Would there be anything wrong with flashing a custom ROM while you are in an area with no signal?
I do have access to wireless internet. So the DINC could connect that way.
Should work fine, I've done it myself.
Note that the google setup and market may not perform as always, but flashing w/ no signal is fine. Also remember that since you have no signal, you won't know whether the device functions better/worse as a phone - after flashing the custom in an area w/ no signal.
Nandroid before you flash...
smtom said:
Should work fine, I've done it myself.
Note that the google setup and market may not perform as always, but flashing w/ no signal is fine. Also remember that since you have no signal, you won't know whether the device functions better/worse as a phone - after flashing the custom in an area w/ no signal.
Nandroid before you flash...
Click to expand...
Click to collapse
Yes I did a Nandriod already and also a Titanium backup also. Thanks for the info.
Related
So my friend rooted his Evo with Unrevoked. I verified s-off.
He copied a PC36IMG onto his SD which turns out was some 2.1 rooted stock ROM. After doing that his phone could not make/receive calls/text or connect to 1x/3G/4G. Basically an expensive phone that has no phone functions. Everything else works (WiFi included). He flashed http://link.geekfor.me/rootedromzip onto his phone from http://forum.androidcentral.com/htc...vo-install-clockwork-recovery.html#post165998.
When I looked at it, he still did not have a custom recovery so I flashed Amon RA PC36IMG. Full factory wiped data/cache/dvalik. Flashed Synergy RC1. Phone still could not make/receive calls and was getting Error 16 when trying to call. Called Sprint and they reprovisioned phone and fixed calls and texting. Noticed his phone is stuck on 1x and cannot connect to 3G when my phone next to his works fine. Did not test 4G yet since I have poor 4G coverage in my area. Cannot update his profile - just sits there like something is happening but it never completes.
What are his options here? Is it a bad radio or something that we can fix? Can we flash a stock rooted ROM and regain 3G? Remember, no nandroid was made unfortunately.
I would try flashing the latest radios just to be sure. And tell your friend to always make a nandroid backup to avoid this problem in the future.
Well his first time flashing. I think he mistakenly thought the PC36IMG as a custom recovery but it was actually an entire ROM.
Didn't have a chance to nandroid. I'm instructing him how to update newest radio combo and seeing what happens.
Update: Flashed latest combo radio. Updated profile and PRL. Still stuck on 1x even after reboot. Is he hosed? Does Sprint have to do something on their end to fix his EVDO? 4G isn't working either by the way.
Update 2: Wimax Keys Checker - https://market.android.com/details?id=com.joeykrim.wimaxkeys says that RSA Key is present. Relieved that he didn't lose his RSA key. Just can't figure for the life of me why he can't connect to 3G or 4G. Not sure where to go from here? Maybe trying to flashing latest stock rooted RUU? http://forum.xda-developers.com/showthread.php?t=1110733
Bumping for some attention.
Hey, happened to me a couple of times, it will come back. Maybe wipe everything again, have you tried ##data# and entering msl key, wait... Have you updated his data profile in settings
Sent from my PC36100 using XDA Premium App
Hello.....did that work for ya?
Sent from my PC36100 using XDA Premium App
Ok, was on the road when I had wife reply...lol.. When you rebooted the phone,did you wipe cache,and dalvik. Then try updating profile? It sounds weird,but has worked for me,without even updating profile. I have had no coverage before after flashing a Rom,also,did just that,and it came back. If rsa keys are present,that is good. If you would be kind enough to reply,whether fixed or not,would appreciate it,anyway,gonna move on...
Sent from my PC36100 using XDA Premium App
Cares said:
So my friend rooted his Evo with Unrevoked. I verified s-off.
What are his options here? Is it a bad radio or something that we can fix? Can we flash a stock rooted ROM and regain 3G? Remember, no nandroid was made unfortunately.
Click to expand...
Click to collapse
Did he try updating his profile & prl
Sent from my criffvo
Updating profile and PRL doesn't work. It keeps attempting to update but it is never successful.
I haven't had a chance to get his phone to just try reflashing a new ROM or stock ROM to see what will happen though.
He says using ##data# and entering his MSL code and changing EVDO to automatic doesn't work either.
Cares said:
Updating profile and PRL doesn't work. It keeps attempting to update but it is never successful.
I haven't had a chance to get his phone to just try reflashing a new ROM or stock ROM to see what will happen though.
He says using ##data# and entering his MSL code and changing EVDO to automatic doesn't work either.
Click to expand...
Click to collapse
I would start over again ... wipe completely with Calkulin's "fomat all" zip and flash a rooted stock rom like xhausx. Once the phone boots up, call Sprint and have them walk you through provisioning everything. Once all is well, then move into whatever custom stuff he wants.
wmdunn said:
I would start over again ... wipe completely with Calkulin's "fomat all" zip and flash a rooted stock rom like xhausx. Once the phone boots up, call Sprint and have them walk you through provisioning everything. Once all is well, then move into whatever custom stuff he wants.
