Related
Hey there!
I have installed Some of helmi_c ROMs (AKU 3.5 beta 13, WM6) and I'm always facing the same problems with the UserAgent. The first thing I noticed was that if I create a new connection (Celularline 3G) and I connect to the Internet I don't see a "3G" connection symbol in the taskbar but only a "G". This wasn't so with my last ROM (German 1.30.96)
Now to the main problem:
My cellular network provider in Austria is "Three". To get to their mobile internet zone called "Planet3" I have to change the UserAgent Default="Nokia6680" so the server thinks I am this cell phone and then I can watch the content. This works with all ROMs I found at the FTP server, except those from helmi_c (those I've tested). I also tried a ROM from Ivan (AKU 3.2) and this worked.
Now I want to switch to WM6 but it doesn't work.
I hope you guys can help me!
Best regards
Tom
ThomasPP said:
Hey there!
I have installed Some of helmi_c ROMs (AKU 3.5 beta 13, WM6) and I'm always facing the same problems with the UserAgent. The first thing I noticed was that if I create a new connection (Celularline 3G) and I connect to the Internet I don't see a "3G" connection symbol in the taskbar but only a "G". This wasn't so with my last ROM (German 1.30.96)
Now to the main problem:
My cellular network provider in Austria is "Three". To get to their mobile internet zone called "Planet3" I have to change the UserAgent Default="Nokia6680" so the server thinks I am this cell phone and then I can watch the content. This works with all ROMs I found at the FTP server, except those from helmi_c (those I've tested). I also tried a ROM from Ivan (AKU 3.2) and this worked.
Now I want to switch to WM6 but it doesn't work.
I hope you guys can help me!
Best regards
Tom
Click to expand...
Click to collapse
The answer to the first problem is simple - almost all of the AKU 3.5 / WM6 ROMs on this site specifically say that they don't support the change of that little icon from G to 3G and vice versa. You should see the main icon change from G to 3G, though.
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=293375
Hello again!
Thanks for your help, I also found this thread and copied the dll file, now it shows the right icon... But this was only a side effect of the main problem.
I installed Netfront, and when I change the UserAgent in the program itself it works perfectly. So it must be a problem of PIE. You might ask, why I don't use Netfront overall? Well, the answer is simple, Netfront doesn't support to open a rtsp stream in the Streaming Player, and I want to watch the videos and TV programs on my Qtek.
So please helmi_c or someone else, help me to solve my problem!
I think this doesn't only affect me, but many others too.
Best regards
Tom
I'd be interested in the solution to the UserAgent problem too, if for no other reason than to make Google give me the standard page, rather than the PDA version.
Pocket IE in Crossbow with MultiIE installed is now my browser of choice over Opera 8.6, but it is a bit of a pain that I can't seem to change the UserAgent, despite altering a number of settings in the registry.
Cheers,
Steve
Can't help with the user agent thing, but for Google, you can use the following address to get "full" Google on a PPC without any registry edits...
http://www.google.com/webhp
Still need some help plz!
I can limit this problem to the PIE, so does anyone know why the phone ignores the UserAgent? What registry key can I change in addition sot that the phone sends the right UserAgent?
best regards
Tom
*push*
no solution now... plz help!
Same problem on HTC TyTn with AKU3.3+.
Maybe the PIE doesn't send the User Agent, or the wrond User Agent.
How can we read out the User Agent String in the sent information?
http://forum.xda-developers.com/showthread.php?t=290818
this thread may be of some help
No doesn't help, tried like posted in this thread, but still the same.
It is 99% the PIE which doesn't send the User Agent, because with older ROM it works again, and with Netfront too.
There is really a bug in PIE on AKU3.3 and as i heard on WM6 too in german forum.
