Related
Do any of you guys and gals know of an aftermarket cable that will work with the captivate. I lost the original one that came with the phone. Have since bought two different chargers, one from the att store (zero charger), and they charge the phone but don't put it on USB mode like the original one did when I plug it to a laptop.
Sent from my rooted Cappy.
All you need is a standard MicroUSB to USB cable. Make sure it's a standard cable, and not a "charge only" cable though.
A bit of advise, generally if you buy a cable that isn't a Samsung USB cable, you're going to have to take a razor blade to your new cable and cut away some of the rubber around the MicroUSB plug. You'll see that untrimmed, you might have a hard time getting the cable secured in the phone's port.
Thanks man. I actually just noticed the "charging only cable" written on the tag on the cable. Now I know what to look for. And you're right, the one I bought from a gas station was always popping out. The one from att fits like a glove though.
Sent from my rooted Cappy.
All it takes is a razor blade or something similar, and a few seconds. I use a bunch of generic USB cables which all have fat plug heads. Trimming a little of the rubber off and they all work perfect.
Weird, for some reason my original cable from ATT now is really loose, I have to like set the phone down a certain way to keep it charging/plugged in.
The only cables that now do fit snuggly are the ones from my external mini hard drives with the fat head, haha, I wonder why...my captivate still looks normal, can't figure it out.
I guess I should see if my normal cable fits with my externals or falls out of those too, if so it would be the cable. But it seems weird that the fat headed cables fit snuggly with my captivate, so that makes me think maybe its the captivate.
long winded stupid post, sorry.
i bought a blackberry cable from best buy... data and charging... 16 bucks. but when ever your puppy ate your data cable in the middle of the night and you're phone is at 30% battery, ya tend to pay for it...
Inexpensive replacement OEM Charger + USB Cable for Captivate SGH-i897!
4got2g0 said:
Do any of you guys and gals know of an aftermarket cable that will work with the captivate. I lost the original one that came with the phone. Have since bought two different chargers, one from the att store (zero charger), and they charge the phone but don't put it on USB mode like the original one did when I plug it to a laptop.
Sent from my rooted Cappy.
Click to expand...
Click to collapse
Check out www all4cellular DOT com
They have the OEM Samsung Captivate (U.S./Edison) Wall Charger and USB Charging+Data Cable for $6.95 + $2 Shipping.
The item number is "eta0u60jbe". But this item # includes BOTH the USB Wall Charger (# ETA0U60JBE) AND the USB-to-Micro USB data/charging Cable (# ECC1DU2BBE)!
I bought two of these and they are EXACTLY like the original Charger and ~5ft. USB Cable that comes with the Captivate. They are OEM/Samsung-branded and labeled and are not Chinese-made knock-offs. I am in SoCal and received them within a few days of ordering.
Here's a direct link:
www DOT all4cellular DOT com / samsung-eta0u60jbe-wall-charger DOT html
Hope this helps!
Billy B.
^^^ spam!!!
monoprice .com is better!
foofiebeast said:
Weird, for some reason my original cable from ATT now is really loose, I have to like set the phone down a certain way to keep it charging/plugged in.
The only cables that now do fit snuggly are the ones from my external mini hard drives with the fat head, haha, I wonder why...my captivate still looks normal, can't figure it out.
I guess I should see if my normal cable fits with my externals or falls out of those too, if so it would be the cable. But it seems weird that the fat headed cables fit snuggly with my captivate, so that makes me think maybe its the captivate.
long winded stupid post, sorry.
Click to expand...
Click to collapse
I had similar issues, till I realized that the problem was with the sliding door for the microUSB port - make sure it is pushed all the way back (you may hear a click) - its only then that all my MicroUSB cables fit w/out any modifications to them.
as always YMMV.
hope that helps
I second the Monoprice.com recommendation. I buy ALL my cables there. The heads on their micro USB cables are too large to plug into the Captivate unmodified, but I used a Dremel to fix that.
