Develop Bugs

Surface II or active

This is my final question about a case for my Evo, Im down to the Seidio Innocase II Surface and the Active which case will be the better choice? I red a couple reviews about the active not fitting correctly and i heard horror stories about the surface scratching the edges

I love my blue Seidio Innocase II Surface Case (looks purple on amazon)... Fits tight, no play. I have to go slow when I put it on so that I don't lift up the edge of my invisashield.

I think my case is the active and I hate it. The back has started to peel and a corner broke like it came unglued. I'm going to get an otterbox instead I think.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nefariouss said:
I think my case is the active and I hate it. The back has started to peel and a corner broke like it came unglued. I'm going to get an otterbox instead I think.
Click to expand...
Click to collapse
Looks like you have the innocase active limited edition, available only through amazon. I have the same and the plastic skeleton doesn't fit 100% perfectly, but it's not bad. I too had some clips (top and bottom right) break off, but mine gets banged up a lot while i'm at work so I wasn't too surprised.
The regular innocase active looks like the skeleton has been enlarged to prevent the clips from breaking.
I just ordered an otterbox commuter case and a seidio innocase rugged combo.
Personally, I like having the combo of a hard shell with the soft cushion of the silicone.
-SLS-

Nefariouss said:
I think my case is the active and I hate it. The back has started to peel and a corner broke like it came unglued. I'm going to get an otterbox instead I think.
Click to expand...
Click to collapse
I had the exact same thing happen, but sedio did honor the warranty. Just a thought.

I bought the PT brand from Best Buy today and I believe it is the same as the surface. It is made by Seidio but labeled differently.
I love it. Doesn't add much bulk and feels good in the hand.

Well maybe I'll give them a call about the warranty. I like the overall case design just disappointed in the flaws I've had with it so far. Thanks for the heads up.

Nefariouss said:
Well maybe I'll give them a call about the warranty. I like the overall case design just disappointed in the flaws I've had with it so far. Thanks for the heads up.
Click to expand...
Click to collapse
I'm in the same boat, my rugged has had the corners break off both on my case and my wife's.
I don't think I want to pay for the shipping to replace it through warranty though...I think I may just wait for TridentCase to make a Kraken case for the Evo.

Well, just got the seidio rugged case today and i'm really not impressed. Basically a larger version of the active limited edition. The plastic skeleton seems better quality though. Cheap port covers. My suggestions to seidio: take the rugged and shrink it to fit without the surface. Then make the belt clip so the phone can be inserted face in AND face out and reconfigure the top latch to be smaller/smoother.
Long story short, I switched back to my active limited while I wait for the trident cyclops and the otterbox commuter cases that I ordered to arrive.
Ps: I noticed that the exoskelleton from the rugged fits PERFECTLY over the one from the active limited.
-SLS-

Nothing beats OtterBox cases NOTHING!!
Sent from my PC36100 using XDA App

JArcher84 said:
Nothing beats OtterBox cases NOTHING!!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Except apparently themselves. Late to the market, they've lost a ton of sales.

SouL Shadow said:
My suggestions to seidio: take the rugged and shrink it to fit without the surface.
Click to expand...
Click to collapse
I don't think I understand. It seems like you are telling them to make the Active, they already do that.

SouL Shadow said:
Looks like you have the innocase active limited edition, available only through amazon. I have the same and the plastic skeleton doesn't fit 100% perfectly, but it's not bad. I too had some clips (top and bottom right) break off, but mine gets banged up a lot while i'm at work so I wasn't too surprised.
The regular innocase active looks like the skeleton has been enlarged to prevent the clips from breaking.
I just ordered an otterbox commuter case and a seidio innocase rugged combo.
Personally, I like having the combo of a hard shell with the soft cushion of the silicone.
-SLS-
Click to expand...
Click to collapse
No problems with my innocase active I got from eBay, I've seen a lot of people complaining about the limited edition one Amazon sells, very happy with mine though, and ebay had it cheaper than seidio's website. The otterbox isn't bad but only comes in one color I think.
Sent from my PC36100 using Tapatalk

bharris25 said:
No problems with my innocase active I got from eBay, I've seen a lot of people complaining about the limited edition one Amazon sells, very happy with mine though, and ebay had it cheaper than seidio's website. The otterbox isn't bad but only comes in one color I think.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Hate to be a bother, but anyway you or anyone can post pictures of their Active case? I'm on the fence about buying one, and if I do it'll be the Active case with holster combo.
Seidio says the camera does not touch any flat surface with the case, and it actually looks as if it doesn't add TOO much bulk to the phone like some others, and a couple of the Otterbox's I was looking at fall into that category.

