Develop Bugs

Big Big Big problem new rom

Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!

You might have better luck asking for assistance on this subject in the Artemis upgrading forum:
http://forum.xda-developers.com/forumdisplay.php?f=318

andreazzo said:
Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!
Click to expand...
Click to collapse
Hard Spl??? For the Artmes?? Mate are you trying to brick your device cause it seems you are doing a pretty good job of it too,Hard Spl is NOT for the p3300 it is for the Hermes and Trinity which are two very very different models of HTC. Please make an effort to read the Wiki before you start messing with the phone.Try flashing the t-mobile stock rom FOR THE ARTEMIS(WITHOUT THE HARD SPL) and hopefully it may work also find out from your buyer if it is CID unlocked though i doubt wether they would know.

Check in Settings - Connections - USB to PC that the USB advanced network functionality is not ticked. That's caught me out in the past after making changes.
This is assuming that others in this forum are correct and you've not yet made a brick using the wrong model. Good luck!

One problem more on rom
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye

andreazzo said:
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye
Click to expand...
Click to collapse
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.

arvind09 said:
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.
Click to expand...
Click to collapse
T-Mobile Here

Did you buy it in China?
If you bought the phone in China, there will be 2 versions. 1 for the chinese market (han huo) and the others are for other markets (usually europe) then flashed with the chinese rom (shui huo). As far as I know the chinese versions aren't locked and the foreign market versions musn't be locked either due to the fact that they have to put on the chinese rom

Offical Rom SSPL loadermethod for p3600 d810 m700 with noSPL noIPL noRadio

For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...

hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??

doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
LOL, sorry mate but that really IS a noob question

works perfect !
Thanks man

doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!

Thank's a lot Shadowmite,
Just one last question before I try :
You're refering to the "Hard-SPL_ZakMcRofl.zip" in your first post. On the other hand, I saw you opening a thread regarding the new "Hard-SPL 1.30 MFG - Oli.zip".
Which one should I/we use, or doesn't it make any difference.
Having a SFR/Vodafone s300+ I'm a bit scared as there's no genuine rom to downgrade back to in case I get blocked.
Bye

because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.

Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thank you so much!
I want to try this ROM right now, but I don´t have access to rapidshare-like sites here in my office.
Can someone upload this ROM to a public server ZIPped and RARed with password (to avoid proxy to sneak into the file... it's blocking some downloads...)
I can setup a FTP account. If someone can upload the ROM to my server, I can share the ROM with people who has the same problem with rapidshare-and-stuff sites.
Thanks!!!

installed the rom.
but....
now i want to return to the original rom and downgrading i obtain a vendor id error.
I tried to cid unlock the device also and the error i the same. any ideas that can help me?
thanks

junwei83 said:
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!
Click to expand...
Click to collapse
wow man ! thanks a LOT ! i really appreciate it
only a few ppl would stop and help
thanks again

racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse
Tried with the Olipro and everything works fine.
Big thanks to all the people on this forum always ready to help.

Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thanx, process working...

Version of this rom?
SEA or ANZ?
Thanks

I've just updated the SPL with the one provided on this post...
It seem to be the Des’ Crash-Proof SPL...
I have this informations on the screen when starting in boot loader mode:
------------------------
TRIN100
IPL-0.50
TRIN100
SPL-9.99.CP
------------------------
which versions we have to use ??
I think that you previously talking about olipro ?
racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse

ROM working but...
Hi there!
First of all thanks for the trouble of getting the nasty bits out of the bundle and giving us just the OS
But... (there seems to be always a "but" with WM6) I've been having some problems with this:
- VOIP is nowhere to be found, no SIP settings anywhere.
- Memory Stick corruption. From time to time my SDHC stick goes crazy, showing up strange characters for the filenames and only a soft-reset gets it back to normal.
- Did any of you guys manage to get Video Calling working?
Well... the major deal for me is the Memory Card issue... Anyone having the same problems? Any ideas?
Best,
M Addario
--
HTC P3600

any hard-spl will work for this repackaging of the release.. you're fine to proceed
yes, you have Des' crash-proof SPL
addario, there's really no need to post the same question in multiple threads..

