Develop Bugs

[Q] Percentage of well overclockable Desires?

Hi guys!
I haven't yet rooted my Desire(I would have but I was fool enough to install the 2.2 OTA).The main reason for me to root would be the ability to overclock my device.All this time that I have been around here on the Desire and Nexus One forums I have been seeing that our devices are overclocked only up to 1113MHz and only in very rare cases 1267MHz.However,to my great surprise,I noticed on OpenDesire ROM's thread that the Desire can be overclocked @1344MHz(which of course made me think a big HELL YEAH!).Is that number ok for all of us or for some select few?I remember from my Hero days that only some few,lucky guys like myself could overclock up to 768MHz,although there were cases of people,rare,yet not unheard of,that could overclock @844MHz.Is this the case here or are things different with the Snapdragon?
Many many thanks guys!

C'mon guys,no one?

tolis626 said:
I have been seeing that our devices are overclocked only up to 1113MHz and only in very rare cases 1267MHz.
Click to expand...
Click to collapse
I don't think overclocking to 1267MHz happens in rare cases. I had no problems oc-ing to 1267 and it seems that a lot of forum member were able to do this too.
Why don't you downgrade your HBoot to 0.80, root your phone and try it out?
Just make sure your phone does not become too hot if you try 1344MHz.

I have to ask the question, but does it really matter?
IMHO, the Desire is plenty fast enough that overclocking it simply isn't necessary.
I can understand underclocking to eek out more battery life, but other than gaining a few points on some benchmarks, I really don't see the point in overclocking.
Regards,
Dave

foxmeister said:
I have to ask the question, but does it really matter?
IMHO, the Desire is plenty fast enough that overclocking it simply isn't necessary.
I can understand underclocking to eek out more battery life, but other than gaining a few points on some benchmarks, I really don't see the point in overclocking.
Regards,
Dave
Click to expand...
Click to collapse
so this, its really not needed at all. a decent fast rom and 1ghz is more than enought for things to be super speedy. any decent kernal will provide more than enough speed.
overclocking(and lots of other things these days!) reminds me of that bit in jurassic park where they are all sat around the table and geoff goldblum says:
"Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should".
herein lies the lesson, just because you can do it doesnt mean you should do it.

Well,I have my reasons wanting to overclock...First off,I will check if I can see any difference in speed or smoothness.If there isn't,I will just revert the clock back to normal after some benchmarks.
I just am the kind of guy that wants to get the most out of his phone!

I think ALL Desires can overclock to 1267Mhz. It's not that rare and I've not seen anyone having a problem with it.
It does make things a bit snappier as well.

sbdags said:
I think ALL Desires can overclock to 1267Mhz. It's not that rare and I've not seen anyone having a problem with it.
It does make things a bit snappier as well.
Click to expand...
Click to collapse
That's what I'm talkin' about man!
And now that I think of it,it's not that much.I mean,the Hero could overclock @768,which is 45% overclocking.The Desire's 1267 is about 27% and 1344 is about 34,5%.Nothing too much!So why not?

Every CPU is different. The Qualcomm Snapdragon is a very different beast compared to the Qualcomm MSM 7200A.
We are just starting to learn what we can do with the Snapdragon without damaging it.

Kinma said:
Every CPU is different. The Qualcomm Snapdragon is a very different beast compared to the Qualcomm MSM 7200A.
We are just starting to learn what we can do with the Snapdragon without damaging it.
Click to expand...
Click to collapse
Well my man,in this case the MSM7200A is no beast but rather a pooch that barks to no avail!Good pet however!
Joking aside,the Snapdragon is a beast for a mobile phone,but even beasts get beaten.Now,if I can somehow reach or even get close to the performance of the Galaxy S or the Droid X I'll be happy.Software wise I believe that HTC is far superior ,but it's hardware is a little out of date.Let's see what their new devices will do for us!
Btw,does anyone know if the so anticipated HTC Ace will be anything better than what we already have or if it will be the Evo for GSM users?
Thanks!