aronslusa said:
Hate to be a bother, but anyway you or anyone can post pictures of their Active case? I'm on the fence about buying one, and if I do it'll be the Active case with holster combo.
Seidio says the camera does not touch any flat surface with the case, and it actually looks as if it doesn't add TOO much bulk to the phone like some others, and a couple of the Otterbox's I was looking at fall into that category.
Click to expand...
Click to collapse
The camera does not touch on a flat surface.
The case adds very little bulk, but it will sure seem like it does when you hold the evo naked after using it a while. Same for any case of this type.
I have the regular active (not the LE with smaller outer shell) and the rubbery outer coating has worn off in the corners like in the pics of the LE that were posted. I'm sure this is due to my using it in a snug leather case, and is confined to the corners. No big deal to me. You can only tell if you look closely.
As far as fit goes, it is snug and well designed. Button use is as good as naked. Only complaint is dust builds up slowly on the left side where the outer shell fits into the soft inner layer. I take it apart and rinse the soft layer off every couple weeks.
My phone has taken several 3ft drops (off desk, out of shirt pocket while tying shoe lace) and is completely unharmed.
Is it the best case in the world? Maybe not, but it is comfortable to hold and protects the phone very well.
If this one were to break, I may try the otterbox but I'm not parting with it any time soon.
The pictures on Seidio's web site are better than what I could send you.
JAson

JArcher84 said:
Nothing beats OtterBox cases NOTHING!!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
fanboy much?

I have the New Blue/Black Active Case and i LOVE it it fits perfectly its easy to take off if you need to swap batteries or put it in a dock, the new STyle Active is very durable doesn't crack easily.
Ive had mine for months now and the only visable issue with the back is where the Seidio name is its rubbing off from being set down and rubbed against other than that it's great it fits perfectly doesn't shift no gaps nothing.
the pictures they posted for the active in the beginning of this post is from the Active LIMITED it was their trial run before they changed it to the new Style
This is The New Active Case

Seidio Innocase II Surface for Atrix - Review

I've been using Seidio products for quite a few years now on my phones. It started back with the Blackberry Pearl. Since that first experience, I had decided that this was a brand of protection I was going to use on all future phones. Of course, that didnt keep me from trying others as well, just knew it would be the one I would keep.
Most recently I picked up a Motorola Atrix to replace my Nexus One. The whole time I had my Nexus One it was shielded with a Seidio Innocase cover. Unfortunately, when I picked up my Atrix there was no Seidio available, yet. In that time I decided to pick up the Otterbox Defender case. I had never used an Otterbox case before but after receiving the product, I deemed it way too bulky for my daily use and promptly put it back in its packaging.
My favorite parts of Sedio Cases are that Innocase II Surface is designed to protect your phone from scratches and drops while barely adding to the size of your phone. Many users find their sleek design easier to grip than a bare device due to their signature soft touch finish, which enhances the look of the phone and does not attract lint. This is huge for me because I put my phone in my pocket most of the time. This case easily slides in and out of the pocket without sticking or creating more bulk. The Otterbox had a soft rubber outer seal which stuck to the pocket and constantly needed cleaning of lint.
One of the other design features I've become quite fond of is their unique slide-in design which makes putting on and removing your case easy. One piece slides on the top and then the other the bottom and they form a clasp that holds together. This is much easier than the Otterbox which is multiple pieces with an additional piece surrounding all of that. If you ever have to do a battery pull, you know how frustrating it is when you cant get your case off easily. That being said, the Innocase is not simple protection either like a cheapo case you pull off the rack and fit the phone into.
I also liked that I have full access to the screen. I dont use any screen protector and the edges of the Innocase are raised just enough that if I placed the phone face down, the screen wouldn't touch. However, if I chose to put on some type of film, it wouldn't inhibit the use of the case either. Unlike with the Otterbox, it has the film built into the case which would sometimes create blotches where it touched the screen.
When using the case it immediately felt comfortable and while I noticed slightly more material to grip the phone with, I was still able to use all the buttons with ease. The fingerprint reader opening is designed so that the finger easily slides in the same manner as without the case, yet still protects it. The volume buttons were easily manipulated as well and all the ports were very accessible yet clearly protected.
The only downside to this case, and pretty much any other case out there, is that it does need to be removed in order to fit into a dock. I have the standard dock and no matter what angle I tried, the phone with the case on wont fit. Again, this is a situation where having an easily removable(yet sturdy) case is a lot less frustrating than a more difficult one. Especially if you're using the dock every night.
EDIT: As pointed out by another member, the dock DOES work. I had no clue the base of the dock pops out to allow more access to the USB pin via phones with cases. So even with the case on, it WILL work on the bedside(standard) dock.
Overall Im very happy with this case and is the one I've been waiting to come out for the phone. The other nice thing about the Seidio cases is their matching holster. These are just as slim without the bulk. Plus the have the ability to lock the phone into the holster, thereby eliminating accidental removal.
There might be other designs or knockoffs of this product, but there really is only one Innocase.
Please find pictures below comparing the case with the phone, my old Nexus One with a Seidio Innocase II and an Atrix Otterbox Defender case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanks for the review! i've been hoping to see some non-seidio pics of this for a while. do you happen to have any full-case shots of it without any comparison cases? i.e. just the phone and case itself, also the back of the case, etc?