Here the Standard User Agent Setting:
Cache-Control: max-age=259200
Connection: keep-alive
Via: 1.1 proxy.google.com:80 (squid)
Accept: text/html, application/xhtml+xml, image/png, image/tiff, image/jpeg, image/gif, image/bmp, text/plain, application/pdf;q=0.1, application/zip;q=0.1, application/msword;q=0.1, application/vnd.ms-excel;q=0.1, application/wordperfect, application/x-wordperfect, application/wpwin, application/x-wpwin, */*;q=0.1
Accept-Charset: ISO-8859-1, UTF-8, *;q=0.5
Accept-Encoding: gzip
Accept-Language: en-us
Host: www.fiddlertool.com
Referer: HYPERLINK http://blogs.msdn.com/ie/archive/2005/04/27/412813.aspx http://blogs.msdn.com/ie/archive/2005/04/27/412813.aspx
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder
X-Forwarded-For: deleted, unknown
ASPNET's HTTPBrowserCapabilities object reports that based on the User-Agent, your Browser has the following capabilities:
Type = IE6
Name = IE
Version = 6.0
Major Version = 6
Minor Version = 0
Platform = Win2000
Is Beta = False
Is Crawler = False
Is AOL = False
Is Win16 = False
Is Win
32 = True
Supports Frames = True
Supports Tables = True
Supports Cookies = True
Supports VBScript = True
Supports JavaScript = True
Supports Java Applets = True
Supports ActiveX Controls = True
Here with changes made to Registry at User Agent-String:
HKLM\SOFTWARE\Microsoft\Current Version\Internet Settings\5.0\User Agent\
Default changed to another value e.g. Nokia
Cache-Control: max-age=259200
Connection: keep-alive
Via: 1.1 proxy.google.com:80 (squid)
Accept: text/html, application/xhtml+xml, image/png, image/tiff, image/jpeg, image/gif, image/bmp, text/plain, application/pdf;q=0.1, application/zip;q=0.1, application/msword;q=0.1, application/vnd.ms-excel;q=0.1, application/wordperfect, application/x-wordperfect, application/wpwin, application/x-wpwin, */*;q=0.1
Accept-Charset: ISO-8859-1, UTF-8, *;q=0.5
Accept-Encoding: gzip
Accept-Language: en-us
Host: www.fiddlertool.com
Referer: HYPERLINK http://blogs.msdn.com/ie/archive/2005/04/27/412813.aspx http://blogs.msdn.com/ie/archive/2005/04/27/412813.aspx
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder
X-Forwarded-For: deleted, unknown
ASPNET's HTTPBrowserCapabilities object reports that based on the User-Agent, your Browser has the following capabilities:
Type = IE6
Name = IE
Version = 6.0
Major Version = 6
Minor Version = 0
Platform = Win2000
Is Beta = False
Is Crawler = False
Is AOL = False
Is Win16 = False
Is
Win32 = True
Supports Frames = True
Supports Tables = True
Supports Cookies = True
Supports VBScript = True
Supports JavaScript = True
Supports Java Applets = True
Supports ActiveX Controls = True
As we can see the User Agent is still Mozilla/4.0, even if changing all Mozilla-Strings to Nokia, always sending Mozilla/4.0. The User Agent seems to be written constantly to one of the IE-Files in Windows Directory. Can some developer change the 4 hidden files beginning with IE in Windows-dir to ones from Trinity-ROM or AKU2.3-ROM? There it's working.
This is the sent User Agent when Registry Key change is working and sent correctly. Shown as Echo at http://fiddlertool.com/useragent.aspx
Your browser sent the following headers:
Connection: Keep-Alive
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-ms-application, application/vnd.ms-xpsdocument, application/xaml+xml, application/x-ms-xbap, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
Accept-Encoding: gzip, deflate
Accept-Language: de-at
Host: fiddlertool.com
User-Agent: Nokia (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.0.04506; InfoPath.1)
UA-CPU: x86
________________________________________
ASPNET's HTTPBrowserCapabilities object reports that based on the User-Agent, your Browser has the following capabilities:
Type = Unknown
Name = Nokia
Version = 0.0
Major Version = 0
Minor Version = 0
Platform = WinNT
Is Beta = False
Is Crawler = False
Is AOL = False
Is Win16 = False
Is Win32 = True
Supports Frames = False
Supports Tables = False
Supports Cookies = False
Supports VBScript = False
Supports JavaScript = False
Supports Java Applets = False
Supports ActiveX Controls = False
The User Agent can be read out here: http://fiddlertool.com/useragent.aspx
A solution is here for making the User Agent changeable again with AKU3.3+, maybe for Universal too:
http://forum.xda-developers.com/showthread.php?p=1184509#post1184509
EDIT 11-09-2010:
It is done! This one here dated 11th September 2010 is so far the fastest running Port I have made. Indeed it runs like hell on my Diamond. This one is RC2 and close to final. The Base has changed completely. RC1 used Incubus's SuperFroyo-ROM. Now, RC2 is using [email protected]'s SuperFroyo-ROM and has a great Superman-Styled-Theme.
What's working on my Diamond:
WiFi, Data, Bluetooth, Market, Sd-Card, this & that
Notice:
This build has disactivated compcache - but runs fast w/o it! To activate it you may use terminal. If you are kind enough then just play around with swapper2 and let me know what works best for you: Compcache or Swap?
Neopeek's SuperFroyo RC2 Port [CyanogenMod6]
waiting the release....
thanks!
Hopefully tonight since I've got work tomorrow. ;D
Is this based off CyanogenMod in the sense that I'll be able to change font colors and such easily?
great！
one more release can be used. thx.
vatoloco said:
as stated in my cyanogen-thread i will wait for rc4 / final before bringing a new cm6-port out. In the meantime i didn't also sleep much cause i was working on some other builds, too. Soon i will release a few bugfix-updates on all my eclair-ports. So said maybe some of you remember my supereclair-port from incubus? Hehe now i ported superfroyo from incubus successfully. Just polishing it up a lil bit and updating some things so it works well. So far everything is working - except bluetooth but just a matter of time. Speed is good - really good.
