[Video] How to perm root your g2 - G2 and Desire Z Q&A, Help & Troubleshooting

Thanx to blackprince310 that posted a tutorial video on youtube on how to perm root your g2..so now there's a video for all of us.. Subscribe to his youtube channel.......http://www.youtube.com/watch?v=tU9zn_BEth4
Sent from my T-Mobile G2 using XDA App

I spent a whole day learning ADB before I felt comfortable enough to go through and root my G2 lol. Wish I had seen this vid would have been a great help but I can send it to my friends who haven't taken the plunge yet.
Thanks for the heads up.

Xionas said:
I spent a whole day learning ADB before I felt comfortable enough to go through and root my G2 lol. Wish I had seen this vid would have been a great help but I can send it to my friends who haven't taken the plunge yet.
Thanks for the heads up.
Click to expand...
Click to collapse
Dude that was time well spent.
ADB is essential to android all together, there may be one click root options and other quick fix packages but if your seriouse with android you need to know ADB.

+1 for adb knowledge.
Sent from my HTC Vision using XDA App

Yeah adb is very usefull. Spending time to learn the commands will help you greatly in the future and also save you a lot of time.
[G2/HTC Vision]

aad4321 said:
Thank you for the video, i followed it what i thought was exactly. everything seemed to work fine, rebooted into recovery, it did say s-off but ever app i open says that the phones not rooted. any ideas?
Click to expand...
Click to collapse
aad4321 said:
aparently this is happening to several people. hope its an easy fix...
Click to expand...
Click to collapse
aad4321 said:
YAY I FIXED IT. THIS IS EXACTLY WHAT I DID.
1. reboot
2. Open and run visionary (with set system r/w after root) checked.
3. After root is complete, click root again (should say already rooted)
4. Open Terminal and sype "su" then enter
5. Type "sync" and wait about a min
6. POWER OFF THE PHONE the right way by holding down the power.
7. After reboot it should work! YAY!!
Click to expand...
Click to collapse
I fixed it as well but I did differently.. maybe it will help those still having trouble.. THIS IS EXACTLY WHAT I DID.
1) The first problem I had was I had Visionary 11 AND 12 (+plus) installed and both were set to root on boot. This was just a left over quirk from after doing the perm root since I just assumed it had to be set to root on boot, and after installing Vis12 I forgot to uninstall Vis11. Apparently Vis12 doesn't overwrite Vis11 so having both apps root on boot was a bad thing.
2) So I deleted both visionary apps (When they tried to root on boot I backed out of them and just uninstalled them)
3) Then I rebooted and was still not permrooted (although S was off)!
4) Sooo I reinstalled Visionary 12(+Plus)... and checked root on boot AND the r/w partition setting. Then rebooted..
5) With the lone visionary now installed and working solo it rebooted and ran on root and I was rooted..
So now i"m like, ok.. it rooted with visionary, but I don't want visionary in order to root...
6) So I uninstalled visionary 12 (for the second time) and rebooted and now the root stuck.
I think that visionary 12 needs to run after the first reboot with those two settings checked... run on boot and the partition setting. After that happens once I think it makes the root stick.. or at least it did for me.

I had same issue with S-off but no root. I did the manual method and got S-off but root never stuck. I tried the manual method again and again but when I rebooted the apps would say root access could not be gained. What ended up working was I went into Visionary 12 and pushed the temp root button. Once I had temp root I then pushed the perm root button. It did it's thing and rebooted. Once it rebooted I had root that stuck. Don't know if this will help anyone having this issue but it was the only thing that worked for me. As a side note, it was like seeing an old childhood friend when I flashed Cyanogens bacon bits.

How are you guys downloading visionary, now that its been pulled from the market?

CG05 said:
How are you guys downloading visionary, now that its been pulled from the market?
Click to expand...
Click to collapse
Download here.
visonary r13 is here. [post #133]

apollostees said:
Dude that was time well spent.
ADB is essential to android all together, there may be one click root options and other quick fix packages but if your seriouse with android you need to know ADB.
Click to expand...
Click to collapse
Yea gotta say I don't regret a single minute of searching reading and learning. I just wish I could have had the root and THEN learned how to use ADB simply because I'm an impatient chump at times. Learning how to use it seemed to open up my eyes to things though now I have a better grasp on everything I found confusing when I first came back to browsing the Android forums.

thanks this video was great worked perfect

shibby80 said:
thanks this video was great worked perfect
Click to expand...
Click to collapse
shibby, what version of visionary are you using? i cant download r11.

