Related
wifi working with patch.
http://forum.xda-developers.com/attachment.php?attachmentid=325161&d=1273647492
http://forum.xda-developers.com/showthread.php?t=679680
could someone resize it to 240x320 please? cant wait to try this
Heads up! New Kaiser Wifi update: http://forum.xda-developers.com/showpost.php?p=6456191&postcount=33
Old one replaced build.prop with wrong version. Reinstall and use the new Wifi update.
Also to get rid of android-rebooting-problems with GPS Test application do the following:
1. Start terminal emulator
2. su
3. cd system/lib/hw
4. rwsystem
5. rm sensors.msm7k.so
6. rosystem
7. exit
8. exit
9. restart phone
So how is it? I'm too lazy to install it.
Dukenukemx said:
So how is it? I'm too lazy to install it.
Click to expand...
Click to collapse
Seems like a really nice build. I'm using 320x428 with 144 dpi. A bit slow because I'm currently not running in NAND but I would expect it to perform quite well once I go back to running NAND again.
I haven't tested it very much yet as I'm doing some experiments in WinMO at the moment.
just tried
hey
i just downloaded this and i have to say im impressed about this.
as i love the eclair design and everything and the donut speed i have to say this is impressing because it is FAST! not as fast as donut but pretty much the same. that could be due to the 500 mHz OC but i just like that build.
just needs to be optimized a bit, maybe a few apps like astro and others
and as the developer has a new phone we need a new one.
But i have to say its awesome!
i love it already and just tried it for 9 min.
just the OC needs to be removed i noticed right now and is there any way to set another value for the screen sensebility because quiet often it does not react on a touch.
so keep updating this!
nick
nice rom but it chews through battery like crazy. With a full charge battery will drop from 99 to 75(battery fix removed OC and set 1400 value) with just a 10min phone call and a couple txts. I think what we need is a new kernel highly optimized for battery life using the latest patches. Judging from the name alone of the kernel its running right now 2.6.25-01051-gc362ac-dirty and the fact that 2.6.25 was released in jul 2008 i think theres room for tons for improvement.
Does anyone know how to adjust the microphone gain? my friends complain they cant hear me..
The wifi scan interval is set to 15 seconds by default in this release. That will have a negative effect on battery life if you are out of range of a known network and have wifi enabled. I'll put together an update to change this when time allows. I use 120 seconds myself.
kallt_kaffe said:
The wifi scan interval is set to 15 seconds by default in this release. That will have a negative effect on battery life if you are out of range of a known network and have wifi enabled. I'll put together an update to change this when time allows. I use 120 seconds myself.
Click to expand...
Click to collapse
Thanks to update.
It working good on Polaris.
Also i change interval to 180 and density to 120 in .prop
Here's an update that changes the wifi scan delay to 120 seconds and also (not tested yet) changes the model name from Vogue to Kaiser.
i'm still trying to figure out if it's possible, somehow, to flash an update.zip file (to be able to use the cyanogenmod skins) with the nomorootfs we're using, instead of converting the skins to metamorph format
does anyone know if it's possible or how to do it?
Can't get wifi to work with updates, which one should I need?
kallt_kaffe's works for me. If something isn't working like it should, power off the phone and remove the battery. Then hold down the power button to remove any remaining power left. Place batter back in and try again.
Also, make sure to always fix permissions when you apply updates, even for wifi.
Dukenukemx said:
kallt_kaffe's works for me. If something isn't working like it should, power off the phone and remove the battery. Then hold down the power button to remove any remaining power left. Place batter back in and try again.
Also, make sure to always fix permissions when you apply updates, even for wifi.
Click to expand...
Click to collapse
edit: how stupid can I be? I've bought another phone and forgot to add the mac adress.
Certainly think mod needs work. So far the battery meter is off, and all this time I thought it drained less power. A lot of pop ups to force close apps. A lot of apps are running that I don't use.
mssmison didn't say he was going to put any more effort into it either. Hopefully, someone will pick it up.