This rom seem to not contain any ext_rom ...
The "Device Information" module dont report any EXT_ROM version ...
it's "normal" ?

The attached screen capture show the "Device information" tab.
There is no informations about the ext_rom.
I also cannot access to it thru Total Commander.
So... it seem that something is corrupted on this rom update...

Some Info....
@ Shadowmite
Dear could you please tell me from which version did you re-make this ROM & why is there no detail showing of ExtROM in Device Information.

Hi,
I'm completely new to all this but have done my best to try and figure it out for myself but I'd still like to make sure I've understood a few things correctly...
I have an SFR s300+ bought here in France. The OS is WM5 and I'd like WM6.
I have allready tried out the "off"+"camera button"= soft reset to see if I needed to install a hard SPL : I do. I've downloaded Des' Crashproof (due to the reassuring name).
I can now install that by following the guide without backing anything up yet...
Once done I will have to copy all my important info and then I will be able to flash any ROM of my choice (English, French, official or not) is that right? If I'm not mistaken and I can install any ROM, which English ROM is the best (this one looks good...)?
I'd also like to know if I have to install a radio after this or will the one I have at the moment (that works fine) be preserved?
If I do have to install a radio which do you recommend for SFR in France considering I sometimes go to Spain.
Thanks for your help

Serching notice about Custom RUU for flashing

In another 3d Tom_Codon says:
"some edit creat Custom RUU Artemis.They can update Rom with any sizes .."
This is interesting because with my method - Extended Rom on SD - i shuld try to create a very lite Rom and leave user decide how personalize it.
There is someone with notice about this Custom RUU?

bigix1 said:
In another 3d Tom_Codon says:
"some edit creat Custom RUU Artemis.They can update Rom with any sizes .."
This is interesting because with my method - Extended Rom on SD - i shuld try to create a very lite Rom and leave user decide how personalize it.
There is someone with notice about this Custom RUU?
Click to expand...
Click to collapse
No. That's what I've been trying to research and accomplish. My ROMs are already lite ROMs that are customizable, BUT they require padding. (My newest ROM is UC compliant, also.)
I'm still working on the limiter, though...
EDIT: BTW, I'm a Herald cook, not an Artemis cook, but we share the same limiter.

Thanks for answer, but here Tom says it exist.
The real problem is: where get it?

But I wonder if he was just telling us that we should find a way to do that, not that there already is a way.

there is no way at the moment.
just hack the ruuupdateutil.

NikMel said:
there is no way at the moment.
just hack the ruuupdateutil.
Click to expand...
Click to collapse
I have not ability to do it
So, if you find the way please advice me.
Thanks if you can.

bigix1 said:
I have not ability to do it
So, if you find the way please advice me.
Thanks if you can.
Click to expand...
Click to collapse
Ditto. I would love to find a way to.

Well, try my latest ROM http://forum.xda-developers.com/showthread.php?t=366784

NikMel said:
Well, try my latest ROM http://forum.xda-developers.com/showthread.php?t=366784
Click to expand...
Click to collapse
You found a way around it??? I thought it only worked through SD card?? Downloading it now to examine it and see if it's something that can be moved over to the Herald. Is it a modified SPL? A modified RUU software?

looking for O2 UK diamond software ?

anyone who can release o2 uk for diamond fw
thanks for your help
i need it

the O2 firmware is around if you search :]

Addicteddddd said:
the O2 firmware is around if you search :]
Click to expand...
Click to collapse
no correctly
can you let me know where to found it or link ?

I was looking for this too so I have a backup before I change the ROM on my Ignito.
I couldn't find it though, and have spent the last hour and a half searching. Did you manage to find it yet?
I did dump the rom from my phone, but am struggling to make it back into a flashable rom. Would prefer to get hold of a known working original o2 ignito rom.

