Develop Bugs

clockworkmod 2.5.0.5 to 2.5.1.2

so im on .0.5 and i seen that there is a 1.2 version available.. i've had no problems before or currently with .0.5, but i'm curious to the changelog of 1.2.. i'm not finding any info on it.. anything that would blow my mind or offer benefits.. much thanks..

I can confirm that it has optical trackpad scroll and works with SLCD screens.

No problems here either. Flashed a ROM, a kernel, a theme with 2.5.1.2 then restored a backup made with 2.5.0.5.

Ditto with the above. Flashed old backup using the new version of clockwork

where do i find if i am amoled or slcd??

I flashed clockworkmod 2.5.1.2 and now i can't get into recovery. It will boot into fastboot and hboot but when i click recovery from hboot it brings me to fastboot. Same thing when i try it from rom manager
incredible rooted with latest CM nightly, s-off

gbishop18 said:
I flashed clockworkmod 2.5.1.2 and now i can't get into recovery. It will boot into fastboot and hboot but when i click recovery from hboot it brings me to fastboot. Same thing when i try it from rom manager
incredible rooted with latest CM nightly, s-off
Click to expand...
Click to collapse
I can't reproduce this for ya, sorry I can't help.

Anyone know what was changed in the newest version? I'm tempted to switch back to 2.5.1.1 because it was workings fine for me and I don't know if this one will. Creating a backup right now hopefully it works, I want to try out the new skyraider rom

gbishop18 said:
I flashed clockworkmod 2.5.1.2 and now i can't get into recovery. It will boot into fastboot and hboot but when i click recovery from hboot it brings me to fastboot. Same thing when i try it from rom manager
incredible rooted with latest CM nightly, s-off
Click to expand...
Click to collapse
Same thing just happened to me. I had to re-flash the new version in Rom Manager and it works fine now.

gbishop18 said:
I flashed clockworkmod 2.5.1.2 and now i can't get into recovery. It will boot into fastboot and hboot but when i click recovery from hboot it brings me to fastboot. Same thing when i try it from rom manager
incredible rooted with latest CM nightly, s-off
Click to expand...
Click to collapse
Try having Rom Manager flash it again?

JarrettXavier said:
I can confirm that it has optical trackpad scroll and works with SLCD screens.
Click to expand...
Click to collapse
Just want to confirm that you mean this version works without the extra mod?

Only difference I've noticed is the addition of fix permissions and partition sd card under the Advanced tab

Is anyone sitting on "checking MD5 sums" for a while doing anything in clockwork recovery?

camblue said:
Is anyone sitting on "checking MD5 sums" for a while doing anything in clockwork recovery?
Click to expand...
Click to collapse
Do you mean it takes a long time, or that it never completes?
Checking MD5s can take a while.

It completes, but takes about 10 minutes. 2.5.1.1 had this problem as well.
Sent from my ADR6300 using XDA App

20twins10 said:
where do i find if i am amoled or slcd??
Click to expand...
Click to collapse
hit menu, settings, about phone, hardware and if your hardware ends in 003 its a lcd model if its 001 or 002 its amoled
Sent from my pimped out phone

gbishop18 said:
I flashed clockworkmod 2.5.1.2 and now i can't get into recovery. It will boot into fastboot and hboot but when i click recovery from hboot it brings me to fastboot. Same thing when i try it from rom manager
incredible rooted with latest CM nightly, s-off
Click to expand...
Click to collapse
I also can't get into recovery after flashing the new clockworkmod. Will boot into hboot but when I try to boot into recovery I get stuck at the HTC Incredible white screen.

In ROM Manager, clear download cache. Then flash a different version of Clockwork, the reflash the current one and test.
Sent from my ADR6300 using XDA App

It's working fine for me. I opened up ROM Manager to do a back up and it prompted me to update CWM. I did it. Have rebooted into recovery a few times to be sure and have made a backup. Also the optical trackpad works MUCH faster and better in this version.

TheGreatGatsby00 said:
I also can't get into recovery after flashing the new clockworkmod. Will boot into hboot but when I try to boot into recovery I get stuck at the HTC Incredible white screen.
Click to expand...
Click to collapse
It might be a SLCD-related brick issue. On the previous version of CWM (2.5.0.5), you could flash a mod by (koush? adrynalyne? sp?) on top to get it working.
(I can't post links yet, so if you google "Rooting stock 2.2 using unrEVOked 3.22" it will be the first link, it's on incredibleforum, Step 3A of the OP)
Alternatively, putting BAMod on the root of your SD card works (if you don't get revoked tool etc to run cos it won't boot up) to start up your phone again into recovery. Remember to rename to "PB31IMG.zip"
Link: http://forum.xda-developers.com/showthread.php?t=845451