Both of my Monoprice cables are going strong, in contrast with my OEM cable, which started out excellent, but is now so loose as to not maintain a connection unless the phone and cable are precisely arranged.
Sent from my SAMSUNG-SGH-I897 using XDA App
4got2g0 said:
Thanks man. I actually just noticed the "charging only cable" written on the tag on the cable. Now I know what to look for. And you're right, the one I bought from a gas station was always popping out. The one from att fits like a glove though.
Sent from my rooted Cappy.
Click to expand...
Click to collapse
cant hyperlink yet. I ordered 2 of these, they are good and from samsung. on sale at the moment
amazon.com/Samsung-Replacement-Charging-SPH-M330-SCH-R100/dp/B001XXUOQI/ref=sr_1_1?ie=UTF8&qid=1293013918&sr=8-1
USB cables always wear out eventually especially as much as we use them. i just accidentally bought the crappy charge only one now i need to go get a data one
Samsung Captivate Data Cable
Hey Guys,
What You Need Is Samsung AT&A Captivate Data Cable?
lee_bruice said:
Hey Guys,
What You Need Is Samsung AT&A Captivate Data Cable?
Click to expand...
Click to collapse
That is indeed the one he needs.
I Am Grad That Is Useful.
Happy New Year!!!
tchan012 said:
I had similar issues, till I realized that the problem was with the sliding door for the microUSB port - make sure it is pushed all the way back (you may hear a click) - its only then that all my MicroUSB cables fit w/out any modifications to them.
as always YMMV.
hope that helps
Click to expand...
Click to collapse
I have the same problem with the original cable not fitting snug. Yes, the door is open all the way...until the click. I'm just glad to know I'm not the only one have the problem. Been doing it since day 1. I'm afraid to cut any bit of it off since its already slimmed down and there isn't much left to cut
Jmurph3 said:
I have the same problem with the original cable not fitting snug. Yes, the door is open all the way...until the click. I'm just glad to know I'm not the only one have the problem. Been doing it since day 1. I'm afraid to cut any bit of it off since its already slimmed down and there isn't much left to cut
Click to expand...
Click to collapse
Also having this issue. I wonder if Samsung has revised them since I bought mine on launch day.
jayrod88 said:
Also having this issue. I wonder if Samsung has revised them since I bought mine on launch day.
Click to expand...
Click to collapse
I have a 1009 model. Assuming that means it was manufactured Sept,2010. Now to find a microUSB
We have some micro USB 5' Cables coming in Monday. If they are like the sample they not only fit the Captivate properly, but when plugged into our new Car Plug ->USB (2100mA) adapter, my Captivate shows "Charging (AC) ".
We originally brought in the Hi-Power USB car adapter so iPad & Tablet customers could both run & charge at the same time. We have had enough request from customers looking to use it with Smart Phones, that I had to find the best matching cable.
Sent from my Samsung Captivate with Perception 10.2, Firebird2 v0.4 #49 Kernel, Firmware 2.2.1, Modem T959TLJL3 using XDA App
Monoprice...ALWAYS!!
As mentioned, get your cables from monoprice. I mean, you just can't beat a usb cable for $2. If it needs trimmed, I usually just use a razor knife/box cutter to remove the bulk, and it works perfectly. I actually had to order a 25ft. VGA cable from them a couple of days ago...$8. Seriously. Definitely the cheapest place I've seen to buy cables.
I was browsing around on ebay and found a multimedia dock for our beloved TB's. Its deff not the highest quality dock i have ever seen, but it looks like a viable replacement until Verizon or HTCpedia release the official one. It doesnt look like it is slanted slightly to have a nice viewing angle but still its $30...the one from Verizon is $60. Let me know what you guys think.
http://cgi.ebay.com/USB-Sync-Battery-Charger-Cradle-HTC-Thunderbolt-4G-/380333733043?pt=PDA_Accessories&hash=item588da834b3
That one has been available for a little while now. There is a thread where someone has a link for it cheaper also. I'm holding out for the Verizon one.
