Related
Kernels will be on kernel manager
Changelog 1.0:
- Enabled swap support
- Enabled compcache support
- Added smartass governor
- Added scary governor
- Added batterysave governor [basically conservative]
- Disabled sleeper
- Removed userspace governor
reserved for later
download now To test on sense 3.0 .
stian230 said:
download now To test on sense 3.0 .
Click to expand...
Click to collapse
Let me know how that works out
Remember what I said in OP. Might work or might not
Sent from my HTC Vision using Tapatalk
Flashing now. Will report back with results.
I assume this works with any nightly/stable cm7? Like it doesn't break the camera or wifi?
Sent from my HTC Vision using XDA App
0.0 said:
I assume this works with any nightly/stable cm7? Like it doesn't break the camera or wifi?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
This kernel has NO issues.
Please read the OP. It states everything in there
blahbl4hblah said:
This kernel has NO issues.
Please read the OP. It states everything in there
Click to expand...
Click to collapse
ok thanks. i will test this out, and will see how it goes
Just flashed and my wifi broke. Is it be because of the radio am using? Using .30
Sent from my HTC Vision using XDA Premium App
It's pretty funny. Wifi shouldn't be broken period.
If there's a problem post a logcat
blahbl4hblah said:
It's pretty funny. Wifi shouldn't be broken period.
If there's a problem post a logcat
Click to expand...
Click to collapse
Lol alrighty. Aha just flashed again and it started working. Thanks for the kernel bro.
Sent from my HTC Vision using XDA Premium App
Ok, thinking about flashing this.
What is the min / max CPU freq of this kernel? I like to run my phone at 1ghz
Do I use SetCPU for this?
booted fine on sense 3.0 everything is going very fast, BUT lost the camera and some 3D graphics on the weather. This has happened every time I try a oc kernel on sense 3.0. regardless this is probably a good kernel .when I get tired of sense in a few days and flasher cm7 again I will test your kernel. Thx.
I just flashed your kernel, well, kind off. In cwm everything looks fine but after booting it looks like the kernel was not changed. No new governors or other changes :S
stian230 said:
booted fine on sense 3.0 everything is going very fast, BUT lost the camera and some 3D graphics on the weather. This has happened every time I try a oc kernel on sense 3.0. regardless this is probably a good kernel .when I get tired of sense in a few days and flasher cm7 again I will test your kernel. Thx.
Click to expand...
Click to collapse
Really? Only camera broke?
Sent from my HTC Vision using XDA Premium App
blahbl4hblah said:
It's pretty funny. Wifi shouldn't be broken period.
If there's a problem post a logcat
Click to expand...
Click to collapse
Users are mentioning same problems with eugene's kernel, so something is going wrong in combination with certain roms/radios
GiGi. said:
I just flashed your kernel, well, kind off. In cwm everything looks fine but after booting it looks like the kernel was not changed. No new governors or other changes :S
Click to expand...
Click to collapse
i tested it and same here, no new governors. I am on CM7, nightly #65 w/ the .30 radio. also wifi broke for me. under "wifi", it says "Error" and the checkbox wont check (wifi wont turn on). i flashed multiple times and wiped dalvik-cache, but nothing worked
EDIT: disregard above post about the wifi. downgraded radio as lainvalenajr has mentioned, and now it works fine. but the issue of still having no new governors is still present
GiGi. said:
Users are mentioning same problems with eugene's kernel, so something is going wrong in combination with certain roms/radios
Click to expand...
Click to collapse
Had to Downgraded radio
Sent from my HTC Vision using XDA Premium App
GiGi. said:
I just flashed your kernel, well, kind off. In cwm everything looks fine but after booting it looks like the kernel was not changed. No new governors or other changes :S
Click to expand...
Click to collapse
Ditto. I'll probably downgrade the radio as mentioned and try to reflash.
what do i do? i was flashing cm 7.03 and now its just stuck on the screen where the blue arrow goes around and around. what do i do? any help is appreciated.
happymfeet said:
what do i do? i was flashing cm 7.03 and now its just stuck on the screen where the blue arrow goes around and around. what do i do? any help is appreciated.