So now countdown! I will release it maybe today or tomorrow!
Here is the link to incubus's thread:
superfroyo
Click to expand...
Click to collapse
great job!!! Thx```
awaiting your release.....may be this build fix the hardware buttons that got crazy in every build...
RC1 of SuperFroyo is available (see first post). As CM& Stable is now available I hope that some of you try out SuperFroyo and report bugs so I can fix 'em some days later. Except Bluetooth everything worked well for me in SuperFroyo although Compache and Jit are disabled by default. But it runs quite fast. Try it out yourself
the wi-fi don't work
minimotardsp said:
the wi-fi don't work
Click to expand...
Click to collapse
And neither does your language skills either.
I'm downloading it now and will test it soon and post my feedback or noticeable bugs.
The wi-fi does work! The taskbar icon appears after you go to wi-fi setting and enter password.
GMail & Marketplace now works as well.
Sync to office Kerio mail server works.
Speakerphone works.
Most basic phone feature works.
Can't test GPS at the moment as I'm indoor.
Pressing Home button (power) brings up overview of all the 3 screens ... interesting? A feature of LauncherPro?
Hope the bluetooth issue get's resolve soon.
Thanks vatoloco for this RC1 build, this should be a good solid framework to the direction of a fast stable Android.
howeasy said:
And neither does your language skills either.
I'm downloading it now and will test it soon and post my feedback or noticeable bugs.
Click to expand...
Click to collapse
i don't speck english, i am italy end i have reported a bug for my htc touch diamond 100
minimotardsp said:
i don't speck english, i am italy end i have reported a bug for my htc touch diamond 100
Click to expand...
Click to collapse
Wifi does indeed function correctly, tested it myself.
You should try a fresh reinstall
performance results
On a RAPH800 (Telus Touch Pro)
- wifi works
- marketplace works
- quadrant benchmark of 342
- gets really hot (with or without wifi on)
- exchange server sync works
- seems to be about same speed as xandroid (2.2 from Aug. 18)
- phone works
Not sure what else I should be testing. With it getting so hot, I've switched back to Xandroid for the moment.
Update on the speed testing - XAndroid of 449 on quadrant benchmark, so it seems a little faster currently.
I encountered a pretty big bug.
When you power off the phone with Wifi enabled the next time you launch Haret you will be stuck at a boot loop.
Apparently its having trouble starting wifi on boot, it just doesnt work.
Code:
D/Tethering( 1193): tiwlan0 is not a tetherable iface, ignoring
D/wlan_loader( 1327): adapter tiwlan0, eeprom /data/wifi-calibration, init /etc/wifi/tiwlan.ini, firmware /etc/wifi/Fw1251r1c.bin
W/dalvikvm( 1193): threadid=19: thread exiting with uncaught exception (group=0x400207f0)
E/AndroidRuntime( 1193): *** FATAL EXCEPTION IN SYSTEM PROCESS: WindowManagerPolicy
E/AndroidRuntime( 1193): java.lang.NullPointerException
E/AndroidRuntime( 1193): at android.app.StatusBarManager.disable(StatusBarManager.java:76)
E/AndroidRuntime( 1193): at com.android.internal.policy.impl.KeyguardViewMediator.adjustStatusBarLocked(KeyguardViewMediator.java:1054)
E/AndroidRuntime( 1193): at com.android.internal.policy.impl.KeyguardViewMediator.handleShow(KeyguardViewMediator.java:983)
E/AndroidRuntime( 1193): at com.android.internal.policy.impl.KeyguardViewMediator.access$700(KeyguardViewMediator.java:94)
E/AndroidRuntime( 1193): at com.android.internal.policy.impl.KeyguardViewMediator$2.handleMessage(KeyguardViewMediator.java:847)
E/AndroidRuntime( 1193): at android.os.Handler.dispatchMessage(Handler.java:99)
E/AndroidRuntime( 1193): at android.os.Looper.loop(Looper.java:123)
E/AndroidRuntime( 1193): at com.android.server.WindowManagerService$PolicyThread.run(WindowManagerService.java:606)
I/ActivityManager( 1193): Starting activity: Intent { act=android.intent.action.MAIN cat=[android.intent.category.HOME] flg=0x10000000 cmp=com.fede.launcher/.Launcher }
D/wlan_loader( 1327): Configuring adapter
I/ActivityManager( 1193): Launching preboot mode app: ProcessRecord{441a5578 1321:com.android.providers.calendar/10028}
I/Process ( 1193): Sending signal. PID: 1193 SIG: 9
D/BootAnimation( 1202): SurfaceFlinger died, exiting...
downloading now for my raph100 and will report any bugs if found.
howeasy said:
I encountered a pretty big bug.
