I've had my Otterbox Defender EVO case for a week now. I picked it up this morning and noticed the plastic kickstand in the back is broken in 4 places.
I have not dropped my EVO nor have I placed anything heavy on top of it. My only conclusion is that this kickstand is a VERY cheap, paper thin piece of plastic and basically disintegrated under normal use.
Now I get to sit on hold with Otterbox for 1/2 hour to try and get my money back. Disappointing as rest of the case is great.
Sent from my PC36100 using XDA App
I got the commuter and LOVE IT!!! Love it so much that I sacrifice my extended battery just to use it..
But why the defender.. Isn't it much thicker than the commuter??
Whats the big difference
fastfed said:
I got the commuter and LOVE IT!!! Love it so much that I sacrifice my extended battery just to use it..
But why the defender.. Isn't it much thicker than the commuter??
Whats the big difference
Click to expand...
Click to collapse
Bought the Defender for the built-in screen protector. The kick-stand is a joke though. It is literally thin as a sheet of paper. Completely shattered. I have now been on hold for 15 minutes waiting to speak to Otterbox. Grrrr.
Will never buy from these people again.
Good news. I finally got through to Otterbox and they are refunding my money. Apparently the kickstand problem is a known issue and they've been getting some blowback on it.
Too bad. I liked the case otherwise.
Are they paying for the return postage or do you have to?
_MetalHead_ said:
Are they paying for the return postage or do you have to?
Click to expand...
Click to collapse
I don't have to return it at all. I am guessing this has been a HUGE problem and that is why they are being so nice - that or their profit margins are so huge on these things that they are better off just eating a few and maintaining good customer relations than making me return a defective product and having me tell all my friends that they suck.
Their case sucks (the kickstand anyway), but they did right by me.
I called yesterday with a problem of my plastic inner case not snapping closed completely, and they are sending me out a new case nc today...
Yeah, the kickstand is flimsy, but I dont agree its as "thin as a sheet of paper"..
their customer service is top notch, so far....
Yep, I looked at it today and noticed it was cracked so I went ahead and called and they are replacing it for me. I asked if there were any plans on revising it with a metal kickstand and she told me if they get enough complaints then they would but it would take another couple months to do. Great customer service, just wish they would have used metal in the first place.
Sent from my PC36100 using XDA App
They offered me a new one but I figured, what's the point? It will just break again. They credited back my money without even asking for the case back. I ordered the Impact which will provide protection but I can still use the EVO kickstand.
I just looked an my Defender again. Lord, that kickstand is destroyed. The weird part is that to this day, I still have no idea what happened to it. One day it was fine and the next day it was shattered. I never dropped it or dropped anything on it.
Who knows. Weird.
The overall case is excellent but the kickstand and the holster are complete disasters. The holster literally rattles when you wear it due to the VERY loose clip on the back. Also, as big as the Defender is, the holster seems two sizes again larger. You could carry a paperback novel in that thing.
Defender - odd mix of awesomeness and complete sucktitude.
Yeah this thing was/is a massive fail from the day one shipping issues to the case (and holster) itself. 8 days of prodding them to get mine and they finally shipped it Overnight. Screen protector giving me the oilslick look so I pulled it off,didn't need 2 anyway. The phone was way loose in the holster so I had to stick some felt pads in there. Today I took the phone & case out of my pocket to show it to somebody and the kick stand was cracked. I haven't even used it because I've been reading about all the broken ones. They had decided not to charge me for the case so I guess I can say it was worth the money.
Norwester said:
Yeah this thing was/is a massive fail from the day one shipping issues to the case (and holster) itself. 8 days of prodding them to get mine and they finally shipped it Overnight. Screen protector giving me the oilslick look so I pulled it off,didn't need 2 anyway. The phone was way loose in the holster so I had to stick some felt pads in there. Today I took the phone & case out of my pocket to show it to somebody and the kick stand was cracked. I haven't even used it because I've been reading about all the broken ones. They had decided not to charge me for the case so I guess I can say it was worth the money.
Click to expand...
Click to collapse
That's the mysterious part in all this. No one seems to know WHY their kickstands are cracking. Like you, there was no event for me that cracked it. It is almost as if there is a fault in the plastic and it just cracked spontaneously?
