Can Someone extract the Wifi Calling apk so i can use it with CM 6.1 on the G2? When i Flashed over, I lost Wifi Calling..
You're going to need kineto_gan.ko as well as the APK, I had them copied over to CM6.1 when I installed it.
Did you make a nandroid backup before flashing? Just restore, grab the two files you need then restore back to CM6.1 and copy them in? Posting them here would make them Warez and they'll get pulled.
Does your phone detect your mobile number correctly? Mine never did. Caused a few "irregularities".
Wifi calling seemed to work though.
Quick question... when the wifi calling app keeps force closing, what does that usually mean? It's still connected to the network because of the other wifi bars, but the icon in the left hand corner is gone.
Related
A good friend of mine waited to receive the OTA update of Froyo for his Incredible and when he got it he installed it. The bad part that I need help with is that when his phone rebooted it wouldn't allow the 3G data network to work. That section in settings is greyed out saying "Turning on..." and will not connect. The phone portion runs just fine. I have since returned the phone back to 2.1 and the same problem persists. If someone could help us out that would be awesome!!!
This probably wasn't posted in the right section...
I had an issue with 3G not connecting after downloading the froyo OTA off the internet and applying it as an update.zip.
I'm not sure if this is the same thing, but mine seemed to be that it wouldn't switch from the wifi network to the 3G network after getting out of range of the wifi (its set to auto connect to my home wifi, so it went straight to that after I rebooted it after the update). Then it wouldn't connect with the wifi off. I think I turned off both wifi and 3G and rebooted it with them off, and then turned back on 3G, and it worked. Everything is working normally now.
I'm not really sure why this would happen, I was wondering if it possibly had something to do with the phone registering itself after the update, and then not registering the 3G because it was on wifi and sort of "forgot?" That's just idle speculation though...
Also you might want to clear out your cache.
This might not be related to your problem, but I hope it helps!
LordCaptain said:
This probably wasn't posted in the right section...
I had an issue with 3G not connecting after downloading the froyo OTA off the internet and applying it as an update.zip.
I'm not sure if this is the same thing, but mine seemed to be that it wouldn't switch from the wifi network to the 3G network after getting out of range of the wifi (its set to auto connect to my home wifi, so it went straight to that after I rebooted it after the update). Then it wouldn't connect with the wifi off. I think I turned off both wifi and 3G and rebooted it with them off, and then turned back on 3G, and it worked. Everything is working normally now.
I'm not really sure why this would happen, I was wondering if it possibly had something to do with the phone registering itself after the update, and then not registering the 3G because it was on wifi and sort of "forgot?" That's just idle speculation though...
Also you might want to clear out your cache.
This might not be related to your problem, but I hope it helps!
Click to expand...
Click to collapse
Thanks for your effort, it did not work unfortunately.
Did he happen to have anything that controls 3G installed? Tasker? Juicedefender?
If he powered off while the data we disabled, and updated, then 3G won't work. Period.
I've heard of ways of restoring the APN or something, search the forums on that.
gmichaelow said:
Did he happen to have anything that controls 3G installed? Tasker? Juicedefender?
If he powered off while the data we disabled, and updated, then 3G won't work. Period.
I've heard of ways of restoring the APN or something, search the forums on that.
Click to expand...
Click to collapse
He did not have any type of app like that. He is a very novice user. I tried searching for restoring APN with no luck, anyone else?
When I first flashed Virtuous2.0 and did the initial setup, I didn't get 3G either. I'm pretty sure a good old fashioned *228 did the trick. I did have a backup through APN Backup & Restore, but didn't need to use it.
Have you tried turning on the airport mode, rebooting, turning off airport mode. Or perhaps do a *228?
enomele said:
When I first flashed Virtuous2.0 and did the initial setup, I didn't get 3G either. I'm pretty sure a good old fashioned *228 did the trick. I did have a backup through APN Backup & Restore, but didn't need to use it.
Click to expand...
Click to collapse
Tried it and no luck.
cooksalot said:
Have you tried turning on the airport mode, rebooting, turning off airport mode. Or perhaps do a *228?
Click to expand...
Click to collapse
Tried this too and no luck.
Go to Verizon and tell them to fix it fix fix it fix it! If he's running stock its nothing he did. Sounds super bunk that they finally got froyo only to not be able to use 3g.
The loss of 3g data is a bug with the froyo builds. All the froyo roms and the official ota have this issue.
sent from my Droid Incredible using XDA app.
this just happened to my friend too. I updated his phone last week with the OTA and since then he hasn't had 3g, but wifi would work.
did a rom manager backup before hand though, so i told him to revert back, and everything is working again. not sure why flashing back didn't work for you
So he hasn't had 3g at all? He can make calls and a *228 option # 1 doesn't update his settings and reboot? Maybe something when wrong on the install, whats hboot say?
Assuming he's completely stock I'd suggest going to the Verizon store and having them try.
Well.
Rooted/Rom'd/Kernel'd my phone earlier today, went just fine (netarchy 421more beta, ava v10).