The desire is plenty fast as it is and I don't see the point of overclocking it. I've had it to 1267 in the past and it made no difference at all for usability. I'm also the type that overclocks all his computers...
Sent from my HTC Desire using Tapatalk

Personal preferences dude...What everyone does with their phone is their own business.I wish I could resist overclocking too!
However,I was watching a thread over at the N1 forums in which a dude named Storm9999(genius dude,not just a random one) stated that an overclock @1,3GHz could fry our phones.Is that so?I mean,I know overclocking reduces the CPU's lifetime,but is it THAT MUCH dangerous?

I think overclocking can kill your phone.. I use to overclock my own o2 orbit and it died after a year..

Friend of mine just burned his old HTC by overclocking it and as a consequence is going to buy a desire.
I had my phone overclocked at 1345Mhz for a moment, just to test it, and it made no real difference to when it was overclocked at around 1.2Ghz, which in turn has very very little difference to stock 1Ghz.
I think the only case where you see some small impact is in games.
I've tested HD recording at 1.345 Ghz and stock speed and there was no difference.
If anything, it's going to kill your battery and shorten its life for sure, going so high. If ever I will OC again I won't go over 1.1 and only if I find some tangible improvements.
As said, this phone is always fast, there is no real need to OC, other than for 'fun'.

The fun is what I want...Well,most probably I will have my phone overclocked at the maximum speed it can get for about a week or two and then go back to 1 or 1,1GHz...
Btw,your signature kicks ass andycted!

2.0 Ghz kernel

Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.

dietotherhythm said:
Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.
Click to expand...
Click to collapse
Why do you need to overclock that high? I've used the 1.8Ghz and found that to.be overkill. I'm running at about 1ghz at that seems ample.
Sent from my CM7 powered Desire Z

cjward23 said:
Why do you need to overclock that high? I've used the 1.8Ghz and found that to.be overkill. I'm running at about 1ghz at that seems ample.
Sent from my CM7 powered Desire Z
Click to expand...
Click to collapse
+1
Wouldn't that fry your phone without any active cooling system or something? Sounds unnecessarily risky..

dietotherhythm said:
Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.
Click to expand...
Click to collapse
You don't need a VM. You need to wipe the garbage off and install linux on the "bare metal".

While it would be *neat* to oc this phone to 2GHz - just because. It would be beyond useless and I can just see some noob burning down their parents house or possibly starting a nuclear war with Russia by accident. Lets not forget your carrier reporting you to the CIA for having a nuclear reactor in your phone.
Look, with no active cooling it's just downright stupid to go that high. However being the genius' that we are I'm sure somebody could devise a method to install a mini fan or some liquid cooling on this phone. But then you may need that nuclear reactor to power all that stuff. Haven't we already set a guiness world record at 1.8GHz on a production phone anyway? Maybe we need to tell them so we can make it in the book

My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds

MacaronyMax said:
My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds
Click to expand...
Click to collapse
LOL, it didn't make you go back in time or some ****?

The 1.9Ghz kernel caused my phone to crash. 2.0 would burn your phone's processor out. Just use the 1.8Ghz kernel and have the profiles on SetCPU set to the lowest speeds when the display's off.

Your phone may not actually run stable at 2GHz. Mine doesn't run stable past 1.6GHz, and that runs psx4droid *perfectly*, especially with the optimization they've done in the app recently.
Also, even with setCPU profiles, battery drain when you ARE running that high is a beeeotch.

Honestly, it's not really for OCing that high, but rather the look at what I can do I had a friend just ask be how high I can OC my phone and at 1.5GHz he's like woah :O His face at 2GHz would have been like

I previously used Flippy's kernel on my G2 and did OC it to 1.8 GHz, and got a Quadrant score of 3037. It was cool to see how fast my phone could actually get, but I'm more than comfortable with OC'ing it to 1.4 GHz. Anything more than that seems to be unnecessary to me, but that's just my opinion. Last thing I want is to have my G2 melt while it's in the pocket of my pants.

