Develop Bugs

Potential fix for SLCD Bricked Incredibles

So after what seemed to be the art of bricking my Incredible over the weekend (dead, black screen), I think we have found a fix for it.
This is what we did to bring the phone back to life:
** Please note: Make SURE you have the correct drivers installed. I used the modified Android ones.
1.) Download the Android SDK, and then fire up a command shell in the Tools directory
2.) Boot the Incredible into Recovery:
* Pull battery, then put back in
* Hold Power and Vol Down for 5 seconds
* Wait 20 seconds
* Hit Vol Down once
* Hit Power
* Wait 20 seconds
3.) Check to make sure that ADB can see it by typing adb devices into the command shell you opened earlier
4.) Type adb reboot oem-78 into the command shell. I let the phone sit for a few minutes.
5.) Run the RUU from Shipped-Roms, located here: shipped-roms.com/download.php?category=android&model=Incredible&file=RUU_Incredible_C_Froyo_VERIZON_WWE_3.21.605.1_Radio_2.15.00.07.28_2k4k_NV_1.50_PRL58006_release_143351_signed.exe
Once the RUU finished running, my phone rebooted and my screen is alive!

Downloadding now I hope this works. I already called verizon and the replacement Phone should be here Wed.

let me know if this works for you, i worked with aracheon all last night and then was able to finally break it down and get it working this afternoon, if you need help let me know

Credit to be given where credit is due - I wouldn't have figured this out without Jobehonda's help.

I would not say "bricked" inc, just screen was dead because there were no drivers installed for SLCD. My phone was "OK", when i called my own number, it rings, vibrates etc, just i was not able to see anything.
What i did was just got the stock 2.2 PB31IMG.zip from somewhere around here, and using "timing" in my mind, i just repeated flashing process as usually. The only difference was that i did not see what i was doing. For the first time it failed, but i got lucky after second time, and my phone (scree that is) is back to life.
Now, i just have to root it again using caution this time....

Windows XP doesn't like RUU_Incredible_C_Froyo_VERIZON_WWE_3.21.605.1_Radio_2.15.00.07.28_2k4k_NV_1.50_PRL58006_release_143351_signed.exe file name must rename to anything(.exe) shorter I used RUU.exe

fuzio1963 said:
I would not say "bricked" inc, just screen was dead because there were no drivers installed for SLCD. My phone was "OK", when i called my own number, it rings, vibrates etc, just i was not able to see anything.
What i did was just got the stock 2.2 PB31IMG.zip from somewhere around here, and using "timing" in my mind, i just repeated flashing process as usually. The only difference was that i did not see what i was doing. For the first time it failed, but i got lucky after second time, and my phone (scree that is) is back to life.
Now, i just have to root it again using caution this time....
Click to expand...
Click to collapse
Well, right. But the phone is effectively useless with the screen problem. The big guns are calling it an "SLCD Brick," sooo...
tjamscad said:
Windows XP doesn't like RUU_Incredible_C_Froyo_VERIZON_WWE_3.21.605.1_Radio_2.15.00.07.28_2k4k_NV_1.50_PRL58006_release_143351_signed.exe file name must rename to anything(.exe) shorter I used RUU.exe
Click to expand...
Click to collapse
Depends on where you put it. You should be able to get away with dropping that on the root of your C drive and still keep the long filename.

Fixed It works it really works, Thank you Jobehonda and arache0n

tjamscad said:
Fixed It works it really works, Thank you Jobehonda and arache0n
Click to expand...
Click to collapse
Glad to hear it.

Awesome! Glad it worked for more than just one person!

arache0n said:
Well, right. But the phone is effectively useless with the screen problem. The big guns are calling it an "SLCD Brick," sooo...
QUOTE]
What's your point here?? You said "bricking my Incredible ", soooo......?
FYI, i just rooted my Dinc with unrev....3, got black screen with two white lines, (again). Flashed recovery fix, and all is goooood, this time.
G-night all.
Click to expand...
Click to collapse

the problem aracheon had is we accidently flashed the wrong image file to upgrade back to stock recovery when trying to load the correct flash file it was not working...not sure why. Either way, both seem to fix the problem.

Jobehonda,
I'm stuck with my Black screen SLCD Dinc as well, doing the same mentioned above, and when I tried following your instructions it hasn't worked out for me so far. I can't get past the "adb devices" thing. It tells me "devices not attached" or someting to that effect after running the command. I may be doing something incorrectly... Could you be of assistance? I also posted a comment to your "Droid Incredible is a Pile" post on your site. Looking forward to you helping me bring my Droid back to life...
Thanks!

Nevermind... I fixed my "SLCD Brick"!! I will post details later of how I did it...

tjamscad said:
Downloadding now I hope this works. I already called verizon and the replacement Phone should be here Wed.
Click to expand...
Click to collapse
Well, for what it's worth your replacement phone might be an AMOLED.
A week or two ago I got a replacement for the 3G issue and recieved another AMOLED.

