Develop Bugs

[ROM][T-Mobile UK] Official I9000BOJS5

This is the Froyo 2.2.1 T-Mobile UK official firmware.
I have divided the firmware into 3 files to allow re-partitioning and mixing, no bootloader is included.
I9000BOJS5
PDA: BOJS5
Modem: XXJPY
CSC: TMUJS4
Multiupload link: Download (147.2 MB) (7zip SFX, Double-Click to extract)
Good luck flashing your device

Thanks, this might come in handy.

1.unrar I9000BOJS5
2.Open ODIN. (And close Kies, if you have it open. It is important to have ODIN open BEFORE connection the phone via USB!)
3.Select the PDA, Phone, CSC file in Odin.
4.Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power.
5.Connect your phone with your computer and wait until the drivers are installed.
6.When the drivers are installed, click Start.
7.The phone will be flashed and once it’s finished, it will boot up. (Do NOT disconnect the usb-cable, remove the battery or otherwise interrupt this process!)
8.You have successfully flashed your phone.
ODIN + PIT -Download Link1 or Link2
All CSC Download Link1 or Link2
I9000BOJS5 Download Link1 or Link2

Anyone has original bootloaders of this fw version? i need them. Also fullfw with bootloaders can do.

BogdanSNB said:
1.unrar I9000BOJS5
2.Open ODIN. (And close Kies, if you have it open. It is important to have ODIN open BEFORE connection the phone via USB!)
3.Select the PDA, Phone, CSC file in Odin.
4.Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power.
5.Connect your phone with your computer and wait until the drivers are installed.
6.When the drivers are installed, click Start.
7.The phone will be flashed and once it’s finished, it will boot up. (Do NOT disconnect the usb-cable, remove the battery or otherwise interrupt this process!)
8.You have successfully flashed your phone.
ODIN + PIT -Download Link1 or Link2
All CSC Download Link1 or Link2
I9000BOJS5 Download Link1 or Link2
Click to expand...
Click to collapse
Bogdan...make your own damn thread...why u need to post here?

[GUIDE][PRO DUOS] Recover B5512 from soft brick using ODIN

I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware (search on http://www.mod2xtreme.com/ or http://forum.xda-developers.com/showthread.php?t=1656825)
All credits go to manoranjan2050 for his great work in uploading the firmware for all the samsung galaxy y devices!
Go here to find the firmware package for the y pro duos
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
Info:For Save Use Do Not Use Boot loader and pit file. Do this only if everything else failed!
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:

Carlovn said:
I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware
Searching the web for a complete firmware pack I found this forum:
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:
Click to expand...
Click to collapse
Nice explanation..
1. Suggestion..
Add "[GUIDE]" to your thread name.. It helps to identify what it is in mobile xda app.. and change mobile name to galaxy y variants.. As i suppose your guide covers both y duos and y phones... And lastly add link to manoranjan2050's thread (link)who is doing great work of providing all latest stock firmware updates to both duos of galaxy y.. So anyway good info..
hit thanks button! If above post helps you..
Sent from my GT-S6102

Uploading Odin Pack For Galaxy Y Pro Duos User................. 23% With 23-30 kbps Internet...........
Info:For Save Use Do Not Use Boot loader and pit file........:good::good:
U Can Also Find My Thread/Post @ http://www.mod2xtreme.com

Thanks for the suggestions and heads up guys! Will change those things.
And I will name manoranjan2050 for the credits!

Carlovn said:
Thanks for the suggestions and heads up guys! Will change those things.
And I will name manoranjan2050 for the credits!
Click to expand...
Click to collapse
dude the download link dosnt work..

Thaks for the great guide. In Nitubhaskar's compact kernel thread for our device he gave advice on how to flash stock kernel and recover from soft brick in case you brick phone while flashing custom kernel. Can you add some of that info here and credit the appropriate persons? It would be great to have all relevant soft brick info for our device. Yor thread is dedicated to recovering from soft brick and so would be the best place to have all the facts in one piece
Sent from my GT-B5512 using Tapatalk 2

Carlovn said:
I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware (search on http://www.mod2xtreme.com/ or http://forum.xda-developers.com/showthread.php?t=1656825)
All credits go to manoranjan2050 for his great work in uploading the firmware for all the samsung galaxy y devices!
Go here to find the firmware package for the y pro duos
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
Info:For Save Use Do Not Use Boot loader and pit file. Do this only if everything else failed!
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:
Click to expand...
Click to collapse
LINK is not working b5512 stock framework

sphoenixp said:
LINK is not working b5512 stock framework
Click to expand...
Click to collapse
yes.. seems links are not working.. but a quick search on google gave me these links.. i dont have phone.. so cant test it..
Link
Another link