dLo GSR said:
thanks for the review! i've been hoping to see some non-seidio pics of this for a while. do you happen to have any full-case shots of it without any comparison cases? i.e. just the phone and case itself, also the back of the case, etc?
Click to expand...
Click to collapse
The first picture should be of just the phone and the case side by side. Ill post a pic of the back of the case shortly. Are there any other case shots requested?

thanks for hte review, i had the innocase for my captivate and the one thing that really bothered me was how the lip on the edge of the case around around the screen is raised so dirt always got trapped between the screen and under the edge of the case. is this a problem with the atrix?

neotekz said:
thanks for hte review, i had the innocase for my captivate and the one thing that really bothered me was how the lip on the edge of the case around around the screen is raised so dirt always got trapped between the screen and under the edge of the case. is this a problem with the atrix?
Click to expand...
Click to collapse
Ive never had any issues with dirt getting trapped under my Seidio cases. I can tell you that with this Atrix case, its very form fitting and Id be surprised if dirt got under the edge.

This seems an awesome review for the seidio case for the ATRIX... Can someone suggest a nice and (cheaper ) place where I can get this awesome piece of hardware??

HyperM3 said:
Ive never had any issues with dirt getting trapped under my Seidio cases. I can tell you that with this Atrix case, its very form fitting and Id be surprised if dirt got under the edge.
Click to expand...
Click to collapse
I disagree with what you are saying. Dust gets trapped there like any other case that is raised like that. It's not a huge problem for me, but I find myself detaching the case and just wiping quickly when my pockets are too linty. But it isn't a huge problem for me.

If anyone is interested. The black case with bundled holster/clip is shipping now. The colored ones were still showing "Soon". I have it on the way.
I did not see anything on the clip in the OPs review, so when i get it i will followup with pics.

I also had an N1 with the same case. BEST case ever, is correct. I need to know if the Atrix combo will work with the car dock?
Sent from my MB860 using XDA App

I had a Seidio on my Nexus 1 and loved it. This one is just as nice. My only gripe is how tough it is to remove. The N1 case had a little give, this one won't budge. For me the only way to remove it was to slip a plastic shim under the locking tab.

Phutchi said:
If anyone is interested. The black case with bundled holster/clip is shipping now. The colored ones were still showing "Soon". I have it on the way.
I did not see anything on the clip in the OPs review, so when i get it i will followup with pics.
Click to expand...
Click to collapse
Here are pics with the case and the clip.
So far so good. I am very pleased with this case/clip. I have to carry 2 phones and my old holster seemed to just be too bulky.
The phone sits in it securely
Its sturdy, the clip is secured with a brass rivet and not a plastic one so should take a lot of force to break.. The clip swivels so you can have it Vert or Horiz on your belt.
The spring on the top does not seem to have the same tension as the one for my blackberry so I have been nervous about setting it horizontal.

Phutchi said:
Here are pics with the case and the clip.
So far so good. I am very pleased with this case/clip. I have to carry 2 phones and my old holster seemed to just be too bulky.
The phone sits in it securely
Its sturdy, the clip is secured with a brass rivet and not a plastic one so should take a lot of force to break.. The clip swivels so you can have it Vert or Horiz on your belt.
The spring on the top does not seem to have the same tension as the one for my blackberry so I have been nervous about setting it horizontal.
Click to expand...
Click to collapse
heh it looks like your speaker grill has the fignernail indent from thinking it was the power button? you can easily press/smooth it back out next time you have your battery cover off. it bends back just as easily

joeryu said:
heh it looks like your speaker grill has the fignernail indent from thinking it was the power button? you can easily press/smooth it back out next time you have your battery cover off. it bends back just as easily
Click to expand...
Click to collapse
Ya I got that trying to use the phone at 3am. I have a very loud and annoying notification set for an emergency email address that use for work. It went off and i had a hell of a time waking it up

I just ordered this case after spending 3 days with the Otterbox Impact. Otterbox makes excellent cases, but the Impact is just a silicone case that doesn't fit as snug as I wanted.
Hopefully it will be as good as people say when it arrives in a few days.