I downloaded r13..followed the video did exactly what he said..it did not work but I simply went back into visionary temp rooted my phone than I pressed perm root and it worked..r13 gives you diffr choices..it has a button for temp or perm rooting..now to download bacon bits and overclock
Sent from my T-Mobile G2 using XDA App

elbarto7 said:
shibby, what version of visionary are you using? i cant download r11.
Click to expand...
Click to collapse
i used r11 i believe you have to download on your pc then transfer to your phone it wouldn't work when i downloaded it with the phone

Thanks.
Sent from my T-Mobile G2 using XDA App

elbarto7 said:
Thanks.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
i sent you a pm

I am just curious: if I do this perm root with S-OFF, but keep the stock ROM for the time being, will that prevent potential future OTA's from T-Mobile, potential upgrades to next versions of Android?
Now, I understand that all those "updates" will also be available via these forums but I'm just a tad concerned that all the custom ROM's might have bugs that would prevent everyday features...
I appreciate stuff like overclocking and tethering/hotspot hacks, but I'm more of a "set it and forget it" kinda guy - most likely I won't have time to constantly test new ROM's and report bugs, wait for fixes, etc.
Just wondering if you have any suggestions?
P.S. Although I am not VERY technical with Android I was able to follow instructions around here to reflash stock ROM, but I was in the "emergency" mode - it was "do it or die" situation made me pretty nervous and I hope not to have to do that constantly

I did everything in the video...and I have s-off and the superuser app every reboot...but root won't stick....and yeah..I've tried temp and perm root with visionary r12 and 13....should I start all over again?

Get r13...it gives you an option to temp root or perm root..click on temp root first than click on perm root..let see if that works
Sent from my T-Mobile G2 using XDA App

android602 said:
Get r13...it gives you an option to temp root or perm root..click on temp root first than click on perm root..let see if that works
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
i've tried that with all versions ..even with r14 which was just released...i dont wanna flash clockworld recovery because thats making some phones stuck at the htc screen

Related

Just got a new EVO, how do I root?

Yea Yea, I know the most common question, yet I don't see anything for the newest version (3.26.651.6)
I am not looking for any special Rom, just a standard Root.. A one click would be great, but whatever you guys recommend would be awesome!
THANKS!!
fastfed said:
Yea Yea, I know the most common question, yet I don't see anything for the newest version (3.26.651.6)
I am not looking for any special Rom, just a standard Root.. A one click would be great, but whatever you guys recommend would be awesome!
THANKS!!
Click to expand...
Click to collapse
First, 3.26 is not the newest version. The current OTA is 3.29.
Second, Look at unrEVOked to root both 3.26 and 3.29.
Edit: I just searched. http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=787304
Just followed all that exactly, I have NO idea if it worked or not.. It went to the boot screen twice on mine and only once on the video and the video also showed it going into a dos type of screen "loading" things (on the phone)
MINE DIDNT DO ANY OF THAT..
This is nuts! How am I to tell if it is installed or not? The instructions dont tell you at all how to check!!
fastfed said:
Just followed all that exactly, I have NO idea if it worked or not.. It went to the boot screen twice on mine and only once on the video and the video also showed it going into a dos type of screen "loading" things (on the phone)
MINE DIDNT DO ANY OF THAT..
This is nuts! How am I to tell if it is installed or not? The instructions dont tell you at all how to check!!
Click to expand...
Click to collapse
Restart the phone into boot loader. (Volume down + power.)
Does it say S-Off in the first line?
Yes? Then you should load into Clockwork by selecting recovery.
Also is super user app installed?
If yes to both, you should be rooted.
The dos screen was probably adb, just to show it was rooted.
If you open the tools folder with adb in it and type "adb shell" it should show a $ if its rooted and a # if it is not.
If you type "su" your phone should then show a superuser request, which also means you're rooted with super user access.
(I clicked though the videos but didn't see any dos screens. :-/)
Sent from my Evo using XDA App.
learn how to use the search feature on this site, and read the instructions 3times before trying to do something you are not familiar with on your new phone. Rushing into things will only cause you problems...
if you show S-off in the bootloader menu then you have done the root correctly.
Goodluck.
do a search for "One Click How to Root the EVO with Unrevoked 3.21" by djR3Z
i just rooted my evo yesterday using the instructions in his post. it's the easiest and quickest method i've found. hope this helps.
Yea I rushed a little for sure..
But Im coming from a CE phone and very familiar with it..
Here is the problem... and I notice with many many other people to.
I wound up doing the 1 click rooting, but it took some digging and searching to figure out I needed an additional program, (SU)
It doesn't mention on almost every tutorial that you need to get a file managing program and the SU program.
Sure it teaches you how to root properly, but to actually benefit from the root you need the other files.
Well, in anycase, Im happy got what I wanted and what I wanted to work, works flawlessly
Thanks guys!
Unrevoked installed SU for me.
You can also get a flashable zip from the forums here.
And super user is also on the market.
Oh, btw...
Congrats!
Sent from my Evo using XDA App.