I would avoid this one, I purchased one from amazon and returned it the same day. The viewing angle is horrible, it is difficult to put in and take off (almost dropped my TB taking it off), and worst part about it, It did not charge the phone. All the lights worked on it, but would not produce a charge. I will wait for the verizon one if it ever comes out.
halopower said:
I would avoid this one, I purchased one from amazon and returned it the same day. The viewing angle is horrible, it is difficult to put in and take off (almost dropped my TB taking it off), and worst part about it, It did not charge the phone. All the lights worked on it, but would not produce a charge. I will wait for the verizon one if it ever comes out.
Click to expand...
Click to collapse
aw really? i wanted to get this only for charging purposes but whats the point if it doesnt charge
Bah, Noob with first smartphone here! I failed to read any replies, and jumped at the deal, and even ordered the silicon soft case from the same guy.
I want to plug the phone into my Roku box's USB to show videos and pictures I took on the phone. I went to the Verizon store and they said that their multimedia cradles would be available soon, but so far 3 weeks have past and no cradle.
Well, I guess I could fix it if it don't work, I just hope that the extended battery fits.
I bought the soft case to see if I could cut out the extended battery hump easily with a laser engraver.
Misleading title, please change.
Hmm... I've been wanting a cradle for awhile now. So I jumped on this offer, and like any good online buyer, I look for reviews on the product AFTER I buy it. Can you guys confirm that this won't charge the phone? I was just looking for something to hold the phone up while I use WiFi keyboard. :/
http://www.amazon.com/gp/product/B004JX1FOY?tag=5336653508-20
OK I have this dock but I knew going in what it was going to be about so I can give you an idea of what you're getting.
The dock has two connectors on it. One is a USB cable (removable) and one is an A/C plug. The A/C plug is there ONLY to charge the second battery and does not charge the bolt when plugged into the dock. It WILL charge the extended battery (the OEM extended batt does fit in the spare battery slot) but not when it's actually on the Bolt. You can't fit the Bolt in the dock with anything other than the stock battery on it.
The USB cable plugs from the dock into (duh) a USB port on your PC. When it's plugged into the USB port the Bolt does detect the connection and I have been able to charge the Bolt this way. I've also been able to mount the SD card this way to move files and stuff. It doesn't charge as fast being USB vs wall charger but it does charge it. I'm looking at it right now and it just charged it to 100 percent.
The USB cable will not plug directly into the Bolt. It's Mini USB and not Micro USB. Another issue is that you can forget leaving the Bolt in a case and putting it on this dock. It will not fit with any case that I've seen. As was previously mentioned the viewing angle is a bit harsh (it's not angled.) It's basically a straight up and down mount so unless you're putting the dock somewhere at least at eye level it's not as easy to view.
This dock also has NO HDMI port on it. I have mine at work because I don't need the HDMI here. I'm going to get the OEM dock for home use since it's expected to have the HDMI out.
So to summarize it does charge the Bolt's stock battery in the dock as well as the extended in the spare battery slot. You can use the USB functions while plugged into the dock. I'm streaming Pandora right now while docked. The viewing angle is a bit harsh when the dock sits below eye level. The Bolt charges over USB with this dock. The spare battery will only charge via the attached A/C plug. You can't charge it in a case. The USB cable (removable) is mini USB NOT Micro USB and there is no HDMI.
Hope this helps.
ETA: I should add that you could use one of those USB to A/C adapters and plug the USB cable from the dock into A/C and charge that way (if you just wanted a faster charging solution.) I have tested it and it does charge that way.
Many thanks Cubs2008 ! This is exactly what I was looking for. I feel bad that I bought the dock on Ebay for $27 when I could have gotten it on Amazon for less, but lesson learned. Glad to know that I can charge the phone and the battery! Now to figure out the viewing angle problem (post it notes under the front end?). lol.
BigMcGuire said:
Many thanks Cubs2008 ! This is exactly what I was looking for. I feel bad that I bought the dock on Ebay for $27 when I could have gotten it on Amazon for less, but lesson learned. Glad to know that I can charge the phone and the battery! Now to figure out the viewing angle problem (post it notes under the front end?). lol.
