Related
Hi, i am trying to install app2sd using the Nimbu guide found here : http://nimbu.amorvi.com/2010/05/how-to-root-your-htc-desire/
However, when i follow that guide and start to flash from the sd card, i get this error:
E:Can't symlink /system/xbin/[
E:Failure at line5:
symlink busybox SYSTEM:xbin/[
The card i am using to flash the app2sd is NOT partitioned. Is this an issue?
Here is some other info on my phone
- i have an orange phone, but i reflashed to the 1.21.... generic rom
- After installing this rom, i flashed the radio back to this one: update-bravo-radio-32.30.00.28U_4.05.00.11-signed.zip
If you need any more info let me know and thanks for your help
ok, just to update this...
i have now managed to install app2sd by reinstalling rootedupdate.zip
HOWEVER, now when i turn my phone on it just goes to the white HTC screen and hangs there, it doesnt ever boot up. Can anyone shed any light as to why its doing this and how i can fix it?
i have partitioned the SD card and did install it with a goldcard
in the mean time im gonna flash back to a non app2sd rom
anyone know why it might be doing this? it just hangs on the white htc splash screen straight after powering on
gyro11 said:
anyone know why it might be doing this? it just hangs on the white htc splash screen straight after powering on
Click to expand...
Click to collapse
If you are stuck in a boot loop, then like you suggested, it's most likely because you have not partitioned the SD Card.
You only need to create a Gold Card if your phone is software branded and is running a non-generic rom.
but ive rebooted the phone with a partitioned SD card and that doesnt work...Does the card i install App2sd need to be partioned?
gyro11 said:
but ive rebooted the phone with a partitioned SD card and that doesnt work...Does the card i install App2sd need to be partioned?
Click to expand...
Click to collapse
You replace the Gold Card sd card with your normal sd card. Then in recovery, you need to partition your SD card, this is for the benefit of allocating extra space with the ext partition, which is used specifically for the installation of App data.
That's why it is recommened to set a 0MB swap, ext2 with 512MB (for apps), and the rest of the partition to FAT32.
Make sure you wipe Factory Reset, Dalvik, Cache, SD:EXT and then flash the ROM. After you have done this and while you are still in recovery (don't reboot phone yet), install Apps2SD zip (only if you are installing a ROM that does not include Apps2SD). Power off phone and then insert your sd card into the phone (not the Gold Card). You then enter Recovery Mode again and partition the SD card accordingly.
ok, but im not sure your understanding (i might be wrong...)
I have 2 sd cards....1 which is a gold card which is NOT partitioned and contains the install file for app2sd
and 1 which is the sdcard i run in my phone under normal operation.
I am ONLY using the non partitioned card to install app2sd. As soon as it is installed i remove this card and insert the Partitioned card
Does this make sense? So i know that a partioned sd card Must be used when running the phone with apps2sd, but do i need a Partioned goldcard just to install it? i can i just use a standard goldcard for the installation (and then put in the partioned card after installation) (note...i am using a goldcard as i have an orange uk desire with a generic rom)
Ah yes i understand you now. Yep, the Gold Card should not be partitioned, only formatted as FAT32. After you have used the Gold Card to install Apps2SD, you then insert the other SD card and partition using that.
-------------------------------------
Sent via the XDA Tapatalk App
ok, so that is how i had it, with the partioned sdcard, but i am still getting the white htc splash screen and not getting any further. Any idea why this might be happening?
im installing it on the 1.21... update
try ext3 , NOT ext2
that did it for me.
rhedgehog said:
try ext3 , NOT ext2
that did it for me.
Click to expand...
Click to collapse
Do you mean to select the option:
SD:ext2 to ext3
as i have already done that and it didnt work
Hmm... strange...
Have you tried repartitioning your sd card? Set the values for swap and ext to zero, then check to see if it boots ok.
-------------------------------------
Sent via the XDA Tapatalk App
MasDroid said:
Hmm... strange...