I dont think anyone has dumped one yet.
Looks like you guys could be the first . Just run through the tutorial on making a backup of your ROM then post it on here .

wardy said:
I dont think anyone has dumped one yet.
Looks like you guys could be the first . Just run through the tutorial on making a backup of your ROM then post it on here .
Click to expand...
Click to collapse
I've already done that, I now have Part00.raw, Part01.raw, Part02.raw and Part03.raw.
As I understand it, Part01 and Part02 make up the ROM.
I did download a kitchen to try and make up a flashable rom myslef, but can't quite figure it out.
If I posted Part01 and Part02 would other people make up a flashable rom (and test it)??

I dont see why not . Lots of clever and helpful people on here . This is what the forum is all about

wardy said:
I dont see why not . Lots of clever and helpful people on here . This is what the forum is all about
Click to expand...
Click to collapse
I think I've managed to figure it out, and i'm about to remake the rom from the stuff I dumped from the phone. Will then try flashing it back and see if it works.
As I understand it, I can't brick it doing this as I haven't messes with the SPL yet, so if it does all go wrong I can then install a hard spl and then flash any rom I want.
Please correct me if i'm wrong and about to brick my phone.

Addicteddddd said:
the O2 firmware is around if you search :]
Click to expand...
Click to collapse
I have been searching for the o2 ignito shipped firmware for a few days now and cannot find it.
If you know where to get it could you please point us in the right direction.
I like to have the official rom available before I start flashing.
Thanks in advance.

Chippie, you managed to do this succesfully yet mate ?
I'm thinking along the same lines as you atm, but I'm a n00b when it comes to cooking. Wouldn't know where to begin despite all the info out there.

Ravin_Dave said:
Chippie, you managed to do this succesfully yet mate ?
I'm thinking along the same lines as you atm, but I'm a n00b when it comes to cooking. Wouldn't know where to begin despite all the info out there.
Click to expand...
Click to collapse
I really don't know.
I've dumped the rom, and then done all the stuff in the rom kitchen, but don't know if what I have ended up with is an actual working rom image.
I'm reluctant to actually try it on my phone in case I brick it.
I've pretty much decided to wait until O2 release an updated ROM before I put a different rom on my phone so that I have an official rom to go back to if needed.

1.12.404.1 nld

CAN ANYONE FIND THIS ROM 1.12.404.1 NLD?
iv been helping a friend for a week now and still no luck, its like it doesnt exist, although, i did find the rom on one site but gotta pay for the download.
he also mentioned ''Gold Card'' im not sure what this is but if anyone knows what to do and wouldnt mind giving me a link or step by step tutorial, this would be a great help.lol
any help will be appreciated.. thank you in advance..

as far as i know, a goldcard is nothing more then the correct rom stored on a SD-card.. it was a way for a lot of commercial people to generate money for bricked devices.
i dont have the image u want though, so im sorry, cant help

you already have helped,lol i read a post this mornin, basicly what you just told me but was unsure because the post was about a differant phone, model etc..
so the only chance to get my friends artemis back to life is with the official rom..
theres plenty of people on this site, (most helpfull, some not lol) but someone out there must have the official nld rom!
cheers..

bricked phone
You can unbrick the phone using a sd card of max. 2 Gb. Search on the formum, i don't remember the exact steps. Basicly, put the rom you want to use on the root of the card, enter the flashmode with the rainbow collored screen and choose the card. Then the flash starts. You can enter the flashmode using the software tool, or use the buttons on your device. For step by step see http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Good Luck.

Did you already searched the wiki? All links are there, although they are outdated.
Official Dutch WM6 HTC ROM is here:
http://member.htc.com/downloadfiles..._NLD_3.13.404.1_4.1.13.44_02.94.90_Ship_R.exe

wiki
yes iv been on the wiki page and wiki was no help..
if someone comes across a link for it, please post a link

looking for wm5 version

lots of people are looking for original wm5.0 NLD rom.
i'd say, join the club and pray that someone is willing to upload it lol

...
i have my original o2 rom, it was the first thing i downloaded after reading uspl.lol
the nld was for a friend but gona give up now, iv tried though..
gona start learning how to cook..

http://forum.xda-developers.com/showthread.php?t=614694
hello all! I'm with the bricked p3300NLD,