I just ordered it too - should be here around Wednesday. I'll report back with my findings. Based on your review though, I'm pretty excited about it. I don't normally spring for cases.

It arrived today!
It's sweet. I'm too lazy to post pictures.
It's a super snug fitting case, and it's not obnoxiously branded (ahem, speck cases), and it has a good feel in your hands. It also barely adds on any thickness to the already very thin Atrix.
All in all an excellent investment in my opinion.

i am from Argentina, anyone know if they shipping? as charged? many
thanks!

Hey guys! I just got my case in the mail today and after using it for a full day, I can say that I love it.
The added bulk isn't too noticeable. In fact, I find it easier to grip the phone with the case on. The soft-touch plastic is wonderful, though it does stick a bit when I put it in my pocket.
One nice touch I've found, whether intentional or not, is that the case helps direct sound from the back speaker. I found watching shows on my phone to be noticeable louder.
10/10!

I've been through a few cases since I got my Atrix. This one is BY FAR the best I've used so far.
DK

Ringke SGSII Case

Recently got this case as an alternative to the Otterbox case that I have. At times, I found that the otterbox was too bulky to have in my pocket and I wanted a case that preserved the slimness of the handset. After picking up a generic TPU case from ebay, I wasn't satisfied with the cutouts; specifically the two microphone cutouts. it muffled it so people weren't able to hear me talk.
Enter the Ringke case. It was obviously more expensive than a $5 from ebay at 16.99, but the notion of a non-slip polymer like a TPU case had appealed to me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After putting it on my phone, I immediately noticed the difference between the two cases. The cutouts on each of the ports was perfectly fitted with space at the bottom of the case for the home button, which is a nice touch
The lanyard port on the side was also included, unlike both the otterbox case that I have and the TPU case.
On the top, the headphone jack port is easily accessible. I was able to plug in my grado sr80i headphones without having any issues like I did with the TPU case. The external mic port is also well placed.
The material used to make the case is not just silicon. There is a special polymer material that allows it to slip in and out of my pocket easily. It also doesn't attract dust like other silicon cases. The only gripe I have with this is that since I got the mango colored one, the dye from my jeans rubs off onto the material.
All in all, I'm happy with the case and would definitely go back to Rearth for any other silicon cases.

COUPON CODE: weare2cool
20% off for a limited time!

georgeism said:
COUPON CODE: weare2cool
20% off for a limited time!
Click to expand...
Click to collapse
Or just be one of the lucky ones to get a PM at XDA from the owner who wants you to try his product
Mine's in the mail!

rickytenzer said:
Or just be one of the lucky ones to get a PM at XDA from the owner who wants you to try his product
Mine's in the mail!
Click to expand...
Click to collapse
Owners can feel free to send me products for review. I'll ensure a well detailed and document and honest review!

that's great! i dont mind paying the sub $20 it came out to if OP's review is accurate!

My turn!
So today I got my RearthUSA Ringke Galaxy S2 case in the mail. Chuck from marketing had initially contacted me a few weeks ago via XDA PM to ask me to try and rate/review the Ringke product for the S2 and he has been very friendly/courteous all throughout this process.
The first thing that came to mind when I saw this case was: WOW. This is definitely a high quality product. The material (a high quality polymer, as they say) feels great on the skin and slides easily in and out of a pocket. The polymer also makes the case extremely flexible making it very easy to put on. It also shines nicely in the light. I got a blue one as, you'll see below in my album.
I love the look of it. I love how it fits so well with the contour of the phone. I love the intricate details in the design such that it moulds well with every nook and cranny in the device's design.
Every single thing that you need access to has an opening: the USB port, the microphone, the camera, the speaker, the headphone jack and three more for things I can't figure out but are definitely part of the phone (except for the one at the top right, couldn't figure that one out at all). And they are done EXCEPTIONALLY well; no rough edges at all.
The volume rockers and power button feel great. They're really tactile unlike some other cases where it feels like you're forcing the case into the button to press it.
The pictures I took are really big and look bad in a forum, so here's a direct link to the ImageShack album I made:
http://imageshack.us/g/52/img0987ab.jpg/
I obviously got this product for free, but it only costs $16.99 with FREE SHIPPING. If I were to suggest a case to anyone, it would be this one. The unfortunate thing for me is that I don't use cases because of my car dock. I find it annoying to have to take the phone out of the case AT LEAST two times a day, every day. It's funny, because this is a free product that I didn't think I would care much about, and I'm honestly upset about the fact that I can't use it. I may try for a few days to see how much of a nuisance it is to be constantly taking it out and putting it back in.
I WISH this case fit with my official S2 car dock.
http://www.rearthusa.com/Galaxy-S-2-_p_252.html
GO GET YOURS, FOLKS!

georgeism said:
COUPON CODE: weare2cool
20% off for a limited time!
Click to expand...
Click to collapse
too bad the code didn't work for me......