Have you tried repartitioning your sd card? Set the values for swap and ext to zero, then check to see if it boots ok.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
nope, just tried with these settings and unfortunately still no luck. I even tried it without any sdcard in there at all and still the same result.
Could the radio version have anything to do with it? as (other than the update) thats the only other thing ive flashed to it
gyro11 said:
nope, just tried with these settings and unfortunately still no luck. I even tried it without any sdcard in there at all and still the same result.
Could the radio version have anything to do with it? as (other than the update) thats the only other thing ive flashed to it
Click to expand...
Click to collapse
What Radio version did you flash exactly? I don't think that would cause a problem unless you flashed an incompatible version. Are you running Bootloader 0.75.0000 or 0.80.0000?
I would suggest you flash back to stock Radio and then flash back to stock ROM also, as this will restore the stock Kernel. Then after that, carefully take it step by step and try again.
From the steps you have carried out, it all sounds ok to me. When you attempt this again after returning everything to stock, try a ROM that already includes Apps2SD, leaving you to just partition the SD card (after wiping and flashing the custom ROM while in Recovery).
The rom im using is the rootupdate base (1.15) with the 1.21... generic rom manually installed.
I then flashed the following radio:
update-bravo-radio-32.30.00.28U_4.05.00.11-signed.zip
This is really annoying as im finding myself flashing my phone daily now to get this working. I appreciate all your help but i think now im just gonna wait for a stable release of froyo to come onto the forums and update with that
Thats the stock radio version that you re-flashed so don't see how that would cause a problem.
-------------------------------------
Sent via the XDA Tapatalk App
Hi All,
I have a problem with my SD card. My phone doesn't recognise SD card after I created ext4 partition through partition magic on windows 7. Here is what happened.
- I have rooted desire running CM 7.0.3.
- I wanted to go back to Starburst 1.4 rom.
- I have class 4 16 gb sd card (fat + ext3) with 512 mb of ext3 and rest fat32 (this was when everything was running good)
- I flashed the new rom through CWM, but only got like 54 mb on sd left.
- So I manually formatted ext3 and changed it to ext4 using partition magic on windows 7 (connected sd card through a reader).
- After that I flashed the new rom, but still got the same size left.
- After that I went back to CM7.0.3 which is working fine for me.
However, at this time, my phone doesn't recognise my SD card.
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
I believe I was able to install CM7.0.3 coz it was a small rom was fit directly into phone's internal memory.
At this time, I can't see my SD card on phone. Can't play music or install any files or anything.
Looking for some quick help.
Thanks,
Satyam
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
topgunmatt said:
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
Click to expand...
Click to collapse
Hi Matt,
So are you saying that you got your SD card formatted by someone else using Rom Manager ?
- As of now, when I click on the inbuilt ROM Manager in CM7, it says " The SD Card needs to be mounted to use ROM Manager!"
That means my SD card is abviously not read by my phone.
Looking for some help. I don't want to do something silly at this time.
Atleast, as of now my phone is not bricked and is working, just the SD is not.
Any suggestions/comments or link to my problem is more than welcome.
Thank You
Hmmm, i smell another usb brick here, we've had so many these days, and all by people using cwm and flashing gb sense roms...just to prove i'm right, can you connect the phone to your pc? If you're not able to do that, then u have 100% chance it's a usb brick.
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
sroy001 said:
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
Click to expand...
Click to collapse
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
vnvman said:
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
Click to expand...
Click to collapse
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
sroy001 said:
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
Click to expand...
Click to collapse
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
i just fixed my brick lol . i found out bcuz i coulnt enable bluetooth
vnvman said:
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
Click to expand...
Click to collapse
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
sroy001 said:
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
Click to expand...
