[Q] Fussy Desire? - Desire Q&A, Help & Troubleshooting

hi guys, ive been trying to try a few different AOSD roms on my S-LCD desire as i aint really a fan of Sense. the problem is after i have rooted and flashed LeeDroid (first rom i tried reccomended from a friend) i was then looking at the other roms OD, DeFrost, and CyanogenMod.
i tried flashing OD after nandroid and wipe rebooted and got an odd screen after splash screen, sarts black and then all these red green blue vertical lines start to pop up, after a while the phone reboots and then hangs on splash. it did the same with defrost.
i flashed CyanogenMod 6.0.0 through rom manager and all is well works no probs and i do love it.
then i notice DeFrost is available through Rom manager so try flashing from rom manager and the same old funny black screen pops up with multi coloured lines.
just restore back to cyanogen no probs.
BUT my phone also presented this problem flashing VorkKernel i tried the HAVS version and got the black screen and i now run one of the SVS versions. i then realised how his thread works and tried r7.1 but again had the black screen.
anyone any idea whats up?
cheers luke

this is a bit of a bump but anyone any ideas what may be going on cos now it seems i cant flash any rom even update cm6.0.0 to 6.1 :S slightly annoying

Well, as you have stated, you have an SLCD phone. That might be the cause of your problems. Have you tried roms made for SLCD?

ill have a badgers have a look for slcd specific roms. suppose i was abit naive in thinking new versions of roms would support slcd?
i will have a look but has anyone found any nice fast slcd specific roms? non sense

managed to flash CyanogenMod 6.1 now by flashing rom and then flashing VorkKernel before rebooting

Related

[Q] Weird colors after flash

Rooted using unrevoked. Flashed NeoPhyte 1.7.1 which was great. Flashed LeeDriod which was fine. Flashed pinky-desire-1.8, also fine. Flashed NeoPhyte 1.8 and got weird colors on all screens following boot. The boot animation colors are fine, clockwork recovery screens are fine but once booted the screen has flashing red horizontal bands and a red band on the notification bar. All colors are distorted as well.
I tried nandroid restore to NeoPhyte 1.7.1 - same problem. Tried reflashing Neo 1.8, same problem. In between I wiped everything I could find.
Any ideas? Is this a known issue? I have tried searching but to no avail so far. Any help gratefully received.
Chris
Were you running an OC kernel at all? Sounds like something has fried, especially since you went back to a "known good" ROM from a previous flash.
Thanks, as far as I can tell from the threads none of the ROMS I flashed OC's the chips. Also, which may indicate a software fault rather than hardware, the boot animation screen, which for Neo is pretty colorful and animated to cover most of the screen, is fine. Maybe this is just wishful thinking...

[Q] Process system is not responding - Force close or Wait

Hi there
I think I destroyed my CPU or something ... I used a custom kernel which does OC and UV and it worked without any glitches for about 8 hours.
Then it froze and now I cannot boot any rom.
If there is user data it boots to a frozen lockscreen.
If I do a factory reset it says that the Process system is not responding...
Anybody got an idea?
I just flashed the official SLCD RUU and now it works again ...
I can only run official ROMs
If I root and flash a new one, the same error persists!
anybody any idea?
I cannot really tell HTC to replace my phone, it works with their froyo version :S
but I don't like Sense and now I'm stuck using it ... hate that -.-
Well you rooted with an RC of unrevoked. Could as well have something to do with that. Have you tried custom sense roms? Just to see if they work. Else, i would try the downgrade-to-hboot-0.83-method.. just practice the screenless method with the screen turned on, i managed to do iy in one attempt (H)

