So I've have been having this issue on and off with my phone I have the Rhod210 US T-mobile Touch Pro2 with the most recent Energy ROM and for a couple months now the screen will randomly change orientation and it will do it constantly even if the phone is closed and on a level area. I also have an issue where this will happen after the screen has been turned off, after a minute with the screen off the back light will come on and the orientation will keep flipping from Horizontal to Landscape over and over again.
I have an overclock set on this phone but I didn't have this issue until weeks after I had my overclock set
Anyone else having this problem? Is my phone broken?
Is there a fix for this that I don't know about?
Thanks in advance guys
Honestly, it sounds like a faulty G-Sensor. Flash a stock ROM and see if the problem persists.
I calibrate the G sensor and it still doesn't make a difference. It seems to just happen randomly and for a few minutes or sometimes a whole night.
You should flash a stock ROM to see whether this is a hardware issue or not. If it happens on a stock ROM with nothing installed, then it is hardware. If it does not happen, then you've got a problem with the software on whichever ROM you're currently using.
Related
Hello,
I started to notice one annoying thing recently. After i miss call, display stays on. It is dimmed to the max i think but still - it's on and it drains my battery. I have enabled the pattern lock, so i thought that was the reason of this issue, but after disabling it, issue persists. Does anyone notice the same problem or perhaps can check it and report back? Is there any solution?
I'm on unbranded and not rooted phone.
Thanks in advance!
Thought I'd share my experience about this. I was running Paranoid Android 0.9, no issues at all. One day I was talking on the phone and noticed the screen flickered quickly... then it just stayed on. I hung up the phone a minute later not thinking much of it.
Well today I made some phone calls and the screen never turned off.. I had to manually turn it off via power button. I installed Paranoid 1.1, no changes. I flashed Trinity kernel, no changes. Just a bit ago I fully wiped the device and flashed the latest 6/4/2012 CM9 Nightly and the issue is still present.
At this point I'm guessing there is definitely a hardware issue. I have never dropped this phone and it's in mint condition aesthetically. It's the GSM version bought via Expansys.. and I won't waste my time with warranty through them I'll just bare with using the power button to turn the screen off/on during calls.
Another note, I noticed if I tap or press firmly on the proximity sensor area during a call it will trigger the screen to momentarily turn off.
Could this possibly be a CM9 issue (Paranoid is built from CM9)? I may try flashing a rom not built from CM9. I've searched high and low on the internet and NO ONE has had this issue which is leading me to believe that there's no way this is hardware related.
All roms are based off of AOSP.
I guess I'm the only one.
There are some apps that can test your Proximity sensor, though I can't remeber the app name.
/Edit: Link to the app.
Have you tried franco kernel to check if this happens aswell? You can then pin down the possible kernel related issues.
Firmware again plays a major factor? What firmware are you on? Mines came as an OTB 4.0.2 and I too had this similar issue where I had to manually swipe my finger against it, Upgraded to 4.0.4 and the issue went away. Weird.
Misledz said:
Have you tried franco kernel to check if this happens aswell? You can then pin down the possible kernel related issues.
Firmware again plays a major factor? What firmware are you on? Mines came as an OTB 4.0.2 and I too had this similar issue where I had to manually swipe my finger against it, Upgraded to 4.0.4 and the issue went away. Weird.
Click to expand...
Click to collapse
I'm on 4.0.4. I just flashed Android Revolution (4.0.4 based rom with the stock kernel) and the problem still persists. It's very intermittent. Sometimes the proximity sensor detects an object close thus turning the screen off, but it only turns it off for 2-3 seconds or sometimes not at all. I wonder if a piece of dirt/dust is sitting right on the sensor?
I tried a couple proximity sensor testing apps out there but none of them work and say "If your reading displays nothing or the maximum value then your device does not support reading of proximity sensor values".
The apps display a max of 5cm with a resolution of 5.. and the current value is ALWAYS a 5.
I just find this hard to belive I'm THE ONLY ONE on the interwebz, out of MILLIONS sold, who has reported this problem.
Ok, I'm a complete idiot....
Turns out the Galaxy Nexus proximity sensor ONLY works when the phone is in the upright position!!! I kept testing it with it flat on the table and, by design, it's SUPPOSED to keep the screen lit.
Hello,
The screen of my moto 360 goes randomly off and vibrates at that moment, just like when you dim the screen with your hand., but now I'm using it. It's very frustrating because I can't even open an app normally or the screen goed of and I need to start over again. Does anyone know how to fix this?
Having same issues with mine.
Really strange and really annoying. Its like when u cover it with palm. It vibrates and screen goes off but ur in the middle of trying to do something. Anyone else having this problem?
Glad I'm not the only one having this issue, just got my Moto 360 today. I'll be in the Settings or other parts of the watch and it will just randomly turn off. It is really frustrating to deal with.
I have the same issue. I have pretty hairy arms so I wonder if the hairs are somehow triggering the capacitive touch screen.
you guys try to do a reset on the watch yet?? not just a reboot..
Any updates on this? I'm having the same issue
Any updates? I have the same issue I think it happend after udate to 5.0.2 but I'm not sure.
I'm also having the same problem. I picked up a new Moto 360 during the BBY sale rush of the last couple of days. At first it was buggy but the screen seemed to stay on while working with it. Then it had a system update, and since then most bug issues (like the faces not updating with the companion app changes) went away, however from that point the screen constantly shuts off, usually with a little buzz, while I'm interacting with the watch.