Dukenukemx said:
Certainly think mod needs work. So far the battery meter is off, and all this time I thought it drained less power.
Click to expand...
Click to collapse
Try deleting /data/system/batterystats.bin. That usually helps when the batterymeter has gone bad.
A lot of pop ups to force close apps. A lot of apps are running that I don't use.
Click to expand...
Click to collapse
Have you removed or renamed /lib/modules/hw/sensors.msm7k.so? After I removed that it runs very stable for me.
kallt_kaffe how do you do it?
I'm new to the androidinstall.tar method. I'm tyring to run from haret but it seems impossible.
You said you where experimenting with something in winmo, so that implies you're using haret? Are you running from haret?
When I try, Polymod, and Mssmission they don't show an install option, when I try myn and incubus I get it installed but I get no sound. It was actually your gps kernel that let me get things installed all other kernels i tried had non-functional dpads within the installer environment. Also, trying another kernel once installed didn't fix the sound issue.
Anyhow just let me know if you're using Haret. I wonder whats up with the sound and missing install option. I tried the install two different ways one with a 2gb fat32 partition, and then another attempt using three primary partitions 1.3gb fat32, 300mb ext, 300mb ext. All installers then would give me options beside's fat, but not all intallers would have an install option.. I'm using radio 1.71.09.01.eMo, model: kais100, os: wm6.5 (shifu v.3)
kallt_kaffe said:
Have you removed or renamed /lib/modules/hw/sensors.msm7k.so? After I removed that it runs very stable for me.
Click to expand...
Click to collapse
I try start Skyforce game, but it forceclose.
It can work after i added "sensors.sapphire.so" into /lib/modules/hw/
I've installed the cyanogenMod updater from the marketplace, but it can only find older versions, no experimental versions, whatever option I set in the program.Anyone?
Dukenukemx said:
Certainly think mod needs work. So far the battery meter is off, and all this time I thought it drained less power. A lot of pop ups to force close apps. A lot of apps are running that I don't use.
Click to expand...
Click to collapse
battery life has been fantastic for me on this build...
although I reverted back to 400mhz and got rid of compcache.
I am sure that OCing to 500 by default is draining the battery faster.
I would rather a usable phone than a fast one...(although it still seems very fast to me)
Hi,
I've had my Archos G9 80 updated to the latest android official 4.0.5 from and since then i'm expriencing lots of crushes and freezes. I'm getting them randomly with no specific app working.
Also, i have tried to do full formats (Android + Data), and still having same issues.
Does anyone have any idea what else i can try?
Thanks.
I had lots of freezes too (not only with the latest firmware). They seem to be gone since I changed the CPU govenor from "hotplug" to "interactive". I'm not sure yet that it was the reason, but try it and let us know if it helps.
DeeDroid said:
I changed the CPU govenor from "hotplug" to "interactive".
Click to expand...
Click to collapse
how this is done? Ι have the same problem!
africa_twin said:
how this is done? Ι have the same problem!
Click to expand...
Click to collapse
Yes, can this be done from the phone itself? Within the ROM?
You can set this in any tool that is intended for overclocking. I don't overclock, I only changed the Govenor.
I use "SetCPU". ("No-frills CPU Control" should do the same.)
So does this have any other effects on the phone?
RichWPX said:
So does this have any other effects on the phone?
Click to expand...
Click to collapse
Nothing too serious. Your CPU is clocked dynamically so it doesn't run full speed when there is nothing to compute(save energy). To my understanding the govenor is basically a policy to manage how quickly the frequency steps up/down on changing CPU load. So "powersave" is supposed to save energy but make the system a little less reactive than "interactive" Governor for example. I think I read somewhere "hotplug" deactivates the second core on low load situations, I suspect for some strange reason my device might have crashed sometimes on trying to wake up the sleeping second core. Well maybe I'm wrong, that's why I'm interested if it helps others.
I didn't notice any change in battery lifetime, mostly it's the display anyway that drains the battery. Everything is running well, battery lifetime is great too and no crash/freeze at all since i changed that setting and it crashed almost every damn day before, no matter if it was Honeycomb or ICS.
