Hi everyone...
I have recently flashed my SGS with this JPK ROM and when i was about to change my CSC i saw that i can't see this folder that i need to change it: /system/csc
Using SGS Toolbox under "Check Product Code" i have "Active" both in "Product Code in nv_data.bin" and "Product Code in backup .nv_data.bin"
Can anyone help me and tell me what to do so that i can see and browse /system/csc folder? What can be the problem with my phone? What can i do to solve this?
Related
This S8500XPKH1_OXC firmware is only for Spain and Portugal.
Tested FOP and TPH and both worked excellently.
Call Recorder is activated, so you can record your calls.
Socialhub premium is activated.
Just install and select your csc from pre-Configuration setting.
Remember to set debug level to "Low".
Enjoy.
Download from here: http://www.megaupload.com/?d=8VQ63YHY
NOTE: For Greece, it is not possible to use this firmware now.
Either that the language pack for Greece is missing in bada 2.0 firmwares,
or that the location of the language files has been changed;
thus the normal OXC pre-Configuration does not work for Greece csc files, e.g. EUR, CYO, COS.
The phone will go into an endless loop trying to find the none-existing Greece files.
So please don't select any of the csc for Greece when in pre-Configuration page.
can u make it shp+palringo as IM
can u give a quick guide on how u enabled these? i have already downloaded the original from samfirmware
1. To enable call recording, use Trix to dump and edit the csc file as follows:
a. Open the folder SystemFS => Settings => PreConfiguration => Default => Registry...
b. Inside the "Registry" folder, look for a file called "ShpCSCFeature"
c. Right-click the ShpCSCFeature.ini file and click Edit (or simply open with Notepad).
d. Inside the ShpCSCFeature.ini file you will see the folloing text:
#DEF
SHP_CSC_FEATURE_NAME_ENABLE=1
SHP_CSC_FEATURE_NAME_DISABLE=0
e. Simply add "SHP_CSC_FEATURE_RECORD_VOICE=1" as a third line to the above.
f. So you will now have it as below:
#DEF
SHP_CSC_FEATURE_NAME_ENABLE=1
SHP_CSC_FEATURE_NAME_DISABLE=0
SHP_CSC_FEATURE_RECORD_VOICE=1
g. Save and and upload yoiur files with Trix. That's all.
NB: It's easier to do this with STune. But for now, STune does not work with bada 2.0.
2. To enable socialhub premium, you need to edit the shpp.app and csc files.
3. To have a different csc like OXC, you need to create the csc yourself.
(for more detailed information about nºs 2 and 3 above,
please there are full tutorials on them in this forum. Search and you will find them).
Edit: STune 1.06 works fine in bada 2.0. (earlier version)
STune 1.07 does not work with bada 2.0 (latest version)
if i set it to KOR does SHP works?
davidmclaren said:
if i set it to KOR does SHP works?
Click to expand...
Click to collapse
Unfortunately no. The KOR csc has no socialhub
@spacks thanks a lot. about trix......everything works fine until i say upload files and i cant find the file in the output folder.
i managed to do it via stune but then after 1 hour......samsung said u r not registered for shp and everything shp related dissappeared.
can u give me gmaps without keyboard
waveboy said:
@spacks thanks a lot. about trix......everything works fine until i say upload files and i cant find the file in the output folder.
i managed to do it via stune but then after 1 hour......samsung said u r not registered for shp and everything shp related dissappeared.
Click to expand...
Click to collapse
To activate socialhub premium, you need to dump the ShpApp.app files. STune cannot do this. You need to use either TriX or WaveRemaker. The latler is beeter and easier. With Wave Remaker, you can do it this way:
1. Launch WaveRemaker, then drag and drop the ShpApp.app file.
2. Browse to Osp => Applications =>2482tqy39g => Data...
3. Inside Data, replace the clientstrings-en_US.lan file (with another one that is working)
4. Now click File => Save File (save the file with same name, i.e, ShpApp.app)
5. That's all. The newly created file will be inside the
NB: Remember you need to edit the csc file too. STune can do this.
For bada 1.2, you need to edit the FFs file as well. In bada 2.0, only the Shpp.app file.
Hi spacks, one question: can I enable call recording function on Wave 8500, bada 1.0 cos' my phone is locked on T-Mobile Macedonia network? Thanks firmvare S8500XXJH3/S8500XFJH2
dragi1973 said:
Hi spacks, one question: can I enable call recording function on Wave 8500, bada 1.0 cos' my phone is locked on T-Mobile Macedonia network? Thanks firmvare S8500XXJH3/S8500XFJH2
Click to expand...
Click to collapse
I am afraid no.
Call Record function is only available in few firmwares of India and Turkey in bada 1.2.
If you wish to enable call record in any other firmware, it may be necessary to borrow the apps_compressed.bin file from the India or Turkey firmware. Doing this, you will have a mixed firmware and kies will not be able to update your phone again. So it's not advisable.
In bada 2.0, it's possible. Just follow the instructions stated earlier in this topic.
Cheers!