Click to collapse
Also just want to let the forum know that I'm running a custom ROM (CM 7) and don't see the option of software info under Settings>About phone. Any other way to find out rom version ???????/
Ok, sorry man, i was out for a ride
To see the CID you have to type "fastboot oem boot" in the terminal, after navigating to the path where you have the sdk, for example:
"cd c:/sdk/tools"
"fastboot oem boot"
Then you should get all the info, together with the CID ofc...obviously you need to have adb installed and working in order to do that (there ia a lot of tutorials for that, just use the search function).
As to rom version, you don't need it, just download the mtd0.img, open it with the hex editor and mod it with your CID, then go for the next step
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
vis-tec said:
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
Click to expand...
Click to collapse
It's a usb brick, not a plain brick: when you plug it to pc the phone usually doesn't even light up the led.
sorry, i read that he had full use of his phone bar the SD card
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
Click to expand...
Click to collapse
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
hi, still me sorry for spamming, just found a nice TUT using gparted on xda http://forum.xda-developers.com/showthread.php?t=535914
fragargon said:
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
Click to expand...
Click to collapse
Fixing misc doesn't take more than a minute if you have a working adb...repartitioning micro sd card takes loads of time instead, especially if it's big, coz you have to backup all of your data then copy them back, and that's a pain, especially if the sd isn't very fast.
Anyway you might be right there, just the other day a guy had a similar issue caused by multiple ext partitions not being recognized properly. I just thought it was a usb brick coz it's very common since the new gb sense roms rolled out and people started partitioning like crazy with cwm (which really SUCKS at that), and this either cause misc corruption or messed partitions on sd card: i'd suggest everyone to partition with amon them flash back any 3.0+ cwm to flash the rom, if you don't have the chance of using linux live cd (but you really should).
All sorted --------- RESLOVED !!!!
Okay Listen all Desire Owners-- I was able to fix this USB brick without having to go through all which was available on internet..
What I did -
1) Came home and formatted my EXT4 to ext3 and simply reflashed cm7 rom
All worked like charm - Now My SD card is mountable and works perfectly
Good for you
Anyway make sure you set up adb properly on your pc, it will save your life some day: it takes a while but it's worth it...i wouldn't get inti the rom flashing thing without it. Just a suggestion
Bests.
k i have a Evo 4g and i was flasing a rom and now the rom doesnt load... just the lockscreen apears then the phone restarts....i did a nandroid back up and tried to restore the back up and same thing happens...
i formated everything and even the sd card and i have that same problem... i also get the 5 vibrates and green light problem sometimes... i have recovery...
what should i do flash PA36IMG.zip from hboot???
What ROM was it?
Did you totally wipe EVERYTHING (Except the SD Card)
it was the mikg 2.1 +3.0 rom... yes i wiped everything except the sd card...
whats weird is the lock screen shows up then just restarts and keeps doing it....
baronsamedi said:
k i have a Evo 4g and i was flasing a rom and now the rom doesnt load... just the lockscreen apears then the phone restarts....i did a nandroid back up and tried to restore the back up and same thing happens...
i formated everything and even the sd card and i have that same problem... i also get the 5 vibrates and green light problem sometimes... i have recovery...
what should i do flash PA36IMG.zip from hboot???
Click to expand...
Click to collapse
First of all, go back into recovery and wipe everything in the wipe menu except the SD card and then flash a 'rooted' stock rom (whether ODEX or DE-ODEXED is irrelevant). A link is in my signature. If you can successfully flash a stock rom then it is safe to assume that your current rom is corrupted somehow. Also, what radios & kernel are you using with your current rom? Are they compatible?
i almost feel like when the rom tries to read the sd card it restart..... i did switch sd card same problem
dougjamal said:
First of all, go back into recovery and wipe everything in the wipe menu except the SD card and then flash a 'rooted' stock rom. A link is in my signature. If you can successfully flash a stock rom then it is safe to assume that your current rom is corrupted.
Click to expand...