I have a feeling that the problem is not in the thinness of the kickstand, but that somehow they got a run of VERY brittle plastic; however, when i pick up what remains of the kickstand and try to break it with my fingers it is very tough and won't break.
Odd.
So it seems that for some reason, the area where the kickstand attaches to the phone is VERY brittle whereas the main body of the kickstand is very tough.
Ah, I see the problem now...
The core of the kickstand on the reverse side is hollowed out. While the kickstand itself is thick and sturdy enough to handle the job, the middle has been shaved down to paper-thin. If there is any twisting of the kickstand at all (like it catches on your pocket fabric as you remove it) that twisting motion puts stress on the weakest part of the stand (the paper thin area between the pins that hold it to the case).
If they had just made the kickstand a solid piece of plastic none of us would even be having this conversation. Since the hollowing out of the kickstand adds nothing to it's functionality and makes it easy to break, one has to wonder why they made that design choice?
mitchellvii said:
I just looked an my Defender again. Lord, that kickstand is destroyed. The weird part is that to this day, I still have no idea what happened to it. One day it was fine and the next day it was shattered. I never dropped it or dropped anything on it.
Who knows. Weird.
The overall case is excellent but the kickstand and the holster are complete disasters. The holster literally rattles when you wear it due to the VERY loose clip on the back. Also, as big as the Defender is, the holster seems two sizes again larger. You could carry a paperback novel in that thing.
Defender - odd mix of awesomeness and complete sucktitude.
Click to expand...
Click to collapse
After reading what happened to you I won't even try to open the kickstand on mine. As far as the holster is concerned I solved the looseness by small pieces of transparent silicone tape in the inner four corners and it's a snug fit now.
I have done almost everything I could to break mine including bending it pretty good and everything is fine. Doesnt rattle at all and I have opened and closed it over 1000 times.
ClevelandWheeler said:
I have done almost everything I could to break mine including bending it pretty good and everything is fine. Doesnt rattle at all and I have opened and closed it over 1000 times.
Click to expand...
Click to collapse
good idea!
i guess ill be buying the ballistic case
My kickstand is thick i did tape my corners. Good case just big
Sent from my PC36100 using XDA App
They sent me a new case and i received it Dec 24, order was placed just a few days earlier by a csr. Was told it had a redesigned kickstand but it is still very similar in design. It is slightly thicker but now has issues with staying locked in when not in use. Durability is tbd.
W t f just used my kickstand 1 time and it popped off.. and I can't get it back in to the slots
from my phone duh
Related
Picking up my Evo tomorrow just wondering what you guys think is the best case to get. I'm a mechanic so its gonna be abused.
Sent from my HERO200 using XDA App
Still waiting on mine but when I get it I wil let you know.
Ok. Thanks
Sent from my HERO200 using XDA App
I would go with the seidio if i had to pick between the two. I am a welder and the otterbox has absolutely no protection for the speaker or camera. I ordered the trident witch has screens to protect both the camera and the speaker...... I am on my 3rd speaker on my phone, it was poorly protected from the factory and collects anything magnetic really well. It also has more then a peel and stick protection for the screen.
just my 2cents
dekcufi said:
I would go with the seidio if i had to pick between the two. I am a welder and the otterbox has absolutely no protection for the speaker or camera. I ordered the trident witch has screens to protect both the camera and the speaker...... I am on my 3rd speaker on my phone, it was poorly protected from the factory and collects anything magnetic really well. It also has more then a peel and stick protection for the screen.
just my 2cents
Click to expand...
Click to collapse
Nice thread to start. I have been wondering the same thing myself. From what I've read, it seems like the soft plastic on the Otterbox is thinner than it used to be. It's similar to the Seidio in that their port covers are now prone to being easily ripped off. The older Otterbox covers seemed to rip off less frequently.
I hate my Seidio Rugged. It's falling apart. I've ordered a Cyclops and will probably try out the Ballistic when it's released.
The Ballistic seems like it will be the toughest case made for Evo, especially since the Kraken will probably not be made.
