you can see i have under 5mb left.
After you flash go to advanced and report errors, mount sdcard and check the cwm log and make sure all the minzips worked, to ensure you didint run out of system partition space.
And remember to enable use last 24 nand in magldr under services.

Graphic glitches...You're wrong. I can't live with that.
Sent from my HTC HD2 using Tapatalk

mzebrowski13 said:
Graphic glitches...You're wrong. I can't live with that.
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Lol your loss.
Sent from my Desire HD using Tapatalk

Visentinel said:
Lol your loss.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
well ,take out glitches but lose performance ... okay that's depending on users.

Visentinel said:
Lol your loss.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Well now you're right ... V

iamcxa said:
well ,take out glitches but lose performance ... okay that's depending on users.
Click to expand...
Click to collapse
The glitches are barely noticeable ! Don't u agree ?
Sent from my Desire HD using Tapatalk

Visentinel said:
The glitches are barely noticeable ! Don't u agree ?
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
yes but seems get problem in buffer, did you noticed this? if the animation is shorter then glitches doesn't display.
see: http://forum.xda-developers.com/showthread.php?t=1386684

iamcxa said:
yes but seems get problem in buffer, did you noticed this? if the animation is shorter then glitches doesn't display.
see: http://forum.xda-developers.com/showthread.php?t=1386684
Click to expand...
Click to collapse
So your thinking this could be fixed in a .32 kernel if someone could figure out why the .35 kernel fixes it by finding the missing part ?
I am simply hoping soon Dorimanx might dev a .35 kernel with his performance modifications, I think he just needs time.
Just an update on this rom, the latest zram script by Dorimanx is clashing with this roms oom settings, I am going to work on tweaking it. I will post an updated zram script for this ROM once I am satisfied with the settings.
-Update
2nd post has CWM flash zip with a better zram script.
Dorimanx Kernel 2.8 had a Bluetooth Bug, attached to 2nd post is updated 2.9 kernel.

can't test now, but thanks anyway for a new sense work for Hd2!
I suggest to update kernel to 2.9 in order to fix bt bug
I will test this rom next week

Visentinel said:
So your thinking this could be fixed in a .32 kernel if someone could figure out why the .35 kernel fixes it by finding the missing part ?
I am simply hoping soon Dorimanx might dev a .35 kernel with his performance modifications, I think he just needs time.
Just an update on this rom, the latest zram script by Dorimanx is clashing with this roms oom settings, I am going to work on tweaking it. I will post an updated zram script for this ROM once I am satisfied with the settings.
-Update
2nd post has CWM flash zip with a better zram script.
Dorimanx Kernel 2.8 had a Bluetooth Bug, attached to 2nd post is updated 2.9 kernel.
Click to expand...
Click to collapse
yes, that is what i want to say, I think that should has possible be fix. but if someday DM decide to coding .35 ... well, I thought we put it away temporary and try our best for cooking rom first, and if possible then we could try to fix and coding kernel together. because kernel builder not to many but have lot of chefs, so i thought maybe we should join to kernel part to find out the bugs.

iamcxa said:
yes, that is what i want to say, I think that should has possible be fix. but if someday DM decide to coding .35 ... well, I thought we put it away temporary and try our best for cooking rom first, and if possible then we could try to fix and coding kernel together. because kernel builder not to many but have lot of chefs, so i thought maybe we should join to kernel part to find out the bugs.
Click to expand...
Click to collapse
It's a good idea but atleast for me I know nothing of kernels, I can't even figure out how to compile a kernel lol, I have tried.
I will ask dorimanx if he is willing to assist in this tho, I will offer him my full support to test.
Sent from my Desire HD using Tapatalk

If anyone has any sod issues just let me know il make an update to stop loading sd based swap. Usually sd swap is the reason for it.
Posted from my tweaked DHD.