Root help please

So I finally got my G2/Vision, I want to perm-root my G2. But I fail so much, I can't even put Visionary into my G2.... I downloaded Astro, but I need to place Visionary r14 in my SD, but I can't find a place to put it.
When I look in my SD through windows, it shows me a LOST.DIR, .Trashes, .Spotlight-V100, .fseventsd, .android_secure, Android, etc. etc. But I still can't find the spot to place Visionary, Help?
place it in that folder
ilikepu said:
place it in that folder
Click to expand...
Click to collapse
Haha, I figured I'd just dl it off the internet through my G2. It worked. Configured it.
Word to the wise, stay away from visionary. Use rage.
ddgarcia05 said:
Word to the wise, stay away from visionary. Use rage.
Click to expand...
Click to collapse
Whats the difference? And... What happens if I already used Visionary?
If you used Visionary and it worked for you, then that's great.
I also try and steer folks away from Visionary myself. Quite a few seem to end up with a lot of problems after using Visionary. The "rage" method of rooting is a lot more reliable, it's just that it looks a lot more "scary" to newcomers because there are commands you have to type in and run on your PC and phone. But if you read up on it, and ask questions if you don't understand, then follow the instructions carefully, you'll be fine - and even if rage goes wrong then you won't end up with a semi-brick, you just won't get root (until you fix the problem).
Ohhhh, Ok. Yeah I couldn't get Visionary to work until several tries. Took me a while. I was supprised I hadn't bricked my phone already. But now I'm pretty satisfied with CM 6.1 w/ MattedBlues theme. Sucks though I couldn't get it to work with Virtuous. I really like Sense alot more than the stock Rom (I consider CM 6 to be pretty stock)
Hope this helps!!!
steviewevie said:
If you used Visionary and it worked for you, then that's great.
I also try and steer folks away from Visionary myself. Quite a few seem to end up with a lot of problems after using Visionary. The "rage" method of rooting is a lot more reliable, it's just that it looks a lot more "scary" to newcomers because there are commands you have to type in and run on your PC and phone. But if you read up on it, and ask questions if you don't understand, then follow the instructions carefully, you'll be fine - and even if rage goes wrong then you won't end up with a semi-brick, you just won't get root (until you fix the problem).
Click to expand...
Click to collapse
+1 on the reliable and +1 on the scary!!!!
I am very new to Android,...I've only had my G2 for about 2 months...I ran Visionary temp root without issues (r10). When I tried to install in r14 to perm root, I encountered a myriad of errors, and decided not to root.
But I just couldn't give up on it....two weeks ago I got food poisoning, which rendered me useless and home bound, I decided to attempt it. I decided to use the rage method, but found that the instructions assumes that you know something about rooting. There are alot of people on this forum that are willing to help (steviewevie was one of them) to get you your through what ever hurdle you encounter.
Personally I found the rooting process very rewarding as I now have less of a vague idea of what is happening in my phone (ie not as lost as before).
Some of the basics:
- Install adb on your pc (not that scary), and read a bot on it...understand what some of the basic commands are trying to do. (see the rooting guide for those commands)
- set your path on your PC to point to the correct directory from where you are pushing (There are a few forums here that will guide you setup by step on how to do this)