I have both and prefer the otterbox much more.
CW
i just made this decision myself. Was deciding between the Otterbox Defender, Seidio Innocase Rugged with Holster, and the Ballistic HC (which should be released any day now). After much research and review, I decided on the Seidio, but actually going with the Best Buy version which is called the Platinum brand and its the Defense model. Same thing, but I can buy it tommorow and put it on my phone instead of ordering and having to wait. Plus, if something goes wrong, I can go back in the store and exchange it instead of having to ship it back.
The kickstand on the Defender is defective. Had mine for 3 days before it spontaneously crumbled. This is know issue and big problem.
Sent from my PC36100 using XDA App
My kickstand is just fine.
The kickstand on my Defender broke somehow while the case was in my pocket,hadn't even used it. The holster was an extremely sloppy fit,had to glue some felt pads in it so the phone wouldn't rattle around. Pulled the screen protector off as I was getting the oil spill effect on the screen. I guess you can fix that with baby powder but I don't need two protectors on the phone. After all this plus the 9 day debacle/wait to get the case shipped to me Otterbox waived all charges and freebied me the case. I'd have been POed to have paid more than $10-12 for it.
The Rugged case is ugly compared to the Defender but I think it offers more protection and the holster is much higher quality. The Exoskeleton at least on the earlier versions is the weak point as the corners break off. Seido's CS did approve my replacement request and shipped me a new case within 48 hrs and the skeleton is a slightly different design so I'll see if it holds up better.
I'm looking forward to the Ballistic case.
so Norwester, you think the Rugged is a better case then the Defender?
I also really like the Ballistic, and that was my first choice. I just dont like the way that the back of it looks in the new pics of it since its redesign...looked much better before...that and it IS gonna be big. It being so big didnt bother me at first, but now I'm rethinking it
Norwester said:
The kickstand on my Defender broke somehow while the case was in my pocket,hadn't even used it. The holster was an extremely sloppy fit,had to glue some felt pads in it so the phone wouldn't rattle around. Pulled the screen protector off as I was getting the oil spill effect on the screen. I guess you can fix that with baby powder but I don't need two protectors on the phone. After all this plus the 9 day debacle/wait to get the case shipped to me Otterbox waived all charges and freebied me the case. I'd have been POed to have paid more than $10-12 for it.
The Rugged case is ugly compared to the Defender but I think it offers more protection and the holster is much higher quality. The Exoskeleton at least on the earlier versions is the weak point as the corners break off. Seido's CS did approve my replacement request and shipped me a new case within 48 hrs and the skeleton is a slightly different design so I'll see if it holds up better.
I'm looking forward to the Ballistic case.
Click to expand...
Click to collapse
Phone fits snug in mine, no slack at all. There are a few others with broken kickstands and others that are rough on them have no problem. I dont know what the issue is I dont believe they have any other revisions of the case out yet but if my kickstand does break you can bet your ass Im will be on the horn complaining about it, Not only did we have to wait more than a half of a year but as soon as it comes out there are a bunch of people having issues with it. I haven't had any issue and I got mine for free but this is suppose to be their toughest case that stands up to everything but water and people are reporting it doesnt even hold up to a pocket? Kinda crazy if you ask me but then again I am loving mine so far.
I went with Seidio, didn't know it came with the Innocase Surface too. That was a bonus, really liked my Surface on my Hero. Seems pretty durable I've pulled the case off my phone numerous times and no broken tabs. I really like the fact that the camera is completely covered. My only problem is the screen cover it came with has really bad glare, but that's not a big deal. All in all really pleased so far, I would definitely recommend it.
Sent from my PC36100 using XDA App
durandetto said:
I went with Seidio, didn't know it came with the Innocase Surface too. That was a bonus, really liked my Surface on my Hero. Seems pretty durable I've pulled the case off my phone numerous times and no broken tabs. I really like the fact that the camera is completely covered. My only problem is the screen cover it came with has really bad glare, but that's not a big deal. All in all really pleased so far, I would definitely recommend it.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
No glare on my otterbox screen (I did have to remove ther ZAGG protector) and the camera and led's are covered as well.