When you power off the phone with Wifi enabled the next time you launch Haret you will be stuck at a boot loop.
Apparently its having trouble starting wifi on boot, it just doesnt work.
Code:
D/Tethering( 1193): tiwlan0 is not a tetherable iface, ignoring
D/wlan_loader( 1327): adapter tiwlan0, eeprom /data/wifi-calibration, init /etc/wifi/tiwlan.ini, firmware /etc/wifi/Fw1251r1c.bin
W/dalvikvm( 1193): threadid=19: thread exiting with uncaught exception (group=0x400207f0)
E/AndroidRuntime( 1193): *** FATAL EXCEPTION IN SYSTEM PROCESS: WindowManagerPolicy
E/AndroidRuntime( 1193): java.lang.NullPointerException
E/AndroidRuntime( 1193): at android.app.StatusBarManager.disable(StatusBarManager.java:76)
E/AndroidRuntime( 1193): at com.android.internal.policy.impl.KeyguardViewMediator.adjustStatusBarLocked(KeyguardViewMediator.java:1054)
E/AndroidRuntime( 1193): at com.android.internal.policy.impl.KeyguardViewMediator.handleShow(KeyguardViewMediator.java:983)
E/AndroidRuntime( 1193): at com.android.internal.policy.impl.KeyguardViewMediator.access$700(KeyguardViewMediator.java:94)
E/AndroidRuntime( 1193): at com.android.internal.policy.impl.KeyguardViewMediator$2.handleMessage(KeyguardViewMediator.java:847)
E/AndroidRuntime( 1193): at android.os.Handler.dispatchMessage(Handler.java:99)
E/AndroidRuntime( 1193): at android.os.Looper.loop(Looper.java:123)
E/AndroidRuntime( 1193): at com.android.server.WindowManagerService$PolicyThread.run(WindowManagerService.java:606)
I/ActivityManager( 1193): Starting activity: Intent { act=android.intent.action.MAIN cat=[android.intent.category.HOME] flg=0x10000000 cmp=com.fede.launcher/.Launcher }
D/wlan_loader( 1327): Configuring adapter
I/ActivityManager( 1193): Launching preboot mode app: ProcessRecord{441a5578 1321:com.android.providers.calendar/10028}
I/Process ( 1193): Sending signal. PID: 1193 SIG: 9
D/BootAnimation( 1202): SurfaceFlinger died, exiting...
Click to expand...
Click to collapse
i have your problem
what?I can't work on my touch pro !always stay at "reboot in 7 secs"
rom is very snappy everythings quick besides default browser but this could be because of stock processor speed. i get force close for google services framework (process com.google.process.gapps) alot
3G,calls,sms,mms all work
GPS havnt tested
Market place works fine
wifi cant seem to get to work not sure why
email and gmail app work
also when i was in initial setup of the phone it wouldnt connect to my google account
spsun said:
what?I can't work on my touch pro !always stay at "reboot in 7 secs"
Click to expand...
Click to collapse
just reset it.
Thanks a lot ... Just downloading... I will post my testing report after using ...
hello guys
I have an idea for a pllicazione wp7 but I have a small problem to beginners.
I'm creating my application with VB but I can not change the Registry Key
with VB for win 7 so I did:
Imports Microsoft.Win32
Public Class Form1
Private Sub Form1_Load (ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim RegKey As RegistryKey
RegKey = Registry.LocalMachine.OpenSubKey ("SOFTWARE", True)
regKey.CreateSubKey ("MyApp")
regKey.Close ()
end Sub
end Class
WP visual studio but this does not work,
Someone can help me? Thanks!
Use WP7 Root Tools SDK.
Thanks
Not sure where I went wrong, but whenever I try to go to Settings -> Wireless and network - More settings I get the error message "Unfortunately the process com.android.phone has stopped".
Prior to getting this message I was able to go in and change my network settings (switching between CDMA and CDMA/LTE).
I had removed the following using Titanium Backup:
AllShare Cast
AllShare Play
AllShare Service
Connections Optimizer
Kies via Wi-Fi
Kies air
Mobile Tracker
SNS
Sprint Installer
Sprint Zone
Talk
Voicemail
Windy Weather
Once I started getting this error I restored app & data for Mobile Tracker, SNS and Sprint Installer (hoping one of those were the cause). I also cleared data on the Phone app and the above 3 apps. I've rebooted multiple times, and it still FCs. My 3G data still works, as do the phone functions. I just can't get in to change the network.
Any help is appreciated.
