[Q] Bluetooth Headset - General Accessories

Hello,
I've got a problem: I recently bought a htc magician (used) and I always was using a bluetooth headset (hama, mono) for listening to music. Now, I was going to try it with the new htc magician but - it didn't work.
I must say I tried nearly everything. When I look for it with bluetooth, enter the authentification code for pairing, it works. Then WM asks me whether to use the device as headset - no problem until here.
But when I open up the "Audio"-Tab in the bluetooth settings, the headset is not in the list - I cannot listen to music.
I already tried using BTAudio. I hear the normal operating sound, but no music, no rings, nothing at all. It is all by the device itself, which is particularly.... bad in the subway or somewhere else in public places.
Now, until this point, I really thought that microsoft WAS able to build a system that works, which I see not confirmed right now.
I must say that I have an IQ of more than 130, and I build programs since I am 5 years old, but somehow, this is something you need to be god himself - or bill gates. Shouldn't have bought one of these.
What can I do to listen to music, finally (I could actually buy an mp3 player for 40 Bucks, but I would like to listen on my bike too, which is rather... unpracticable when having a cable almost strangling you).
Well, so I need your help.
I will NOT:
1. Change anything at the ROM of my device
2. Buy a new HTC
3. Change my opinion about Windows
4. Pay attention to ANY COMMENTS ABOUT MY NICK!
Thank you in advance

Related

Bluetooth Headphones Problem

I have an O2 XDA Mini S and have just purchased a pair of Motorola HT820 Bluetooth headphones. I have paired the two; however, I only get the Hands Free service (which works) but NO Wireless Audio. I have not installed any other software / drives and I am using WMP 10 Mobile to play the music.
Any help with this problem would be very much appreciated.
Thanks, Harold Clements
...Ok, I have been on this for about 4 hours now and I am starting to get a bit annoyed.
I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think I should also have ‘Set as Wireless Stereo’ or something, but I don’t.
Please, has anyone any ideas?
Thanks, Harold Clements
Wirless Audio Hacks
I really could do with someone’s help!
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am unsure:
a) if this is a solution to for problem / PDA.
b) what a hack is and why is it needed?
Please can someone help!
I don't know wich kind of PDA you have, as you can see everyone here calls their PDAs by their HTC's code name (mine is a universal), go to look the pictures of all the PDAs, find yours and search directly inside there, it will be much easier for you to find an answer.
One simple comment, your PDA has to have the Bluetooth high quality audio (is called be some PDAs in this way), see if your PDA does contain such feature, you have to activate it if you want to hear stereo audio, generally when you pair your phones for the first time, your PDA will show you the option already ticked, if you haven't see it, chances are that something is missing in your bluetooth profiles, go to your PDA's specific part of this forum and read, with patience and some luck, I'm sure you'll find whatever you need to get your PDA's stereo audio to work.
Most of the cases, are just the lack of the profiles or even installing another BT stack.
good luck
Thanks...
Thank you very much for your advice / reply, it was very much appreciated. It seems that my PDA is a Wizard. I will indeed search that part of this forum.
Thanks again,
Harold Clements
I don't think your phone supports A2DP profile. Correct me if I'm wrong.
Neither do i know if his phone supports it, I use to have an Ipaq 6340, it suppose that it didn't supported A2DP but with an BT stack extracted from another PDA (don't remember wich one) it worked, it didn't worked very well, it dropped audio more or less each 30 seconds for 2 seconds, someone said at that time that was processor lack of power -I didn't agree with this-, but I did no further investigation.
As far as I've understood, the main bottleneck for stereo profiles (or any deamanding profile in BT) is the radio, of course, if We don't have access to the manufacturers good information, good tools, much time and even more will is very hard to find a solution to anything, most of us do not spend lots of time with this things -it's not easy for anyone with a "normal" life-, and I'm not complaining!
It's just fine for me, the whole thing it's quite enjoyable like this, some more time spent in this way and it would become a second work.
So, may us have fun and keep an excellent forum up.
haroldjclements said:
I have an O2 XDA Mini S and have just purchased a pair of Motorola HT820 Bluetooth headphones. I have paired the two; however, I only get the Hands Free service (which works) but NO Wireless Audio. I have not installed any other software / drives and I am using WMP 10 Mobile to play the music.
Any help with this problem would be very much appreciated.
Thanks, Harold Clements
Click to expand...
Click to collapse
on the front page not 2 rows (at the moment) below this thread in really big bold letters
MOTO HT820 SKIPPING SOLVED! NEW FIRMWARE INSIDE!
which covers the issues and varioius fixes (if any) for most phones.
To be truthful, I know very little about what I am trying to do. All I know is that I can’t get the music side of the Motorola headset working.
As I said in my previous post: I have an O2 XDA Mini S (Wizard) and have just purchased a pair of Motorola HT820 Bluetooth headphones. The two paired but I only get the Hands Free service but NO Wireless Audio. I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think It should also have ‘Set as Wireless Stereo’ but It don’t.
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am a) unsure if this is a solution to my problem, and b) what a hack is and why is it needed?
I just really want to know how to fix my problem.
Thanks for your help,
Harold Clements
a hack is getting a device which dont support a feature to do it anyway
if htc dident make your device to support a2dp == bluetooth stereo
you maybe be able to get it to do it anyway using a hack
if any hacks works for your device
as it differs
bluetooth support is never support for all profiles bluetooth have
plus there are bluetooth version 1 - 1.1 - 1.2 and 2.0
haroldjclements said:
To be truthful, I know very little about what I am trying to do. All I know is that I can’t get the music side of the Motorola headset working.
As I said in my previous post: I have an O2 XDA Mini S (Wizard) and have just purchased a pair of Motorola HT820 Bluetooth headphones. The two paired but I only get the Hands Free service but NO Wireless Audio. I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think It should also have ‘Set as Wireless Stereo’ but It don’t.
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am a) unsure if this is a solution to my problem, and b) what a hack is and why is it needed?
I just really want to know how to fix my problem.
Thanks for your help,
Harold Clements
Click to expand...
Click to collapse
The zoia a2dp hack (zoa2dp.cap) is what you need, it will give you "Set as wireless stereo" but be prepared for pretty bad skipping, that has not yet been solved for all of wizards.
Also if you flash to a custom rom (Like Molski's 2.26 it'll have the patch automatically.)