-Follow the instructions to the T, and you should be ok.
Click here to go to the thread that these guys helped me while I going through the process. Post #4 makes reference to the path on your pc.
NOTE:This Path should point to the location where you have your adb tools and location of the files you are trying to push to your phone.
Post #17 goes step by step on what you need to do, and how the lines on the terminal should look like.
This is really not that difficult once you get your bearings, and for me it was a lot of fun...actually a little bored with the phone after having done this.
Put (SOLVED) in your thread title please.
Sent from my HTC Vision using XDA App
You all seem to suggest to not use visionary but use rage but from what I saw yesterday we had 2 "bricks" from people rooting with rage, compared to none from visionary
Lennyuk said:
You all seem to suggest to not use visionary but use rage but from what I saw yesterday we had 2 "bricks" from people rooting with rage, compared to none from visionary
Click to expand...
Click to collapse
Ouch! Really? So no method is any "safer" yet then? Was planning on return to stock then Rage today. I take it I can't update my radio without full radio s-off? Or can i"?
Sent from my HTC Vision using XDA App
ddotpatel said:
Ouch! Really? So no method is any "safer" yet then? Was planning on return to stock then Rage today. I take it I can't update my radio without full radio s-off? Or can i"?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
If you know how to read, you can safely root using rage. Just read over the instructions a couple times first.
If you know what your doing both methods are as safe as each other. From what I can see there is a larger margin of error using Rage, however its entirely in your own hands, so as long as you make sure you input it all correctly it should be fine.
Both "bricks" yesterday were recoverable, and both times the user was sure they followed it all correctly, it just seems that their rom corrupted during the process so ended up stuck on a bootloop.
blackknightavalon said:
If you know how to read, you can safely root using rage. Just read over the instructions a couple times first.
Click to expand...
Click to collapse
Lennyuk said:
If you know what your doing both methods are as safe as each other. ...
Click to expand...
Click to collapse
So we not talking about the random occurance of file corruption then?
Thank you both (i'll add the to your thanks meters when I have some available). Just need to find how to fully reverse the rage method if needed.
Lennyuk said:
If you know what your doing both methods are as safe as each other. From what I can see there is a larger margin of error using Rage, however its entirely in your own hands, so as long as you make sure you input it all correctly it should be fine.
Both "bricks" yesterday were recoverable, and both times the user was sure they followed it all correctly, it just seems that their rom corrupted during the process so ended up stuck on a bootloop.
Click to expand...
Click to collapse
Are you sure the corruption didn't stem from an earlier unsuccessful attempt to root with Visionary ?
I've yet to see a thread where someone has done something bad to their phone via rage, all it does is fire up a ton of process to use an exploit which gets you root. That can't corrupt your phone on its own.
Do you have some links ?
ddotpatel said:
So we not talking about the random occurance of file corruption then?
Thank you both (i'll add the to your thanks meters when I have some available). Just need to find how to fully reverse the rage method if needed.
Click to expand...
Click to collapse
Here you go.

