Develop Bugs

PSFreedom on Rhodium Android?

I was wondering if it's possible with the current state of Android on the Rhodium to get the PSFreedom working on it? It uses the MSM72k controller so it's theoretically possible?

Probably not until we get USB functioning fully

so does usb function fine on the HD2?

The Rhodium port is listed as "In Progress" see here:
Code:
psfreedom.com/wiki/index.php?title=Device_compatibility_list
So fingers crossed

I want this ^^
But I don't if the usb is fully work on the HD2, someone know?

freedom
I have Android working on my TP2, how I get the port working? It must be the same way as the HD2, right ?
Greetz from Germany

xatrix78 said:
I have Android working on my TP2, how I get the port working? It must be the same way as the HD2, right ?
Click to expand...
Click to collapse
Perhaps you're not quite appreciating all the work that has gone into the HD2 port...
The dudes site seems to be down, but it's PSFreedom.com - he has information on what is required to port from the N900. Looks like most of the work is already done, as he's apparently made it very agnostic - just linux-specific stuff for the most part.

Someone put the HD2 files into the TP2 and see if it works
http://forum.xda-developers.com/showthread.php?t=777120#
just extract the files for the hack and put in your android folder

files
where I can get the files ???
I only have the whole image for hd2
thanks

fyi - I have not tested though since I am not at home
HTC Rhodium (HTC Touch Pro 2 / HTC Diamond 2) (Android) HTC RAPHAEL port works perfectly on topaz with XDandroid2.2

loader187 said:
fyi - I have not tested though since I am not at home
HTC Rhodium (HTC Touch Pro 2 / HTC Diamond 2) (Android) HTC RAPHAEL port works perfectly on topaz with XDandroid2.2
Click to expand...
Click to collapse
I have just tested the HTC Raphael port and it works fine on my Touch Pro 2

dubzah said:
I have just tested the HTC Raphael port and it works fine on my Touch Pro 2
Click to expand...
Click to collapse
Dubzah I am having problems with mine. I copied the files zimage, modules and ps3freedom.ko file over and when i try to run it. it comes back with an error of cannot allocate memory.
Do i need certain files on my PC or something? Could you give me the steps you did. also does it matter if it was windows 7?
also i am using the 2.2 froyo build with energy rom.

loader187 said:
Dubzah I am having problems with mine. I copied the files zimage, modules and ps3freedom.ko file over and when i try to run it. it comes back with an error of cannot allocate memory.
Do i need certain files on my PC or something? Could you give me the steps you did. also does it matter if it was windows 7?
also i am using the 2.2 froyo build with energy rom.
Click to expand...
Click to collapse
Right
1) Download the 2.2 reference .cab which you can find here:
Code:
reefermattness.scepterr.info/ProjectAndroid2.2Froyo.083010.cab
and install to your SDcard
2) Download the PSFreedom files from here:
Code:
downloads.moddingway.com/file/5411.html
3) Browse to "andboot" on your SDcard and replace the files with the 3 PSFreedom files (delete the "dirty" from the modules)
Now I just followed TaC's steps:
TaC said:
- Boot in WinMo.
- Plug USB to PC and Sync device (until the end of sync in pc screen)
- Run HARET and let it totally boot in Android WITHOUT UNPLUGING USB FROM PC
- Unplug USB
- Switch off (back switch) PS3
- In Android Terminal > su > cd sdcard > insmod psfreedom.ko
- Plug Diamond to PS3
- Switch on PS3
- Power > Eject
Click to expand...
Click to collapse

dubzah said:
Right
1) Download the 2.2 reference .cab which you can find here:
Code:
reefermattness.scepterr.info/ProjectAndroid2.2Froyo.083010.cab
Click to expand...
Click to collapse
Would the one from http://sites.google.com/site/androidport/downloads work?

this should work on a tp1 isnt it the same processor?

Works.
I rebooted the phone. Connected the usb to the PC before starting haret, waited for it to boot completely and only then disconnected from the PC.
I don't know if it must be connected through USB.
It would be nice if someone could clarify that part, as there are no indicators whatsoever if your doing something wrong.

works on my tp one sweet thanks alot!! now iv downloaded so many backupmanagers i dont know what one to use??

dubzah said:
- In Android Terminal > su > cd sdcard > insmod psfreedom.ko
Click to expand...
Click to collapse
Shouldn't it be:
- In Android Terminal > su > cd sdcard > cd andboot > insmod psfreedom.ko
Or is psfreedom.ko ment to be in the root of the sdcard?
Also does "delete dirty from the modules" mean delete "-dirty" out of "modules-2.6.27.46-01162-g741ab49-dirty.tar.gz" file name?

Snapfour said:
Shouldn't it be:
- In Android Terminal > su > cd sdcard > cd andboot > insmod psfreedom.ko
Or is psfreedom.ko ment to be in the root of the sdcard?
Also does "delete the "dirty" from the modules mean delete the word dirty out of "modules-2.6.27.46-01162-g741ab49-dirty.tar.gz" ?
Click to expand...
Click to collapse
delete(-dirty)

Snapfour said:
Shouldn't it be:
- In Android Terminal > su > cd sdcard > cd andboot > insmod psfreedom.ko
Click to expand...
Click to collapse
It should.
I backed up my Katamari, and after waiting Forever, it won't load :/
Any one got it to LOAD a backup?
Trying LBP now, will see how it goes.

PSFreedom Rhodium Tutorial

Prerequisites:
Tilt 2/Touch Pro 2 phone
HardSPL unlock
Energy Rom (not a prereq but it's the rom i never leave home without)
XDAndroid 2.2 files for tilt 2
XDAndroid launcher
PSfreedom Files for Raphael port
USB Cable
PS3 with firmware 3.41 or lower
Get all this stuff in a nice and neat little stack somewhere.
Before we begin:
A) Gotta do steps 14 through 20 (especially 20) everytime you shut down your PS3 and turn it back on. If you reboot your phone after you've turned off the PS3, you gotta do steps 11 through 20.
B) I'm not responsible for anything you break! This is simply a guide on how I did things to get it working.
C) None of these files are mine and I have included links to every site I pulled info from for this guide at the bottom. If you find this tutorial helpful, please visit all links and donate a little something to the cause!!!!
D) 99% of your problems will be step 19 (usb device is unknown) TIMING IS CRUCIAL!!!!
E) If you're running any overclocking software, disable it before you try to boot XDAndroid or it will not launch!
As a wise mario once said, here we gooooooo!
Step 1:
Connect your phone to your PC via usb cable.
Step 2:
HardSPL unlock (if you've flashed a custom rom than this is likely already done. If you haven't, than do the hard-spl and check out the energy rom.)
Step 3:
Go here and download the rar file. Extract and copy the contents to the root of your sd card. If you downloaded the cab file, you need to copy it to the root of your sd card and then go into file explorer on your phone. Click the cab and INSTALL TO SD CARD!!! Your SD card should now look like X:\andboot
Step 4:
Go here and get the most up to date files appropriate for your PS3 Firmware (to find your firmware version, on your ps3 go to settings, system settings, system information and shoot yourself in the foot if its higher than 3.41). Extract the contents and copy the files to the andboot folder on your SD card ovwerwriting anything that gets in the way of you and your jailbreakd'd'd PS3.
Step 5:
Go here and get this file. Extract and replace the psfreedom.ko in your andboot folder with the one in this rar. (yes, after you download this file, extract it and copy it over the psfreedom.ko file in your andboot folder on your SD card. This is to allow backups to work properly) COPY ONLY THE PSFREEDOM.KO FILE
Step 6:
Get this and copy it to the root of your SD card. Open file explorer on your phone and navigate to the root of your SD card . Run the file you just copied and install it to your device (not sd card)
Step 7:
Make sure your phone is connected to PC via Active Sync (on the phone, click start, settings, connections, usb to PC)
Step 8:
On the phone, press start and run android launcher, (from here you can update android or go to advanced and select some other options)DO NOT UPDATE!!!!!!!!!!!
Step 9:
Select your device in Android Launcher and click boot (DO NOT REMOVE USB CABLE UNTIL XDANDROID IS COMPLETELY BOOTED!!! Once it is booted, COMPLETELY, disconnect usb from phone and computer. Completely booted means at the home screen, not at the xdandroid splash screen!)
Step 10:
Now that you're in xdandroid (if it's your first time, put on a fresh pair of underwear before you continue) go to menu, dev tools, terminal emulator
Step 11:
in terminal, type su and hit enter
step 12:
in terminal, type "cd /sdcard/andboot" (no quotation marks)
Step 13:
in terminal, type "insmod psfreedom.ko" (no quotation marks)
Step 14:
Take your phone and your usb cable and carefully walk to your PS3 (STOP, I DIDN'T SAY PLUG ANYTHING IN YET!!!!!!)
Step 15:
turn off the power switch on the back of the PS3 or kick the main breaker in your house, whichever is easiest for you to find. If it's a diet PS3 (slim), unplug the cable from the back or blow up the transformer outside on the power pole. I chose to blow up the transformer, it makes a louder boom and prettier sparks than simply unplugging your PS3 but what you do is TOTALLY up to you XD.
Step 16:
unplug any usb devices from your PS3
Step 17:
Plug usb cable into phone and PS3
Step 18:
Wait 5 or 6 seconds and turn switch/breaker back on. Then wait another 5 or 6 seconds.
Step 19: !!!!!!TIMING IS CRUCIAL!!!!!!
hit power button immediately follwed by the eject button like your drumming your fingers on them. You should hear three beeps and the PS3 should take a little longer to boot
Step 20:
Flip sony the bird
Step 21:
I needed one more step because I don't like even numbers
I think I covered everything, If I left Anything out, please let me know.
!!!!LINKS!!!!
http://forum.xda-developers.com/showthread.php?p=8076429#post8076429
http://forum.xda-developers.com/showthread.php?t=550131
http://sites.google.com/site/androidport/downloads
http://psfreedom.com/wiki/HTC_Raphael
http://sites.google.com/site/androidport/startup-utility
Thanks to Jim P for a working psfreedom.ko file. He's got another great tutorial for this sort of thing on the Xperia here!
A HUGE THANKS TO THE ENTIRE XDA COMMUNITY WHICH CONTRIBUTED TO AND CREATED ALL THESE THINGS WE NEED TO DO THE THINGS WE WANT!!!!!!!
edit: Me and a few other users have had problems with the original backup manager. The only backup manager I use isGaia Manager. This may not be the most up to date version so do a little searching and you'll find what you need.
Here's a great guide to make a Stealth manager (one that has a better chance of not being detected by Sony. Again, only a better CHANCE. I've played online with my own personal ninja manager but honestly, I'm just waiting until the bans start as I'm sure I'll be one of the first to go XD