OK, this is, what fixed mine:
-pull battery, then put back in
-hold power + vol down for 5 seconds, nothing happened...
-then hold power down for 5 seconds, got 1 vibration...
-then hold vol up + power for 5 seconds, and to my surprise, screen turned on and only had 1 option: Hboot
-then left the screen up and took my SDcard out (the battery cover was off already) and I went to the following thread (how-to-update-your-droid-incredible-to-leaked-android-2-2); and downloaded the "PB31IMG.zip" file from step 1 and copied it over to my SDcard. Please "google" the thread title above... I'm not allowed to post full links because I'm a new user.
-then I put the SDcard back in, pull the battery, then put back in
-hold power + vol down for 5 seconds
-Boots into hboot and select Bootloader
-PB31IMG.zip will start to install.
**Note** Your phone might reboot to either hboot or recovery after trying to install PB31IMG.ZIP, just get back to hboot and install again, when you get back to hboot you should notice its version .92 and S-OFF is still on, just install PB31IMG.ZIP again and all should be good. I believe at one point after it updates hboot it has to reboot to finish the install, so this might be what you are seeing.
-Finally it will reboot and you should see HTC Screen, Droid voice/Red eye will load, and you will have a fresh new 2.2 Dinc un-rooted. You then can try re-rooting at your own risk!!
I basically used part of jobehonda's instructions, and part of the thread's instructions, combined with my own messing around with my phone to fix my "bricked SLCD" Dinc... I hope this can help others as well as it helped me! ; )
Just one more option to try... What the heck, your droid is already screwed, it can't get worse. Just try this!
BTW, a buddy of mine with a rooted Droid X, also helped me with getting this far for the last 3 days!! He helped me with searching all the droid forums out there and random sites to get answers... Thanks CLIFF!

<---- Jackass

edit
fixed.

I am glad you figured it out, basically for the device to be recognized in adb you need to make sure your definately in recovery, if you follow the steps and count, one one thousand, two one thousand, etc etc you should be able to get it into recovery and recognized by adb.
the other thing is you need to make sure you have the HTC drivers installed prior, otherwise it wont recognize.

Then I shall edit it.

[Q] HTC EVO SHUTS OFF AND LIGHT BLINKs

hey guys i am having an issue with my gf new evo i bought from craigslist and i am hoping its something software based so i can fix it....so here is the details....
My gf recently lost her evo and no insurance so i went on to craigslist to buy one so when i get the phone it looks nice...legit you know....so anyways i get home and get to craking....so when i started first thing i did was opened the recovery and to my suprise the evo S-off and i was like wahhhttt....anyways so i proceded to rooting it with UnrEVOked and did everthing great so i decided to flash the old rom she had on her old phone cause she liked it so i did and short story long got her phone back to normal...until recently the phonw will randomly reboot when were using it with phone calls or NAV or just music or to many things at once and full battery and will reboot try to turn on then ....IT VIBRATES 4...5 times and shuts off and the LED blinks green every second.....the only way i could turn it on is taking the batter off for a few minutes then reinserting batter and BOOM back on like nothing happend....so i need so help please....did a full wipe of everything and reinstalled rom and nothing....OHHH and it came with stock batter and two non stock!!... PLEASE HELP SHES NAGGING TO MUCH LOL

I don't know for sure but I've read that changing your kernel might fix it
Sent from my PC36100 using XDA App

KaL-EL3038 said:
hey guys i am having an issue with my gf new evo i bought from craigslist and i am hoping its something software based so i can fix it....so here is the details....
My gf recently lost her evo and no insurance so i went on to craigslist to buy one so when i get the phone it looks nice...legit you know....so anyways i get home and get to craking....so when i started first thing i did was opened the recovery and to my suprise the evo S-off and i was like wahhhttt....anyways so i proceded to rooting it with UnrEVOked and did everthing great so i decided to flash the old rom she had on her old phone cause she liked it so i did and short story long got her phone back to normal...until recently the phonw will randomly reboot when were using it with phone calls or NAV or just music or to many things at once and full battery and will reboot try to turn on then ....IT VIBRATES 4...5 times and shuts off and the LED blinks green every second.....the only way i could turn it on is taking the batter off for a few minutes then reinserting batter and BOOM back on like nothing happend....so i need so help please....did a full wipe of everything and reinstalled rom and nothing....OHHH and it came with stock batter and two non stock!!... PLEASE HELP SHES NAGGING TO MUCH LOL
Click to expand...
Click to collapse
Hmm. Any time I ever see anyone reporting what you're describing, I've never seen a solution. What I would try though, is to unroot it, by turning S back to On, and then running an RUU. See if it will run stable while on a stock ROM. If so, try rooting again. If it is still doing the same thing after running RUU, with S on, I would take it Sprint. The phone is still under warranty, and if it turns out to be hardware related, you should be able to have Sprint do something for you.
RUU: http://forum.xda-developers.com/showthread.php?t=884060&highlight=hboot-0.97+ruu
I also attatched the Unrevoked S on tool. Flash the Unrevoked S on tool in recovery. Confirm that S is on. (what bootloader are you on? If its the Eng .76 bootloader, you don't need the S on tool, in which case you'd just run the RUU). Once S is on, run the RUU, to flash you back to stock. You want to run the RUU that matches your bootloader version, software version, and radio versions the closest. That will take you back to stock, and then you can see how the phone performs.
And it kind of sounds like the phone may have had some issues before. It was obviously rooted, since it was already S off when you purchased it. Who knows what type of issues it had prior to you obtaining it..

Thanks so much!!!
k2buckley said:
Hmm. Any time I ever see anyone reporting what you're describing, I've never seen a solution. What I would try though, is to unroot it, by turning S back to On, and then running an RUU. See if it will run stable while on a stock ROM. If so, try rooting again. If it is still doing the same thing after running RUU, with S on, I would take it Sprint. The phone is still under warranty, and if it turns out to be hardware related, you should be able to have Sprint do something for you.
RUU: http://forum.xda-developers.com/showthread.php?t=884060&highlight=hboot-0.97+ruu
I also attatched the Unrevoked S on tool. Flash the Unrevoked S on tool in recovery. Confirm that S is on. (what bootloader are you on? If its the Eng .76 bootloader, you don't need the S on tool, in which case you'd just run the RUU). Once S is on, run the RUU, to flash you back to stock. You want to run the RUU that matches your bootloader version, software version, and radio versions the closest. That will take you back to stock, and then you can see how the phone performs.
And it kind of sounds like the phone may have had some issues before. It was obviously rooted, since it was already S off when you purchased it. Who knows what type of issues it had prior to you obtaining it..
Click to expand...
Click to collapse
Mohawka said:
I don't know for sure but I've read that changing your kernel might fix it
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
ok well thanks so much for your guys help...i take it there has been many reports before regarding this i was thinking it was the BATTERYS and my second gues was the kernel lol hahah so ill try the kernel first if you think that will help k2buckley and then ill will go all out i am not sure which booatloader i have cause i am using wifi tether to write this but as soon as i found out ill report back and again thanks so much