How to put cyanogen with visionary?

Hi, I'm sorta a noob with rooting so bare with me. First, what version of visionary should I use to root my device? Will it work after the ota update? What are the chances of visionary bricking my phone or doing anything that would make my phone unusable? Will it put SU on my phone? And now for the main question, how will I get cyanogen on my g2? Thanks for any help!
Sent from my T-Mobile G2 using XDA App
As far as i know visionary is not gonna brick your phone ,in regard to changing your rom you also need to s/off your phone, and to do that you need to setup ADB on your computer i suggest you read this posts first ,you will find all the answers you are after
http://forum.xda-developers.com/showthread.php?t=857390
http://forum.xda-developers.com/showthread.php?t=855764
http://forum.xda-developers.com/showthread.php?t=835777
http://forum.xda-developers.com/showthread.php?t=532719
After you root and s-off your phone you need to setup rom manager so you will get clockworkmod recovery and you can boot in to that and flash a new rom or kernel through there.
and i am not sure about the question you had about the update.
yes you will get su after rooting.
Hwoarang747 said:
Hi, I'm sorta a noob with rooting so bare with me. First, what version of visionary should I use to root my device? Will it work after the ota update? What are the chances of visionary bricking my phone or doing anything that would make my phone unusable? Will it put SU on my phone? And now for the main question, how will I get cyanogen on my g2? Thanks for any help!
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Ok, first there are already many threads on this subject, so next time you should try a search first,
for example: http://forum.xda-developers.com/showthread.php?t=850141
http://forum.xda-developers.com/showthread.php?t=882546
Next the following links will help walk you thru rooting your phone using visionary r14. I have not had any problems with it, many people have rooted this way. If something goes wrong it is usually operator error. This method is for after the OTA. All needed files and links are in the video instructions.
Visionary has bricked phones before when not properly used, the videos show how to use it properly, use all the same settings in the videos.
This is the visionary method, but works perfectly when done correctly..
No adb needed.
Follow the videos to a "T", remove visionary and superusers from you phone if you already have them installed from a previous temp root before following the videos, start fresh, follow the videos starting with temp root then onto perm root then onto flashing a rom. Do everything just like the videos start to finish and you should have no problems.
Temp root first:
http://theunlockr.com/2010/10/20/how-to-root-the-t-mobile-g2-htc-vision-visionary-method/
Then perm root
http://theunlockr.com/2010/11/30/how-to-gain-permanent-root-and-s-off-on-the-t-mobile-g2-htc-vision/
Then flash a rom
http://theunlockr.com/2010/11/30/how-to-load-a-custom-rom-on-the-t-mobile-g2-htc-vision/
Remember don't assume you know how to temp root properly, follow all three videos start to finish and you should have no problems
Also the video "Load a custom rom" will give you a link to flash your first rom. There are a couple of choices to choose from.
Good Luck.
Editlease see post #32 in this thread for a testimony from someone who just followed the videos and rooted his phone.
Thanks soooo much!!! I have another question, how will I be able to get gingerbread after rooting? Or should I wait? Do I need to wipe my phhone? And what if I just want vanilla android with su and cyanogen?
Sent from my T-Mobile G2 using XDA App
Hwoarang747 said:
Thanks soooo much!!! I have another question, how will I be able to get gingerbread after rooting? Or should I wait? Do I need to wipe my phhone? And what if I just want vanilla android with su and cyanogen?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Everyones still waiting on gingerbread, but it looks like Cyanogen is in the lead for releasing it.
Any time you flash a new rom you need to wipe data/cache in recovery. Updates to the same rom a wipe is not needed.
As far as what you want in a rom, my suggestion is to start flashing diffrent roms and give them a try. I thought I didnt like sense but I am currently running a sense rom (Virtuous). So you dont know till you try.
1) Don't use Visionary. People have had brick after brick when using it. Use the rage method.
2) There's a beta version of CM7.0.0 out. The devs are still working out the bugs in it.
Sent from a Western Union telegram.
blackknightavalon said:
1) Don't use Visionary. People have had brick after brick when using it. Use the rage method.
2) There's a beta version of CM7.0.0 out. The devs are still working out the bugs in it.
Sent from a Western Union telegram.
Click to expand...
Click to collapse
1)Show me one brick from someone following the videos I posted and Ill take the links down. Yes a lot of people have bricked using visionary, but thats because they assumed they knew what they were doing when in fact they did not. Visionary causes bricks when not properly used, the videos shows how to use it properly. You must follow all the steps from start to finish including the temp root settings they use in the videos.