Click to expand...
Click to collapse
You took the words from my mouth!
Is he Flashing the RUU's or just running them through the computer? Normally, you sync your phone or through hBoot and then start the program, try flashing stock Froyo and then factory reset once flashed, it helps clear out traces of old roms etc. If you need anymore help feel free to ask, I would be more than happy!
I don't think it worked.
Calkulin's Format, flashed Odexed http://forum.xda-developers.com/showthread.php?t=1133379.
It showed 3G but I think it was misleading. Wiped and flashed to evodeck and it went back to showing 1x. My phone has 3G showing on evodeck next to his so he definitely has 3G coverage.
I guess it's just time to call Sprint for a re-provision? Does it have to be on a Sense ROM for them to reprovision?
Cares said:
I don't think it worked.
Calkulin's Format, flashed Odexed http://forum.xda-developers.com/showthread.php?t=1133379.
It showed 3G but I think it was misleading. Wiped and flashed to evodeck and it went back to showing 1x. My phone has 3G showing on evodeck next to his so he definitely has 3G coverage.
I guess it's just time to call Sprint for a re-provision? Does it have to be on a Sense ROM for them to reprovision?
Click to expand...
Click to collapse
you dont need Sprint to provision, just get your MSL code and do it your self plus I would do a search for people who may of had similar issues and see what they did. Now if that does not work then why dont you check what your network settings are.. See if its set to CDMA(Auto) I remember my Touch Pro I could of set it to 1x maybe something is getting stuck. I think its in ##3282 you check it and I also remember an app on the market called network that did it for you as well.
If that does not work then flash 3.70 radios and then a 3.70RUU and start from scratch.
He already tried ##data#. He can change his EVDO to automatic but it doesn't stay that way.
Alright I don't know how I fixed it but it's fixed.
Just cannot get 4G now. Wimax keys are present. It keeps scanning and cannot get connect. Previously could get 4G at these locations.
I am running EVO as donor/target phone, my is only 1x speed, no matter which rom I try
Synergery, Mik, Stock-Rooted, differ kernal, different PRL, check the data profile Automatic, Try restore but can not cat automatically update, still need to go qpst to update my profile. I have been working on this for two weeks. I went back to my orig phone, it show ev most of time, the speed is must faster than my evo. Searc all over from goole, still no luck, Anyone any idea to try
sitlet said:
I would try flashing the latest radios just to be sure. And tell your friend to always make a nandroid backup to avoid this problem in the future.
Click to expand...
Click to collapse
+1
i know this post is somewhat old. but Making a back up wont take hardly and extra time! always always make one unless you have 100% reliable roms already backed up.
I am having problems getting my 4g to work correctly. I am rooted, running synergy RLS1 + godmode. I have checked my RSA keys, which are still in good condition, my mac address is still in tact, and I have the latest radio/pri/wimax/prl etc radios. I have tried updating profile after everything and still cannot get 4g to function where I know it works. Any other suggestions?
Have you tried making a nandroid backup of your current setup then flashing a stock rom (or restoring your stock backup, if you have one) and testing 4g again?
It could be a rom related issue - I've heard great things about Synergy, but haven't been on Sense for months, so I'm not familiar with the rom. If you're positive that your wimax is intact & you still can't connect, call Sprint & see if it's something on their end.
Sent from my PC36100 using Tapatalk
I will try that next. I have a nand backup made already but I am not always in an area where 4g is accessible. I should be this weekend so I will give that a shot.
Thanks!
well i'm on synergy as well and my 4g works i have an evo 4g on metropcs and i use clear internet (had to get my phone macid added as an additional device on my clear account) on my phone for 4g works just fine
Before I start let me explain I've searched for the answer to this and have yet to find any concrete answers. I've had my Verizon G'Nex since release and had it rooted before Best Buy had even run my credit card. I've been running SlimKat 4.4.2 Build 5 official and CWM Touch. Ever since I updated the ROM (clean flash) to the 4.4.4 experimental I've had problems with both 3G and LTE connecting to data. I have signal, in some cases "4 bars" worth, but it never actually connects to data unless I reboot the phone - that will last for a couple hours to a couple days then it's back to no data. I completely wiped the phone - data, cache, system, and sdcard...everything that CWM could possibly let you wipe - and then sideloaded the previously stated Slimkat which worked for months prior without issue. The problem still persists, and has gotten worse. I cannot use LTE at all. It will not connect regardless of what I do.
So my question here is what parts of Android affect data connection? Is this entirely ROM dependent, or does kernel have something to do with it? I'd rather not go through the trouble of finding another ROM that has speed and features of SlimKat, or randomly flashing kernels just to find it doing the same thing.