Edit - Here is a logcat of it happening:
Code:
10-26 11:36:58.205 I/InputReader( 2412): Touch event's action is 0x0 (deviceType=0) [pCnt=1, s=0.52 ]
10-26 11:36:58.205 I/InputDispatcher( 2412): Delivering touch to current input target: action: 0x0
10-26 11:36:58.205 I/InputDispatcher( 2412): Delivering touch to current input target: action: 0x0
10-26 11:36:58.205 I/InputDispatcher( 2412): Delivering touch to current input target: action: 0x0
10-26 11:36:58.205 I/InputDispatcher( 2412): Delivering touch to current input target: action: 0x0
10-26 11:36:58.205 D/lights ( 2412): button : 1 +
10-26 11:36:58.205 D/lights ( 2412): button : 1 -
10-26 11:36:58.205 I/PowerManagerService( 2412): Ulight 0x3->0x7|0x0
10-26 11:36:58.205 D/LightsService( 2412): setLightLocked is called
10-26 11:36:58.260 I/InputReader( 2412): Touch event's action is 0x1 (deviceType=0) [pCnt=1, s=]
10-26 11:36:58.260 I/InputDispatcher( 2412): Delivering touch to current input target: action: 0x1
10-26 11:36:58.260 I/InputDispatcher( 2412): Delivering touch to current input target: action: 0x1
10-26 11:36:58.260 I/InputDispatcher( 2412): Delivering touch to current input target: action: 0x1
10-26 11:36:58.260 I/InputDispatcher( 2412): Delivering touch to current input target: action: 0x1
10-26 11:36:58.270 W/SignalStrength( 2412): getCdmaLevel =5
10-26 11:36:58.270 W/SignalStrength( 3134): getCdmaLevel =5
10-26 11:36:58.270 W/SignalStrength( 3134): getCdmaLevel =5
10-26 11:36:58.270 W/SignalStrength( 2412): getCdmaAsuLevel=8
10-26 11:36:58.270 D/STATUSBAR-NetworkController( 3134): onSignalStrengthsChanged signalStrength=SignalStrength: 99 0 -77 -45 -89 -25 6 99 2147483647 2147483647 2147483647 2147483647 cdma 0x500 level=5
10-26 11:36:58.340 I/power ( 2412): *** acquire_dvfs_lock : lockType : 1 freq : 1000000
10-26 11:36:58.340 D/PowerManagerService( 2412): acquireDVFSLockLocked : type : DVFS_MIN_LIMIT frequency : 1000000 uid : 1000 pid : 2412 tag : ActivityManager
10-26 11:36:58.340 W/ActivityManager( 2412): mDVFSLock.acquire()
10-26 11:36:58.385 D/KeyguardViewMediator( 2412): setHidden false
10-26 11:36:58.385 D/WindowManager( 2412): mInputFocus is not null.
10-26 11:36:58.390 D/PointerIcon( 2412): setHoveringSpenIconStyle1 pointerType: 10001iconType:1
10-26 11:36:58.390 D/PointerIcon( 2412): setHoveringSpenCustomIcon IconType is same.1
10-26 11:36:58.390 D/WindowManager( 2412): mInputFocus is not null.
10-26 11:36:58.390 D/WindowManager( 2412): mInputFocus is not null.
10-26 11:36:58.425 D/dalvikvm( 8871): GC_CONCURRENT freed 335K, 7% free 13594K/14535K, paused 3ms+9ms, total 34ms
10-26 11:36:58.430 D/ApplicationPolicy( 2412): isStatusBarNotificationAllowed: packageName = net.dinglisch.android.taskerm
10-26 11:36:58.435 D/STATUSBAR-NotificationService( 2412): Noti Alert - mSystemReady:true, AlertEnabled:true
10-26 11:36:58.460 D/AbsListView( 8871): Get MotionRecognitionManager
10-26 11:36:58.460 D/MotionRecognitionService( 2412): ssp status : true
10-26 11:36:58.490 D/dalvikvm( 8871): GC_FOR_ALLOC freed 89K, 6% free 13800K/14599K, paused 14ms, total 14ms
10-26 11:36:58.500 D/AbsListView( 8871): Get MotionRecognitionManager
10-26 11:36:58.505 D/dalvikvm( 2412): GC_CONCURRENT freed 2028K, 36% free 32818K/50823K, paused 5ms+10ms, total 109ms
10-26 11:36:58.515 I/NetworkModePreference( 8871): phoneType=2
10-26 11:36:58.520 I/EDM : ( 2412): isDataRoamingEnabled : true
10-26 11:36:58.525 I/EDM : ( 2412): isDataRoamingEnabled : true
10-26 11:36:58.530 D/AndroidRuntime( 8871): Shutting down VM
10-26 11:36:58.530 W/dalvikvm( 8871): threadid=1: thread exiting with uncaught exception (group=0x41e512a0)
10-26 11:36:58.535 E/AndroidRuntime( 8871): FATAL EXCEPTION: main
10-26 11:36:58.535 E/AndroidRuntime( 8871): java.lang.RuntimeException: Unable to resume activity {com.android.phone/com.android.phone.MobileNetworkSettings}: java.lang.IllegalArgumentException: Unknown package: com.birdstep.android.cm