[ROM][4.0.4]SGT7 Builds for the tf300t

SGT7 is the custom ROM by the guys who brought ICS/CM9 to the OG Galaxy Tab
Initially it supported only the first tab, but now we've decided to support other tablets as well, so here it is!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
It's based on CyanogenMod 9, and will continue being to be so.
In short, it's a heavily modded CyanogenMod for tablets, fully opensource
The Team :
Click to expand...
Click to collapse
cdesai
humberos
sbradymobile
Downloads :
Click to expand...
Click to collapse
http://sgt7.tk
Mirror : http://goo.im/devs/cdesai/jenkins
zips with tf300t in it are for the transformer pad
Also available via Goo Manager
Installation and bugs are also same as CyanogenMod 9
So, download the zip, transfer it to the sd, reboot into Recovery and do a backup (always preferred, but optional), then install the zip.
Install GApps afterwards if you aren't coming from a CM9 / CM9 based ROM
Also read the CM9 thread : http://forum.xda-developers.com/showthread.php?t=1669827 (has some useful info)
Since neither of us has the device personally, the builds are untested, and we rely on you, the users, to help us.
Report anything wrong with the ROM, and what you'ld like to see in it.
Report issues here : http://code.google.com/p/sgt7/issues/list
(Do not report device-specific issues, i.e. stuff not working on CM9, report only stuff that you saw as a setting and didn't work as expected)
Lastly, thanks to the CyanogenMod team, for all their work, and thanks to the guys who ported ics to this tab.
It's just meant to be an addition of tablet specific tweaks to CM, and we might look forward to merging this functionality into CM later on, but for now, have fun with this.
Screenshots :
Click to expand...
Click to collapse
https://plus.google.com/photos/116129314276967903080/albums/5746721274320679521
(taken on my Galaxy Tab, if some user flashes this ROM and uploads some screenshots, i'ld be more than happy to link em in the first post)
Source Code:
Click to expand...
Click to collapse
http://github.com/sgt7
I plan on doing weekly builds on my personal pc, or when a big feature is released / something big is fixed (device specific), i'll try to release a new build

Awesome thank you! Gonna try this out now.
*EDIT*
Okay so after playing around with the rom, I have no sound. Made sure it wasn't muted or anything.
*EDIT again*
Not sure what's going on, now I lost my sound regardless of what rom I'm on. Tried wiping data and everything. Gonna keep on checking out to see what's wrong.

oo3 said:
Awesome thank you! Gonna try this out now.
*EDIT*
Okay so after playing around with the rom, I have no sound. Made sure it wasn't muted or anything.
*EDIT again*
Not sure what's going on, now I lost my sound regardless of what rom I'm on. Tried wiping data and everything. Gonna keep on checking out to see what's wrong.
Click to expand...
Click to collapse
My bad, sorry, the vendor sync failed, re building now, will re upload shortly.

Thank you. I had to restore my original Asus nandroid backup to get my sound back. Then from there wiped and loaded the CM9 experimental version.

Just a few questions, does sound work now? Does MTP work? Thanks!

Fire Mars said:
Just a few questions, does sound work now? Does MTP work? Thanks!
Click to expand...
Click to collapse
Sound should with the build i just uploaded, although it's untested as i don't have the device myself.
MTP is still broken, but that's upto xplodwild, again no device, so nothing i can do for that.

cdesai said:
Sound should with the build i just uploaded, although it's untested as i don't have the device myself.
MTP is still broken, but that's upto xplodwild, again no device, so nothing i can do for that.
Click to expand...
Click to collapse
No worries man, i'll just use Airdroid!

thx
Thx Team for starting another great rom on our tf300!

Downloading now. Can't wait to check it out. Thank you!

cdesai said:
SGT7 is the custom ROM by the guys who brought ICS/CM9 to the OG Galaxy Tab...
I plan on doing weekly builds on my personal pc, or when a big feature is released / something big is fixed (device specific), i'll try to release a new build
Click to expand...
Click to collapse
Welcome to the tf300 Kingdom Thank you for bringing this great development to us.

I guess I should've posted this on the first page lol but anyway...
Hey Folks! I have a YouTube Channel where I post ROM overviews for the LG G2x and the HTC Sensation. I recently bought me a TF300 and loving it so far! So I'll use this Post for my videos and I hope you like them!
Sent from my LG-P999 using xda premium

Just attempted to reinstall the new version and it won't get past the boot screen. Tried to wipe and install.

oo3 said:
Just attempted to reinstall the new version and it won't get past the boot screen. Tried to wipe and install.
Click to expand...
Click to collapse
Same here. Sitting on boot screen for 10 minutes now.