KaL-EL3038 said:
ok well thanks so much for your guys help...i take it there has been many reports before regarding this i was thinking it was the BATTERYS and my second gues was the kernel lol hahah so ill try the kernel first if you think that will help k2buckley and then ill will go all out i am not sure which booatloader i have cause i am using wifi tether to write this but as soon as i found out ill report back and again thanks so much
Click to expand...
Click to collapse
I don't suspect that changing the kernel will have any affect on your situation. Sometimes a kernel can cause the phone to reboot, but your phone isn't just rebooting. I believe that the 5 vibrates, followed by a black screen and a blinking led, means that the phone is pushing itself into diagnositc mode, for whatever reason. I am not sure what causes this. The only way to get out is to pull the battery out, and i believe you need to eithe be sure you're usb cable is unplugged (or is it be sure that it's plugged in..... I don't recall) Then reboot. Sorry I don't remember the exact specifics, as I've never had to do it, but I've seen it mentioned around here. If you search xHausx's posts, I know he has given instructions on how to attempt recovering from that situation a few times, but I don't usually see it successful, and people end up attempting to run an RUU, if you can keep the phone on long enough. If you do resort to running the RUU, I'd try running it from fastboot mode, which you select from the bootloader.

thanks again
k2buckley said:
I don't suspect that changing the kernel will have any affect on your situation. Sometimes a kernel can cause the phone to reboot, but your phone isn't just rebooting. I believe that the 5 vibrates, followed by a black screen and a blinking led, means that the phone is pushing itself into diagnositc mode, for whatever reason. I am not sure what causes this. The only way to get out is to pull the battery out, and i believe you need to eithe be sure you're usb cable is unplugged (or is it be sure that it's plugged in..... I don't recall) Then reboot. Sorry I don't remember the exact specifics, as I've never had to do it, but I've seen it mentioned around here. If you search xHausx's posts, I know he has given instructions on how to attempt recovering from that situation a few times, but I don't usually see it successful, and people end up attempting to run an RUU, if you can keep the phone on long enough. If you do resort to running the RUU, I'd try running it from fastboot mode, which you select from the bootloader.
Click to expand...
Click to collapse
thanks alot man i gladly appreciate it i see there is other threads going on about this some all which are somewhat the same and some that are exactly the same i am experiencing....so i will take the RUU as my last step if that does not work what else can i do....insurance claim right??? oh and i am having dificulty on choosing the right pcimg or ruu ive never had to do this before so i dont know which one to chosse out of all the ones in the thread you posted?

KaL-EL3038 said:
thanks alot man i gladly appreciate it i see there is other threads going on about this some all which are somewhat the same and some that are exactly the same i am experiencing....so i will take the RUU as my last step if that does not work what else can i do....insurance claim right??? oh and i am having dificulty on choosing the right pcimg or ruu ive never had to do this before so i dont know which one to chosse out of all the ones in the thread you posted?
Click to expand...
Click to collapse
You said you can still get to the OS for a limited amount of time right? See if you can get to menu>settings>about phone>software information. Get all the info there, (PRI, Baseband/radio, Software version (3.70? 3.30?, etc) Just record everything on that page down. Then boot to your bootloader. What's the hboot version? (2.02, 2.10, .97, .93, .76, etc etc.) Report back with that info. Most likely though, you'll need to run the most recent one (first on the page in that thread I sent you, which is 3.70 software)

k2buckley said:
You said you can still get to the OS for a limited amount of time right? See if you can get to menu>settings>about phone>software information. Get all the info there, (PRI, Baseband/radio, Software version (3.70? 3.30?, etc) Just record everything on that page down. Then boot to your bootloader. What's the hboot version? (2.02, 2.10, .97, .93, .76, etc etc.) Report back with that info. Most likely though, you'll need to run the most recent one (first on the page in that thread I sent you, which is 3.70 software)
Click to expand...
Click to collapse
yeah u see i am able to keep the phone one for a while....like example yesterday i was using it to tether to my PS3 no problem but when i open like a new app or sometimes even a phone call it reboots at first i thought it was like the batteries were over heating but now that ive seen this happen to other people i see that not the case...so back to the point here is the info
Baseband-2.15.00.11.19
kernel-2.6.32.17 -gee557fd/[email protected]#15
build- Myns TwoPointTwo rls5
Software Version-3.70.651.1
Webkit-3.1
PRI version-1.90_003
PRL version-60677
Hardware version-0003
HBOOT-0.93.0000
Radio-2.15.00.11.19
and there you go that all i need to get right?