Click to collapse
k will try that now
baronsamedi said:
it was the mikg 2.1 +3.0 rom... yes i wiped everything except the sd card...
whats weird is the lock screen shows up then just restarts and keeps doing it....
Click to expand...
Click to collapse
Try downloading and flashing the Synergy rom. It is almost the equivalent of the one you were trying to flash. Let us know if you are successful or not. Disregard my previous post for now, please.
baronsamedi said:
i almost feel like when the rom tries to read the sd card it restart..... i did switch sd card same problem
Click to expand...
Click to collapse
It could be and that is why I always suggest a re-partitioning & re-Formatting of SD cards from time to time. Do you happen to have an ext4 partition set up on your card?
dougjamal said:
It could be and that is why I always suggest a re-partitioning & re-Formatting of SD cards from time to time. Do you happen to have an ext4 partition set up on your card?
Click to expand...
Click to collapse
no i dont think i did.. i might of just formatted it loaded up the rom... should i back it up and Format it??
baronsamedi said:
no i dont think i did.. i might of just formatted it loaded up the rom... should i back it up and Format it??
Click to expand...
Click to collapse
If you are unable to install any other roms, then yes, back up the contents of your card and then, especially if your recovery is amonRA v2.3, re-partition it while in recovery. You should see 'Partition SD card' in the recovery's menu. You will be asked to set a size for the SWAP, ext2 and FAT. If you want to simply have use of the entire card as a FAT, enter 0 for the SWAP & the ext2 partition. If you have lots of 3rd party apps and you plan on installing a rom like Synergy or it's equivalent, you may want to set up an ext3 partition. If you plan to use a Synergy-like rom, I 'suggest' you set up an ext3 partition in this manner:
0 for SWAP
either 1024 or 2048 for the ext2
the rest for FAT and after the process is complete, select 'upgrade ext2 to ext3'. All of this is done from within recovery.
Afterwards, go to the wipe menu and wipe everything in it including the card. Then copy a freshly downloaded copy of the rom you want to use and then flash it.
i tried that.... now the sd card dont want to mount or format... and Synergy rom is doing the same thing it boots to the lock screen the reboots..
If it were me, at this point, I would run the RUU for your phone and then click on this link and follow my guide.
http://forum.xda-developers.com/showpost.php?p=16013428&postcount=45
by ruu do you mean 3.70.651.1 PC36IMG.ZIP and do i flash it in recovery or hboot?
baronsamedi said:
i tried that.... now the sd card dont want to mount or format... and Synergy rom is doing the same thing it boots to the lock screen the reboots..
Click to expand...
Click to collapse
Baron, are you still S-OFF? If you are and if you don't think you need to re-flash your recovery, then I agree with HipKat that you need to flash the ruu. If your hboot version is 2.02/2. 10 then yes, flash the ruu with software 3.70.. If you have a Windows computer, you can download the exe version, connect your device to your pc and then run the exe. You can download either version from the link in my signature.
Posting & replying from my EVO 4G
i am still s-off... with h-boot v 2.10.0001
and im download exe version of RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15. 00.11.19_NV_1.90_release_161482_signed.exe now... get back to you soon
If the .exe version doesn't work, then give the PC36IMG version a try. I've used that one and it works well.
i run the app and its giving usb connection error at what state does my phone have to be it for this to work?? im in recovery mode right now... htc recovery..
HipKat said:
If the .exe version doesn't work, then give the PC36IMG version a try. I've used that one and it works well.
Click to expand...
Click to collapse
i run it in hboot???
Yep. Make sure it's called PC36IMG.zip and when you boot to Hboot and it does it's scan and asks if you want to update, say yes.