2)and yes there is a beta version of gingerbread out CM7 but Cyanogen did not officially release this version, and there are so many bugs in it I hardly think a noob needs to flash CM 7.0.0.
What exactly its the range method?
Sent from my T-Mobile G2 using XDA App
Hwoarang747 said:
What exactly its the range method?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Its Rage method and heres a link to the thread:
http://forum.xda-developers.com/showthread.php?t=834228&highlight=rage
I recommend you read this thread and make informed desicions, if you know how to use ADB, then this is another method. But if you dont the method I posted above is your other option, it doesn't require the use of ADB.
As far as ADB goes this is something I highly recommend learning, but we all know some people just dont get it. It took me a lot of reading and watching videos to understand ADB. Now that I know how to use ADB its pretty simple, but I remember when I first started with rooting ADB was like reading greek. But I really cant stress enough the importance of learning ADB.
Hahah sorry, i was using swype. And yeah, so what do you recomend, cause i really dont wanna brick my phone for its fairly new.
Oh, and another thing, if i root with visionary or rage, that only gives me root access. But if i flash a rom then i will also have cyanogen? And i was reading, since i wanna oc, whats this kernel stuff? Please forgive my noobish ways
Hwoarang747 said:
Hahah sorry, i was using swype. And yeah, so what do you recomend, cause i really dont wanna brick my phone for its fairly new.
Click to expand...
Click to collapse
I used the videos to root my G2, there have been a lot of bricks using Visionary but I have yet to see anyone say they followed the videos to the "T" and it bricked there phone. As for the Rage method, there have been almost no reports of bricks from this method, but I have seen a few bootloops (stuck on the HTC screen). It requires using ADB, so if your ok with ADB use the Rage method, if not, you'll have to weigh the risks based on your own ability. My suggestion, watch the videos, all of them and if its something within your skill range go for it.
Hwoarang747 said:
Oh, and another thing, if i root with visionary or rage, that only gives me root access. But if i flash a rom then i will also have cyanogen? And i was reading, since i wanna oc, whats this kernel stuff? Please forgive my noobish ways
Click to expand...
Click to collapse
Ok, get rooted first then you can worry about kernels, I believe Cyanogen 6.1.1 already comes with an overclocked kernel up to 1.42GHz. So all you have to do is flash CM 6.1.1 his latest release, then down load a cpu controlling app from the market like setcpu(which I use) or cputuner(free) and set the parameters you want your cpu to run at.
Thanks, but a boot loop is fixable right?
Sent from my T-Mobile G2 using XDA App
It usualy is you can boot in to recovery and wipe and flash another kernal or rom. Just have a look at the links that I posted ,you will get all the answers.
Sent from my HTC Vision using XDA App
Hwoarang747 said:
Thanks, but a boot loop is fixable right?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Not always hopefully if this happens you have gotten far enough along to put a recovery on your phone, or sometime you can stock recovery factory reset but if those options arn't there guess what you would have to have AndriodSDk installed on your computer with ADB, but you would have to do everything in fastboot mode which is giving commands from your computer to you phone. So it wouldn't be adb because you have to be booted into Andriod to use it, it would be fastboot and run commands similar to ADB, so for this purpose you would have to know how to use ADB. And even then no guarantees. So if you are looking for a guarantee you wont brick your phone there are none, and I wont give you one, these methods have been proven to work if you follow them exactly, mess up and you have a brick.
I know most people dont have $500+ laying around and I know I dont but for me the rewards far outweighed the risk. I just got a pm from another member that followed the videos and guess what he is rooted, he did it today. I asked him to post in this thread with his success story, so hopefully he will.
Here is a quote from him from my PM "it worked! i got so frustrated with adb, i gave it a shot and success!"
Edit: He just posted success his user name is robot_agenda and his post is #32 in this thread.
wait so what did he give a shot? the gfree method?
Hwoarang747 said:
wait so what did he give a shot? the gfree method?
Click to expand...
Click to collapse
He rooted his phone with visionary following the videos I posted.
and also, have you heard of the issue with visionary where the phone boots into recovery when being charged?
Hwoarang747 said:
and also, have you heard of the issue with visionary where the phone boots into recovery when being charged?
Click to expand...
Click to collapse
That has nothing to do with visionary, thats has to do with ClockworkMod recovery, if your phone is powered off and you plug it in to charge it boots into recovery, if you want root you have to deal with this issue untill they fix the bug in clockworkmod recovery. Also the phone shuts off fine unless its pluged in. Everyone with a htc vision phone who is rooted has this issue. as for me I charge my phone while it on so it doesn't bother me.
heres a link to the problem:
http://forum.xda-developers.com/showthread.php?t=884516