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.app.ActivityThread.performResumeActivity(ActivityThread.java:2616)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.app.ActivityThread.handleResumeActivity(ActivityThread.java:2644)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2130)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.app.ActivityThread.access$600(ActivityThread.java:140)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1227)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.os.Handler.dispatchMessage(Handler.java:99)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.os.Looper.loop(Looper.java:137)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.app.ActivityThread.main(ActivityThread.java:4898)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at java.lang.reflect.Method.invokeNative(Native Method)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at java.lang.reflect.Method.invoke(Method.java:511)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1006)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:773)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at dalvik.system.NativeStart.main(Native Method)
10-26 11:36:58.535 E/AndroidRuntime( 8871): Caused by: java.lang.IllegalArgumentException: Unknown package: com.birdstep.android.cm
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.os.Parcel.readException(Parcel.java:1429)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.os.Parcel.readException(Parcel.java:1379)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.content.pm.IPackageManager$Stub$Proxy.getApplicationEnabledSetting(IPackageManager.java:2906)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.app.ApplicationPackageManager.getApplicationEnabledSetting(ApplicationPackageManager.java:1306)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at com.android.phone.MobileNetworkSettings.onResume(MobileNetworkSettings.java:640)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.app.Instrumentation.callActivityOnResume(Instrumentation.java:1199)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.app.Activity.performResume(Activity.java:5265)
10-26 11:36:58.535 E/AndroidRuntime( 8871): at android.app.ActivityThread.performResumeActivity(ActivityThread.java:2606)
10-26 11:36:58.535 E/AndroidRuntime( 8871): ... 12 more
10-26 11:36:58.540 D/WindowManager( 2412): mInputFocus is not null.
10-26 11:36:58.545 E/android.os.Debug( 2412): [email protected] > dumpstate -k -t -z -d -o /data/log/dumpstate_app_error
10-26 11:36:58.545 D/WindowManager( 2412): mInputFocus is not null.
10-26 11:36:58.550 I/dumpstate(15059): begin
I've also pulled the dump file if that would be helpful.
SOLVED
It was the Connections Optimizer. I restored that and it's data, now I can get into the Mobile Networks screen and change the settings!
help please
enormous said:
SOLVED
It was the Connections Optimizer. I restored that and it's data, now I can get into the Mobile Networks screen and change the settings!
Click to expand...
Click to collapse
Hello, thanks for your time on this, could you please guide how to do the connection optimizer restore with data.. Thanks..
jayalaba said:
Hello, thanks for your time on this, could you please guide how to do the connection optimizer restore with data.. Thanks..
Click to expand...
Click to collapse
I used Titanium Backup to restore the app + data. But in order to do that you have to have backed up the app with TiBu before you removed it...
thanks.. but
enormous said:
I used Titanium Backup to restore the app + data. But in order to do that you have to have backed up the app with TiBu before you removed it...
Click to expand...
Click to collapse
Thanks very much Mr. I could not find that in TB. I have moto photon and I am having error message when I use wifi call, I could hear the incoming ring with the error message.. Any advise will be appreciate .. thanks..
If you want to delete the connection optimizer instead of freeze it, you have to make a mod to the secphone apk.
FYI- if it helps in development (if anyone else is trying to crack root and bootloader for tcl devices- they do not release thier firmware to the public... but the do over the air (which is logged ) Pasting the bits from the 1millions lines of log- where the link to the firmware was generated- I downloaded the file and will share on random platform here shortly. Im not sure how long the random links will last though.