Click to expand...
Click to collapse
I paid even more ($34 I think) but it does what I need it to for now. If I needed HDMI at work I'd have waited but no point in that.
As for the viewing angle it's really not too bad if you can raise the dock more to your eye level. It does wiggle a little bit left to right in the dock (but very little.) You could put it on a book or something that would raise it up and it's fine. I sit pretty low at my desk in my chair so it's not nearly as much of an issue for me (and it's not quite at eye level.)
There is one more thing I forgot to add...someone mentioned getting it in and out of the dock being a pain and I totally agree. It's due to the fact that it basically sits almost upright in the dock. There are times where I've gotten frustrated just trying to get it in or out of there. It's because I always think of angling it into the dock rather than going straight down with it. When I do drop it straight in it usually slides right in with no issue. However I also have a Zagg max coverage shield on my Bolt so I may have more of an issue because of that.
Good luck!
Thanks for the information, Cubs2008! Very much appreciated.
Wish I had a contact at a factory in China... probably wouldn't be very difficult to produce a better quality desktop dock at a competitive price!
pdxdon said:
Thanks for the information, Cubs2008! Very much appreciated.
Wish I had a contact at a factory in China... probably wouldn't be very difficult to produce a better quality desktop dock at a competitive price!
Click to expand...
Click to collapse
No kidding! If they would've angled the dock in front just a little bit and added an HDMI port this thing would've slayed the OEM dock. It still does a lot on its own IMO and we probably would've seen the dock for $60+ instead of around $30.
I'll still get the OEM dock when it comes out but this one does do what I need it to at work. Yay.
Cubs2008 said:
No kidding! If they would've angled the dock in front just a little bit and added an HDMI port this thing would've slayed the OEM dock. It still does a lot on its own IMO and we probably would've seen the dock for $60+ instead of around $30.
I'll still get the OEM dock when it comes out but this one does do what I need it to at work. Yay.
Click to expand...
Click to collapse
they can't just add an HDMI port just like that. if they could we already would see a post on here about a hdmi cable.
The dock arrived today...
Here is the lowdown after disassembling it:
It looks to be assembled by children with a hot glue gun and old fashioned soldering gun. There is gobs of hot glue used to hold in the 2 LED's. One is an insanely bright blue led, and the other, untested and discarded, is a bi-color led.
There are 2 completely isolated circuits inside, one being a simple micro-USB connector on a cable that is hot glued in place, with the blue LED tapped off the 5V from the USB. I could not find any resistor inline with the LED, so it's lifespan is questionable at best.
The second circuit is the battery charger board held in place with 1 screw at one end, and the mini-USB socket at the other. It has wires to the bi-color LED. This is powered by a 5V 1A wall wart. It does not supply any power to the USB that connects to the phone
The LED's have their full length of lead wire in tact, with over-sized shrink tubing loosely covering them, and all that excess lead wire is sticking out of the hot glue like cat whiskers.
In effect it electrically comparable to a $5 battery charger, and a separate $1 USB to micro-USB cable, nothing more.
There is no media functions whatsoever. It is difficult and time consuming to plug the phone into the cradle, and you cannot use it with the extended battery or any type of case.
Advice: pass! Use your easier to plug in HTC USB cable, and if you want a separate battery charger, get another brand.
lippstuh said:
they can't just add an HDMI port just like that. if they could we already would see a post on here about a hdmi cable.
Click to expand...
Click to collapse
They probably could've when they manufactured it.
wow, Cubs2008 thanx for the indepth info!
I wanted to add to the topic that you can actually stand the entire dock upright with the Bolt plugged in and the extended battery in there and it will stay standing up. I'd advise placing the battery and the Bolt in it landscape and then pick the entire dock up and it will stand up. I've used it this way with no ill effects.
I work for vzw and the Samsung charge and thunderbolt have a charging dock that not only charges, but comes with an extra battery that charges in the dock itself. Should be released very soon.