For instance, regarding the sensor used to turn off the watch if you palm it. I thought maybe that was it, so I was looking for a way to turn that off. I went into settings, and spend about 10 times of the screen shutting off before I could get to "accessibility settings" just to see if that might be there.
This problem occurs whether I'm wearing the watch or not (trying to eliminate arm hair or similar), and has occurred after a factory reset and re-pair with my phone (Note 4). Ambient sensor settings don't help, because all that does is make the screen go dark instead of off, but it still reverts back to the clock no matter what I was doing.
Any ideas? Any way to turn off a sensor perhaps, maybe in a custom ROM? Since this seems to be associated with an update near as I can tell, I wonder if a fix is coming from Moto or if it's too rare of an issue to be on their radar.
As an update, I replaced the watch with a new one, and this new watch is perfect. It started on outdated software which I left on for a bit to make sure it didn't show the problem, then I updated. Still no issues. I think there is a chance the problem is software regardless, but either way it must be a small portion of watches and isn't necessarily tied to any particular outside software influence (phone model or android version, or installed apps as NONE of those things changed). My advice to people reading this thread is to exchange the watch or get an RMA if possible.
Same Issue
Hi All,
I have the same issue. Sent it back for repair so let's see...
Same issue here as well
I've been reading through the previous threads and I'm still confused if the issue is hardware or software related. I have the AUO panel and have broken swipes, and times where I can't scroll properly. This has been going on a couple months now and it's getting on my last nerve since it's frequently happening when I need my phone to work properly. All this time I assumed it was software but a couple threads mentioned it was hardware. Trouble is, some people with the JDI screen also have issues so I don't understand. My question is, has anyone ruled out software by flashing an AOSP rom? I'd rather not send this to Sony if at all possible since they don't cross ship and I'd be without a phone.
I have rarely an issue with the touch screen, when swipe up or down, it doesn't swipe it acts like I've just touched (clicked) once the display. I think it is a software issue, because in my case, if I turn off the display wait for 2-3 seconds and turn it on, it works with no problems.
Can you point me please to other threads that have this issue in discuss?
Thank you!
Have you removed the asf from the screen and placed an actual screen protector on it? I found that this really helped with the weird screen issues.
I have a screen protector over the ASF. But that has nothing to do with my issue, because, like I said, when I turn the display off, wait 3 seconds, and on again everything is working normally.
vibecatalin said:
I have a screen protector over the ASF. But that has nothing to do with my issue, because, like I said, when I turn the display off, wait 3 seconds, and on again everything is working normally.
Click to expand...
Click to collapse
Yeah, I reboot usually and the issue temporarily goes away. Then it will come back a day or two later. I'm afraid to remove the ASF because I've read some issues with goes touches even with a screen protector. I just want the issue to be fixed... I was thinking of flashing a AOSP rom but wanted to see if anyone with that ROM had any trouble or not. Maybe the L update in January will fix things.
Here are the resources I've read on this issue:
http://talk.sonymobile.com/t5/Xperia-Z1-Compact/Touchscreen-loosing-touch-issue/td-p/580111
http://johnhaller.com/blog/2014-03-06--sony-xperia-z1-z1s-touch-screen-issue
http://forum.xda-developers.com/showthread.php?t=2770293
I have rarely that issue, like I said I just turn off the screen, and after 2-3 seconds turn it on and it's gone. I'm sure this is a software related issue.
If it helps at all, I never had the issue in the two weeks I tried an aosp rom. However the camera and battery life were a bit lacking so I'm back on a stock rom.
I haven't have the issue too in the past weeks, I've wiping cache and dalvik cache pretty often , because I've installed some system apps. Anyway I will really want to know the cause of this
L.E. I'm still on stock firmware.
L.E. 2 : The Glove mode function, in the Settings-Display menu has an application or something? Has a file redirected to it? Is there in the phone's system a file than can be edited or deleted or something for the glove mode function? Maybe we will find answers there.
I'm not sure that I've made myself understood with the question.
I have a weird issue with my A2 Lite.
I tried couple of ROMs so far and it's all the same.
When I receive a call and answer it, I bring the phone to my ear and I can see that display goes off - that's good. But, despite keeping the phone close to my ear, the flash light turns on, bt or even airplane mode so it disconnects the call, it changes the screen brightness or mutes the mic during the call. It's like touch sensor was alway on with display off, so I can't even see what I'm touching and switching.
I even went back to stock MIUI to be able to run system check with *#*#64...etc. and proximity sensor works fine.
My problem is similiar to this one: https://forum.xda-developers.com/mi-a2-lite/help/lockscreen-notification-sound-proximity-t3867872.
This drives me crazy!!!
Did anyone have this problem or knows some tricks to fix it (beside smashing the sh..t on the wall)?
I experience the same thing sometimes with stock rom
keyone72 said:
I experience the same thing sometimes with stock rom
Click to expand...
Click to collapse
That - I didn't expect...
But it has to do something with the Android or kernel maybe. How does it come, that screen is being turned off but not locked (meaning insensitive for touches)?
Weird...
And I'm almost sure, it wasn't like this before... before I installed one of custom ROMs (Arrow maybe). But since then I even went back to stock Pie, so if any firmware/kernel manipulation caused it, with stock - it should've fixed.
I'm starting to dislike daisies...