Thanks man
Does SocialHub Premium still work for bada 2.0? =/
hello,just he;p my friend upgrade her wave 2 to bada 2.0 ~S8530ZCLB4_S8530OZCLB4_CHN~but now only have one problem is can't login to market~cause it only recognize~chn network provider~she using the malaysia provider~is that any tools or solution~i have found some one from others chinese forum they change the same fw~to allow login taiwan market
If You know Firmware editing Did it
Dump .FFS file With Wave_Remaker and Follow This
SystemFS<User<OspSys<registry<Service.ini
Open Service.ini You See chn.ospserver.net Change it To www.ospserver.net
after save .ffs file and Full Flash Your Phone
hero355 said:
If You know Firmware editing Did it
Dump .FFS file With Wave_Remaker and Follow This
SystemFS<User<OspSys<registry<Service.ini
Open Service.ini You See chn.ospserver.net Change it To www.ospserver.net
after save .ffs file and Full Flash Your Phone
Click to expand...
Click to collapse
TQ for reply,but after i dump~edit~but after save~the files is in 0kb~how? just try the other wave remaker~0.2.2version can success save but~when try to verify the service.ini~still~chn.ospserver.net problem solved,THANKS
is it possible to port the statusbar with PacketData of CZLB4 to any other Firmware?
flo2204 said:
is it possible to port the statusbar with PacketData of CZLB4 to any other Firmware?
Click to expand...
Click to collapse
Quick Panel (status bar) is controlled by many files:
1) Rsrc1 > System > Rsrc > Black:
- QuickPanelBmp.rbm
- VoiceMemoQuickPanel.rbm (?)
2) ShpApp > SystemFS > SHP > QuickPanelApp.so (and also code in GeneralSoInfo.so.sig)
3) CSC (this is the problem! ) > CSCrcs > SystemCSC > String > QuickPanel.rsr
So, I try to change those files, but I'm not able to change status bar, maybe because there are other files that I don't know, or maybe because it's not possible to change those files (Wave loop, restart again and again).
Someone can help us?
Thanks!
thx for testing
did you tried to replace these files with the files of the CZLB4
sry can't test it myself at the moment
Tested.It gives boot loop
I tested it too. No problem with RCS (QuickPanel.rsr), and RC1(*.rbm) files
the problem is code in QuickPanel.so is not compatible with some others libraries
We can compare so from with and without 5th option and then edit code to fitbut who dares?
For me better option would be GPS on/off
How ? Just waiting for you
thx for testing
b.kubica said:
I tested it too. No problem with RCS (QuickPanel.rsr), and RC1(*.rbm) files
the problem is code in QuickPanel.so is not compatible with some others libraries
We can compare so from with and without 5th option and then edit code to fitbut who dares?
For me better option would be GPS on/off
Click to expand...
Click to collapse
I prefer "Data" But thanks for your work!
Do you think it's possible to make compatible QuickPanel.so? Thank you so much b.kubika!
in the QuickPanel.rsr of zclb4 is the "Data Button" called "IDS_QP_BUTTON2_DATA_ON_OFF"
this file should be somewhere
if we find this file we could add this to another fw
and in any other file should be something which load the command for enable or disable these things
Edit1:
what about to replace in the customFW "GeneralSoInfo.so.sig" the signature of the Custom with the ZCLB4 and then replace the "QuickPanelApp.so" with ne ZCLB4?
.rsr file is not the problem
I edited that file to make it support my own language and got the boot loop too
So please be quite for a while and let b.kubica do his magic
Yes it is .so file issue & I don't have enough skills to deal with it
Best Regards
its not a file, just string ID
Some steps:
1. change RCS - QuickPanel.rsr from ZC work on XX - only strings are missed but phone works
2. change RC1 - 2 *.rmb files - phones works normally, only graphics are missed
3. change *.so file - phone won't start normally - boot loop
some libraries from XX are not compatible with QuickPanel.so from ZC
that's all for now
b.kubica said:
its not a file, just string ID
Some steps:
1. change RCS - QuickPanel.rsr from ZC work on XX - only strings are missed but phone works
2. change RC1 - 2 *.rmb files - phones works normally, only graphics are missed
3. change *.so file - phone won't start normally - boot loop
some libraries from XX are not compatible with QuickPanel.so from ZC
that's all for now
Click to expand...
Click to collapse
Thanks kubika I'm sad
However I've got two Samsung Wave, one is the tester! If you want you can use it.
ok thx
Any News ?
i'd like to try somethink but i need the wave of my friend
maybe in 1 or 2 days...
Still no solution?
I have seen some CFWs that already added it, anyone know?
Forgive me if i'm barking up the wrong tree here, i've seen the system/customize dir on my phone and can see that is where the branding info seems to be (tmob) inside the default.xml file. Anyone know if its possible to change the values to "become" unbranded?
For example change where it says TMO_HD_bootanimzation.zip to hTC_bootup_one.zip in system/CID/default.xml and other values.
Thanks in advance.
Hey,
I have a GN2 and i finally found a very good rom: [ROM][XXDME1][13 May][Jelly Bean 4.1.2]{~BoBCaTROM_SGN2_v9.0_MultiUI~}|OTA Update.
The problem is that i cant find how to change the csc.
In the rom explanation it said MultiCSC but i can't find the option for changing the csc.
And also the dialer codes does not work...
When i use the built in dialer code app and want to know the PDA/PHONE/CSC-Version supersu opens up, the only thing that works is to view my IMEI number.
So my question:
How or where can i change my CSC.
Or how to get the dialer code to work, so i can change csc tru those codes.
I hope you guys can help me.
Greetz.