Be ready to flash recovery right after that, btw, so you'll have to get the PC36IMG for recovery on your disk after Hboot Runs RUU. Just let it boot up, if it will and then try to connect to your computer, and swap out the PC36IMG's
i flashed the ruu then Amon_RA-supersonic-v2.3 recovery and it just does the same thing boots to look screen after a few secs it reboots. and sometimes it get stuck at a black screen and green blinking light.. then i have to pull the battery...
http://www.youtube.com/watch?v=hhUSZfFld-U
hi,
i have a desire with amoled screen, s-off, cm7r2.
yesterday some google programs started to give error and fc. then i restart my phone but it didnt open. then i try to delete dalvik cache and try to reboot but same. after that i try to restore backup, however it freezes at some place while restore.i tried also install new rom, but it freezes at some place again. how can i handle the problem? do you have any suggestion?
polatkanfatih said:
hi,
i have a desire with amoled screen, s-off, cm7r2.
yesterday some google programs started to give error and fc. then i restart my phone but it didnt open. then i try to delete dalvik cache and try to reboot but same. after that i try to restore backup, however it freezes at some place while restore.i tried also install new rom, but it freezes at some place again. how can i handle the problem? do you have any suggestion?
Click to expand...
Click to collapse
May be a motherboard fault, or a broken ext partition. Do you use an ext partition?
yes, i have ext3 1gb... i try to partition sd card again via clockworkmod, it says done but nothing change. data inside it exist still. and problem continues.
polatkanfatih said:
yes, i have ext3 1gb... i try to partition sd card again via clockworkmod, it says done but nothing change. data inside it exist still. and problem continues.
Click to expand...
Click to collapse
Partition it again using the guide in my sig.
Clockworkmod recovery cant partition very well so that could be ur problem like abaaaabbbb63 says, change ur recovery to 4ext recovery and then partition ur sdcard with abaaaabbbb63 guide.
thanks for all, i tried format my sd card in linux with gparted but it always gave error. in windows, i can see the files inside it but cannot copy or open them. i tried to format in windows but it says "windows unable to format the card". evetually, i bought new card, format it and it worked. now, my broken card is 32 gb class 10 samsung, i dont want to throw it. how can i fix it? any suggestions?
Odp: my desire doesnt open
polatkanfatih said:
thanks for all, i tried format my sd card in linux with gparted but it always gave error. in windows, i can see the files inside it but cannot copy or open them. i tried to format in windows but it says "windows unable to format the card". evetually, i bought new card, format it and it worked. now, my broken card is 32 gb class 10 samsung, i dont want to throw it. how can i fix it? any suggestions?
Click to expand...
Click to collapse
Try to repartition it using 4ext recovery.
Sent from my HTC Desire using xda premium
So hi there, i am going to give as much detail as possible so that hopefully someone can help me as i know NOTHING about rooting phones or any of the jargon. So please be patient.
SO...
Bought an HTC desire from gumtree here in the UK about 3 months ago not knowing it was a rooted phone, when the phone started it used to say RC MIX and i know it was on RUNNYMEDE, but i have bno idea which version.
Sadly the SD card has gone BUST leaving me with a hanging screen on the boot screeen (not the white HTC screen but the BEATS screen after the white screen)
SO after ALOT of googling i came across the RUNNYMEDE tutorial and download with had the stable and beta versions so i downloaded the stable version.
Heres where things got a bit funny for me.
After transferring the Runnymede ZIP file to the 4gb sd card and doing the doing the partion ext4 thing it will not allow me to install from zip as it does not find the ZIP file after doing the partition, although before doing the partion the ZIP file showed file in EXT4 recovery. SO me being me i just reformatted the sd card to FAT32, the put the ZIP file onto card and installed runnymede using the installer which al went well.
Then i Transferred the files from sd to PC, Partitioned the SD card and put the stuff BACK onto the SD card from PC.
Sadly none of this has worked for me and ia m at a total loss.
Bravo PVT3 SHIP S-off
HBOOT-6.93.1002
MICROP-051d
TOUCHPANEL-SYNT0101
RADIO-5.09.00.20
ANY help would be great and if any moreinfo is needed PLEASE just ask.
