Related
OK the HTC ARIA has been around for a while now and one of the most pertinent objectives is screen protection. That having been said I think it's a good idea to poll people to find what cases and screen protectors have been handeling the masses needs.
I will put my 2 cents in here, starting the poll.
My daughters ARIA started out w/ a Zagg screen protector and Amizer case. Much to my chagrin the case fell apart. She never told me and the first time she dropped it, the screen shattered (though the Zagg screen protector did keep it in place) It's being replaced now and I hope to have a different one when she gets it back. I look forward to your thoughts and purchases. Good bad or indifferent
tomween1 said:
OK the HTC ARIA has been around for a while now and one of the most pertinent objectives is screen protection. That having been said I think it's a good idea to poll people to find what cases and screen protectors have been handeling the masses needs.
I will put my 2 cents in here, starting the poll.
My daughters ARIA started out w/ a Zagg screen protector and Amizer case. Much to my chagrin the case fell apart. She never told me and the first time she dropped it, the screen shattered (though the Zagg screen protector did keep it in place) It's being replaced now and I hope to have a different one when she gets it back. I look forward to your thoughts and purchases. Good bad or indifferent
Click to expand...
Click to collapse
My opinions:
The Aria is at its best without a case - it feels great in the hand and looks nice too.
I have a case I use occasionally. It is a TPU HTC-branded skin-like cover. It was less than $10 at Amazon, and fits perfectly. It only covers the back and sides, with cutouts for all the Aria external connections/controls. It makes the phone a bit more bulky, but it is about as thin as you can get. Slightly covers the edges where the glass screen meets the back
I don't use a screen protector (like Zagg). I'm tempted, but with a glass screen, I don't know how much it'll get scratched without one.
Again, just my opinions...
I too wouldn't bother with a case for this phone, I really don't see the need.
I would always use a screen protector. I know these screens are glass (even Gorilla Glass I think?) but they are not impervious to damage. You just know the first time it slips out of your hand and goes skating down the asphalt you are gonna wish you had one on because it WILL leave scratches!
As far as screen protectors go, I've used 'em all over the years and firmly believe the 'wet apply' ones like Zagg are the best. However, out of this style of screen protector I think Zagg is the worst - thick and rubbery and will give you orange-peel effect.
I personally use Bodyguardz and love them! Phantomskinz are also good and with both of these companies you get 2 sets for the price of Zagg's 1 set and a lifetime replacement warranty. Also with Bodyguardz, when you sign up and order you then get 20% off all subsequent orders.
http://www.bodyguardz.com/htc-aria-cases-screen-protectors-covers-shields-skins-films.html
http://phantomskinz.com/search.aspx?find=htc+aria
Good luck!
The amzer case is really good if you have a screen protector. It kind of leaves indents on my Aria, so I don't know if it'll scratch the glass. Best to get a screen protector regardless.
People say the case sucks because it's hard to take off, but theres a trick to it, just pull from the bottom left edge of the front frame. I've dropped my Aria almost 12 times. Still perfect, Its been 6 months. The matte finish does get worn though.
Just wondering because I stopped using them with the Captivate. I did get a RealLook when this phone was new but have since dumped it. I have carried the phone in my pocket with coins and even keys at times and nary a scratch. The glass is far better to slide on in its native state.
I never used cases because they made the phone thick and skins only protect against scratches which for a device I may have all of 18 months doesn't matter much. Its a handset not a work of art. LOL One of the features I like best is how thin the handset is and how slick the glass is in it's native state.....
The back case is nearly indestructible and easily replaceable.
So who else doesn't go for the $20 "screen protectors" and $20 cases? The only case I would think would protect a phone in a drop would be a very soft shock absorbing one that doesn't transfer the shck to the device anyway which collects crap and makes it difficult to get out of ones pocket.
As far as resale goes I found I may get $25-$50 less for a phone with wear marks. Less Money that would have been spent on "protective devices anyway...I sold a NEW in the box Captivate for $229 and a used one for $190 with wear...(and am currently looking for a beat up working Captivate for a spare.)