Same issue, sent logcat when bootloop occured to cdesai, waiting for fix now

oo3 said:
Just attempted to reinstall the new version and it won't get past the boot screen. Tried to wipe and install.
Click to expand...
Click to collapse
Natemz said:
Same here. Sitting on boot screen for 10 minutes now.
Click to expand...
Click to collapse
Shooshka said:
Same issue, sent logcat when bootloop occured to cdesai, waiting for fix now
Click to expand...
Click to collapse
Pretty sure it's the same error as a few other tablets, seems to be an upstream bug, will try fixing, and do a clean build later today (morning here)
Sorry for the trouble.
EDIT: rebuilt and reuploaded, should boot.

cdesai said:
Pretty sure it's the same error as a few other tablets, seems to be an upstream bug, will try fixing, and do a clean build later today (morning here)
Sorry for the trouble.
EDIT: rebuilt and reuploaded, should boot.
Click to expand...
Click to collapse
Confirm, now all good, flashed over cm9 ex2. Thanks!
UPD: Question - what difference between 1) Settings-->Performance (interactive, ondemand etc) and 2) Settings --> Extended Settings --> Cpu Settings --> Cpu Mode switch.
Who's "the boss" of these two?

The CPU in extended settings is "boss" if you set it lower you will see that the CPU never reaches 1500 even if you set it in performance
Sent from my EPAD using XDA Premium HD app

Shooshka said:
Confirm, now all good, flashed over cm9 ex2. Thanks!
UPD: Question - what difference between 1) Settings-->Performance (interactive, ondemand etc) and 2) Settings --> Extended Settings --> Cpu Settings --> Cpu Mode switch.
Who's "the boss" of these two?
Click to expand...
Click to collapse
Those settings (performance, interative, ondemand, conservative) rule how fast and when does the CPU goes up a notch. If you have it on performance you CPU will be at the highest stepping set by the CPU Settings (e.g. 1500mhz). Conservative takes more time to step up the CPU so you might see some lag there. The most used one is interactive, it steps up quickly when needed (for example, when running a game).
In summary, the CPU Settings say how high and low can the pad go, and the governos say how fast can the cpu power up the device to higher CPU speeds.

jgaf said:
In summary, the CPU Settings say how high and low can the pad go, and the governos say how fast can the cpu power up the device to higher CPU speeds.
Click to expand...
Click to collapse
Yep, I understand and know it, but then I don't understand why we need options in "Extended settings" if we can use any CPU control to do that.
And ok, I got answer - CPU Control is the "boss" and has higher priority)

Great ROM! Only issue so far is that system ui crashes when flipping the combined bar in tablet tweaks, have tried every other tweak and they work like a dream though!
Sent from my GT-I9000 using XDA Premium HD app

[DEV][ROM][JB 4.2.2][Unofficial] CM10.1.0 RC2 [30/05/2013]