I downgraded the device to 4.0.4 and since then, no crushes.. I guess for some reason 4.0.5 isn't stable on my device.. ill stick with this version unroll they get another one out..
To downgrade, just install official update file of the version you want to upgrade to..
DeeDroid said:
Nothing too serious. Your CPU is clocked dynamically so it doesn't run full speed when there is nothing to compute(save energy). To my understanding the govenor is basically a policy to manage how quickly the frequency steps up/down on changing CPU load. So "powersave" is supposed to save energy but make the system a little less reactive than "interactive" Governor for example. I think I read somewhere "hotplug" deactivates the second core on low load situations, I suspect for some strange reason my device might have crashed sometimes on trying to wake up the sleeping second core. Well maybe I'm wrong, that's why I'm interested if it helps others.
I didn't notice any change in battery lifetime, mostly it's the display anyway that drains the battery. Everything is running well, battery lifetime is great too and no crash/freeze at all since i changed that setting and it crashed almost every damn day before, no matter if it was Honeycomb or ICS.
Click to expand...
Click to collapse
Thanks! And I have notices ICS is not as snappy as GB was... I mean GB flew! Swiping the screen, it feels a little off now.
RichWPX said:
Thanks! And I have notices ICS is not as snappy as GB was... I mean GB flew! Swiping the screen, it feels a little off now.
Click to expand...
Click to collapse
GB? Gingerbread? Guess you mean Honeycomb. Anyway, I experienced ICS to be much better.
DeeDroid said:
I had lots of freezes too (not only with the latest firmware). They seem to be gone since I changed the CPU govenor from "hotplug" to "interactive". I'm not sure yet that it was the reason, but try it and let us know if it helps.
Click to expand...
Click to collapse
changing govenor from "hotplug" to "interactive" seems to help against random freezes. 4 days without problems until now i had freezes with ics, but never with honeycomb.
device: archos 101g9
[ROM] Archos ICS - Firmware 4.0.5(4.0.3) - ROOT & BUSYBOX , Only for SDE (thanks surdu_petru)
DeeDroid said:
I had lots of freezes too (not only with the latest firmware). They seem to be gone since I changed the CPU govenor from "hotplug" to "interactive". I'm not sure yet that it was the reason, but try it and let us know if it helps.
Click to expand...
Click to collapse
That seems to be my problem too. Setcpu requires root. is there a very easy way to do this, just to run this setcpu? There used to be a z4 tool, but can't seem to find it anymore.
Edit I see that I need superoneclick. Will temporary root suffice or will I need permanent root to change the governor setting.and keep it so.
Unfortunately all know temp root variants tend to brake things- im Honeycomb sound, in ICS 3d driver.
The only real option is to enable SDE and use custom firmware.
As for freezes- try reinstalling apps. Direct upgrade from Honeycomb does not work for all
tapatalked from Xperia Arc S
DeeDroid said:
GB? Gingerbread? Guess you mean Honeycomb. Anyway, I experienced ICS to be much better.
Click to expand...
Click to collapse
I have the same experience. Hc was laggy and slow. Ics is much faster and smoother.
Sent from my ARCHOS 80G9 using Tapatalk
gen_scheisskopf said:
Unfortunately all know temp root variants tend to brake things- im Honeycomb sound, in ICS 3d driver.
The only real option is to enable SDE and use custom firmware.
As for freezes- try reinstalling apps. Direct upgrade from Honeycomb does not work for all
tapatalked from Xperia Arc S
Click to expand...
Click to collapse
sorry for the n00b question, but SDE stands for ??? S ? Develeper Edition ?
Will "Superoneclick" not root my device ?
sbtwister said:
sorry for the n00b question, but SDE stands for ??? S ? Develeper Edition ?
Click to expand...
Click to collapse
Special Developer Edition
sbtwister said:
Will "Superoneclick" not root my device ?
Click to expand...