Bluetooth A2DP on my Tilt2: WORTHLESS AS $H!T

Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
e-thug said:
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
Click to expand...
Click to collapse
Hmmmm .... I don't believe you ever stated what type of headset you are trying to get working here? I find your problem to be very strange, even though WinMo does seem to be lacking in a lot of different areas, audio streaming via bluetooth stereo headset is definitely not a problem I have encountered. It even streams flawlessly through my 5.1 hooked to my pc via a crappy 8 buck bt dongle and still sounds excellent. Have you considered that the problem may lie with your bt headset itself?
Also, when you say that you installed latest "release" from AT&T (from a thread on this site), what exactly do you mean? I am running the "unofficial" leaked rom from AT&T on mine and I just paired my Motorola S9 stereo headset and it is playing great for me. You also may want to try using some different software, give S2P (Slide 2 Play) a try and see if you have different results. That's what I am using right now, but I have used TCPMP to play a few xVids through my headset and have had no problems.
The problem is not in the head unit. 25 other phones can't all be wrong. I have no problem using my bluetooth headset. That is probably why you don't see the problem. Anything more complex than a headset will not work with this release. The problem lies within the phone as soon as it displays a notification (which, of course I cannot disable) which reads, "The connected Bluetooth headset does not support volume adjustment from the device. Adjust volume on the headset itself."
That message is the kiss of death. So basically any Bluetooth head unit will not work with this phone? Sounds like shoddy programming to me. Yes, I am using the "leaked" release. I really don't think this release will ever see the light of day. Its horrible! You cannot disable notifications (I don't need to know when my text messages were sent successfully), and it looks like whenever I get a system notification, any program I am using crashes immediately. Like I said before, as soon as I get a notification, I lose the Bluetooth connection (which is like a split second before the notification comes up). I highly doubt this "leaked" copy will ever see the light of day, officially (unless AT&T and HTC do absolutely zero testing on it).
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
My Tilt 2 works absolutely fine with all my BT devices, including 2 Motorola headphone sets and my Sony Xplod head unit in my truck.
e-thug said:
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
Click to expand...
Click to collapse
I was mis-understanding you about the head unit, I did think you were talking about a headset. Sorry bout that, my Mustang doesn't have built-in BT so I have to use a Motorokr t505 for those chores. It works well but it does give me the same message that you are getting about "volume can't be cotrolled etc" but I can dismiss it and carry on without any problems.
but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
Click to expand...
Click to collapse
Since you don't need your phone for calls, just get Sirius or XM. Ya know, considering you only stream music through the phone..
Did you try the BT headset or head unit with the original stock ROM before you flashed the "leaked official" ROM?
Seems like you might have a couple random issues, with the BT issues and the system notifications crashing programs. I haven't flashed the leaked ROM, but I do know that many random issues with cooked ROMs can often be cleared up by running Task29, which completely wipes the phone memory before you flash a new ROM. I think you will need to HardSPL before you run Task29. Might be worth a try, sometimes fragments of the old ROM interfere with the new one, and cause some bugs.
Bluetooth protocols can be implemented differently by different manufacturers.
I know of many people including myself who have NO PROBLEM with the tilt 2 and different Bluetooth products INCLUDING car radios.
I am using the "new" AT&T ROM and have no difficulties.