[Q]I got a big problems about recovery

it's my DHD's HBOOT screen
ACE PVT ENG S-OFF
HBOOT-0.85.2007 (PDB9810000)
MICROP-0438
RADIO-26.06.03.24_M2
eMMC-boot
Oct 11 2010, 12:44:14
SYSTEM INFO
OS Ver. -1.35.708.4
CID-11111111
Now, i can't enter the recovery. It only can enter to fastboot.
Then i use the "fastboot boot recovery.img"
and it shows
downloading ‘boot.img’<4322 KB>… OKAY
booting… OKAY
but it still cannot enter clockwork just stop at the HTC screen.
and I use "fastboot flash recovery recovery.img"
and it shows
sending ‘recovery’<4322 KB>… OKAY
writing ‘recovery’… OKAY
but i still can't enter clockwork.
I have no idea, somebody who can help me?
I'm sorry that my poor English

What recovery and rom are you using.
Sent from my Desire HD using XDA App

I used CWM 3.0.0.5 and 2.5.1.3, both are not working
And I use the official rom, I am not flash new rom(Revolution) yet.

tommy0411 said:
I used CWM 3.0.0.5 and 2.5.1.3, both are not working
And I use the official rom, I am not flash new rom(Revolution) yet.
Click to expand...
Click to collapse
in the fastboot screen, choose recovery (by pressing volume button + -) and then enter (using power button) ..

Hmmmm. I'm stumped. The only thing I can suggest is flash the pb98img from your bootloader and reroot.
Sent from my Desire HD using XDA App

I suppose you can boot your phone right?? Then the easiest way to get cwm is via an app called "Rom Manager". Download Rom manager from market and choose flash recovery...it would do it. Enjoy!

pwraggcan said:
Hmmmm. I'm stumped. The only thing I can suggest is flash the pb98img from your bootloader and reroot.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
He definitely has hboot eng s-off so this won't help.
Perhaps you should try using rom manager to download and install cwm? You may be trying to flash an incorrect recovery version. Where did you get your recovery.img from? If it's cwm it would normally be named recovery-clockworkmod-2.5.1.3.img or similar. Recovery.img would normally be the filename for the stock recovery.
-----
Someone Swyped my idea.

Yeah, I recommend verifying that you are trying to flash a DHD recovery. Try it like this:
fastboot erase recovery
fastboot flash recovery <path>
Sent from my Desire HD using Tapatalk

hedayat7 said:
in the fastboot screen, choose recovery (by pressing volume button + -) and then enter (using power button) ..
Click to expand...
Click to collapse
THX, I try it, but it can't enter.

pwraggcan said:
Hmmmm. I'm stumped. The only thing I can suggest is flash the pb98img from your bootloader and reroot.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
thx, I try it many times, but ......... it is not working

jkoljo said:
Yeah, I recommend verifying that you are trying to flash a DHD recovery. Try it like this:
fastboot erase recovery
fastboot flash recovery
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
thx i did that, but doesn't work.

dr.m0x said:
He definitely has hboot eng s-off so this won't help.
Perhaps you should try using rom manager to download and install cwm? You may be trying to flash an incorrect recovery version. Where did you get your recovery.img from? If it's cwm it would normally be named recovery-clockworkmod-2.5.1.3.img or similar. Recovery.img would normally be the filename for the stock recovery.
-----
Someone Swyped my idea.
Click to expand...
Click to collapse
sphuyal said:
I suppose you can boot your phone right?? Then the easiest way to get cwm is via an app called "Rom Manager". Download Rom manager from market and choose flash recovery...it would do it. Enjoy!
Click to expand...
Click to collapse
actually, I can't boot my phone.
Woooooo
And I download the recovery.img from XDA and I check the MD5.
BTW the file name is clockwork-2.5.1.3.img, then I renamed it to recovery.img.

tommy0411 said:
actually, I can't boot my phone.
Woooooo
And I download the recovery.img from XDA and I check the MD5.
BTW the file name is clockwork-2.5.1.3.img, then I renamed it to recovery.img.
Click to expand...
Click to collapse
Ok assuming that the md5 sum of the file you downloaded is correct and you have got HTC sync installed in your pc, i suggest you to use this guide to flash your recovery:
http://forum.xda-developers.com/showthread.php?t=896597
This is a guide to flash radio but it should work fine for recovery as well. Just replace the word radio with recovery.

take a look at this as well: http://forum.xda-developers.com/showpost.php?p=11355937&postcount=15

[Q] Help from the wise please

i have a big issue, i wanted to update my radio,wimax, ect on my rooted evo.. so i downgraded clockword mod back to v2.5.0.7 because of the scripts and binary issues so i could zip the files then i flashed HBOOT-0.76.2000 now my phone stays on the bootloader screen and when i go to recovery to flash and restore a backup it keeps telling me checking MD5 sums.... erasing boot before restore...... restoring boot image.. Erroe while flashing boot image, what is wrong with my boot image why cant it find it and can anyone help sorry im still kinda a noob

Did you properly sign the zip you made? Did you know that Calkulin has already created a zip containing the radio updates and it is available to download from http://www.mediafire.com/file/9a1ju....00.11.19_WiMAX_27167_R01_PRI_NV_1.90_003.zip
All you have to do is go into recovery and flash it. As for the HBOOT you flashed, what version did you have prior to flashing HBOOT v0.76.2000? I hope it wasn't v2.10.0001 or 2.02.0000 because they allegedly cannot be downgraded. Finally, are you able to boot into your homescreen or are you stuck looping into the bootloader or recovery screen?