Carlovn said:
I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware (search on http://www.mod2xtreme.com/ or http://forum.xda-developers.com/showthread.php?t=1656825)
All credits go to manoranjan2050 for his great work in uploading the firmware for all the samsung galaxy y devices!
Go here to find the firmware package for the y pro duos
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
Info:For Save Use Do Not Use Boot loader and pit file. Do this only if everything else failed!
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:
Click to expand...
Click to collapse
Hi, I have not used odin before, but my phone (B5512 galaxy y pro duos)
has a firmware from another country and I want to have my own
(because then I can write in my language). I have downloaded a file which
has "modem"," csc" and "pda" files only and it's the firmware other people
from my country have (B5512XXLF2) . I think my phone has Polish firmware (B5512XXLL1)
while I want the Greek one. Also, these two types seem the same
(the only difference in the code is the year month and version)
but one has greek keyboard and the other doesn't, what's the deal with that?
Will this method work for me? If not can I recover my phone?
I have not done this before and the phone is less than a month old and I am scared!
Thank you.

Recovery via odin should be possible. As for flashing Greek firmware I recommend you talk to Deadly or another expert via PM before proceeding.
Sent from my GT-B5512 using Tapatalk 2

arbayong said:
Recovery via odin should be possible. As for flashing Greek firmware I recommend you talk to Deadly or another expert via PM before proceeding.
Sent from my GT-B5512 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the information, i will try to communicate with someone

No change
Ok, I flashed the phone with the firmware some other people from Greece had, but nothing has changed. I still don't have greek language on my physical keyboard. Can anyone help, please?

i wanna just update 5512 and i download rom for egypt and this rom one file ( one package)
where put md5 ? PDA or where ?
thnQ

Good work op,helpful explianation...

Where to download the original rom?

Where can I find & download the latest original ROM of the S3 T999 ( T-mobile). Thanks.

re: stock rom.
vietthanh1206 said:
Where can I find & download the latest original ROM of the S3 T999 ( T-mobile). Thanks.
Click to expand...
Click to collapse
Here is the latest original T999 S3 Touchwiz Jellybean 4.1.1 rom.
This is the stock Odin flash rom. http://www.androidfilehost.com/?fid=22940013536739731
You will need ODIN to flash it. http://d-h.st/Q14
It will not flash using CWM or TWRP
Good luck!

Misterjunky said:
Here is the latest original T999 S3 Touchwiz Jellybean 4.1.1 rom.
This is the stock Odin flash rom.
http://www.androidfilehost.com/?fid=22940013536739731
Good luck!
Click to expand...
Click to collapse
Do you have instruction for flashing it? or just flash like a normal custom ROM ?

re: instructions
vietthanh1206 said:
Do you have instruction for flashing it? or just flash like a normal custom ROM ?
Click to expand...
Click to collapse
Here is the step by step guide:
NOTE: you cannot flash it the same way as you would flash a custom rom.
After downloading it make a folder on your desktop and unzip the file
using Winzip or 7zip so the .TAR file is in the new folder you just made.
Here is a link for ODIN which is required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
Download and extract Odin into the same folder you made containing the TAR file.
Download the the stock T999 rom and extract the TAR file into a new folder on your desktop of the computer.
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!

vietthanh1206 said:
Where can I find & download the latest original ROM of the S3 T999 ( T-mobile). Thanks.
Click to expand...
Click to collapse
vietthanh1206 said:
Do you have instruction for flashing it? or just flash like a normal custom ROM ?
Click to expand...
Click to collapse
From your two posts I'm going to guess that you are rooted and have a custom recovery installed.
Here is the latest stock rooted 4.1.1 jellybean ROM for the T-Mobile Galaxy S3.
Just flash this rom as you would any other ROM.
http://forum.xda-developers.com/showthread.php?t=2128306
Sent from my SGH-T999 using xda premium

Misterjunky said:
Here is the step by step guide:
NOTE: you cannot flash it the same way as you would flash a custom rom.
After downloading it make a folder on your desktop and unzip the file
using Winzip or 7zip so the .TAR file is in the new folder you just made.
Here is a link for ODIN which is required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
Download and extract Odin into the same folder you made containing the TAR file.
Download the the stock T999 rom and extract the TAR file into a new folder on your desktop of the computer.
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
Click to expand...
Click to collapse
Hey man I downloaded your firmware but I can't extract it. Do you have anyother link or other built of it ?

re: zip file
vietthanh1206 said:
Hey man I downloaded your firmware but I can't extract it. Do you have anyother link or other built of it ?
Click to expand...
Click to collapse
Do a google search for 7zip it's a free utility for windows,
Download and install it so you will be able extract the TAR
file inside the zip.