Clearly your pissed but your subject is wrong. I would suggest changing to "Worthless as $HIT to ME"
I think my problem is that I am getting notifications which seem to be killing my connection. Is there a way to turn all notifications OFF? The only ones I care about are missed calls, incoming SMS and maybe a birthday. I would like to try to kill the notifications first because I think this may solve my problem
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/06/24/enable-or-disable-the-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/06/24/tweak-and-configure-how-notifications-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
redpoint73 said:
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/...he-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/...cations-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
Click to expand...
Click to collapse
Thanks I will try these out and report back
For the record my head unit is a JVC KD-BT11 and I have never had any kind of problem pairing any other phone
Somebody else just posted a very similar issue, and found the app hAndyUtils to be helpful:
http://forum.xda-developers.com/showthread.php?t=741311
I think hAndyUtils might just be a app-based way to make the reg edits I posted earlier. But give it a try.
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack. (Just as an aside, on all my past phones, there were people bemoaning the the fact that it had MS, and trying to replace it with the Widcomm, so I am getting a real chuckle out of folks complaining about the Widcomm and wishing for MS )
In any case, the utilities (Blue music toggle etc...) that used to work for me to toggle between streaming in stereo and plain phone qulity no longer work. However, all my stereo headsets (I own three different brands/pairs) all work perfectly with the Tilt 2. And stay connected and streaming all day.
By the way, coming on a forum that is full of people helping each other and using profanity, anger and threats, is not the most conducive way to get your questions answered. The odds are that the problem you are having is already solved somewhere among the 6+ million posts in this forum. I do not know where or I would post it for you, but it is probably out there. Good luck. And if you find it, please post the link to the answer back here so that other serchers will find it too.
maybe it can come from the phone itself
i had a rhodium for almost a year and never got my motorola headset ht820 to work well enough for me to use it... (more skips than music...cant move my head without a skip)
i flashed to a NRG rom before trying my headset...i tried eveything as far as ref setting, different radios...even flashed my ht820...
no improvement...
then my phone fell in water not so long ago...got another rhodium same model (european)...and it worked perfect out the box on stock rom i can go in a different room than my device and still hear music with no skips...and it still does with nrg rom and latest radio...
so my guess is maybe some actual devices have bad bluetooth hardware ???
I have the Motorola S9 and the HT820 and both work absolutely fine on my Tilt 2.
yatrg said:
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack.
Click to expand...
Click to collapse
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
e-thug said:
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
Click to expand...
Click to collapse
Did you ever try the solution in this thread? It fixed a lot of issues people were having with bluetooth car kits. Maybe it will work for you: http://forum.xda-developers.com/showthread.php?t=591322
The solution source is here: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html
And here is the solution. You need a registry editor to do this:
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change (or add if not there) DisableReopenAudio to 0 (default is 1)
3. Reboot device
You may also want to do the A2DP quality registry edit: Add a DWORD value of LineSpeed to HKLM\Software\WIDCOMM\Plugin\AV\ with a value of 320.
Give it a try, it may work for you.
I will give this a try and report back. Thank you very much for the response!
No luck. And my bdaddr keeps resetting to a binary value when I reset the phone