There are a lot of people who doesn't use a 20 US$ case or protective screen. But IMO, that's a bad idea. That screen could get scratched and it also could get damaged if you drop it. All depends on how you care the device. I think it's better to have a protective screen than having a scratch on it.
I care about myself and not on the 'bare' list. Have a protective screen and a CM Tough.
Regards.
ithehappy said:
There are a lot of people who doesn't use a 20 US$ case or protective screen. But IMO, that's a bad idea. That screen could get scratched and it also could get damaged if you drop it. All depends on how you care the device. I think it's better to have a protective screen than having a scratch on it.
I care about myself and not on the 'bare' list. Have a protective screen and a CM Tough.
Regards.
Click to expand...
Click to collapse
Same here. Why would I risk a 600$ device for a few bucks?
I don't care if my case make my phone thicker, I'll use a 3200mA battery anway.
Sent from my GT-I9100 using XDA Premium App
I've never used cases on phones but have ordered a Neo Hybrid today, should be with me by the end of the week...
Dropped the current bane of my existence a number of times, perils of being a biker...
Phone is Wednesday so I'll have a couple days with it bare, I'm optimistic that I'll be converted to a case user... The Neo looks great and before I got lumbered with the BB I was using a Desire so I'm used to that thickness anyway...
OK the question was for those WHO DO NOT use a case...I am well aware of the minions who are anal about scratches and dings or the worrisome drop now and then..
I just wanted to see how many do not use either and just use their handsets as they were designed. I understand completely why those who do buy cases and "screen protectors" do so. I also understand the fear factor used in selling "various highly technological" pieces of clear plastic for $10 for the Gorilla glass.
I actually tried to scratch my glass with a key and could not while a friend watched in horror. LOL "Scratch resistant" is an understatement for Corning's glass. A small scratch would not bother me if it did happen though. But I do know it would take a lot to do so.
I don't really like cases and screen protector. I did not use a case or screen protector for my sgs1 and its always kept in my pocket. After 5 months it got a small scratch on screen and around the casing. I sold it for £180 when I got GS2. I was not planning to get a case for it but after a week scratches on the back appear just from putting on top of the desk and moving it around. I had to buy a case for it which im not really satisfied. I recently bought another case barely there chrome but sent it back coz it looks cheap.
I would prefer no case if only sammy put a different finish on the back. I don't think gs2 will need screen protector as it is glass. it won't get scratch(i hope). If it drops and break. I'll just claim it on the insurance to get it sorted.
I like to feel the phone and how light and thin it is.
But when I'm not using it I have a Mofi case + a DIY Aluminium case to protect it.
+ I'm always very careful with my equipment.
I have dropped my phones (yes, in all of my phones in the past 4 years) a grand total of 2 or 3 times. I take very good care of my phones, but I always at least have a thin case. But one thing that I'll never do is go without a screen protector. If the back or sides scratch, oh well. Value dropped. But if the screen gets scratch, that would bother me until I get a new phone. It ruins the image. So when I'm about to get a new phone, I order off e-cell those cheapo screen protectors that work VERY well, which I never change because they do a very good job! They usually take about 4-5 days to arrive (from the UK to here in Spain). I like those screen protectors, too. Hehe.
I don't use a screen protector or a case. Had the phone about 3 months now, have developed some very light scratches on the screen which you can only see with the display off. I think they're in the oleophobic layer on the outside of the glass and not the screen itself.
Why? Because I can't stand the way a plastic screen protector feels, my finger drags across them and the image is always blurry.
DBA is a lesser-known company specializing in phone cases and screen protectors. One of their newer products, the "Just Like Glass®" screen protector promises to be the best screen protector you'll ever have.
Here's what Scott of DBA has to say about the screen protector:
We also had an independent third party test directly against ZAGG and destroyed them.
Testing with Laser Beams for distortion, regular glass of course had 0, Just Like Glass had 11.50, and Zagg had 666.