After doing some research and kicking my dog for causing the unknown usb device error repeatedly I found a semi solution. When XDAndroid boots, open market and search for Advanced Task Killer. There's also a froyo version bur I haven't checked that one out. Anyway, download it and run before you boot the PS3. Also put the phone into airplane mode. I've had 1st boot success with this a few times now.

i have less stages))
1. payload io SD card
2.add custom shell commands in /sdcard/andboot/conf/froyo.user.conf
# custom shell commands, these commands run last
custom_shells{
chmod 777 /etc/dbus.conf
rm -f /sdcard/fsck*.rec
echo ""
echo ""
echo "***********************************************************"
echo "***************** Disconnect USB from PC ******************"
echo "***********************************************************"
echo "-------------------------*******---------------------------"
echo "-------------------------*******---------------------------"
echo "-----------------------***********-------------------------"
echo "-------------------------*******---------------------------"
echo "--------------------------*****----------------------------"
echo "---------------------------***-----------------------------"
echo "----------------------------*------------------------------"
sleep 3
insmod /sdcard/psfreedom.ko
sleep 1
echo "***********************************************************"
echo "******************* P S F r e e d o m *********************"
echo "***********************************************************"
cat /sdcard/payload.bin > /proc/psfreedom/payload
}
custom_shells{
}
Click to expand...
Click to collapse
and forgot i use mac and i don't sync TP2 (only connect usb)

Looks simple enough.....Thanks

What do you mean shoot yourself in the foot if the firmware is above that. Will I be screwed if it is?

slapshot30 said:
What do you mean shoot yourself in the foot if the firmware is above that. Will I be screwed if it is?
Click to expand...
Click to collapse
Generally speaking, if someone tells you to shoot yourself in the foot, it usually means you're screwed.
Technically speaking, 3.41 is the latest frimware supported by psfreedom. Sony patched the jailbreak in 3.42 and you CAN NOT downgrade. If you've passed 3.41, you're technically, screwed.

Great tutorial, very well explained; however i have a problem with step 5.
The psfreedom.ko i get from that .rar file gives me an invalid module error and the one i download from psfreedom.com just doesn't allow me to play backups.
What am i missing?
Thanks!
*edit*: i was using the wrong manager ... apparently it wasn't compatible with PL3. All fixed!

slapshot30 said:
What do you mean shoot yourself in the foot if the firmware is above that. Will I be screwed if it is?
Click to expand...
Click to collapse
check this out

noodles21o2 said:
check this out
Click to expand...
Click to collapse
VERY NICE TO POINT THIS OUT!!!!!!!!!!
That's right, for a little bit of dough, now anyone and everyone can enjoy their "legally" "obtained" backups

good tutorial

hatefuel19 said:
After doing some research and kicking my dog for causing the unknown usb device error repeatedly I found a semi solution.
Click to expand...
Click to collapse
don't kick the dog.
good tutorial.

[Links Included] Android Eclair 2.1 Beta Releases on i8000 by Almar and his dev team