Click to collapse
No, it won't. Gen9 system layout is different than for most other devices
hey, back to topic
5 days without freeze with govenor "interactive". i witched back to "hot plug" this morning and had to reboot my tablet 2 times today. for my case, "interactice" seems to help against random freezes.
mines performance intstead of interactive... experienced some freezing n interactive..
Man I'm really pissed.
Yesterday I had to hard reboot 7 times
Sent from my X8 using xda premium
hmm,
sounds not good. archos stands not for high quality i guess. we get what we pay . i had an archos 101g8, now a 101g9 and trouble with hard-/firmwares since 2010. i think, this was the last one - no furthermore advantures
@IrishStuff09: you did reformat for ics or upgrade from honeycomb? the best way is to start from scratch and skip upgrades.
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
I do not experience this issue. When you flashed the rom, did you do a clean install? Have you formatting the device?
Yup.. I format everything.. I use the touch recovery and just use every option that it provides and wipe everything.. It even does it when there is nothing installed. I usually delete almost all the useless system apps that I don't use like the google music app and all of the ones civato provides... I even change the animation settings to .5 in the developer section.. should I turn them off all together?
Crimson Ghoul said:
Yup.. I format everything.. I use the touch recovery and just use every option that it provides and wipe everything.. It even does it when there is nothing installed. I usually delete almost all the useless system apps that I don't use like the google music app and all of the ones civato provides... I even change the animation settings to .5 in the developer section.. should I turn them off all together?
Click to expand...
Click to collapse
The animations should not have anything to do with it. Does this only occur on that rom? Have you tried other roms and experienced that issue?
not many other roms out there.. I have used stock and his.. had the same issue on both.. Also happens on my brother's a500.. it usually happens when unlocking and going into any app.. it sits there for a few seconds and then opens whatever it is i opened
Crimson Ghoul said:
not many other roms out there.. I have used stock and his.. had the same issue on both.. Also happens on my brother's a500.. it usually happens when unlocking and going into any app.. it sits there for a few seconds and then opens whatever it is i opened
Click to expand...
Click to collapse
This is starting to sound like a hardware issue. Before that is concluded, you could:
- Make sure the governor is not set to "conservative"
- Try a clean install of CM9
If the problem still arises, its most likely a hardware issue.
I'm using the OC kernel and have it to 1500.. I also always leave it on performance.. I figure it would kill my battery life but I don't use it much.. and i tried cm9 also.. too many issues as of right now
Crimson Ghoul said:
I'm using the OC kernel and have it to 1500.. I also always leave it on performance.. I figure it would kill my battery life but I don't use it much.. and i tried cm9 also.. too many issues as of right now
Click to expand...
Click to collapse
It doesn't seem it can be anything else but a hardware issue in that case.
NB. Overclocking to a high frequency can cause instability and bring about that issue (but since you experienced it on the stock rom, its quite likely not to be that).
the overclocking helps to speed it up a tad bit.. for the most part it just lags.. i did a clean install just now
Thought I would jump in. Stock ics would slow down and lag on me, jittery transitions poor performance in games or movies, but it took an hour not a few minutes. However testing the T20 kernel before the release kernel had that exact issue, bogging and lagging within minutes.
His release kernel doesnt do it, and flex extreme as well as my cm9 builds don't, even with T20 kernel. Consider flashing that kernel to see what happens.
Side note...what issues did you have with cm9? And what release? My build 1 has been running for 3 days no reboots stable as can be undervolted and OC when needed. Something to maybe think to try to see if it persists. T20 kernel works fine with it too.
Tapatalked from my Galaxy S II.
Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
Yup, EVERYTIME I turned on my screen then unlocked it to laggggggg for a lil while. I'm now using CM9 n that issues gone. Try CM9
forum.xda-developers.com/showthread.php?t=1705554
A100 Running CM9 Nightly ROM n ezT20 OC Kernel :-D
To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.
eww245 said:
To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.
Click to expand...
Click to collapse
That reminds me...setting a screen off profile with the same min/Max speed can cause issues with that, give Max a notch or two higher. And don't have it change the governor leave it the same. So like interactive screen on Myst nit be conservative screen off, doesn't work that way.