CM 10.1.0 RC2 code base has been released and here it is for your flashing pleasure!
DISCLAIMER:
I am new to android development so more of a builder than a developer at the moment. So please do BACK UP your phone before you get started. If you know how to fix an issue in the ROM then feedback is more than appreciated. Bug reports are welcome, however please understand that I probably won't be able to figure out the solution without help. You can expect that CM code updates will be rolled into this ROM as these come out though.
For those of you looking for Skype audio this ROM does not yet fix it BUT I have tried the tinyalsa_audio stuff from Adam77Root and that does get Skype working just fine, but then it messes up your phone audio to where you don't hear anything or send anything out about 3/4 of the time. So we're getting close but not quite there yet... Oh and bluetooth calling was not fixed when skype worked, so there's something else wrong there...
RC1 was accidentally released with the tinyalsa_audio driver.. So this is RC2 with the "correct" libaudio which means skype is broken but calls work...
Using CWM:
1) BACK UP your current ROM!!!
2) Preform wipe / factory reset
3) Flash the ROM: cm-10.1-RC2-20130530-UNOFFICIAL-i927.zip (MD5 = 2e65e45bdc7539d5260062abdf6cd1cd) Mirror 1
4) Optionally flash GAPPS: gapps-jb-20130427-nonneon-tonyp.zip (MD5 = 13fc57e24ead77ec2613efd643af3800)
Stuff that I've noticed that looks to be fixed / has changed since M3:
- Moved over to KickAss kernel and battery life now totally rocks!
- Picture editing in the gallery is also working fine now.
- HDR photo capture looks to be working just fine also...
- Lock screen lag much less noticeable, but I do sometimes need to press the button twice...
Known issues without workarounds:
- Audio in skype is there but plays back at wrong rate (slower than normal, woman's voice sounds like a man's)
- I was not able to get my two bluetooth headsets working but bluetooth GPS works fine
Known issues with workarounds:
- GPS works great and fast but reports 0-2 satellites only, NMEA data stream seems to be incorrect, so parsing this data may be touchy in some apps
- Pictures taken by camera are shown rotated 90 degrees (then can be manually rotated within the gallery app)
Please don't report any of the above known issues. General CM 10.1 bug tracking thread <- Please check here before posting a bug report!
I'm sure there are others but I've not noticed them yet. I don't use a hands free but I can confirm the bluetooth does work with an external GPS for instance.
Change log:
20130530 - Corrected call audio issue and CM 10.1.0 RC2 code base
20130525 - Moved to KickAss kernel and CM 10.1.0 RC1 code base
20130503 - Fixed gallery pic editing, update OTA image
20130502 - Combined LiteKernel built 20130418, broke the gallery pic editing, added OTA support
20130417 - Combined LiteKernel built 20130414 into the ROM, no need to flash kernel seperately
20130416 - New LiteKernel build by bubor
20130415 - WiFi fix by bubor applied
20130412 - M3 code release, still using LiteKernel from 20130222
20130405 - Rolled back non-monthly code updates to revert this back to the original M2 code release. Corrected build environment to generate proper boot.img, No longer using the one from the LiteKernel which means that the LiteKernelManager is not messing around with settings now.
20130404 - Used the 2013/02/23 branch of the device tree and also re-synced with the CyanogenMod source. SD card mappings now match the CM10.1 later builds so recommend wiping and re-installing fresh for this one,
20130402 - Build LiteKernel into the ROM so no need to flash the kernel separately
Credits:
- KickButtowski for the kick ass KickAss kernel
- tonyp for the non-neon GAPPS package
- bubor: WiFi tether fix and new kernel that fixed data usage, image editing in galley and google now hotword detection as well as new GAPPS
- Adam77Root for the libaudio code that fixed the camera audio in video recordings
- yohan4ws for pointing me towards Adam77Root's libaudio stuff
- gtmaster303: CM 10.1 bug tracking thread maintenance
- The-Covenant team: For the device tree and vendor proprietary files
- dman3285: For the tutorial on building CM10 and CM10.1 from source, and all your work getting this setup
- thegreatergood: For the LiteKernel source and binary
If I've missed anyone apologies in advance and just let me know and credit will be added...
And here is the ling to my device tree should anyone want to follow along. Seperate branch available for the tinyalsa_audio for the more adventurous ones.

Reserved...

sweeeet!

wow, another rom i will try it tomorrow, juts 1 question, if i flash lite kernel the wifi will work? and how about ohter mods or skype?
I am gonna try it tomorrow, thanks thanks

Awesome, thanks!
Can you please list the non working things you have already discovered?

lorddavid said:
wow, another rom i will try it tomorrow, juts 1 question, if i flash lite kernel the wifi will work? and how about ohter mods or skype?
I am gonna try it tomorrow, thanks thanks
Click to expand...
Click to collapse
Correct - If you flash the LiteKernel on top of the ROM then the WiFi will work.

braintweaker said:
Awesome, thanks!
Can you please list the non working things you have already discovered?
Click to expand...
Click to collapse
Done...