https://g2slave-ap-north-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
1-13 22:09:02.715 5777 6697 I OtaApp###D: small task: SmallDownloadTask{mId='2', mPausedReason=0, mCurrentBytes=0, mTotalSize=278089150, downloadSpeed=0, status=1, mFrom=556178300, mUrl='https://g2slave-eu-west-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394', mRetryTimes=0, sTaskId=2}
11-13 22:09:02.716 5777 6697 I OtaApp###D: small task url = https://g2slave-eu-west-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
11-13 22:09:02.716 5777 6697 I OtaApp###D: small task from = 556178300; to = 834267449
11-13 22:09:02.716 5777 6697 I OtaApp###D: small task sTask.getFrom() = 556178300 ;sTask.getCurrentBytes() = 0 ;sTask.getTotalBytes() = 278089150
11-13 22:09:02.716 5777 6697 D OtaApp###FotaUtil: g2master-us-east.tclclouds.com getRandomUrl
11-13 22:09:02.716 5777 6693 D OtaApp###FotaUtil: g2master-ap-south.tclclouds.com getRandomUrl
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task: SmallDownloadTask{mId='1', mPausedReason=0, mCurrentBytes=0, mTotalSize=278089150, downloadSpeed=0, status=1, mFrom=278089150, mUrl='https://g2slave-ap-north-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394', mRetryTimes=0, sTaskId=1}
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task url = https://g2slave-ap-north-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task from = 278089150; to = 556178299
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task sTask.getFrom() = 278089150 ;sTask.getCurrentBytes() = 0 ;sTask.getTotalBytes() = 278089150
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task: SmallDownloadTask{mId='0', mPausedReason=0, mCurrentBytes=0, mTotalSize=278089150, downloadSpeed=0, status=1, mFrom=0, mUrl='https://g2slave-ap-south-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394', mRetryTimes=0, sTaskId=0}
11-13 22:09:02.717 5777 6696 D OtaApp###FotaUtil: g2master-us-west.tclclouds.com getRandomUrl
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task url = https://g2slave-ap-south-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task from = 0; to = 278089149
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task sTask.getFrom() = 0 ;sTask.getCurrentBytes() = 0 ;sTask.getTotalBytes() = 278089150
Download incremental firmware here
o.class.jav said:
FYI- if it helps in development (if anyone else is trying to crack root and bootloader for tcl devices- they do not release thier firmware to the public... but the do over the air (which is logged ) Pasting the bits from the 1millions lines of log- where the link to the firmware was generated- I downloaded the file and will share on random platform here shortly. Im not sure how long the random links will last though.
https://g2slave-ap-north-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
1-13 22:09:02.715 5777 6697 I OtaApp###D: small task: SmallDownloadTask{mId='2', mPausedReason=0, mCurrentBytes=0, mTotalSize=278089150, downloadSpeed=0, status=1, mFrom=556178300, mUrl='https://g2slave-eu-west-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394', mRetryTimes=0, sTaskId=2}
11-13 22:09:02.716 5777 6697 I OtaApp###D: small task url = https://g2slave-eu-west-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
11-13 22:09:02.716 5777 6697 I OtaApp###D: small task from = 556178300; to = 834267449
11-13 22:09:02.716 5777 6697 I OtaApp###D: small task sTask.getFrom() = 556178300 ;sTask.getCurrentBytes() = 0 ;sTask.getTotalBytes() = 278089150
11-13 22:09:02.716 5777 6697 D OtaApp###FotaUtil: g2master-us-east.tclclouds.com getRandomUrl
11-13 22:09:02.716 5777 6693 D OtaApp###FotaUtil: g2master-ap-south.tclclouds.com getRandomUrl
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task: SmallDownloadTask{mId='1', mPausedReason=0, mCurrentBytes=0, mTotalSize=278089150, downloadSpeed=0, status=1, mFrom=278089150, mUrl='https://g2slave-ap-north-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394', mRetryTimes=0, sTaskId=1}
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task url = https://g2slave-ap-north-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task from = 278089150; to = 556178299
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task sTask.getFrom() = 278089150 ;sTask.getCurrentBytes() = 0 ;sTask.getTotalBytes() = 278089150
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task: SmallDownloadTask{mId='0', mPausedReason=0, mCurrentBytes=0, mTotalSize=278089150, downloadSpeed=0, status=1, mFrom=0, mUrl='https://g2slave-ap-south-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394', mRetryTimes=0, sTaskId=0}
11-13 22:09:02.717 5777 6696 D OtaApp###FotaUtil: g2master-us-west.tclclouds.com getRandomUrl
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task url = https://g2slave-ap-south-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task from = 0; to = 278089149
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task sTask.getFrom() = 0 ;sTask.getCurrentBytes() = 0 ;sTask.getTotalBytes() = 278089150
Click to expand...
Click to collapse
DOWNLOAD INCRIMENTAL FW HERE
@o.class.jav
I've changed the prefix of your thread from "Development" to "General" as only own development qualifies for that prefix. Please do not change it back! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
o.class.jav said:
DOWNLOAD INCRIMENTAL FW HERE
Click to expand...
Click to collapse
hello,my tcl20pro still not working,do you have any rom of it.
I have tried the rom of the guide you wrote.
but it said that it's corrupt.
MU.Eu said:
hello,my tcl20pro still not working,do you have any rom of it.
I have tried the rom of the guide you wrote.
but it said that it's corrupt.
Click to expand...