FROYO IS OUT NOW!!! SEE HERE
FEATURES
Supported features in latest public beta release:
HARDWARE
Display & Touch screen
Hardware keys
Internal & External storage
Vibrator
FM radio
Sound & Audio output via 3.5mm jack
Proximity and Light sensors
Orientation (Accelometer), Magnetic (Compass) and Temperature sensors
CONNECTIVITY
Phone & messaging
Wifi
GSM data (GPRS/2G/3G/..)
USB (ADB)
GPS
SOFTWARE
Android 2.1 (Eclair)
Android market
Rooting
2D/3D acceleration (libs are not included due to legal issues)
Open-source patches: I8000 B7610 M715&M8400
OTHER FEATURES
Battery driver/charging
Brightness control/backlight
COMPATIBILITY ON OTHER PHONES
Omnia pro (B7610): wifi not working
Omnia pro (B7610): hardware keyboard not working fixed
Omnia pro (B7610): some hardware buttons not working fixed
Omnia pro (B7610): vibration not working fixed
T*Omnia II (M715): not working when not connected to USB fixed
T*Omnia II (M715): headphone plug problem fixed
T*Omnia II (M715): some hardware buttons not working fixed
T*Omnia II (M715): phone not working (>rev??)
Show Omnia (M8400): wifi not working fixed
Show Omnia (M8400): USB/headphone plug/hardware buttons problems fixed
Verizon Omnia II (I920): not working
FEATURES UNDER ACTIVE DEVELOPMENT
Camera's
Proximity sensor (only kernel support yet)
Light sensor (only kernel support yet)
Bluetooth (only kernel support yet)
I920: Beta support
FEATURES UNDER DEVELOPMENT
Android 2.2 (Froyo) {sleep bug}
Android 2.3 (Gingerbread) {slooooow and some Eclair features broken}
POSSIBLE FUTURE FEATURES
Android kernel and image build from github.com
TV-Out
B7610: wifi driver
I920: CDMA phone part
___________________________________________________________________
TUTORIALS, MODS, ADD-ONS
BETA 1 INSTALLATION TUTORIAL By Me, l3ong91, XDA
1. Backup the files on your microSD first.
2. Go to Start>Settings>Memory Settings>Storage Card and click Format.
3. Download any one of the files provided on http://o2droid.phj.hu/index_en.php file section.(you can download either 512 partition image or 1GB partition image)
4. Extract the files and put it in My Storage. (Attention: Copy only "o2Beta" folder and default.txt, ext2.tar, haret.exe, log.txt, and zImage to the root of my Storage) Look at attachments.
5. Open "o2Beta" Folder and run haret.exe
6. Wait for it to load and until it say something like reboot, the device will auto reboot so just leave it there.
7. It will boot up Windows Mobile again.
8. Then go to My Storage and click on haret.exe
9. This time it will boot again and after awhile you will see Android logo on the bootscreen.
10. After the Android 2.1 was booted, hold on the "Lock" button for 3-4 sec and
turn off the device. (It will boot up Windows Mobile again, or sometimes you will have to do it manually to turn on the device)
10. Now download and copy http://rapidshare.com/#!download|482l33|443140910|o2bupdate.tar.gz|1480 and http://87.229.73.80/zImage file to root of My Storage and overwrite it.
11. Then run the haret.exe from My Storage (not inside o2Beta folder).
12. This time it will bootup faster than the first time.
13. Yes...Android's dream come true on Omnia i8000
BETA 2 INSTALLATION TUTORIAL By Kapica, MoDaCo
1. Clean SD card of beta1
a) Clean format with SD Formatter, or
Use EASEUS Partition Master and format the EXT2 partition on SD card
2. Rename o2b2filesys.tar.gz to ext2.tar.gz
3. Copy ext2.tar.gz and new zImage to My Storage and overwrite
4. Go to O2Beta directory and run haret.exe
And thats it, u get beta2 installed, rest as usual...
To add 2D/3D rename tar.gz to o2b2update as devs said...
If you experience reboots I think its to lack od 2d/3d, open the 2d/3d o2update.tar.gz and copy system directory into ext2.tar with Total Commander, save archive, copy to My Storage, and try to install now.
BETA 2 INSTALLATION TUTORIAL (EASY ALTERNATIVE) By Me, l3ong91, XDA
1. Download the latest installation package as of 11/2/2011
2. Format SD Card again using Samsung Settings>Format.
3. Delete all the Beta 1 Folder and Beta 1 files in My Storage.(if you have previously installed Beta 1 on your phone)
4. Extract and copy all the files in Beta2 installation package to My Storage.
5. Download one of the 2D/3D driver links below and rename as o2b2update.tar.gz
6. Put it in My Storage.
7. As usual, run haret.exe from o2Beta folder.
8.Then after reboot, run haret.exe from root of My Storage.
2D/3D DRIVER DOWNLOADS
For Beta1 Installation
Download o2bupdate.tar.gz and place in "My Storage\o2bupdate.tar.gz" , this should stop the phone from freezing every 5 minutes:
For Beta2 Installation
Rename as o2b2update.tar.gz
http://rapidshare.com/#!download|482l3...ate.tar.gz|1480
http://www.filesonic.com/file/60103983/o2bupdate.tar.gz
TO ROOT BETA2 by turnado1979, MoDaCo
Download this and put it in root of My Storage
TO PREVENT PHONE FROM SLEEPING DEATH By slmz, MoDaCo
Settings>Wireless &network settings>Mobile networks> Tick "Use only 2G networks"
- 4% last for about 9 hs
BUTTON FIXES AND REMAPPING
Button fixes:
To wake up the phone with Hang up and Lock buttons only - by Rapid81
Menu button unlock policy fix - by ult_nrg
DUAL BOOT WIN-MO AND ANDROID ON OMNIA 2
1. Get Gen.Y DualBOOT from megaupload (http://www.megaupload.com/?d=HRPO9CC7)
2. Only use "Gen.Y DualBOOT WVGA v1.0.6.0 - Storage Card.cab" and delete other cabs.
3. Install cab on "Device Storage" (otherwise doesn't work)
4. Copy/move Haret.exe ,default.txt, zimage to root of SD card.
**If you want fastboot (no pushing OK in Haret) rename default.txt to startup.txt
GET LIVEWALLPAPER WORKING By Aafi-rocks, MoDaCo
1. Boot to windows and Connect your phone to PC in Mass Storage mode
2. Open ext2.tar.gz using 7-zip
3. Then go to below path ext2.tar.gz\ext2.tar\system\lib\
4.unzip the attached lib.zip file and copy all the 3 files here..
5.Then go to below path ext2.tar.gz\ext2.tar\system\app
6. Unzip the attached app.zip file and copy all the files here.. (you can also copy any other APK files for games and apps here, if you want to pre-install them)
7. Now close 7-zip and it will ask you if you want to update the archive.. click yes..
8. Now re-install Android..
Once Android is booted. On the home screen try changing the wallpaper and there you see the live Wallpaper option...Select the Live wallpaper of your choice and Njoy...!!
You can also do this without re-installing Android..
1. Explore your phone using Droid Explorer then navigate to system/lib and copy the files from the attached 'lib.zip' here..
2. Then using droid explorer install the APK files from the attached 'App.zip' file..
ADB INSTALLATION AND TUTORIAL By Rapid81, MoDaCo
1. First af all, you need to set the ports under Android.
To do that, write this to the phone: *#7284#
Then you need to select the followings:
UART -> Modem
USB -> PDA
After this, go to the Settings\Applications\Development and check the USB Debugging if it not checked already.
2. Download the Android SDK from here. Install (if you downloaded the installer) or unzip to a location where you'll easly found it. For example C:\android-sdk-windows.
3. Download Samsung KIES. Install it. It contains 2 of the 3 necessary drivers.
4. Download the SamsungADB.zip and unzip it somewhere, where you'll easly found it.
5. If the Android did not went to sleep after it started, then unplug from USB (if it plugged) and put to sleep with the Hangup button. After that, plug onto the USB. The Windows will install 2 of the 3 drivers automatically. The 3rd one will not be found. This will be the ADB driver. Go to the Device Manager and browse the driver (not just add the path to the search root, you need to select the driver yourself!!!) what you extracted from the SamsungADB.zip. Choose one of the followings:
Samsung Android Composite ADB Interface or ADB testing interface and install it.
If the Windows ask for a confirmation to install a not trusted driver, then say yes.
6. Press Windows+R and type into "cmd".
In the upcoming windows, navigate to the unzipped or installed Android SDK directory with the following command:
For example: "cd c:\android-sdk-windows"
In there, navigate to the "platform-tools" directory with this command:
"cd platform-tools"
7. This is where the party started.
Commands you can use:
adb devices -> If you see your device here, you did a good job.
adb shell -> console
In the console:
logcat -> List all android events/errors
cat /proc/kmsg -> kernel log
adb push filename folder -> Send file from Windows to android, to the specified folder
adb pull filename -> Receive file from Android to Windows
Backup all installed applications (rooting is necessary):
tar czvf /storage/App_backup.tzg /data/app* -> Backup
tar xzvf /storage/App_backup.tzg -> Restore
ADB Installation Guide on Omnia2Droid Google Source Code Page
http://code.google.com/p/omnia2droid/wiki/InstallAppsADB
___________________________________________________________________
EXTERNAL SITES, LINKS, AND PAGES
Beta Release Official Download Page: http://o2droid.phj.hu/index_en.php
Beta Release Source Code Page: http://o2droid.phj.hu/trac
Omnia2Droid Official Source Code Page: http://code.google.com/p/omnia2droid/
Almar's Twitter Account (INB2ENSECURITY): http://twitter.com/#!/INB2ENSECURITY
MoDaCo "Android on Omnia 2" Thread: http://www.modaco.com/content/i8000-omnia-ii-gsm-rom-discussion/322429/android-on-omnia-ii-i8000/
YouTube "Android 2.1 Eclair on Omnia 2" Video: http://www.youtube.com/watch?v=8khXDEOO96Y&feature=player_embedded
Source Code Repository Browser: http://o2droid.phj.hu/trac/browser
Omnia Pro B7610 Discussion Forum:http://www.modaco.com/content/b7610.../331432/android-tutorials-and-known-problems/
Verizon Omnia II(I920) Discussion Forum:http://www.modaco.com/index.php?showtopic=330325&view=getnewpost
___________________________________________________________________
LATEST NEWS & UPDATES
18/1/2011
Beta 1 (Minor Fix) Link: http://o2droid.phj.hu/index_en.php
19/1/2011
New Kernel (zImage) Sleep Issue Fixed Link: http://87.229.73.80/zImage
27/1/2011
Battery charge corrected, missing interface for redio signal level, powerstate,etc. was fixed. Put in root of My Storage and overwrite it. http://o2droid.phj.hu/o2droid.zip
30/1/2011
Script included for apps that needs ROOTED Android device: http://o2droid.phj.hu/suupdate.zip
31/1/2011
Working GSM data network. The o2droid.zip file contain the latest kernel,modules, patches and applications from Rapid and Voyteckst su correction.http://o2droid.phj.hu/o2droid.zip
9/2/2011
Sleep problem solved, Alarm function working, battery drain and percentage correction, upgrading from C4 to D1 the 6500 framework, more powerfull dalvik machine (Linpack 5.x) and all the usable corrections published. There are two version, a simple upgrade to the beta: o2bupdate.zip (just unzip to My Storage) and a new filesystem including all changes and rearranged file structure: o2b2filesys.zip (contains the filesystem as tar.gz and the kernel, must unpack and copy manually - no automatic install). The later one is the beta2 (this will be commiting to the SVN); there are some changes in the automatic updates when using the beta2 image to avoid the mistakes : the new automatic filenames are o2b2update.[tar.gz][sh]. Neither version contains the EGL libraries!http://o2droid.phj.hu/index_en.php
10/2/2011
Bugfix: the init dont allowed the GSM network to get DNS, dalvik vm problems. update it with o2b2update.tar.gz ( for beta2, if you use just the corrected beta, please rename it to o2bupdate.tar.gz). There is a strange error: within telephone conversation in approx.30 seconds the LCD blanks but also the sound muted - UNTIL NOT SOLVE, please use the Call Light application from Market!!!
11/2/2011
We have prepared Beta2 SD card installer (1024mb only). It includes latest update (2011-02-10). Download it http://87.229.73.80/beta2_1024.zip (it will wipe Your current installation). As always it doesn't contain 2D/3D libraries from Samsung (if You found them somewhere on the web put it before first boot to My Storage as o2b2update.tar.gz).
Note: There is still error, when within telephone conversation in approx.30 seconds the LCD blanks but also the sound muted - UNTIL NOT SOLVE, please use the Call Light application from Market!!!
3/3/2011
Updated kernel and modules with support for accelerometer, compass and light sensor, keylayout files for new kernel. Download it here . Install as always: replace zImage, put o2b2update.tar.gz, o2b2update.sh to My Storage. It will work on second boot (because old init.rc is executed first).
So now working things are:
Phone
WiFi
GPS
FM Radio
Market
Data connections (GPRS)
Sensors (only proximity sensor not yet)
2D/3D (Samsung not allowed to us to distribute the 2D/3D library binaries, so they are not included in the image).
Things which are working (low level tests), but without android support for now:
Bluetooth
Camera (there are some works to be done)
8/3/2011
To enable the automatic time update from the GSM there is a simple update script. The timeupdate.zip contains both o2update.sh and o2b2update.sh, copy the proper version (in the case of beta2 image: o2b2update.sh) to the root of the My Storage and haret... At first boot just updating the system database to use the telephone network time, so must reboot again to really use this setting and show the correct time.
9/3/2011
There was a rare condition when the SD card appeared sooner than the internal flash at boot - resulting the "No init found" error in kernel. The reason that the sdhci interfaces was not stricly assigned to an mmc device - the first sdhci was the mmc0. This is corrected now, so the s3c-sdhci.1 is the mmc0, .2 is the mmc1 and so on. The corresponding kernel ( svn version 100): zImage
19/3/2011
New kernel and modules (+ keylayout for those who didn't update it yet). Main changes are: fixes for SDHCI/MMC (ported from 2.6.32, external sd is much faster now), new battery profile (now percentage is more like in WM), compass calibration bugfix. Download here: kernel_19032011.zip.
___________________________________________________________________
UNOFFICIAL RELEASES
There is an ISO file, which was compiled by Mishatir, a MoDaCo member whom is dev team related, I think. I know this is a bit late....I'm sorry because I am unaware of this unofficial release too until recently read the comment on MoDaCo.
Alright to saves time, this is what it does. This ISO is a all-in-one package where it contains the updates and some modification (camera still not working yet though), but may or may not work with devices other than I8000, because currently I only tried out on my device.
From my experience, this ISO file is really amazing, no sleep of death issue, low battery consumption (dropped from 91% to 80% for 12+ hours) and pre-installed with few apps that you can try out.
Comment by MoDaCo member on the ISO
file
Short guide by Mishatir on ISO
Instructions:
1. Wipe out all Beta 1/2 files on your My Storage and format your SD card under Samsung Settings.
2. Download the ISO file here.
3. Unrar the files.
4. Connect your phone in WM mode and placed the "iso folder" under root of My Storage.
5. Run haret.exe in the ISO folder.
6. Android should bootup.
This ISO has few updates (kernel + modules.tar.gz) by Mishatir, if you want to update them,
- zImage --------> Replace zImage under ISO folder
- modules.tar.gz ----------> Rename to o2b2update.tar.gz and placed them under root of My Storage
To avoid Sleep of death , I use "Call End" key to lock and unlock the phone...Pressing" End key" seems to be easier and more responsive to unlock the screen.
Personally I don't recommend to update because since I update it I faced a few problems which eventually cause the Android not booting up....so try all this update at your own risk.
Anyway, this is a very nice and most stable release. Now I can use Android on my daily basis. For more questions, please leave a comment.
CREDITS
Credits to Almar and his dev team, I am not one of them. I'm here to spread this big news over XDA forum to inform every Omnia 2 users about this amazing breakthrough.