Only problem is when i wifi tether, the 3rd party apps won't work. Sprint's hotspot works fine but when i try to connect with barnacle/a couple others it connects, then about 10 seconds after connected i lose internet access, but the wireless signal is still being recieved. I fiddled with settings etc and no luck.
Sprint's stock app works fine, and 3g tether is my primary connection source as i live in the middle of nowhere (good for everything but fps games, 200ping not cool). My connection shows 3 {+/-1} bars most of the time, speeds top out at 200kb/s dl. If i use sprint's hotspot app in my rooted phone do i still have to pay 30$/m for the hotspot service?
i don't recall any outside links in my post. (edit, declares all (at) symbols outside links.)
edit; lack of responses. easier question; Does a rooted phone using sprint's hotspot app still have to pay 30$/mo for use of it?
[Galactus] said:
Well.
Rooted/Rom'd/Kernel'd my phone earlier today, went just fine (netarchy 421more beta, ava v10).
Only problem is when i wifi tether, the 3rd party apps won't work. Sprint's hotspot works fine but when i try to connect with barnacle/a couple others it connects, then about 10 seconds after connected i lose internet access, but the wireless signal is still being recieved. I fiddled with settings etc and no luck.
Sprint's stock app works fine, and 3g tether is my primary connection source as i live in the middle of nowhere (good for everything but fps games, 200ping not cool). My connection shows 3 {+/-1} bars most of the time, speeds top out at 200kb/s dl. If i use sprint's hotspot app in my rooted phone do i still have to pay 30$/m for the hotspot service?
i don't recall any outside links in my post. (edit, declares all (at) symbols outside links.)
edit; lack of responses. easier question; Does a rooted phone using sprint's hotspot app still have to pay 30$/mo for use of it?
Click to expand...
Click to collapse
ok, so your using barnacle to do you tethering. Unless sprint hotspot is unlocked with calkuins hack, then yes you will have to pay for the tethering using, i believe it wont work if havent already paid for the feature. I suggest checking back with the Original Poster's ROM thread. Try using wireless tethering! the best out there, try this link
http://code.google.com/p/android-wifi-tether/downloads/list
Note: all the PRE-releases are EXPERIMENTAL, and can cause Fcs (force close) so if you dont feel comfortable with a pre-release, dl a stable set, ex: 2.02 (something like that) give me back results if this works for you bro.
ava v10 came with the latest version of that, i don't understand why it isn't working correctly.
I can connect/recognize but as soon as i try to load a page it goes using that.
That'd be with 100% signal strength + connected and "no internet access"
[Galactus] said:
ava v10 came with the latest version of that, i don't understand why it isn't working correctly.
I can connect/recognize but as soon as i try to load a page it goes using that.
That'd be with 100% signal strength + connected and "no internet access"
Click to expand...
Click to collapse
ava 10....haha, ok. The sprint hotspot it hacked. Whatcha do is:
1)activate wireless tethering, and sprint hotspot should activate too.
2)connect to your wireless tethering, not the hotspot,then turn off wireless tethering, and your pc will lose the connection.
3)try turning wireless tethering back on, and connect as fast as possible. It should go through this time. Happens to me and a few others that run roms with calkuin's tether hack.
Report back with result.
if you need more help, you can contact me via Talk. (gmail account)
easier way to communicate.
[email protected]
yeah... that didn't work either, do you know of a way to unlock sprint 3g hotspot/wifi tether without changing to his rom?
otherwise i'll just load his up as i don't really have another option...
[Galactus] said:
yeah... that didn't work either, do you know of a way to unlock sprint 3g hotspot/wifi tether without changing to his rom?
otherwise i'll just load his up as i don't really have another option...
Click to expand...
Click to collapse
well lets fix this, you are new right? what kind of rom are you wanting so i can give you the link to a good rom.
Just look for MIUI 11.12 or 11.19
Virus base and Virus Anthrax series
also FRESH
Myn's WARM twopointwo
and another good rom is CM 6.1
last but not least Ultimate Droid
I've done several Google searches on this topic as well as focused searches on the CM and XDA forums; I figured it was time to just ask the question myself.
So I noticed that Wifi Calling started missing in in the CM7 nightlies sometime after #21. I ran across someone from the CM forums who saw theirs returned after his upgrade from #28->#30 (which I did not see on mine even after a full wipe).
Is there a setting or condition on my phone that prevents me from seeing/activating this feature?
Thanks in advance,
Reg
I've been running CM7 since build number 0 and now I'm on build 31, I have flash every nightly released and have always had wifi calling on every single build.
Sent from my HTC Vision
joemm said:
I've been running CM7 since build number 0 and now I'm on build 31, I have flash every nightly released and have always had wifi calling on every single build.
Sent from my HTC Vision
Click to expand...
Click to collapse
So I did a clean install of #21, which had wifi calling, but when I upgraded to 22, it was gone. Might anyone else know what I can do to install?
Thanks,
When you are upgrading, what are you wiping? You only need to wipe cache.
Sent from my HTC Vision
joemm said:
When you are upgrading, what are you wiping? You only need to wipe cache.