Restore 8.4 to Stock

I followed this blog post line by line and it worked well.
http://nasirtech.blogspot.com/2014/02/t320ueu1anai-android-442-for-galaxy-tab.html
The longest portion is simply waiting for the file to download. The free subscription took about an hour. In case the blog was taken down or moved I thought I'd put it here for future use.
1. Download Android 4.4.2 XXDNA1 Firmware for Galaxy Tab Pro 8.4 T320 from the above list
Here
http://terafile.co/910f49cf635c/T320UEU1ANAI_T320XAR1ANAI_XAR.zip
or
http://www.sammobile.com/firmwares/3/?download=24949
2. Download Odin 3.07
3. Switch off your Tablet and boot Galaxy Tab Pro 8.4 T320 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Tab Pro 8.4 T320 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: T320XXDLJ5_T320ODDDLI7_INU.tar.md5)
9. Now, click on the Start button to begin the installation process, wait few moments.
10. Once completed, you would see “PASS!” message in ID:COM port having green background
Your Tablet should automatically reboot after completion. You can now disconnect your Tablet from computer
You are now un-rooted, running stock recovery and the Android 4.4.2
Hope this helps someone get all the information in one spot.
Oh yeah, Yes your Knox is still tripped. Don't think anybody has developed a fix or workaround for this yet.

Need help rooting Samsung Galaxy A11 5F

Hello,
I am sorry if this is annoying in any way. I have spent the whole day trying to figure out how to root my Samsung Galaxy A11 and already wiped it twice.
There is not TWRP custom recovery available for it. To my understanding so far, I need TWRP if I want to install custom ROMs. I really do not care about installing custom ROMs. I have been trying to figure out how to root using the stock ROM.
Everywhere I look it says that I need to patch the stock ROM before flashing it by patching the boot.img file in the stock ROM download. I have downloaded several GBs of ROMs over a very slow connection and none of them has the boot.img file. I have the tar.md5 files (AP, BL, CP, CSC) but not boot.img. How do I proceed in this situation?
My phone model: SM-A115F/DS
Baseband version: A115FXXU1ATG1
Country: Egypt
Any help will be much appreciated.

yomamabinlaggin said:
Hello,
I am sorry if this is annoying in any way. I have spent the whole day trying to figure out how to root my Samsung Galaxy A11 and already wiped it twice.
There is not TWRP custom recovery available for it. To my understanding so far, I need TWRP if I want to install custom ROMs. I really do not care about installing custom ROMs. I have been trying to figure out how to root using the stock ROM.
Everywhere I look it says that I need to patch the stock ROM before flashing it by patching the boot.img file in the stock ROM download. I have downloaded several GBs of ROMs over a very slow connection and none of them has the boot.img file. I have the tar.md5 files (AP, BL, CP, CSC) but not boot.img. How do I proceed in this situation?
My phone model: SM-A115F/DS
Baseband version: A115FXXU1ATG1
Country: Egypt
Any help will be much appreciated.
Click to expand...
Click to collapse
I have managed to find this saviour.
https://forum.xda-developers.com/showpost.php?p=79106875&postcount=6
I downloaded a random J6 firmware in another site.
You have to use 7zip software, it's free, much better than WinRar and supports tons of compression formats. Do these steps with 7zip:
-Unpack zip file.
-Rename the "*.tar.md5" to "*.tar".
-Open the ".tar" file and unpack "boot.img.lz4".
-Unpack "boot.img.lz4" file.
-It's done, you now have the "boot.img" file you were looking for
Click to expand...
Click to collapse
Just one thing to point out, 7zip did not work properly to extract the boot.img from boot.img.lz4. I used the solution in this answer. https://superuser.com/a/1533657
Now, let's see if I can patch the boot.img