KaL-EL3038 said:
yeah u see i am able to keep the phone one for a while....like example yesterday i was using it to tether to my PS3 no problem but when i open like a new app or sometimes even a phone call it reboots at first i thought it was like the batteries were over heating but now that ive seen this happen to other people i see that not the case...so back to the point here is the info
Baseband-2.15.00.11.19
kernel-2.6.32.17 -gee557fd/[email protected]-2#15
build- Myns TwoPointTwo rls5
Software Version-3.70.651.1
Webkit-3.1
PRI version-1.90_003
PRL version-60677
Hardware version-0003
HBOOT-0.93.0000
Radio-2.15.00.11.19
and there you go that all i need to get right?
Click to expand...
Click to collapse
Yup. That's all. Your software and radios are the latest, but your hboot isn't. I would try the newest 3.70 RUU first. If that gives you any trouble, try the 3.30 RUU, or even 3.29. Its just because your hboot is older that I'm not a hundred percent sure.
Sent from my PC36100 using XDA App

k2buckley said:
Yup. That's all. Your software and radios are the latest, but your hboot isn't. I would try the newest 3.70 RUU first. If that gives you any trouble, try the 3.30 RUU, or even 3.29. Its just because your hboot is older that I'm not a hundred percent sure.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
so do i just download the RUU and not the pcimg??? or both??

KaL-EL3038 said:
so do i just download the RUU and not the pcimg??? or both??
Click to expand...
Click to collapse
Either one you want. They are two separate methods of running the RUU. If you download the actual RUU, it's a .exe that runs from your computer, while the phone is plugged in Via USB. You need HTC Sync installed to run the RUU.
PC36IMG, is a file that you put on your sd card, and then boot to your bootloader. If the PC36IMG is on the main directory of your sd card, and it's named exactly PC36IMG, then when you boot to the bootloader, it will prompt you to update after a few seconds. Just wait for it to ask, then select volume up to say yes. That will then run the 'ruu' from your phone. Either method will acheive the exact same results. Personally, I think it's easier to use the PC36IMG, but they are both easy to do.

k2buckley said:
Either one you want. They are two separate methods of running the RUU. If you download the actual RUU, it's a .exe that runs from your computer, while the phone is plugged in Via USB. You need HTC Sync installed to run the RUU.
PC36IMG, is a file that you put on your sd card, and then boot to your bootloader. If the PC36IMG is on the main directory of your sd card, and it's named exactly PC36IMG, then when you boot to the bootloader, it was prompt you to update after a few seconds. Just wait for it to ask, then select volume up to say yes. That will then run the 'ruu' from your phone. Either method will acheive the exact same results. Personally, I think it's easier to use the PC36IMG, but they are both easy to do.
Click to expand...
Click to collapse
yeah i think i will personally use the pc36img cause i dont want to mess with HTC sync i heard its a pain in the butt!! lol and thanks man i will report back to see what happends ok!

KaL-EL3038 said:
yeah i think i will personally use the pc36img cause i dont want to mess with HTC sync i heard its a pain in the butt!! lol and thanks man i will report back to see what happends ok!
Click to expand...
Click to collapse
cool, sounds good. And just don't forget to turn it back to S on, by flashing the unrevoked s on tool, before you run the RUU(or PC36IMG). Good luck with it!

k2buckley said:
cool, sounds good. And just don't forget to turn it back to S on, by flashing the unrevoked s on tool, before you run the RUU(or PC36IMG). Good luck with it!
Click to expand...
Click to collapse
ohhhh snap thanks man luckly i came back and read this also am i suppose to unzip the pcimg on to the root of my sdcard?

KaL-EL3038 said:
ohhhh snap thanks man luckly i came back and read this also am i suppose to unzip the pcimg on to the root of my sdcard?
Click to expand...
Click to collapse
No, just leave it as is, unzipped. Boot into the bootloader, let it scan, then apply the update and reboot, you'll be all set.

KaL-EL3038 said:
ohhhh snap thanks man luckly i came back and read this also am i suppose to unzip the pcimg on to the root of my sdcard?
Click to expand...
Click to collapse
And just to be more clear, you only need to run the Unrevoked S on tool if you have any point used Unrevoked-Forever. If you are on the .76 Eng Bootloader, you don't need to run it, in which case you'd just skip right to running the RUU.
Edit: And as teh roxx said, leave the PC36IMG zipped, and on the main directory of your sd card. Named exactly PC36IMG.

k2buckley said:
And just to be more clear, you only need to run the Unrevoked S on tool if you have any point used Unrevoked-Forever. If you are on the .76 Eng Bootloader, you don't need to run it, in which case you'd just skip right to running the RUU.
Edit: And as teh roxx said, leave the PC36IMG zipped, and on the main directory of your sd card. Named exactly PC36IMG.
Click to expand...
Click to collapse
thanks so much guys i will report back to see if this help ok and i have bootloader .96 so i think i have to run S-On tool..

Aye aye cappy, someone should be around.

Darn itttt
teh roxxorz said:
Aye aye cappy, someone should be around.
Click to expand...
Click to collapse
HUUHHHH ????? lol
KaL-EL3038 said:
thanks so much guys i will report back to see if this help ok and i have bootloader .96 so i think i have to run S-On tool..
Click to expand...
Click to collapse
On another note....Here are my results guys...
well ok first thing i did was format my sd card so i wouldnt run into any problems with that....then i continued to placing the zip file of S-ON tool on to the root of the sdcard Flashed it with clockwork and after it did its handy work i rebooted on to Bootloader and confirmed S-On.....so then i place the PC136img on the root of my sd card and it scanned it and i fallowed what told of me to do....so as soon it was done it asked me to reboot!!so as i clicked up to say yes it rebooted...now here is there the fun begins...when i first rebooted it went into a boot loop of turning on to HTC EVO screen then turning off And HTC EVO screen over and over again so it was turning on and off by itself....so i decided to reflash PC136 IMG all over again cause i thought something went wrong....so it completed everything again i rebooted and this time it did an HTC EVO Screen on and off thing again .....but this time i decided to take out the battery leave it out for a little and put it back on.....and as i was putting it back on i turned it on and this screen with a phone laying down with arrows going in a circle kind of like a recycle came on and stayed on so i took of the battery...and reflashed PC136 IMG again....so then i rebooted again and The darn HTC EVO screen on and off again.....so this time i took out battery again and waited for like five minutes...put it back on and the PHONE LAYING DOWN WITH ARROWS AGAIN CAME ON and i let it sit for a while and phone came on....so i was like YEAHHHHH worked welll after fully charging phone and trying to Repeat the same process i would do to get the PHONE OFF WITH ORANGE LIGHTS FLASHING....well that did not happen.....butttttttt HERE is the new thing it does the same process i would do to make that happen i do it again .....and to my suprise phone still turns off but this time its not PHONE ORANGE LIGHTS.....ITS HTC EVO SCREEN BOOT LOOP.....so now what guys.....