ThaiM said:
Owners can feel free to send me products for review. I'll ensure a well detailed and document and honest review!
Click to expand...
Click to collapse
Yeah U_U I want to review products too

rogconnect said:
too bad the code didn't work for me......
Click to expand...
Click to collapse
It worked for me

Has anyone tried both the Ringle and the SGP ultra silke? My SGP ultra silke seems too loose and I would like to get a tighter fitting case.
Cut outs and buttons on the SGP are superb and the Ringke looks equivalent.

arisk2 said:
Has anyone tried both the Ringle and the SGP ultra silke? My SGP ultra silke seems too loose and I would like to get a tighter fitting case.
Cut outs and buttons on the SGP are superb and the Ringke looks equivalent.
Click to expand...
Click to collapse
Both are a bit loose as both are very thin silicone..cut outs are perfect with both
For a tighter fitting you must try a tpu case...

I thought I would share with you the Maroon coloured version of the Ringke case. I also purchased the Ringz audio cap along the case. Overall I like the case and recommend it. The surfaced etching layer on top of the high polymer really gives the case a nice feel that does not attract dust or fingerprints. I was disappointed to find out that Rearth now do micro USB caps after I have purchased the case. I would of like these as well and the expensive delivery charge to international countries is preventing me from doing this.
The only minor drawbacks of this case is it is not going to fully protect your phone from major drops. The top microphone cut out is not centred and it is slightly loose around the volume and power button. Not sure how long the material is going to last but I hope it will last the entire life of the phone.

After using this case for over a month now. The material is starting to get sticky on the corners. This is a shame but I guess once a silicone case always a silicone case regardless of any coating.

free cases, bah! I pay for all my cases and may review them anyway.
free good for review= good review.
Top right corner is missing because its for korean version. Wrong case or wrong phone?
Ringke should have maybe made a tiny lanyard hole in top of case to connect 'lanyarded' jack plug. Same with USB plug. So plugs can't get lost. Furthermore, the plugs should come with the case as default. Not too much to ask for that price. I mean the price that other people pay for the case. But nice review, pretty nice detailed case. Like the speaker detail. NOT top right corner. Do they make this case with all 4 corners protected?
Flashing your galaxy, press Y to continue..

Boxwave Case + Holster with Kickstand Review (Pics)

Hey everyone so I just received this case and I wanted to give you guys a rundown on what I think about it.
So the case in question is this one. As you can see from the pictures it is a hard 1-piece case that snaps on to the phone, as well as a holster with a soft fabric lining that will not scratch the screen, and a kickstand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case itself is very nice. It has a good solid fit with the phone, no moving or sliding off here. It is made of a rubberized material that feels good in the hand, and the texture on the back provides a good grip. There are cutouts for the power and volume buttons so they are easy to press. As with most cases of this style, the top and bottom of the phone are exposed, BUT the case goes around the corners and extends off the top/bottom ever so slightly, that the case should absorb the main blunt of the impact, should the phone land on that position. The case comes up about 1mm off the screen so that the screen will not touch the surface if you place it face down. All in all I like the way it looks and feels, and I feel it provides adequate protection to the phone.
The holster is made of the same material as the case. Once again, the finish feels good in the hand. It has 3 "arms" that secure the phone in place when it is in the holster. It snaps into place and it feels secure and sturdy. The phone can be put into the holster with either the screen facing in or out. There is a soft fabric material on the inner side of the holster that protects the screen from scratching when the phone is mounted with the screen facing in. The clip on the holster is the star here, because it doubles as a kickstand. It rotates 180 degrees which allows you to position it any way you want. You simply open the clip and pull out a metal prop to keep the clip in its open position, and you've got yourself a kickstand. Another useful feature is that you can mount the clip onto the vents in your car to use it to hold the phone while using GPS navigation. This is really handy for those of use who live in a state where it's illegal to mount a GPS device on the windshield. Once again the holster is superb and incredibly useful.
Overall I'd definitely recommend this case to anyone who wants something sleek that doesn't add a lot of bulk, but that still wants good protection against drops. The holster with the kickstand makes it great for watching movies and videos. And the fact that you can mount it on your car vents for GPS navigation make this an awesome product. I definitely recommend!
WARNING:There is a similar case for this phone on eBay, but it is NOT the same! DO NOT BUY IT! I bought both and the eBay one is garbage! It doesn't even fit properly, adds a lot more bulk, and you can't mount the phone on the holster with the screen facing out (essentially making the kickstand feature useless!!).
Here is how to tell the difference: The ebay ones have only TWO "arms" to secure the phone:
And they have a SMALL cutout by the speaker, instead of a big one like the Boxwave one:
Don't buy the ebay ones they are garbage (unless you find a boxwave case on ebay). Don't make the same mistake I did.