My Defender kinda sucked due to the faulty kickstand. I bought an Impact for $15 after discounts and I love it.
P.S. Otterbox promised me they would credit my card back within 2 days for the Defender. It has been a week and no credit so now I have to waste another half hour on hold to call and ***** about it. Pisses me off.
Sent from my PC36100 using XDA App
mitchellvii said:
P.S. Otterbox promised me they would credit my card back within 2 days for the Defender. It has been a week and no credit so now I have to waste another half hour on hold to call and ***** about it. Pisses me off.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
It has been thanksgiving and all.
Just received this yesterday for my son's phone and I had posted it in another thread, but thought I would bring it out into it's own for those specifically looking at this case.
I wanted to get some form of protection for his EVO without adding a lot of bulk since he will drop the phone being a kid. After getting it and putting it on his phone, I like the form factor and protection of the corners, but not necessarily the silicon form and lack of solid fit. Will see how the rubber holds it's shape through the process of him taking it in and out of his smaller pockets and I can already see that this will require cleaning often. The power and volume buttons are still very responsive with being surrounded by the silicon as well. Understanding that this is not a high level of protection, it should help with minor drops.
I'm not overly pleased with the ease that the rubber insert moves away from the phone at both the top and bottom. I guess that is to be expected without a shell surrounding the entire phone itself. Overall, it is a very nice compliment to his phone and the quality is good. Will see how it holds up. Will try to avoid double posts in the future..lol
UPDATE: Really like this case the longer he has it. Doesn't stick, even in his smaller pockets and the rubber insert is holding it's shape. So far really nice! Just got his 1900 batteries and cycled them twice and those have been lasting a good day with all of his gaming and a couple days if he lays off.
I have the one that is the 2 piece that snaps together with the clip. Been using it since they first came out and love it. Dropped the phone about 3 times and it has done its job.
Looks nice. I have the Seidio Innocase Rugged and used it for a month before getting the Ballistic HC. It's a great case I just like the Ballistic better. If any one wants to buy the Innocase Rugged I'll do $25 shipped to anywhere in the USA....
Sent from my PC36100 using XDA Premium App
Nice review. I can say I have had this case for 4 months and it still looks great.
Sent from my PC36100 using XDA App
It's a pretty good case. I'm on my second one now. RMA'd the first one because a corner of the hard shell broke off in my pocket (phone was never dropped). It happened right at the end of the 6 month warranty period but Seidio was nice enough to still honor the warranty. Now on my second one the same thing happened. Pulled it out of my pocket to find that the corner piece had broke off... I won't be buying another, but tbh I don't really like many of the other cases I've seen.
Since a fair few of you will now have one of these, I was just looking to get some thoughts and opinions on one please?
Also I know it can stand vertical with this case on, but can it stand landscape?
Thanks
U can do everything without any trouble, it's a great case.
Sent from my GT-I9100 using XDA Premium
TecQuality said:
U can do everything without any trouble, it's a great case.
Sent from my GT-I9100 using XDA Premium
Click to expand...
Click to collapse
I've seen that it can stand vertical on it's own when the case is on, I was wondering if it could stand landscape too?
Thanks
Sent from my GT-I9100 using Tapatalk
Yeah, it's a great little case. I bought the black one, and i'm looking at getting a blue one next. Really cheap for official ones from Trusted Sellers on ebay (roughly £7 without original packaging, £10 with)
the only downside is it lets dust through the little holes, so you get a neat little dust pattern on the back side of your phone - a regular removal and wipe on your trousers helps.
I've had one on it for about 2 weeks and I like it, only drawback is I had to shave down by USB connector plastic to get it to fit while the case is still on. I ordered another from dealextreme because it was really cheap. I notice the case just touches the mic area but doesnt cover it up. I like it because it's not very bulky and the plastic 'mesh' back fits over a soft case and makes it rigid and easy to hold.
Good luck for u
Got a generic cheap mesh case from eBay, its pretty awesome but as mentioned above, gets a bit dirty after some long time, and mine is cheap enough to start breaking on corners, had a few falls tho, and that's the purpose of a case, so the phone doesn't break instead
I had this case, it was okay at the start but in the end the plastic on the top corner started breaking away. Also the one and only time I dropped my phone with this case on I got a nasty scratch just above the screen where there was no protection. I had to ditch it. I'm using a plain black tpu case now, much more protection. The advantage of the mesh case is that its so slim.