How to ROOT and, but...
yomamabinlaggin said:
Hello,
I am sorry if this is annoying in any way. I have spent the whole day trying to figure out how to root my Samsung Galaxy A11 and already wiped it twice.
There is not TWRP custom recovery available for it. To my understanding so far, I need TWRP if I want to install custom ROMs. I really do not care about installing custom ROMs. I have been trying to figure out how to root using the stock ROM.
Everywhere I look it says that I need to patch the stock ROM before flashing it by patching the boot.img file in the stock ROM download. I have downloaded several GBs of ROMs over a very slow connection and none of them has the boot.img file. I have the tar.md5 files (AP, BL, CP, CSC) but not boot.img. How do I proceed in this situation?
My phone model: SM-A115F/DS
Baseband version: A115FXXU1ATG1
Country: Egypt
Any help will be much appreciated.
Click to expand...
Click to collapse
Hey there. I'm searchin' for TWRP for my A11 and no use.No one compile it and nobody can't write full f*****' guide how to build TWRP without any config file (or how to create 'em for building from 0). But honestly I'm not about TWRP.
Why do we need TWRP for Android 10!?
A: Samsung lock phones /system partition to Read-Only state. You can get root but you can't mount your partition as Read-Write, make changes in it. It's only waste of time.
How can I install ROOT for my samsung A**?
A: Very simple. I suggest you using Magisk Manager for it!
What do I need and what do I must do?
A:
1. You need unlock the bootloader of your phone (data will be lost).
2. You need original USB cable (from box of phone).
3. Yon need last firmware to your phone. (I'm using SamFirm or Frija)
4. Windows 7 or higher.
5. 7-Zip
6. Odin
How:
Stage I: Bootloader.
0. Remove all Google and Samsung Accounts
1. Make data backup (for recoverying)
2. Go to Settings -> Developer Options -> ADB Debug (set Enabled) (Search in web how to get Developer options Settings menu)
3. Go to Settings -> Developer Options -> OEM Unlock (set Enabled)
4. Turm off Phone and wait for 10 seconds.
5. Plug USB of Phone to your PC BUT PHON MYST BE UNPLUGGED!
6. Push and hold buttons: VOLUME UP and VOLUME DOWN and plug USB from PC to your Phone and still hold buttons!
7. When phon will be realy you'll see a light blue screen that ask you: Shall I unlock bootloader (Long press Volume UP), Shall I enter in download mode (short 'click' Volume Up) or I must turn off (Hold Volude Down)
8. Press and Hold VOLUME UP
9. On screen you'll se the message you'll unlock your bootloader... To hell Press POWER BUTTON.
10. Phone goes to reboot and start WIPING PROCESS!
11. That it. You unlocked bootloader. But will you install ROOT?
If so:
12. Make first setup of your phone but don't set google account and etc. Just make it working.
13. Go to Settings -> Developer Options -> ADB Debug (set Enabled)
14. Validate that's you've done everything right: Find OEM Unlock if toogle is gray and not responging to your actions then you've done right!
15. No download firware to your PC.
16. After you had downloaded firmware for your phone you'll fave few files you need file with prefix "AP_" open it with 7-Zip.
17. Get from it file: "boot.img.lz4" and put to some location at your PC.
18. Pack your "boot.img.lz4" with 7-Zip to "boot.img.lz4.tar" (YOU MUST USE *.TAR ARCHIVE TYPE)
19. Install Magisk Manager to your phone and put your archive "boot.img.lz4.tar" to location: Internal Memory/Download
20. Connect to WiFi and run Magisk Manager.
21. Make Kernel Patch with Magisk: Select: "Install Magisk" -> "Patch boot image" -> in file picker navigate and select "boot.img.lz4.tar"
22. (Magisk will do everything)
23. When it's done in folder "Internal Memory/Download" will be magisk_patched.tar copy it to your Windows.
24. (On PC) Run Odin as Administrator. And in tab "Options" unselect checkbox "Auto Reboot"
25. Turn off your phone and wait for 10 seconds, then Press and hold VOLUME UP and VOLUME DOWN and plug in your USB from PC to phone.
26. Phone will ask you what do need to do, just click VOLUME UP and you enter into Download mode
27. Odin must show you COM number.
28. Select as AP file "magisk_patched.tar" and press Start.
29. If you see PASS! in Odin - You've done! If ERR! then you failed to unlock the bootloader!
30. Now turn of fyour phone and enter into Recovery Mode (on turned off phone hold POWER + VOLUME UP)
30.a. If you failed to enter try in with ADB command: 'adb reboot recovery' (no quotes)
31. In Recovery Mode Make: Factory reset + Clear Cash partition.
32. Power on your phone. Again make FULL PHONE SETUP an reinstall Magisk Manager
33. PROFIT!