Nice review. Now only if someone would make an ultra thin snap on case with a kickstand. Had one for my iphone and loved it.
Sent from my SGH-T989 using XDA App

Yeah I also wanted something thin that didn't add a lot of bulk. I think this fits that need.

It is nice and it doesn't add too much bulk. I just wish it had a locking clip on the top. Great buy for $13 bucks.
Sent from my Xoom using xda premium

I really appreciate the review. It's EXACTLY the case i want. I've seen the boxwave for the Galaxy Nexus and Iphone up close first and and really like them. I also saw the cheap knockoff on the iphone and after one drop and keeping it in the pocket, the exterior matte finish was wearing off badly.

I have this Boxwave product as well. It's very nice. The stand feature works well and this case doesn't add much bulk at all. It's keeper.

Just thought I'd give an update. My boxwaves matte finish is wearing off after one week of use.
Sent from my Nexus One using xda premium

ive had 2 of them...although the case itself is nice and i really liked the belt clip and overall design..they are only like $12 on ebay, you get what you pay for...the belt clip broke off on both of them and i wasnt even doing anything...just a small nudge and the cheap plastic that holds it broke...i have given up on this case/belt combo...now im back to the old tpu case i bought and it works a lot better, i dont have to worry about breaking it

Not impressed.... Seidio is much better and you can order a holster too. Great fit and quality. Highly recommended.
Sent from my SGH-T989 using Tapatalk

I ordered a sgs2 yesterday since it was free .. don't have the phone yet but I actually was looking at this along w a tpu case. I like the holster look but wanted protection for top and bottom too. I was wondering if anyone knows if a tpu case can fit it in.
Sent from my NexusHD2 using XDA App

qdochemistry said:
I ordered a sgs2 yesterday since it was free .. don't have the phone yet but I actually was looking at this along w a tpu case. I like the holster look but wanted protection for top and bottom too. I was wondering if anyone knows if a tpu case can fit it in.
Sent from my NexusHD2 using XDA App
Click to expand...
Click to collapse
yes, i had this
http://www.ebay.com/itm/SOFT-GEL-TP...182019?pt=PDA_Accessories&hash=item589236b983 from another seller on ebay
and this (broke the belt clip off by accident)
http://www.ebay.com/itm/Case-Samsun...583185?pt=PDA_Accessories&hash=item53eb563d91
the slightly different version of this holster....there is little bit of extra space though..very very slight...it wont fall out by might move slightly...works well if you dont mind the extra space

Thanks .. I was thinking of the exact same tpu but in clear/white but I guess the black you got looks better with the holster. Can't wait for the phone to come home and okay with it ;-)
jdiddy_ub said:
yes, i had this
http://www.ebay.com/itm/SOFT-GEL-TP...182019?pt=PDA_Accessories&hash=item589236b983 from another seller on ebay
and this (broke the belt clip off by accident)
http://www.ebay.com/itm/Case-Samsun...583185?pt=PDA_Accessories&hash=item53eb563d91
the slightly different version of this holster....there is little bit of extra space though..very very slight...it wont fall out by might move slightly...works well if you dont mind the extra space
Click to expand...
Click to collapse
Sent from my NexusHD2 using XDA App

Btw .. you mind giving some input on the quality of that belt clip and is it good enough for day to day use? I actually like the seidiko combo better but since I paid 6 bucks (shipping) for tis phone after instant rebate and waived upgrade fee .. it doesn't seem justified to spend $45 for a case to go on a $6 phone ... but if the clip is too weak I might just give in and invest in something more sturdy.
Thanks for the info!
jdiddy_ub said:
ive had 2 of them...although the case itself is nice and i really liked the belt clip and overall design..they are only like $12 on ebay, you get what you pay for...the belt clip broke off on both of them and i wasnt even doing anything...just a small nudge and the cheap plastic that holds it broke...i have given up on this case/belt combo...now im back to the old tpu case i bought and it works a lot better, i dont have to worry about breaking it
Click to expand...
Click to collapse
Sent from my NexusHD2 using XDA App

jdiddy_ub said:
and this (broke the belt clip off by accident)
http://www.ebay.com/itm/Case-Samsun...583185?pt=PDA_Accessories&hash=item53eb563d91
the slightly different version of this holster....there is little bit of extra space though..very very slight...it wont fall out by might move slightly...works well if you dont mind the extra space
Click to expand...
Click to collapse
That's the knockoff the op was warning about, isn't it?