[Q] Rooting my phone....

I just got my G2 phone not too long ago and I want to start doing this modding stuff. (I've never had a smart phone before, this is the first). And I'm not sure where to start... Can someone direct me into the right direction?
I used blackprince310's video to help me root my phone.
http://m.youtube.com/index?desktop_uri=/&gl=US#/watch?xl=xl_blazer&v=tU9zn_BEth4
Once rooting you can download other ROMS. Which are like differnt OS. Like g2 runs stock froyo let's call that windows xp. When you root it u have the capabilities to modifiy without problem. Now u can put like sense on your phone that's like windows 7 persay.
Three main apps u need from app store are ROM Manager, Titanium Backup, & Superuser. Other ones could be gscript, terminal. & in video u need Visonary.
Sent from my HTC Vision using XDA Premium App
Is there an alternate way? Because I had been doing some reading on ppls feedback on diff threads n the visionary way seems to be a way to brick your phone or an unsafe way to go.
can anyone please help?
Goto development and find the stickies on rooting without visionary, I did it that way. Simple and haggle free and nothing to worry about, first time g2 user
Sinistah_ said:
Is there an alternate way? Because I had been doing some reading on ppls feedback on diff threads n the visionary way seems to be a way to brick your phone or an unsafe way to go.
Click to expand...
Click to collapse
Just follow the simple wiki guides. Don't use Visionary to perm root.
Youtube the unlockr for htc vision. You use the VISIONary app to temproot, then you can gain permroot after finishing both tutorials. They're very clear and concise tutorials, I actually followed it a few months ago knowing absolutely nothing about root or adb.
Sent from my Liquid Metal using XDA Premium App
Use rage.
Visionary used to be a one click root app. However, it caused problems for some users. The unlockr corrected the issue in the tutorial. You will first gain temproot through visionary, copy files and run some adb commands via desktop, then gain permroot and s-off again through visionary. Its really easy, all you have to do is copy him. I did it myself in november and my phone still runs flawlessly.
Sent from my Liquid Metal using XDA Premium App
I don't see anything on Youtube bout "unlockr"
Sinistah_ said:
I don't see anything on Youtube bout "unlockr"
Click to expand...
Click to collapse
Type in "htc vision visionary". Its the first video I believe.
Sent from my Liquid Metal using XDA Premium App
do i have to downgrade for the method u mentioned? cause I'm thinkin bout doin this since ADB is kicking my butt, I can't figure it out.
Sinistah_ said:
do i have to downgrade for the method u mentioned? cause I'm thinkin bout doin this since ADB is kicking my butt, I can't figure it out.
Click to expand...
Click to collapse
If you use Rage (the method I linked to earlier), you won't need to downgrade. Just type in the commands using ADB and Terminal Emulator and flash ClockworkMod Recovery through ROM Manager and you're good to go.
See I want to do it thatf way but I can't figure out ADB I'm stuck at one part at on that noob guide. :/ I can't figure out how to use the cd command to go to the file wwith adb on it which is on my desktop ....(using the fast method for windows xp). Then I tried the other way and I could never get the path part right.
Sent from my T-Mobile G2 using XDA App
Sinistah_ said:
do i have to downgrade for the method u mentioned? cause I'm thinkin bout doin this since ADB is kicking my butt, I can't figure it out.
Click to expand...
Click to collapse
If you haven't already figured out the adb problem, no, you don't have to downgrade to use the other method. But then, I don't know what would happen if you switch from one rooting method to another. Especially when you're right in the middle of it xP
Sent from my HTC Vision using XDA Premium App