If you have the eng bootloader you can pull the boot.img and use 'fastboot flash boot boot.img'.
Of course you'll need to have the phone in fastboot mode and the boot.img in the same folder as fastboot.
Sent from my PC36100 using XDA Premium App

i cant recall which hboot i had but it might have been 2.10 or 2.20 so if i cant downgrade does that mean im screwed? and as far as the bootscreen yea i am stuck looping around in both that and the recovery screen so how should i go about it because i already had flashed the new radios ect it was when i flashed that hboot 0.76.2000 that got everything messed up

it says my ENG S-OFF what does that mean again

pabz02 said:
i cant recall which hboot i had but it might have been 2.10 or 2.20 so if i cant downgrade does that mean im screwed? and as far as the bootscreen yea i am stuck looping around in both that and the recovery screen so how should i go about it because i already had flashed the new radios ect it was when i flashed that hboot 0.76.2000 that got everything messed up
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=883548
You can try that...came across it last night while looking for something else.

teh roxxorz said:
http://forum.xda-developers.com/showthread.php?t=883548
You can try that...came across it last night while looking for something else.
Click to expand...
Click to collapse
So I figured something that I didn't think of before I put a pc36img on the root of my sd and it updated everything so I'm up and running again guys thanx for your support

Screwed up my One X

I tried installing a custom rom today and I think I messed up really bad, because my phone does not get pass the boot screen and I cannot enter the recovery setting. I think I messed up after entering
fastboot flash boot boot.img
in the command prompt and restarting because I forgot to put the rom zip on my phone. Since then I could not get pass the boot screen and even tried running a backup using CWM, but it didn't help. I then managed to mount my phone and put the rom onto it and installed it, but again it didn't help.
Now my phone can only enter the bootloader, I select hboot and fastboot, but nothing else works. Everytime I select recovery or factory reset I get the htc boot screen and it gets stuck. Does anyone have any solutions?
Thanks

did u backup your phone rom???
if you did u can go to recovery and restore it
and never try to change rom again trust me in that
otherwise i can't help bcuz i did the same mistake

I did make a backup, but like I said I can't enter recovery anymore, so I can't load the backup.
Thanks for trying to help anyway though.

fastboot erase cache
Often fixes recovery problems.

BenPope said:
fastboot erase cache
Often fixes recovery problems.
Click to expand...
Click to collapse
Still not working, thanks anyway.

What HBOOT version do you have and what custom ROM are you trying to install?
edit: you didn't need to restart after changing boot.img cause in Recovery you can just go Advanced and then mount USB and copy the ROM or whatever files you want that way.

BlueSingA said:
What HBOOT version do you have and what custom ROM are you trying to install?
edit: you didn't need to restart after changing boot.img cause in Recovery you can just go Advanced and then mount USB and copy the ROM or whatever files you want that way.
Click to expand...
Click to collapse
I have hboot 1.39.0000 and I was trying to install the latest cyanogenmod cm-10-20130106-NIGHTLY-endeavoru.
Yeah I realized this after I restarted and did it get the zip onto the phone. I think I installed it, but the phone is still stuck on the boot screen
UPDATE: Okay I've managed to install CWM recovery, so I think I'm making progress

You had to flash CWM again? Odd..
Anyway, if you happen to encounter the same problem with CM10 I suggest you try some other custom ROM.. Just make sure you "fastboot flash boot boot.img" and then "fastboot erase cache", and if for some reason you decide to format the sdcard or simply forget to add in the ROM zip, you can do it in Recovery when you mount the device as USB under Advanced options. Best of luck!

BlueSingA said:
You had to flash CWM again? Odd..
Anyway, if you happen to encounter the same problem with CM10 I suggest you try some other custom ROM.. Just make sure you "fastboot flash boot boot.img" and then "fastboot erase cache", and if for some reason you decide to format the sdcard or simply forget to add in the ROM zip, you can do it in Recovery when you mount the device as USB under Advanced options. Best of luck!
Click to expand...
Click to collapse
Yeah CWM didn't load up, but I got it working again. Well it seems I'm back to getting the rom to install and being stuck at the boot screen again, so maybe I just need to use a different rom. Thanks for the help though

Okay, I've tried installing a few roms, but unfortunately I'm still on the boot screen, I can sometimes even reach the cyanogenmod boot screen, but get stuck there. I've read that this might be kernel issue, does anyone have any ideas?