Try the .ko module and overclock that way
Sent from my HTC Vision using XDA App

mejorguille said:
Try the .ko module and overclock that way
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Oh yeah totally forgot that existed. Thank you for the useful response.

tried the module but the phone freezes after doing anything above 1.4ghz
I believe it needs voltage tweaking which I don't know how to go about sooo... yeah

MacaronyMax said:
My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds
Click to expand...
Click to collapse
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!

EdWRX said:
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!
Click to expand...
Click to collapse
Nope, not for me anyway. I know different HW revisions and such have an effect on how high you can oc but my phone doesn't skip a beat at 1.8GHZ. I'm sure I could go to 2GHZ or a bit higher but unless I'm trying to emulate a PS3, I don't see the purpose - aside from maybe setting a record.

KCRic said:
Nope, not for me anyway. I know different HW revisions and such have an effect on how high you can oc but my phone doesn't skip a beat at 1.8GHZ. I'm sure I could go to 2GHZ or a bit higher but unless I'm trying to emulate a PS3, I don't see the purpose - aside from maybe setting a record.
Click to expand...
Click to collapse
Same. I can do 1.8 all day if I keep near a charger. Anything over 1.3 will drain my battery like a monster though.
I keep at 1.2 regularly and only go higher for games.
Sent from my HTC Vision using XDA App

EdWRX said:
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!
Click to expand...
Click to collapse
I can jog 1.8 and 1.9Ghz for a day without even reaching a dangerous temperature.
Can I get some supportive ideas and less herp derp personal opinions?

Highest Ive pushed mine is 1.5ghz. No need to go any further, Im satisfied with the performance. I get a full days battery life and the temperatures never get critical (my setcpu profile is set to underclock at 38.2 degrees Celcius but my G2 hasn't gotten close to that). Im curious at what stage my G2 would score 3000+ in Quadrant.

You might PM flippy and see if he will customize a kernel for you that goes that high. Let him know you will send a certified letter signed in blood and a video of you stating you release him of all liability for what ever town you destroy when your phone goes nuclear.
Seriously though, I'm willing to be he'll make it for kicks if you ask nicely - btw, call guiness so you can make it into the record books. Also, I'm not sure but if you flash a 'blank' kernel couldn't you just echo the speed and voltage in the 00banner file or whichever one it is?

[Q] Overclocking the Evo past 1.19

So, Im sure this was answered somewhere, and I searched all over.
With that said, why cant the Evo be overclocked past the standard 1.19 or 1.2? I know stability is an issue, but there are other ARM processors that can OC almost double. Is the Evo ARM processor just not able to handle anything past that?
Does anyone know?
Thank you for the insite

You cannot compare the processor in teh Evo to other similar processors. Every single processor is different, and overclocking the evo past those speeds could brick it.

Why would you want to overclock that far? The Evo has no ventilation and crappy power management, even with an extended battery. You're taking an already unstable system and pushing it to the edge. Not only will your phone overheat and freeze, but you can permanently damage the hardware.

I know every processor is different and each one has their own limits.
There is always a risk of bricking and damaging the actual hardware, but what im asking is, in theory, and a practical test, can you push the evo processor past the 1.19 that seems to be the limit (im not talking about going huge, but is there a possibility of being able to hit the 1.5Ghz?). Because there are certain frequencies that are not stable, but ones slightly past that could be stable.
Just throwing it out there.

A car traveling at 120 MPH is not as easy to control as a car doing the speed limit.

try it out n see what happens n then report back ur findings for others that have the same question and cannot find an answer anywhere

Product F(RED) said:
A car traveling at 120 MPH is not as easy to control as a car doing the speed limit.
Click to expand...
Click to collapse
good analogy but that doesnt help anything.
{ParanoiA} said:
try it out n see what happens n then report back ur findings for others that have the same question and cannot find an answer anywhere
Click to expand...
Click to collapse
I would, but all the kernels that the Devs have developed have either a limit put on them, or they havent been able to allow it to OC that far

shagav said:
good analogy but that doesnt help anything.
I would, but all the kernels that the Devs have developed have either a limit put on them, or they havent been able to allow it to OC that far
Click to expand...
Click to collapse
I was wondering this too. It would be nice to have the option to push it over 1.19ghz, I'll be the test dummy.

