Develop Bugs

Big Big Big problem new rom

Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!

You might have better luck asking for assistance on this subject in the Artemis upgrading forum:
http://forum.xda-developers.com/forumdisplay.php?f=318

andreazzo said:
Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!
Click to expand...
Click to collapse
Hard Spl??? For the Artmes?? Mate are you trying to brick your device cause it seems you are doing a pretty good job of it too,Hard Spl is NOT for the p3300 it is for the Hermes and Trinity which are two very very different models of HTC. Please make an effort to read the Wiki before you start messing with the phone.Try flashing the t-mobile stock rom FOR THE ARTEMIS(WITHOUT THE HARD SPL) and hopefully it may work also find out from your buyer if it is CID unlocked though i doubt wether they would know.

Check in Settings - Connections - USB to PC that the USB advanced network functionality is not ticked. That's caught me out in the past after making changes.
This is assuming that others in this forum are correct and you've not yet made a brick using the wrong model. Good luck!

One problem more on rom
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye

andreazzo said:
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye
Click to expand...
Click to collapse
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.

arvind09 said:
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.
Click to expand...
Click to collapse
T-Mobile Here

Did you buy it in China?
If you bought the phone in China, there will be 2 versions. 1 for the chinese market (han huo) and the others are for other markets (usually europe) then flashed with the chinese rom (shui huo). As far as I know the chinese versions aren't locked and the foreign market versions musn't be locked either due to the fact that they have to put on the chinese rom

Stoopid noob needs advice,please dont flame.

Just been given a Vodafone u.k 1605(hermes),the digitiser was trashed so ive soldered in a new one.I would love to install Black 2.5 for T-moblie u.k which is my sim network.Do i just install this to the phone or do i have to take any other action first?The phone is unlocked.
Sorry,i imagine this has been asked many times before.I have seen mention of Hard spl's and other thing a ma jigs lol.
Many thanks Tony

You really have a lot of reading to do. So much that we cannot post it all here. It has taken an entire forum for all of the information. You need to start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Get familiar with what you can do. First thing you are going to want to do is update the boot loader so you don't brick your device. Read here for more information:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL

maxoutput said:
Just been given a Vodafone u.k 1605(hermes),the digitiser was trashed so ive soldered in a new one.I would love to install Black 2.5 for T-moblie u.k which is my sim network.Do i just install this to the phone or do i have to take any other action first?The phone is unlocked.
Sorry,i imagine this has been asked many times before.I have seen mention of Hard spl's and other thing a ma jigs lol.
Many thanks Tony
Click to expand...
Click to collapse
Do not "just install" ... ideally read the wiki first, and then follow instructions on Mrvanx's Guide. Upgrading is pretty painless and easy ... and the guide should keep you on track.

A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony

maxoutput said:
A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony
Click to expand...
Click to collapse
If you follow the advice in link #3 above you wont go wrong.
The site referred to gives you all the knowledge and confidence to do the job.
Trust me I learnt the same way, by reading threads.
good luck!

Sorry peeps,just reading the guide above.I typed before i looked,hopefully all will become clear....ish lol

maxoutput said:
A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony
Click to expand...
Click to collapse
Here is the list you wanted:
Read the wiki
Read the installation guides.
Read the threads concerning the threads on available roms.
Understand what you have read.
Flash your phone.

Here you go... step by step list of everything you need to do to upgrade to the Black 3.0:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=45&Itemid=26

Just about to hard spl and reported bat below 50% so have to wait now for it to charge a little lol.Just tried to download black 3.0 and the link seems to be down,i have black 2.5 is that a good one to flash?
Thanks for everyones help thus far by the way.

maxoutput said:
Just about to hard spl and reported bat below 50% so have to wait now for it to charge a little lol.Just tried to download black 3.0 and the link seems to be down,i have black 2.5 is that a good one to flash?
Thanks for everyones help thus far by the way.
Click to expand...
Click to collapse
My subjective pick is Black 3.01 ...
Remember to go "Hard SPL" first, and that you need to upgrade your radio seperately.

Right just updated the Hard splv7 and my radio to 1.41.00.10,ive also flashed with black 3.0. Now i cant seem to get a wireless link to work or turn on my bluetooth?
Also does this mean i can flash any cooked rom?
Many thanks Tony

Update: it just needed a reboot and all was well.
Getting back to the above question-can i flash with any coocked rom now?
Thanks for all your help.Tony

maxoutput said:
Update: it just needed a reboot and all was well.
Getting back to the above question-can i flash with any coocked rom now?
Thanks for all your help.Tony
Click to expand...
Click to collapse
generally speaking, yes.... but be sure you are flashing OS only (unless you want to upgrade your radio too). Most folks are putting out OS only upgrades now, but some replace the radio. once you are hard spl and no longer a flashing virgin, it becomes second nature.

Thanks for everyones help,all sorted,nice one!