Just tried and its works great
Sent from my GT-I8000 using XDA App

problem
there is a problem when it is runing the linux help

Fantastic guys
Sent from my GT-I8000 using Tapatalk

killerkarara said:
there is a problem when it is runing the linux help
Click to expand...
Click to collapse
What problem you faced? Did you follow the instructions provided?

Here is some information for people who don't want to read the whole thread on Modaco.
Video of Beta on Omnia II by Rapid81:
http://www.youtube.com/watch?v=8khXDEOO96Y
Download beta release here:
http://o2droid.phj.hu/index_en.php
Download 2d/3d drivers and install here (you need these else above beta will freeze every 5 mins):
To install 2d/3d drivers download o2bupdate.tar.gz and place in "My Storage\o2bupdate.tar.gz" , this should stop the phone from freezing every 5 minutes:
http://rapidshare.com/#!download|482l3...ate.tar.gz|1480
http://www.filesonic.com/file/60103983/o2bupdate.tar.gz
To manage ext2 partitions from Windows PC and to correctly format your SD card:
To delete ext2 from Windows PC I use EASEUS Partition Master 6.5.2 Home Edition. It is freeware, and seems to work well. Then to format the micro SD I turn on mass storage in samsung settings, connect to PC and use the SD formatting tool 3.0 from sdcard.org. It uses FAT (not FAT32) and 32kb cluster sizes. I do quick format...
For more information and to report bugs:
http://code.google.com/p/omnia2droid/
Almar's (one of the developers) twitter:
http://twitter.com/INB2ENSECURITY
Big thread on Modaco:
http://www.modaco.com/content/i8000-omnia-ii-gsm-rom-discussion/322429/android-on-omnia-ii-i8000/

ummh when installing the heret.exe for the second time it stops for some reason

killerkarara said:
ummh when installing the heret.exe for the second time it stops for some reason
Click to expand...
Click to collapse
I had similar problems, stuck on the linux part. It said it couldn't mount mmcblk0p5, wich is the SDcard. I solved it by reformating my SDCARD in fat32 and it worked.

ive done step by step on what to do but its stuck on the linux boot screen last line displayed is jumping to heart and it stays there. any help would be awesome. ive installed everything to the my storage section on my phone

First of all: INCREDIBLE WORK!!! CONGRATULATIONS!!!
I've tested and it is working, but unfortunately it is freezing time after time...
I have tried this:
bobzero said:
Download 2d/3d drivers and install here (you need these else above beta will freeze every 5 mins):
To install 2d/3d drivers download o2bupdate.tar.gz and place in "My Storage\o2bupdate.tar.gz" , this should stop the phone from freezing every 5 minutes:
Click to expand...
Click to collapse
... but no difference

is this done using harnet?

yes it uses haret.

bobzero, there's a new updated kernel release by Almar...have you tried that out?

Is there any plan for supporting Omnia Pro (B7610)? Most of components are equally identical.

yes, it's working even better! battery drains slower now.

Soul_Master said:
Is there any plan for supporting Omnia Pro (B7610)? Most of components are equally identical.
Click to expand...
Click to collapse
definitely agree with the sentence

B7610 currently not officially supported by Almar's android
maverick_endit81 said:
definitely agree with the sentence
Click to expand...
Click to collapse
Currently Almar and his team only focuses on omnia i8000, perhaps there maybe a tiny possibilities that they will release a android for other samsung phone...try checking out forums and google
Below link is maybe useful to B7610 users: http://www.modaco.com/content/b7610...-android-on-b7610-thnks-to-devs/#entry1566239

i noticed some b7610 users on the modaco thread saying that it works, but with some additional glitches... wifi doesnt work, no menu button mapped...
try it out

bobzero said:
Video of Beta on Omnia II by Rapid81:
http://www.youtube.com/watch?v=8khXDEOO96Y
Click to expand...
Click to collapse
"This video contains content from Believe and Sony Music Entertainment, one or more of whom have blocked it in your country on copyright grounds."
EDIT - Ah. Been a while since I've tried, but you can use an anonymising proxy (I used http://www.hidemyass.com) to get around the restriction on YouTube.

Thanx Almar and other devs team..~~
just to share my method to make android working in my omnia..
format SD card thru samsung setting.. download and combine 1gb 18jan android + 19jan zImage update + 2d/3d patch together. after that I copy that bunch of files into omnia 'My Storage' root. (It content o2beta, default, ext.tar, haret, zImage)
first, run the haret.exe from 'My Storage/o2beta' !! . after press RUN wait till it finish with the partition. more or less than 10minute to get this done. after that, ur phone will auto restart.
after restart, run haret.exe from 'My Storage' root. !! press RUN...
Kabbooom... new life begin
I installed pro launcher n make it my default home screen n it run smoothly..
angry bird is playable too.. to make it short, Am AMAZED with this 1st beta..
just my 2 cents..

Collection of Guides and Tutorials for G9(Also, how to root and get custom rom)