Tapatalked from my Galaxy S II.
I had the same issue on stock. I noticed there are 2 weather applications installed (version 1 and version 2) immediately after I disabled the old weather application (version 1) this stopped happening. I used the ICS GUI to do the disable.
This might not be the case in custom rom, but is true for stock. Post reply and let me know if this fixed it for you also.
Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
Do you have a micro SD card plugged in? Try reformatting the card with a computer. Worked for me.
Sent from my A100 using XDA
I felt the need to add my two cents in this....this has been happening to me for the longest with the flex reaper rom ONLY. I've used stock and ZN's rom and those did not lag after unlock...only flex reaper. I'm currently using flex reaper and still experience it from time to time but doesn't destroy my day at all...
Give the CM9 nightly ROM's a go. No Bluetooth n no HDMI audio, but everything else is fine n damn smooth. Those issues will be fixed though
A100 Running CM9 Nightly ROM n ezT20 OC Kernel :-D
eww245 said:
To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.
Click to expand...
Click to collapse
I installed Flex 100 Reaper with stock and it it seemed to run smooth enough. Then I installed the OC kernal, and started to get lag. I was looking around to find the OC settings, but can't see it anywhere in settings..
Can anyone direct me to where can I adjust the governor/max/min CPU settings?
Sorry for the noob question.
htc_softbank said:
I installed Flex 100 Reaper with the OC kernal, and started to get lag. I was looking around to find the OC settings, but can't see it anywhere in settings..
Can anyone direct me to where can I adjust the governor/max/min CPU settings?
Sorry for the noob question.
Click to expand...
Click to collapse
Setcpu from the play store.
The overclock settings are not integrated like CM.
I'm running Albinoman's JB RC3 ROM, and like it a lot. The only significant problem I have is occasional severe sluggishness. When it happens, I'll open IntelliControl and I notice either of two things going on:
1) I'll see that the max CPU speed has been reset to 664000 or something close to that (it's always the same number, but I don't remember exactly what it is...600-something). Once I crank the max limit back up to 1036800, things are good again. What keeps resetting the CPU limit to such a low level, and how do I stop it from doing that???
2) I'll see that the CPU is maxed out at 1036800, but I can't figure out what's chewing up the CPU. What tool can I use to see what process is consuming all the CPU cycles when that happens?
Thanks for the help...
1. I can't tell you why it happens... but I know it is a common problem on the JB ROMs (on the Dinc). There was quite a lot of discussion about it. I know the devs are aware of the issue and were working on it.
2. I don't know of anything that will graph percentage of cpu cycles, or anything exactly like that. But try hooking the phone up to the PC and run ddms (part of the adb tool set) and see what it is doing (or failing to do). While ddms is running in verbose mode it will give you a running output of everything the phone is doing (along with all the errors and warnings).
MysticCobra said:
I'm running Albinoman's JB RC3 ROM, and like it a lot. The only significant problem I have is occasional severe sluggishness. When it happens, I'll open IntelliControl and I notice either of two things going on:
1) I'll see that the max CPU speed has been reset to 664000 or something close to that (it's always the same number, but I don't remember exactly what it is...600-something). Once I crank the max limit back up to 1036800, things are good again. What keeps resetting the CPU limit to such a low level, and how do I stop it from doing that???
Click to expand...
Click to collapse
That's because he's using an older version of Evervolv's qsd8k-common. It was fixed on Oct 10 with Change I3a0fff83: powerHAL: fix the screen off bug. This is one of the reasons I do nightlys, is to get all the new tweaks. This bug won't be fixed in his ROM till he resyncs his source and recompiles. It's triggered by the screen turning off. There's a workaround with Tasker, but since this bug is no longer in my ROM, I quit looking at it.
MysticCobra said:
2) I'll see that the CPU is maxed out at 1036800, but I can't figure out what's chewing up the CPU. What tool can I use to see what process is consuming all the CPU cycles when that happens?
Click to expand...