KaL-EL3038 said:
HUUHHHH ????? lol
On another note....Here are my results guys...
well ok first thing i did was format my sd card so i wouldnt run into any problems with that....then i continued to placing the zip file of S-ON tool on to the root of the sdcard Flashed it with clockwork and after it did its handy work i rebooted on to Bootloader and confirmed S-On.....so then i place the PC136img on the root of my sd card and it scanned it and i fallowed what told of me to do....so as soon it was done it asked me to reboot!!so as i clicked up to say yes it rebooted...now here is there the fun begins...when i first rebooted it went into a boot loop of turning on to HTC EVO screen then turning off And HTC EVO screen over and over again so it was turning on and off by itself....so i decided to reflash PC136 IMG all over again cause i thought something went wrong....so it completed everything again i rebooted and this time it did an HTC EVO Screen on and off thing again .....but this time i decided to take out the battery leave it out for a little and put it back on.....and as i was putting it back on i turned it on and this screen with a phone laying down with arrows going in a circle kind of like a recycle came on and stayed on so i took of the battery...and reflashed PC136 IMG again....so then i rebooted again and The darn HTC EVO screen on and off again.....so this time i took out battery again and waited for like five minutes...put it back on and the PHONE LAYING DOWN WITH ARROWS AGAIN CAME ON and i let it sit for a while and phone came on....so i was like YEAHHHHH worked welll after fully charging phone and trying to Repeat the same process i would do to get the PHONE OFF WITH ORANGE LIGHTS FLASHING....well that did not happen.....butttttttt HERE is the new thing it does the same process i would do to make that happen i do it again .....and to my suprise phone still turns off but this time its not PHONE ORANGE LIGHTS.....ITS HTC EVO SCREEN BOOT LOOP.....so now what guys.....
Click to expand...
Click to collapse
When the phone coming on with the arrows comes on, you need to let that finish. That's a part of the process of running the ruu/PC36IMG. When it comes to that screen, let it sit there for a bit (could be a few minutes), and don't pull the battery unless you're positive that it's stuck there.
Also, which RUU are you trying? I forget which one you went with. Perhaps try a different one as well. You may be having trouble due to the wrong RUU. Did you try downloading a different one yet?
Also, remember that there was something wrong with you're phone to begin with. It is entirely possible that there is some sort of hardware problem with it, since it was giving you the black screen with the blinking led before. The important thing here is that you got S on. That way you can at least take it in to Sprint, and not have to worry. Just be sure that if you take it in, to take your SD card out before taking it in, so they don't see any root related stuff on the card.

Flashed wrong HTC stock ROM...I have SLCD screen, need help.

I tried to go back to unroot and stock HTC rom, Flashed wrong ROM, downloaded BOTH, now, phone vibrates one time (like its supposed to), but the screen does not work. Charge light does not work as far as I can tell so far.
Is there any way to get this back working or is it pretty much gone?
Edit: Charge light comes on..

Can you get into recovery through Hboot? Power it on while holding down the volume down button and see if Hboot loads.
Sent from my ADR6300 using XDA App

frostincredible said:
Can you get into recovery through Hboot? Power it on while holding down the volume down button and see if Hboot loads.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Nope, I downloaded two recovery images. One for SLCD sreen and one for the other screen. I looked, and apparently flashed the wrong one. I get just a black screen.

So, you can't get to recovery, not even Hboot? If Hboot is black, I don't know if there is much you can do...

frostincredible said:
So, you can't get to recovery, not even Hboot? If Hboot is black, I don't know if there is much you can do...
Click to expand...
Click to collapse
If I cant get HBoot to open..or anything for that matter, will verizon be able too? I took it to the store, told the guy very simply "the screen wont show up and nothing happens besides the single vibrate (as usual) on start-up). They hooked it to something...had the phone for about 20 minutes. Then came back and told me they ordered another one...
Edit: Once the recovery image flashed, Hboot came back up initially. S-ON was displayed. S-ON was the one thing I am glad happened.! lol

LOL, I hear you, I had a similar issue with my PSP a few years back. was getting random memory errors, and crash to reboot. I had enough sense to flash it back to stock fw, before bringing it back in. it crashed around 78% thru the stock fw flash. So that was kinda a godsend, since the only data they will be able to get off of it if they try, is stock.

Well your issue was the image you flashed. You went to unroot and flash a stock 2.1 ROM. Although this sounds correct, there is a problem. The stock 2.1 ROM was made for the release DInc's, and those, my friend, come AMOLED. So by flashing that stock 2.1 ROM, it does not contain the correct hardware drivers to support the newer batch of DInc, the SLCD.
What you could have done was:
Download the correct ROM that supports the SLCD from here (which can be found on http://dougpiston.com
Place that file in the root of your sdcard.
Now since your phone's display doesnt work, like you said it vibrates once, like normal, your phone still functions properly.
Boot your phone into HBOOT and allow it a few minutes, like normal to find this PB31IMG.zip file. It then will prompt you to press UP to confirm the update or press DOWN to not update. (you will not see this, but if you have flashed a radio then you know this process)
when you press up, it will then start updating to the stock ROM. however, you wont see any of this. just a black screen.
allow that to run, usually for 10 minutes. to be safe wait 15-18 minutes and then press UP. When the update is complete you are asked to reboot. UP for yes DOWN for no. again you will not see this. Then when it reboots....you will be happy and see the HTC Incredible white screen
It got me too, same thing you did. Just dug around and figured it out.