Wow what a refreshing read. A noob explaining himself and asking clear questions and members helping him out in an open and non-judgemental way...
Well done everyone!

...and no flames...
Kudos go to MrVanx for those incredible guides.

Yep superb guides and a very noob friendly thread,thanks again peeps.Flashed to a couple of different roms today to check them out.

[TUT]Racerx's modmydiamond.info **UPDATED 23 JULY**

Step-by-Step upgrade guides for your Diamond
www.modmydiamond.info
UPDATE 23RD JULY: added some extra FAQ's..
UPGRADE GUIDES
*Complete Diamond Upgrade Guide
*Hard SPL Upgrade Guide
*Radio Upgrade Guide
FAQ's
*General FAQ
how to prevent battery drain
how to exit bootloader
how to enable GPS
How can I get iGO to work with my internal storage?
how do i perform a hard reset?
how do i get rid of exclamation marks in TF3D Music Library?
*Upgrade FAQ
[*]will flashing a new ROM wipe out my 4GB internal storage?
[*]how to return to original spl
[*]do I have to reinstall Hard-SPL after flashing a new ROM
[*]error at 0%NEW!
*Upgrade Problem FAQ
error at 0%updated!
error at 5%NEW!
after upgrading, my screen is fuzzy, flickering, or blackNEW!
It's definitely not final, but it's a start, and thought it would help the growing Diamond community here. it's actually a lot more work than what it looks like to get all the info up and organized. As always, donations are appreciated.
If you have feedback, comments, and even questions, please post in this thread so i can see how to address them in subsequent updates.
thanks to the ELITE team, ROM chefs, and everyone that made upgrading our diamonds possible!

Niceeeeeeeeeeeee

Looks good mate. Keep it coming!

My one issue with this (and only a small one!) is that .info sites are notorious for scammers. Obviously thats not a scam site but you don't wanna be tarred with same brush!

really? ha well, the main reason is that a .info is $0.99/year haha (maybe its cheap since they're only used by scammers now?)... and i don't think it hurt trinityguides being on an .info domain.. but if accessing a .com would make you feel more at home, then donate away!

LOL 99c - no wonder they are used by scammers.... !!

Looks really nice. Keep up the good work.

Hmm.. I know it sounds very stupid and yes it is.
I do not know which version I had before. It was one of the earlie Expansys Models build for UK. Does someone know which SPL was the original one?
Cheers

hmm... i don't know about that. wouldn't it be the one on the official UK ROM that's circulating? or is that without SPL?

It was an original UK-ROM. So I guess a UK device.
Bought her ein germay from a company who had the device already 2 weeks ago.
Everything was in english and the default region was set to english (uk).
Maybe I ned to have a look at the box. Maybe I can find more info about the device there.

thommic said:
It was an original UK-ROM. So I guess a UK device.
Bought her ein germay from a company who had the device already 2 weeks ago.
Everything was in english and the default region was set to english (uk).
Maybe I ned to have a look at the box. Maybe I can find more info about the device there.
Click to expand...
Click to collapse
Sorry .. got you wrong. I dont kow if a SPL is included.
Will try later.

Hey Racer ,
THANKS so much , I just used your site to do my first flash from I have now Flashed my diamond from the HK 1.34.831.1 to a malyasian 37.404 and WOW now I can use the phone as I thought it should be thanks so much for real . I mean the lag and stuf is tottally gone and I really love my phone .. I also aded totmtom and I cant think of anything other than games I might want to add

glad it helped..
update 2 July.. added a couple more faq's... more updated coming.. if anyone has suggestions for things to add, please let me know

Updated 5th July.. couple more FAQ's, and FAQ restructuring

updated 15th July.. added Radio upgrade guide.. updated Diamond upgrade guide to reflect upgrade of radio.
still to do: tweaks section.. (and whatever else you guys think of)

updated 17th july..
FAQ for 0% error
Guides now reflect Jockyw2001's hard-spls..

Really nice.
Some basics need to be Explained:
SPL,Radio,ROM differences, three parts.
What is a ROM
What is SPL and Bootloader
Why do we need HardSPL
What happens when we Flash Rom
What happens with hard reset
What happens with soft reset
What is the Radio Rom
Internal Storage and Memory difference
These basics will make a newbe more familiar with procedure.
IT's very well explained how HARDSPL install works, but when never done this, no-one will know what HARDSPL is and a newbie never is sure enough about it to just flash without asking us. And we want this Explanations, so one does not have to ask

Please help! Diamond will not boot
Hi
I did something really stupid. I was having battery drain issues with my new Touch Diomand, so I logged into HTC website to get the firmware upgrade.
I used to have an HTC Touch, and that was the only firmware available on their site, at the time I did not realise that it was the wrong one for me !
So I started installing it, it failed, and now I get the rainbow screen at startup.
I have tried hard reset, no joy. I have called HTC, they cannot help. No-one here in NZ services these phones, so I am stuck.
I have tried installing the firmware update from modmydiamond.info, but I STILL get the same problem, it just shows the rainbow screen and I cannot continue from there...
On a PC,this would be a bootstrap issue, I have no idea what to do (other than buying an iphone) any wisdom ??