Click to collapse
CPUSpy is a pretty good app.
MysticCobra said:
I'm running Albinoman's JB RC3 ROM, and like it a lot. The only significant problem I have is occasional severe sluggishness. When it happens, I'll open IntelliControl and I notice either of two things going on:
1) I'll see that the max CPU speed has been reset to 664000 or something close to that (it's always the same number, but I don't remember exactly what it is...600-something). Once I crank the max limit back up to 1036800, things are good again. What keeps resetting the CPU limit to such a low level, and how do I stop it from doing that???
2) I'll see that the CPU is maxed out at 1036800, but I can't figure out what's chewing up the CPU. What tool can I use to see what process is consuming all the CPU cycles when that happens?
Thanks for the help...
Click to expand...
Click to collapse
For #1, a possible fix could be to use this power.qsd8k.so provided by tiny4579:
http://forum.xda-developers.com/showpost.php?p=32552961&postcount=264
Replacing this file fixed the issue on Pons's ROM, but it may wreak havoc on Albinoman's, I have no way to know. Make sure you have a good nandroid backup before attempting to use it. Or, just wait for Albinoman to release a newer ROM with the problem fixed in the source.
musical_chairs said:
For #1, a possible fix could be to use this power.qsd8k.so provided by tiny4579:
http://forum.xda-developers.com/showpost.php?p=32552961&postcount=264
Replacing this file fixed the issue on Pons's ROM, but it may wreak havoc on Albinoman's, I have no way to know. Make sure you have a good nandroid backup before attempting to use it. Or, just wait for Albinoman to release a newer ROM with the problem fixed in the source.
Click to expand...
Click to collapse
It should work fine on Albinoman's ROM. powerHAL is a generic jellybean feature and should work on all JB ROM's. You won't need the fix however on either of Pon's ROMs whether AOKP or CM10.
I'm finding the same issue on the 11/08 build. I replaced the file with the one you uploaded, yet no change. Still reverts to 614 when the screen is off.
I'm managing it with both Incredicontrol and Juicedefender, so on wake it returns to 1075, and the SAv2 seems much smoother than interactive for me. If there's a fix in the newer builds I may flash one (if I get the time), but for now I'm really impressed by how well this one is running.
Thanks,
...sorry...I was on the phone...
omniatic said:
I'm finding the same issue on the 11/08 build. I replaced the file with the one you uploaded, yet no change. Still reverts to 614 when the screen is off.
I'm managing it with both Incredicontrol and Juicedefender, so on wake it returns to 1075, and the SAv2 seems much smoother than interactive for me. If there's a fix in the newer builds I may flash one (if I get the time), but for now I'm really impressed by how well this one is running.
Thanks,
...sorry...I was on the phone...
Click to expand...
Click to collapse
It's supposed to change to 614 on screen off. The bug was that it would stick at 614 even on screen on.
I don't recommend that lib for cm. It's outdated.
Also I don't use sav2 anymore as it doesn't and won't implement project butter. Also interactive can be more aggressive than sav2 as it can jump frequency on touch via boostpulse which sav2 doesn't have.
Sent from my Galaxy Nexus using Tapatalk 2
Oh, well, then I guess I'll give the interactive another try. Maybe just needs to settle in longer. Got so used to ICS, wasn't sure what to expect from JB. Guess it's time I read back a few pages and see what else I've missed.
...sorry...I was on the phone...
Thanks, guys--appreciate the help!
Maybe its out of topic but since i still cant post on dev sub forum i wanna ask a question here to pons.
Im running your CM10 20121114, whenever i play music with appolo it always reboot my dinc.
Is any other had this problem too?
alph0 said:
Maybe its out of topic but since i still cant post on dev sub forum i wanna ask a question here to pons.
Im running your CM10 20121114, whenever i play music with appolo it always reboot my dinc.
Is any other had this problem too?
Click to expand...
Click to collapse
Yep, just a tad bit off topic.
I haven't had this problem before. Granted, I've never played music off my Inc, but I haven't heard anyone else complain, either. Can you PM a logcat? And it's always preferable to report errors off latest versions (currently 1120).