JWhetstone02 said:
Well your issue was the image you flashed. You went to unroot and flash a stock 2.1 ROM. Although this sounds correct, there is a problem. The stock 2.1 ROM was made for the release DInc's, and those, my friend, come AMOLED. So by flashing that stock 2.1 ROM, it does not contain the correct hardware drivers to support the newer batch of DInc, the SLCD.
What you could have done was:
Download the correct ROM that supports the SLCD from here (which can be found on http://dougpiston.com
Place that file in the root of your sdcard.
Now since your phone's display doesnt work, like you said it vibrates once, like normal, your phone still functions properly.
Boot your phone into HBOOT and allow it a few minutes, like normal to find this PB31IMG.zip file. It then will prompt you to press UP to confirm the update or press DOWN to not update. (you will not see this, but if you have flashed a radio then you know this process)
when you press up, it will then start updating to the stock ROM. however, you wont see any of this. just a black screen.
allow that to run, usually for 10 minutes. to be safe wait 15-18 minutes and then press UP. When the update is complete you are asked to reboot. UP for yes DOWN for no. again you will not see this. Then when it reboots....you will be happy and see the HTC Incredible white screen
It got me too, same thing you did. Just dug around and figured it out.
Click to expand...
Click to collapse
Thanks for posting this. I would push thanks but I'm on my phone. All to often people run into this exact situation and don't realize there phone is still working normal. They just don't know it because of the black screen. For future reference those are great instructions.
DINC|CM7|PROUD AMERICAN!

Alternative solution:
http://forum.xda-developers.com/showthread.php?p=14144155#post14144155

[Q] OMG! Accidentally Formatted system data!

Alright. For starters, xda has been VERY VERY helpful to me over the past few months and I thank everyone who has ever contributed to a question or a discussion I have read. That being said, this is my first post. I watched the newb video, read many forums (both xda and others), google searched, read some more threads, kept reading threads, tried some methods described in some threads, bookmarked some interesting threads for if my phone ever works again, and read some more threads.
I am not saying the answer is not already out there, I am saying I have reached my resourcefulness cap.
Anyway, to the root of the problem: I'm not entirely new to rooting, and am comfortable using recovery and hboot to flash roms. I also had a nandroid backup! for SOME SILLY reason, while in my clockworkmod recovery this morning (maybe slightly due to being half asleep which is why I now recommend being fully awake before entering hboot or recovery or rom manager....etc) I formatted the system on my phone. I THINK.
My phone will now load up to display the bootloader, and go into recovery mode, and flash roms, but when I flash a rom, nothing changes. If I boot my phone up, it will show a notification bar at the top like usual, a stock wallpaper, and that is IT! it will show a message notification and missed call icon since I have them, but the touch screen will not work. The rosie buttons at the bottom do not show up (i.e. phone button or all aps button) no apps appear, no clocks except for in the notification bar... hardkeys have no effect (home button search button menu or back) and volume keys will not work. The lock button will only lock and unlock the screen, not power off or reboot or anything. If plugged in at this point, it is charger only.
So, I can take the micro sd card out and put files on it from my PC via a microsd-usb converter thing...
I have tried putting new roms on the sd and flashing them from recovery, no effect. Tried the RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe program, it always says that my phone has below 30% battery and will not continue (this is not the case as I have two batteries both have been fully charged because the phone will still charge them...)
And I have tried putting PC36IMG.zip files on my sd card to no avail.
I am thinking that the system was wiped because it seems like there is no boot image on the phones internal memory itself. I am currently looking for a way to place a boot image on the sd card to possibly flash it or some sort of update.zip so that my bootloader will ask me to update upon reading it.
Sorry for the long post, and ask any questions I will answer as best I can.
I am posting preemptively to the boot image adventure so that if it does not work, maybe I can have some help finding a solution by then.
I was going to take my evo to the sprint store since it is under warranty but if they go into recovery they will see clockworkmod recovery.
Thanks to all for any form of guidance!
I did just notice in my Bootloader menu (HBOOT-2.10.0001) that it says Supersonice evt2-3 **** S-ON
I don't know how because I thought it was a requirement that it says S-OFF to be rooted and flash roms, but I have definitely flashed roms before and gained su access to applications and such. BUT since it says S-ON would it then be covered by the warranty if it is not rooted?
Thanks again.

I you want to flash a boot image, you can take the boot.img from an RUU for the firmware you are, place it in your adb tools folder, then flash it using the commands:
fastboot flash boot boot.img
fastboot reboot

I'm not sure how to identify what firmware I am. Unless your talking about the Hboot version? and also, I can't place anything in any folder except onto my sd card. I have no access other than that to the phone. On the sd card there are no files except for what I put on there.
...aaand not to mention I don't know what adb is exactly...

Does your phone still go to clockwork when you go to recovery?

Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!

Timeconsumer10 said:
Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!
Click to expand...
Click to collapse
Welcome, but yes, you do need to have had usb debugging enabled, so we'll see how that goes.

SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.