My Evo can handle 1228 fairly well but can tell its not as stable as say 1190. 1190 MHz is no prob...1267 usually crashes after a run or 3 in quadrant. 1113 runs niiiice for me and my 0004 evo

stkiswr said:
My Evo can handle 1228 fairly well but can tell its not as stable as say 1190. 1190 MHz is no prob...1267 usually crashes after a run or 3 in quadrant. 1113 runs niiiice for me and my 0004 evo
Click to expand...
Click to collapse
I can run 1190 just fine. Can a Dev possibly create a kernel that allows us to go past 1.2whatever.

I can't go up to 1.19 stabley
Gimme a couple a days to come up with a new sig that is cool.

if I pass 1190 endless bootloop.... then ya gotta be fast and turn that damn thing down

I can go to 1228 MHz with Tiamat but it will crash and reboot once you do a couple of things.

shagav said:
So, Im sure this was answered somewhere, and I searched all over.
With that said, why cant the Evo be overclocked past the standard 1.19 or 1.2? I know stability is an issue, but there are other ARM processors that can OC almost double. Is the Evo ARM processor just not able to handle anything past that?
Does anyone know?
Thank you for the insite
Click to expand...
Click to collapse
despite the meriad of answers you have gotten, I have been running my Evo on Sprint lovers Rom, and KiNgxKernel-Evo-12-BFS357-2.6.32.25-Flashable.zip for kernal.
I have been overclocked at 1267 since the day the kernal came out. it is singularly the only kernal that has allowed me to do this without ever crashing. OH, and I'm using
SetCPU 1267 on both min and max and scaling set to performance.

shagav said:
I know every processor is different and each one has their own limits.
There is always a risk of bricking and damaging the actual hardware, but what im asking is, in theory, and a practical test, can you push the evo processor past the 1.19 that seems to be the limit (im not talking about going huge, but is there a possibility of being able to hit the 1.5Ghz?). Because there are certain frequencies that are not stable, but ones slightly past that could be stable.
Just throwing it out there.
Click to expand...
Click to collapse
Not going too big? Going from 1.0 ghz to 1.5ghz on a phone is like going from a civic to a v8. Alot of computer cpu's dont even overclock 500 mhz. I think you're expecting a little too much from a phone. If you want more, go buy a dual-core cpu atrix 4g or something. I'm a speed freak myself when it comes to cpu overclocking (mainly on computers) but 1.113 is plenty for a phone. It even runs fine at 600mhz. Dont get me wrong, it would be cool to get it that high, but your phone would hate you lol

Overclocking
Just flashed Netflix-AllianceROM-2.1-HybriD-3D-OTA-Themed-r7.3TCsigned.zip and was wondering if there is a safe compatible overclocking kernel. Anyone have an idea?

kdogg530 said:
Just flashed Netflix-AllianceROM-2.1-HybriD-3D-OTA-Themed-r7.3TCsigned.zip and was wondering if there is a safe compatible overclocking kernel. Anyone have an idea?
Click to expand...
Click to collapse
There are tons of kernals available in the Dev forum. I personally recommend Netarchy's kernals, but you are free to try any of them.

kdogg530 said:
Just flashed Netflix-AllianceROM-2.1-HybriD-3D-OTA-Themed-r7.3TCsigned.zip and was wondering if there is a safe compatible overclocking kernel. Anyone have an idea?
Click to expand...
Click to collapse
Until HTC drops source codes you will lose camera and other things.

How did you overclock the CPU? I have tried the setCPU and it does not work, I have my Phone rooted, installed the crazy UNleashed rom (since uninstalled) and could not get the setCPU to overclock. Even though UNleashed is made to do that, and I have read others getting over clocked. I am running Synergy now, which I do not think it can Overclock the EVO, but I would like to know how you fine folks are accomplishing this. I would love to go 1.1 right now.