ZAGG doesn't even claim to increase the break resistance of the glass while ours has tested for an increase of near 40%.
In a wear test equivalent to putting it in and out of your pocket ZAGG showed wear after 345 times and our showed no wear even after 10,000.
ZAGG is more scratch resistant but at the cost of creating the distortion. And the difference isn't that great.
Just like glass screen protectors are stain proof. You can get makeup on the, dirt, oil, dye, etc... and you can wipe it off. ZAGG you can't. I personally tested ours with a black sharpie (not really the best decision looking back on it) and it did come off with a little elbow grease.
As far as being smoother than glass, if you use glass as the baseline Just Like Glass is 20% smoother while ZAGG was -147%. You can really feel it.
Ours don't have the orange peel effect that ZAGG does.
I wouldn't be doing this at all if I didn't have something that I would use and that was better than everything else.
Click to expand...
Click to collapse
It's a wet-application (like ZAGG), but the included application kit makes it easy. This protector covers the viewing area, allowing it to work with cases perfectly.
It looks very promising and costs only $13.50 (by comparison, the ZAGG protector is $14.99).
Here's the site: DBA "Just Like Glass®"
I had a heck of a time getting it out of the plastic and in the process it got dimples from trying to pull it out. I contacted them to see if they will get a replacement sent out what a bad experience because they decided to make the plastic bag it comes in too damn tight with no leeway at all. The other con I noticed is it says to use a hard card but it does not come with one so I used the squeeze I have from Skinomi that I used on the Transformer Prime tablet.
Now I do have to admit it does feel like glass and not the soft rubbery feel I am use to with my mothers Skinomi. I always hate how the Skinomi drags on the tablet but this no drag at all. I will let you know how customer support is like after contacting them for a replacement for this one that got dimpled getting it out of the too tight plastic bag. Next time I will use a knife to cut the bag instead of trying to pull it out.
Oh and one more thing no sensitivity decrease at all that I can tell. I will try to get some pictures of it with my mothers camera to post but just to let you know it just a few mm larger than the screen so only covers the screen so great for cases.
I also tested the permanent marker on a piece of the excess plastic that I pulled it from and the marker after drying wiped right off so definitely appears to hold up to the claim of stain proof.
I guarantee you they will have issues calling it glass. You guys have no idea how dumb people are when it comes to these things.
Now I'm curious.
How was the fit on the screen? Full to the edge coverage? Custom cutouts or just a chunk cut out?
I'm interested in this. Anyone else who bought willing to share?
Ok here is the pictures I promised. BTW I was not able to attach the pictures here got a security token was missing error.. any idea why? I was only able to attach picture by uploading from a picture site like Photobucket. Anyways I think I did a pretty good job of these pictures and you will see the 3 blemishes/dimples I caused pulling the protector out of the plastic but it came out better than I thought it would for only my second wet application install.
The fit is just about 1-2 mm larger than the screen so it only covers the screen and really works well with my case. The case is quite narrow for one with a kickstand and been very happy with the $10 purchase for it.
pmoradi2002 said:
I guarantee you they will have issues calling it glass. You guys have no idea how dumb people are when it comes to these things.
Click to expand...
Click to collapse
Everyone in every retail setting will tell you customers are dumb. Letting those customers know on a forum is a bad thing for your business.
From the DBA website, it appears that this is a fairly new company; a start-up by one individual. Do we have any independent evaluation of his claims regarding his screen protector and cases?
So this only covers the screen area and not the full frontal glass?
kuratsu said:
So this only covers the screen area and not the full frontal glass?
Click to expand...
Click to collapse
Yes just like the pictures show. You can see the edges on the top down view of the phone. It's the area I was worried about and it is not rubbery or tacky like on my mothers Skinomi.
Century21J said:
:good:
I'm guessing that's what the other guy did for spectre?
this looks promising. the thing i hate about wet application is the tacky feel to it. but if this promises to be "just like glass", might be worth trying it out.
Click to expand...