Timeconsumer10 said:
SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.
Click to expand...
Click to collapse
Lol, it'd take you 200,000 days since you can only thank 5 times a day Though glad you're rooted now.

shortydoggg said:
Does your phone still go to clockwork when you go to recovery?
Click to expand...
Click to collapse
Yes it still goes to clockwork because its rooted.. now my screen legitimately does not work in certain areas of the screen (not responding to touch) so I'm going to try and get it stock stock stock unrooted and go for warranty replacement. Any ideas please let me know. Currently trying RUU Supersonic...

So, I got an ERROR [110] message from the RUU package its a file open error... :/ now i dont know what is up. Says I need a complete RUU package. Looking for another one or another option now.
If i boot phone normally now it just goes to a black screen with "htc" in the middle and "!" in a triangle in all four corners. Can't do anything from that screen.
If I boot into bootloader once where it says SHIP S-OFF at the top and instead of recovery and all those options it just says RUU but you cant do anything there... :/ I now, however cannot even get to the bootloader screen.
Could they tell it is rooted?
Maybe I could say I finally decided to do sprints OTA update that I've been denying for a while and this is the result.
Anyone agree disagree?

COCLUSION!
So. Since it has just the HTC logo and four error icons one in each corner... I took it into a sprint repair store. It would not boot into bootloader as a hard reset, so the guys at the store were stumped. They had actually never seen this before =). They asked me if I rooted it and all so I just played dumb. I told em I didn't know what that really was. They kinna explained it and I told em I didn't even have a computer (not a lie actually I sold mine and now use my dads or gfs lol). The logo on the screen was an oooold htc logo from like hero or so. So they just put it in the system as a wont even turn on type of thing and gave me a new phone since I was under warranty =) gonna see if I can live without root juuust for a little bit because work and school are gonna keep me busy for a while. I am certain to return though!
Can't wait to see what the devs can do by then!
Thanks to all for the help!

Need help repairing frozen HTC Incredible

I need help repairing my dinc. First, let me apologize for the long post, but I wanted to provide as much detail as possible.
My cousin dropped his phone in water and tried to dry it off. I don't know if he tried to turn it on after drying it off. Also, I don't know what attempts he has made to bring the phone back to life, but he has given up and handed the phone over to me. He figured since I am an IT guy and also do hardware repairs I would figure it out.
This is new to me because I've never owned a Smartphone before. He turned off his service on the dinc and used another Verizon phone he had lying around.
I've research different forums for a fix for the past few days, but nothing has worked. I’ve seen posts with similar symptoms, but in all cases they were able to get more functionality from their phone than mine. Also, my issue is related to water and not from a bad ROM upgrade. Here's a summary of things I've already tried:
Dried the phone out with the rice in Ziploc bag trick for 3 days (phone is completely dried)
Reformatted the micro sd card to fat32
Did a system update
Placed PB31IMG.zip into the root of the sd card
md5 checksum: 31bb1611a0fa8197d447c0438426717e​
When I remove or rename the PB31IMG.zip file and hold the down button+power, here is the outcome for the following:
Fastboot: Gives me the following options Bootloader, Reboot, Reboot Bootloader, & Power Dwn
Bootloader takes me back to the main HBoot screen.
Reboot would get me stuck on a continuous loop (stuck on the "HTC Incredible" white screen) and freeze
Reboot Bootloader just takes me back to the Fastboot menu
Power Dwn would do the same thing as the Reboot​
Recovery: does the same thing as Reboot; it would freeze at the white "HTC Incredible" screen
Clear Storage: does the same thing as above
Factory Reset: does the same thing as above
Each time it gets stuck at the white HTC Incredible boot up screen, I would have to pull the battery. Hitting/holding the power button doesn't seem to do anything.
From what I've been reading, I don't think the phone is bricked, since it still turns on, has limited functions, & I can get to the HBoot screen. The only thing I haven’t tried is reinstalling the OS (not sure if the OS is included in the PB31IMG.zip file)? Also, I was going to try to reformat the hard drive (just in case the partition is damaged).
The phone has never been rooted and I am not trying to root/unroot the phone... just trying to repair the phone. The phone has the S-ON.
I have uploaded a 10 min. YouTube video so you can see what I'm dealing with. Any help would be much appreciated. If there is anything you want me to try or anything you want to know that I may have left out, please don't hesitate to ask. At this point, I'm willing to try anything.
www(dot)youtube(dot)com/watch?v=gHXDJl6G2X4
Sorry, I can't post a link to my video so just replace the (dot) with a "."

You need to do an ruu with a PB31IMG.zip.
You can get the ruu here http://pvillecomp.com/?page_id=22
If you ever want to be able to root you need to use the froyo one as gingerbread cant be rooted if your s-on. Just download, rename exactly PB31IMG.zip, place on your sdcard in no folders, make sure its not connected to a computer, then pull battery and replace then boot into hboot (vol down + power) it should automaticly find the file after a couple secs and then prompt you to press vol up to install. Once its done you will be promptet to reboot , do so and if all is as expected you should boot up normally. Note that the first boot will take a long time so be patient, it may seem like it freezes at the boot animation but give it time.

cmlusco said:
You need to do an ruu with a PB31IMG.zip.
You can get the ruu here pvillecomp(dot)com/?page_id=22
If you ever want to be able to root you need to use the froyo one as gingerbread cant be rooted if your s-on. Just download, rename exactly PB31IMG.zip, place on your sdcard in no folders, make sure its not connected to a computer, then pull battery and replace then boot into hboot (vol down + power) it should automaticly find the file after a couple secs and then prompt you to press vol up to install. Once its done you will be promptet to reboot , do so and if all is as expected you should boot up normally. Note that the first boot will take a long time so be patient, it may seem like it freezes at the boot animation but give it time.
Click to expand...
Click to collapse
I ran the RUU program, which took about 10 min to complete. When it finished the update process, it rebooted the dinc, but I'm now stuck on the white htc incredible screen as demonstrated in my video. How long I'm I suppose to wait as this white screen? It seems as if it's frozen, but I'm not sure. Am I missing something?
Should I rerun it or try to run the PB31IMG.zip file? BTW, I grabbed the PB31IMG.zip file from the same site from your link.