Thanks for your time
Partitioning ur sdcard wipes it clean, thats why zip file aint there. So partition ur sdcard again, 1gb (1024) ext4 then copy the rom zip to sdcard, then go to wipe/format and press format all partitions except sdcsrd then flash the rom. Should boot fine then.
Maybe update radio to latest version from here
tom0769 said:
Maybe update radio to latest version from here
Click to expand...
Click to collapse
Huh?
Thanks for the answers. In the end i went to the top of this forum to troubleshooting and used the TUT and installed Cryro, which is now working great on the phone.
I just need one more teeny bit of help if possible.
Now my SD card is registering as DAMAGED, which its not lol and will not mount (it is fat32 formatted and has zip files for crya mod and runnymede, that is ALL) Can i just format the sd again? Will thephone still run or are there files needed for the phone to boot on the SD card?
I have NO android market app and need it soooooooo bad.. whats the quickest way to get it on there... cheers again.
Totalneewb said:
Thanks for the answers. In the end i went to the top of this forum to troubleshooting and used the TUT and installed Cryro, which is now working great on the phone.
I just need one more teeny bit of help if possible.
Now my SD card is registering as DAMAGED, which its not lol and will not mount (it is fat32 formatted and has zip files for crya mod and runnymede, that is ALL) Can i just format the sd again? Will thephone still run or are there files needed for the phone to boot on the SD card?
I have NO android market app and need it soooooooo bad.. whats the quickest way to get it on there... cheers again.
Click to expand...
Click to collapse
For runnymede rom u need to make a partition on ur sdcard for the rom to work, because of the size of the rom. So if uv anything on ur sdcard u want to keep then copy it to pc. Now we have to partition ur sdcard, so boot into recovery,
go to tools and choose partition sdcard,
then choose remove all partitions and start from scratch,
then choose 1024,
then press skip then skip again,
it will then ask to choose ext3 or ext4? Choose ext4.
When its finished go to main menu and choose
wipe/format then format all partitions except sdcard.
Once thats done, copy runnymede rom back to sdcard then install the rom and once thats done reboot. First boot will take up to 10 mins so dont pull battery after 5 haha. Theres a guide here on xda by abaaaabbb on how to partition sdcard if u get stuck but ul be fine if u just follow my instructions.
jmcclue said:
For runnymede rom u need to make a partition on ur sdcard for the rom to work, because of the size of the rom. So if uv anything on ur sdcard u want to keep then copy it to pc. Now we have to partition ur sdcard, so boot into recovery,
go to tools and choose partition sdcard,
then choose remove all partitions and start from scratch,
then choose 1024,
then press skip then skip again,
it will then ask to choose ext3 or ext4? Choose ext4.
When its finished go to main menu and choose
wipe/format then format all partitions except sdcard.
Once thats done, copy runnymede rom back to sdcard then install the rom and once thats done reboot. First boot will take up to 10 mins so dont pull battery after 5 haha. Theres a guide here on xda by abaaaabbb on how to partition sdcard if u get stuck but ul be fine if u just follow my instructions.
Click to expand...
Click to collapse
Thanks but as i said i have given up on runnymede and installed cyanogenmod which is working great i can make calls and texts no worries now .
My only issues now are the ones i said above
Cheers for the help from a fellow scot lol (well you have the scottish flag)
Totalneewb said:
Thanks but as i said i have given up on runnymede and installed cyanogenmod which is working great i can make calls and texts no worries now .
My only issues now are the ones i said above
Cheers for the help from a fellow scot lol (well you have the scottish flag)
Click to expand...
Click to collapse
haha i am scottish, just living in ireland now. just so u know, if u plan on changing roms them ur probably gona have partition ur sdcard at some point.
Anyway.. so what do u want now? playstore? so with cyanogenmod roms u need to flash g'apps (google apps) in recovery. what cyanogenmod rom did u install?