4Geezy ON DopeDiculous's ROOTED TBeezy!
dopediculous said:
I work for vzw and the Samsung charge and thunderbolt have a charging dock that not only charges, but comes with an extra battery that charges in the dock itself. Should be released very soon.
Click to expand...
Click to collapse
How soon is "very soon" then?
They are now listed available to order and will ship in three days, 1/23.
http://www.mycellworld.com/Samsung-OEM-Multimedia-Desktop-Dock-P182792877-P93055.htm
http://www.mycellworld.com/Samsung-OEM-Vehicle-Navigation-Mount-P182792874-P93056.htm
They both only list compatibility with the i515 so I wonder if they will work all the same with the i9250.
The car dock (second link) is the same one that's been on Samsung's website for a while:
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-K1F8BEGSTA
It DOES NOT have the pins for use on the side of the Nexus.
I'm looking for one that does have the pins so I don't have to unplug everything when I want to take the phone in and out of the dock.
The description for the car dock says you can plug your car charger directly to the mount. I'm so confused. I just want the pins...
Honestly I'd be happy just to use the desktop dock in my car. Double sided Velcro and stick it right to my dash. It's what I do with the car dock anyways (using the disk thing it comes with) and there's no annoying suction cup to worry about when the temperature drops. Plus it's lower profile and much easier to drop the phone in and out of. Especially when the suction doesn't want to play along.
I posted this mainly because I hadn't seen the multimedia dock available yet anywhere else, I just included the car dock link in case someone wanted both.
Seriously? $64.95 for a piece of plastic with USB headphone jacks wired to the prongs. Did Samsung subcontract this out to Monster Cables? Nice to be able to insert/remove phone wihout plugging/unplugging, but pricing is obscene.
Yes I made a thread asking about this about a week ago about a 3 pin charging cradle. Its finally coming out! .....and then I seen the price of the damn thing -.-
DOS_Vader said:
Seriously? $64.95 for a piece of plastic with USB headphone jacks wired to the prongs. Did Samsung subcontract this out to Monster Cables? Nice to be able to insert/remove phone wihout plugging/unplugging, but pricing is obscene.
Click to expand...
Click to collapse
That is exactly the same thing I first noticed. As much as I want a dock for my phone there is no way I am going to spend 65 bucks on it plus another 10 dollars or so on shipping the stupid thing to me.
but does the official pogo pin car dock support VZW models?
i don't think it was made for the vzw models.
predation said:
but does the official pogo pin car dock support VZW models?
i don't think it was made for the vzw models.
Click to expand...
Click to collapse
Samsung® (OEM) Multimedia Desktop Dock For Verizon Samsung GALAXY Nexus SCH-I515,Verizon Google GALAXY Nexus SCH-I515
It only lists the VZW model, the GSM one isn't mentioned.
spencer88 said:
The car dock (second link) is the same one that's been on Samsung's website for a while:
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-K1F8BEGSTA
It DOES NOT have the pins for use on the side of the Nexus.
I'm looking for one that does have the pins so I don't have to unplug everything when I want to take the phone in and out of the dock.
Click to expand...
Click to collapse
and why would you say its the old crappy version? just the price? the picture and discrption are of the good one. part number is even different although that could be their internal cataloging number. still no evidence of this being the old verizon model.
as for the price on the desktop dock, i'm assuming it has to do with the internals. has an hdmi output while only physicly connecting to the phone via 3-prong connector. supposedly the car dock sends audio to the mount via bluetooth and the mount is able to give you the aux output line from there. wondering if it is sending data to the home version the same way.
Well I know its no iPhone 4s in terms of volume, but how hard would it be to be for an aftermarket company to make a car cradle that works with pogo connectors? All you have to do is have raised spring loaded prongs so that it would work with a tpu case.
Sent from my Galaxy Nexus using xda premium
Changed to 1/30 ...I think they are just throwing out dates
Sent from my Galaxy Nexus using xda premium
Updates?
Thanks.
this looks exciting. Been waiting for these for a while.