Click to expand...
Click to collapse
Take out the battery. Put it back in and start your phone again. If the same happens repeat the battery pull but this time hold down on the volume bar and THEN press the power button to restart your phone. After it starts up in bootloader select recovery by moving the volume bar and then hit the power button again. This will bring you back to recovery where you can flash the rom again or restore your backup.
EdKeys said:
Take out the battery. Put it back in and start your phone again. If the same happens repeat the battery pull but this time hold down on the volume bar and THEN press the power button to restart your phone. After it starts up in bootloader select recovery by moving the volume bar and then hit the power button again. This will bring you back to recovery where you can flash the rom again or restore your backup.
Click to expand...
Click to collapse
Thanks im restoring my backup now. I thought i had bricked my phone or something. i just rooted my phone so this was my first ROM that i was flashing so I wasn't sure of what to do.
I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.
happymfeet said:
I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.
Click to expand...
Click to collapse
YouTube is your best friend sir. I wish I had one to direct you to, but a Google or YouTube search with do you just fine.
Sent from my HTC Vision using XDA Premium App
happymfeet said:
I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=jYOzWLVnBuc&feature=fvst
Note: Start @ 3:15. In the video clockwork mod is black/green but that's just because its an older version, the newer version is black/orange. All the steps are still the same though.
Sent from my HTC Vision using XDA Premium App
eioous said:
Note: Start @ 3:15. In the video clockwork mod is black/green but that's just because its an older version, the newer version is black/orange. All the steps are still the same though.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Thanks, appreciate it.
Sent from my HTC Vision using XDA App
happymfeet said:
Thanks, appreciate it.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Also keep in mind that some roms can take up to 5 minutes to load the first time. Normally (but definetely NOT always) as long as it doesn't keep reloading the boot animation, everything is fine - the rom is building your file system on your first boot.
Sent from my shiny metal G2 w/ meXdroid V3
What rom do you all think is the best? Im currently on cm 7.02 and i like it but i want to know your opinions
Sent from my HTC Vision using XDA App
Also what are
Sent from my HTC Vision using XDA App
Also what are the benefits of switching kernels? And which do you all recommend?
Sent from my HTC Vision using XDA App
if you took the time to read about kernels and what they are you would know.
but, i'm in a good mood today:
Kernels govern your cpu speed and how to scale it. Some are locked to a certain frequency set and some are made adjustable, but you have to get an app that interacts with the kernel otherwise it runs at whatever it is preset to.
SetCPU is the one I used, but I know there are plenty out there that others would recommend and swear by in a heartbeat.
mputtr said:
if you took the time to read about kernels and what they are you would know.
but, i'm in a good mood today:
Kernels govern your cpu speed and how to scale it. Some are locked to a certain frequency set and some are made adjustable, but you have to get an app that interacts with the kernel otherwise it runs at whatever it is preset to.
SetCPU is the one I used, but I know there are plenty out there that others would recommend and swear by in a heartbeat.
Click to expand...
Click to collapse
Thanks, which kernel do you have and would you recommend me getting it?
Sent from my HTC Vision using XDA App
I'm using Virtuous rom 1.02 with the advanced kernel. I clocked mine at 475-1100mhz with a low battery profile switch at 275-887 (i think).
Check your rom specific kernel to make sure it runs best for your rom. The rest is personal preference.
Sent from my Desire Z via XDA App
*sigh* Give a man a fish and he will eat all day. Teach a man to fish and he will drink beer all day.
Since you're on CyanogenMod, I recommend Pershoot's kernel (available through ROM Manager). If you're feeling bold, download Flippy's latest kernel. Since I'm running the CM-based PyroMod, Pershoot's kernel is built in.
Everytime i flash a rom do i need to flash clockwork mod recovery?
Sent from my HTC Vision using XDA App
I suggest you check out the stickies sections that has links to a bunch of very well written guides that answer all your questions. the responses you get here are going to turn ugly very fast.