Click to collapse
Yeah it's not a bad price and definitely not rubbery/tacky at all. BTW if you have any other questions on it let me know I'll answer to the best of my knowledge this was my first actual review so hope I covered all the bases in what was important to know Hope it was useful to you all.
Just Like Glass Screen Protectors
Hey all,
I'm not really new but I tend to post on other forums. I come here for the good stuff on rooting.
I'm the CEO of DBA Cases, Inc.
I did start the company, however I had several investors. After having an Original Droid, a Bionic, and a Galaxy Nexus I had a very good idea of what people liked.
Personally I hated screen protectors and was not going to sell one until we came up with this. I have it on my phone and love it. It protects against breaks as well - my photographer asked me why I went into making cases so I took the phone out of the case and it squirted out of my hand - hit the wall and then our tile floor. No damage at all to the phone but a very small micro scratch on the Just Like Glass Protector. It probably would have shattered. I've found that the most you can do is give it micro scratches - you can't feel them or see them with the screen on. That's what I got from the fall and it doesn't bother me at all.
I'd be happy to answer any questions you may have.
Scott
molitar said:
Nice idea but I can not buy any case without a kickstand I watch alot of videos on mine.
Click to expand...
Click to collapse
I completely understand. I wanted to put a kickstand on the Ultra but it would have been too bulky. Also the cost of adding a kickstand is nearly the same amount as making the mold for the case.
I have a different solution I use.
I'm planning on making my own stand but I have them wherever I may need it.
---------- Post added at 10:39 PM ---------- Previous post was at 10:30 PM ----------
While I'm taking pictures...
The Ultra and the Thin Grip
Please ignore the mess behind them.
The case does not look that much skinnier than the Amaze I am using which does have a kickstand.
Promising
Looks pretty cool. How does it keep your screen safe? doest it last well?
SSHGuru said:
How can you tell how thin the cases are from my picture
Stands must be made out of polycarbonate or abs in order to hold the case up. That means some bulk. It doesn't have to be a ton but I looked into a ton of stands and didn't decide to do it.
I wanted to - in fact I was going to make a stand of the same material they use in snap watches would would be made of TPU. Press a button and the stand comes out and can bend.
Problem is that it increases the cost of the case by at least $10,000. In fact I was talking to the CEO of another case company last week and he said it took three molds to make his stand. That's a ton of money.
Since I had a budget I decided to do without - some day.
Both of my cases could not be any thinner than they are.
Click to expand...
Click to collapse
I was looking at the depth where the camera lens is. Yes it is a thinner but I was just commenting not that much thinner considering that the Amaze is a bit thicker with the kickstand. I really am impressed how thin the Amaze is with a kickstand as most are bulky considerably with a kickstand. The sides look the same almost in width as yours but the back is probably about twice as thick as yours due to the kickstand. It may not be a very strong kickstand but strong enough for regular use as long as don't drop it with it out as it has the really skinny piece of support plastic that holds it open the other part of the kickstand is quite thick. The stand itself is about 2mm thick and the plastic support is only I would say about 1mm thick.
Now the screwdriver portion was not that impressive as there is no way to tell how much force is being used each time. But the screwdriver and rotary was quite impressive as there was no getting around how hard the screen was being hit by that key. The only thing I notice is the oil from my hands tends to smudge the screen more than the glass but for the protection I can live with that but would be nice if they found a way to eliminate some of the smudges with it. Other than that really happy with the screen and registering on the site for the replacement so I can get this one replaced without the 4 dimple spots. BTW a video installing it would be a good idea I used the shower method in bathroom for dust and lint.
molitar said:
I was looking at the depth where the camera lens is. Yes it is a thinner but I was just commenting not that much thinner considering that the Amaze is a bit thicker with the kickstand. I really am impressed how thin the Amaze is with a kickstand as most are bulky considerably with a kickstand. The sides look the same almost in width as yours but the back is probably about twice as thick as yours due to the kickstand. It may not be a very strong kickstand but strong enough for regular use as long as don't drop it with it out as it has the really skinny piece of support plastic that holds it open the other part of the kickstand is quite thick. The stand itself is about 2mm thick and the plastic support is only I would say about 1mm thick.