Sent from my Galaxy Nexus using XDA App
Desktop dock is pretty awesome, but a little too pricey. Nice find
The description of the desk dock looks pretty off. That thing DOES NOT have an HDMI port unless it comes with an extra wire to hook into the micro USB port. Take a look here for all the official dock options which may or may not arrive. http://www.droid-life.com/2011/12/02/samsung-galaxy-nexus-docks-and-chargers-get-a-proper-fondling-prongs-put-to-use/#more-54594
k20igor said:
Desktop dock is pretty awesome, but a little too pricey. Nice find
Click to expand...
Click to collapse
Try to find two DV casette cases and make this: http://imgur.com/a/wruWi#0 I'm going to add in Micro USB to HDMI® MHL Adapter soon to the bottom case and boom you've got yourself a media dock for less than $12.
guys did you think about one issue,that power button is at the same side as 3 gold pins ?? so inserted without root it would be pretty useless
Delarock said:
guys did you think about one issue,that power button is at the same side as 3 gold pins ?? so inserted without root it would be pretty useless
Click to expand...
Click to collapse
I never used the power button on my Nexus S when it was docked.
Hi All,
I was searching for USB Dock for Note and found THIS on eBay.
for only $6.78 + Free Shipping :laugh:
I saw many of THE SAME docks going for $19.99 - $24.99 on eBay and Amazon,So this is definitely a good Deal IMO.
One Another Good thing is Economy International Shipping is also cheap on this.
only $1.99 to INDIA in my case. So gifted one to my buddy!!!
I dont know if I plug in MHL cable in back and use it as HDMI Dock
That would be awesome
-----------------------------------------------What Works and What Dose not------------------------------------------------
1. MHL Cable : NO (You can not connect MHL cable behind the Dock to do HDMI out )
2. Data X'fer : YES (You can simply attach your data cable to Computer to Transfer files to/from Phone)
3. USB OTG : ??? (Dont know why anybody would do this but i will check it tonight see if it works!)
Click to expand...
Click to collapse
Thnx.
I ordered one of these to station on my bedside cabinet, so my note would act as a nice alarm clock. The unit is reasonably solid, but feels a little unstable out of the box (it wants to tip over backwards if placed on a less than solid surface, e.g. carpet)). However, once you plug your power cable into it this seems to help with the stability due to the location of the socket.
The unit itself has a very subtle light on the top, like a thin white crescent, to show when the unit is powered, and the contour of the aperture fits the Note's body perfectly. In fact, it holds it incredibly tightly, so I have no risk of accidentally knocking the note out of the cradle during a particularly robust "bedroom gymnastics" session with Mrs RTR, if you get my drift.
All in all, I'm more than happy with mine.
I tried a few different docks, but ultimately decided to go dock-free, simply because these docks are pretty much only usable with the Note naked, whereas I prefer leaving my Note in its case 24-7.
RobTheRover said:
I ordered one of these to station on my bedside cabinet, so my note would act as a nice alarm clock. The unit is reasonably solid, but feels a little unstable out of the box (it wants to tip over backwards if placed on a less than solid surface, e.g. carpet)). However, once you plug your power cable into it this seems to help with the stability due to the location of the socket.
The unit itself has a very subtle light on the top, like a thin white crescent, to show when the unit is powered, and the contour of the aperture fits the Note's body perfectly. In fact, it holds it incredibly tightly, so I have no risk of accidentally knocking the note out of the cradle during a particularly robust "bedroom gymnastics" session with Mrs RTR, if you get my drift.
All in all, I'm more than happy with mine.
Click to expand...
Click to collapse
Cool bro.
Thnx for the input.
I bought two for me and was wondering if they any good. Dose it do HDMI our if connected to charger via MHL ?
Sent from my GT-N7000 using Tapatalk 2
heavyharmonies said:
I tried a few different docks, but ultimately decided to go dock-free, simply because these docks are pretty much only usable with the Note naked, whereas I prefer leaving my Note in its case 24-7.