Sent from my T-Mobile G2 using XDA Premium App
If you open clockwork and your current recover is the same as newest version then there is no need to reflash recovery. The only reason to reflash clockwork is if there is a newer version out.
Sent from my HTC Vision, G2, Ultra super premium awesome phone.
Hello, i am new to the android world, and am loving it. Ive tried a couple of roms, and decided to stick with Liquid Smooth Jelly Bean Rom. My only problem is this:
i have set the max frequency for the processor to be 1512 mhz(or lower sometimes), but sometimes it keeps automatically setting itself to 1900mhz, which i do not want. Is there a way to set it so that it will never go above 1512?
btw i am on 3.0.45 leanKernel if that helps.
Thanks
Check mark the set on boot box and restart phone right away after you change it back to 1500mhz.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Deoxlar said:
Check mark the set on boot box and restart phone right away after you change it back to 1500mhz.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you! I'm trying it out right now =]
Sent from my SGH-I747 using xda app-developers app
Hello. So I tried this method and thought it worked.. but today while watching YouTube and texting it went up to 1900 again. I repeated the method a couple more times but it just maxes out all the time. Am I doing something wrong?
Thanks
Sent from my SGH-I747 using xda app-developers app
are there any solutions to this?
Depends what kernel you're running, some kernel apps let you lock the frequencies so they cannot be changed by apps. If an app needs to run faster it will bump up the speed, so might want to check into that. Works on KT747 Kernel (Ktweaker).
DarthDerron said:
Depends what kernel you're running, some kernel apps let you lock the frequencies so they cannot be changed by apps. If an app needs to run faster it will bump up the speed, so might want to check into that. Works on KT747 Kernel (Ktweaker).
Click to expand...
Click to collapse
Ty for reply. Also, Any cm10 kernel will work with liquid smooth jb right? If so, is there a tutorial on just how to flash kernel with a different rom ?
Sent from my SGH-I747 using xda app-developers app
ohaai said:
Ty for reply. Also, Any cm10 kernel will work with liquid smooth jb right? If so, is there a tutorial on just how to flash kernel with a different rom ?
Here's the link for the KT747 Kernel http://forum.xda-developers.com/showthread.php?t=1756776 . It works with all AOSP (CM10, AOKP etc.) aswell as most touchwiz roms. I've never used Liquidsmooth so Idk what it's about but this thread should contain information about which roms it is compatible with. If you have any questions I suggest starting a new thread about what its compatible with or asking directly in the thread. Good luck Always flash Rom before kernel.
Click to expand...
Click to collapse
ty will do
I need some help. So my issue can be a couple of things. So I flashed a beanstalk Rom last night and as of this morning and early afternoon I had internet, could connect to Fb and etc. But I also had my line switched last night from being under my ex's line to my own and for a moment then I couldn't connect until I selected some plan. So back to today everything has been fine until I noticed flashing the latest Nos script. It was some time after then where I couldn't log on. Not immediately but I knew since then I couldn't. So my question is would it be because of that script or something on the t-mobile side? I haven't called because my phone is rooted and not sure how to handle that. I also don't know if apn settings may be messed up? Please help and thanks
Sent from my SGH-T849 using xda app-developers app
Also I can't connect through wIfi also. I go into settings and turn it on but it can't be selected it doesn't move.
Sent from my SGH-T849 using xda app-developers app
Try a different radio
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have many app ideas, but don't have the skill or the time to learn how to make an app. if you would like to know an idea and attempt to make one, just message me.
Sounds like there's a problem with the script. You could make a nandroid and do a clean flash to see if everything works.
OK so I think it was a script or possibly the kernel. I went to a nandroid I made last night and went to that. Had the same radio and but no script and not the newer kernel and it works fine.