Now the screwdriver portion was not that impressive as there is no way to tell how much force is being used each time. But the screwdriver and rotary was quite impressive as there was no getting around how hard the screen was being hit by that key. The only thing I notice is the oil from my hands tends to smudge the screen more than the glass but for the protection I can live with that but would be nice if they found a way to eliminate some of the smudges with it. Other than that really happy with the screen and registering on the site for the replacement so I can get this one replaced without the 4 dimple spots. BTW a video installing it would be a good idea I used the shower method in bathroom for dust and lint.
Click to expand...
Click to collapse
We are going to do a video soon for installing but the instructions on the site are the newest versions. Doing it in the shower is the safest method but if I suggest it people probably will freak out about how hard it is when it's really pretty easy.
In the video that was a glass puncher. I know it's hard to tell how hard it's being pushed but it's the same force. One is done on the film which stops the force and one on the glass which does not. The key test was pretty intense and then taking the rotary to it was cool. (if people are wondering it's on the Facebook page).
Samsung with the Galaxy Nexus and the S3 have made great glass that doesn't pick up prints. The one irritation about the protector I have is that it does. Not terribly but I'm used to not worrying about it. We are working on a way to get rid of the micro scratches and the fingerprints. The problem is if we add a layer it makes it feel more plastic and ruins the visibility. It has to be a chemistry solution and I didn't take chemistry in college so I just ask them to try...
https://www.facebook.com/photo.php?v=10151389828738942
I wonder how these screen protectors compare to the ZAGG EXTREME
I have the device for some time now, I clean the screen when it dirty, and when not used, it either docked in it's dock for charge, or stored in my SENA leather pouch, is there still any need for a screen protector? I do baby my devices, I have some old SE K800, that now my mom use, and except some very little scratches, on the screen (it actually made of glass with some nice layer of anti reflect :good, it looks like new, I don't put my devices in pockets of my jeans or so, as I always go around with a backpack with all my stuff, be the smartphone in separate pocket.
I read some thread around the net, from what I understood, there a couple types of screen protectors:
dry or wet installation, and glare or anti glare, some has oleophobic layer, there even a glass protector to protect the glass to protect the glas LOL.
I do like how anti glare once, look indoors, and outdoors, but as for the quality of the display quality, it not worth it, you have an HD resolution display, even though it's a PenTile type, it still on paper has HD resolution, anti glare just make it look so bad, I don't know how the more pricey ones, work with it, but if I compare it to my 24" IPS DELL computer display, it's difference of day and night (and in negative form, DELL is much better), so yes I do hate the glare, it much easier to read from matte display, but it the manufacturer thought it need to be glare, and there no option to choose matte or glare (like you have in let say, laptops), I don't know how you guys like anti glare screen protectors.
Then there the standard screen protector we all know, the problem is, they just don't feel like the sleek cool glass, it harder to swipe, and play games with them, I know it's not Gorilla glass, but I just hate to buy a device for resale value, I like all about it, and I don't have the money to replace device every then and now, also I don't run after the newest and best devices at all, when I understood I need a NEXUS, then all I buy is NEXUS, just for the NEXUS experience, and thats basicly all I care about, not that much about the specs, as I don't have so much of a choice, because it's NEXUS.
Also, I just hate dry installation screen protectors, and the one, that we have for the device, not cover all the screen, because it curved, so I maybe consider, a wet installation protector, but then again, they from what I seed, has a weird orange peel feel, and they not feel like the glass, at all, so I just don't know, do I need or don't ? I just like to feel the device, like it is, actually I use the SENA pouch, because I use the dock to charge the device, and don't want to wear the USB port, and that the best and only choice, that feel and looks nice, and protect the device very well, also the screen. as it inside made of soft velvet material, and also, I just can't use any other type of case, as I need it be easily removed from the device, when I need a charge, if I did..the case would wear and tear very fast, and get scratched, and what not.
Thoughts?