This is pretty much just a new build with all the upstream commits, correct?
I suggest everyone review my bug tracker thread before posting bugs, as these builds are one in the same rom...
http://forum.xda-developers.com/showthread.php?p=38339702

gtmaster303 said:
This is pretty much just a new build with all the upstream commits, correct?
I suggest everyone review my bug tracker thread before posting bugs, as these builds are one in the same rom...
Click to expand...
Click to collapse
Agreed.
This build is based on:
- CM 10.1 M2 release code base (released 4 Mar 2013 so the Feb ROMs are based off the M1 release)
- The-Covenant device tree and proprietary files which I assume have not been touched since end of Feb
- thegreatergood's LiteKernel binary which is the same as the other ROMs
So any issues that were related to the kernel or device specific stuff will still be there, but CM based issues may have been resolved. Case in point the audio playback lag is now fixed on my phone.
YMMV of course!

I am doing right now a backup of my current rom. I really want to see if skype and magic jack works now. I will post back in some hours.

Is bluetooth handsfree fixed in this build?

Re: [DEV][ROM][JB 4.2.2][Unofficial] CM10.1-M2 3/31/2013
One question. Do i need to flash the keyboard fix? and the rom is compatiblr with the mod to put external sd as internal? i try to flash but never boot. I will try again in a few moment
Sent from my SGH-I927 using xda app-developers app

jzamoras said:
Is bluetooth handsfree fixed in this build?
Click to expand...
Click to collapse
In my test both headsets connected fine but one gave no sound and the other gave me only static. Not sure if the mic was working on either one. I don't usually use bluetooth so can't say for sure but I think this is still an issue on this build at this time unfortunately.

lorddavid said:
One question. Do i need to flash the keyboard fix? and the rom is compatiblr with the mod to put external sd as internal? i try to flash but never boot. I will try again in a few moment
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
You won't "need" to but the crashing keyboard gets annoying fast. So installation of a keyboard from the play store (I used the hacker's keyboard) is a must to make this usable. now if there is a "fix" available for the stock keyboard on the JB builds then let me know what it is and I'll see about adding it to the ROM by default.
As for the memory cards, the internal is mounted as /mnt/emmc and the external is mounted as /mnt/sdcard. Not sure if that answers your question...

spyke555 said:
In my test both headsets connected fine but one gave no sound and the other gave me only static. Not sure if the mic was working on either one. I don't usually use bluetooth so can't say for sure but I think this is still an issue on this build at this time unfortunately.
Click to expand...
Click to collapse
Is the same I got using AOKP. I guess I'll wait then.

spyke555 said:
You won't "need" to but the crashing keyboard gets annoying fast. So installation of a keyboard from the play store (I used the hacker's keyboard) is a must to make this usable. now if there is a "fix" available for the stock keyboard on the JB builds then let me know what it is and I'll see about adding it to the ROM by default.
As for the memory cards, the internal is mounted as /mnt/emmc and the external is mounted as /mnt/sdcard. Not sure if that answers your question...
Click to expand...
Click to collapse
I was talking about these patches http://forum.xda-developers.com/showthread.php?t=2067954
there is a patch for swap the external sd with the internal, and another for the keys in the keyboard.
Edit: i think that the keyboard patch no needed. But the Patch to swap the the external SD as internal, doesnt work. The rom never boot when i install it.
Another thing, its me, or the wifi is very very slow? i am downloading skype from the market and is taking so much.
Sorry if i wrote something bad :/

Just corrected the link to the LiteKernel, you may want to download this new link and re-apply to make sure you have the latest kernel installed. Trying to get this built into the ROM to avoid any further confusion...

Ok, i will try it again, but the skype/magicjack audio issue still exist

Just posted a new ROM build that now has the LiteKernel-20130222 built in. No need to flash separately. CM code is the same so no change there. If you already downloaded the 20130331 version and installed to 20130222 kernel then no need to re-download.
CM10.1-M3 release should be coming out shortly so do expect another update soon...

spyke555 said:
Just posted a new ROM build that now has the LiteKernel-20130222 built in. No need to flash separately. CM code is the same so no change there. If you already downloaded the 20130331 version and installed to 20130222 kernel then no need to re-download.
CM10.1-M3 release should be coming out shortly so do expect another update soon...
Click to expand...
Click to collapse
I'll jump as soon bluetooth thing is fixed