Edit : Oh yea and its a dust magnet.
Got the original mesh case, I dropped it twice since I got it. First time no damage at all, protected the phone nicely. Second time the phone popped out of the case as it hit the floor (shoulder hight, had a nice spin to it also) but both the case and the phone didn't suffer any damage. So I guess it serves it's purpose and looks nice as well.
Aesthetically nice.
Crap if you want proper protection.
I bought it merely to protect the camera and back when I put the phone down to prevent scratching. For overall phone protection it's definitely going to be lacking as the top and bottom edges of the phone aren't covered. The case clips on easily but stays on fairly tightly. The rubbery material gives better grip when holding the phone. Dust does get in over a week or so over the back of the phone, though isn't noticeable with the case on, and can easily be wiped off. I think the case looks pretty nice, all key areas are fully accessible and for the price of about £8 was worth it.
is not compatible for i9100P
I've just buy the genuine Samsung mesh vent case for my Samsung Galaxy S2 win NFC (i9100P) but it is NOT compatible. My colleague on the i9100, not NFC, perfect fit.
Some ideas?
Light, strong and keeps the thinness we all love about our S2s!
Dropped mine a couple of times on to wooden floors and no damage yet
Protects the camera lens too when lying on a flat surface
The dust comments are true but only noticeable when u take the cover off so no big deal and it fits so snugly it kinda looks part of the phone!
To answer original question tho, no only stands in portrait
I got an official Samsung one given with mine. Good at protecting from scuffs when it's on a table or desk but wouldn't like to trust it with protecting my phone from a fall.
That's why it's sat unused in a cupboard at work! If anyone wants it just message me and I'll stick in the post.
Andrewawright said:
I got an official Samsung one given with mine. Good at protecting from scuffs when it's on a table or desk but wouldn't like to trust it with protecting my phone from a fall.
That's why it's sat unused in a cupboard at work! If anyone wants it just message me and I'll stick in the post.
Click to expand...
Click to collapse
I'll take the case if it's on offer, let me know your thoughts on shipping to Australia Figure you sent all your convicts here, so a case shouldn't be a problem
Last month I dropped my phone on bricks which cracked the screen badly. I got the screen repaired by Samsung but the sides bordering the bezel still have some scuffs. I put on a case to cover up the scuffs (and protect the phone too) but I really hate it. My phone is bulkier, I have to take off the case to get access to the battery and the case collects a ton of dust. How do you all survive with a case on your phone?
faceyourfaces said:
Last month I dropped my phone on bricks which cracked the screen badly. I got the screen repaired by Samsung but the sides bordering the bezel still have some scuffs. I put on a case to cover up the scuffs (and protect the phone too) but I really hate it. My phone is bulkier, I have to take off the case to get access to the battery and the case collects a ton of dust. How do you all survive with a case on your phone?
Click to expand...
Click to collapse
You have to shop around to get the right one. I bought the kickstand version offered by Sprint, it adds very little bulk, offers full access to all ports/buttons, slides easily in and out of pockets (isn't gel) and it has a kickstand (did I mention that already?).
Now, if I drop my phone on pavement from a high enough distance it's probably not going to offer me the same protection those huge, bulky otter box cases offer but I'm willing to take my chance.
easy i like to keep my phone in good shape. sure its slim profile is nice but is it nice all scratched to hell? lol i had/have a ballistics case which makes it really bulky, i got use to it and could slip it in/out of my pocket. Now i have the tpu extended battery case and its fine also.
I use silicon cases. They don't add very much size at all.
I just use the cheapo gel case i mean it slips off when I need to, stays on the rest of the time. It absorbs the impact in ways hard cases can't. But yeah the trade off on those is its about twice as thick as the thinnest hard case which really only helps with scratches.
The Root said:
I use silicon cases. They don't add very much size at all.
Click to expand...
