Hi does anybody know how to use the tv out cable with screen turned off?
Because when i watch videos i don't need the screen on my device only the screen on my tv but when i press the power button so the screen will shut off the connection with the tv goes down. Any ideas ?
It seems that when the screen is off, you loose the TV out. (I tried just turning off the screen without sleeping the device). The only suggestion I can think of is finding a way of turning off (or down) the backlight - this will save just as much power as turning off display.
Related
Everytime im done with my Ouya, I go to the main screen press Y and choose "turn off ouya". I know that the ouya shuts down because the input on my tv goes blank and says that no source have been found. Now when I try to turn on my ouya,lets say about 1.5 hours later my ouya is already turned on and is asking me to shut down.
Why is this happening to me? Am I not shutting down correctly?why does the ouya turn itself on?
Sent from my LG-LS970 using Tapatalk 4
EFEXR said:
Everytime im done with my Ouya, I go to the main screen press Y and choose "turn off ouya". I know that the ouya shuts down because the input on my tv goes blank and says that no source have been found. Now when I try to turn on my ouya,lets say about 1.5 hours later my ouya is already turned on and is asking me to shut down.
Why is this happening to me? Am I not shutting down correctly?why does the ouya turn itself on?
Sent from my LG-LS970 using Tapatalk 4
Click to expand...
Click to collapse
Wish I could answer, but at least I'm glad to know I'm not the only one running into this issue. I'll do the exact same thing to shut down, and notice my TV's input still shows active, I'll switch back, and it's asking to shut down Ouya / Controller / Cancel. I'll do the shutdown again, and then wait for it to show No Signal on my monitor. I hope this will be also be addressed by a future update...
When you shut off with the menu options ouya is actually going to a low power sleep mode instead of turning off - similar to a android tablet or phone when you just push the power button or close a case cover, the next time you push it it is an instant on instead of a boot process.
Apparently it failing to stay asleep has something to do with the HDMI interface, though I can't technically confirm or deny this I do know it's entirely possible.
The only way I've found to actually shut it off is to either hold the power button for a few seconds until it shuts off, or pull the power plug (not recommended.)
Or root, install QuickReboot and shutdown with it...
Envoyé depuis mon Galaxy Nexus avec Tapatalk 4
I am facing the same issue. I did changed the HDMI cable with some other one. this is weird:cyclops:
joeblowma said:
The only way I've found to actually shut it off is to either hold the power button for a few seconds until it shuts off, or pull the power plug (not recommended.)
Click to expand...
Click to collapse
This actually works. Thank you.
Hdmi activity wakes up OUYA, many TV's scan inputs so they don't list them in "source" menu and this turns OUYA back on. A poorly thought out feature.
Rather than doing a hard shut down, you can do a full shut down by holding the power button for a full second or two. You will then get an on screen prompt to confirm shut down, this will do a full shut down not just put it to sleep like it does when you use the controller to initiate it. Constantly killing power to a running system will probably start corrupting files at some point.
There is also some sort of sleep or screen or keep awake option in advanced settings that is supposed to disable the hdmi wake up.
Sent from my SCH-I535 using Tapatalk 4
I was browsing through the forum to see if anyone has a similar problem, but this doesn't appear to be the case.
Since I updated my Note 2 (UAE version) to 4.3, my screen keeps turning off completely randomly (even when in the cradle). It just goes blank. Now - the phone doesn't go to sleep and I know that because if I play video, it still keeps playing (I hear the audio). When the screen goes off, I then need to push power button to turn off the screen and turn it on. If the video is playing, pushing the power button will of course lock the screen, so I actually first need to push home button to get out of the video, then power button to turn off the screen and then power button again to turn it on.
Am I explaining this well? So, the problem is not that the phone goes to standby, the problem is that the screen stops functioning and i need to push power button to put it into standby and then back from standby.
It is completely random - I can sometime work on the phone for hour and nothing will happen, and sometime it will happen after few minutes. It doesn't matter what I am doing, whether playing video, browsing web, checking email etc.
Anyone with a similar problem? Anyone, class, anyone? Bueller? Bueller?
I was just able to get what seems to be the last fire tv in amazons surplus through their prime now app. I set it up everything went fine then I clicked to update it and it did the normal update process until I looked up and saw a black screen. I unplugged the unit and replugged it and now all I get is amazon logo then black screen. Is there anyway to fix this I was really excited about having the last fire tv. Something I just discovered is that I can still connect wirelessly to the unit via adb.. I just restarted it. I dunno if this can help anything.
PROBLEM SOLVED faulty hdmi cable... This cable was sent to me from mono price about a week ago as a replacement for another defective cable.. sigh...
danknasty said:
PROBLEM SOLVED faulty hdmi cable... This cable was sent to me from mono price about a week ago as a replacement for another defective cable.. sigh...
Click to expand...
Click to collapse
To fix the black screen/blank screen, we use the following steps to troubleshoot it:\
Your FireTV went to sleep and you just need to wake it up. You can wake up your FireTV by pressing the “Back” button on the remote.
Try the Fire TV Remote Shortcuts to see if one of them will wake up your Fire TV.
On the [easyazon_link identifier=”B00NO8JJZW” locale=”US” tag=”arizonacaorg-20″]Fire TV Remote[/easyazon_link], hold the REVERSE (or “rewind”) button and the UP button at the same time for 10 seconds. Your FireTV should start switching through the different video display modes (or resolutions). You can expect the light on your TV to change colors and/or blink. When it switches to a display resolution that works, press the SELECT button to select that mode. This will fix your display issue if your fireTV happens to be set to a video resolution not supported by the TV you have it plugged into.
Your FireTV needs to be reset to the factory default settings. To do this, press BACK and REVERSE and RIGHT and SELECT to get your FireTV to prompt you to do a factory reset.
Your FireTV is deceased. If you tried #1 and #2 above, perhaps your Firestick has perished.
You could be forcing a screen resolution such as [easyazon_link identifier=”B00V0923TG” locale=”US” tag=”arizonacaorg-20″]1080p[/easyazon_link] 60Hz. Try changing the display settings back to Auto, No Scaling (by hooking the FireTV to a [easyazon_link identifier=”B01CF3L3RS” locale=”US” tag=”arizonacaorg-20″]TV[/easyazon_link] that it’s known to work on).
Press SELECT & PLAY (Hold the buttons down for 5 or 10 Seconds) to restart your FireTV / firestick.
I hope it will help you out.
Hi,
My S4 SGH-M919 is having a problem where it appears to turn on, charge, and boot to the OS, but there is no response from the screen. The bottom buttons illuminate but the screen doesn't want to turn on. I've tried removing the battery and holding the power button down for an X-number of seconds, but this doesn't seem to do the trick.
Any ideas?
Thanks.
With the phone powered off, connect the phone to the charger. If you see the charging animation, sounds to me like the screen may be damaged or the LCD/motherboard connector is loose.
Was the phone every dropped or bumped?
I'm having some problems with my fire tv 2. It is rooted and on the latest rom found in this forum. The problem is with my unrooted fire tv 1, whenever I need to turn it on I can just press the remote and it will power on. With this new fire tv, pressing the buttons will not turn it on and when I turn on the tv and try it, it won't turn on as well. Only a small chance that sometimes hitting the button would turn it on. The only way that I usually turn it on is through unplugging and replugging the power cord. Is this a common issue and is there a fix? Thanks.