[Q] HELP! Can't flash any Sense Roms

No idea why this is happening, I have a rooted/s-off'd SLCD desire, has been working fine up until the point I flashed the N1 table to use with Oxygen, Oxygen installed and worked fine. I then decided to go back to Aurax and wiped/flashed but it sits on the splash screen and goes no further (no matter how long I leave it for), I then tried Leedroid, same thing, I also tried a Sense HD rom, same problem.
I then flashed back the Sense table and tried again, same problem, just sit's on the splash screen.
I can flash non-sense roms and they work perfectly (e.g. Miui/Oxygen/Defrost etc).
Any ideas?
Edit: I appear to have fixed it, flashed the Bravo Stock 1.5 img, rebooted bootloader and cleared cache.

sense 2.5 home screen locking up on imagio after flashing

hey guys looking for a little direction..
so where else would i go!
i finally got the girlfriend to upgrade her htc imagio rom.
first tried 3 different nrgz roms and then the project orange rom. i get the same problem
flashed fine laoded fine
ive narrowed the problem down to something with sense 2.5 ( im running project orange slim os 21895 with sense 2.5.2012)
the home screen freezes if i disable sense life is good. enable sense and the lock screen hangs the home screen freezes and i have to reset
im looking for a fix or something
i cant seem to find anyone else with this problem. am i blind
is it the phone? a little help would be great thanks guys
by the way is it possible there is something wrong with the phone itself? it did NOT have any trouble before the rom flash
Are you installing anything post flash? If so, re-flash, don't install/restore anything and test. If everything works, then install each cab one at a time and test. This will help you isolate the problem.
PS: If you want to try a different ROM, click my sig
i will be trying your rom !!! as for installing cabs and such.. nope havent installed anything yet cause we have been runnning into this problem after the first couple hours
that being said my guess is either there is a problem with 2.5 sense and the imagio or the phone may have a problem
i find it hard to believe that 3 nrgz roms and an other rom all have the same problem
but ill try yours and see if the problem goes away

[Q] Microphone stops working with latest roms

Right now my G2 is running Cyanogenmod-7.1.0 RC1. For the last few months any time I try to update past this version of the rom I lose my microphone. It works absolutely fine with 7.1 but when I go to 7.2 it breaks. For example, When I am on a call I can hear the other person but it is silent on my end. Voice recording programs do not work either, all that it records is a low level of static noise.
I have also tried CM9 and audacity beta4 with the exact same results. When I flash my phone back to 7.1 everything is fine.
Is there some way that I can flash just the old microphone drivers onto the new roms? I am competent enough to follow instructions but not enough to start breaking builds apart for the individual pieces so I don't know where to start.
I have always done a full wipe on everything before I flash.
Does anyone have any ideas? Thank you!
Currently I am running:
Radio: 12.52.60.25U_26.08.04.30_M3
Kernal: [email protected] #1
Mod: Cyanogenmod-7.1.0 RC1 vision
Build number: GRJ22
a
Didn't try any of those,
but this rom:
http://forum.xda-developers.com/showthread.php?t=1492461
works great on my HTC Desire Z with absolutely no issues
It does take a bit of customizing.
I've tried that rom as well but have a whole different issue with that one for some reason. I flash it and then start to reboot and once the phone gets to the white htc screen it freezes with a few horizontal lines running across it. I have to pull the battery and then flash back to my older rom. I have no idea what is going wrong there.
Here might be a dumb question...
Would it help to flash a new kernal? Are the appropriate kernals included in the roms already?
haymaker said:
I've tried that rom as well but have a whole different issue with that one for some reason. I flash it and then start to reboot and once the phone gets to the white htc screen it freezes with a few horizontal lines running across it. I have to pull the battery and then flash back to my older rom. I have no idea what is going wrong there.
Here might be a dumb question...
Would it help to flash a new kernal? Are the appropriate kernals included in the roms already?
Click to expand...
Click to collapse
Hi! Do you solve your problem? I have the same thing there. All the CM roms above 7.0.3 not working with microphone. Do you have still the Cyanogenmod-7.1.0 RC1 file rom and can you upload for me?
Thank you!

Categories

Resources