[ROM][UNOFFICIAL][4.4.4] CyanogenMod 11 + crDroid for Xiaomi MiPad

CyanogenMod 11 with crDroid additions for Xiaomi MiPad
!! IMPORTANT !!
xep.8800.org will be temporarely down from 29.03.15 for couple of weeks so it would be great if somebody do mirror of latest buld and post link here. Thx!
About:
Source built CM except proprietary blobs and binary kernel from stock MIUI rom.
This is not a port from another binary rom.
Click to expand...
Click to collapse
What's working:
It seems everything working for now..
Click to expand...
Click to collapse
Not working/Bugs:
"Wi-Fi region code" setting is broken. Do not touch it or it will break your wi-fi.
you tell me.. testing in progess..
Click to expand...
Click to collapse
Instructions:
1. Install CWM Recovery
2. Do Full Wipe If coming from another ROM
3. Flash ROM
4. Flash Google Apps (my recommendation is to install minipal gapps due to /system partition size limits)
5. Reboot
Click to expand...
Click to collapse
Multirom Instructions:
1. Install TWRP Multirom Recovery
2. Reboot into TWRP and install multirom-20150205-v30-UNOFFICIAL-mocha.zip
3. Click "Advanced->Multirom" and flash your desired second rom.
4. Return to the installed roms listing, click fresh installed rom and click "Remove boot.img" (Due to closed kernel sources kexec-hardboot is not implemented so we need to remove boot.img)
5. Reboot. Select your desired rom from multirom menu
Click to expand...
Click to collapse
Downloads:
cm-11-20150327-UNOFFICIAL-mocha.zip
CWM
Multirom:
TWRP_multirom-v2.8.4-mocha.zip
multirom-20150205-v30-UNOFFICIAL-mocha.zip
I don't know if it is actually compiled with TEGRA optimizations but have created CWM flashable zip with stock bionic libraries. You can flash it on top of CM installation:
tegra_bionic.zip
Changelog:
15.02.15
* apply qcom bionic optimization
* build.prop dalvik etc tweaks
02.02.15
* Reboot to recovery fixed
* Recents view proportion fixed
26.01.15
* Synced with CM repo
* have enabled Display mirroring (miracast) though it does not work with my EZ dongle, sound is ok but screen is black. May be it'll work with another dongles...
21.01.15
* Update to the latest kernel from stock MIUI
20.01.15
* Sleep issue fixed
* Adopt nvcplsvc for CM & implement Performance Profile selection
18.01.15
* Synced up with CM repo.
* Added USB Mass Storage mode for external sd. Though it does not work along with ADB Debug enabled, need to be switched off when using UMS mode.
17.01.15
* Switch to CM's audio_effects and make Dirac plugin work. Equalizer crash fixed.
Click to expand...
Click to collapse
Links:
http://github.com/cyanogenmod
http://github.com/cristianomatos
https://github.com/faust93
Click to expand...
Click to collapse
I take no responsibility for what this may or may not do to your device.
Do not forget to click Donate button! It makes me work harder!

Thanks Pumbaster for your work!

My device doesn't seem to go to sleep...
WakeLockDetector shows Android System --> ConnectivityService as the main issue. BetterBatteryStats shows the same...
I tried turning location services off, froze Mobile Data and Mobile Network Configuration in Titanium Backup but that doesn't help. No checking if the same wakelock appears with wifi off...
Anyone with any clue? Or the same problem?

Will check the ROM and tell you dagrim.
But first thing first, I have to install it. And I have 2 questions, to avoid screwing things.
- Does it works with TWRP instead of CWM?
- Is there a reason to have a June version of minimal gapps where a version of December exist?
Thanks to everyone in the process (romers, informers, helpers)

Krystanos said:
Will check the ROM and tell you dagrim.
But first thing first, I have to install it. And I have 2 questions, to avoid screwing things.
- Does it works with TWRP instead of CWM?
- Is there a reason to have a June version of minimal gapps where a version of December exist?
Thanks to everyone in the process (romers, informers, helpers)
Click to expand...
Click to collapse
I used pico gapps myself and the june version is way smaller then the december version, then again I actually did try the december version as well and it seemed to work fine. So not sure, apart from the size...
About TWRP vs CWM, not sure. Guess it also should work with TWRP but haven't tried... CWM is needed for True Dual Boot, but that seems bugged anyway.