Click to collapse
I agree with this. I have a silicon Tough Case (TC). Bought it from amazon for like $10. It is light and very thin. With the thin profile of my phone, with the case on ts still thinner than most other smartphones without a case. But i here were your coming from it is way better bare back.
Ive had mine since release day. Never once put a case on it. Dropped it pretty good at least 10 times and still no screen cracks or major dents. I will say that "Cheap plastic" helped it a ton. Try that with your glass iphone or metal framed phone, I bet you will get screen cracks and paint chips and large dents. I hate cases. Also I advise anybody and everybody to get their phone from Besy Buy Mobile. Their insurance is deducible free and virtually unlimited (every two weeks you can smash your phone to smithereens if you want) Cant go wrong. Never need to worry about a case or screen protectors.
Honestly the first time you drop it good with a case you just made your money back, so that helps me. Not to mention the Trident Aegis case = a hair thinner than the og evo. Sure, it isn't all sexy and skinny, but it'll still be beautiful years from now
I actually prefer my epic 4g touch with my tpu case over it being naked. But the the case has a very small form factor. On my OG epic I didn't like a case though.
Sent from my SPH-D710 using XDA
I use this thing. It takes an extra second to put it back in but I know it's secure.
I'm in construction (electrician) so I need something that won't slip from my hands while perched atop a ladder and won't get scuffed when clipped to my tool belt. I will gladly clean the case on a regular basis rather than lament a dirty, scuffed, and hard to replace rear panel. (Hard in terms of getting a new one.)
If I didn't need it for work, I would probably get one, albeit a thinner, more subtle one.
I look at it as a give and take. Sure I give up a little in terms of looks, but when it comes time to upgrade to another phone I am always able to get top dollar for my old phone.
Give the Sedio Active case a try. It is reasonably thin and you do not lose sensitivity on the volume and power buttons.
mdhscanes24 said:
Honestly the first time you drop it good with a case you just made your money back, so that helps me. Not to mention the Trident Aegis case = a hair thinner than the og evo. Sure, it isn't all sexy and skinny, but it'll still be beautiful years from now
Click to expand...
Click to collapse
i completely agree .
i actually had my e4gt for 2 days on the second day i dropped it and cracked the internal screen ,and i lost all my new years pics because the screen would not turn on at all .
but i also bought the trident aegis case . It looks quite cool imo . and i have a better hold of the phone as well. ive dropped it several times now and all i get is a bounce
I use a case no, no screen protector.
sent from a Android device
I'm always on!
Nine dollars is a much smaller price to pay than $150 or $499.99. That's how I stand it.
Sent from my SGH-T989 using xda premium
I got my phone in Dec after not having a phone from Feb - Dec last phone was iPhone 4, tried adding a line during black friday's .01 cent cell phone sale and amazon rep told me sale went until Dec 5 when tried to purchase it they said I was wrong, took 3 sup's before one actually said they do record every conversation and then hear the rep tell me the wrong details however thye where good on the .01 sale.
Got the phone and was given a zagg screen for Christmas and when I dropped it in March and it broke the glass I was glad I had the screen because it kept it in tact until I got the replacement for the $100 insurance so now I have extendable battery in order totally use the phone as intended but no extra case fits.
I like the extra weight and size the ext battery adds feels better in hand but totally believe in zagg screen for occasional dropping if there was an otter box for safety that would support ext batt I would totally get it since I've dropped the .01 and had to pay $100 for new.
I will say this about the screen, since it was already broken I tried scratching it with everything from a screwdriver to a chisel point file and it would not scratch makes me wonder why it is so fragile it breaks when dropped. Only reason I would use the zagg screen is to keep the broken glass in place otherwise I wouldn't have a screen cover.
I have a baby and he grabs my phone, bangs it on things, and knocks it off tables. My case and screen protector are a necessity.
Sent from my SPH-D710 using Tapatalk
Matte TPU case adds virtually no bulk to the phone at all. It's really a perfect fit and looks great. Twice over the last 2 days I asked friends if they liked my case and they replied, "what case?". That says it all.