Sent from my SAMSUNG-SGH-T989 using xda premium
suaverc118 said:
I need some help. So my issue can be a couple of things. So I flashed a beanstalk Rom last night and as of this morning and early afternoon I had internet, could connect to Fb and etc. But I also had my line switched last night from being under my ex's line to my own and for a moment then I couldn't connect until I selected some plan. So back to today everything has been fine until I noticed flashing the latest Nos script. It was some time after then where I couldn't log on. Not immediately but I knew since then I couldn't. So my question is would it be because of that script or something on the t-mobile side? I haven't called because my phone is rooted and not sure how to handle that. I also don't know if apn settings may be messed up? Please help and thanks
Sent from my SGH-T849 using xda app-developers app
Click to expand...
Click to collapse
It's most likely the script I had conflicting wifi and data tweaks once same thing happened to me couldn't connect to anything until I figured it out. It was the sysctl. conf file conflicting with the build prop and int.d tweaks I had.
Sent from my SGH-T989 using Tapatalk 2
richardlibeau said:
It's most likely the script I had conflicting wifi and data tweaks once same thing happened to me couldn't connect to anything until I figured it out. It was the sysctl. conf file conflicting with the build prop and int.d tweaks I had.
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Thanks man, you're always helpful in these forums. Did you just remove the script after that or just reflashed the ROM? And what ROM are you currently running? Thanks bro
Sent from my SAMSUNG-SGH-T989 using xda premium
suaverc118 said:
Thanks man, you're always helpful in these forums. Did you just remove the script after that or just reflashed the ROM? And what ROM are you currently running? Thanks bro
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Yeah I removed the script including the sysctl. conf file. Then put the original one back and it was good. I have been running Liquidsmooth RC9 since November as my main rom. Have V6, GPU oc'd, reversed mounting script for external/internal sd, and sound mods on it with kko kernel. I flash all the roms though just to see how they run. I really like the linaro builds lately that are coming out. They seem to be getting snappier and overclocking to 2ghz with the uber kernel is sweet just to test with but not an all day thing or your phone will blow up. Been staying on 4.1.2 for stability reasons mainly. Camera and video doesn't act crazy, notification lights work, and the coding of the kernels isn't out of whack like some of the 4.2.2 roms. Eventually I will jump fully to a 4.2.2 rom but for now I am good with 4.1.2 because it's reliable with no issues.
Sent from my SGH-T989 using Tapatalk 2
richardlibeau said:
Yeah I removed the script including the sysctl. conf file. Then put the original one back and it was good. I have been running Liquidsmooth RC9 since November as my main rom. Have V6, GPU oc'd, reversed mounting script for external/internal sd, and sound mods on it with kko kernel. I flash all the roms though just to see how they run. I really like the linaro builds lately that are coming out. They seem to be getting snappier and overclocking to 2ghz with the uber kernel is sweet just to test with but not an all day thing or your phone will blow up. Been staying on 4.1.2 for stability reasons mainly. Camera and video doesn't act crazy, notification lights work, and the coding of the kernels isn't out of whack like some of the 4.2.2 roms. Eventually I will jump fully to a 4.2.2 rom but for now I am good with 4.1.2 because it's reliable with no issues.
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Kener has a beanstalk ROM with updated cm10.1 merges and using his latest Uber nightly along with cross bread and its flying. Not even over clocked right now. Running for 4 hours and so far no issues. I'm praying Lol!
Sent from my SAMSUNG-SGH-T989 using xda premium
Yeah I tried it and it's a fast rom . I used his Uber 2ghz kernel with it. That is in his WickedAwesome folder.
Sent from my SGH-T989 using Tapatalk 2
777Kernel​
I have compiled Hashcodes otterx kernel source with the added bonus of "smartassV2" governor.
all credit to Hashcode for his source. ONLY FOR SLIMKAT (at the minute, sorry)
Changelog
Version 0.01
added cpufreq_smartass.c to work with the otterx and added initial commits for SmatassV2.
Downloads
Version 0.01
Link: http://www.androidfilehost.com/?fid=23501681358562481
Installation
I am not responsable if this kernel makes your kindle explode, melt or burst into flames
please make a recovery backup 1st.
download and flash in Twrp then wipe caches and reboot.