Bluetooth Connectivity With My Car

After searching this forum there is no thread on Bluetooth issues connectivity.
For a wile now i been searching the net and different sites for a fix between my phone and my car bluetooth. Before the epic i had a windows phone and the connectivity was fine including all the phonebook would load up and everything the system was build to do. With Android Epic i been having issues. Sometimes I cant connect to the car and other I am able to connect but phonebook wont load.
With all the Geniuses in the website i am sure someone can come up with a fix.
I figured i open this thread hoping we can find a final fix to retire this problem.
If it helps I am running the latest Viper Rom with Genocide kernel at 1.2ghz
However the rom did not change the statues of my issue.
Any help would be appreciated.
Thanks
I also have connectivity issues with bluetooth, in my case the car has A2DP allowing for music to be played over the car's stereo. It cuts out so much that it is completely useless for music. I mostly listen to podcasts but Pandora would be nice. However it cuts out so much that it isn't worth it. So if anyone does have a solution. To me though I've tried so many kernels, and roms to no avail that I'm pretty sure taht the software Samsung has shipped has faulty drivers. By the way it also seems that the cut outs occur when switching towers, however I could be wrong.
I use this in my car: http://us.kensington.com/html/14484.html
It may cut out every 45 seconds or so but it's the only thing I've used. Got it on sale for $20.
I've got a pair of a2dp bluetooth headphones that I use to listen to podcasts via my Epic. I've had zero problems with those (using DK28 atm, for the record). So I don't think there's a hardware problem with the Epic's bluetooth.
If we're going to get some troubleshooting done, we should get a bunch of details from everyone. Like exactly what bluetooth hardware they're using, and what roms they're running.
thezero4 said:
I also have connectivity issues with bluetooth, in my case the car has A2DP allowing for music to be played over the car's stereo. It cuts out so much that it is completely useless for music. I mostly listen to podcasts but Pandora would be nice. However it cuts out so much that it isn't worth it. So if anyone does have a solution. To me though I've tried so many kernels, and roms to no avail that I'm pretty sure taht the software Samsung has shipped has faulty drivers. By the way it also seems that the cut outs occur when switching towers, however I could be wrong.
Click to expand...
Click to collapse
Does everything cut out, or just Pandora? If it's just Pandora and other apps that need data connection, it might not be a bluetooth problem as much as a data connection problem.
I would suggest testing it by trying the car bluetooth with something that requires no data connection at all, like pre-downloaded podcasts.
I am talking about connectivity issues with in stock car bluetooths.
this problem is big many people been having this issue and there is a list of stock bluetooth cars that android wont pair with. I had the touch pro 2 for sprint with windows system and it worked fine in my car bought the epic and there we go. Now looks kind of bad that i would need to get an aftermarket piece to listen to bluetooth calls and load up the phonebook from android to my car.
Windows got it right even though i would never go back to a windows phone so i know there is something that android messed up here
Below i will put some links to show you how there is A LOT of people that been having this issue.
http://code.google.com/p/android/issues/detail?id=3960
http://www.google.com/#q=android+bl...start=0&sa=N&bav=on.1,or.&fp=3f40f95b1b9c7c0d
I have a 2006 Dodge Durango. It has Bluetooth. My old phone, a Samsung flip phone would connect without issue. My new phone, a Samsung Captivate, will connect most of the time, but often times, once it connects, it drops the call.
I understand this is an Epic thread, but I thought I would add my input as I am having similar problems (and this came up on my search).
If I understand you correctly, you connect some of the time and sometimes not.
Regardless, if your phone is rooted you might wanna try this.
I had a lot of issues with my bluetooth after upgrading to froyo and tried a lot of fixes including wipe3x and odin to stock....this is the one that worked for me.
http://forum.xda-developers.com/showpost.php?p=12120496&postcount=1392
Ensure that you first
- delete the car from your phone,
- delete the phone from your car,
- disable bluetooth,
- delete the file,
- CHANGE YOUR BLUETOOTH DEVICE name,
- restart,
- reenable bluetooth
- re-pair your phone with the car.