Welcome
I wrote this post to help people get their Archos g9 tablet running custom roms. If you have any improvement ideas, please post them so I can make this better source of information.
List of content:
Post 1
What is recovery
What is SDE and how to install it
-Also SDE for 4.0.25
List of most commonly used roms
How to install custom roms
How to install offical rom
How to multiboot android 4.0 based roms
Installing 3G stick and Huawei modems support.
Post 2
Change symlinks/binds.
Installing ADB
Installing SuperCharger
Installing Chainfire3D
But why?
FAQ
Useful links
What is recovery​You can boot to recovery menu by holding volume- while booting your device. From recovery meny you can calibrate your touchscreen, wipe data and do this kind of stuff. Installing SDE creates new entry to recovery menu, called Special Developers Edition. There you can remove android kernel, flash new, export hdd and data. In recovery move up and down with volume + and -. Select by pressing power button
What is SDE and how to install it​SDE is shortened word from Special Developers Edition. After SDE is installed, your tablet is able to boot to official rom, recovery, and SDE rom. Most of the roms advice you to use "Remove android kernel" from SDE before you install kernel. When you remove your android kernel from there and install kernel from custom rom, your archos boots directly to custom rom. If you don't delete it, your device boots to official, but keeping volume - while booting gives you change to boot to SDE.
There are 3 guides how to install SDE. Official SDE watermarks your device for archos (there is no watermark on screen ), so they can detect you have installed SDE in some point. It stays even if you remove SDE. Official way is more safe. Also, it removes "only" software warranty. If your devices powerbutton, Usb-port or etc brokes, you can still send it to warranty. Link to official SDE install guide. Big thanks for Shano56.
Then there is unofficial, a bit more dangerous method. It doesn't watermark your device, but is more complicated. Guide tells that it's outdated, but it worked for me. I used official 4.0.4 version while installing. Link to the guide. Big thanks to Shano56.
4.0.25 Guide, by surdu_petru
surdu_petru said:
Hi !
I uninstalled SDE by mistake yesterday !
...so, you can enable (install) unofficially SDE following this path ( work 100% on firmware 4.0.25 ) :
On your tablet :
check on Settings-> Developer options -> USB debugging on !
connect USB cable ( PC to tablet )
On your PC :
> adb push 1 /data/local
> adb push 2 /data/local
> adb shell
$ chmod 0755 /data/local/*
$ ./data/local/1
$ exit
> adb reboot
> adb shell
$ ./data/local/2
$ exit
> adb reboot
> adb push zimage /data/local/tmp
> adb push initrd.cpio.lzma /data/local/tmp
> adb push abcbox /data/local/tmp
> adb shell chmod 755 /data/local/tmp/abcbox
> adb shell /data/local/tmp/abcbox kd_flasher -k /data/local/tmp/zimage -i /data/local/tmp/initrd.cpio.lzma
( now you have installed unofficially SDE ! )
Flash Root version or other Custom Rom :
> adb reboot
> adb shell rm /data/local.prop
> adb push archos.ext4(.update) /mnt/storage
Go to SDE -> ( check "Reboot" on power off menu , and after a while press & keep volume down until you see SDE menu !)
Go to Recovery System -> Developer Edition Menu -> Remove Android Kernel -> I Undestand -> OK -> Developer Edition Menu -> Flash Kernel & Initramfs -> copy here zImage and initramfs.cpio.lzo appropriate archos.ext4(.update) -> OK -> wait to boot !
Now you have Rot version installed !
Here you will find the necessary files : Enable_SDE.zip
Click to expand...
Click to collapse
List of most commonly used roms​These roms are most commonly used. Most of them are still being developed. I also included link to rooted official honeycomb, because some people have better touchscreen responsibility with it.
ParanoidAndroid 3
Cyanogenmod 10, 4.2 mockup
Cyanogenmod 10
AOKP ROM
[email protected]
Clean_Slim&Fast(Based on official 4.0.25!)
Ubuntu. This requires special kernel, which is compatible with official android 4.0.4Overclockable stock rom
Early CM9
Stock ICS rom with root & busybox
Stock honeycomb with root. (FYI, kernel requires renaming while installing)
How to install custom roms​Custom roms have different installing methods, but basic idea is same. You move image file with specified name to specified location.
When coming from stock rom or whengoing to stock rom:
CyanogenMod 10, AOKP, CyanogenMod 9
surdu_petru said:
Installation : Now should be work on all devices Gen9 !!!
...connect USB cable to PC and ( you need to use a Rom with root access ) :
> adb shell
# stop
# rm -rf data/*
# mkdir data/local
# mkdir data/media
# exit
> adb push archos.ext4 /mnt/storage ( need to wait about ~150 seconds ) !
> at the same time do : adb reboot & press and keep volume down ; in SDE -> DEM-> Remove Android Kernel ( if exist ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.gz -> OK -> wait to reboot !
Click to expand...
Click to collapse
[email protected], Ubuntu, Root 4.0.7 Clean_Slim&Fast
surdu_petru said:
Install :
- copy archos.ext4.update(archos.ext4 in case of Clean_Slim&Fast) in /mnt/storage/ , you can use this command > adb push archos.ext4.update(remove .update if Clean_Slim&Fast) /mnt/storage/
- go to SDE -> Developer Edition Menu -> ( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- after everything was installed - please reboot your device !
Click to expand...
Click to collapse
Honeycomb
Install like Cyanogenmod and AOKP and others, but rename initramfs.cpio.gz to initramfs.cpio.lzo
How to install official rom​Download official 4.0.7 rom from here.
Now boot to recovery (hold volume- while booting) and choose update firmware.
Now there should be noew drive in your pc. Drop the downloaded firmware_archos_it4.aos to there and press ok in recovery. Keep usb plugged in while installing. It should take around 30 seconds to 2 minutes. Now choose ok again. your tablet should now reboot to stock rom.
4.0.24 Official is owrking on some devices, but because it won't work on all, i won't cover it here(yet)
How to multiboot android 4.0 based roms​Install modified initfram from this topic. Use the zimage from the rom you want to multiboot. AFAIK you can multiboot with following combos:
[email protected], Ubuntu (download newer kernel from later pages.), Root 4.0.7
and
AOKP, CyanogenMod 9.
You cant use [email protected] and AOKP because they do not use same kind of data. That means that after you have run first rom, the second will bootloop. That is also why it requires wiping data when changing from stock to aokp and vise versa.
Detailed:
Download dmenu-0.3a.zip, and extract initframfs to desktop. Then download [email protected] and stock 4.0.7 rooted. Extract Image files and zimage from either one of the roms. Now just instal like described in earlier section, while using initframfs from multiboot and kernel from other rom.
Installing 3G stick and Huawei modems support. ​
Trevd made a package to add 3G stick and extra Huawei modems work for AOKP and generally all ICS ROMs. This guy is awesome because he also made some Huawei modems work.
trevd said:
Hi surdu_petru and AOKP fans.
Great work as always, It's not a rom i'll ever use but It's the first time I've loaded an AOKP Rom, I like notification layout, I'll be having that away for my own personal rom Anyway I was more just passing through and noticed 3G was not working yet. As seen as though that seems to be my speciality and preoccupation/addiction for the last 9 months I thought I do something to remedy that situation for you.
Here's an hotfile link to download the update [ 3g-archos-aopk.7z ] this should contain everything you need to get the Archos 3G Dongle, just for ****s and giggles as a extra bonus i've also included the huawei support file as well :good:
Installation:
From a command prompt / bash terminal
Code:
7z x 3g-archos-aopk.7z
adb push 3g /
adb shell reboot_into sde
extracting the 3g-archos-aopk.7z will give youu a 3g directory in you current directory, we then push the contents of the 3g directory to the root direcotry on the device. This operation is recursive.
Have Fun!
What follows is a detailed explanation of what files and modifications are required to add 3G support.
Archos 3G Stick
The changes / additions to add this functionality breaks down like this ; The following required binary's were on the device already:
** /lib/modules/hso.ko is insmod'd by the device specific init file /etc/init/init..rc
Code:
/lib/modules/hso.ko[B]**[/B]
/usr/bin/usb_modeswitch
/system/lib/libtcl-ril.so
/system/bin/rild
/system/bin/pppd
/system/xbin/chat
/etc/ppp/init_pppd_datakey
/etc/ppp/ip-up-datakey
/etc/ppp/ip-down-datakey
/etc/ppp/peers/datakey
/etc/chatscripts/datakey_start
/etc/chatscripts/datakey_stop
/etc/usb_modeswitch/1bbb_f000
The following required services were already defined in the device specific init.rc's located in /etc/init/init..rc ,
*** switch_ms_3g defined by /etc/init/init.archos.rc
Code:
service service switch_ms_to_3g[B]***[/B]
service pppd_secrets
service pppd_datakey
service ril-daemon
So what's missing? you may ask as this pretty much is everything that is needed by the Archos 3G Stick.
Standard Archos Roms use the UsbKeyManager.apk system service to start the switch_ms_to_3g and ril-daemon service's. I replace that with my own ueventd handling native service and add an additional to configuration file keep everything clean
Code:
/system/bin/hotplugd
/init.dongle.rc
I've added the following line to the top of the /init.rc
Code:
import init.dongle.rc
All that is left to do now is enable mobile networks on the rom. I used apktool to decompile the /system/framework/framework-res.apk and change the following values
res/values/bools.xml
Code:
true
true
res/values/arrays.xml
Code:
wifi,1,1,1,-1,true
mobile,0,0,0,-1,true
mobile_mms,2,0,2,60000,true
mobile_supl,3,0,2,60000,true
mobile_hipri,5,0,3,60000,true
mobile_fota,10,0,2,60000,true
mobile_ims,11,0,2,60000,true
mobile_cbs,12,0,2,60000,true
wifi_p2p,13,1,0,-1,true
"1,1"
"0,1"
"7,1"
"9,1"
res/values/strings.xml
Code:
ppp1
Huawei Support
The extend this functionality further I added the following files
Code:
/etc/ppp/init_pppd_gprs
/etc/ppp/ip-up-gprs
/etc/ppp/ip-down-gprs
/etc/ppp/peers/gprs
/etc/chatscripts/gprs_start
/etc/chatscripts/gprs_stop
/etc/usb_modeswitch/ [ numerous configurations files ]
/lib/modules/usb_wwan.ko
/lib/modules/option.ko
/system/lib/libhuaweigeneric-ril.so
We also need to chmod 6755 /system/bin/pppd but that is handled/checked in the /init.dongle.rc so there is no need to do that manually
Click to expand...
Click to collapse