yes, its the knockoff...i bought it first a long time ago...broke the belt clip off of it...then saw the other one..bought it, and just recently broke the belt clip off of that one as well
the knockoff is just as good except for 1 thing..the phone doesnt fit with the screen facing outwards...so you cant use it as a kickstand to watch videos...if your looking for a case/holster it does the job just the same
my conclusion after buying both (and breaking both) is that the case/holster is nice but delicate...both times i broke it i was barely doing anything..i just tapped it and the cheap plastic tab that holds the belt clip broke off
i ended up spending like $28 total for both...and im back to my old TPU case and leather pouch...i dont have to worry about breaking the pouch..ive had it for like 2 years already..used it with my vibrant and it also fits the SG2..im sure the seidio combo is a lot more durable
also, if you got the SG2 for free thats great..however that doesnt change the value of the phone..its still a $600 phone, if you really want to protect it you gotta spend the $$...consider yourself lucky to be able to get the SG2 and a great case for only $51

jdiddy_ub said:
also, if you got the SG2 for free thats great..however that doesnt change the value of the phone..its still a $600 phone, if you really want to protect it you gotta spend the $$...consider yourself lucky to be able to get the SG2 and a great case for only $51
Click to expand...
Click to collapse
Yeah I agree .. i actually like that seidio case too and it looks sturdy enough. I guess seidio it is

1 huge problem I experienced: The phone is not clipped into the holster and will pop out with when the moons line up. I wear mine horizontally and the moons lined up the other day and it hit the ground ... and when the sleeve hit the ground, the phone popped out too.
Other than that, everything else was cool but since this a biggie for me, I'm on the prowl for another case.

nooooooo!!!! i wish i saw this thread sooner. already ordered the ebay one...

Cases with Kickstand?

I really like the case mate http://www.case-mate.com/Samsung-Ga...te-Samsung-Galaxy-S3-Pop-with-Stand-Cases.asp but can of the owners give me its reviews?
AND
Any other ones?
The issue is, I am yet to receive 2 of these and afraid that it might not fit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Amazon Aduro Case
Aduro Shell Holster Combo Case, found on amazon.
I have had this case for a week now. I really like the styling and it feels good; however, it is a snap on case and i'm not sure how the top and bottom edges on the phone will hold up in a fall.

Kickstand Case
I'm also looking for a good case with a kickstand for the Samsung Galaxy S3. Wasn't sure if I should start a new topic, so decided to post here first.
I don't use a phone dock, so the size of the case doesn't concern me. Would like full protection. (top and bottom edges covered) Any feedback would be appreciated. Thank you. (Can't post outside links, sorry)
Here are three that I've found. Does anyone know of others?
Case-Mate Pop Case W/ Stand
Concerns: Some of Case-Mates cases bulge out around the edges after a short while. I also wonder about the durability of the kickstand on this case.
Seidio Active with Metal Kickstand
Concerns: Kickstand does not support device in portrait orientation. (Not a deal breaker though). I've never owned a Seidio case, so I personally don't know how quality they are.
TALKonline ProGel SOLID Super Hydro Gel Case W/ Stand
Concerns: Same as the Seidio, I've never owned a case from this company, so I don't know about the quality.

purk said:
I'm also looking for a good case with a kickstand for the Samsung Galaxy S3. Wasn't sure if I should start a new topic, so decided to post here first.
I don't use a phone dock, so the size of the case doesn't concern me. Would like full protection. (top and bottom edges covered) Any feedback would be appreciated. Thank you. (Can't post outside links, sorry)
Here are three that I've found. Does anyone know of others?
Case-Mate Pop Case W/ Stand
Concerns: Some of Case-Mates cases bulge out around the edges after a short while. I also wonder about the durability of the kickstand on this case.
Seidio Active with Metal Kickstand
Concerns: Kickstand does not support device in portrait orientation. (Not a deal breaker though). I've never owned a Seidio case, so I personally don't know how quality they are.
TALKonline ProGel SOLID Super Hydro Gel Case W/ Stand
Concerns: Same as the Seidio, I've never owned a case from this company, so I don't know about the quality.
Click to expand...
Click to collapse
Awesome, came across this link
http://www.squidoo.com/galaxy-s3-cases-with-stand