Click to expand...
Click to collapse
I don't blame you.
But I almost never use any phone with cases. I sure buy couple but like after week or two stop using them.They make them phones thick.
But I recently dropped my note , and it has scratch/ding . So back to case till the dock arrives.
Sent from my GT-N7000 using Tapatalk 2
There are some docks now appearing which have removable rubber inserts which claim to accommodate the Note with a Gel/TPU case, e.g.
http://www.ebay.co.uk/itm/Desktop-C...-Samsung-Galaxy-Note-i9220-AC32-/170817592805
Anybody tried one?
Thanks.
BTW I offered the seller 5.99 ea. for two,he gave me $6.49 for TWO.
So try offering him lower price. not a huge saving but hey dosent hurt to try!
Can we connect MHL cable to this dock? that would be really great!
ravi_buz said:
Can we connect MHL cable to this dock? that would be really great!
Click to expand...
Click to collapse
i was wondering the same thing.
mine will be here probably on Monday.
and first thing i will do is see if MHL cable and charging both works!
chils41 said:
i was wondering the same thing.
mine will be here probably on Monday.
and first thing i will do is see if MHL cable and charging both works!
Click to expand...
Click to collapse
Please let me know. Waiting for it
Sent from my GT-N7000 using xda app-developers app
Ordered this one on Dealextreme which seems to be the same as OP:
http://www.dealextreme.com/p/chargi...amsung-galaxy-note-i9220-black-116276?item=10
Great dock, stable, nice looking, I'm loving it
Looks like .. let us know your review once you get it and i will give it a thought .. (am also in India)
Just read the description on the eBay page and looks like it ships only with the cradle and no cable included ...
MHL dont work!
Well apparently, this dock is only good for charging / desk clock only.
you can not use MHL cable behind the dock and HDMI out.
It doses charges via MHL cable but dose not do HDMI out.
I know tht part sucks the most, but that is what it is.
Bingoig11 said:
Ordered this one on Dealextreme which seems to be the same as OP:
http://www.dealextreme.com/p/chargi...amsung-galaxy-note-i9220-black-116276?item=10
Great dock, stable, nice looking, I'm loving it
Click to expand...
Click to collapse
I have the same one from deal extreme. The dock was a little snug at first, but has loosened to a great fit. I've been using my phone as an alarm clock for a long time now and I can finally see the dang thing without picking it up now. Only thing I wish it had was a home button on the base so I could wake the phone without pushing it back. Overall I'm very happy for $12 shipped.
i like it, but can't buy, because i'm living in vn, so......
Sent from my GT-N7000 using xda app-developers app
chils41 said:
Well apparently, this dock is only good for charging / desk clock only.
you can not use MHL cable behind the dock and HDMI out.
It doses charges via MHL cable but dose not do HDMI out.
I know tht part sucks the most, but that is what it is.
Click to expand...
Click to collapse
Can you connect it to a computer and transfer files? TIA
ng93 said:
Can you connect it to a computer and transfer files? TIA
Click to expand...
Click to collapse
I have to check on that.
I dont think it will work either.
But I will see what it does!
I got this from
http://list.qoo10.com.sg/item/PLANET-DOCK-CRADLE-FOR-GALAXY-NOTE/405156094
Charging and file transfer only. But a little wobbly as the base is too small.
Sorry for the quality of the picture.
I bought a slightly better one... should arrive in ~2 weeks.
I'll post my impressions here
sean_siew said:
I got this from
http://list.qoo10.com.sg/item/PLANET-DOCK-CRADLE-FOR-GALAXY-NOTE/405156094
Charging and file transfer only. But a little wobbly as the base is too small.
Sorry for the quality of the picture.
Click to expand...
Click to collapse
hmm..dock looks big enough for Notes with cases..tried adding a case and charge?
I'm searching for an Active Car Holder (Cradle / Dock) for the ACRO S.
with the DK200 Charger Cradle Dock it is easy to Charge the Acro at home.
So do I stick the DK200 into the car. or there is a better possibility.