Change symlinks/binds​Trevd wrote guide to let people know how to change binds. That way you can move large folders, like Gameloft games and navigator files to ExternalSD, saving InternalSD space.
trevd said:
If you after freeing up space, it is still possible with a bit of hacking voodoo . There are 2 ways I know of in fact.
METHOD 1 - SDCARD SERVICE
you can point the /storage ( /mnt/storage in reality ) to any directory you like. I've currently got mine pointing to an multi partitioned external 32gb sdcard. :0 all you need to do is change the sdcard service in the /etc/init/init.A101S.rc,
Currently it mounts /data/media to /mnt/storage, if you have an external sdcard card handy, try this as a quick and dirty test
From a terminal emulator or adb shell run the following commands
Code:
stop sdcard ;
sdcard /mnt/sdcard 1000 1015 &
ls /storage
You will now see that the external sdcard can be access through /storage. to kill the test run
Code:
pkill -9 sdcard
start sdcard
Everything should be back to normal. As I mentioned to make a more permanent change edit the following line in the /etc/init/init.A101S.rc
Code:
service sdcard /system/bin/sdcard /data/media 1000 1015
METHOD 2 - MOUNT BIND
The other, perhaps more straight forward method uses the bind argument on the mount to command to "mount an already visible filesystem elsewhere" .
In the example I'll bind the external sdcard to a directory in the internal storage
use the terminal emulator or adb once again to execute the following commands
Code:
mkdir /storage/sdcard
mount --bind /mnt/sdcard /storage/sdcard
To make this more parmanent, I would probably create a wrapper shell script for the sdcard service to make sure it all gets started together, that's just my preference, As we say in trade ( or maybe it's a saying i've just made up :silly: ) ; "there's more than one way to mount a file system!"
In Summary: I would go with method 2 as this effectively achieves the desired effect off "symlinking" an external directory in the /storage
Cheers
Click to expand...
Click to collapse
Installing ADB​ADB comes from word android development bridge, and it allows you to debug, move files and get shell access to your tablet.
Archos said:
First make sure you are running the latest ARCHOS firmware. Connecting by this method will give you user shell privileges. Learn more to know how to use ADB on Windows, Mac or Linux operating system:
Go to the Android SDK page and download the latest SDK for your operating system.
For Windows users only: Install the Archos ADB USB Driver for Windows. The driver is available at the ARCHOS support ftp (ftp://support.archos.com). Instructions how to install the driver are available at USB Driver for Windows site on Android Developers.
Add Archos vendor ID (0x0e79) to adb_usb.ini in .android folder in your home directory:
Windows: echo 0x0e79 >> "%USERPROFILE%\.android\adb_usb.ini"
Macos: echo "0x0e79" >> ~/.android/adb_usb.ini
Linux: echo "0x0e79" >> ~/.android/adb_usb.ini
For Linux users only: You need to add a udev rule if ADB only works as root:
Create a file /etc/udev/rules.d/51-android.rules that contains the following lines:
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device",
ENV{PRODUCT}=="e79/*", MODE="0666"
SUBSYSTEM=="usb", SYSFS{idVendor}=="e79", MODE="0666"
Make the rule known to udev with the following command:
udevadm control --reload-rules (or udevcontrol reload_rules on older systems)
Click to expand...
Click to collapse
Running adb from anywhere
steviewevie said:
We need to update your Path variable. This lets you run adb on your PC from a command window no matter which directory you are in (which makes things a lot easier). If you don't setup your Path, then every time you want to run adb, you will either have to type the whole long pathname where you put adb, or cd to where you've put adb and run it from there (which could be inconvenient if you are transferring files to/from your phone).
On your PC, right-click on "My Computer" and select "Properties". (on Vista, click on "Change Settings"). Go to the "Advanced" tab, then select "Environment Variables". Find the "Path" variable in the list of variables that it shows (you might need to scroll), and then double-click on that entry to edit it. Add the full path of the "tools" and "platform-tools" folders of the SDK to your path. e.g. if the SDK has been installed in "c:\Program Files\android-sdk-windows", then add to your Path "c:\Program Files\android-sdk-windows\tools;c:\Program Files\android-sdk-windows\platform-tools" (Please Note - don't put any spaces between the semi-colon and pathname, otherwise it won't work !)
Click to expand...
Click to collapse
sources:Archos, steviewevie
Installing Supercharger​Supercharger is a multiscript which makes the tablet work much better. Its created by Zeppelinrox, and its official topic is here. We are using also script manager in this guide. That way we can make MinFrees and OOM apply.
In this guide we'll use Apex launcher which is moved to /system/app for our default launcher.
We are also using adb to configure and run Supercharger.
Because stock launcher is odexed and i am not writing how to deodex, we are not using it.
First make sure apex is your default launcher. This can be tested by pressing home button in homescreen.
If it show mini previews of your homescreens, apex is your default launcher.
Now lets begin:
go to here and download newest file. At
the time of writing, it is Update 9_RC11_test6. Move it to your adb folder.
Then open commandline. This can be opened with windowskey + R and writing cmd. Navigate
to adb folder using cd command. I have made adb to run from anywhere, so i just navigate to the downloaded file.
Now use command "adb push v6* /mnt/sdcard" then use command "adb shell". Now you should have
shell access to your tablet. Now do following
su
cd /mnt/sdcard
sh V6* /remember capital V)
Supercharger script should open now. After presentation, script should print after telling your busybox version
"com.anddoes.launcher is the home launcher!" Now continue install. Supercharger will tell you everything you need to know.
So just follow the instructions. After choosing kernel tweak, you get bunch of permission denieds.
We can't help them, so lets just continue.I recommend on using all the tweaks that you can,
but it is your choise do you want to use or not. After all the selections are selected and your in
driver panel, choose number 32. It'll reboot your tablet and wipe dalvik. When the tablet has booted, lets run supercharger script again.
So write these again:
su
cd /mnt/sdcard
sh V6_Super*
After getting to drivers panel, you notice that minfrees are not in effect, and neither is OOM Grouping Fix BUT if they are, you can ignore this step..
Install script manager from market and open it. Give it root permissions and navigate to /system/etc/init.d
press SS99SuperCharger to open its settings. Now press the Su button and then Boot button.
Now press save, and then click it's name which appers to right. Then press back button and reboot.
Now Minfrees should work, and OOM too.
Now you can run 22 if you want to try it. Supercharger is now fully working.
Installing Chainfire3D​
Chainfire said:
Chainfire3D is an intermediary OpenGL driver. What does that mean? It means that Chainfire3D sits between your apps and the graphics drivers, and can intercept and/or change commands between the two. It has some built-in functions, and can be further extended with plugins to provide extra functionality.
Click to expand...
Click to collapse
It is very useful for running gameloft games and other games too. I recommend buying it. There are some plugin for it, but i'm not going to tell you about it now.Play store link.
After downloading it, open it and choose "Chainfire3D Driver" and from there "install". Then confirm it and tablet should reboot. Now reopen it and choose "Default opengl setting". From there you can tweak 3D performance if some games lag. Also, if you install plugin, there you can apply them. I personally use "reduce texture quality".
But why?​
This section is to point few reason why to follow these guides. Lets begin:
SDE
Well, you should install this if you want to customize your tablet. If your happy with your tablet running stock, you don't need this, or any other guides.
Custom roms/kernels
Custom roms allow you to use root, they make your tablet faster and add extra functionality. This "functionality" includes: Overclock, run init.d scripts, enable both cores with all governors, root and themes. The benefits are not limited to these, but I could name this quickly. If you wan't to try something which is close to stock, but still has root and some custom functionalities, i would recommend deodexed 4.0.7, or [email protected]
Install official roms
These roms do not require SDE, but will not include root or anything fun . Updating your official rom has many benefits. They include fixes and boost your tablets performance.
Multiboot
Multibooting allows you to have 2 or more roms, which you can choose which to boot on startup. I would recommend this if you want to test functions with root, but still have "backup plan" if testing rom renders unbootable.
3G support
Basicly this allowes some extra huawei 3G sticks to work. There is no list of working stick, you just have to try and hope.
Change symlinks/binds
These allow you to "move" eg. gameloft games to external sd, and allow you to acces your externalsd via internalsd folder.. That way your gamedata does not eat the valuable internalsd space.
ADB
You need this to transfer rom to your tablet. It is also required when you sent logcat reports to help remove bugs.
SuperCharger
This makes your tablet work more fluid. I personally install supercharger to all my android devices. It removes need for task killer, and makes the device work better. Everyone has different results, and it costs only time to install, so i would recommend installing it.
Chainfire3D
This tool allows you to play games made for other GPUs and it can tweak application graphics. You can make the game look worse, but run better or adjust the grphics for a bit higher, so the game looks nicer.
FAQ[/CENTER]
These questions and answers are collected from various sources.
surdu_petru said:
How to activate second core for all govenors in surdu_petrus roms?
To activate the second core, you need the following steps :
- copy /system/S1tweak in /system/etc/init.d/ or ( > adb shell ; # cp /system/S1tweak /system/etc/init.d ; # exit )
- open No-frills CPU Control :
- choose the desired Governor ( but not hotplug ) !
- choose the desired frequency , but not overclocked ! ( when the device will boot - will open with the selected frequency , so please choose max. frequency = your max. stock frequency )
- check "Apply on boot"
- check "Applay"
- check allow if superuser asked permission
- reboot your device !
- Now , both core will be used in any selected Governor ( other than hotplug ! ).
Click to expand...
Click to collapse
What modems does Trevds mod support?
trevd said:
The theoretical list of supportted devices come from those devices supportted by usb_wwan and option kernelp drivers.
Click to expand...
Click to collapse
Shano56 said:
Can I just drag the .zip file to the RAMDISK that appears when I flash zImage and initramfs?
No! Archos recovery cannot read ZIP files. You must first EXTRACT, then copy the contents of the extracted folder. NOT the folder itself. This means you will have two files on the RAMDISK, and no additional folders. If you don't know what a RAMDISK is, try Google or Wikipedia. If you get stuck in a boot loop because you forgot to extract archos.update.ext4 or drive.zip, you must follow the instructions below.
Help! I am stuck in a bootloop! Archos splash screen appears and keeps rebooting. I messed up when I was rooting, and now android will not boot! I accidentally formatted my device, and now I cannot boot into android.
This is a simple mistake and in 99% of cases it is easy to fix. Follow these steps:
Step 1: Download official Archos G9 firmware for ALL G9 tablets (aos file) HERE
Step 2: Boot into recovery turning your device off and then holding volume down + power at the same time
Step 3: Choose "Update Firmware"
Step 4: Connect USB cable to computer and tablet
Step 5: A removable device should appear (RAMDISK), copy the file you just download straight to that drive
Step 6: Press the power button once the file is done copying. DO NOT UNPLUG your device until it has finished updating and has booted back into android.
If you did not format your tablet or delete any personal media, your files should be uneffected.
Will I lose SDE menu if I update my tablet with official AOS or OTA update
As of the latest update (4.0.6) no official update from Archos has removed SDE menu. You should be fine, and your SDE menu should remain untouched.
Click to expand...
Click to collapse
[/quote]
Useful links​Some link i consider useful are here:
G9 101 16GB 1.5GHz Teardown! (Lots of Images)
XBMC for android
Want faster GPS? Follow this guide

3th just i remember something to add. Comment and give me some feedback. It helps me to make this topic useful for beginners, and for those who seek info.

I meant to edit first post... well, this works as 4th reserved then.