UTMorpheus said:
Before I start let me explain I've searched for the answer to this and have yet to find any concrete answers. I've had my Verizon G'Nex since release and had it rooted before Best Buy had even run my credit card. I've been running SlimKat 4.4.2 Build 5 official and CWM Touch. Ever since I updated the ROM (clean flash) to the 4.4.4 experimental I've had problems with both 3G and LTE connecting to data. I have signal, in some cases "4 bars" worth, but it never actually connects to data unless I reboot the phone - that will last for a couple hours to a couple days then it's back to no data. I completely wiped the phone - data, cache, system, and sdcard...everything that CWM could possibly let you wipe - and then sideloaded the previously stated Slimkat which worked for months prior without issue. The problem still persists, and has gotten worse. I cannot use LTE at all. It will not connect regardless of what I do.
So my question here is what parts of Android affect data connection? Is this entirely ROM dependent, or does kernel have something to do with it? I'd rather not go through the trouble of finding another ROM that has speed and features of SlimKat, or randomly flashing kernels just to find it doing the same thing.
Click to expand...
Click to collapse
Well in not sure about this option being in your version of cwm.
However if it has wipe efs data as an option and you wiped it nothing that you do to try and fix your connections will work.
I found this out the hard way and had to buy a new gnex. Tried everything but couldn't get my efs data back.
DR3W5K1 said:
Well in not sure about this option being in your version of cwm.
However if it has wipe efs data as an option and you wiped it nothing that you do to try and fix your connections will work.
I found this out the hard way and had to buy a new gnex. Tried everything but couldn't get my efs data back.
Click to expand...
Click to collapse
No option about EFS. That's the thing that bothers me. I have voice and text, it can 'see' towers, it appears to be able to 'connect' to towers, but it's like it's not pulling an IP address or it can't contact DNS.
First, I've had this issue since Build 6.8. I was hoping a Clean Install using Philz Touch Recovery v6.48.4, which is the latest, and selected Wipe Data and select Clean to install new ROM which Formats /data, /cache, /system. I also wiped Dalvik.
Once completed I did the following:
Clean Install of Slim-d2lte-4.4.4.build.7.0-OFFICIAL-5979
I then installed
Slim_full_gapps.BETA.4.4.4.build.7.x-190
Rebooted and waited for SlimKat to boot-up. WiFi/Data both full scale. Everything Restored just fine and things are running smooth.
Then after running a few errands outside of WiFi Range, I returned home within WiFi range only to find out that WiFi had not reconnected. It tells a WiFi connection is available but will not reconnect to it. So I go into Setting and select WiFi and tried to manually reconnect. It says connecting and then goes back to Saved Connection without connecting. This same thing on other WiFi connections such as McDonald's or other open WiFi Connections.
I then do a re-boot and everything is back to normal. WiFi connects without issue and again things are fine and running smooth.
Every time I leave WiFi range and then return within WiFi range, the problem re-occurs. A Re-Boot and everything back to normal.
One thing I've always noticed when doing a Clean Install as stated above, all of my previously stored WiFi connection are still there. Same on Ringtone/Notification Tones.
With the problem I'm having, could it be something that is not being wiped/cleared out during the Clean Install process. Or wondering if it could be somehow that the WiFi Radio has gotten corrupted.
I have also tried different Kernels but again the result is the same.
Hope this is not too much of a noob question and I have searched about everything I can think of. Wondering if anyone has had this problem or have any ideas of what could cause the problem.
I really hope I can get this figured out. Thanks
If you don't have to manually reconnect and enter your password, then its not being wiped. (Or you are restoring it from a backup.) Have you tested it after the clean flash, but before restoring anything? What are you restoring and how?
It sounds like a Rom issue otherwise and you should probably ask in the rom thread.
DocHoliday77 said:
If you don't have to manually reconnect and enter your password, then its not being wiped. (Or you are restoring it from a backup.) Have you tested it after the clean flash, but before restoring anything? What are you restoring and how?
It sounds like a Rom issue otherwise and you should probably ask in the rom thread.
Click to expand...
Click to collapse
First I don't know what I've missed wiping. When I say restoring, I'm referring to letting Google re-downloading everything from the Play Store.
I know the WiFi radio are in a different location but like you, when I do a Clean Install by formatting /data /cache /system and wiping dalvik, I wasn't expecting all the stored WiFi connections to still be there, but they are.
Its possible its being restored by Google's backup, but I don't use it myself so I'm not certain about that. Its also possible the rom may save the config file elsewhere. Again though, I don't use cm/aosp based roms so I'm not too familiar with any of their specifics.
Next time you try a clean flash, do not sign into google during setup. Instead go straight to testing wifi to see if it still remembers the connections. Do you have it set to auto connect to any open networks? If so you might want to turn that off.