Sent from my HTC Vision
Click to expand...
Click to collapse
I've tried multiple things: cache wipes, no wipes, "clean" installs, manually formatting each mount point. None of that matters for me. Wifi calling only shows up in builds up-to-and-including 21; after that, it just vanishes.
Thanks for trying though, dude.
As i installed the CM 7.0.0-RC1 with Nightly version 2. and i found the same thing means WIFI is not working but when i press the power button and found the option REBOOT and select this option and then again i select the option REBOOT, Phone rebooted and then turn on wifi and it started working. so all you have to do is to Reboot the phone as i said. you will hopefully find your WIFI option working.
as i had the same.
wasie said:
As i installed the CM 7.0.0-RC1 with Nightly version 2. and i found the same thing means WIFI is not working but when i press the power button and found the option REBOOT and select this option and then again i select the option REBOOT, Phone rebooted and then turn on wifi and it started working. so all you have to do is to Reboot the phone as i said. you will hopefully find your WIFI option working.
as i had the same.
Click to expand...
Click to collapse
Yes, it is well known that a first reboot is required to get WiFi working on CM7 right now. OP's question, however, is about the missing WiFi calling application.
OP, that's very interesting that it won't show up. So if you do a clean full wipe and install of something like RC1 or higher, you still don't get WiFi calling? Mine has been in there on every build... hmm..
I did'nt Wipe the Cache , I did the reset factory settings option. and install the CM7.0.0-RC1 with nightly version 2. and after done i found the wifi option is not working.
as i told when i rebooted the phone and i found the wifi option working.
Do you have a g2 or a desire z? I am looking at the changelog right now and it says that wifi calling is only installed on the g2. I'm assuming that you have a g2 since you are asking about it, but just throwing my 2 cents.
Maybe the rom is thinking that you are running a Z instead of a G2. Idk. It might help. More than likely not, but it's worth saying IMO.
martonikaj said:
Yes, it is well known that a first reboot is required to get WiFi working on CM7 right now. OP's question, however, is about the missing WiFi calling application.
OP, that's very interesting that it won't show up. So if you do a clean full wipe and install of something like RC1 or higher, you still don't get WiFi calling? Mine has been in there on every build... hmm..
Click to expand...
Click to collapse
I know what you are saying . but i tried everything after that i said so that wifi calling is working. as you find the WIFI connection then go the wifi calling app and then enable it and connect to tmobile network so that you can use it. but if you are in such area where Tmobile network's service is bad then might there be a chances to have no connection with wifi calling even if you have connected to wifi network (Internet)
wasie said:
I know what you are saying . but i tried everything after that i said so that wifi calling is working. as you find the WIFI connection then go the wifi calling app and then enable it and connect to tmobile network so that you can use it. but if you are in such area where Tmobile network's service is bad then might there be a chances to have no connection with wifi calling even if you have connected to wifi network (Internet)
Click to expand...
Click to collapse
now i am store working and i have a wifi at my job too. so i connect there carefully once again and checked everything and when i open to the wifi calling app and connect to T-Mobile Network for wifi calling i see after connecting to Tmobile via wifi radio signals turn to zero and when i disconnect it singals first had a 'x' on it and then they turn green. so make sure you are using the tmobile network then you will be able to use wifi option.
I have previously used the Haxpresso ROM to make wifi calls because i get absolutely zero service where i live. I noticed the cm7 has wifi calling. But cm7's wifi still doesnt work for me even after RC4 and flashing the new radio. Bascially, i want a cyanogen rom with wifi calling. if you can help me install it in cm6 or get a permanent wifi fix for cm7, i will worship the ground you walk on. Please, i hate stock espresso. i want some CM goodness!
I haven't heard any news of people getting Wifi Calling to work with CM6.
Maybe you wanna just keep trying different Nightly's? Also, I didn't think my wifi was working either, but I restarted my phone with wifi on and after... well I think a while it started to pick up on networks.
do the wifi .lib files adapt over time? like, with multiple reboots, would the wifi problem eventually fix itself?
Hey guys, I just recently updated to sense 3.0 and immediately after my phone will show 3g then it will drop to 1x then soon after it shows no data connection. If I try to open an app that uses data like the market it tells me there is no connection, some apps tell me to check and make sure I am not in airplane mode. Then randomly 3g will kick back on for a bit then it will cycle back through 1x and no data again. I also cant tether anymore either.
I reverted back to the stock rom backup (only root no other changes) and now my signal does the same thing. I have no way to get data now and its super frustration.
Things I have tried..
Calling Verizon (solution is warranty replacement)
*228 (does nothing)
Bringing back a known working backup (does nothing)
Restart/Battery pull (nothing)
Putting it in and out of airplane mode (nothing)
I am currently downloading 2 different roms and the newest radio and I will try and flash those and see if it works.
Any thoughts?
Thanks!
http://forum.xda-developers.com/showthread.php?t=1190292
AgalychnisCallidryas said:
http://forum.xda-developers.com/showthread.php?t=1190292
Click to expand...
Click to collapse
flawless, thank you so much