That site is really nice...it introduced me to the HTCD flash world...
thanks.

Link named Hard-SPL 1.40 points to version 1.30
Hi,
On page Home -> Upgrade Guides -> Upgrade to Hard-SPL it says:
Download a Hard-SPL from the forums here
Hard-SPL 1.40 Olinex SIGNED
I succesfully downloaded and installed the Olinex Hard-SPL, but when I enter
the bootloader te tri-colour screen reads SPL-1.30 OliNex i.s.o. 1.40. What
did I do wrong? What are the differences between 1.30 and 1.40?
Thanks in advance,
Flat
P.S.: Great site!!

Help please

PLEASE COULD ANYONE HELP ME TO SOLVE MY PROBLEM. I AM NEW TO THIS SITE AND THE WHOLE EPISODE OF ROM FLASHING. I READ THROUGH THE INSTRUCTIONS COUPLE OF TIMES BUT WOULD NOT UNDERSTAND. A FRIEND HAS HELP FLASHED THE ROM ON MY P3300, THE ROM IS NOT FUNCTIONING WELL AT ALL. MANY FEATURES SUCH AS BLUETOOTH AND THE CAMERA ARE NOT WORKING.
I AM THINKING OF STARTING FROM THE SCRATCH ON MY OWN AS MY FRIEND HAS RELOCATED ABROAD.
I AM A LAY MAN I NEED SOMEONE TO HELP ME BY TELLING OR TEACHING ME HOW TO RE-FLASH THIS ROM SO THAT COULD BE ABLE TO ENJOY MY P3300 AS BEFORE
THANK YOU.

...
on startup you see red numbers and letters..
what are they?
i you see 1.11.cmon
you can flash any rom on the artems forum..
if you do not have that..
click the link for UPLOADS FOR P3300
download 1.1.cmon (its spelt wrong, i know..lol)
read the dummies guide..
*do not soft reset though!
any problems, pm me..
im here to help..
Rn

Welcome to xda-developers, solaabdul.
First of all, why all those caps? It's perfectly readable in normal letters.
Secondly, everyone wants a "flashing for dummies guide" and a personal trainer to get the latest roms on their device. The trick is, finding those guides by using the "search" function, on top of this forum.
You can use the advice given by Raving_nanza to get your device updated.
Good luck in finding the right rom for your device.

[Q] Rom upgrading - cant find it on here or google!

Hi All
Well, after being without one for almost 5 years ... I have bought a second hand HTC Universal, mine to be specific is the O2 XDA Exec.
Being as it was second hand all I got was the handset and USB cable, no discs, box ... nothing! I am really trying to down-grade the ROM on it. It currently has WM6.5 .. and from what I can tell it is defo a cooked ROM from somewhere. I want to down grade to WM5 so it is faster and I dont need any of this fancy stuff as I will be using it for home automation.
I have done ROM upgrading before on my old HTC Touch HD ... so can anyone point me in the right direction please

Welcome to fora, have a look on my sig link, you´ll find what u need.

really being said by orb3000, you can get it from the link in his signature or you find at http://forum.xda-developers.com/wiki/index.php?title=Universal_ROMS_Radios

Hello all again.
Please please can someone help me here. My HTC Uni is now a brick, stuck in bootloader.
I have done the task 28 55aa and from what I can tell, it did what it was meant to. I cant seem to upgrade any roms tho, I have downloaded 5 so far and all have failed saying it cannot find RAPI.dll ... can anyone help me please?

Sorry, maybe I should explain what I have tired! Might help lol
OK, I bought this of eBay and it came with a really bad home cooked Rom that was really slow and laggy. I wanted to downgrade it down to WM5 again so I picked a ROM of here and set about updating. At this point I need to mention this, I cant remember the name of the rom BUT I DO NOT BLAME the cooker of the rom, any rom cookers or xda developers for the problems I now have ... i did this fully knowing i am doing it at my own risk!
So, I didnt do alot off research and found out later that you need a special driver to flash in windows 7. Since trying to flash my HTC it has been stuck in boot loader. I have tried the task 28 55aa, tried upgrading just the radios and just the roms. Hard reset .. all that I can think and no luck at all.
Some of the roms come wtih "MaUpgradeUt_noID" this works, but the "ROMUpgradeUt" doesnt as it says the RAPI.dll file is missing.
Please can someone help me!

Again, on my sig link you´ll find a lot of help threads for problems like that.
I can recommend you to do a DOC format, instructions on my link as well.

all is well now, thanks orb. without your super guide I'd still have a dead HTC.
For all those who want to know, I had to upgrade my ROM on a windows XP machines ... luckily work surprisingly allowed me to do it!!