Have you searched or asked in the roms thread yet? It might be a known issue or something a few others have encountered and know how to fix.
DocHoliday77 said:
Its possible its being restored by Google's backup, but I don't use it myself so I'm not certain about that. Its also possible the rom may save the config file elsewhere. Again though, I don't use cm/aosp based roms so I'm not too familiar with any of their specifics.
Next time you try a clean flash, do not sign into google during setup. Instead go straight to testing wifi to see if it still remembers the connections. Do you have it set to auto connect to any open networks? If so you might want to turn that off.
Have you searched or asked in the roms thread yet? It might be a known issue or something a few others have encountered and know how to fix.
Click to expand...
Click to collapse
Ya I don't sign into Google at the initial start up after the flash because my WiFi is no able to connect. I will double check the auto connect feature. But I having this issue with other 4.4.4 ROMs also because I tired however on those ones I am amvle to toggle WiFi on but in advanced it has the region set to Europe and when I switch it to Canada it doesn't want to save the change
I've got the T-Mobile M919 S4 and I have a 4.4.4 ROM on it (Insane Hybrid).
I've got the latest NK2 Baseband and I also don't want to upgrade to Lollipop since I did before and it was lag lag lag lag lag after a week or so.
I've noticed recently that it is getting very poor reception.
My buddy's S3 will have two bars and mine will show no service. Or it'll have bars but no data service. Or I won't be able to call out.
There also seems to be an unusual amount of spots where I have no service.
When I do have service, the data can get really really slow.
My GPS lock also frequently gets lost during navigation.
Any ideas? Do I need to flash a kernal, modem, or radio or something? Which ones?
fuzzybabybunny said:
I've got the T-Mobile M919 S4 and I have a 4.4.4 ROM on it (Insane Hybrid).
I've got the latest NK2 Baseband and I also don't want to upgrade to Lollipop since I did before and it was lag lag lag lag lag after a week or so.
I've noticed recently that it is getting very poor reception.
My buddy's S3 will have two bars and mine will show no service. Or it'll have bars but no data service. Or I won't be able to call out.
There also seems to be an unusual amount of spots where I have no service.
When I do have service, the data can get really really slow.
My GPS lock also frequently gets lost during navigation.
Any ideas? Do I need to flash a kernal, modem, or radio or something? Which ones?
Click to expand...
Click to collapse
Try updating your baseband. That sometimes solves it. Here's the link:
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Saturny said:
Try updating your baseband. That sometimes solves it. Here's the link:
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Click to expand...
Click to collapse
Thanks, I'll give those a shot. I'm going to flash this and see what happens:
http://forum.xda-developers.com/gal...stock-base-4-4-4-nk2-rooted-deodexed-t2990478
I'm still a bit confused on some of the terminology and what's bundled with what.
- The "modem" is the same as the "radio", right? It's a driver that controls how the device deals with cellular voice and data signals. I can find the version of my modem/radio by looking at the last letters in my "baseband."
- The modem/radio driver is usually bundled with a ROM, right? So the ROM that I flashed above will also update/replace my current modem/radio driver?
- Modem/radio drivers can be separate from the ROM itself. If I use a 4.4.4 rom that has NK2 bundled, I can still flash just a NH4 radio using ODIN onto the old ROM and be ok, right?
- Where does the kernal come in? I'm assuming the kernel is bundled with the ROM and the kernal is only in charge of the switching between cellular and WiFi data, right?
That's the price you pay with custom roms, sometimes your lucky and everything works the way it's supposed to sometimes it doesn't.
Run phone for a day and make sure everything works properly after flashing back to stock before attempting custom again.
If you need your device to function as a reliable phone, making and receiving calls and messages you may have to rely on stock roms.
Pp.
fuzzybabybunny said:
Thanks, I'll give those a shot. I'm going to flash this and see what happens:
http://forum.xda-developers.com/gal...stock-base-4-4-4-nk2-rooted-deodexed-t2990478
I'm still a bit confused on some of the terminology and what's bundled with what.
- The "modem" is the same as the "radio", right? It's a driver that controls how the device deals with cellular voice and data signals. I can find the version of my modem/radio by looking at the last letters in my "baseband."
- The modem/radio driver is usually bundled with a ROM, right? So the ROM that I flashed above will also update/replace my current modem/radio driver?
- Modem/radio drivers can be separate from the ROM itself. If I use a 4.4.4 rom that has NK2 bundled, I can still flash just a NH4 radio using ODIN onto the old ROM and be ok, right?
- Where does the kernal come in? I'm assuming the kernel is bundled with the ROM and the kernal is only in charge of the switching between cellular and WiFi data, right?
Click to expand...
Click to collapse
This. Would anyone please answer the above questions above as I am also looking for some answers to the questions above?