I ran a screen protector on my old Galaxy SII and it was fine. However I tried to install a screen protector on my GNEX and because of the curved glass it just wouldnt install good enough for me. So I don't have one. I have owned the phone for almost a year now and no major scratches. I don't use a case either, a few minor dings from small drops but nothing to bad. This phone is pretty tough, at least for me.
I don't want to be paranoid it'll scratch, the thing is, that again, when it not in use, the screen get scratch protection, when in the SENA case, but I want to preserve it for at least some years, or till Google stop update it. in conclusion: anti-glare is good for direct light source, but damage the image quality; wet apply is easy to install, but feels like orange peel LOL, and looks like orange peel; so my only option is normal screen protector then, but which?
There are chapo eBay like 10 for 5$ or so, are they any good? just don't feel like wasting my money for accessory, that I may not like, and another problem, it's problematic to resell, it's not a case or bluetooth speaker..
Maybe some manufacturers has some money back program, if the customer not satisfied with they product? What is the best screen protector out there that:
1. don't cover the edges of the display
2. has oleophobic layer, just like the GNEX screen has?
3. reduce some glare, but not matte type
*If there a wet install protector, that actually feel good, and not rubbery, I also welcome it.
I have used them in the past, but the screen is so much better without them. I take the minor scratches (those you only see under a certain angle/lighting) with it. I have the phone most of the time in the pocket of my jeans. I do remove any dirt/sand from my pocket one a day.
And the oleophobic layer is good for a month ore so, it wears of quickly.
I have a Spigen SGP screen protector since I bought my GNex ad i?m totally satisfied about it.
---------- Post added at 04:26 PM ---------- Previous post was at 04:21 PM ----------
Edit.
Have just started using a extreme guard wet apply protector, but some people don't like it. It's fine with me honestly, grabbed one since it was like 5 bucks for 2 including international shipping. The oleophobic coating on the gnex wears out fast, feels good at first, then it's kind of rough when it wears out a little, one of the motivating factor I got a screen protector as well.
Beamed from my Maguro
if possible, use various films..
You may find the film you like whether it is needed or not.
Generally with a screen protector you feel more confident and convenient
i offer Buff ones.so perfect...
Had an anti-glare.....didn't like it.
My cat likes to gnaw on my phone so the screen protector now has a few scratches, unlike the screen.
Best ones I've ever used were from Bodyguardz. I had to smash my phone screen in a rock to get out of a jam and it didn't even hurt the phone. They also don't change the look of the screen at all like anti glare ones will. Only thing better would likely be the tempered glass variety.
past_pluto said:
Best ones I've ever used were from Bodyguardz. I had to smash my phone screen in a rock to get out of a jam and it didn't even hurt the phone. They also don't change the look of the screen at all like anti glare ones will. Only thing better would likely be the tempered glass variety.
Click to expand...
Click to collapse
What kind of a jam would you need to smash your phone screen to get out of???
iamsteveu2 said:
What kind of a jam would you need to smash your phone screen to get out of???
Click to expand...
Click to collapse
Taking pics too close to flood waters full of rocks and was swept into them. Had my phone in hand whole time. Even soaked the phone but worked next day after it dried. And no marks on the screen at all
Yes
Sent from my Nexus 7 using XDA Premium 4 mobile app
1 year and a half with my GNexus without screen protector, no scratches yet but I think I got luck, dropped 2 times but always on the back side
I buy this one at January of this year and for sure its best screen protector i find, The pack have 3 but i only use one and dont need to replace yet.
No marks, no texture, very good deal in my opinion.
Search on Ebay for "New 3x CLEAR Screen Protector Guard Cover Film Samsung Google Galaxy Nexus i9250" the vendor name is "rockymobile"
I
Same here.. Never used a screen protector and never had a need for one.. Even with my keys in the same pocket I've never scratched my screen.