PonsAsinorem said:
Yep, just a tad bit off topic.
I haven't had this problem before. Granted, I've never played music off my Inc, but I haven't heard anyone else complain, either. Can you PM a logcat? And it's always preferable to report errors off latest versions (currently 1120).
Click to expand...
Click to collapse
Thanks for the reply Pons. Yes i think i will download the latest build sooner and test it again. Hope it (randon reboot with apollo) will not happen again on my dinc. But if it still, i will pm you the logcat.
alph0 said:
Thanks for the reply Pons. Yes i think i will download the latest build sooner and test it again. Hope it (randon reboot with apollo) will not happen again on my dinc. But if it still, i will pm you the logcat.
Click to expand...
Click to collapse
I use Apollo Music regularly on Pons's CM10, it works fine, doesn't reboot.
alph0 said:
Maybe its out of topic but since i still cant post on dev sub forum i wanna ask a question here to pons.
Im running your CM10 20121114, whenever i play music with appolo it always reboot my dinc.
Is any other had this problem too?
Click to expand...
Click to collapse
Try flashing to his newest build. It fixed a few problems for me and is incredibly fast. I had to reflash gapps from goo.im though because play store was force closing. Also, doubletwist is a better music player imo because it has a better interface and has good integration with the lockscreen.
I've been helping with minor problems in the Q&A section for some time, but now I face my own problem.
After softbricking my phone 3 days ago(probably from too many tweaks crashing in the init.d folder) I re-pristined my phone, and I'll list what is its specs below after recovery.
ROM: CM9RC2
Kernel: I tried all available from HADI and CastagnalT(except CFS)
Mod: Disable CPU Render, Seeder V5, KSM, 16 bit Transparency, Force GPU render, Disabled surface dither.
Probably the standard package in CM9RC2, but thing is it random reboots(mostly from wakes after locking). Once I was watching a movie, specifically the movie is in MKV format using MX player, it rebooted instantly too, after its back to launcher its fine until I finished the movie and locked phone, then when I wake it, it freeze reboot again.
Any ideas people?
possible problems/solutions:
1- maybe it is a problem with the battery, check if it gets fat when charging. if yes then go buy a new one
2- usually battery problems end up with force shutdown, so my secound thought is that it is a problem with the add-ons. try going pristine and sticking to the stock cm9 kernel with no add-ons and see if it still reboots
3- if the above didn't work then maybe it is a hardware problem
i hope i helped
7amada100 said:
possible problems/solutions:
1- maybe it is a problem with the battery, check if it gets fat when charging. if yes then go buy a new one
2- usually battery problems end up with force shutdown, so my secound thought is that it is a problem with the add-ons. try going pristine and sticking to the stock cm9 kernel with no add-ons and see if it still reboots
3- if the above didn't work then maybe it is a hardware problem
i hope i helped
Click to expand...
Click to collapse
I have a strong feeling its Seeder v5 behind this. The original Seeder gave me no issues.
The battery should be fine. I check it once in awhile anyway.
Nah, I don't seeders did it, May be a wrong flash or something, btw turn off force gpu rendering it gives more performance
Sent from my GT-I8150
probably your battery is going to dead. happened to many people that has the galaxy wonder from 1 year or a bit more. check the battery and see if it is swollen
7amada100 said:
Nah, I don't seeders did it, May be a wrong flash or something, btw turn off force gpu rendering it gives more performance
Sent from my GT-I8150
Click to expand...
Click to collapse
Really? I always thought its on for more performance.
SpadaBoss said:
probably your battery is going to dead. happened to many people that has the galaxy wonder from 1 year or a bit more. check the battery and see if it is swollen
Click to expand...
Click to collapse
My battery life is fine though. If its swollen a significant effect would be drastically bad battery life. I learnt this while studying about lithium-ion batteries and experience when I'm working in a camera shop
KiD3991 said:
I've been helping with minor problems in the Q&A section for some time, but now I face my own problem.