CM10 requires a special boot.img for newer hboots. Check post 9308 in CM10 thread.
Sent from my EndeavorU using xda app-developers app

TToivanen said:
CM10 requires a special boot.img for newer hboots. Check post 9308 in CM10 thread.
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
You are a goddamn hero! Thanks, this solved everything.

No problem!
Sent from my EndeavorU using xda app-developers app

[Q] Stuck in Bootloop after flashing old radio

Hi everyone,
I flashed Radio 12.69.60.29_26.17.14.11_M on my Desire HD with ViperDHD 2.3.0 and experienced a high battery drain. So I decided to flash back 12.65.60.29_26.14.04.28_M - HTC 3.12.405.1 WWE but after flashing this radio, my phone was stuck in a bootloop, it got past the white HTC Screen but not after the boot animation.
So again I tried to go back to 12.69.60.29_26.17.14.11_M but it is still not working, whtat do I do now?
Thank you for your help!!

just download a radio from here [the zip file]: http://www.icsforums.com/forum/showthread/26951
rename the file toD98IMG
put it onto ur sd card root
and boot into bootloader
follow instructions
and ur done.

pandora502 said:
Hi everyone,
I flashed Radio 12.69.60.29_26.17.14.11_M on my Desire HD with ViperDHD 2.3.0 and experienced a high battery drain. So I decided to flash back 12.65.60.29_26.14.04.28_M - HTC 3.12.405.1 WWE but after flashing this radio, my phone was stuck in a bootloop, it got past the white HTC Screen but not after the boot animation.
So again I tried to go back to 12.69.60.29_26.17.14.11_M but it is still not working, whtat do I do now?
Thank you for your help!!
Click to expand...
Click to collapse
Use android flasher .....very useful software you can flash easily through this SW...
Sent from my HTC Desire HD using xda premium

Hey, thanks for your replies!
If I download a radio file from the page and rename it to PD98IMG, in bootscreen it is parsed but then nothing happens, I think you cannot install those radios like that...
I used the android flasher tool and flashes the latest radio...didn't work, it is still bootlooping
Any other ideas?
Thanks again for your help!!

As I suspected, I downloaded one of those zips and your right, you can't use those for PD98IMG.ZIP method as they are not correct or compleat, there are 2 files missing inside and I also belive the zip needs to be signed to flash new radio like that too.
Those zips only contain the radio.img file and can only be flashed in fastboot mode, from memory the command is
Fastboot flash radio radio.img
Sent from my GT-I9505 using xda app-developers app

Yes, I suspected that, too, and already flashed the radiofile using fastboot mode, and that was successfull, but my phone is still not booting

pandora502 said:
ranger4740 said:
As I suspected, I downloaded one of those zips and your right, you can't use those for PD98IMG.ZIP method as they are not correct or compleat, there are 2 files missing inside and I also belive the zip needs to be signed to flash new radio like that too.
Those zips only contain the radio.img file and can only be flashed in fastboot mode, from memory the command is
Fastboot flash radio radio.img
Sent from my GT-I9505 using xda app-developers app[/QUO
Yes, I suspected that, too, and already flashed the radiofile using fastboot mode, and that was successfull, but my phone is still not booting
Click to expand...
Click to collapse
Have you tried wiping cache and dalvik?? Are you still able to boot in recovery?
Click to expand...
Click to collapse

Yes, I am still able to boot into recovery. I wiped cache and dalvik and even restored system and boot from a backup but this didn't help either..

try this:http://www.4shared.com/zip/Q4NeZZpU/pd98img-dhd-radio_12656029_261.html
if not this radio just change the radio.img in the directory.
mine works well.
and when i searched at net i tried to flash via fastboot method it said failed
i searched and found that i had eng s-on(another security after normal s-off)
but the pd98img thing successfully flashed my radio.
maybe the radio ur downloading is compatible with ur device.

Tanks again for your help, but this is somehow not the problem. All the radios I flash are flashed successfully and yet it will not boot..there must be something else, that prevents correct booting process..

pandora502 said:
Tanks again for your help, but this is somehow not the problem. All the radios I flash are flashed successfully and yet it will not boot..there must be something else, that prevents correct booting process..
Click to expand...
Click to collapse
Ok, try flashing a RUU (that contains Radio among other partitions) Make sure that you wipe and format everything before the flashing and see what happens.

But flashing RUU will give me a stock room and I will loose my CMW-Recovery and I won't be able to fllash a custom rom, right?

[SOLVED]
Okay, thanks again everbody for your help. I just flashed another custom rom(KingCobraDHD) and everything is just working fine!