By me too. Battery drain is to much, device don't go to sleep...

zolikaDB said:
By me too. Battery drain is to much, device don't go to sleep...
Click to expand...
Click to collapse
Yeah, seems to be a common issue.
My device only goes to sleep when wifi is turned completely off. When I have it set to turn off when display is off I still get the wakelocks. I also have set the scanning for open wifi to off, location services turned off, etc.
For now I flashed back to the 0114 version as that one is working fine here...
If I can share some logs or anything, I'd be more then happy to!

@dagrim1: I hope, Pumbaster make new, fixed build

I Encounter Graphical Glitches with 3rd Party Browsers (Opera and UC Browser)
Chrome works fine so far. Also heavy Battery drain an 17/1

@faust93: what is with battery drain?

Did a very dirty try or replacing frameworks.jar but that didn't work...
Saw some wifiStateTracker errors and that and ConnectivityService seemed to be part of the framework, that's why I gave it a shot. 0118 still has the deespleep/wakelock issue btw...

I don't really care about dual boot. MIUI has so much limits. Once I go to CM, I don't think I'll be able to come back to MIUI...
But I'll stick to CWM, just in case...

I just tried the wpa_supplicant.bin file posted by pumbaster on 4pda and it seems to solve the deepsleep issues!
Post 351 of the custom mipad 4.4.4. rom thread there...
http://xep.8800.org/mipad/wpa_supplicant.bin
Place in system/bin and set permissions to rwxr-xr-x
@faust93: I hope you don't mind me posting this here but I saw you posted links to the same location in the topic start, if so my apologies and I will remove it asap (but I am going to sleep now, so won't be up until next morning...)
Also had some iussues with stuttering video playback, but setting 'disable hardware overlay' in developer settings fixed that for now...
Thanks for the awesome work!

dagrim1 said:
I just tried the wpa_supplicant.bin file posted by pumbaster on 4pda and it seems to solve the deepsleep issues!
Post 351 of the custom mipad 4.4.4. rom thread there...
http://xep.8800.org/mipad/wpa_supplicant.bin
Place in system/bin and set permissions to rwxr-xr-x
@faust93: I hope you don't mind me posting this here but I saw you posted links to the same location in the topic start, if so my apologies and I will remove it asap (but I am going to sleep now, so won't be up until next morning...)
Also had some iussues with stuttering video playback, but setting 'disable hardware overlay' in developer settings fixed that for now...
Thanks for the awesome work!
Click to expand...
Click to collapse
Is this bin file integrated in 2015.01.18 build? What do you know about this ROM? Did you test it?

zolikaDB said:
Is this bin file integrated in 2015.01.18 build? What do you know about this ROM? Did you test it?
Click to expand...
Click to collapse
I don't believe it's integrated in 0118, think that fixes some sd stuff...
I am currently running the 0118 build (with the wpa_supplicant.bin file replaced manually) and seems to be working pretty fine. Had some video issues with a certain app (video jumping a bit, stuttering) but think I fixed that with 'disable hardware overlay' in developer options.
Without the replaced .bin I also had a problem with turning off and on wifi. It would work when booting, but if I turned it off I couldn't turn it on again... The replaced .bin also fixes that. Now checking if antutu finishes it's run...

@dagrim1: hope, Pumbaster fix this problem!

Just another small question: full wipe will delete the /data partition too right ? So the ROM zip file will be deleted too ? Or am I missing something ?
Thanks.

I tried to install with TWRP and when I reboot, I get to MIUI v6 so I guess it rebooted in the wrong system.

jastonas said:
I tried to install with TWRP and when I reboot, I get to MIUI v6 so I guess it rebooted in the wrong system.
Click to expand...
Click to collapse
Unfortunately I tried to install CWM with fastboot and it failed to install... No specific error message.
I have seen a port of TWRP for MiPad. Have you tried this one, or the standard one?

How I wish I could just flash CM on my MiPad...