Issues Rooting with Superoneclick

Hi, I have tried rooting about 20 times (not even kidding), and almost every time it gets stuck on step #7. I have installed drivers from LG and have phone in debugging mode. (I tried doomlord, but it won't recognize my Nitro) Does anyone have any advice to help me root my Nitro?
*Mods, feel free to move this to the rooting section, it just wouldn't let me post in there*
Try rooting it the way they root the optimus. That's what I did and it worked fine.
Sent from my LG-P930 using XDA
Did you use the latest SuperOneClick 2.3.3 for rooting your device? I can confirm it works with LG LU6200...
http://www.box.com/s/245a1043a874497c26e7
If this isn't working for you, this should:
http://www.box.com/s/9b369b91e370b60a1544
(its working in ADB mode, make sure your device is in USB debugging mode and connected to your PC)
Good luck!
Use doomlords root
Sent from my LG-P930 using xda premium
Use SuperOneClick v.2.3.2 and not 2.3.3. The latest version don't want to root our Nitro. I can't understand why, but 2.3.2 version root very well.
Sent from my LG-P930 using xda premium
mgoblueno1 said:
Hi, I have tried rooting about 20 times (not even kidding), and almost every time it gets stuck on step #7. I have installed drivers from LG and have phone in debugging mode. (I tried doomlord, but it won't recognize my Nitro) Does anyone have any advice to help me root my Nitro?
*Mods, feel free to move this to the rooting section, it just wouldn't let me post in there*
Click to expand...
Click to collapse
Remove the SD card( or unmount it), i got the same problem here and it thats what worked
What worked for me was installing the Android SDK package.
I was hanging at step #7 as well and after installing the package it went through.
Machzelet said:
Use SuperOneClick v.2.3.2 and not 2.3.3. The latest version don't want to root our Nitro. I can't understand why, but 2.3.2 version root very well.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Im having trouble finding 2.3.2, is there a thread with download links?
Machzelet said:
Use SuperOneClick v.2.3.2 and not 2.3.3. The latest version don't want to root our Nitro. I can't understand why, but 2.3.2 version root very well.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Found one on a random website, and it worked on the 3rd try...thanks!!!
mgoblueno1 said:
Im having trouble finding 2.3.2, is there a thread with download links?
Click to expand...
Click to collapse
Click on a link in my signature and download from my guide. I have an issue to upload the file right here.
problems rooting too!
So this being my first post and all please dont freak. I searched as best I could to find the proper thread to ask this and this seemed like the best option. So here it goes.
I myself tried rooting my phone with Superoneclick and after numerous attempts I failed miserably. So I tried Doomlord's rooting method. I thought I had figured it out because at the end it said "OK!" and it even rebooted my phone but when I tried to DL Titanium backup and busybox it said it could not gain root access. My question is, first would it be safe to attempt the root process again, or if not any ideas on what I might have done wrong and maybe a solution to fix it?
Thanks again
P.S dear Mod if this was the inappropriate place to post this I apologize in advance.
i would download the superuser app and see if tibu finds root
also, there should be no prob running the rooting app again if you choose to, if you are rooted already it should return a *already rooted* message.
So I tried dl superuser and that did nothing. I even did a master reset maybe thinking that I might of changed a setting I want suppose to, and even that didn't work. Like I said I can't get SOC past step 7 and I've tried all the tips I read on here to get past that problem but nothing. Doomlords looks like it worked and it reboots my phone but still nothing. I would really truly appreciate any help!
thanks again
Sent from my LG-P930 using XDA
I tried super one click and dark warlords roto rooter and nothing. I can't root and I want to. Like Herman Munster said...darn darn darn .
I took a photo of my errors so maybe some one could help?
Gino
Sent from my LG-P930 using XDA
I can't get my photo to upload
I cant get my screen shot to upload. I've tried everything. Anyhow, I still can't get my phone rooted. When I rooted my Aria, I used a program on my MAC that rooted it in about 20 seconds. Whatever happened to that?
Gino
thedicarlos said:
I cant get my screen shot to upload. I've tried everything. Anyhow, I still can't get my phone rooted. When I rooted my Aria, I used a program on my MAC that rooted it in about 20 seconds. Whatever happened to that?
Gino
Click to expand...
Click to collapse
Apples and oranges. The two programs used to install custom recovery on the Aria utilize exploits in the HBOOT, which is something only HTC devices have.
What software version do you have on your device? (Look in Settings > About Phone > Software version)
I'm having the same situation. Everything I've read says that if you did the security update without root already then you can't root now. I would love for some one to prove me wrong and show me a way. IM running 2.3.5 v10j with kernel 2.6.35.11.
Thanks
Sent from my LG-P930 using XDA
What I'm running
Hi Drumist! I'm running 2.3.5 v10j with kernel 2.6.35.11.
Gino
thedicarlos said:
Hi Drumist! I'm running 2.3.5 v10j with kernel 2.6.35.11.
Gino
Click to expand...
Click to collapse
You have the recent update installed which makes it impossible to root the device. There are still methods to get the device rooted but it is not simple and basically involves this process: http://forum.xda-developers.com/showthread.php?t=1597488
I would urge you to make sure you know what you're doing before attempting this though.
I had the above problem with not being able to root my phone due to the software version i had. I had to use the "unbricking guide" and after some challenges i was able to restore the phone to stock with root. It is risky, but at this moment im not sure theres any other way to do it, unless someone with programming skills can find an alternate method to go back to a previous version of the software without resetting or unbricking the entire phone.

Categories

Resources