Source code Link: http://github.com/lovejoy777/kernel_omap_otter-common
XDA:DevDB Information
777Kernel_OtterX, Kernel for the Amazon Kindle Fire
Contributors
lovejoy777, Hashcode
Kernel Special Features: SmartassV2 governor
Version Information
Status: Testing
Current Beta Version: 0.01
Beta Release Date: 2014-07-15
Created 2014-07-15
Last Updated 2014-07-25
just in case
use trickstermod app or similar to change governor to smartass
Enjoy Steve
Nice job!
Sent from my OtterX running SlimKat 4.4.4 using Tapatalk
Running it with no problem. Thanks
Sent from my Nexus 5 using XDA Free mobile app
Running well for me so far too. Noticeably smoother.
Hello
Could You try compile this kernel in Linaro Toolchain ?
Maybe this compiler give us extra improvements
Tell me if its possible
lllukas said:
Hello
Could You try compile this kernel in Linaro Toolchain ?
Maybe this compiler gets us extra improvements
Tell me it is possible
Click to expand...
Click to collapse
+1
Sent from my Nexus 5 using XDA Free mobile app
lllukas said:
Hello
Could You try compile this kernel in Linaro Toolchain ?
Maybe this compiler gets us extra improvements
Tell me if its possible
Click to expand...
Click to collapse
never done it before, but i could try
Sent from my Nexus 5 using Tapatalk
With smartassv2, Almost every time I turn on the OtterX, my last opened app (kindle) will give warning "amazon kindle is not responding". And ask if I want to close it or wait. It didn't crash though, and by choosing "wait", I can use the app like usual.
Happenning with kindle app only so far AFAIK.
Sent from my Nexus 5 using XDA Free mobile app
i have tried to reproduce. but can't all ok here. i opened kindle app then turned off screen, when i turn on screen its still there. also tried opening app then press home then turn off screen and back on all still ok. what process are you doing to produce error?
Sent from my Nexus 5 using Tapatalk
i think the reason we are not getting any sod's with this setup is the wakeup freq is set at 1.2 i tried it at 1.08 and got a sod. also that's why even with max set at 1.08 it still shows 1.2 has been used a tiny bit.
Sent from my Nexus 5 using Tapatalk
Probably after deep sleep?
Not always, but quite often..
Didn't happen now anyway after I turn off overnight.
OK, no crashes today
Sent from my Nexus 5 using XDA Free mobile app
Just got the latest slimkat and this kernel installed. I will let you know if I have any problems.
Sent from my Amazon OtterX using Tapatalk
got it to build wityh linaro toolchain but after packing into a boot.img it doesn't boot? ill keep at it?
Possible to build whole ROM with Linaro?
Sent from my Nexus 5 using XDA Free mobile app
lovejoy777 said:
got it to build wityh linaro toolchain but after packing into a boot.img it doesn't boot? ill keep at it?
Click to expand...
Click to collapse
Try older version linaro, 4.8 for example.
Many thanks for trying !
i will try tonight
Sent from my Nexus 5 using Tapatalk
lovejoy777 said:
i will try tonight
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I read somewhere on xda that new ver. Linaro causing botloop on some devices.
Maybe thats its in our case... Or not
Its worth trying
dokie80 said:
Possible to build whole ROM with Linaro?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, its possible.
Litte OT, in my s galaxy s2 i use SlimSaber, its latest slimkat with sabermod and some extra features implemented by dev. Kernel is builds in LinaroToolchain v4.9. Everything works flawlessly, stable, batteryfriendly and smooth.
Our kindle its on right way, even now working good, like never before ! (Its not a speculation or placebo, its fact) We have great dev (yes,yes you @lovejoy777)and we will waiting for new things from You.
Have fun & no rush.
Sorry for my poor english .... (Tell me, its realy bad ? I think no ! )
i just tried with linaro 4.8 and the same thing. i think im doing something wrong. it stays on the splash logo, but it connected to my pc it is detected but can not mount. I have an idea though?.
my old pal @Carlos_Manuel ? need help my friend trying to compile otterx kernel with linaro toolchain.