Click to collapse
I do- I still have all of the tools, ROM's ect- its around 12gb of data though- give me a day and ill get it all uploaded again
https://imgur.com/Qpkixcb
https://imgur.com/qgsPnB9
Let me know if these are the files you need.
thank
o.class.jav said:
I do- I still have all of the tools, ROM's ect- its around 12gb of data though- give me a day and ill get it all uploaded again
https://imgur.com/Qpkixcb
https://imgur.com/qgsPnB9
Let me know if these are the files you nee
o.class.jav said:
I do- I still have all of the tools, ROM's ect- its around 12gb of data though- give me a day and ill get it all uploaded again
https://imgur.com/Qpkixcb
https://imgur.com/qgsPnB9
Let me know if these are the files you need.
Click to expand...
Click to collapse
thank you
Click to expand...
Click to collapse
thank you. i tried these two roms and they were uploaded in another of your articles. But after I flashed it, I found that it would prompt an error
I flashed it according to the tutorial you wrote, and the flashing process is normal, but after flashing the rom, the phone shows such an error after restarting
and，my phone's version is 810h, a Hong Kong version
thanks！
MU.Eu said:
thank
thank you. i tried these two roms and they were uploaded in another of your articles. But after I flashed it, I found that it would prompt an error
Click to expand...
Click to collapse
by the way the links in this post still work and are direct backdoors into TCL distro for firmware
MU.Eu said:
hello,my tcl20pro still not working,do you have any rom of it.
I have tried the rom of the guide you wrote.
but it said that it's corrupt.
Click to expand...
Click to collapse
The rom was for T801S
o.class.jav said:
DOWNLOAD INCRIMENTAL FW HERE
Click to expand...
Click to collapse
Thank you very much! The Google Drive link is down, perhaps upload to soureforge or the Internet Wayback machine, they are generally more tolerant of this stuff. I was wondering if we could patch the boot.img with magisk and gain root but not if we don't have the unlock fastboot command.
o.class.jav said:
DOWNLOAD INCRIMENTAL FW HERE
Click to expand...
Click to collapse
File does not exist.
o.class.jav said:
FYI- if it helps in development (if anyone else is trying to crack root and bootloader for tcl devices- they do not release thier firmware to the public... but the do over the air (which is logged ) Pasting the bits from the 1millions lines of log- where the link to the firmware was generated- I downloaded the file and will share on random platform here shortly. Im not sure how long the random links will last though.
https://g2slave-ap-north-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
1-13 22:09:02.715 5777 6697 I OtaApp###D: small task: SmallDownloadTask{mId='2', mPausedReason=0, mCurrentBytes=0, mTotalSize=278089150, downloadSpeed=0, status=1, mFrom=556178300, mUrl='https://g2slave-eu-west-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394', mRetryTimes=0, sTaskId=2}
11-13 22:09:02.716 5777 6697 I OtaApp###D: small task url = https://g2slave-eu-west-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
11-13 22:09:02.716 5777 6697 I OtaApp###D: small task from = 556178300; to = 834267449
11-13 22:09:02.716 5777 6697 I OtaApp###D: small task sTask.getFrom() = 556178300 ;sTask.getCurrentBytes() = 0 ;sTask.getTotalBytes() = 278089150
11-13 22:09:02.716 5777 6697 D OtaApp###FotaUtil: g2master-us-east.tclclouds.com getRandomUrl
11-13 22:09:02.716 5777 6693 D OtaApp###FotaUtil: g2master-ap-south.tclclouds.com getRandomUrl
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task: SmallDownloadTask{mId='1', mPausedReason=0, mCurrentBytes=0, mTotalSize=278089150, downloadSpeed=0, status=1, mFrom=278089150, mUrl='https://g2slave-ap-north-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394', mRetryTimes=0, sTaskId=1}
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task url = https://g2slave-ap-north-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task from = 278089150; to = 556178299
11-13 22:09:02.717 5777 6696 I OtaApp###D: small task sTask.getFrom() = 278089150 ;sTask.getCurrentBytes() = 0 ;sTask.getTotalBytes() = 278089150
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task: SmallDownloadTask{mId='0', mPausedReason=0, mCurrentBytes=0, mTotalSize=278089150, downloadSpeed=0, status=1, mFrom=0, mUrl='https://g2slave-ap-south-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394', mRetryTimes=0, sTaskId=0}
11-13 22:09:02.717 5777 6696 D OtaApp###FotaUtil: g2master-us-west.tclclouds.com getRandomUrl
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task url = https://g2slave-ap-south-01.tclcom.com/36046b76899adec0492c04ad334c70b178def47a/94/698394
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task from = 0; to = 278089149
11-13 22:09:02.717 5777 6699 I OtaApp###D: small task sTask.getFrom() = 0 ;sTask.getCurrentBytes() = 0 ;sTask.getTotalBytes() = 278089150
Download incremental firmware here
Click to expand...
Click to collapse
PLEASE. Can you get the firmware fron my tcl 30 5g T7760 ..?? Thanks to reply me.
o.class.jav said:
The rom was for T801S
Click to expand...
Click to collapse
please give a link to the firmware