AmericanAlien said:
How did you overclock the CPU? I have tried the setCPU and it does not work, I have my Phone rooted, installed the crazy UNleashed rom (since uninstalled) and could not get the setCPU to overclock. Even though UNleashed is made to do that, and I have read others getting over clocked. I am running Synergy now, which I do not think it can Overclock the EVO, but I would like to know how you fine folks are accomplishing this. I would love to go 1.1 right now.
Click to expand...
Click to collapse
If you're using a stock HTC kernel, hit menu inside SetCPU -> Perflock Disabler. Disable Perflock -> Set On Boot. Ta da.

So is it just my epic?

So no matter what rom i load on my phone i get the same thing.... it will not wake up and i have to remove the battery. Now on stock its fine! but any rom.. and yes i have tried them.. numerous times.. Right now i have AOSP genocide 2 and its working the best. I can go 4 or 5 hours before i need to do a battery pull (sometimes). This morning i have had to do i battery pull twice but now it seems to be fine.
Now its not over clocking that is doing it. I have been all through that. My phone blazes when at 1.3ghz but will not turn back on ever with out a battery pull. right now there is no overclocking and voltage control is denied root. This seems to be working the best.
I really want something besides the stock rom. mainly because my phone is snappier and the battery life is wayyyyyyy better. So is it just my phone? Should i bring it into sprint and get a new epic?

NissanNick said:
So no matter what rom i load on my phone i get the same thing.... it will not wake up and i have to remove the battery. Now on stock its fine! but any rom.. and yes i have tried them.. numerous times.. Right now i have AOSP genocide 2 and its working the best. I can go 4 or 5 hours before i need to do a battery pull (sometimes). This morning i have had to do i battery pull twice but now it seems to be fine.
Now its not over clocking that is doing it. I have been all through that. My phone blazes when at 1.3ghz but will not turn back on ever with out a battery pull. right now there is no overclocking and voltage control is denied root. This seems to be working the best.
I really want something besides the stock rom. mainly because my phone is snappier and the battery life is wayyyyyyy better. So is it just my phone? Should i bring it into sprint and get a new epic?
Click to expand...
Click to collapse
Are these freezes ONLY happening when running o/c? If so, then your hardware might not like o/c speeds. Please clarify that it is not an o/c issue due to the information you provided above.
If you're stable and having no locking issues on stock, then flash ROMS/kernels and of the bat start boosting to o/c speeds then seeing instability, how/why are you ruling out it's not a o/c or hardware limitation?
NissanNick said:
I really want something besides the stock rom. mainly because my phone is snappier and the battery life is wayyyyyyy better. So is it just my phone? Should i bring it into sprint and get a new epic?
Click to expand...
Click to collapse
I don't think sprint will swap your phone out just because you can't manage stable o/c speeds on your phone. LOL

Sounds like you need to do the classic Wipe 3X before flashing.

Sorry guys i should have been more clear. I am not a noob i always wipe 3x. It is not a O/C issue. I have gone through all the clocking and my phone just does not like it.. I can live with that. What i am saying is even when not O/C and denying all access from anything that could effect my processor the ROM's Still don't work right. They freeze even with NO O/C at all! Every one of them. So i am thinking i just got the bad end of the silicon?
Also i relies Sprint will not just exchange my phone.. But im sure i could come up with something lol.
Well i really like my epic but i am thinking of switching to the photon if i cant get the ROMS to work right. I really wanted to wait until next year to upgrade.

NissanNick said:
Sorry guys i should have been more clear. I am not a noob i always wipe 3x. It is not a O/C issue. I have gone through all the clocking and my phone just does not like it.. I can live with that. What i am saying is even when not O/C and denying all access from anything that could effect my processor the ROM's Still don't work right. They freeze even with NO O/C at all! Every one of them. So i am thinking i just got the bad end of the silicon?
Also i relies Sprint will not just exchange my phone.. But im sure i could come up with something lol.
Well i really like my epic but i am thinking of switching to the photon if i cant get the ROMS to work right. I really wanted to wait until next year to upgrade.
Click to expand...
Click to collapse
It's not the overclocking that causes your phone to go into sleep of death, it is the low end. 100 Mhz causes sleep of death on a lot of phones on a custom ROM. Set your minimum frequency to 200 Mhz and you will be fine. Don't change any of the stoick voltages.