HiJacK69 said:
I ran the RUU program, which took about 10 min to complete. When it finished the update process, it rebooted the dinc, but I'm now stuck on the white htc incredible screen as demonstrated in my video. How long I'm I suppose to wait as this white screen? It seems as if it's frozen, but I'm not sure. Am I missing something?
Should I rerun it or try to run the PB31IMG.zip file? BTW, I grabbed the PB31IMG.zip file from the same site from your link.
Click to expand...
Click to collapse
Have you done a logcat?

HiJacK69 said:
I ran the RUU program, which took about 10 min to complete. When it finished the update process, it rebooted the dinc, but I'm now stuck on the white htc incredible screen as demonstrated in my video. How long I'm I suppose to wait as this white screen? It seems as if it's frozen, but I'm not sure. Am I missing something?
Should I rerun it or try to run the PB31IMG.zip file? BTW, I grabbed the PB31IMG.zip file from the same site from your link.
Click to expand...
Click to collapse
So your saying you did the ruu exe with your pc and it compleeded sucessfully?

dmeadows013 said:
Have you done a logcat?
Click to expand...
Click to collapse
No, I haven't. Can you please explain what this is and how it's done? I'm assuming this will pull up the syslog on the phone?

cmlusco said:
So your saying you did the ruu exe with your pc and it compleeded sucessfully?
Click to expand...
Click to collapse
Yes, but let me explain. When I first turned on my phone it would freeze at the white htc incredible screen. The pc would not recognize the device. The HTC Sync program would also not recognize the device.
I pulled the battery and did pushed the down button+power to get the HBoot. Then I would plug in the usb cable and the device is still not recognized. I would have to select the fastboot option, then bootloader a few times before the ruu program can detect my phone. HTC Sync would still not detect my phone.
After the phone is recognized by ruu I ran the program. I can see a black screen on my phone with big white HTC letters. Then I would see a green scan bar running. The ruu program completed and the phone rebooted. I hit the "finished" button on the ruu program and exit.
The phone rebooted and got stuck on the white htc incredible screen. I waited for 15 mins and it's still stuck on the same screen. If you watch my video, you can see exactly what I'm talking about. I've tried re-running the PB31IMG.zip file, but it's not working.
Any other ideas? You think the partition is damaged or the phone is bricked?

Ok I watched the video. My only other sugestion would be to try and root it with unrevoked so you can get the custom recovery, wipe everything from in recovery, and then try flashing a custom rom such as jermains rooted gingerbread+ rom. If that dosent work i would say there is some type of hardware failure.

cmlusco said:
Ok I watched the video. My only other sugestion would be to try and root it with unrevoked so you can get the custom recovery, wipe everything from in recovery, and then try flashing a custom rom such as jermains rooted gingerbread+ rom. If that dosent work i would say there is some type of hardware failure.
Click to expand...
Click to collapse
When I root it with Unrevoked, can I use the online method where I log on to their site or does matter?
Can I still root the phone even though HTC Sync does not recognize my phone? Yeah, someone from another forum suggested it might be a hardware issue from the water. If my cousin turned the phone on while it was still wet, he could have shorted out some circuits on the motherboard. I told him what he should do if it ever happened to him next time.
Thanks for helping me out!

HiJacK69 said:
When I root it with Unrevoked, can I use the online method where I log on to their site or does matter?
Can I still root the phone even though HTC Sync does not recognize my phone? Yeah, someone from another forum suggested it might be a hardware issue from the water. If my cousin turned the phone on while it was still wet, he could have shorted out some circuits on the motherboard. I told him what he should do if it ever happened to him next time.
Thanks for helping me out!
Click to expand...
Click to collapse
I wasnt aware there was an online method. I'm not sure if unrevoked will work or not but i know you have to uninstall htc sync before you use the downloadable method. Its a pretty simple process and worth a shot. Hardware failure is verry possible though, especially if it was turned on wile still wet. Even if it wasnt turned on wet it probably got droped in the water wile on possibly causing a short right away.

cmlusco said:
I wasnt aware there was an online method. I'm not sure if unrevoked will work or not but i know you have to uninstall htc sync before you use the downloadable method. Its a pretty simple process and worth a shot. Hardware failure is verry possible though, especially if it was turned on wile still wet. Even if it wasnt turned on wet it probably got droped in the water wile on possibly causing a short right away.
Click to expand...
Click to collapse
That's my bad; it's like 2am now and I was thinking about something else. I had to download the unrevoked3 program and run it. You're right, I had to uninstall htc sync. I was unable to use the program because it wanted me to enable usb debugging mode, which I am not able to do with my phone in its current state. It could not detect my device.
Someone from another forum stated that after watching my video, he noticed that the image I flashed contained a VZ radio. He said he's heard of cases where users were waiting up to 2 hours in the htc incredible screen before the update is complete. This seems like a very long time, but I'm willing to try.
He wanted me to make sure my phone is fully charged. Then he wants me to run the update in the bootloader and just let it sit. He says it may take up to 2 hours. He said if it doesn't work then it's a hardware related issue caused by the board getting shorted out.
Thanks for all your help!

HiJacK69 said:
No, I haven't. Can you please explain what this is and how it's done? I'm assuming this will pull up the syslog on the phone?
Click to expand...
Click to collapse
You need to have adb installed. If you don't, google how and there are many in depth tutorials. Then, once adb is installed, cd to your adb directory in terminal/command prompt and type ./adb logcat.