Sloshykarma said:
Aduro Shell Holster Combo Case, found on amazon.
I have had this case for a week now. I really like the styling and it feels good; however, it is a snap on case and i'm not sure how the top and bottom edges on the phone will hold up in a fall.
Click to expand...
Click to collapse
I've got this one as well and love it.
Sent from my SAMSUNG-SGH-I747 using xda premium

I have a Case-Mate Pop.
Pros:
1. Fits great.
2. Rubber side grips are great.
3. Push buttons work with zero problems.
4. The case totally surrounds the phone (except for the ports).
5. Rubber extends above the glass, so you can place the phone face down.
Cons:
1. The kickstand only works with the phone in a horizontal position. It does not work when the phone is vertical.
2. When placed on a table face up, the plastic part of the cover rests on the table. So, the plastic gets scratched over time.
3. Not a huge deal, but I wish it had covers for the power and earphone ports to keep them clean.

I got a TPU/plastic one off ebay for $7.50 and am liking it. I posted it about it at the other thread... http://forum.xda-developers.com/showpost.php?p=28547621&postcount=17
I've been using the dry-application screen protector that came with it and so far so good. It doesnt cover the whole front, since the screen edges are slightly curved, but it works. I also was in a hurry so just put the screen protector plastic that came with the phone on the back before stuffing it into the case just to protect from wear marks, etc. It has a side-effect benefit of covering the camera lens w/o seeming to affect image quality.

purk said:
I'm also looking for a good case with a kickstand for the Samsung Galaxy S3. Wasn't sure if I should start a new topic, so decided to post here first.
I don't use a phone dock, so the size of the case doesn't concern me. Would like full protection. (top and bottom edges covered) Any feedback would be appreciated. Thank you. (Can't post outside links, sorry)
Here are three that I've found. Does anyone know of others?
Case-Mate Pop Case W/ Stand
Concerns: Some of Case-Mates cases bulge out around the edges after a short while. I also wonder about the durability of the kickstand on this case.
Seidio Active with Metal Kickstand
Concerns: Kickstand does not support device in portrait orientation. (Not a deal breaker though). I've never owned a Seidio case, so I personally don't know how quality they are.
TALKonline ProGel SOLID Super Hydro Gel Case W/ Stand
Concerns: Same as the Seidio, I've never owned a case from this company, so I don't know about the quality.
Click to expand...
Click to collapse
Seidio makes some of the best cases on the market. No doubt about it. I don't know about their kickstands but their cases are top notch.

Thanks for the feedback. I found a few other kickstand cases, but I still haven't made a decision. Dont really like any of them.

I have the case mate so far it's good, but I only been using it for two days. Ill keep posted.
Sent from my SAMSUNG-SGH-I747 using xda premium

I have a Case-Mate Pop and a Seidio Active. The Active's kickstand is heavier duty and the CM's kickstand is flimsy, but it is functional. However, I would not necessarily say that the Active is a better cover than the Case-Mate. I like the Case-Mate more than the Active, but I use the Active because I need to hang my phone on my belt. I preordered a Trident Kraken.

Has one tried this case http://www.ebay.com/itm/Black-Hard-...140748?pt=PDA_Accessories&hash=item19d524cb4c before?

May2012 said:
I found a awesome one at http://www.ebay.com/itm/Fosmon-Sams...106772?pt=PDA_Accessories&hash=item43b1d18394
just for US $6.95
Click to expand...
Click to collapse
I bought this case and I kept it on for about 30 seconds. It really made the phone feel cheap.
Currently not being productive on my S3.

If youre just looking for the kickstand feature, I'd recommend getting FlyGrip, a tad bit pricey though.

angie4u said:
I recently purchased Aduro Shell Holster Combo with Kick-Stand from amazon because my husband thought it'd be nice to have a holster... but anyway... im a bit disappointed in general. First of all, the packaging... maybe cuz im picky but i didnt like that it came in a plastic baggie. The kickstand seems cheap and easily breakable. One thing I like is it's pretty grippy cuz of the material. Don't think it'll provide much protection from drops though. We read some good reviews on amazon, which is why we purchased but... it's mediocre at best imo. But my husband likes the back, me not so much. Here are some pictures:
]
Click to expand...
Click to collapse
I just received the same case although it was branded as a "JKase" and was 5 bucks cheaper than the Aduro branded one. It's actually pretty good and the holster also seems okay. I'm not sure of the sturdiness or longevity of this case and holster but so far so good.