Try using stock speeds (400-1000). Then work your way incrementally in both directions to see which frequency(ies) cause your issues. Each phone is unique, so find the sweet spot.
I get the black screen of death about twice a month running twilight 1.1.1. My phone runs 200-1000 with no undervolting and set on conservative. I'm just too lazy to bother playing with settings since I'm holding out for SRF 1.3 to release.

[Q] Has anyone gotten their D2spr device to over clock past 1.7Ghz?

As the title says, no matter what I try, I cannot push my device up to 1809Mhz or higher. Has anyone been able to? Could you drop a tip or two about what voltages I should try?

tpike1296 said:
As the title says, no matter what I try, I cannot push my device up to 1809Mhz or higher. Has anyone been able to? Could you drop a tip or two about what voltages I should try?
Click to expand...
Click to collapse
Depends on the kernel too. Some phones will be better to support higher speeds than others.

tpike1296 said:
As the title says, no matter what I try, I cannot push my device up to 1809Mhz or higher. Has anyone been able to? Could you drop a tip or two about what voltages I should try?
Click to expand...
Click to collapse
I've gone up to 2106MHz with @ktoonsez kernel using the default voltages, I was also able to undervolt too.
Edit, some differences in the manufacturing causes each phone to be different. What works with one phone might not work with another. My point: some phones can't be over clocked passed a certain point. My E4GT couldn't go pass 1.5GHz no matter what I did.
Second edit: why do you want / feel the need to overclock this phone?
Aaron Swartz, Rest in Pixels.

jamcar said:
I've gone up to 2106MHz with @ktoonsez kernel using the default voltages, I was also able to undervolt too.
Edit, some differences in the manufacturing causes each phone to be different. What works with one phone might not work with another. My point: some phones can't be over clocked passed a certain point. My E4GT couldn't go pass 1.5GHz no matter what I did.
Second edit: why do you want / feel the need to overclock this phone?
Aaron Swartz, Rest in Pixels.
Click to expand...
Click to collapse
I haven't felt the need, currently running BMS kernel-asswax gov. Superb battery life.
Sent from my hybrid GalaxyS3

joeyhdownsouth said:
I haven't felt the need, currently running BMS kernel-asswax gov. Superb battery life.
Sent from my hybrid GalaxyS3
Click to expand...
Click to collapse
I haven't either, with this phone, other than to do a benchmark and to say I could. I'm just wondering why the OP feels the needs.
Aaron Swartz, Rest in Pixels.

tpike1296 said:
As the title says, no matter what I try, I cannot push my device up to 1809Mhz or higher. Has anyone been able to? Could you drop a tip or two about what voltages I should try?
Click to expand...
Click to collapse
You could try raising your voltages alittle
Sent from my SPH-L710 using xda premium

If you are in TW, search ziggy's in Google.
infected with the unspeakable

Yeah, I suggest you look up "CPU binning" and see what you have as not all processors can handle the same things, and you can seriously damage your phone by overclocking too high or something similar.

jamcar said:
I've gone up to 2106MHz with @ktoonsez kernel using the default voltages, I was also able to undervolt too.
Edit, some differences in the manufacturing causes each phone to be different. What works with one phone might not work with another. My point: some phones can't be over clocked passed a certain point. My E4GT couldn't go pass 1.5GHz no matter what I did.
Second edit: why do you want / feel the need to overclock this phone?
Aaron Swartz, Rest in Pixels.
Click to expand...
Click to collapse
The only real reason I wanted to overclock was to say that I could (and do some benchmarks). Curiosity, mainly. I've since realized that even going to 1728Mhz has proven fairly useless except if I want to reduce battery life, or get a *tiny* boost when emulating the N64. Thank you for the explanation of why it most likely wouldn't work. Seems I always get devices that don't really like overclocking, as my HTC EVO 4G didn't seem to like more than a tiny boost, either.