Sent from my Galaxy Nexus using xda app-developers app
my solution is using a "smaller" size protector which is not cutting according the glass size. It avoids to fit the curved face so the protector signally smaller then the screen glass. I found this type of the protector on the shop and still using it happily. It is petty match with the soft case because the soft case will covered the curved face that protector doesn't. And you don't worry the soft case will tilt the protector up.
I vote no.
Had 1 on 6 months ago since it was included/installed when I purchased, along with a rubber case.
But after testing out another GN without it, it just felt so much smoother, so took it off, but keep the case, which helps keep a grip from slips/drops
I use protector from 1 year ago and I dont have problems using touch and everything is smooth.
Sent from my Galaxy Nexus using Tapatalk
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”)Shock Resistant
Compliant with a military standards test (MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”). Device may not perform as tested in all conditions. Test performed in controlled environment. Do not attempt.
Click to expand...
Click to collapse
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
From dbrand
Robot 077 (dbrand)
Apr 13, 15:55 EDT
Hey ######!
Thanks for reaching out. Unfortunately, we have no plans to support the LG G8 ThinQ, as there is simply not enough demand to justify adding it to our portfolio at this time. Sorry about that. Let us know if there is anything else we can help with, and have a great day!
Signed,
A Robot
Click to expand...
Click to collapse
screen protector
https://www.youtube.com/watch?v=9EDYQG6Q7JY
i found this to be a good review of the BodyGuardz Pure Arc Curved Tempered Glass Screen Protector for the G8 ThinQ
i thought it was a shill channel looking at other reviews, but he seems to hate this. it fits GREAT, but only has adhesives on the sides and has a visible dot matrix.
on top of that, he says there is an unnatural hollow feel to it due to the adhesive not being full screen. i imagine this will negatively affect the oled speaker.
this is a $50 screen protector that AT&T is giving away as a part of a promotion.
skins... not much out there and only dbrand has responded (with a NEVER).
the Invisible Phone Guard screen protector was OK and visibility was good, but i found the sound to be very slightly muffled as if it is dampening a certain high frequency.
i'm keeping the back on until i find a decent skin.
this film seems like it will blemish easily. it certainly gets dirty easily. pics here...
Having this phone for a few days now and the OP was not lying about how slippery this phone is. A case or skin is a definite must have!
Ordered a Ringke Fusion X.
Sent from my LM-G820 using Tapatalk
I ordered this case - https://www.ebay.com/itm/273759783563 - I should be getting it later today, I'll post about how well it works.
No sooner did I post this than it came in the mail. Fits on easy, stays on snugly. It's matte rubber without feeling like you're holding a car tire. I had one for my Nexus 6P I really liked and this feels equally good.
This thing is indeed incredibly slippery. I think I'm just going to be extra careful about where I put it down (it's not too slippery in my hands I find, just on certain surfaces), I hate hiding the slick design of the phone with a case. This is also the first phone I've had in a very long time where the camera doesn't bulge out the back, which I really appreciate and don't want to diminish with a case.
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
Well there are a number of skins now at the varies skin sites though I personally skipped them and simply put the phone into an Otterbox Defender case.
I used a cheap curved glass screen protector ( was like $9) and some loca glue (like $10) to make a DIY full adhesive whitestone kit.
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
stamos*bp said:
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
Click to expand...
Click to collapse
I have not had that issue and I am using a Supershieldz screen protector however my brother who is using an Iphone 7 recently had that issue with one due to a screen protector he picked up at Walmart though it resolved once he removed it.
It's amazing to watch this phone slowly creep off of my wireless charger, which has a rubbery grippy surface! My case arrives today...
I'm using slickwraps for the back of my phone and I like it. I would say they are slightly less precise than dbrand, but still great quality. If people would like photos, please let me know.
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Huge Thanks!
Weston
You may want to think about giving the Skinomi Full Body Skin a try. It definitely keeps my phone from slipping off of surfaces, giving the phone a bit of a plastic-rubber feel while still letting the beauty of the phone show through. The back protector doesn't interfere with any cases and offers a bit of mental relief for those times you want to carry your phone without a case.