I would need exactly the same. Only problem is that the desktop cradle holds the phone vertically, but I need it on my dashboard horizontally. For watching TED, navigation, etc.
Options I found so far:
- buy another desktop cradle ($10 on ebay), cut it into two and modify it so the connectors come out from the bottom --> would be ugly I am afraid
- buy a cradle for another phone from KIDIGI , and try to push Acro S into that. For example Xperia S or HTC Incredible has very similar sizes, but I cannot test if it fits unless I buy one... and then I would need to hack it as well to put the connector pins to the bottom
I don't like either options... if anyone would have any other ideas, please let me know
wappali said:
I would need exactly the same. Only problem is that the desktop cradle holds the phone vertically, but I need it on my dashboard horizontally. For watching TED, navigation, etc.
Options I found so far:
- buy another desktop cradle ($10 on ebay), cut it into two and modify it so the connectors come out from the bottom --> would be ugly I am afraid
- buy a cradle for another phone from KIDIGI , and try to push Acro S into that. For example Xperia S or HTC Incredible has very similar sizes, but I cannot test if it fits unless I buy one... and then I would need to hack it as well to put the connector pins to the bottom
I don't like either options... if anyone would have any other ideas, please let me know
Click to expand...
Click to collapse
Sorry for being out of topic, but for the cradle, do we just pull out the phone, cause it seems like I am going to break either one every time I do it.
I built my own active cradle ...
I bought a cheap hard case from ebay and I modified it so the phone will get in and out easy, then I glued on it some springs for the power connections and I also installed a micro-usb port so I can use any regular car charger with a micro-usb connector.
I also attached to it a suction cup with a multi-angle orientation leg.
I used epoxi resin to put everything together and the final device is extremely functional. I still have to build a case around the springs and micro-usb connector in order to have it "like from the factory".
I'll attach some photos tomorrow (currently the holder is in the car and outside is raining ... not to mention is midnight here )
yeah please please photos - can not sleep before
The photos, as promised
As I already said, is still work in progress (regarding the finishing of the case around the springs and the microusb port) but it is 100% functional.
VERY GREAT WORK :good:
From which Telephone is the cheap hard case?
Which Material are the springs?
This is the exact case I bought (but you can find even cheaper): http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300795656907
As for the springs, those are from a battery holder. you can use even the spring from a mechanical pen.
ro_explorer said:
As I already said, is still work in progress (regarding the finishing of the case around the springs and the microusb port) but it is 100% functional.
Click to expand...
Click to collapse
Nice! Would like to mimic that.
I have a USB cable wih plug that I could glew to the back of a cradle, like you did. But what wires from the cable should be connected to the phone? And also, does anyone have any thoughts on the voltage and current that the Acro S expects on that connection? Regular USB values or a bit more?
Frank
Good
Very great work
I know the stock charger is 5v 1.5amp
Sean
what about this car holder: http://www.ebay.ie/itm/Windscreen-C...0325?pt=UK_Holders_Mounts&hash=item2574212985
veimus said:
what about this car holder: http://www.ebay.ie/itm/Windscreen-C...0325?pt=UK_Holders_Mounts&hash=item2574212985
Click to expand...
Click to collapse
only a passiv holder. No active car-holder. You must put the USB-Charger extra.
active car-holder:
http://www.navisys.de/Brodit-Aktiv-Halter-Zigarettananzuender-fuer-Sony-Xperia-Acro-S
http://www.navisys.de/Brodit-Aktiv-Halter-Festanschluss-fuer-Sony-Xperia-Acro-S
Cant believe this is the top hit on google when looking for a acro S car holder. Jeez, Sony - dont need our money or what?
Hi, I've recently bought micro USB slot - the same as in the picture, but I can't connect it, I do not know which pin is the power supply. I tried 1 and 5, but it did not work. :crying: Does anyone can help me?
Link to pictures:
serwer1314328.home.pl/upload2/GU12.JPG
serwer1314328.home.pl/upload2/GU12.jpg