I got a cheap ass case from eBay, solely for the purpose of making my phone weigh something. It adds almost nothing, maybe a 1/8 inch. But, I must say I like it a lot. My kids dropped my phone twice, and not a single scratch. The case held like a champ. Well worth the $6 I paid for it.
Sent from my SPH-D710 using xda premium
noobtoob said:
I got a cheap ass case from eBay, solely for the purpose of making my phone weigh something. It adds almost nothing, maybe a 1/8 inch. But, I must say I like it a lot. My kids dropped my phone twice, and not a single scratch. The case held like a champ. Well worth the $6 I paid for it.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Lol
sent from a Android device
I'm always on!
Nice
sent from a Android device
I'm always on![/QUOTE]
sent from a Android device
I'm always on!
Bought this case new from ebay knowing about its few problems being reported like the proximity sensor, call problems, and audio issues, but still preferred this over the lifeproof simply for its protection. When i first received it, my initial reaction was "wow, its here, and its HUGE!" But i carefully disassembled it and clean it out just in case, water tested it (passed), dried it off, and finally put my phone in its new suit of armor. It really made the phone huge, and i mean huge, but i honestly dont mind the added bulk because of its substantial protection and it still feels very comfy in hand and doesnt hinder the phones functionality at all. Speaker for music also plays very loudly and crystal clear unlike other reviewers have stated. I think its a great case to buy and kind of essential if you have a very physically active life. Now to the cons (although their aren't many): Unlike many other reviewers of the white version have stated, i dont have call proximity issues, only thing that happens related to proximity is when i turn the phone over to face down while playing music, it pauses, but thats expected because i had that motion option enabled. Next, phone calls work fine and i hear people just fine, but the caller on the other end may have a problem hearing you sometimes. But it rarely happens and most times they can hear you. Easy fixes are bluetooth and earphones. Lastly, the home button definitely requires more pressure to press and the menu/back "buttons" are a little harder to get to but you'll get used to it. Thats the only thing "wrong" with this case honestly and its still excellent to have. I would highly recommend it. If you dont mind a little bulk, get it. Again, great great case :good:
I have a brand new one in original packaging from otterbox if anyone wants, contact me through dm or 6785162209
Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing. There are many surface scratches on the screen which you can only see if you look at it while the screen is off under a super, super bright light. Doesn't affect the image quality at all. Outside frame (the gray part) is a little cracked in few places. Not a big deal.
Runs flawless on CM 10.2.1. Undervolted almost 100mV across the board.
I used to be OCD, but decided to save my health instead.
Aftcomet said:
Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing.
Click to expand...
Click to collapse
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.
bogdaryl said:
I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.
Click to expand...
Click to collapse
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case
aybarrap1 said:
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Fair enough. I suppose we don't always have ideal circumstances to our liking.
NexusS4gFreak said:
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-T999 using xda app-developers app
Aftcomet said:
Fair enough. I suppose we don't always have ideal circumstances to our liking.
Click to expand...
Click to collapse
LOL...I love my phone being slim and I can live with scratches. But after a few near misses with my toddler son and getting soaked a couple of times on the job, I decided I would have to give in. Bring without my phone even for a day would screw up my schedule. Amazing how much I depend on it.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
D00ky said:
I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.
Click to expand...
Click to collapse
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated
monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
For everyday protection sure it may be good, but when it comes to 10ft drop, water, being hit, stomped on, and numerous other things, the armor case is the best.
monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
NexusS4gFreak said:
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated
Click to expand...
Click to collapse
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.
D00ky said:
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.
Click to expand...
Click to collapse
I finally got 2mm foam as 1mm is hard to get. 2mm foam goes into gaps between ribs on the rubber on the back cover of the case. So this just might do the trick as the case closes ok.
The for the review, I have an Otterbox Defender and love it to death, but I've been thinking of buying one of these.
i have the Acase Superleggera Pro Dual Protection Case on my S3 and it is great!
Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?
DMF1977 said:
Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?
Click to expand...
Click to collapse
Not sure but I think that there's no fakes around. Enjoy it.
D00ky said:
Not sure but I think that there's no fakes around. Enjoy it.
Click to expand...
Click to collapse
Thanks!! But I'm sure there are plenty of fakes around...