After softbricking my phone 3 days ago(probably from too many tweaks crashing in the init.d folder) I re-pristined my phone, and I'll list what is its specs below after recovery.
ROM: CM9RC2
Kernel: I tried all available from HADI and CastagnalT(except CFS)
Mod: Disable CPU Render, Seeder V5, KSM, 16 bit Transparency, Force GPU render, Disabled surface dither.
Probably the standard package in CM9RC2, but thing is it random reboots(mostly from wakes after locking). Once I was watching a movie, specifically the movie is in MKV format using MX player, it rebooted instantly too, after its back to launcher its fine until I finished the movie and locked phone, then when I wake it, it freeze reboot again.
Any ideas people?
Click to expand...
Click to collapse
CastagnaIT 7.5 or 7.3?
It seems many are having some difficulties with 7.5...
-- Sent from a GT-I8150 running ICS perfectly well. F'U, Sams#!t --
some factors
1. battery
2. undervolting
3. governor
4. confilicting scripts
probably there are other factor i dont know
im running cm9 rc1 with castagnaIt kernel 7.5,,
and doesnt have that issue with random reboots,,,
and i also have tons of games,,, 229 user apps to be exact,, including games,,
i also installed link2sd,, partiton my 32gb mmc into Fat32// ext2,,, and no rebooting problems,.,,
what im experiencing is that,,
when i lock my phone,, or leave the phone,, when i try to unlock the phone,,, the screen wont show up but the back button as well as the menu button lights up,,, dont know if its because of my link2sd app or what,,,
by the way,, im running pristine before i started tweaking my phone,,, and took me almost a day re-installing all my apps,,, without the use of TB,,
pepoluan said:
CastagnaIT 7.5 or 7.3?
It seems many are having some difficulties with 7.5...
-- Sent from a GT-I8150 running ICS perfectly well. F'U, Sams#!t --
Click to expand...
Click to collapse
7.5 yes. maybe that's it though.
hadidjapri said:
some factors
1. battery
2. undervolting
3. governor
4. confilicting scripts
probably there are other factor i dont know
Click to expand...
Click to collapse
I once used your 1.4 but it still happened. But only once, I was in a bad mood so before it even rebooted I flashed 7.5 back LOL.
Will try using 1.4 hadiconfig back and test.
Don't think its the kernels own problem though.
santiagoruel13 said:
im running cm9 rc1 with castagnaIt kernel 7.5,,
and doesnt have that issue with random reboots,,,
and i also have tons of games,,, 229 user apps to be exact,, including games,,
i also installed link2sd,, partiton my 32gb mmc into Fat32// ext2,,, and no rebooting problems,.,,
what im experiencing is that,,
when i lock my phone,, or leave the phone,, when i try to unlock the phone,,, the screen wont show up but the back button as well as the menu button lights up,,, dont know if its because of my link2sd app or what,,,
by the way,, im running pristine before i started tweaking my phone,,, and took me almost a day re-installing all my apps,,, without the use of TB,,
Click to expand...
Click to collapse
Yeah! That happens to me too ... Quite a lot. But then sometime I get pissed while trying to get my phone back on, I spammed and it reboots lol.
KiD3991 said:
7.5 yes. maybe that's it though.
I once used your 1.4 but it still happened. But only once, I was in a bad mood so before it even rebooted I flashed 7.5 back LOL.
Will try using 1.4 hadiconfig back and test.
Don't think its the kernels own problem though.
Yeah! That happens to me too ... Quite a lot. But then sometime I get pissed while trying to get my phone back on, I spammed and it reboots lol.
Click to expand...
Click to collapse
maybe kernel problem. i suspected UV to cause this kind of problem.
this happen once on my very first extreme UV mode and this problem is reduced when i raised the voltage one stage
i'm gonna make newer build without any UV i guess
SpadaBoss said:
probably your battery is going to dead. happened to many people that has the galaxy wonder from 1 year or a bit more. check the battery and see if it is swollen
Click to expand...
Click to collapse
my battery is nearly 1 year now but didnt swollen