Dude, I had my g8 for 2 days. Was in. The washroom and the phone was on a roll of toilet paper (the flat side, obviously haha) and got a notification. Before I knew it the phone slid off and landed on the bottom right corner, heard an alarming "tink" sound but didn't think anything of it. A few mins later I saw a small crack, then I looked again and realized that there were multiple cracks on the screen. Ended up getting it replaced by my carrier, I said it was damaged in shipping. Point is that this phone is a glass cannon: it's very powerful for specs but it will have a broken screen if you sneeze on it the wrong way. This is one of the massive downsides to the new gorilla glass. Sure it's scratch resistant but with the wrong amount of pressure it will get destroyed :/
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
I've dropped this thing so many times because it's so slippery. Seems like every other week I hear it jump off a table a few minutes after I leave the room.
I have a crack on 3 corners, but nothing across the screen. My case (which I tend to take off when connecting it to things such as controllers or some USB cables) almost hides the cracks.
However, these are more like small missing chunks of glass on the corners. I've never had such a fragile phone. I tried super glue on the corners to keep it from spreading, but eventually just went to town on the corners with silicone conformal coating that I had sitting around. It seems to be working great and keeps the little shards coated and sort of glued in there. I kind of prefer this to replacing the screen as replacements have only gone down slightly to around $150 shipped from China and I know I'll just end up breaking that one.
There's always been one or two deal breakers with all of my LG phones and that's why I kept going to a different manufacturer as soon as I could. I hate to say it but after this, I'm never going back to LG again no matter what cool unique feature they're wooing me with.
I basically used this phone with a broken screen for 5 months. Replacements are still $150 (better than $200 back when it broke). It dropped approximately 1.5ft face down onto a clay tile floor and front screen has cracks all over. It almost looks somewhat inverted now as if the screen was designed to have tension. Well I went and got a note 10+ and man it is great to have a real phone again. Doesn't have some of the edgy LG stuff that I really loved and theres no headphone jack... but bigger/brighter screen that isn't broken is so nice to have. Good luck with your screens guys.... I'll replace mine when the price is reasonable and either go back to using it or put it on ebay.
Jaa-Yoo said:
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Click to expand...
Click to collapse
I have reached the same conclusion about the screen not being flat enough to utilize a hard glass protector even if you avoid the very curved edge portions. I tried the curved, glued only on the edge types first but that always had a weird optical effect and wasn't very ruggedly glued on, none in the middle. Why? I haven't tried using whitestone glue yet.
So the suggested one sounds interesting. https://www.amazon.com/Ringke-Compa...dge-Application/dp/B07NHMBNLH#customerReviews
I think I'll watch the videos first.
I also found these but yes a firm, solid piece of glass is a no go IMHO. Not a fan of these new case designs for all the new phones. Why de do dat?
https://www.amazon.com/dp/B07QQD2BCG/ref=cm_sw_r_cp_apa_i_MkrHDb48GTKZN
https://www.amazon.com/gp/product/B07QB9MN28/
Still hoping for a solution. I had great luck with Spigen Crystal screen protector SGP10855 for my LG G3 which is hard but I believe would be flexible enough if it skipped the curved edges but they don't make anything like that?
UPDATE: After watching the LG G8 video on YouTube I decided to go with the Rinke.
I'll report back. This will be 4th type attempted.
I put it on this morning. It is pretty easy to get this on with good alignment and no bubbles.
Two things.
1. If you watch the YouTube instructions the place where the dust dust cleaning sticky backing splits in half does leave a slightly perceptable crease in the soft protector. Maybe it will smooth out with time? It did not with the squeegee.
2. It's soft so you can possibly nick with your fingernails and it's also easy to lift an edge ever so slightly during final finishing so be careful.
I see no installation flaws but it also isn't a hard glass but then those do not install properly even when undersized because the screen is not level as you get near the edges as far as 1/4" away. The film eliminates this issue but will it protect and stay on.
We shall see.
I sell a lot of these devices and it is even hard to photograph them on a smooth surface because they will start around on my table. Put it in a case, the screens are expensive.