Hi there!
You have been busy! Thanks for kind words, Just an heads up really, you might want to update your post as I deleted the usb-modem-binary-redist github repo yesterday as it was a bit too clever for it's own good and I think a bit of abuse/misuse of the concept branching! Just because you can, doesn't always mean you should LOL, with that in mind I'd probably advise against linking to my github repos as they don't stay static for very long. I generally leave the hotfile links up "forever" so link away with them.
The Information and files included in the new AOKP post about 3G Dongles should be good across all ICS roms. Finally allow me to throw out this mini guide I wrote a while back which explains an "app-free" method of freeing up space, I noticed there been a bit of discussion about it, Using an app just seem like overkill, but that's just me I suppose.
Anyway good work. :good:

trevd said:
Hi there!
You have been busy! Thanks for kind words, Just an heads up really, you might want to update your post as I deleted the usb-modem-binary-redist github repo yesterday as it was a bit too clever for it's own good and I think a bit of abuse/misuse of the concept branching! Just because you can, doesn't always mean you should LOL, with that in mind I'd probably advise against linking to my github repos as they don't stay static for very long. I generally leave the hotfile links up "forever" so link away with them.
The Information and files included in the new AOKP post about 3G Dongles should be good across all ICS roms. Finally allow me to throw out this mini guide I wrote a while back which explains an "app-free" method of freeing up space, I noticed there been a bit of discussion about it, Using an app just seem like overkill, but that's just me I suppose.
Anyway good work. :good:
Click to expand...
Click to collapse
Thanks for the feedback.
I removed the part which had github link, and modified the AOKP section to tell it works with all ICS ROMs.
I'll included your mini guide. I might even have some use for it myself...
Sent from my GT-I9100 using xda app-developers app

help me for multi boot ubuntu ics bleuv03
hello I want to know is it possible to bleuv03 ics and multi boot with ubuntu and it is possible that what zImage and iniframts I should use.
desoler for my english I'm french and I go through a translator thank you.

muti642 said:
hello I want to know is it possible to bleuv03 ics and multi boot with ubuntu and it is possible that what zImage and iniframts I should use.
desoler for my english I'm french and I go through a translator thank you.
Click to expand...
Click to collapse
Download zimage, initfram and Ubuntu image from
http://forum.xda-developers.com/showthread.php?p=26000199
There is a high chance that touchscreen will not work if you have 101 G9 model in Ubuntu. You can still use USB OTG devices like mouse normally.
Sent from my GT-I9100 using xda app-developers app

julle131 said:
Download zimage, initfram and Ubuntu image from
http://forum.xda-developers.com/showthread.php?p=26000199
There is a high chance that touchscreen will not work if you have 101 G9 model in Ubuntu. You can still use USB OTG devices like mouse normally.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
thank you for answered. j've already managed to install ubuntu and I had no problem touch by cons I Can not get a dual boot ubuntu and bleuv03 ics. I shall therefore understands the multi boot flash I then I put two images but in the memory of the tablet and then I flash the kernel you gave me quote above and I should be able to boot on 2 rom and bleuv03 ubuntu?

muti642 said:
thank you for answered. j've already managed to install ubuntu and I had no problem touch by cons I Can not get a dual boot ubuntu and bleuv03 ics. I shall therefore understands the multi boot flash I then I put two images but in the memory of the tablet and then I flash the kernel you gave me quote above and I should be able to boot on 2 rom and bleuv03 ubuntu?
Click to expand...
Click to collapse
Download the this kernel https://docs.google.com/file/d/0BxgjsI4pMALheHZoVUdIYnVTN28/edit
It can dualboot [email protected] v03. If the ubuntu does not boot after flashing it, download this ubuntu image:
https://docs.google.com/file/d/0BxgjsI4pMALhVl9kek9SSFpKb2M/edit

THX
julle131 said:
Download the this kernel https://docs.google.com/file/d/0BxgjsI4pMALheHZoVUdIYnVTN28/edit
It can dualboot [email protected] v03. If the ubuntu does not boot after flashing it, download this ubuntu image:
https://docs.google.com/file/d/0BxgjsI4pMALhVl9kek9SSFpKb2M/edit
Click to expand...
Click to collapse
Thank you thanks you it works well, I do not use the right kernel or the good image of ubuntu. ps: the touchscreen does not work but using the OTG is perfect.
thank you again julie :good:

sorry for ignorance but for root i need to have adb sdk for do this steps??
"- copy archos.ext4.update to /mnt/storage/ , you can use this command > adb push archos.ext4.update /mnt/storage/
- go to SDE -> Developer Edition Menu ->( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- the first boot may be longer ! "
If my archos is untoot how i use this comand? with adb sdk ?!

solrakk6 said:
sorry for ignorance but for root i need to have adb sdk for do this steps??
"- copy archos.ext4.update to /mnt/storage/ , you can use this command > adb push archos.ext4.update /mnt/storage/
- go to SDE -> Developer Edition Menu ->( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- the first boot may be longer ! "
If my archos is untoot how i use this comand? with adb sdk ?!
Click to expand...
Click to collapse
Yes, you must use adb. I assume your "untoot" means unrooted. You use cd command to navigate to your adb folder and from there to platform-tools. Also drop archos.ext4.update to there. Then use the adb command to move the file. Moving file to that location does not require root.
Sent from my GT-I9100 using xda app-developers app

Archos G9 101 HD
Hi Surdu,
I tried to update after SDE install and then accidentally dont know what happened have lost android on my tablet G9 101 HD. I cant see my hd on pc and is not booting but only can see the rom image which appears on boot without animation. How can I transfer the update archos.ext4 into Internal Storage without seeing the drive on PC win 7. I have made mistake in steps may be.
Please help.

hondacity said:
Hi Surdu,
I tried to update after SDE install and then accidentally dont know what happened have lost android on my tablet G9 101 HD. I cant see my hd on pc and is not booting but only can see the rom image which appears on boot without animation. How can I transfer the update archos.ext4 into Internal Storage without seeing the drive on PC win 7. I have made mistake in steps may be.
Please help.
Click to expand...
Click to collapse
Go to the recovery menu, choose update firmware. When it prompts you to connect tablet to pc, cobbect it, but to different usb port than last time. That should cause the pc to reinstall usb drivers for the tablet.
Sent from my GT-I9100 using xda app-developers app

Archos G9 101 HD
julle131 said:
Go to the recovery menu, choose update firmware. When it prompts you to connect tablet to pc, cobbect it, but to different usb port than last time. That should cause the pc to reinstall usb drivers for the tablet.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks, for so fast reply Dear...
I did the same as you advised and a drive with name ending with "REC" with a capacity of 299 MB appeared. I tried to copy the Surdu's Deoedex update but it has more weight in MBS about 390. So it could not. I tried original Archos ROM with weight of 186 MB and it copied. Started update but returned with an error "Update failed: (221)".....
Please advise.
Note: I also tried in SDE menu to export data drive and got a drive 1.48 GB which I formated from win 7 and succeded in copying Stock and Surdu's ROMs one by one but always failed to get android and it always say failed update. Still get unanimated Archos logo on startup with no further bootup.

hondacity said:
Thanks, for so fast reply Dear...
I did the same as you advised and a drive with name ending with "REC" with a capacity of 299 MB appeared. I tried to copy the Surdu's Deoedex update but it has more weight in MBS about 390. So it could not. I tried original Archos ROM with weight of 186 MB and it copied. Started update but returned with an error "Update failed: (221)".....
Please advise.
Note: I also tried in SDE menu to export data drive and got a drive 1.48 GB which I formated from win 7 and succeded in copying Stock and Surdu's ROMs one by one but always failed to get android and it always say failed update. Still get unanimated Archos logo on startup with no further bootup.
Click to expand...
Click to collapse
Okay... So you have sde installed? Good. First, let's get the official firmware working. Download the latest official ROM from archos:
http://update.archos.com/9/gen9/gen9_4.0.26/firmware_archos_it4.aos
Drop this to the 300mb partition called REC. Then press power and let it install.
Now follow the install guide o. The ROM you want to install
Sent from my GT-I9100 using xda app-developers app

Archos G9 101 HD
julle131 said:
Okay... So you have sde installed? Good. First, let's get the official firmware working. Download the latest official ROM from archos:
Drop this to the 300mb partition called REC. Then press power and let it install.
Now follow the install guide o. The ROM you want to install
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks Julle..But Now I understand that official ROM is not installing because of unofficial kernel flash I have already installed and had flushed original one. I think if I get original kernel then I can arrive to original Android ICS which you have mentioned. Please advise if you have any address of original kernel for "firmware_archos_it4.aos".
THANKS and Best Regards...
Further to my above thread...I found the stock kernel and flashed it but still after installing kernel and then original firmware, its giving same error of update failed (221).
Please advise if any remedy you prefer.
Regards...
Hi Julle,
Sorry too many threads from me but very much annoyed but sure thanks Dear for your kind help.
On export of HDD from "Repair system" menu...>>>> A drive appeared in PC but not opening as it says " Insert disk into drive". I think it is the problem which is preventing from installing the AOS file to run Android.
Please advise.
Regards,

hondacity said:
Thanks Julle..But Now I understand that official ROM is not installing because of unofficial kernel flash I have already installed and had flushed original one. I think if I get original kernel then I can arrive to original Android ICS which you have mentioned. Please advise if you have any address of original kernel for "firmware_archos_it4.aos".
THANKS and Best Regards...
Further to my above thread...I found the stock kernel and flashed it but still after installing kernel and then original firmware, its giving same error of update failed (221).
Please advise if any remedy you prefer.
Regards...
Hi Julle,
Sorry too many threads from me but very much annoyed but sure thanks Dear for your kind help.
On export of HDD from "Repair system" menu...>>>> A drive appeared in PC but not opening as it says " Insert disk into drive". I think it is the problem which is preventing from installing the AOS file to run Android.
Please advise.
Regards,
Click to expand...
Click to collapse
To install the update I linked, you shouldn't need any kernel changes. Removing kernel from SDE removes the official kernel, but that does not prevent installing official update. Also installing custom kernel will not prevent installing official rom.
I just do not understand why you get the 221 error as most of the people get it when that have incorrect file there or already have newer stock ROM installed. It is possible that your windows format broke it, because windows formats it to wrong format. You should never format any other than sdcards in windows. You could try the format system in recovery and choosing reformat device. After that install the official update I linked.
Sent from my GT-I9100 using xda app-developers app