Bluetooth and Galaxy Nexus

Hi guys, question. My Nexus plays music through my aftermarket stereo fine through bluetooth but my annoyance is that the info doesn't show up. ie artist name, songs etc. While my ipod shows it all. I've read that it's just bluetooth firmware on the stereo/iphone/android but it's still such a pain in the a** that Iphone has the benefits while Android being better doesn't get as much. =( My question is do any bluetooth guru's out there know of a workaround or way to have info show up. My next step is trying different players etc.
The data needs to be sent by the application playing the music. I've found that Apollo will send this data to the screen on my 2012 Civic, the stock player does not.
I think certain ROMs have the latest bluetooth firmware. I think CM9 does? Not positive. I would also like to know if there was some way to update the firmware, on any ROM.
Cheesejam said:
I think certain ROMs have the latest bluetooth firmware. I think CM9 does? Not positive. I would also like to know if there was some way to update the firmware, on any ROM.
Click to expand...
Click to collapse
My GN wont connect for Bluetooth Audio (A2DP bluetooth receiver plugged into car ipod dock) - I have tried and tried, different roms, etc, no luck - my 3 year old Droid X works just fine, but my 8 month old Nexus wont connect - WTF. I enter password, get error that unable to pair.
My phone pairs to the car bluetooth phone no problem, but will not pair to audio.
Any suggestions???
Thanks!

help with bluetooth and car kit. please!!!

hey guys after all these years I'm finally back to Android.
I have the HTC One m8 with Verizon and so far I really like it. the only problem is I can't get the Bluetooth to work with my car. Its a 11 Mazda 3, what happens is when it ask for the password for the pairing I enter it (all zeros) after I push okay the car lose the connection and the phone says paired but my car dosent ask for a devise name. I hear there's a problem with this version of Android and Bluetooth into cars. is there like an app i can download or something I can do please someone help. I don't wanna go back to my iPhone
iNFiNiTY125 said:
hey guys after all these years I'm finally back to Android.
I have the HTC One m8 with Verizon and so far I really like it. the only problem is I can't get the Bluetooth to work with my car. Its a 11 Mazda 3, what happens is when it ask for the password for the pairing I enter it (all zeros) after I push okay the car lose the connection and the phone says paired but my car dosent ask for a devise name. I hear there's a problem with this version of Android and Bluetooth into cars. is there like an app i can download or something I can do please somt wanna go back to my iPhone
Click to expand...
Click to collapse
I don't have a Mazda, but have the Verizon M8 and have no issues pairing my phone for both calls and audio, regardless of whatever ROM I've tried. Your car is three years old, so I suspect the problem is there. I would take it into Mazda and see if there is a software update for their entertainment/bluetooth. Also, if you've paired up your phone to anything else previously (headphones, speaker, etc.) you might want to delete those pairings before trying to set it up again. If none of those things work, then you might be out of luck unless you want to upgrade your car stereo. There are many instances where certain devices/cars just don't work well together, but the M8 has the latest bluetooth release available. Good luck.
Thanks for the support and for helping find the Solution!
ebb said:
I don't have a Mazda, but have the Verizon M8 and have no issues pairing my phone for both calls and audio, regardless of whatever ROM I've tried. Your car is three years old, so I suspect the problem is there. I would take it into Mazda and see if there is a software update for their entertainment/bluetooth. Also, if you've paired up your phone to anything else previously (headphones, speaker, etc.) you might want to delete those pairings before trying to set it up again. If none of those things work, then you might be out of luck unless you want to upgrade your car stereo. There are many instances where certain devices/cars just don't work well together, but the M8 has the latest bluetooth release available. Good luck.
Click to expand...
Click to collapse
Think you for your fast response, so I called up my dealership and they said they don't have any updates for my stereo.
But I did find a solution YAY!
1. keep one of the failed pairs in your phone
2. download "Bluetooth Connect and Play"
3. Here are the settings you want:
Bluetooth Receiver is [ON]
when this bluetooth device connects...
[*] Mazda
4. Click the 3 dots in the corner and click "Tweaks"
5. Heres what you want:
When trigger player
(*) Start player on basic bluetooth connect only
Seconds to wait 0
everything else unchecked
6. Make sure all other connections are deleted from your car and then set the car to pair while the code 0000 is on the screen go to your bluetooth settings and delete "Mazda" then click "Mazda" when it comes up enter 0000 and then bluetooth connect and play will come up and music will start playing
7. music will stop and it will ask you to name the device.. cool
8. enjoy wireless music

Categories

Resources