Archos G9 101 HD
julle131 said:
To install the update I linked, you shouldn't need any kernel changes. Removing kernel from SDE removes the official kernel, but that does not prevent installing official update. Also installing custom kernel will not prevent installing official rom.
I just do not understand why you get the 221 error as most of the people get it when that have incorrect file there or already have newer stock ROM installed. It is possible that your windows format broke it, because windows formats it to wrong format. You should never format any other than sdcards in windows. You could try the format system in recovery and choosing reformat device. After that install the official update I linked.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks again Dear,
I applied same as you say but ending on same 221 error. Any thoughts please.
Best regards.:crying:

[Tutorial] Install Windows 10 for ARM32 on your Surface RT

This guide is made based on my experience and based on the other thread: "[Tutorial] Install Windows 10 for ARM32 on your Surface 2".
It is not complete yet. I will be adding files and more clear instructions slowly.
Do this at your own risk. Your device may be bricked. I am still not sure if the SecureBoot fix should be executed on 8.0 or 8.1
# How to Install Windows 10 on the Surface RT #
2020/02/16 kephax
Download complete tools: [will upload]
Download temporary link in attachments
## 0. Restore Windows 8.1
1. Turn the Surface Off
2. Insert this USB stick in the Surface
3. Press Volume Down and Power
4. The Recovery menu will start
5. Troubleshoot > Advanced Options > Command Prompt
6. Type: "restore.cmd" (this will whipe the whole disk, repartition it and install the Windows 8.1 image) (this will take a while)
## 1. Unlock Secure boot ##
1. Run Disable_UAC.reg
2. Start > Regedit > HKEY_LOCAL_MACHINE\BCD00000000" > Select "BCD00000000" > Click on file and select "unload hive"
3. Copy SecureBoot to Desktop > Open it > Run "InstallPolicy.cmd"
4. Restart
5. Start > cmd (as Adminstrator) > PostInstallPolicy.cmd
6. Restart
## 2. Install Windows 10 ##
If you don't have a message "Secure boot" in the bottom right corner then retry step 1
1. Turn the Surface Off
2. Insert this USB stick in the Surface
3. Press Volume Down and Power
4. The Recovery menu will start
5. Troubleshoot > Advanced Options > Command Prompt
6. Type: "script.cmd" (this will whipe the whole disk, repartition it and install the Windows 10 image) (this will take a while)
7. When restarting you will get an error popup: Press SHIFT+F10
8. Type Regedit and go to KEY_Local machine/SYSTEM/Setup/Status/ChildCompletion > setup.exe > Modify the value to "3"
9. Restart
### 2.1. How to activate Windows
1. Powershell
slmgr.vbs /upk
slmgr /ipk NPPR9-FWDCX-D2C8J-H872K-2YT43
slmgr /skms kms.03k.org
slmgr /ato
slmgr /skms zhang.yt
### 2.2 Install runtime
1. Copy APPX1 from Recovery USB to Desktop
2. Desktop\APPX1\APPX1.ps1 > Right click > Run as Administrator
3. Restart
4. Desktop\APPX1\AppxBundle.ps1 > Right click > Run as Administrator
5. Restart
6. Install:
Microsoft.windowsStore.appxbundle
Microsoft.NET.Native.Framework.1.1.appx
Microsoft.NET.Native.Runtime.1.1.appx
## 3. After installation ##
### How to remove Expired version popup ###
1. Go to C:\Windows\System32
2. Right click on LogonUI.exe > Properties > Security > Advanced
3. Ower > Change
4. Enter your username > Check Names
5. Close all dialog boxes
6. Now rename the file to LogonUIbak.exe
### How to change the language to English (and remove chinese) ###
Start > Settings > Time & Language > Region & Language
Remove chinese and set English as Default
### How to install uBlock Origin on Edge ###
1. Download this:
2. Edge > about:flags
3. Select: "Enable extensions developer features"
4. Select the "..." > Extensions > Load Extension
5. Select the folder with uBlock Origin (this should be on the Surface itself)
### How to install UWP applications ###
1. Find your application here:
https://www.microsoft.com/en-us/store/b/home
2. Copy the URL and copy it here:
https://store.rg-adguard.net/7
3. You will need to find here the .appxbundle ARM and sometimes also the dependencies. Sometimes when you download the file it does not have the extension, so rename the file to .appx in the end.
4. Install first the dependencies then the application on the Surface RT
## 4. Pictures

Dumb question......I been reading the other post in regards to installing Windows 10 on the other surface 2..... Would I have to follow this tutorial or the one for the surface 2 if I have a surface 2 running rt? Also it says I need a keyboard..... Does it mean a USB keyboard or can I use my Microsoft soft keyboard?

This will work on rt 8.1 ??

Hey I see you've got a trick to install ublock on edge but the download link is missing, can you give it to us please, it's one of the last things I really need for my tablet to be totally functionnal

I finally managed to install Windows 10 on my Surface RT, and for now it's great! It's a shame that Microsoft didn't update the tablet officially, and that this version is so old that many newer apps don't work, but it's better than nothing!
Some useful informations I learned through the process:
1) Initially I used the recovery image for my language downloaded from Microsoft, and with this image I wasn't able to enable test mode after installing the secure boot policy. I tried the chinese image provided on Yandex (links are in other threads on this forum) and it worked on first try, so use that!
2) Even after enabling Test Mode, if you run the command Confirm-SecureBootUEFI in powershell, it still gives you True as result. I was worried that Secure Boot wasn't really disabled but I was wrong. To confirm that secure boot is disabled you have to enter the command prompt via recovery image and check the right corner of the screen if it says "secure boot is not configured correctly" or something like that. In that case, you can install W10 safely.
3) Some guides are wrong about the file you have to rename to remove the warning about the expiration of the build. The right file is LicensingUI.exe, not LogonUI.exe! LogonUI.exe is responsible for the login interface, if you rename it you won't be able to login on the next reboot, so pay attention!
4) Office 2013 is not activated for me, I tried to install the provided licences many times, but nothing. It seems to work anyway though. There's something I missed?
To be completely satisfied I need:
- a working version of the Crunchyroll app, the one in the store requires a newer build, anyone know how to find it?
- MSN Weather for W10, the one provided is the old W8 app.
- Ad blocker for Edge, someone wrote about sideloading uBlock but didn't share the files.

Does the office 2013 work? I installed it on my Surface RT with the Windows 10 build but it says that it only works on qualifying versions on windows and editing is disabled...

alexenferman said:
Does the office 2013 work? I installed it on my Surface RT with the Windows 10 build but it says that it only works on qualifying versions on windows and editing is disabled...
Click to expand...
Click to collapse
I was able to install it and getting working 100%...... there's another tread that's for installing windows 10 on surface 2 tablet and there's a link in the OP for a mega folder that contains the office 360 files and in it a file that edits the registry

Hello. I can also confirm that it works. I have installed Win 10RT and very happy with it. It really brings a lot of new experience to our tablet as same as a bit faster response.

If you want to use an adblock for Edge, the only one that works is Adblock, directly from the Store. However, adblock support in this build of Edge is very buggy, it eats a lot of ram (sometimes leading to crashes) and some sites fail to load with adblock enabled. So I suggest to install it and to manually acrivate/deactivate it when needed.
Speaking of the Store, I found a bug, at least for me: the install button works only for the apps you already own. So, if you want to install an app you never downloaded, you have to acquire it first on another PC and then on the Surface RT.

Does someone know how to make the the newer Microsoft store (Provided by @_CNR_)to work?
I installed it but however, it won't install any app because of a licence problem probably...
(The older store worked but it does not include all of the apps for example myTube)

If everything goes wrong can I just download a recovery image for 8.1 and install it again?

Winroque said:
If everything goes wrong can I just download a recovery image for 8.1 and install it again?
Click to expand...
Click to collapse
If everything goes wrong. Just boot from the recovery USB stick and reimage the Windows 8.1 using the same dism apply image method.

Does someone have the uBlock archive? There's no link in the OP

nar001 said:
Does someone have the uBlock archive? There's no link in the OP
Click to expand...
Click to collapse
There you go! https://drive.google.com/open?id=18pyeDlRMpB0jF_36DJqdhF_Ybmy0eeRD
If you want to sideload more apps manually you can check my application I made recently: https://forum.xda-developers.com/windows-8-rt/rt-general/arm-rt-app-store-windows-10-rt-t4067813

Ok so I'm attempting to follow this tutorial and the other one for my original surface rt. Where is the wim for windows 10? Those instructions don't seem clear to me, or am I supposed to use the surface 2 image?

kmccmk9 said:
Ok so I'm attempting to follow this tutorial and the other one for my original surface rt. Where is the wim for windows 10? Those instructions don't seem clear to me, or am I supposed to use the surface 2 image?
Click to expand...
Click to collapse
The wim is in that folder https://yadi.sk/d/mnCUeGKWm1XTXA

nar001 said:
The wim is in that folder https://yadi.sk/d/mnCUeGKWm1XTXA
Click to expand...
Click to collapse
Ok I see. I ran into a different issue. I went to do the Windows 10 install today but to my surprise, I couldn't boot up. Luckily I still had my Windows 8.1 Full Recovery USB. But, for for some reason from the advanced troubleshooter, it tells me my USB device is invalid. Has anyone run into this before?

Can be updated to Windows 10 version 1909?

AmznUser444 Dev said:
Can be updated to Windows 10 version 1909?
Click to expand...
Click to collapse
Of course not, the only build of ARM32 Windows 10 we have is this one, and it's leaked.

Wow, really cool!
I would like to know if the cameras work in windows 10? Thanks so much!